Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance 38 1323 SREEKALA ROAD NEAR ERNAKULAM MEDICAL CENTRE VENNALA P O ERNAKULAM KERALA 682 028 | ERNAKULAM | ERNAKULAM | KERALA | 682028 | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹4.6 Cr
EMD Value
₹1 L
Closing Date
5 Mar 2024, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Superintending Engineer,
Superintending Engineer, PH Circle, KWA, Kollam
Jal Jeevan Mission (JJM)-WSS to Neduvathoor Panchayat - Phase I - Supply, erection and commissioning of 11 KV substation with all accessories ,550 HP VT raw water pump sets and Pumping main fabrication work at intake well, Thengolikadavu.-Supply and
2024_KWA_663740_1
Re T No.220/2023-24/SE/Q
Open Tender
Electrical Works
Item Rate
365 days
Neduvathoor panchayath
As per tender conditions
6 documents required · 6 mandatory
₹8,270
₹1 L
6 Mar 2024
26 Feb 2024
6 Mar 2024
26 Feb 2024
5 Mar 2024
26 Feb 2024
26 Feb 2024 - 5 Mar 2024
Amount
Appendix A:- SUPPLY, ERECTION AND COMMISSIONING OF 11 KV SUBSTATION WITH ALL ACESSORIES.
OD213399/2023-2024:"Statutory Approval - Obtaining statutory approval from Eletrical Inspectorate including preparation of drawings, obtaining approval for the drawings arranging inspection of the installations and obtaining safety certificate etc.after completion of the work.The necessary statutory fees if any payable to the Electrical Inspectorate/ KSEB will be paid by KWA" .(Note: Scheme approval from theElectrical Inspectorate has to be obtained before supplying the equipments. Payment for the supply of materials will be released only on production of scheme approval.)
OD213400/2023-2024::Supply,erection, testing and commissioning of , 1000 KVA, 11KV/3.3KV. 3phase, 50Hz,Dyn 11,. ANON cooled , Indoor type copper wound distribution transformers, with HV and LV side cable end box arrangements, on load tap changer with AVR with 17 tap positions having 5% to -15% variations in1.25% steps with RTCC panel etc. complete with all fittings as per IS 1180 L2 and Kerala Electrical Inspectorate norms and conforming to IS1180 ( Part 1 ). Armoured multi core 2.5 Sqmm copper control cables shall be used for all external & internal interconnections . The cost of control cables both internal and external shall be included in the cost of Transformer." Including automatic OLTC unit
OD213401/2023-2024::Supply,erection, testing and commissioning of , 63 KVA, 11KV/440V. 3phase, 50Hz,Dyn 11,. ANON cooled , Indoor type copper wound distribution transformers, with HV and LV side cable end box arrangements complete with all fittings as per IS 1180 L2 and Kerala Electrical Inspectorate norms and conforming to IS1180 ( Part 1 ). Armoured multi core 2.5 Sqmm copper control cables shall be used for all external & internal interconnections . The cost of control cables both internal and external shall be included in the cost of Transformer.
OD213402/2023-2024:Supply of all materials and providing 2000mm wide 2500mm height weld mesh gate made out of 50 x 50 x 6mm Angles with necessary foundation locking arrangements etc. complete, including painting with two coats of zinchromate primer and aluminium paint as per standards
OD213403/2023-2024:Supply, erection, testing and commissioning of indoor type CT and PT 3 phase 4 wire system 3 phase PT 11KV/110Volt,0.2s,25VAIL 12/28/75KV as per IS3156.CT Ratio 40/5A or as per KSEBL specification on contract demand Burden 10VA,0.2S accuracy class,IL12/25/75 KV as per IS2705 & KSEBL specification,STR 13.1KA/s
OD213404/2023-2024::Supply,erection, testing and commissioning of TOD meter 3phase, 4 wire, HT CT/PT operated, Uni-directional, accuracy class 0.2S for both Active and Reactive energy, -/5A/-/1A, HT static tri vector meter with TOD register,DLMS compliant & AMR compatible with optical and RS232 port, having ISI Marking,suitable for measurement of active energy kWh, reactive energy kVARh and apparent energy kVAh and kVA MD, kW MD at nominal frequency in the range of 47.5Hz to 52.5 Hz in balanced as well as unbalanced load conditions in accordance with IS: 15959 / 2011 with its latest amendments.
OD213405/2023-2024:Supply, erection, testing and commissioning of 11KV, 630A, 350MVA, 26.3KA,3sec totally enclosed, single bus bar, floor mounting in metal clad, indoor extensible type flush mounted horizontal isolation and draw out type vacuum circuit breaker fitted with manual/motor operated spring charge mechanism with 230V AC motor and motor control switch,shunt trip coil of 24 volt DC auxiliary contact 6NO+6NC, Mechanical ON/OFF indicator, Mechanical operation counter, Anti pumping feature, Automatic safety shutters and push button etc, four panel system (1 no. VCB as incomer and 2 Nos. VCBs as outgoings) suitable for installation in 3 phase , 3wire, 50Hz. AC,11kv, effectively earthed supply system,comprising of motorised and spring assisted, independent, trip free closing mechanism and all metering equipments, MC61A numerical protective relays etc. draw out type resin cast 11/0.1 KV & PT with controlling fuses for both side .2 class Dual core CT , LED panel lamps , panel heaters etc complete as approved by Kerala Electrical Inspectorate and relevant standards. Armoured multi core 2.5 Sqmm copper control cables shall be used for all external & internal interconnections.Also the panel should have metering facilities as per kseb specifications The cost of control cables both internal and external shall be included in the cost of HT panel, 11KV Switchgear (Indoor). The incomer VCB shall be provided with tariffTOD meter with 3 nos 60/ 5 Amps class 0.2S 15 VA CT and 3 nos 11KV / 110 Volt class 0.2PT etc including sealing and locking arrangement all civil workssuch as transportation , handling making suitable foundations etc charges for testing calibrationby TMR charges for erection and commissioning is included complete.
OD213406/2023-2024:Supply, erection, testing and commissioning of 3.3KV, 400 A, 350MVA, totally enclosed, single bus bar, floor mounting in metal clad, indoor extensible type flush mounted horizontal isolation and draw out type panel board comprising of 1Nos. Vacuum Circuit Breaker as incomer 2nos. Vacuum Circuit breakers(3 Panel system). The incomer switchgears, & outgoing switch gears should be of draw out type trip free VCBs with suitable overload and short circuit protection releases, suitable UV and shunt releases for probable integration to control wiring including PLC unit and its auxiliary systems for remote monitoring and operation and provision for future up gradation to SCADA, suitable for installation in 3 phase , 3wire, 50Hz. AC, 3.3kv, effectively earthed supply system, comprising of motorized and spring assisted, independent, trip free closing mechanism and all metering equipment, MC 61A high set numerical protective relays, . resin cast,3.3 KV /110/230V PT with control fuse for each incomers 0.2 class dual core CT LED panel indicates digital multi function meters,with minimum features to read V, A, Hz, PF, THD % inall the out going feeders and incomers including suitable CT/PT and protection arrangements ,panel, heaters with timer/RTD based automatic operation , suitable SMF battery and battery charger arrangements etc.. complete as approved by Kerala Electrical Inspectorate and relevant standards. armored multi core 2.5 Sqmm copper control cables shall be used for all external & internal interconnections. The cost of control cables both internal and external shall be included in the cost of 3.3KV panel, 3.3KV Switch gear.
OD213407/2023-2024:Neutral Grounding Resistor, Design,engineering, supply erection,testing and commissioning of indoor type 3.3KV stainless steel make neutral grounding resistor in sheet steel enclosure with IP 23 degree protection with siutable neutral CT for REF protection. The cubicle shall be fabricated out of 3mm sheet steel and painted with anti –rust primer coating followed by two coats of paint of approved shade, as per standards. The resistance shall be of Kerala Electrical Inspectorate and relevant standards. Armoured 2.5 Sqmm copper control cable shall be used for all external interconnections. The cost of control cables both internal and external shall be included in the cost of NGR
OD213408/2023-2024:Lighting Distribution board (LDB), Supply,erection, testing and commissioning of MCB distribution board comprising to the following. 40A TPN 4 pole MCB 1 No. as incomer with 40A 30mA ELCB, 18 nos 6 AMPS SP MCB as outgoings, <br> With tinned copper busbars/cables, interconnection, housed in a suitable metal enclosure as per KEI standards fixed in open system
OD213409/2023-2024:Supply of ISI marked 3 core 300 Sq.mm, 11 kV armoured XLPE AL Cable.
OD213410/2023-2024:Supply of ISI marked 3.5 x 50 sqmm 440 v aluminium cable, 20 mtr, 4c x 2.5 sqmm copper control cable 60 mtr, 3.5 35 sqmm al armoured cable - 25 mtr,4c x 16 sqmm al armoured cable 40 mtr and its terminations
OD213411/2023-2024:Supply and laying,testing and commissioning of fallowing size/suitable size XLPE insulated PVC sheathed Armoured Alluminium conductor cable(3.3kv grade) clamped on wall/ceiling with clamps partly laid in trench and partly in cable tray,3core 240sq.mm,3.3kv grade XLPE Alluminium UG cable laying from transformer LV side to 3.3kv pannel (incomming side)
OD213412/2023-2024:Supply of all materials and providing end termination of the following size/suitable size PVC/XLPE insulated, sheathed armoured Aluminium conductor cable for giving power connections to HT Breaker, Transformers, Panel boards etc. complete as per standards.3 core 240 Sq.mm.3.3kv,XLPE AL Cable(Indoor)
OD213413/2023-2024:Supply of all materials and providing end termination of the following size/suitable size heat shrinkable PVC/XLPE insulated, sheathed armoured Aluminium conductor cable 11kv grade ) for giving power connections to HT Breaker, Transformers, Panel boards etc. complete as per standards. 3 core 300 Sq.mm.11kv,XLPE AL conductor shrinking type Cable kit (Indoor)
OD213414/2023-2024:Supply and laying of 11 kV HT cable of size - 3x150sq.mm XLPE Cable.
