Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.0 LAccepted-AOC | L1 | Accepted-AOC Accepted due to lowest rates bidder L1 | |
| 2 | L2₹29.6 L+₹1.1 L (3.97%)Rejected-Finance R O VILL RAMNAGAR P O PANCHRUKHI TEHSIL PALAMPUR DISTT KANGRA HP | L2 | Rejected-Finance Rejected due to higher rates bidder L2 | |
| 3 | Rejected-Technical HIMACHAL PRADESH HP | HAMIRPUR | HIMACHAL PRADESH | 174304 | - | Rejected-Technical Non Responsive |
Tender Value
₹25.0 L
EMD Value
₹50,100
Closing Date
1 Aug 2022, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
Executive Engineer, HPPWD Jaisinghpur
C/o Examination Hall at First floor level
2022_PWD_63027_1
Construction of Govt. Sen. Sec. School Gander Tehs
Open Tender
Civil Works - Buildings
Item Rate
60 days
Jaisinghpur
Please refer Tender documents.
14 documents required · 14 mandatory
₹1,500
₹50,100
3 Oct 2022
25 Jul 2022
2 Aug 2022
25 Jul 2022
1 Aug 2022
25 Jul 2022
75 days
Amount
Providing form work with steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetera upto any thickness including carriage of material in all leads, lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Providing form work with steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Columns, Pillars, Piers, Abutments, Posts and Struts up to all width and heights including carriage of material in all leads, lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Providing form work with steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Stairs, (excluding landings) except spiral stair cases including carriage of material in all leads, lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Providing form work with steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights including carriage of material in all leads, lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Providing form work with steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls up to all width and heights including carriage of material in all leads, lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Providing and laying in position cement concrete of specified grade of reinforcement concrete excluding the cost of centering and shuttering finishing and reinforcement- All work up to plinth level : 1:1.5:3 (one cement isto one point five coarse sand isto three graded stone aggregate) 20 mm (twenty millimetre) nominal size in foundation footing bases of coulmn and the like including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in lintels, beams and bressumers, including setting in cement mortar 1:3 (one cement isto three coarse sand), cost of required centering and shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (one cement isto one point five coarse sand isto three graded stone aggregate 20 mm (twenty millimetre) nominal size) complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level 1:1.5:3 (one cement isto one point five coarse sand isto three graded stone aggregate 20 mm (twenty millimetre) nominal size) in foundation and plinth including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Steel reinforcement TATA TISCO/SAIL thermo-mechanically treated bars of grade fe-500 (five hundred) or more for reinforced cement concrete work including straigthening, cutting, bending, binding and placing in position all complete including carriage of material in all leads, lifts and other incidentals and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in foundation and plinth level to all floor level in all shapes and sizes in CM 1:6 (one cement isto six sand) and curing complete including carriage of material in all leads, lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in superstructure above plinth level to all floor level in all shapes and sizes in CM 1:6 (one cement isto six sand) and curing complete including carriage of material in all leads, lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Providing and fixing M.S channels in door and windows frames manufactured from M.S. channel section of 75x40x4mm (seventy five into forty into four millimetre) and M.S flat 75x4mm ( seventy five into four millimetre) in combination as per drawing and design including hinges jamb, lock jamb, beed and if required angle threshold of mild steel angle 50x25 mm (Fifty into twenty five millimetre) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel but hinges 2.5 mm (Two decimal five millimetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by the Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals.The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm (thirty five into thirty five into five millimetre), joints mitred and welded by angle iron 35x35x5 mm (thirty five into thirty five into five millimetre) or 35x 5 mm (thirty five into five millimetre) flat pieces to the existing T iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections ,joints mitred and welded with 16x3.15 mm (sixteen into three point one five millimetre) lugs 10 cm (ten centimetre) long embedded in cement concrete blocks 15 cmx10cmx10cm (fifteen centimetre into ten centimere into ten centimetre) size of 1:3:6 (one cement isto three sand isto six graded stone aggregate 20mm (twenty millimetre) nominal sizeor with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Top hung Ventilators
Side hung windows.
Fixed Steel door
Providing and fixing M.S. grills Fixed to steel windows by welding of required pattern in frames of windows etcetra with M.S. flats, square or round bars etcetraincluding priming coat with approved steel primer all complete. (Fixed to steel windows by welding 35mm ( thirty five millimetre) thick shutter). The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Providing and fixing 35 mm (thirty five millimetre) thick Kiln seasoned and chemically treated hollock wood shutters panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Providing and fixing factory made double steel shutter windows side hunge (one glazed and other wire gauge ) of standard rolled steel section jointing, mitered, welded and manufactured to relevant ISI standard specifications with steel plugs and screws or rawl plugs/ screws or with fixing clips or with bolts and nuts as required and iron fittings , including providing and fixing of glass pans with glazing clips and special metal sash putty for glazed side of shutter and wire gauge of ISI designation 85G (eighty five) with metal beading on other side complete including priming coat of red lead paint as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
6mm (Six millimeter) thick cement plaster in ceiling with cement mortar 1:3 (One cement isto three sand) for all heights as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
15 mm (Fifteen millimeter) thick cement plaster in single coat on rough side of single or half brick /concretes/ stone walls for interior plastering up to all floor levels including arises, internal angles, chamfers and rounded angles not exceeding 80mm (Eighty millimeter) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
12 mm (twelve millimetre) thick cement plaster of mix cement mortar 1:6 (One cement isto six sand) including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Kota stone slabs 20 mm (twenty millimere) thick in risers of steps, skirting, dado, landing and pillars laid on 12 mm (twelve millimetre) (average) thick cement mortar 1:3 (one cement isto three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Providing and laying 600x600mm (six hundred into six hundred millimetre) size double charge / ultra charge Vitrified tiles of Restile/ Nitco/ Rak/ Kajaria/ Orientbell/ Simpolo/ AGL/ Johnson/ Somany as per approved shade and design (thickness to be specified by manufacturer), with water absorption less than 0.08 % (zero decimal zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm (twelve millimetre) thick bed of cement mortar 1:3 (one cement isto three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilograme per square metre) including grouting the joint with white cement & matching pigments etcetra complete, and carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Providing and fixing aluminum sliding door bolts, ISI marked anodized (anodic coating not less than grade AC 10 (ten) as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetra complete including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
250x16 mm (three hundred into sixteen millimetre)
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetra complete. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
250x10 mm (Two hundred fifty into ten millimetre)
150x10 mm (one hundred fifty into ten millimetre)
Providing and fixing aluminum handles, ISI marked,anodized (anodic coating not less than grade AC 10 (ten) as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetra complete including carriage of material in all leads and lifts and other incidentals . The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
125 mm ( one hundred twenty five millimeters )
100 mm ( one hundred millimeters )
Providing and fixing (i) Single socketed pipes 110 mm (one hundred ten millimetre) dia of D-plast or vectus make on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( ten millimeters) gap for thermal expansion, including carriage of material in all leads and lifts and other incidentals . The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Providing and fixing Plain bend 110 mm ( One hundred ten millimeters) Dia on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( ten millimeters) gap for thermal expansionor including carriage of material in all leads and lifts and other incidentals . The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Plain bend 110 mm ( One hundred ten millimeters) Dia
Providing and fixing on wall face unplasticised - PVC 110 mm (one hundred ten millimetre) Shoe moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion . including carriage of material in all leads and lifts and other incidentals . The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Providing and fixing 110 mm (one hundred ten millimetre) unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm (fifty into fifty into fifty millimetre) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement isto four coarse sand) and making good the wall etcetra complete. including carriage of material in all leads and lifts and other incidentals . The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Painting Two or more coats on new work with synthetic enamel paint of approved brand and manufacture to give an even shade including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge in. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matters sand papering and knotting as required with ready mixed paint brushing wood pink primer as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals.
Providing and applying two coats of fire retardant paint on cleaned wood / ply surface @ 3.5 sqm (Three pont five square metre) per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Distempering Two or more coats on new work with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre (fifty grams per litre) , of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Providing and Applying white cement Birla white based putty of average thickness 1 mm ( one millimeters) of approved brand and manufacture over plaster surface even and smooth complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Finishing walls with water proofing cement paint of required shade New work (Two or more coats applied @ 3.84 (three point eight four) Per Kilogram/10 (ten) Per Square Metre including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Providing and fixing railing for stair case having baluste 19x10 mm (nineteen into ten millimetre) and 12mm (twelve millimetre) M.S. flat solid square bars with a clear height at 85 cm (Eighty five centimetre) @ 60cm (Sixty centimetre) jointing in cement concrete step and joining with electric gas welding at top alongwith hand rail of M.S. hollow rectangular pipe 60x40cm (sixty into forty) centimetre complete with applying a coat of red lead paint as per specification and direction of Engineer in charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Sunil Walia
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .