Special repair of Gove. Ayurvedic Herbal Store at Joginder Nagar District Mandi (H.P.)

Amount

Taking out doors, windows and clerestory windows shutters (steel or wood) including stacking within 20 (twenty) metres lead as per the direction of Engineer-In-Charge including carriage of material within all leads and lifts complete in all respect.

Providing and fixing 40mm (fourty milimeter) thick Second class deodar wood panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws as per the direction of Engineer-In-Charge including carriage of material within all leads and lifts complete in all respect.

Providing Sal wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) as per the direction of Engineer-In-Charge including carriage of material within all leads and lifts complete in all respect.

Providing and fixing 300 x 10 (Three hundred by ten milimeter) aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction of Engineer-In-Charge including carriage of material within all leads and lifts complete in all respect.

Providing and fixing 125mm (one hundred twenty milimeter) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction of Engineer-In-Charge including carriage of material within all leads and lifts complete in all respect.

Demolition above G.L. upto floor two level including disposal of unserviceable materials within 20 Metres lead complete as per the direction of Engineer-In-Charge including carriage of material within all leads and lifts complete in all respect.

Providing and laying cement concrete 1:5:10 (One cement isto five sand isto ten aggregate) graded crushed/broken stone aggregate 40mm (forty milimeter) nominal size mechanically mixed and curing complete, excluding cost of form work in foundation and plinth. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Kota stone slabs 20 mm (Twenty milimeter) thick in risers of steps, skirting, dado and pillars laid on 12 mm (tweleve milimeter) (average) thick cement mortar 1:3 (one cement isto three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing Digital Ceramic tiles 30 × 45 cm (thirty by fourty five centimeter) thick of approved Shade and manufacturer in skirting risers of steps and dado 12 mm (tweleve milimeter) thick cement mortar 1:3 (One cement isto three sand) and jointed with cement slurry. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and laying Full Body Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % (zero point zero eight percente) and conforming to I.S.15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm (tweleve milimeter) thick bed of cement mortar 1:3 (one cement isto coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogramme per square meter) including grouting the joint with white cement & matching pigments etc. complete :10mm (ten milimeter) thick full body vitrified tiles of Size of 60x60cm (sixty by sixty centimeter) of Desert series in approved shade of Simple Ceramics/ AGL tiles / Kajaria / Orient Bell. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement : six sand : twelve graded stone aggregate 20mm (twenty) millimeter nominal size mechanical mixed in cement mortor 1:6 (one cement six sand) including curring and carriage of material within all leads and lifts complete in all respect as per direction of Engineer in Charge.

Second class brick work using common burnt clay building bricks in cement mortar 1:6 (one cement isto six sand) in foundation and plinth as per PWD specification including curring and carriage of material within all leads and lifts complete in all respect as per direction of Engineer in Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Second class half brick work using common burnt clay building bricks in cement mortar 1:4 (one cement isto four sand) in sub structure as per PWD specification including curring and carriage of material within all leads and lifts complete in all respect as per direction of Engineer in Charge.

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (two milimeter) (± 0.2 mm) (plus minus zero point two milimeter) , corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm (nineteen by nineteen milimeter) and 1mm (one milimeter) (± 0.1 mm) (plus minus zero point one milimeter) wall thickness and 3 nos.(three number) stainless steel hinges fixed to the frame as per PWD specification including curring and carriage of material within all leads and lifts complete in all respect as per direction of Engineer in Charge.The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

24 mm (twenty four milimeter) thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm (fifty nine by twenty four milimeter) and wall thickness 2 mm (two milimeter) (± 0.2 mm) (plus minus zero point two milimeter) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm (seventy five by two hundred twenty milimeter) having wall thickness 1.0 mm (one milimeter) and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm (twenty by twenty milimeter) and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1mm (one milimeter) (± 0.1 mm) (plus minus zero point one milimeter) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per PWD specification including curring and carriage of material within all leads and lifts complete in all respect as per direction of Engineer in Charge.. (For W.C. and bathroom door shutter).The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

15mm (fifteen millimetre) cement plaster in single coat on the rough side Upto Floor V Level of brick/ concrete/ stone wall for interior plastering upto floor all level including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement isto six sand) as per the direction of Engineer-in-Charge including carriage of materials within all leads, and lifts other incidentals.The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Supplying and fixing 80x1.25 mm (eighty by one point two five milimeter) M.S. laths with 1.25 mm (one point two five) thick top cover rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm (twenty seven point five milimeter) long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Steel work in built up Hot finished welded type tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing 0.60mm (zero point six zero millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster 5 (five) microns over 5 (five) microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-In-Charge including carriage of material within all leads and lifts complete in all respect.The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing ridges or hips 60cm (sixty centimetre) overall with 0.63mm (zero point six three millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating plus back coat of polyster of 5 (five) microns over 5 (five) microns primer coating icluding fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted GI limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer-In-Charge including carriage of material within all leads and lifts complete in all respect.The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing pre-painted sheet valleys 90cm (ninety centimetre) over all of kotar metal single skin trapezoidal profiled sheet 0.60cm (zero point sixty centimetre) thickness having 1060mm cover width over all width 1126mm (one thousand one hundred twenty six millimetre) 28mm (twenty eight millimetre) crest depth at 353mm +2mm (three hundred fifty three millimetre plus two millimetre) C/C crest distance. There will be two ribs at the centre for stiffening heaving crest depth of 2.5mm (two point five milimetre) . The main crest with at top 25mm (twenty five millimetre) and at lower 81mm (eighty one millimetre) base metal of cold rolled steel coil with zinc waiting top with regular modified polysters coating of approved shade and balancing EPDM seal complete in all respect as per approved drawing, design and in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing MS BP sheet 1.66mm to 2mm (one point six six millimetre to two millimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-In-Charge (Base members of steel work shall be measured & paid separately) including carriage of materials within all leads, lifts and other incidental charges.The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing 10mm (ten milimeter) thick phenol bonded prelaminated particle board ceiling of approved shade decorative with hard wood bead out of 40x40mm (fourty by fourty milimeter) and hard wood cornice out of 10x7.5mm (ten by seven point five milimeter) complete.The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing 0.63 mm (zero point six three milimeter) thick corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm (eight milimeter) diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including carriage of materials within all leads, lifts and other incidental charges.The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Making plinth protection 50mm (fifty milimeter) thick of cement concrete 1:3:6 (one cement isto three coarse sand isto six graded stone aggregate 20 mm(twenty milimeter) nominal size) over 75mm (seventy five milimeter) thick bed of dry brick ballast 40 mm (fourty milimeter) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including carriage of materials within all leads, lifts and other incidental charges.The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing under layer for plinth protection of 75mm (seventy five milimeter) thick (unconsolidated) bed dry brick/stone aggregated 40mm (fourty milimeter) nominal size with rammed and consolidated and grouted with fine sand including preparation of ground including carriage of materials within all leads, lifts and other incidental charges.The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing & fixing 4.0 mm (four milimeter) thick glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete including carriage of materials within all leads, lifts and other incidental charges.The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Painting one coat (excluding priming coat) on previously painted wood and wood based surfaces with enamel paint to given and even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping With white enemal paint including carriage of materials within all leads, lifts and other incidental charges.The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Painting on Steel work with two or more coat applied @ 0.90 litre/ 10 sqm (zero point nine liter per ten square meter) over an under coat of primer applied @ 0.80 litre/ 10 sqm (zero point eight liter per ten square meter) of approved brand and manufacturewith Deluxe Multi Surface Paint to give an even shade complete including carriage of materials within all leads, lifts and other incidental charges.The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Distempering with oil bound washable distemper of approved brand and manufacture on New work (two or more coats) over and including water thinnable priming coat with cement primer to give an even shade complete including carriage of materials within all leads, lifts and other incidental charges.The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Prithi Raj Thakur

Anil Kumar