OD213415/2023-2024:Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminum conductor cable of 11 KV grade as required: 3x150sqmm indoor end termination -
OD213416/2023-2024:Supply of all meterials and providing end termination kit (Out door type) of the fallowing size heat shrinkable 3x 300sq.mm PVC/XLPE armoured Alluminium conducor cable(11kv grade) for receiving power connection from KSEB 11 KV structure
OD213417/2023-2024:Supply, laying and termination of the following sizes of copper strip/wires for earthing of substation, transformers, HTpanel boards,LT panel boards, equipments and inter connection of earth pits etc. 25x5mm copper strips.
OD213418/2023-2024::Supply and fixing of M.S. angle cable tray for clamping the various sizes of cables in trenches, through walls, & trusses etc. as per KEI standards.
OD213419/2023-2024:Earthing with G.I. earth plate1200 mm X1200 mm X 12 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. The earthing station should confirm to IS 3043/87. (All civil works shall be done by the contractor)
OD213420/2023-2024:Supply and installation of MSB panel board with 100A - 1 nos mccb incomer and 63A 4p MCCB -4nos,EFR,neutral ct, indications,MFM with RS485 1 nos, voltmeter 1 nos, suitable current transformer etc
OD213421/2023-2024:Plant automation using PLC system and scada including valves with actuator, Pressure gauge with rs 485 output,electromagnetic flow meter with RS 485 communication and display and other items required for automation of plant and display of relevant parameters
OD213422/2023-2024:Charges for testing EFR,CT, PT,TOD meter and obtaining certificate from electrical inspectorate including statutory and sundry charges
OD213423/2023-2024:Supply of following protection itesm, fire extinguisher 3 nos, fire bucket 4 nos, 3.3 kv rubber mat 15 sqm, 11kv grade rubber mat 30 sqm,1.1kv grade rubber mat 15 sqm,emergency push button 1 nos, shock treatment chart 1nos, HT hand gloves 1 no, danger boards 5 nos, first aid box 1 nos
OD213424/2023-2024:Supply of all materials and providing substation yard fencing using 50 x 50 x 6mm angle iron frame work of size 1500x2500mm fitted with weld mesh of 10 gauge and bolted the same to 100 x 50 x 6 mm vertical chanel erected at 1500mm c/c and 2500mm above ground level of substation yard and 500 mm below with 300 x300mm plain cement concrete (1:3:6) base using 40 mm granite aggregate and top<br>surface finished neat.&
OD213425/2023-2024:"Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in FRLSont including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings)."
OD213426/2023-2024:Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required - 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
OD213427/2023-2024:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required - Group.B"
OD213428/2023-2024:Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required including cost and conveyence of ceiling fan.
OD213429/2023-2024:Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. - 18/20/24 W four feet LED tube light
OD213430/2023-2024:Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. - 9 /12 W LED bulb.
Appendix B : - SUPPLY ERECTION AND COMMISSIONING OF 550 HP VT RAW WATER PUMP SETS.
OD213397/2023-2024:Supplying and fixing calibrated electromagnetic flow meter of size 500 mm or nearest size with all accessories including UPS with battery for ensuring the unit in operation during power failure occasions in the delivery lines of 500 mm dia DI K9 pipe using suitable pipe and specials, providing all power cable connection and control cables to its control unit, fixing the control unit in convenient location, testing the unit and commissioning the flow meter including excavation required for the work, constructing RCC valve chamber for fixing the meter safely including cost and conveyance of electromagnetic flow meter with all accessories, UPS with battery, pipe and specials required for fixing flow meter in line, excavation charges, construction cost of RCC valve chamber etc. complete as per the direction of engineer in charge.
Appendix C:-LAYING 500 mm MS PIPE FOR CONNECTING PUMP SET DELIVERY LINE WITH 500 mm DIK9 RAW WATER PUMPING MAIN.
15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.
100.1.2:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth exceeding 1.5m but not exceeding 3m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.
100.7.1:Bailing out water with 5HP engine and pump set including conveyance to the site, erecting, dismantling and taking back of engine and pump, cost of fuel lubricating oil and other stores pay of staff etc., complete.
100.37.13.1:In situ fabrication of M.S. pipes of size 500mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.
100.37.13.2:Fabricating M.S. flanges of diameter 500mm using 16mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.
100.37.13.3:Cutting 500mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.
100.37.13.4:Welding 500mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.
100.37.13.5:Grinding cut and weld edges of 500mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.
100.98.499:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.0, Size 300mm.
18.30.11:Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:500 mm diameter pipe
5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size
5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
100.31.2.7:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 300mm diameter, Class II.
10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
OD213398/2023-2024:Interconnecting outlets of VT pump sets with newly laid 500 mm MS line by MS fabrication work including providing flanged joints at outlet valves, "Y" joints at pumping main interconnection point and interconnecting with 500 mm MS pumping main and making anti corrosive paint coating over primer coating in MS pipe surface including cost and conveyance of MS pipe and specials, all labour charges, hire charges of tools etc. complete as per the direction of engineer in charge.
Bidder Name
Tesla Heavy Electricals Pvt. Ltd.
stage.html
html • 0.02 MB
finance_1029674.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .