DAY TO DAY MAINTENANCE AND PETTY REPAIR OF B/R WORKS INCL INTERNAL WATER SUPPLY AND REPAIR/REPLACEMENT OF INTERNAL WIRING FITTING AND FIXTURES, REPLACEMENT OF FTL/CFL FITTING TO LED FITTINGS AT MISA CAMP UNDER GE (S) TEZPUR

Amount

Taking down chowkhats incl shutters (without taking off shutters from the frame exc 1.5 sqm and n.exc 4 sqm each.All as specified and as directed by Engineer-in-charge.

Taking down chowkhats incl shutters (without taking off shutters from the frame n exc 1.5 sqm.All as specified and as directed by Engineer-in-charge.

Taking down shutter of any description exc 1 Sqm but n'exc 2 Sqm each.All as specified and as directed by Engineer-in-charge.

Taking down cement plaster on brick walls incl racking out joints, hacking key & scrubbing down with water.All as specified and as directed by Engineer-in-charge.

Demolition cement concrete n'exc 15 cm thick (below or above ground level) All as specified and as directed by Engineer-in-charge.

Dismantling floor, hearth or all tiling including cement mortar bedding (but not backing coat), removing serviceable tiles to store and rubbish off the premesises.All as specified and as directed by Engineer-in-charge.

Dismantling water tanks and removing exc 500 but n exc 1000 ltrs capacity.All as specified and as directed by Engineer-in-charge.

Taking up or down 15mm bore steel water tubing & connections, including cleaning for refixing or removal to store.All as specified and as directed by Engineer-in-charge.

Taking up or down 20 mm bore steel water tubing & connections, including cleaning for refixing or removal to store.All as specified and as directed by Engineer-in-charge.

Dismantling of AC sheet corrugated / Semi corrugated sheets in wall cladding or in roof covering.All as specified and as directed by Engineer-in-charge.

M & L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with L type J type or cranked hook boltsAll as specified and as directed by Engineer-in-charge.

M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/eaves board, fixed wiith L type J type or cranked hook bolts.All as specified and as directed by Engineer-in-charge.

S & F 25 x 3mm F1 hold fast conforming to Fe 290, Gde -E-165

S & F Pressed steel frames of size 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed.All as specified and as directed by Engineer-in-charge.

S & F Pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed.All as specified and as directed by Engineer-in-charge.

M&L PCC 1:3:6 type C1 20mm grade aggregate as in filling of chowkhats hold fast or any other work or similar work complete all as specified and directed.

S & F 35 mm thick flush shutter , solid core construction ,with block board core and plywood face panel ,commercial type on both side.All as specified and as directed by Engineer-in-charge.

S/F 35 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc. Divided into squares with plain chamfered or rounded, rebated sash bars, sizes of the members of the shutters as specified and directed

S & F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S.tubes for top & bottom rails.M.S.frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S.frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supply & fixing in opening as per specification & drawing.

S&F mild steel medium weight cold rolled butt hinges 100 mm long and fixed.

S&F aluminium anodised, barrel tower bolt of extruded section 150mm long

S&F aluminium anodised, barrel tower bolt of extruded section 100 mm long

S&F 150mm long aluminium handle, cast type, anodised

S&F 125mm long aluminium handle, cast type, anodised

S&F Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm fitted with tinned tacles or galvanised wire staples complete all as specified and as directed.

Hacking out old broken glass (any hickness, size, quality or description) from Metal Frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones.All as specified and as directed by Engineer-in-charge.

S/F 3 mm thick ordinary quality sheet glass in squares n.exc 0.5 sqm in each pane glazing with oil putty All as specified and as directed by Engineer-in-charge.

S/F 3 mm thick figured glass in squares n.exc 0.5 sqm in each pane glazing with oil putty All as specified and as directed by Engineer-in-charge.

S & F GI water tubes medium grade with all necessary fitting all as reqd complete of 15mm dia and fixed in walls/floor etc.All as specified and as directed by Engineer-in-charge.

S&F tubes medium grade GI with all fittings fixed complete to walls and ceiling or laid in floors 20mm bore.All as specified and as directed by Engineer-in-charge.

S&F 500 Ltrs capacity rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position All as specified and as directed by Engineer-in-charge.

S&F 1000 Ltrs capacity rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified

S&F 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms)

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) fixed in repair of bore 25 mm

Supply and fix Plate rack made out of Stainless steel sheet 0.5 thick overall size 800(H)x800(W)x300(D) including brackets or fitted with existing shelves in repair complete all as specified and directed

M&L 15mm thick screed bed in CM 1:6 for laying of floor finish complete all as sfd and directed.

M&L 10mm thick backing coat in CM 1:4 on brick or concrete surfaces for fixing of wall tiles as in dado/skirting.

S&F Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

S&F for colour Glazed ceramic tiles (250x350)/(450x350) of 7 to 8mm thick, in dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match.All as specified and as directed by Engineer-in-charge.

S&F in repairs Vitreous China wash hand basin white 550 x 400 mm including CP waste coupling and PVC Waste pipe fixed All as specified and as directed by Engineer-in-charge.

S&F Vitreous China EWC wash down water closet (padestal pattern, white ) including PVC Sheet cover fixed in repair.All as specified and as directed by Engineer-in-charge.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including lime concrete bedding 1:2.All as specified and as directed by Engineer-in-charge.

S & F in repair PVC Low level flushing cistren 10 Ltr capacety including all fitting such as flush pipe brackets(Complete).

S &F in repair brass CP shower rose swivel type fix to iron pipe all as directed.

S & F in repair 15mm Stop valves cast copper alloy with fancy type chromium plated with long shank and cup (Concealed Type) for iron pipe or for unions and fixed .

S & F in repair 15mm Angle Stop valves cast copper alloy,fancy type with chromium plated for iron pipe or for unions and fixed .

Disconnecting existing tanks exc 500 L upto and incl n.exc 1000 L, setting aside (or lowering if required) for water tanks, dewatering,cleaning and sterilisation with wire /brush/fine steel wire brush, clothes, removing all dirt and scale and algae formation inside the tank by using TERBAC G5(a lab tested chemical) including writing with yellow paint over base of the tank wall as "TANK CLEANED ON' with date, month and year with a minimum of 10 cm height capital letters/numbers. The cleaning process would follow fwg stages as under: (a) To drain out the water by using exit valve or high capacity dewatering system (b) Cleaning all the algae formation inside the tank by using TERBAC G5 chemical. (c) Scrubbing the walls with mechanised scrubber & fresh water cleaning by high speed jet pump. (d) 1st stage of bacteria screening by degermification by using TERBAC G5 halogen compound. (e) Cleaning the floor of the water tank by industrial vacuum cleaner. (f) 2nd stage of bacteria screening & sterilizing method by using UV ray within the tank & killing all suspended bacteria. (g) 3rd stage of bacteria screening by sterilizing the floor of water tank by using strong oxidizing agent TERBAC-G65.

Dismantling and breakingup drain pipes AC /CI /PVC set in cement mortar 100mm/75mm bore.

S&F PVC (SWR) pipes single socketed in any length with rubberring joints fixed to walls or floor 110mm bore.(Make Prince/Supreme/Kisan)

S&F PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to fioors ,75 mm bore .complete all as specified and directed. (Make : PRINCE/SUPREME/KISAN ).

S&F PVC (SWR) bends any radius 110mm bore in repairs

S& F PVC(SWR) junction single (single 'T') equal or unequal 110mm bore.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete fixed in repair

S&F pillar cock 15mm dia CP fancy type fixed in repair

M & L 10mm thick rendering in cm(1:6) on fair faces of brick work or concrete surfaces and finished the surface even & smooth without using extra cement.

M & L 15mm thick rendering in cm(1:4) on fair faces of brick work or concrete surfaces and finished the surface even & smooth with WPC @ 2% by the weight of cement. (WPC Will be measured and paid seperately).

Supply only integral water proofing compound (make: Dr Fixit/Pedilite/fosroc)

M&L 5mm thick ceiling plaster in CM (1:3) finished even and smooth without using extra cement.All as specified and as directed by Engineer-in-charge.

M/L two coats of synthetic enameled painting over a coat of pink primer to new wooden surfaces of any description exc 10 cm width or girth.All as specified and as directed by Engineer-in-charge.

M&L preparing new steel surfaces and applying two coat of syntheitc enameled paint over a red oxide primer exc 10 cm width or grith.

M&L two coats of cement base paint over a coat of primer including preparation of new surfaces.All as specified and as directed by Engineer-in-charge.

M&L Applying two coats of distemper over a coat of 3 mm thick a layer of wall care putty on walls including preparation of surface.All as specified and as directed by Engineer-in-charge.

M&L for preparing new plastered surface of wall and applying three coats of white wash incl cornicecomplete all as specified and directed. preparation of new surfaces.

M&L for preparing new plastered surface of ceiling and applying three coats of white wash all as specified and directed. preparation of new surfaces.

M/L 75mm thick P.C.C 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection/sub base/path etc complete all as specified and directed.

S&F in repairs 15mm bore fancy type chromium plated bib cock long body with crutch or butterfly handle screwed down for iron pipes.

S&F in repairs 15mm bore fancy type PTMT bib cock long body with crutch or butterfly handle screwed down for iron pipes.

S & F in repair health faucet with 1.00 mtr tube and hook complete all as specified and directed. Make-Prayag Cat no BEA -81

M & L for Door closer hydraulically regulated, designation No. 2, universal type, suitablefor door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed in repairs

S & F in repairs Waste coupling of brass chromium plated (half or full threaded) .(Jaquar/ Hindware)

S & F in repairs 32mm bore PVC Waste pipe for wash hand basin complete all as directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

S & F in repair tank cover for PVC tank(500/750/1000Ltrs) cover with 6 mm dia MS bar hinging device and 6mm dia MS bar locking arrangement of 'S; type for monkey protection etc complete all as specified and directed

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches,ceiling roses,pendants,regulators,sockets,light fitting etc. and making good disturbed surfaces of walls, floors etc all as specified and directed.

Material and labour for point wiring for one light/call bell/fan point with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FR cable controlled by one way switch, drawn with PVC casing/caping with all accessories incl 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity connected to common earth dolly and sunk cast pressed steel terminal box fixed flush to wall of not less than 1.6 mm thick for mounting of fittings such as switch, socket and speed regulator with 3 mm thick Laminated bakelite sheet cover all as specified and directed. (a) one light/fan/bell point controlled by one, one way switch.

(b) one socket outlet 5 pin 6 amps on independent board.

(c) one 5 amps socket outlet on same board with other switch.

Material and labour for point wiring 2.5 sqmm including 1.5 sq mm PVC insulated, unsheathed multistranded copper conductor cable 1100 volts grade, single core, earth continuity conductor connected to common earth dolly for one 3/5 pin 15 Amps socket out let on independent board.

Supply and fix Modular switch one way 6 Amp.

Supply and fix Modular switch one way 16 Amp.

Supply and fix modular switch 2 way 6 Amp.

Supply and fix modular bell push 6 Amp.

Supply and fix call bell, AC 230 volts, single pole.

Supply and fix modular socket outlet 2 in 1, 3 pin 6 A.

Supply and fix Modular socket outlet 16 Amps

Supply and fix angular lamp holder, PVC/Polycarbonate type all as specified and directed.

Material and labour for ceiling rose polycarbonate isolated body 3 ways terminals.

Supply and fix modular type electronic fan regulator.

Supply and fixing modular white cover plate with frame 1 modules complete all as specified and as directed. Make: Havells/Anchor

Supply and fixing modular white cover plate with frame 2 modules complete all as specified and as directed. Make: Havells/Anchor

Supply and fixing modular white cover plate with frame 3 modules complete all as specified and as directed. Make: Havells/Anchor

Supply and fixing modular white cover plate with frame 4 modules complete all as specified and as directed. Make: Havells/Anchor

Supply and fixing modular white cover plate with frame 6 modules complete all as specified and as directed. Make: Havells/Anchor

Supply and fixing modular white cover plate with frame 8 modules complete all as specified and as directed. Make: Havells/Anchor

Supply and fixing modular white cover plate with frame 12 modules complete all as specified and as directed. Make: Havells/Anchor

Supply and fix, as in repair switch bell push flush type 5 Amp 230 Volts complete all as specified and directed.

Supply and fix, as in repair fan regulator switch flush type 5 Amp 230 Volts complete all as specified and directed.

Supply and fix, as in repair switch piano, flush button, single pole, one way,240 Volts 5 Amps, complete all as specified.

Supply and fix, as in repair socket, flush button 240 Volts 5 Amps, complete all as specified.

Supply and fix, switch socket combination 3 pin, 5 Amps flush type 240 Volts all as specified and directed.

Supply and fix, switch socket combination 2 in 1, 3 pin 5 and 15 Amps, flush type universal, 240 Volts complete all as specified and directed.

Supply and fix in replacement of PVC Square box for mounting angular holder complete all as specified and directed.

Supply and fix in replacement of Surface mounting plastic box 4X4 inch size including all fixing accessories complete all as specified and directed.

Supply and fix in replacement of Surface mounting plastic box 4X7 inch size including all fixing accories complete all as specified and directed.

Supply and fix in replacement of Surface mounting plastic box 8X6 inch size including all fixing accories complete all as specified and directed.

Taking down and Refixing at site ceiling fans 1200/1400 mm sweep including opening of fans and cutting down burnt winding, and rewinding with new super enameled copper winding of same gauge as per existing winding, varnishing, drying, replacement of ball bearing, replacement of condenser etc and re-assembling the same including necessary transportation etc complete including taking down all as specified and directed.

S&F in repair of capacitor of capacity 3.15 MFD complete all as specified and directed.

Supply and fixing LED fitting 20 watts 6000k very high efficiency enviormental friendly long life mounting on PVC round/square PVC block and making all connection using three core PVC insulated copper conductor muilti strandard flexible cable drawn through in PVC flexible conduit pipe from fitting to ceiling rose complete all as specified and directed.

Supply and fixing LED fitting 10 watts 6000k very high efficiency enviormental friendly long life mounting on PVC round/square PVC block and making all connection using three core PVC insulated copper conductor muilti strandard flexible cable drawn through in PVC flexible conduit pipe from fitting to ceiling rose complete all as specified and directed.

Supply & fix in replacement of LED bulb 10 watt complete all as specified and as directed. Make Crampton Greaves/Surya/Bajaj/Havells

S&F in replacement of decorative Trim Clipon LED Panel light not less than 12 Watt, 6500 K unique slimmest recess com surface panel, soul made up of high grade unbreakable polycorbonate material all as specified and directed. Make Havells Model No. LHEAABP7IL1W012

Supply and fix in repair plastic body exhaust fan 250 mm sweep, AC single phase, including making hole of suitable size, electrical connection with twisted three core PVC insulated copper conductor from ceiling rose complete all as specified and as directed. Make: Model- crisp air exh fan of Usha

Supply and fix in repair metal body light duty exhaust fan 300 mm sweep and metal blades with double ball bearing metal protective bird guard, AC single phase, including making hole of suitable size, electrical connection with twisted three core PVC insulated copper conductor from ceiling rose complete all as specified and as directed. Make: Model- Aeroclean Plus DBB GBD of Usha

Supply and fix in repair metal body heavy duty exhaust fan 300 mm sweep 900 RPM and metal blades with double ball bearing metal protective bird guard, AC single phase, including making hole of suitable size, electrical connection with twisted three core PVC insulated copper conductor from ceiling rose complete all as specified and as directed. Make: Model- Turbo HDEF 900 RPM ISI of Usha or equivalent make of Havells/Crampton/Bajaj

Supply and fix in repair metal body heavy duty Exhaust fan 450 mm sweep 1400 RPM and metal blades with double ball bearing metal protective bird guard , AC single phase, including making hole of suitable size, electrical connection with twisted three core PVC insulated copper conductor from ceiling rose complete all as specified and as directed. Make: Model- Heavy duty Turbo HDEF 1400 RPM of Usha

S&F in replacement of Ultra modern designed architectural LED luminaire 42 Watt, Fixture size in mm (LxWxH) 595x595x65 for 2x2 Ordering : Module + Driver (driver to be ordered separately).which provides soft-light and glare free symmetrical illumination suitable for Armstrong/Grid ceiling high grade unbreakable polycorbonate material all as specified and directed. Make Havells Model No. VENUSNEOHE2X2PLR18-42WLED830MOD

S & F in replacement of MCB TPN 415 Volts, 63 Amps, 50 Hz, breaking capacity 10KA, C series all as specified and directed

S & F in replcement of MCB SPN 240 Volts, 50-63 Amps, 50 Hz, breaking capacity 10KA, C series all as specified and directed

S & F in replcement of MCB SPN 240 Volts, 6-32 Amps, 50 Hz, breaking capacity 10KA, C series all as specified and directed

S & F in replacement of MCB SP 6-32 Amps, 240 V, 50 HZ,breaking capacity 10KA, C series all as specified and directed.

Supply and fix in replacement of SPN double door MCB distribution board sheet steel, powder coated 12 way fitted with bus bar Neutral link, earth bar and din rail complete all as directed.

Supply and fix in replacement of SPN double door MCB distribution board sheet steel, powder coated 8 way fitted with bus bar Neutral link, earth bar and din rail complete all as directed.

Supply and fix in replacement of SPN double door MCB distribution board sheet steel, powder coated 4 way fitted with bus bar Neutral link, earth bar and din rail complete all as directed.

Supply and fixing LED street lights not less than 25 W with a single piece of pressure die cast aluminium housing and secondary optics and individual LEDs for a better light distribution and control with IP66 degree of protection and integrated driver with 10KV surge protection including GI bracket of dia 32 mm complete as all as directed.

Supply and fixng in replacement of TPN DB 4 way double door when MCB TPN is to be used for 415 volts multiple outgoing distribution board sheet metal powder coated fitted with bus bar neutral link earth bar and din rail.

Supply and fixng in replacement of AC single phase electronic Kwh energy meter of rating 10-60A, class 1.0, 1 x 240V, 50Hz, counter type display with transparent hinge type box. Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose.

KAMAKHYA CONSTRUCTION & BUILDERS

Ms N D Enterpise

M/S Sharma Construction