Loading…
Loading…
Tender Value
₹94.7 L
EMD Value
₹1.9 L
Closing Date
1 Sept 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
GENERAL
15 conditions · 4 needing a document upload
Financial Eligibility Criteria:(As per advance correction slip No.1 of GCC April 2022) The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB of GCC-April-2022 along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Annexure V & VA :- As per Clause 6.1 Part-1 of GCC- The tenderer shall submit a copy of certificate (Enclosed as Annexure-V) stating that all their statements/documents submitted alongwith bid are true and factual. Non submission of above certificate by the bidder shall result in summarily rejection of his/their bid.
The minimum Eligibility Criteria: for costing more than 50 lakhs :- Applicable. 10. Eligibility Criteria: 10.1 Technical Eligibility Criteria: (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b (1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract
Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. 10.1Definition of similar works : The criteria for similar nature of work for said tender is given below as CEE/JBP's L. No. WCR/L/10/Similar Nature/3689, dtd. 11.04.2012. similar nature of work criterion for Electrical General Service (GS) for Electrification work in Electrical department of WCR shall include works executed with Central Government, Semi Government/PSUs of Central Government and/or State Governments have been defined as under :- (a)The level of skills required in following work of electrification is almost same. (a) Electrification of service buildings. (b) Electrification of staff quarters, offices. (c) Electrification of offices. (d) Electrification of road & colony lighting. (e) Electrification of circulating area lighting. (f) Erection & commissioning of LT, HT upto 33 kV overhead mains. (g) Sub-station installations & commissioning. (h) Electrification of washing pits, Sheds & Workshops etc. (i) Any above work or combination of (a) to (h) above.
31 conditions · 3 needing a document upload
Labour Cooperative Societies shall submit only 50% of bid security for which the tenderers are required to upload Registration certificate issued by appropriate authority without which their offer will not be considered. Such firms should also declare that -" We are a Labour Cooperative Society and our Registration No. is .................... with .......................and hence required to deposit only 50% of Bid Security
Any firm recognized by Department of Industrial Policy and Promotion (DIPP) as 'Startups' shall be exempted from payment of Bid Security on submission of Registration Certificate issued by appropriate authority. For such firms it is required to upload a copy of Registration Certificate issued by appropriate authority without which their offer will not be considered. Such firms should also declare that - I/We am/are a Startup firm registered by ........................ Department of Industrial Policy and Promotion (DIPP) and my registration number is ................ valid upto ...................... (Copy enclosed) and hence exempted from submission of Bid Security.
THE OFFERS WITHOUT EARNEST MONEY EXCEPT IN CASE OF EXEMPTION CLAIMED AS PER COMMERCIAL COMPLIANCE OF NIT WILL BE SUMMARILY REJECTED.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Performance Guarantee: - Additional 5% PG to be submitted if tender awarded more than 5% below(Ref : para-4 of Rly. Bd. L.No.2022|CEUCTIGCC2022[ POLICY/Pt.I (E-3320424), Dated13.03.2026.
This tender complies with Public Procurement Policy (Make in India) Order 2017, dated 15/06/2017, issued by Department of Industrial Promotion and Policy, Ministry of Commerce, circulated vide Railway Board letter no.2015/RS(G)/779/5 dated 03/08/2017 and 27/12/2017 and amendments/ revisions thereof.
WRS Kota:- Augmentation of electrical infrastructure in WRS Kota
EL-50-328-2026-27~WCR
EL-50-328-2026-27
Open
Works - General
8 Months
Kota, Rajasthan
₹0
₹1.9 L
7 Aug 2026
7 Aug 2026
18 Aug 2026
61 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 94,73,676.1 | ||
| — | 3.00 | — | — | ||
| Supply ,Erection ,wiring, testing and commissioning of HT vacuum circuit breaker 11 KV ,800 Ampere VCBs (the Supplied 03 VCB should be arranged in such a set of one incoming and two out going VCB, Erection, wiring, testing and commissioning of HT Vacuum Circuit breaker 11 kV, 400 to 800 Amps. with standard fitting as per IS 13118/ 1991 or latest along with power pack as per details. | — | — | — | 17,11,569 | |
| — | 3.00 | — | — | ||
| Supply, Installation, Testing &Commissioning of11 KV Outdoor type extensible 03 way Ring Main Unit (RMU) Floor Mounted, Consisting of 02 no. Incoming 630Amp. Fixed Manual Load Break Switch and 01 no. Outgoing Fixed Manual Vacuum Circuit Breaker as per attached Detailed Technical Specification. | — | — | — | 16,79,535 | |
| — | 10.00 | — | — | ||
| Supply and spreading of gravels/ballast as per explanatory notes | — | — | — | 16,620 | |
| — | 1000.00 | — | — | ||
| Laying ,testing and commissioning of 3 core 120 Sq mm HT XLPE cable- suitable for voltage grade 6.35/11Kv earthed system ,3 core aluminium conductor with armoured, screened cable having valid BIS CM/L No. confirming to IS 7098-part 2:2011 latest. Make - Rihno, Havells, Polycab, Syska wires and cable, RR Cables, Havells ,V mark ,KEI, Poly cab or similar. AVOCAB IS 7098: PART 2: 2011 CM/L 7200031384 tsNote - Cable will be supplied by Railway. | — | — | — | 34,110 | |
| — | 8.00 | — | — | ||
| Supply, Erection and fixing of 11 kV cable end box outdoor type heat shrinkable type for 11kV XLPE 3 core 120 sq mm size | — | — | — | 29,012 | |
| — | 4.00 | — | — | ||
| Supply and erection of 11 KV cable Straight through jointing kit heat shrinkable for 3CX120 sq. mm, 11 KV HT cable, operating temp. at 80-90 degree Celsius, with maximum AC stand voltage 25-30 KV. | — | — | — | 32,244 | |
| — | 2.00 | — | — | ||
| Supply, Erection, testing & commissioning of GO switch 11KV 400 Amp 3-pole with 9 Nos insulators operating handle along with locking arrangement system hot deep galvanized vertical type. | — | — | — | 55,066 | |
| — | 2.00 | — | — | ||
| Supply ,Erection, testing & commissioning of DO switch fuse 11KV 400 Amp pole operated outdoor vertical mounting expulsion type having hot deep galvanized base post type insulator and fibre glass fuse carrier | — | — | — | 36,365.2 | |
| — | 1.00 | — | — | ||
| Supply, fabrication, erection, testing & commissioning of Centralized foot mounted LT power panel (440 Volts) type. The panel should have 1600 Amps bus bar current carrying capacity with one number incoming feeder of ACB 1250 Amps and six numbers outgoing feeder as ACB 630 Amps each. It should have three phase energy meter/load manger indication lamp (LED), cable glands as per cable size etc. complete in all respect with latest IS. The panel should be designed according to site condition. | — | — | — | 10,92,629 | |
| — | 2.00 | — | — | ||
| Fabrication & supply, erection and testing of LT Distribution panel with stand as under, INCOMING CIRCUIT-01 No. MCCB 4 pole 630 Amp. 65 KA MP based LSIG Adj. O/L Adj. S/C. Ampere meter with selector switch -01 no., voltmeter with selector switch -01 no., indication lamp RYB 03 nos., Change over 01 no., Energy meter - 01 no., CT 800/5- 03 nos., Copper bus bar 600 Amp. Rating- 01 set, MCB 6A SP C 10KA - 04 nos.. OUTPUT CIRCUIT- 04 no. MCCB 3pole 200 Amp. 25 KA TNID,08 no. MCCB 3pole 100 Amp. 25 KA TI'dD. All I'flCCBin outgoing circuit will provided with HRC Fuse etc. as per attached detailed specification | — | — | — | 13,91,816 | |
| — | 1400.00 | — | — | ||
| Laying, testing and commissioning of all size of LT PVC/ XLPE insulated stranded conductor cable. The cables to be laid in existing trench/ air/ pipe and connection with crimped lugs & cleating of the cable. Note - Cable will be supplied by Railway. | — | — | — | 41,160 | |
| — | 1200.00 | — | — | ||
| Digging of trench in all type of soils/ road cutting 100 cm. deep and 50 cm. wide. B class bricks on both sides and top of the cable are to be provided. Brick length to be kept across the length of the cable including refilling the trench after laying of cable. Payment for trench will be made on flat rate basis, if it is dug more or less by 1 meter, payment will be made proportionately. | — | — | — | 2,07,048 | |
| — | 200.00 | — | — | ||
| Digging of trench in pucca trench in yard/ platform 50 cm. deep and 35 cm. wide including re-plaster on surface by cement concrete after laying of cable. Wherever the digging of trench to full size is not possible, measurement will be proportionate to the actual volume of cross section and length of the trench. | — | — | — | 55,000 | |
| — | 100.00 | — | — | ||
| Drilling of Horizontal bore below track/road by pushing method for laying of HDPE/DWC pipe of various size | — | — | — | 4,81,845 | |
| — | 10.00 | — | — | ||
| Supply of material & Erection of Maintenance Free Earth Electrodes station as per RDSO Specification No. RDSO/Spn./197/2008 or latest as per attached detailed specification. Earth value will be taken by the contractor in the presence of Railway representative and written on the earth pit by the contractor. | — | — | — | 1,54,810 | |
| — | 8.00 | — | — | ||
| Supply of material &providing GI. pipe earthing arrangement by digging the pit as per DRM/KTT's Drg. | — | — | — | 23,448 | |
| — | 8.00 | — | — | ||
| Supply & fixing of 9 mtrs long steel joist pole size 175 mm X85 mm approx weight 19.1Kg/m | — | — | — | 1,66,200 | |
| — | 100.00 | — | — | ||
| Providing, fabrication & erection of MS angle/channel size 100x50x6mm complete with fixing by MS clamps size50x6mm fixtures and hot dipped galvanized GI bolts, nuts, washers of 16mm dia confirming to relevant ISS. MS channels, clamps, fixtures are to be painted with two coats of red oxide primer and then two coats of aluminum paint. | — | — | — | 7,350 | |
| — | 2.00 | — | — | ||
| Supply of material, fabrication, erection, testing and commissioning of 12.5 M high mast totally hot dip galvanized and suitable for wind velocity bas par IS 875part-3. The mast shaft shall be in two finished sections. It shall also include accessories for 12.5 M high mast including head frame, steel wire rope6mm dia (7/19 construction)single drum which ,Galvanized Lantern carriage arrangement suitable for 6 luminaries symmetrically and it control gear boxes and lighting final with integral power tool along with accessories as per detailed specifications attached. The mast shall have one longitudinal weld and single dipping (hot dip galvanized)as per section without luminaries as per detailed technical specification attached | — | — | — | 3,47,746 | |
| — | 16.00 | — | — | ||
| Supply and installation of LEDFLOOD Light Fitting 100/150 watt complete suitable for 230 VAC 50 HZ as per detailed technical specification attached. | — | — | — | 1,67,302.4 | |
| — | 20.00 | — | — | ||
| Supply and Installation, fixing of Octagonal pole/pole of 3 meter(approx.) height Double Arm Type capable of fixing of LED light fitting and should have inbuilt junction box. The material should be of relevant IS and design as per site conditions (Note:- Designs hould be approved by railways before supply by competent authority.). The Pole should be complete in all respect as per explanatory notes. | — | — | — | 1,98,400 | |
| — | 40.00 | — | — | ||
| supply, installation & testing of outdoor type, street light, LED light fitting 18 Watts and making connection with existing light point. Fixing should be performed as per site requirement | — | — | — | 86,920 | |
| — | 2.00 | — | — | ||
| Supply ,Erection, testing & commissioning of 11KV gapless metal oxide lighting arrester complete with hardware, fixtures, hot dipped galvanized pin, nut, bolts, washers etc to relevant ISS | — | — | — | 19,130 | |
| — | 5.00 | — | — | ||
| Supply of materials & Providing copper plate earthing arrangement by digging the pit with copper plate size 600x600x3mm as per drg. No.DRM/Kota/01927/ELR. Earth value will be taken by the contractor in the presence of Railway representative and written on the earth pit by the contractor. | — | — | — | 53,405 | |
| — | 0.50 | — | — | ||
| Supply & Erection of material for fabricated steel work other than mast with SPS as per explanatory notes. | — | — | — | 56,140.5 | |
| — | 50.00 | — | — | ||
| Supply and erection of concrete for foundation and plinth in hard soil & rock as per explanatory notes. | — | — | — | 3,47,500 | |
| — | 20.00 | — | — | ||
| Supply and erection of concrete for foundation and plinth in other than hard soil 15 & rock as per explanatory notes. Supply and Erection of 16 reinforced concrete for cable trench cover etc as per explanatory notes. | — | — | — | 1,33,420 | |
| — | 40.00 | — | — | ||
| Supply and Erection of reinforced concrete for cable trench cover etc as per explanatory notes. | — | — | — | 89,400 | |
| — | 100.00 | — | — | ||
| Supply and erection of fencing panel & gates at sub-station as per explanatory notes. | — | — | — | 3,64,600 | |
| — | 5.00 | — | — | ||
| Supply and erection of fencing up right as per explanatory notes | — | — | — | 3,93,885 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC_April-2022_Final.pdf
ATTACHMENT
AnnexureLC-Inclusionofletterofcredit.pdf
ATTACHMENT
Annexure-E.pdf
ATTACHMENT
Classification Annexure VofGCCwith
ATTACHMENT
DempoymentofEngineers.pdf
ATTACHMENT
SpecificationofLEDLuminare-2026-1.pdf
ATTACHMENT
MakeinIndiapolicylatestamendment.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo11_11zon.pdf GCC Advance correction slip 11
ATTACHMENT
CorrectionslipofGCC_11zon.pdf
ATTACHMENT
augmentationofelectricalinfrastructure.pdf tender documents
ATTACHMENT
Clarification-Annexure-VofGCCwithTenders.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo11_11zon.pdf
ATTACHMENT
augmentationofelectricalinfrastructure.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].