Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.3 LAccepted-AOC POST MISAMARI DIST SONITPUR ASSAM 784 506 | SONITPUR | ASSAM | 784506 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹32.1 L+₹6.6 L (25.9%)Rejected-Finance | L2 | Rejected-Finance NOT BEING LOWEST | |
| 3 | L3₹32.8 L+₹7.3 L (28.7%)Rejected-Finance CAMP AT GORUBANDHA MISSAMARI ASSAM 784506 | SONITPUR | ASSAM | 784506 | L3 | Rejected-Finance NOT BEING LOWEST | |
| 4 | L4₹37.9 L+₹12.4 L (48.8%)Rejected-Finance HARIGAON PO NIKAMUL SATRA DIST SONITPUR ASSAM PIN 784001 | SONITPUR | ASSAM | 784001 | L4 | Rejected-Finance NOT BEING LOWEST |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
20 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE MISAMARI
PO-Missamari Dist-Sonitpur Assam
REPAIR/REPLACEMENT OF CERTAIN MISC B/R WORKS UNDER GE MISSAMARI
2022_MES_570790_1
8325
Open Tender
Civil Works
Item Rate
270 days
GE MISAMARI
PLEASE REFER TENDER DOCUMENTS
2 documents required · 2 mandatory
₹500
Yes
GE MISAMARI
₹96,000
Yes
16 May 2023
23 Dec 2022
23 Jan 2023
23 Dec 2022
20 Jan 2023
6 Jan 2023
Amount
Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames), complete all as specified and directed.
Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame), complete all as specified and directed.
S&F for anodised Alum sliding window and ventiletor frame made up 62 mm /29.5 mm 1.5 mm thick aluminium section & shutter made up 38 mm / 20 mm/1.5 mm thick without sash bar alum section including all necessary joining cleats,hold fast ,rubber gasket anodised snap beading,anodised alumn fittings,suitable alumn handle and locking arrangment etc complete all as specified and directed.
S&F for 3 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sqm in each pane, complete all as specified and directed.
S&F in repair aluminium wire cloth with 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium stapple complete all as specified and directed.
S&F aluminium wire cloth with 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium stapple, complete all as specified and directed.
S&F anodised aluminium grill ( anodised trasparent or dyed to required shade according to IS 1868 with minimum anodic coating of grade AC15 of approved design/pattern with approved standared section and fixed to the exising windows frame with CP brass/ stainless steel screws @ 200 mm centre to centre ,complete all as specified and directed.
S&F facroty made Second class hard wood kiln seasoned and chemically pressure treated plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.
S&F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides, complete all as specified and directed.
S&F for 35 mm thick factory made Second class hard wood kiln seasoned and chemically pressure treated Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc, complete all as specified and directed.
S&F 100 mm long medium weight, galvanised mild steel Butt hinges and fixed type B-21, complete all as specified and directed.
S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.
S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.
S & F 300 mm long aluminium sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts, complete all as specified and directed.
Supply fix in repairs Harrison rails, mild steel, chromium plated fixed alongwith 2 Nos. of brackets, stops, rollers etc, complete all as specified and directed.
M&L for Plain Cement Concrete (1:2:4) Type B1 (using 20 mm graded granite stone aggregate) as in hold fast, complete all as specified and directed.
S&F mild steel flat iron of size 50x3mm as in hold fast, complete all as specified and directed.
Preparation of new or previously treated wood surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of pink primer over applying two coat of synthetic enamel paint, complete all as specified and directed.
M&L for preparation of old decorated plastered surfaces of walls and applying one coat of white wash, complete all as specified and directed.
M&L for preparation of old decorated plastered surfaces of ceiling and applying one coat of white wash , complete all as specified and directed.
M&L for Preparation old decorated plastered surfaces of wall and applying one coat of cement base paint , complete all as specified and directed.
M&L for Complete removal of existing old treatment as in wall and applying two coat of cement base paint , complete all as specified and directed.
M&L for preparation of old decorated plastered wall surface applying One coat of oil bound distemper on wall , complete all as specified and directed.
M&L for Complete removal of existing old treatment as in wall surface applying two coats of oil bound distemper on wall, complete all as specified and directed.
Material & Labour for preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm over new surface.
Material & Labour for preparation of old wall surface applying one coat of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm .
M&L for Complete removal of old surface for preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm , complete all as specified and directed.
M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint ,complete all as specified and directed.
M&L preparation of old painted iron/steel surface , CGI/PGI steel roof sheets, over 10cm in with or girth and applying one coat of synthetic enamel roof paint , complete all as specified and directed.
Taking down cement plaster including racking out joints, hacking for key scrubbing down with water etc including removal of rubbish material from site, complete all as specified and directed.
M&L for rendering in cement mortar (1: 3), 5mm thick as in ceiling finished even & Smooth without using extra cement, complete all as specified and directed.
M&L for preparation of newly plastered surfaces of ceilings and apply three coats of white wash, complete all as specified and directed.
M&L Rendering, 20 mm thick in CM 1:4, in two layers, first 10mm thick base coat followed by second coat of 5 mm thick plaster mixed with approved liquid Water proofing compound @ 200ml per bag of cement complete.including finishing even & smooth without using extra cement. Note : WPC shall be measured and paid separately, complete all as specified and directed.
M&L for 15 mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement, complete all as specified and directed.
Supply only for water proofing compound.
M&L for preparation of new plastered surfaces of walls and applying two coats of acrylic distemper including one coat of chalk whiting on plastered surface to prepara-tory to distempering , complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer , complete all as specified and directed.
M&L applying a coat of 1mm thick wall care putty over plaster surface to prepare the surface even and smooth as per manufacture instruction complete complete all as specified and as directed.
R D ENTERPRISE
Saraswati Auto Works
Markson
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .