375/G/Sarangarh/2nd call/dated 28.10.2026

DETAILED ESTIMATE FOR CONSTRUCTION OF ROAD WIDENING & C.C. ROAD FROM ASHOK ALU HOUSE TO Dr. SINGH HOUSE AT KHARSIA 1

SN P/I ITEM N L B H QTY RATE AMOUNT

1 15/3.1 Excavation for roadway in soil using including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto1000 meters as per relevant clauses of section 300.

2 18/4.1.B Construction of granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401

By Mix in place method

Construction of granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401

3 27/6.6 Providing and laying cement concrete for plain concrete/ reinforced concrete i/c form work, shuttering complete in as per drawings and specifications.( For Village roads and ODR )

SAY Rs 0.37 #REF!

DETAILED ESTIMATE FOR CONSTRUCTION OF ROAD WIDENING & C.C. ROAD FROM VINOD SHARMA HOUSE TO GARDEN CHOWK AT KHARSIA 2

SN P/I ITEM N L B H QTY RATE AMOUNT

1 15/3.1 Excavation for roadway in soil using including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto1000 meters as per relevant clauses of section 300.

2 18/4.1.B Construction of granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401

By Mix in place method

Construction of granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401

3 27/6.6 Providing and laying cement concrete for plain concrete/ reinforced concrete i/c form work, shuttering complete in as per drawings and specifications.( For Village roads and ODR )

SAY Rs 0.37 #REF!

DETAILED ESTIMATE FOR CONSTRUCTION OF ROAD WIDENING & C.C. ROAD FROM VINOD SHARMA HOUSE TO BEHIND KAMLA NEHRU SCHOOL AT KHARSIA 3

SN P/I ITEM N L B H QTY RATE AMOUNT

1 15/3.1 Excavation for roadway in soil using including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto1000 meters as per relevant clauses of section 300.

2 18/4.1.B Construction of granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401

By Mix in place method

Construction of granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401

3 27/6.6 Providing and laying cement concrete for plain concrete/ reinforced concrete i/c form work, shuttering complete in as per drawings and specifications.( For Village roads and ODR )

SAY Rs 0.47 #REF!

DETAILED ESTIMATE FOR CONSTRUCTION OF ROAD WIDENING & C.C. ROAD FROM ASHOK ALU HOUSE TO BEHIND KAMLA NEHRU SCHOOL AT KHARSIA 4

SN P/I ITEM N L B H QTY RATE AMOUNT

1 15/3.1 Excavation for roadway in soil using including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto1000 meters as per relevant clauses of section 300.

2 18/4.1.B Construction of granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401

By Mix in place method

Construction of granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401

3 27/6.6 Providing and laying cement concrete for plain concrete/ reinforced concrete i/c form work, shuttering complete in as per drawings and specifications.( For Village roads and ODR )

SAY Rs 0.47 #REF!

DETAILED ESTIMATE FOR CONSTRUCTION OF ROAD WIDENING & C.C. ROAD AT LEFT SIDE OF DINDAYAL GARDEN AT KHARSIA 5

SN P/I ITEM N L B H QTY RATE AMOUNT

1 15/3.1 Excavation for roadway in soil using including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto1000 meters as per relevant clauses of section 300.

2 18/4.1.B Construction of granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401

By Mix in place method

Construction of granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401

3 27/6.6 Providing and laying cement concrete for plain concrete/ reinforced concrete i/c form work, shuttering complete in as per drawings and specifications.( For Village roads and ODR )

SAY Rs 1.29 #REF!

DETAILED ESTIMATE FOR CONSTRUCTION OF ROAD WIDENING & C.C. ROAD AT RIGHT SIDE OF DINDAYAL GARDEN AT KHARSIA 6

SN P/I ITEM N L B H QTY RATE AMOUNT

1 15/3.1 Excavation for roadway in soil using including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto1000 meters as per relevant clauses of section 300.

2 18/4.1.B Construction of granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401

By Mix in place method

Construction of granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401

3 27/6.6 Providing and laying cement concrete for plain concrete/ reinforced concrete i/c form work, shuttering complete in as per drawings and specifications.( For Village roads and ODR )

SAY Rs 1.29 #REF!

DETAILED ESTIMATE FOR CONSTRUCTION OF ROAD WIDENING & C.C. ROAD FROM DR. SINGH TO TOWARDS GIRDHAR GUPTA GALI'S ROAD AT KHARSIA 7

SN P/I ITEM N L B H QTY RATE AMOUNT

1 15/3.1 Excavation for roadway in soil using including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto1000 meters as per relevant clauses of section 300.

2 18/4.1.B Construction of granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401

By Mix in place method

Construction of granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401

3 27/6.6 Providing and laying cement concrete for plain concrete/ reinforced concrete i/c form work, shuttering complete in as per drawings and specifications.( For Village roads and ODR )

SAY Rs 0.50 #REF!

DETAILED ESTIMATE FOR CONSTRUCTION OF ROAD WIDENING & C.C. ROAD FROM MOTAR STAND TO GIRDHAR GUPTA GALI'S ROAD AT KHARSIA 8

SN P/I ITEM N L B H QTY RATE AMOUNT

1 15/3.1 Excavation for roadway in soil using including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto1000 meters as per relevant clauses of section 300.

2 18/4.1.B Construction of granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401

By Mix in place method

Construction of granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401

3 27/6.6 Providing and laying cement concrete for plain concrete/ reinforced concrete i/c form work, shuttering complete in as per drawings and specifications.( For Village roads and ODR )

SAY Rs 0.87 #REF!

DETAILED ESTIMATE FOR CONSTRUCTION OF ROAD WIDENING & C.C. ROAD FROM SUBHASH HOUSE TO KAMLA NEHRU SCHOOL AT KHARSIA 9

SN P/I ITEM N L B H QTY RATE AMOUNT

1 15/3.1 Excavation for roadway in soil using including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto1000 meters as per relevant clauses of section 300.

2 18/4.1.B Construction of granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401

By Mix in place method

Construction of granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401

3 27/6.6 Providing and laying cement concrete for plain concrete/ reinforced concrete i/c form work, shuttering complete in as per drawings and specifications.( For Village roads and ODR )

SAY Rs 1.08 #REF!

DETAILED ESTIMATE FOR CONSTRUCTION OF C.C. ROAD FROM HALDAR HOUSE TO SONI HOUSE AT KHARSIA 10

SN P/I ITEM N L B H QTY RATE AMOUNT

1 15/3.1 Excavation for roadway in soil using including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto1000 meters as per relevant clauses of section 300.

2 18/4.1.B Construction of granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401

By Mix in place method

Construction of granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401

3 27/6.6 Providing and laying cement concrete for plain concrete/ reinforced concrete i/c form work, shuttering complete in as per drawings and specifications.( For Village roads and ODR )

SAY Rs 0.57 #REF!

PUBLIC WORKS DEPARTMENT

NAME OF THE WORK

Abstract Estimate for S/R, MOW for Residential and non residential building under sub div-Sarangarh div- Sarangarh (CG)

ESTIMATED COST:- Rs. 39.90 Lakh

OFFICE OF EXECUTIVE ENGINEER, PUBLIC WORKS DEPARTMENT ( B&R) SARANGARH DIVISION, SARANGARH

REPORT AND SPECIFICATION

Name of Work : Abstract Estimate for S/R, MOW for Residential and non residential building under sub div-Sarangarh div- Sarangarh (CG)

Estimated cost : RS. 39.90 LAKHS

Authority : Executive Engineer P.W.D.(B/R) Division Sarangarh

Necessity : For the Annual maintenance, Special Repair, and MOW works For Various R & NR Building of Health, School, Higher Education & Other Deptt. Under H.Q. Section, Sub div-Sarangarh, Division-Sarangarh (C.G.) this estimate has been prepared

Provision : Work shall be executed as required for repair, maintenance and minor original work as per attached estimate.

Rates : The Rates are provided as per Building S.O.R. issued by E-In-C C.G.P.W.D. Raipur w.e.f. 01-01-2015 amended upto date

Specification : All work shall be carried out as per CPWD specifications.

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. SARANGARH P.W.D. SUB DIVISION SARANGARH P.W.D. DIVISION SARANGARH

DETAILED ESTIMATE OF WBM PATCH REPAIR OF DIFFERENT ROADS OF KHARSIA SUB DIVISION DETAILED ESTIMATE OF WBM PATCH REPAIR OF DIFFERENT ROADS OF KHARSIA SUB DIVISION

SN P/I ITEM N L B H QTY RATE AMOUNT

1 P-19/4.8 Water Bound Macadam (Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.)

A Grading- II (Using Screening Crushable type such as Moorum or Gravel)

(i) Using Screening Crushable type such as Moorum or Gravel

Edu-Barbhona-Singhanpur Road (22.40 km) 1 22400.0 3.0 0.075 5040.0

Jobi-Bargarh Road(13.30 km) 1 9100.0 3.0 0.075 2047.5

Chhal-Gharghoda Road(26.4 km) 1 12000.0 7.0 0.075 6300.0

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

DETAILED ESTIMATE FOR B.T. PATCH OF BY-PASS NO-1 ROAD AT KHARSIA SUB DIVISION DETAILED ESTIMATE FOR B.T. PATCH OF BY-PASS NO-1 ROAD AT KHARSIA SUB DIVISION

SN P/I ITEM N L B H QTY RATE AMOUNT

1 P-18/4.1 A Construction of granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401 with mechanically crushed stone only

Plant mix method

(i) for grading-III Material

2 P-19/4.11 (B) (i) Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.)

3 21/5.1 Prime coat (Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clrearing of road surface and spraying primer at the rate of 0.850 kg/sqm using mechanical means)

4 21/5.2 (ii) Tack coat Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor on the prepared bituminous/ granular surface cleaned with mechanical broom and as per clause 503 of section 500.

(ii) Dry and hungry bituminous surface/granular surfaces treated wiyh primes @ 0.30 kg/sqm

5 24/5.13 (i) Bituminous Macadam (Providing and laying bituminous macadam with 60-90 TPH hot mix plant using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction)

With mechanical paver finisher

for Grading II (19 mm nominal size, bitumen content 3.40%)

6 24/5.14 A Close Graded Premix Surfacing / Mixed Seal Surfacing (Mechanical means using HMP of appropriate capacity not less than 60 tonnes/hour. Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness using penetration grade bitumen to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade. )

With 60/70 grade bitumen

Type B ( 13.2 mm to 0.09 mm size aggregates )

7 P-41/10.4 Filling Pot- holes and Patch Repairs with open - graded Premix surfacing, 20mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2)

for grading-III Material

8 20/ 4.14 Construction of shoulders (Construction of shoulders as per clause 407 with selected soil from borrow pits / borrow areas having CBR not less than 12and shall have L.L. and P.I. Not more than 25% and 6% respectively, inclusive of all leads and lifts, including clearing and scrapping of existing surface, providing 4% camber, watering rolling and royalty charges etc. complete. Y Y

B With Smooth wheeled roller

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

DETAILED ESTIMATE FOR B.T. PATCH OF BY-PASS NO 1 & 2 ROAD AT KHARSIA SUB DIVISION DETAILED ESTIMATE FOR B.T. PATCH OF BY-PASS NO 1 & 2 ROAD AT KHARSIA SUB DIVISION

SN P/I ITEM N L B H QTY RATE AMOUNT

1 P-19/4.8 (B) (i) Water Bound Macadam (Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.)

Grading- III (Using Screening Crushable type such as Moorum or Gravel)

Using Screening Crushable type such as Moorum or Gravel

2 21/5.1 Prime coat (Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clrearing of road surface and spraying primer at the rate of 0.850 kg/sqm using mechanical means)

3 P-41/10.4 Filling Pot- holes and Patch Repairs with open - graded Premix surfacing, 20mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2)

for grading-III Material

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

SN P/I ITEM N L B H QTY RATE AMOUNT #REF!

1 P-41/10.4 Filling Pot- holes and Patch Repairs with open - graded Premix surfacing, 20mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2)

for grading-III Material

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

4 41/10.2 Maintenance of Earthen Shoulder (filling with fresh soil) (Making up loss of material/ irregularities on shoulder to the design level by adding fresh approved soil and compacting it with appropriate equipment.)

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

DETAILED ETIMATE FOR WMM PATCH AND B.T. PATCH OF DOMNARA-BARRA-JOBI-KAFARMAR ROAD

SN P/I ITEM N L B H QTY RATE AMOUNT DETAILED ETIMATE FOR WMM PATCH AND B.T. PATCH OF DOMNARA-BARRA-JOBI-KAFARMAR ROAD

2 P-19/4.11 (B) (i) Water Bound Macadam (Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.)

Grading- II (Using Screening Crushable type such as Moorum or Gravel)

Using Screening Crushable type such as Moorum or Gravel

3 21/5.1 Prime coat (Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clrearing of road surface and spraying primer at the rate of 0.850 kg/sqm using mechanical means)

1 P-41/10.4 Filling Pot- holes and Patch Repairs with open - graded Premix surfacing, 20mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2)

for grading-III Material

7 41/10.2 Maintenance of Earthen Shoulder (filling with fresh soil) (Making up loss of material/ irregularities on shoulder to the design level by adding fresh approved soil and compacting it with appropriate equipment.)

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

DETAILED ETIMATE FOR CONSTRUCTION OF B.T. ROAD AT KHARSIA BY-PASS NO 2 , KM 3/2(30M) TO 3/4(150M)= ( 180 m)

SN P/I ITEM N L B H QTY RATE AMOUNT DETAILED ETIMATE FOR CONSTRUCTION OF B.T. ROAD AT KHARSIA BY-PASS NO 2 , KM 3/2(30M) TO 3/4(150M)= ( 180 m)

2 P-19/4.11 (B) (i) Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.)

km 1 to 3/4=2.2 km

3 21/5.1 Prime coat (Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clrearing of road surface and spraying primer at the rate of 0.850 kg/sqm using mechanical means)

4 21/5.2 (ii) Tack coat Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor on the prepared bituminous/ granular surface cleaned with mechanical broom and as per clause 503 of section 500.

(ii) Dry and hungry bituminous surface/granular surfaces treated with primes @ 0.30 kg/sqm

1 P-41/10.4 Filling Pot- holes and Patch Repairs with open - graded Premix surfacing, 20mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2)

for grading-III Material

7 41/10.2 Maintenance of Earthen Shoulder (filling with fresh soil) (Making up loss of material/ irregularities on shoulder to the design level by adding fresh approved soil and compacting it with appropriate equipment.)

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

N.I.T. SCHEDULE OF B.T. PATCH REPAIR OF VARIOUS ROADS OF KHARSIA SUB DIVISION 1 N.I.T. SCHEDULE OF B.T. PATCH REPAIR OF VARIOUS ROADS OF KHARSIA SUB DIVISION

P.A.C.AMOUNT 25.0 lakhs

SN PAGE CHAPTER ITEM N0 SUB ITEM ITEM QTY UNIT RATE AMOUNT

1 43 10 10.3 - Filling Pot-holes and Patch Repairs with Close Graded Premix Surfacing / Mixed Seal Surfacing, 20mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot-holes with hot bituminous material as per clause 512, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2 i/c tack coat.) 15920.00 SQM 157.0 2499440.0

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

DETAILED ESTIMATE OF B.T. PATCH REPAIR OF VARIOUS VILLAGE ROADS OF KHARSIA SUB DIVISION (PART-1) 1 DETAILED ESTIMATE OF B.T. PATCH REPAIR OF VARIOUS VILLAGE ROADS OF KHARSIA SUB DIVISION (PART-1)

SN P/I ITEM N L B H QTY RATE AMOUNT

1 P-43/I-10.2 Filling Pot-holes and Patch Repairs with Open-Graded Premix Surfacing, 20mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2 i/c tack coat.)

Khamhar to Beharchuan Road 10% 12000.0 3.0 3600.0

Gadapali to Sajapali Road 10% 3000.0 3.0 900.0

Farkanara-Puchhiapali-Tandapara to Khamhar Road 18.1% 6100.0 3.0 3312.3

2 P-43/I-10.3 Filling Pot-holes and Patch Repairs with Open-Graded Premix Surfacing, 20mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2 i/c tack coat.)

Khamhar to Beharchuan Road 10% 12000.0 3.0 3600.0

Gadapali to Sajapali Road 10% 3000.0 3.0 900.0

Farkanara-Puchhiapali-Tandapara to Khamhar Road 18.1% 6100.0 3.0 3312.3

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

DETAILED ESTIMATE OF B.T. PATCH REPAIR OF VARIOUS VILLAGE ROADS OF KHARSIA SUB DIVISION (PART-1) 1 DETAILED ESTIMATE OF B.T. PATCH REPAIR OF VARIOUS VILLAGE ROADS OF KHARSIA SUB DIVISION (PART-1)

SN P/I ITEM N L B H QTY RATE AMOUNT

1 P-43/I-10.2 Filling Pot-holes and Patch Repairs with Open-Graded Premix Surfacing, 20mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2 i/c tack coat.)

Khamhar to Beharchuan Road 10% 12000.0 3.0 3600.0

Gadapali to Sajapali Road 10% 3000.0 3.0 900.0

Farkanara-Puchhiapali-Tandapara to Khamhar Road 18.1% 6100.0 3.0 3312.3

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

DETAILED ESTIMATE OF B.T. PATCH REPAIR OF VARIOUS VILLAGE ROADS OF KHARSIA SUB DIVISION (PART-II) 2 DETAILED ESTIMATE OF B.T. PATCH REPAIR OF VARIOUS VILLAGE ROADS OF KHARSIA SUB DIVISION (PART-II)

SN P/I ITEM N L B H QTY RATE AMOUNT

1 P-41/10.5 Filling Pot- holes and Patch Repairs with - Bituminous concrete, 40mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2)

for grading II Material

Bargarh-Sarwani Road 15% 4600.0 3.0 2070.0

Bargarh-Dhimani Road 12% 4800.0 3.0 1728.0

Kharsia-Tiyur Road 15% 7000.0 3.0 3150.0

Halahuli-Turekela Road 10.3% 2800.0 3.0 865.2

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

DETAILED ESTIMATE OF B.T. PATCH REPAIR OF VARIOUS VILLAGE ROADS OF KHARSIA SUB DIVISION (PART-III) 3 DETAILED ESTIMATE OF B.T. PATCH REPAIR OF VARIOUS VILLAGE ROADS OF KHARSIA SUB DIVISION (PART-III)

SN P/I ITEM N L B H QTY RATE AMOUNT

1 P-41/10.5 Filling Pot- holes and Patch Repairs with - Bituminous concrete, 40mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2)

for grading II Material

Chaple-Basnajhar Road 10% 14000.0 3.0 4200.0

Basnajhar Saraipaipali to Ranisagar Road 12% 7200.0 3.0 2592.0

Rajghatta Approach Road 12.14% 2800.0 3.0 1019.8

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

DETAILED ESTIMATE OF B.T. PATCH REPAIR OF CHHAL CHADGHODA ROAD OF KHARSIA SUB DIVISION 4 DETAILED ESTIMATE OF B.T. PATCH REPAIR OF CHHAL CHADGHODA ROAD OF KHARSIA SUB DIVISION

SN P/I ITEM N L B H QTY RATE AMOUNT

1 P-41/10.5 Filling Pot- holes and Patch Repairs with - Bituminous concrete, 40mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2)

for grading II Material

CHHAL GHADGHODA ROAD

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

Kurru Kafarmar Road 15% 3100.0 3.0 1395.0

Barra to Khamhar Road 10% 3800.0 3.0 1140.0

Gadapali to Sajapali Road 10% 3000.0 3.0 900.0

2 Gidha approach Road 10% 3600.0 3.0 1080.0

3 Halahuli-Turekela Road 10% 3000.0 3.0 900.0

4 Telikot-Thusekela to Rajivnagar Road 10% 4100.0 3.0 1230.0

6 Chaple-Basnajhar Road 5% 14000.0 3.0 2100.0

DETAILED ESTIMATE OF B.T. PATCH REPAIR OF DIFFERENT ROADS OF KHARSIA SUB DIVISION DETAILED ESTIMATE OF B.T. PATCH REPAIR OF DIFFERENT ROADS OF KHARSIA SUB DIVISION

SN P/I ITEM N L B H QTY RATE AMOUNT

1 P-41/10.4 Filling Pot- holes and Patch Repairs with open - graded Premix surfacing, 20mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2)

Edu-Barbhona-Singhanpur Road (22.40 km) 1 22400.0 3.0 67200.0

Jobi-Bargarh Road(13.30 km) 1 9000.0 3.0 27000.0

Chhal-Gharghoda Road(26.4 km) 1 12000.0 7.0 84000.0

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

DETAILED ESTIMATE OF B.T. PATCH REPAIR OF VARIOUS ROADS OF KHARSIA SUB DIVISION DETAILED ESTIMATE OF B.T. PATCH REPAIR OF VARIOUS ROADS OF KHARSIA SUB DIVISION

SN P/I ITEM N L B H QTY RATE AMOUNT

1 P-41/10.4 Filling Pot- holes and Patch Repairs with open - graded Premix surfacing, 20mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2)

Domnara-Barra-Jobi-Kafarmar Road(19.5 km) 60% 5000.0 3.0 9000.0

Chhal-Gharghoda Road(26.4 km)

KHAMHAR-KHADGAON-KATAUD-MINGI TO RAMPUR ROAD(15.00KM)

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

DETAILED ESTIMATE OF B.T. PATCH REPAIR OF DIFFERENT ROADS OF KHARSIA SUB DIVISION UNDER PG DETAILED ESTIMATE OF B.T. PATCH REPAIR OF DIFFERENT ROADS OF KHARSIA SUB DIVISION UNDER PG

SN P/I ITEM N L B H QTY RATE AMOUNT

1 P-41/10.4 Filling Pot- holes and Patch Repairs with open - graded Premix surfacing, 20mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2)

Kharsia-Dabhra-Chandrapur Road (2.40 km) 11% 2400.0 4.95 1306.8

Hati-Kharsia Road (17.00 km) 25% 3200.0 7.0 5600.0

Domnara-Barra-Jobi-Kafarmar Road(19.5 km) 10% 4000.0 7.0 2800.0

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

DETAILED ESTIMATE OF B.T. PATCH REPAIR OF DOMNARA-BARRA-JOBI KAFARMAR,CHAL GHDGHODA ROAD AND KHAMHAR-KHADGAON-KATAUD-MINGI TO RAMPUR ROAD OF KHARSIA SUB DIVISION DETAILED ESTIMATE OF B.T. PATCH REPAIR OF DOMNARA-BARRA-JOBI KAFARMAR,CHAL GHDGHODA ROAD AND KHAMHAR-KHADGAON-KATAUD-MINGI TO RAMPUR ROAD OF KHARSIA SUB DIVISION

SN P/I ITEM N L B H QTY RATE AMOUNT

1 P-41/10.4 Filling Pot- holes and Patch Repairs with open - graded Premix surfacing, 20mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2)

Domnara Barra Jobi Kafarmar Road(19.50 km)

Chhal-Gharghoda Road(26.4 km)

Khamhar-Khadgaon-Kataud-Mingi to Rampur Road(15.0 km)

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

DETAILED ESTIMATE FOR B.T. PATCH OF BY-PASS NO-1 ROAD AT KHARSIA SUB DIVISION DETAILED ESTIMATE FOR B.T. PATCH OF BY-PASS NO-1 ROAD AT KHARSIA SUB DIVISION

SN P/I ITEM N L B H QTY RATE AMOUNT

1 P-18/4.1 A Construction of granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401 with mechanically crushed stone only

Plant mix method

(i) for grading-III Material

2 P-19/4.11 (B) (i) Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.)

3 21/5.1 Prime coat (Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clrearing of road surface and spraying primer at the rate of 0.850 kg/sqm using mechanical means)

4 21/5.2 (ii) Tack coat Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor on the prepared bituminous/ granular surface cleaned with mechanical broom and as per clause 503 of section 500.

(ii) Dry and hungry bituminous surface/granular surfaces treated wiyh primes @ 0.30 kg/sqm

5 24/5.13 (i) Bituminous Macadam (Providing and laying bituminous macadam with 60-90 TPH hot mix plant using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction)

With mechanical paver finisher

for Grading II (19 mm nominal size, bitumen content 3.40%)

6 24/5.14 A Close Graded Premix Surfacing / Mixed Seal Surfacing (Mechanical means using HMP of appropriate capacity not less than 60 tonnes/hour. Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness using penetration grade bitumen to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade. )

With 60/70 grade bitumen

Type B ( 13.2 mm to 0.09 mm size aggregates )

7 P-41/10.4 Filling Pot- holes and Patch Repairs with open - graded Premix surfacing, 20mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2)

for grading-III Material

8 20/ 4.14 Construction of shoulders (Construction of shoulders as per clause 407 with selected soil from borrow pits / borrow areas having CBR not less than 12and shall have L.L. and P.I. Not more than 25% and 6% respectively, inclusive of all leads and lifts, including clearing and scrapping of existing surface, providing 4% camber, watering rolling and royalty charges etc. complete. Y Y

B With Smooth wheeled roller

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

DETAILED ESTIMATE FOR B.T. PATCH OF BY-PASS NO 1 & 2 ROAD AT KHARSIA SUB DIVISION DETAILED ESTIMATE FOR B.T. PATCH OF BY-PASS NO 1 & 2 ROAD AT KHARSIA SUB DIVISION

SN P/I ITEM N L B H QTY RATE AMOUNT

1 P-19/4.8 (B) (i) Water Bound Macadam (Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.)

Grading- III (Using Screening Crushable type such as Moorum or Gravel)

Using Screening Crushable type such as Moorum or Gravel

2 21/5.1 Prime coat (Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clrearing of road surface and spraying primer at the rate of 0.850 kg/sqm using mechanical means)

3 P-41/10.4 Filling Pot- holes and Patch Repairs with open - graded Premix surfacing, 20mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2)

for grading-III Material

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

SN P/I ITEM N L B H QTY RATE AMOUNT #REF!

1 P-41/10.4 Filling Pot- holes and Patch Repairs with open - graded Premix surfacing, 20mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2)

for grading-III Material

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

4 41/10.2 Maintenance of Earthen Shoulder (filling with fresh soil) (Making up loss of material/ irregularities on shoulder to the design level by adding fresh approved soil and compacting it with appropriate equipment.)

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

DETAILED ETIMATE FOR WMM PATCH AND B.T. PATCH OF DOMNARA-BARRA-JOBI-KAFARMAR ROAD

SN P/I ITEM N L B H QTY RATE AMOUNT DETAILED ETIMATE FOR WMM PATCH AND B.T. PATCH OF DOMNARA-BARRA-JOBI-KAFARMAR ROAD

2 P-19/4.11 (B) (i) Water Bound Macadam (Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.)

Grading- II (Using Screening Crushable type such as Moorum or Gravel)

Using Screening Crushable type such as Moorum or Gravel

3 21/5.1 Prime coat (Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clrearing of road surface and spraying primer at the rate of 0.850 kg/sqm using mechanical means)

1 P-41/10.4 Filling Pot- holes and Patch Repairs with open - graded Premix surfacing, 20mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2)

for grading-III Material

7 41/10.2 Maintenance of Earthen Shoulder (filling with fresh soil) (Making up loss of material/ irregularities on shoulder to the design level by adding fresh approved soil and compacting it with appropriate equipment.)

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

DETAILED ETIMATE FOR CONSTRUCTION OF B.T. ROAD AT KHARSIA BY-PASS NO 2 , KM 3/2(30M) TO 3/4(150M)= ( 180 m)

SN P/I ITEM N L B H QTY RATE AMOUNT DETAILED ETIMATE FOR CONSTRUCTION OF B.T. ROAD AT KHARSIA BY-PASS NO 2 , KM 3/2(30M) TO 3/4(150M)= ( 180 m)

2 P-19/4.11 (B) (i) Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.)

km 1 to 3/4=2.2 km

3 21/5.1 Prime coat (Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clrearing of road surface and spraying primer at the rate of 0.850 kg/sqm using mechanical means)

4 21/5.2 (ii) Tack coat Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor on the prepared bituminous/ granular surface cleaned with mechanical broom and as per clause 503 of section 500.

(ii) Dry and hungry bituminous surface/granular surfaces treated with primes @ 0.30 kg/sqm

1 P-41/10.4 Filling Pot- holes and Patch Repairs with open - graded Premix surfacing, 20mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2)

for grading-III Material

7 41/10.2 Maintenance of Earthen Shoulder (filling with fresh soil) (Making up loss of material/ irregularities on shoulder to the design level by adding fresh approved soil and compacting it with appropriate equipment.)

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

N.I.T. SCHEDULE OF B.T. PATCH REPAIR OF VARIOUS ROADS OF KHARSIA SUB DIVISION 1 N.I.T. SCHEDULE OF B.T. PATCH REPAIR OF VARIOUS ROADS OF KHARSIA SUB DIVISION

P.A.C.AMOUNT 20.0 lakhs

SN PAGE CHAPTER ITEM N0 SUB ITEM ITEM QTY UNIT RATE AMOUNT

1 43 10 10.3 - Filling Pot-holes and Patch Repairs with Close Graded Premix Surfacing / Mixed Seal Surfacing, 20mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot-holes with hot bituminous material as per clause 512, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2 i/c tack coat.) 12739.01 SQM 157.0 2000025.0

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

DETAILED ESTIMATE OF B.T. PATCH REPAIR OF VARIOUS VILLAGE ROADS OF KHARSIA SUB DIVISION (PART-1) 1 DETAILED ESTIMATE OF B.T. PATCH REPAIR OF VARIOUS VILLAGE ROADS OF KHARSIA SUB DIVISION (PART-1)

SN P/I ITEM N L B H QTY RATE AMOUNT

1 P-43/I-10.2 Filling Pot-holes and Patch Repairs with Open-Graded Premix Surfacing, 20mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2 i/c tack coat.)

Khamhar to Beharchuan Road 10% 12000.0 3.0 3600.0

Gadapali to Sajapali Road 10% 3000.0 3.0 900.0

Farkanara-Puchhiapali-Tandapara to Khamhar Road 18.1% 6100.0 3.0 3312.3

2 P-43/I-10.3 Filling Pot-holes and Patch Repairs with Open-Graded Premix Surfacing, 20mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2 i/c tack coat.)

Khamhar to Beharchuan Road 10% 12000.0 3.0 3600.0

Gadapali to Sajapali Road 10% 3000.0 3.0 900.0

Farkanara-Puchhiapali-Tandapara to Khamhar Road 18.1% 6100.0 3.0 3312.3

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

DETAILED ESTIMATE OF B.T. PATCH REPAIR OF VARIOUS VILLAGE ROADS OF KHARSIA SUB DIVISION (PART-1) 1 DETAILED ESTIMATE OF B.T. PATCH REPAIR OF VARIOUS VILLAGE ROADS OF KHARSIA SUB DIVISION (PART-1)

SN P/I ITEM N L B H QTY RATE AMOUNT

1 P-43/I-10.2 Filling Pot-holes and Patch Repairs with Open-Graded Premix Surfacing, 20mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2 i/c tack coat.)

Khamhar to Beharchuan Road 10% 12000.0 3.0 3600.0

Gadapali to Sajapali Road 10% 3000.0 3.0 900.0

Farkanara-Puchhiapali-Tandapara to Khamhar Road 18.1% 6100.0 3.0 3312.3

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

DETAILED ESTIMATE OF B.T. PATCH REPAIR OF VARIOUS VILLAGE ROADS OF KHARSIA SUB DIVISION (PART-II) 2 DETAILED ESTIMATE OF B.T. PATCH REPAIR OF VARIOUS VILLAGE ROADS OF KHARSIA SUB DIVISION (PART-II)

SN P/I ITEM N L B H QTY RATE AMOUNT

1 P-41/10.5 Filling Pot- holes and Patch Repairs with - Bituminous concrete, 40mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2)

for grading II Material

Bargarh-Sarwani Road 15% 4600.0 3.0 2070.0

Bargarh-Dhimani Road 12% 4800.0 3.0 1728.0

Kharsia-Tiyur Road 15% 7000.0 3.0 3150.0

Halahuli-Turekela Road 10.3% 2800.0 3.0 865.2

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

DETAILED ESTIMATE OF B.T. PATCH REPAIR OF VARIOUS VILLAGE ROADS OF KHARSIA SUB DIVISION (PART-III) 3 DETAILED ESTIMATE OF B.T. PATCH REPAIR OF VARIOUS VILLAGE ROADS OF KHARSIA SUB DIVISION (PART-III)

SN P/I ITEM N L B H QTY RATE AMOUNT

1 P-41/10.5 Filling Pot- holes and Patch Repairs with - Bituminous concrete, 40mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2)

for grading II Material

Chaple-Basnajhar Road 10% 14000.0 3.0 4200.0

Basnajhar Saraipaipali to Ranisagar Road 12% 7200.0 3.0 2592.0

Rajghatta Approach Road 12.14% 2800.0 3.0 1019.8

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

DETAILED ESTIMATE OF B.T. PATCH REPAIR OF CHHAL CHADGHODA ROAD OF KHARSIA SUB DIVISION 4 DETAILED ESTIMATE OF B.T. PATCH REPAIR OF CHHAL CHADGHODA ROAD OF KHARSIA SUB DIVISION

SN P/I ITEM N L B H QTY RATE AMOUNT

1 P-41/10.5 Filling Pot- holes and Patch Repairs with - Bituminous concrete, 40mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2)

for grading II Material

CHHAL GHADGHODA ROAD

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

Kurru Kafarmar Road 15% 3100.0 3.0 1395.0

Barra to Khamhar Road 10% 3800.0 3.0 1140.0

Gadapali to Sajapali Road 10% 3000.0 3.0 900.0

2 Gidha approach Road 10% 3600.0 3.0 1080.0

3 Halahuli-Turekela Road 10% 3000.0 3.0 900.0

4 Telikot-Thusekela to Rajivnagar Road 10% 4100.0 3.0 1230.0

6 Chaple-Basnajhar Road 5% 14000.0 3.0 2100.0

DETAILED ESTIMATE OF B.T. PATCH REPAIR OF DIFFERENT ROADS OF KHARSIA SUB DIVISION DETAILED ESTIMATE OF B.T. PATCH REPAIR OF DIFFERENT ROADS OF KHARSIA SUB DIVISION

SN P/I ITEM N L B H QTY RATE AMOUNT

1 P-41/10.4 Filling Pot- holes and Patch Repairs with open - graded Premix surfacing, 20mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2)

Edu-Barbhona-Singhanpur Road (22.40 km) 1 22400.0 3.0 67200.0

Jobi-Bargarh Road(13.30 km) 1 9000.0 3.0 27000.0

Chhal-Gharghoda Road(26.4 km) 1 12000.0 7.0 84000.0

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

DETAILED ESTIMATE OF B.T. PATCH REPAIR OF VARIOUS ROADS OF KHARSIA SUB DIVISION DETAILED ESTIMATE OF B.T. PATCH REPAIR OF VARIOUS ROADS OF KHARSIA SUB DIVISION

SN P/I ITEM N L B H QTY RATE AMOUNT

1 P-41/10.4 Filling Pot- holes and Patch Repairs with open - graded Premix surfacing, 20mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2)

Domnara-Barra-Jobi-Kafarmar Road(19.5 km) 60% 5000.0 3.0 9000.0

Chhal-Gharghoda Road(26.4 km)

KHAMHAR-KHADGAON-KATAUD-MINGI TO RAMPUR ROAD(15.00KM)

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

DETAILED ESTIMATE OF B.T. PATCH REPAIR OF DIFFERENT ROADS OF KHARSIA SUB DIVISION UNDER PG DETAILED ESTIMATE OF B.T. PATCH REPAIR OF DIFFERENT ROADS OF KHARSIA SUB DIVISION UNDER PG

SN P/I ITEM N L B H QTY RATE AMOUNT

1 P-41/10.4 Filling Pot- holes and Patch Repairs with open - graded Premix surfacing, 20mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2)

Kharsia-Dabhra-Chandrapur Road (2.40 km) 11% 2400.0 4.95 1306.8

Hati-Kharsia Road (17.00 km) 25% 3200.0 7.0 5600.0

Domnara-Barra-Jobi-Kafarmar Road(19.5 km) 10% 4000.0 7.0 2800.0

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

DETAILED ESTIMATE OF B.T. PATCH REPAIR OF DOMNARA-BARRA-JOBI KAFARMAR,CHAL GHDGHODA ROAD AND KHAMHAR-KHADGAON-KATAUD-MINGI TO RAMPUR ROAD OF KHARSIA SUB DIVISION DETAILED ESTIMATE OF B.T. PATCH REPAIR OF DOMNARA-BARRA-JOBI KAFARMAR,CHAL GHDGHODA ROAD AND KHAMHAR-KHADGAON-KATAUD-MINGI TO RAMPUR ROAD OF KHARSIA SUB DIVISION

SN P/I ITEM N L B H QTY RATE AMOUNT

1 P-41/10.4 Filling Pot- holes and Patch Repairs with open - graded Premix surfacing, 20mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2)

Domnara Barra Jobi Kafarmar Road(19.50 km)

Chhal-Gharghoda Road(26.4 km)

Khamhar-Khadgaon-Kataud-Mingi to Rampur Road(15.0 km)

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

DETAILED ESTIMATE FOR B.T. PATCH OF BY-PASS NO-1 ROAD AT KHARSIA SUB DIVISION DETAILED ESTIMATE FOR B.T. PATCH OF BY-PASS NO-1 ROAD AT KHARSIA SUB DIVISION

SN P/I ITEM N L B H QTY RATE AMOUNT

1 P-18/4.1 A Construction of granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401 with mechanically crushed stone only

Plant mix method

(i) for grading-III Material

2 P-19/4.11 (B) (i) Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.)

3 21/5.1 Prime coat (Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clrearing of road surface and spraying primer at the rate of 0.850 kg/sqm using mechanical means)

4 21/5.2 (ii) Tack coat Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor on the prepared bituminous/ granular surface cleaned with mechanical broom and as per clause 503 of section 500.

(ii) Dry and hungry bituminous surface/granular surfaces treated wiyh primes @ 0.30 kg/sqm

5 24/5.13 (i) Bituminous Macadam (Providing and laying bituminous macadam with 60-90 TPH hot mix plant using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction)

With mechanical paver finisher

for Grading II (19 mm nominal size, bitumen content 3.40%)

6 24/5.14 A Close Graded Premix Surfacing / Mixed Seal Surfacing (Mechanical means using HMP of appropriate capacity not less than 60 tonnes/hour. Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness using penetration grade bitumen to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade. )

With 60/70 grade bitumen

Type B ( 13.2 mm to 0.09 mm size aggregates )

7 P-41/10.4 Filling Pot- holes and Patch Repairs with open - graded Premix surfacing, 20mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2)

for grading-III Material

8 20/ 4.14 Construction of shoulders (Construction of shoulders as per clause 407 with selected soil from borrow pits / borrow areas having CBR not less than 12and shall have L.L. and P.I. Not more than 25% and 6% respectively, inclusive of all leads and lifts, including clearing and scrapping of existing surface, providing 4% camber, watering rolling and royalty charges etc. complete. Y Y

B With Smooth wheeled roller

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

DETAILED ESTIMATE FOR B.T. PATCH OF BY-PASS NO 1 & 2 ROAD AT KHARSIA SUB DIVISION DETAILED ESTIMATE FOR B.T. PATCH OF BY-PASS NO 1 & 2 ROAD AT KHARSIA SUB DIVISION

SN P/I ITEM N L B H QTY RATE AMOUNT

1 P-19/4.8 (B) (i) Water Bound Macadam (Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.)

Grading- III (Using Screening Crushable type such as Moorum or Gravel)

Using Screening Crushable type such as Moorum or Gravel

2 21/5.1 Prime coat (Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clrearing of road surface and spraying primer at the rate of 0.850 kg/sqm using mechanical means)

3 P-41/10.4 Filling Pot- holes and Patch Repairs with open - graded Premix surfacing, 20mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2)

for grading-III Material

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

SN P/I ITEM N L B H QTY RATE AMOUNT #REF!

1 P-41/10.4 Filling Pot- holes and Patch Repairs with open - graded Premix surfacing, 20mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2)

for grading-III Material

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

4 41/10.2 Maintenance of Earthen Shoulder (filling with fresh soil) (Making up loss of material/ irregularities on shoulder to the design level by adding fresh approved soil and compacting it with appropriate equipment.)

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

DETAILED ETIMATE FOR WMM PATCH AND B.T. PATCH OF DOMNARA-BARRA-JOBI-KAFARMAR ROAD

SN P/I ITEM N L B H QTY RATE AMOUNT DETAILED ETIMATE FOR WMM PATCH AND B.T. PATCH OF DOMNARA-BARRA-JOBI-KAFARMAR ROAD

2 P-19/4.11 (B) (i) Water Bound Macadam (Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.)

Grading- II (Using Screening Crushable type such as Moorum or Gravel)

Using Screening Crushable type such as Moorum or Gravel

3 21/5.1 Prime coat (Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clrearing of road surface and spraying primer at the rate of 0.850 kg/sqm using mechanical means)

1 P-41/10.4 Filling Pot- holes and Patch Repairs with open - graded Premix surfacing, 20mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2)

for grading-III Material

7 41/10.2 Maintenance of Earthen Shoulder (filling with fresh soil) (Making up loss of material/ irregularities on shoulder to the design level by adding fresh approved soil and compacting it with appropriate equipment.)

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

DETAILED ETIMATE FOR CONSTRUCTION OF B.T. ROAD AT KHARSIA BY-PASS NO 2 , KM 3/2(30M) TO 3/4(150M)= ( 180 m)

SN P/I ITEM N L B H QTY RATE AMOUNT DETAILED ETIMATE FOR CONSTRUCTION OF B.T. ROAD AT KHARSIA BY-PASS NO 2 , KM 3/2(30M) TO 3/4(150M)= ( 180 m)

2 P-19/4.11 (B) (i) Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.)

km 1 to 3/4=2.2 km

3 21/5.1 Prime coat (Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clrearing of road surface and spraying primer at the rate of 0.850 kg/sqm using mechanical means)

4 21/5.2 (ii) Tack coat Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor on the prepared bituminous/ granular surface cleaned with mechanical broom and as per clause 503 of section 500.

(ii) Dry and hungry bituminous surface/granular surfaces treated with primes @ 0.30 kg/sqm

1 P-41/10.4 Filling Pot- holes and Patch Repairs with open - graded Premix surfacing, 20mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2)

for grading-III Material

7 41/10.2 Maintenance of Earthen Shoulder (filling with fresh soil) (Making up loss of material/ irregularities on shoulder to the design level by adding fresh approved soil and compacting it with appropriate equipment.)

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. KHARSIA P.W.D. SUB DIVISION KHARSIA P.W.D. DIVISION RAIGARH

GENERAL ABSRTACT

NAME OF THE WORK :- Abstract Estimate for S/R, MOW for Residential and non residential building under sub div-Sarangarh div- Sarangarh (CG)

UNDER B.I. NO. :- ………………………….

HEAD/SUB HEAD :- ………………………….

SL. NO. DESCRIPTION QTY. UNIT AMOUNT

1 Abstract Estimate for S/R, MOW for Residential and non residential building under sub div-Sarangarh div- Sarangarh (CG) Details Attached 3990456.00

TOTAL Rs. 3990456.00

Say Rs. 39.90 Lakh

SUB ENGINEER SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

P.W.D. SARANGARH P.W.D.SUB DIVISION SARANGARH P.W.D. DIVISION SARANGARH

Abstract Estimate for S/R, MOW for Residential and non residential building under sub div-Sarangarh div- Sarangarh (CG) Abstract Estimate for S/R, MOW for Residential and non residential building under sub div-Sarangarh div- Sarangarh (CG)

(The rates adopted are as per S.O.R. issued by E-in-C w.e.f. 01.01.2015 and amended upto date for Building works)

PAC Amount Rs. 39.90 Lakh

Sl. No. ITEM NO. ITEM DESCRIPTION UNIT RATE (in Rs.) QUANTITY AMOUNT (in Rs.)

1 1.1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. In all types of soils. Cum 185.00 12.00 2220.00

2 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. Cum 371.00 35.00 12985.00

3 2.1.1 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. sqm 139.00 72.50 10078.00

4 2.1.13 Weather shade, chhajja, Cornices and mouldings sqm 294.00 7.50 2205.00

5 2.1.6 Columns, beams & walls- circular or any other geometrical shape other than square and rectangular in all sizes sqm 356.00 20.00 7120.00

6 2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) sqm 235.00 7.50 1763.00

7 2.1.8 Beams, lintels, cantilevers & walls sqm 202.00 7.50 1515.00

8 3.1.3 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). cum 2970.00 47.50 141075.00

9 3.1.4 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size). cum 3552.00 43.00 152736.00

10 3.2.1 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). cum 4163.00 40.00 166520.00

11 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: cum 97.50 15.00 1463.00

12 3.12.1 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire all complete: (Thermo-Mechanically treated bars FE 415) kg 54.50 1800.00 98100.00

13 3.13 Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including form.work. Cum 4237.00 3.75 15889.00

14 4.21 Providing post water proofing treatment against dampness & Seepage in roof, terraces, sunken floor of toilets with reinforced acrylic breathable (polymer content 35%, elongation at break at > 100%) coating consisting of following operations: (i) Removing loose material and cleaning the surface. (ii) Priming in one coat with water based acrylic emulsion (iii) Three coats with reinforced acrylic breathable polymer.. Sqm 611.00 500.00 305500.00

15 7.5.4 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) cum 3263.00 40.00 130520.00

16 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: cum 121.00 15.00 1815.00

17 7.10.2 Half brick thick brick masonry with modular well-burnt clay bricks of crushing strength not less than 25 kg/sqcm and water absorption not more than 20% upto plinth level: Cement Mortar 1:4 (1 cement : 4 coarse sand) sqm 417.00 32.50 13553.00

18 8.12.2 Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges(35 mm. thick single leaf) Sqm 2,005.00 95.00 190475.00

19 8.13.3 Providing and fixing flush door shutters, conforming to IS 2202 (Part 1), interior grade, commercial type, core of block board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains, cross bands and face veneers on both faces of shutters excluding hinges. 30 mm. thick (single leaf) sqm 1197.00 40.00 47880.00

20 8.15 Extra for double leaf shutter instead of single leaf. Sqm 52.00 7.50 390.00

21 8.153 Providing and fixing 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 thick FRP laminate for panels confirming to IS: 14856 - 2000, complete Sqm 2,112.00 40.00 84480.00

22 8.16.1 Providing and fixing PVC membrane foil coated (laminated) flush door shutters, made with core of block board with frame of first class hard wood, coated with 0.30mm membrane pasted with resin using vacuam treatment process complete all but excluding hinges. 35 mm thick (single leaf) sqm 1982.00 11.25 22298.00

23 8.23.2 Providing and fixing 35mm thick wire gauge shutter having top and style rail 95mm width, bottom and lock rail 197mm width, using galvanized M.S. wire dia of 0.45 mm for doors, windows, clerestory windows excluding hinges.( Bijasal, Haldu, Benteak, Khair) Sqm 1,888.00 7.50 14160.00

24 8.25 Extra for providing fixing galvanized M.S. wire dia of 0.60 mm instead of wire dia 0.45mm to doors, windows and clerestory.windows. Sqm 18.00 42.50 765.00

25 8.33.2 Providing and fixing teak wood jamb lining with necessary screws, priming coat on exposed surfaces etc complete. (only jamb lining area is to be measured) 25 mm thick sqm 3962.00 1.50 5943.00

26 8.36.1 Providing and fixing commercial grade water proof ply for wall paneling on wooden frame with necessary nails complete as required. (19 mm) sqm 1231.00 7.50 9233.00

27 8.37 Providing and fixing approved shade veneering on wood wall paneling complete as required. sqm 705.00 3.00 2115.00

28 8.53 Providing and fixing expanded metal 20x60 mm stands 3.25 mm wide and .60mm thick to window including 62x19mm beading to teak wood including priming coat of red oxide zinc chromate primer. sqm 929.00 25.00 23225.00

29 8.55 Providing and fixing and galvanized wire mesh of I.S. gauge designation 85 G. with wires 0.56 mm dia to windows and clerestory windows including 19x12mm teak wood beading including priming coat of red oxide zinc chromate primer. sqm 443.00 35.00 15505.00

30 8.60.1 Providing and fixing bright finished brass sliding door bolt with nuts and brass polished MS screws complete: 300x16mm Each 475.00 20 9500.00

31 8.61.2 Providing and fixing brass door latch with brass polished MS screws complete:250x16x5 mm Each 268.00 20 5360.00

32 8.62.1 Providing and fixing bright finished brass tower bolts (barrel type) with brass polished MS screws complete: 250x10mm Each 276.00 20 5520.00

33 8.65.1 Providing and fixing bright finished brass door handles with brass polished MS screws complete: 125 mm Each 55.50 20 1110.00

34 8.94.2 Providing and fixing M.S. bright finished or black enameled Butt hinges IS : 1341 marked with necessary iron screws: 100x58x1.90 mm each 20.50 85 1743.00

35 8.99.1 Providing and fixing M.S. bright finished or black enameled sliding door bolts with bolts, nuts and necessary iron screws: 300x16mm each 77.50 85 6588.00

36 8.102.3 Providing and fixing M.S. bright finished or black enameled Tower bolts (Barrel type) with necessary iron screws: 150 mm each 23.00 85 1955.00

37 8.103.1 Providing and fixing M.S. bright finished or black enameled handles with necessary iron screws: 125 mm each 51.00 85 4335.00

38 8.127.2 Providing and fixing powder coated aluminium door latch with 12mm rod, necessary M.S. nuts bolts and screws etc complete.(250x12mm) Each 54.50 85 4633.00

39 8.128.3 Providing and fixing powder coated aluminium tower bolts (Barrel type) with necessary M.S. screws etc complete.(150 x10mm) Each 46.50 85 3953.00

40 8.129.2 Providing and fixing powder coated aluminium door handles 2.5mm thick with necessary M.S. screws etc complete.(125 mm) Each 27.50 85 2338.00

41 8.150 Providing and fixing factory made 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mm X 25mm or less as per requirement with an average wall thickness of 1mm ± 0.3mm. PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. An M.S. tube having dimensions 19mm x 19mm is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25mm X 11mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufactures' specification. sqm 2583.00 25.50 65867.00

42 8.151 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge . metre 346.00 80.00 27680.00

43 8.158 Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc complete. each 1450.00 8 10875.00

44 9.1 Providing and fixing Structural steel work in single section including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. kg 61.50 400.00 24600.00

45 9.3.1 Providing and fixing Steel work in tubular (round, square or rectangular hollow tubes etc.) structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer. Electric resistance or induction butt welded tubes Grade-250 kg 88.50 635.00 56198.00

46 9.11 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys complete with bolts, nuts, locking arrangement stoppers, handles including applying a priming coat of red oxide zinc chromate primer. sqm 3330.00 6.75 22478.00

47 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer. Kg 75.00 140.00 10500.00

48 9.15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. kg 67.50 390.00 26325.00

49 9.16.2 Providing and fixing M.S. frames of doors, windows, ventilators and cupboards joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.( Angle-iron frames ) kg 73.50 95.00 6983.00

50 9.17 Providing and fixing factory made ISI marks steel doors, windows and ventilators side/ top/ centre hung made up of standard rolled steel section conforming to IS 1038:1968 (viz. F7D, F4B, K11 and K12B etc.), joints mitred and flash butt and sash bars tenoned and riveted/ welded with 10 cm long lugs of size 15x3mm embedded in cement concrete block 15x10x10 cms of 1:3:6 (1 cement :3 Coarse sand: 6 graded stone aggregate 20 mm nominal size) or rawl plugs and screws or with bolts and nuts as required including providing and fixing of hinges, pivots, handles, pegs, stays, rolling devices, locking arrangements, spring catch etc., as required complete including applying a priming coat of red oxide zinc chromateprimer. Kg 88.00 245.00 21560.00

51 9.23.2 Providing and fixing frosted glass panes with steel glazing clips and special metal sash putty of approved make in steel doors, windows, ventilators:(5 mm thick) Sqm 717.00 47.50 34058.00

52 9.34 Providing and fixing stainless wire gauge of average width of aperture 1.56mm with wire of 0.35mm to existing steel door, window shutter frames with necessary M.S. strip beading etc. complete . sqm 791.00 47.50 37573.00

53 9.44 Providing and fixing “NETLON insect screens” with 25mm wide Hook and loop tape all around to wooden/ aluminium/ steel windows, ventilators and the like complete. . sqm 278.00 19.00 5282.00

54 9.47.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately: For fixed portion kg 331.00 47.50 15723.00

55 9.47.2 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/neoprene gasket required (Fittings shall be paid for separately). Kg 338.00 120.00 40560.00

56 9.49 Extra for polyester powder coated (minimum 50 micron) aluminium sections instead of anodized . Kg 34.50 137.50 4744.00

57 9.50.1 Providing and fixing 12mm thick pre-laminated particle board flat pressed with decorative lamination and balancing lamination on specified sides exterior Grade – I MDF Board 12 mm thick confirming to IS:14587, including fixed in aluminium doors, windows shutters and partition frames with C.P. brass/ stainless steel screws etc. complete. 34.50With decorative lamination on one side and balancing lamination on other side. Sqm 845.00 22.50 19013.00

58 9.51.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness sqm 708.00 22.50 15930.00

59 9.56 Providing and fixing of floor spring IS: marked (Everite, Door link or any equivalent make) with stainless steel cover plate each 1920.00 8 14400.00

60 9.57.2 Providing stainless steel railing/ grill made of S.S. flats, hollow S.S. pipe or square/ rectangular sections of approved design fixing in stair case, balcony or other places with metal fasteners and stainless steel bolts etc complete..(SS Grade 304) Kg 525.00 55.00 28875.00

61 9.59.2 Extra for providing and fixing reflective glass panes in aluminium door, window, ventilator shutters and partitions instead of float glass. (5 mm thickness) Sqm 292.00 47.50 13870.00

62 9.61.1 Providing and fixing aluminium composite panels in approved panel sizes, thickness and shape on aluminium frame work on face of building. (Frame to be paid separately): 3 MM thick Sqm 1,283.00 5.25 6736.00

63 10.5.3 Providing ridges or hips of 60cm overall width in plain G.I. sheet fixed with galvanized washers J or L hooks, bolts and nuts 8mm G.I. limpet and bitumen washers complete. 0.63 mm thick sheet with zinc coating not less than 275gm/sqm metre 445.00 42.50 18913.00

64 10.11 Supply and fixing of precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Sqm 636.00 132.50 84270.00

65 10.17 Providing asbestos cement 6mm thick corrugated or semi corrugated sheets roofing fixed with galvanized J or L hooks, bolts and nuts 8mm dia G.I. plain bitumen washers complete excluding the cost of purlins, rafters and trusses. sqm 347.00 15.00 5205.00

66 10.46 Providing and laying Manglore pattern tiles 20 mm thick (without hip or ridge tiles) on steel/ wooden frame (frame work to be paid separately) sqm 592.00 7.50 4440.00

67 10.47 Providing and laying Manglore pattern hips and ridge tiles fixed in cement mortar 1:6 etc. complete metre 130.00 7.50 975.00

68 10.50 Providing and fixing 100 mm diameter and 60 cm long stone ware rain water spout in cement mortar 1:4 (1 cement : 4 fine sand) each 61.50 7.50 461.00

69 10.54 Extra for sunk or raised mouldings in the Gypsum board/ plaster of paris false ceiling. Sqm 185.00 25.00 4625.00

70 10.61 Providing and fixing at all height false ceiling consisting of frame work "W"/ "U" / "L" sections made of G.I. sheet with zinc coating of grade 120 consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.55mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed including providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part-I all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting. Sqm 658.00 25 16450.00

71 11.1.2 Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand) sqm 87.00 95.00 8265.00

72 11.2.3 Providing and making 12mm thick cement plaster of mix { In Cement Mortar 1:5 (1 cement : 5 fine sand)} Sqm 96.50 415.00 40048.00

73 11.2.4 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) sqm 91.50 415.00 37973.00

74 11.3.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:{ In Cement Mortar 1:5 (1 cement : 5 fine sand)} Sqm 113.00 255.00 28815.00

75 11.3.4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) sqm 107.00 180.00 19260.00

76 11.9 Extra for providing and mixing water proofing materials in cement plaster work in proportion as recommended by manufacturer. kg 43.50 95.00 4133.00

77 11.10 Providing and mixing in cement mortar, triangular polyester fiber Recron 3s (Anti-shrinkage Admixture) of 6 mm length of approved make like Reliance industries Ltd etc. in proportion as recommended by manufacturer. kg 366.00 7.50 2745.00

78 11.41 Providing and fixing chicken mesh weighting not less than 250 gms/ sqm as per IS : specification in the required width with 40mm long steel nails on vertical and horizontal surface near R.C.C. and brick walls junctions including scaffolding and all lead and lifts etc. complete before plastering upto 10mts in height. sqm 86.00 42.50 3655.00

79 12.3.2 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50 mm thick sqm 254.00 60.00 15240.00

80 12.7.2 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete. sqm 646.00 95.00 61370.00

81 12.9.2 Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete. Size above 300x300mm sqm 728.00 95.00 69160.00

82 12.76.1 Providing and laying Glazed Vitrified fioor tiles (GVT/ PGVT ) with digital print of random design with water absorption less than 0.05% and conforming to IS: I 5622-2017 of 1st quality of approved make in all colours, shades and size mentioned below (+/- 1Omm), laid on 20mm thick cement mortar 1:4 (l cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size 600x600mm thickness 9 to l0mm sqm 964.00 95.00 91580.00

83 12.15 Deduct for not using 20mm thick cement mortar 1:4 (1 cement : 4coarse sand) bedding in laying of floor tiles. sqm 240.00 55.00 13200.00

84 12.38.5 15mm thick Marble stone slab flooring over 18mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including grinding rubbing and polishing etc. complete. (Area of slab should be 0.50 sqm and above) Udaipur green marble sqm 1497.00 7.50 11228.00

85 12.45.1 15 mm thick Table rubbed polished Granite stone slab flooring laid over 20mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing etc. complete. (Area of slab should be 0.50 sqm and above) Granite stone grey/pink sqm 1796.00 7.50 13470.00

86 12.45.3 15 mm thick Table rubbed polished Granite stone slab flooring laid over 20mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing etc. complete. (Area of slab should be 0.50 sqm and above) Granite stone lakha red/ shahi red Sqm 4200.00 4.50 18900.00

87 12.46.3 15 mm thick Table rubbed polished Granite stone slab in risers and treads of steps skirting dado and pillars laid on 12mm (Average) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry including rubbing and polishing etc. complete (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 m). Granite stone lakha red/ shahi red Sqm 4273.00 3.00 12819.00

88 12.49 25 mm thick KOTA stone slab flooring over 20mm (Average) thick base of cement mortar 1:4 laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding rubbing and polishing etc. complete (Area of slab to be over 0.20 sqm and upto 0.50 sqm) sqm 897.00 25.00 22425.00

89 12.50 KOTA stone slab 25mm thick in risers and treads of steps, skirting dado and pillar laid in 12mm (Average) thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. (single stone is to be used for riser and treads of steps and the width of stone for skirting and dado shall be equal to the height of skirting/ dado up to length of 1.0 M.) sqm 990.00 14.50 14355.00

90 12.55 Extra for necessary grinding and polishing to get mirror finish on KOTA/ Marble Stone flooring/ steps/ treads instead of normal grinding and polishing. Sqm 263.00 57.50 15123.00

91 12.56 25mm thick Local RAJIM/ Red Flag stone slab flooring laid over 20mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid over & jointed with grey cement slurry mixed with pigments to match the shade of the stone i/c grinding, rubbing and polishing. sqm 516.00 42.40 21878.00

92 12.65.2 Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cm Pigment Coloured (rubber mould) precast interlock concrete blocks sqm 632.00 53.50 33812.00

93 13.6.2 15mm thick Granite work (machine cut, table rubbed & mirror polished) for kitchen platform, vanity counters, window sills and similar locations of required size laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) including joints treated with white cement mixed with matching pigment including rubbing and polishing to edge moulding to give high gloss finish. (Granite black stone ) sqm 3279.00 4.50 14756.00

94 14.9.1 Distempering with acrylic washable distemper to give an even shade. On new work (Two or more coats) sqm 38.00 180.00 6840.00

95 14.9.2 On old work (one or more coats) sqm 17.50 395.00 6913.00

96 14.11.2 Wall painting with acrylic luxury emulsion (plastic) paint of required shade to give an even shade. On old work (one or more coats) sqm 33.50 320.00 10720.00

97 14.13 Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even. sqm 94.50 95.00 8978.00

98 14.14.1 Finishing walls with water proofing cement paint of required shade to give an even shade. On new work (Two or more coats applied @ 3.84 kg/10 sqm) sqm 41.00 180.00 7380.00

99 14.14.2 On old work (one or more coats applied @ 2.20 kg/10 sqm) sqm 25.50 500.00 12750.00

100 14.16.1 Painting exterior surface with PREMIUM ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with: On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) sqm 74.50 132.50 9871.00

101 14.16.2 On old work (One or more coats applied @ 0.83 ltr/ 10 sqm) sqm 47.50 sqm 47.50 197.50 9381.00

102 14.22.2 Painting on new work (two or more coats) to give an even shade with: Premium synthetic enamel paint sqm 47.00 180.00 8460.00

103 14.25 Providing and laying french sprit polish on new wood work after preparing the surface by rubbing down smooth with sand papers, covering the knots, if visible, applying a coat of wood filler, cleaning the surface, applying 50 or more coats of french spirit polish till the surface gives high gloss. Sqm 143.00 47.50 6793.00

104 14.45 Removing dry or oil bound distemper by scraping sand papering and preparing the surfaces smooth including necessary repair to scratches etc. complete. sqm 5.20 180.00 936.00

105 14.46 Removing old paint or polish by paint remover or blow lamp or any other means as approved including preparing the surface smooth after removing the paint. sqm 32.50 132.50 4306.00

106 16.1 Dismantling rammed moorum and boulders or rammed moorum and silt in foundation or under floor including all lead and lifts. cum 279.00 7.50 2093.00

107 16.3.3 Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead. In cement mortar. cum 263.00 7.50 1973.00

108 16.10 Dismantling cement asbestos or other hard board ceiling or partition wall including stacking of serviceable material and disposal of unserviceable material within 50m lead. sqm 13.50 132.50 1789.00

109 16.11 Dismantling single Allahabad tiles or Manglore tiles or single wheel tiles including roof timber (excluding trusses), including stacking of serviceable material and disposal of unserviceable material within 50m lead. sqm 44.00 95.00 4180.00

110 16.12 Dismantling single Allahabad tiles or Manglore tiles or single wheel tiles excluding roof timber, including stacking of serviceable material and disposal of unserviceable material within 50m lead. sqm 27.50 253.50 6971.00

111 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. each 100.00 95 9500.00

112 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. each 66.50 95 6318.00

113 16.28 Taking out door shutters (steel or wood) including stacking within 50 metres lead. each 46.50 95 4418.00

114 16.29 Taking out window shutters (steel or wood) including stacking within 50 metres lead. each 33.50 95 3183.00

115 16.36 Dismantling terrazzo or mosaic or glazed vitreous or patent cement or tiled flooring or dado skirting of any thickness without sub base. sqm 22.50 255.00 5738.00

116 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. sqm 11.00 395.00 4345.00

117 16.40 Dismantling expanded metal or welded fabrics with battens and beading including stacking the serviceable material within 50 metres lead. sqm 15.50 25.00 388.00

118 16.42 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material within 50 metre lead. cum 768.00 7.50 5760.00

119 16.43.2 Demolishing cement concrete including disposal of material within 50 metre lead. 1:3:6 or richer mix cum 549.00 11.25 6176.00

120 16.53.1 Removing following vitreous china sanitorywares carefully for re-use including stacking within 50 metres lead. (Wash basin of all sizes and shapes) each 30.50 95 2898.00

121 16.53.2 Urinals of all sizes and shapes each 38.00 15 570.00

122 16.53.3 European/ Anglo/ Indian WC pan of all sizes each 46.00 55 2530.00

123 16.53.3 PVC Cistern each 23.00 95 2185.00

124 17.1.1 Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of rubbish to the dumping ground within 50metres lead : Thickness upto 15mm sqm 132.00 170.00 22440.00

125 17.2.1 Providing and replacing broken floor tile with ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including removing the broken tile and mortar, pointing the joints with white cement mixed with matching pigment etc., complete. Size 300x300mm sqm 1151.00 22.50 25898.00

127 17.9.1 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts embedding hold fasts in cement concrete blocks with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 metres lead : ( Door chowkhats) each 441.00 8 3308.00

128 17.9.2 Window chowkhats each 317.00 8 2378.00

129 17.9.3 Clerestory window chowkhats each 219.00 8 1643.00

130 17.10 Fixing chowkhat in existing opening in brick / RCC wall with dash fasteners/ chemical fastener of appropriate size (3nos on each vertical member of door chowkhat and 2 nos. on each vertical member of window chowkhats including cost of dash fasteners/ chemical fastener. each 94.00 8 705.00

131 17.12.1 Renewing glass panes, with putty and nails wherever necessary: (Float glass panes of thickness 4 mm) sqm 524.00 57.50 30130.00

132 17.13.2 Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of thickness 5.5 mm sqm 765.00 11.25 8606.00

133 17.19 Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab including cutting chase and making good and painting exposed portion of the clamps complete. each 144.00 43 6192.00

134 17.21 Renewing Bijasal wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : cum 60050.00 0.15 9008.00

135 17.22 Renewing Bijasal wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : Not exceeding 4.00 metres in length. cum 60901.00 0.15 9135.00

136 17.23 Renewing aluminium door/ window by replacing demaged member by anodised/ powder coated aluminium sections of same diamentions complete including depositng dismentalled section at departmental.store. Kg 354.00 65.00 23010.00

137 17.25.1 Providing and replacing broken/ damaged false ceiling tiles with new ceiling tiles on existing frame work.( 12mm thick unveneered Nova teak or equivalent super plain tiles) Sqm 604.00 42.50 25670.00

138 17.25.3 Providing and replacing broken/ damaged false ceiling tiles with new ceiling tiles on existing frame work.( 12 mm thick half random perorated tiles Perforated area 13%) Sqm 583.00 42.50 24778.00

139 18.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Long pattern W.C. pan of size 580 mm each 2459.00 8 18443.00

140 18.2.1 Providing and fixing vitreous china water closet squatting pan (Indian type) including cutting and making good the walls and floors wherever required: White Long pattern W.C. pan of size 580 mm each 999.00 15 14985.00

141 18.4.1 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all: fittings and fixtures complete including cutting and making good the walls and floors wherever required : White pedestal type each 2882.00 8 21615.00

142 18.6.1 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan including cutting and making good the walls and floors wherever required: White pedestal type each 1180.00 15 17700.00

143 18.7.1 Providing and fixing 10 litre capacity P.V.C. low level flushing cistern conforming to IS : 7231, with all fittings and fixtures complete. White each 729.00 43 31347.00

144 18.10.1 Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe with PTMT nuts and PVC bush of approved quality and colour: 30 CM length each 56.00 170 9520.00

145 18.11.2 Providing and fixing 15 mm nominal bore C.P copper connection pipe with C.P brass nuts collar and PVC bush of approved quality: 45 CM length each 239.00 65 15535.00

146 18.13.2 Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete: Flat back type urinal of size 460x380x250mm each 1529.00 8 12232.00

147 18.14.2 Providing and fixing white vitreous china urinal basin as per IS : 2556 complete: Flat back type urinal of size 460x380x250mm each 872.00 6 5232.00

148 18.15 Providing and fixing one piece construction white vitreous china squatting plate urinal with an integral rim longitudinal flushing pipe, standard size G.I. flush pipe for back and front flush, C.P. brass coupling complete including cutting and making good the walls and floors etc. wherever required : each 2014.00 7 14098.00

149 18.16 Providing and fixing one piece construction white vitreous china squatting plate urinal with an integral rim longitudinal flushing pipe. each 1401.00 6 8406.00

150 18.17.1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450 mm each 1430.00 35 50050.00

151 18.17.4 White Angle back size 400x400 mm each 1174.00 3 3522.00

152 18.20.2 Providing and fixing stainless steel AISI-304(18/8) wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :( Size 510x410 mm) Each 4095.00 2 6143.00

153 18.23.2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of brackets, cutting and making good the wall wherever required : Size 600x450x200mm each 4502.00 2 6753.00

154 18.25.1 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia each 68.50 135 9248.00

156 18.27.1 Providing and fixing cast iron grating for gully trap. 100x100mm square or round each 30.00 48 1440.00

157 18.30.1 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : (5mm thick mirror) Sqm 2016.00 3 6048.00

158 18.32.1 Providing and fixing sand cast iron S&S pipe as per IS: 1729 for soil, waste and vent pipes: 100 mm dia. metre 783.00 7.50 5873.00

159 18.33.1 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : For 100 mm dia pipe each 85.50 48 4104.00

160 18.76.2 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. {110 mm dia pipe.} Meter 267.00 95.00 25365.00

161 18.77.1.1 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. { Tee/ Tee with door/ Bend 45°/ Bend 90° } 75 mm Each 113.00 7.50 848.00

165 18.77.2.2 Double " Y " with or without door 110 mm each 224.00 45.00 10080.00

167 18.77.8 Plain reducing Tee 110x75mm each 129.00 45.00 5805.00

168 18.78.2 Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm each 61.00 60.00 3660.00

169 19.4.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. INTERNAL WORK - EXPOSED ON WALL {40 mm nominal outer dia .Pipes.} metre 362.00 7.50 2715.00

170 19.4.4 32 mm nominal outer dia .Pipes. metre 271.00 7.50 2033.00

171 19.5.1 19.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. CONCEALED WORK including cutting chases and making good the walls etc., (15 mm nominal outer dia .Pipes.) metre 133.00 265.00 35245.00

172 19.5.3 25 mm nominal outer dia .Pipes. metre 213.00 180.00 38340.00

173 19.7.1 Providing and fixing on wall surface G.I. pipes medium class complete with G.I. fittings and clamps, including cutting, making good the walls etc. and testing of joints complete: (15 mm dia. nominal bore) metre 149.00 7.50 1118.00

174 19.7.2 20 mm dia. nominal bore metre 185.00 7.50 1388.00

175 19.7.3 25 mm dia. nominal bore metre 258.00 7.50 1935.00

176 19.7.4 32 mm dia. nominal bore metre 318.00 7.50 2385.00

177 19.8.1 Providing and fixing concealed in wall G.I. pipes medium class complete with G.I. fittings and clamps, including painting with anti corrosive bitumastic paint, cutting chases, making good the walls etc. and testing of joints complete: (15 mm dia nominal bore) metre 188.00 7.50 1410.00

178 19.8.2 20 mm dia nominal bore metre 221.00 45.00 9945.00

179 19.13.2. Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality: Bib cock (350 grams) Each 237.00 120 28440.00

181 19.14.1 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Bib cock (400 grams) each 382.00 5 1719.00

182 19.14.2 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: {Long nose bib cock (500 grams)} Each 455.00 3 1365.00

183 19.14.5 Two way bib cock (800 grams) Each 708.00 38 26904.00

184 19.14.8. Basin mixer pillar tap with spout (1000 grams) Each 1248.00 6 7488.00

185 19.14.11 Hand shower set with flexible extension pipe Each 754.00 65 49010.00

186 19.14.13 Toilet paper holder Each 248.00 55 13640.00

187 19.14.14 Soap dish plate Each 163.00 65 10595.00

188 19.14.15 Shower rose (revolving type) (150mm) Each 269.00 75 20175.00

189 19.14.16 Towel rail (600mm long x 20mm dia) Each 338.00 60 20280.00

190 19.14.17 Towel ring (150 mm dia) Each 254.00 65 16510.00

191 19.15 Providing and fixing stainless steel drain jali of approved make/quality. each 51.00 135 6885.00

192 19.16.1 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 25 mm nominal bore each 436.00 55 23980.00

193 19.17.1 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore each 284.00 65 18460.00

194 19.42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank litre 7.30 17000 124100.00

195 19.47 Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design : each 754.00 6 4524.00

Say Rs. Lakh 39.90

SUB ENGR. SUB DIVISIONAL OFFICER EXECUTIVE ENGINEER

Sarangarh PWD(B/R) PWD(B/R)

Sub Dn.- Sarangarh Raigarh, Division- Sarangarh

To enable entering data into the sheet, please click on 'Enable Editing'.

Please insert items from 12th row.

Every row will be considered as a distinct item.

The row, in which the two fields- 'Item Code' and 'Description' are blank, will not be considered.

If 'CREDIT ITEM' is not entered, default value '0' will be taken.

If 'Calc Field' is not entered, default value 'N' will be taken.

MAX ITEM LIMIT IN EACH EXCEL FILE IS 1000

Abstract Estimate for S/R, MOW for Residential and non residential building under sub div-Sarangarh div- Sarangarh (CG)

PAC AMOUNT RS. 39.90 LAKHS

SL. No. Department SOR Year Item Code Description UOM Rate Quantity Amount Ref Serial No CREDIT ITEM (0/1) Calc Field(Y/N)

1 PWD PWD BLD 2015 1.1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. In all types of soils. Cum 185.00 12.00 2220.00 0 0 N

2 PWD PWD BLD 2015 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. Cum 371.00 35.00 12985.00 0 0 N

3 PWD PWD BLD 2015 2.1.1 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. sqm 139.00 72.50 10078.00 0 0 N

4 PWD PWD BLD 2015 2.1.13 Weather shade, chhajja, Cornices and mouldings sqm 294.00 7.50 2205.00 0 0 N

5 PWD PWD BLD 2015 2.1.6 Columns, beams & walls- circular or any other geometrical shape other than square and rectangular in all sizes sqm 356.00 20.00 7120.00 0 0 N

6 PWD PWD BLD 2015 2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) sqm 235.00 7.50 1763.00 0 0 N

7 PWD PWD BLD 2015 2.1.8 Beams, lintels, cantilevers & walls sqm 202.00 7.50 1515.00 0 0 N

8 PWD PWD BLD 2015 3.1.3 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). cum 2970.00 47.50 141075.00 0 0 N

9 PWD PWD BLD 2015 3.1.4 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size). cum 3552.00 43.00 152736.00 0 0 N

10 PWD PWD BLD 2015 3.2.1 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). cum 4163.00 40.00 166520.00 0 0 N

11 PWD PWD BLD 2015 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: cum 97.50 15.00 1463.00 0 0 N

12 PWD PWD BLD 2015 3.12.1 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire all complete: (Thermo-Mechanically treated bars FE 415) kg 54.50 1800.00 98100.00 0 0 N

13 PWD PWD BLD 2015 3.13 Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including form.work. Cum 4237.00 3.75 15889.00 0 0 N

14 PWD PWD BLD 2015 4.21 Providing post water proofing treatment against dampness & Seepage in roof, terraces, sunken floor of toilets with reinforced acrylic breathable (polymer content 35%, elongation at break at > 100%) coating consisting of following operations: (i) Removing loose material and cleaning the surface. (ii) Priming in one coat with water based acrylic emulsion (iii) Three coats with reinforced acrylic breathable polymer.. Sqm 611.00 500.00 305500.00 0 0 N

15 PWD PWD BLD 2015 7.5.4 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) cum 3263.00 40.00 130520.00 0 0 N

16 PWD PWD BLD 2015 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: cum 121.00 15.00 1815.00 0 0 N

17 PWD PWD BLD 2015 7.10.2 Half brick thick brick masonry with modular well-burnt clay bricks of crushing strength not less than 25 kg/sqcm and water absorption not more than 20% upto plinth level: Cement Mortar 1:4 (1 cement : 4 coarse sand) sqm 417.00 32.50 13553.00 0 0 N

18 PWD PWD BLD 2015 8.12.2 Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges(35 mm. thick single leaf) Sqm 2,005.00 95.00 190475.00 0 0 N

19 PWD PWD BLD 2015 8.13.3 Providing and fixing flush door shutters, conforming to IS 2202 (Part 1), interior grade, commercial type, core of block board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains, cross bands and face veneers on both faces of shutters excluding hinges. 30 mm. thick (single leaf) sqm 1197.00 40.00 47880.00 0 0 N

20 PWD PWD BLD 2015 8.15 Extra for double leaf shutter instead of single leaf. Sqm 52.00 7.50 390.00 0 0 N

21 PWD PWD BLD 2015 8.153 Providing and fixing 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 thick FRP laminate for panels confirming to IS: 14856 - 2000, complete Sqm 2,112.00 40.00 84480.00 0 0 N

22 PWD PWD BLD 2015 8.16.1 Providing and fixing PVC membrane foil coated (laminated) flush door shutters, made with core of block board with frame of first class hard wood, coated with 0.30mm membrane pasted with resin using vacuam treatment process complete all but excluding hinges. 35 mm thick (single leaf) sqm 1982.00 11.25 22298.00 0 0 N

23 PWD PWD BLD 2015 8.23.2 Providing and fixing 35mm thick wire gauge shutter having top and style rail 95mm width, bottom and lock rail 197mm width, using galvanized M.S. wire dia of 0.45 mm for doors, windows, clerestory windows excluding hinges.( Bijasal, Haldu, Benteak, Khair) Sqm 1,888.00 7.50 14160.00 0 0 N

24 PWD PWD BLD 2015 8.25 Extra for providing fixing galvanized M.S. wire dia of 0.60 mm instead of wire dia 0.45mm to doors, windows and clerestory.windows. Sqm 18.00 42.50 765.00 0 0 N

25 PWD PWD BLD 2015 8.33.2 Providing and fixing teak wood jamb lining with necessary screws, priming coat on exposed surfaces etc complete. (only jamb lining area is to be measured) 25 mm thick sqm 3962.00 1.50 5943.00 0 0 N

26 PWD PWD BLD 2015 8.36.1 Providing and fixing commercial grade water proof ply for wall paneling on wooden frame with necessary nails complete as required. (19 mm) sqm 1231.00 7.50 9233.00 0 0 N

27 PWD PWD BLD 2015 8.37 Providing and fixing approved shade veneering on wood wall paneling complete as required. sqm 705.00 3.00 2115.00 0 0 N

28 PWD PWD BLD 2015 8.53 Providing and fixing expanded metal 20x60 mm stands 3.25 mm wide and .60mm thick to window including 62x19mm beading to teak wood including priming coat of red oxide zinc chromate primer. sqm 929.00 25.00 23225.00 0 0 N

29 PWD PWD BLD 2015 8.55 Providing and fixing and galvanized wire mesh of I.S. gauge designation 85 G. with wires 0.56 mm dia to windows and clerestory windows including 19x12mm teak wood beading including priming coat of red oxide zinc chromate primer. sqm 443.00 35.00 15505.00 0 0 N

30 PWD PWD BLD 2015 8.60.1 Providing and fixing bright finished brass sliding door bolt with nuts and brass polished MS screws complete: 300x16mm Each 475.00 20 9500.00 0 0 N

31 PWD PWD BLD 2015 8.61.2 Providing and fixing brass door latch with brass polished MS screws complete:250x16x5 mm Each 268.00 20 5360.00 0 0 N

32 PWD PWD BLD 2015 8.62.1 Providing and fixing bright finished brass tower bolts (barrel type) with brass polished MS screws complete: 250x10mm Each 276.00 20 5520.00 0 0 N

33 PWD PWD BLD 2015 8.65.1 Providing and fixing bright finished brass door handles with brass polished MS screws complete: 125 mm Each 55.50 20 1110.00 0 0 N

34 PWD PWD BLD 2015 8.94.2 Providing and fixing M.S. bright finished or black enameled Butt hinges IS : 1341 marked with necessary iron screws: 100x58x1.90 mm each 20.50 85 1743.00 0 0 N

35 PWD PWD BLD 2015 8.99.1 Providing and fixing M.S. bright finished or black enameled sliding door bolts with bolts, nuts and necessary iron screws: 300x16mm each 77.50 85 6588.00 0 0 N

36 PWD PWD BLD 2015 8.102.3 Providing and fixing M.S. bright finished or black enameled Tower bolts (Barrel type) with necessary iron screws: 150 mm each 23.00 85 1955.00 0 0 N

37 PWD PWD BLD 2015 8.103.1 Providing and fixing M.S. bright finished or black enameled handles with necessary iron screws: 125 mm each 51.00 85 4335.00 0 0 N

38 PWD PWD BLD 2015 8.127.2 Providing and fixing powder coated aluminium door latch with 12mm rod, necessary M.S. nuts bolts and screws etc complete.(250x12mm) Each 54.50 85 4633.00 0 0 N

39 PWD PWD BLD 2015 8.128.3 Providing and fixing powder coated aluminium tower bolts (Barrel type) with necessary M.S. screws etc complete.(150 x10mm) Each 46.50 85 3953.00 0 0 N

40 PWD PWD BLD 2015 8.129.2 Providing and fixing powder coated aluminium door handles 2.5mm thick with necessary M.S. screws etc complete.(125 mm) Each 27.50 85 2338.00 0 0 N

41 PWD PWD BLD 2015 8.150 Providing and fixing factory made 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mm X 25mm or less as per requirement with an average wall thickness of 1mm ± 0.3mm. PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. An M.S. tube having dimensions 19mm x 19mm is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25mm X 11mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufactures' specification. sqm 2583.00 25.50 65867.00 0 0 N

42 PWD PWD BLD 2015 8.151 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge . metre 346.00 80.00 27680.00 0 0 N

43 PWD PWD BLD 2015 8.158 Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc complete. each 1450.00 8 10875.00 0 0 N

44 PWD PWD BLD 2015 9.1 Providing and fixing Structural steel work in single section including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. kg 61.50 400.00 24600.00 0 0 N

45 PWD PWD BLD 2015 9.3.1 Providing and fixing Steel work in tubular (round, square or rectangular hollow tubes etc.) structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer. Electric resistance or induction butt welded tubes Grade-250 kg 88.50 635.00 56198.00 0 0 N

46 PWD PWD BLD 2015 9.11 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys complete with bolts, nuts, locking arrangement stoppers, handles including applying a priming coat of red oxide zinc chromate primer. sqm 3330.00 6.75 22478.00 0 0 N

47 PWD PWD BLD 2015 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer. Kg 75.00 140.00 10500.00 0 0 N

48 PWD PWD BLD 2015 9.15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. kg 67.50 390.00 26325.00 0 0 N

49 PWD PWD BLD 2015 9.16.2 Providing and fixing M.S. frames of doors, windows, ventilators and cupboards joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.( Angle-iron frames ) kg 73.50 95.00 6983.00 0 0 N

50 PWD PWD BLD 2015 9.17 Providing and fixing factory made ISI marks steel doors, windows and ventilators side/ top/ centre hung made up of standard rolled steel section conforming to IS 1038:1968 (viz. F7D, F4B, K11 and K12B etc.), joints mitred and flash butt and sash bars tenoned and riveted/ welded with 10 cm long lugs of size 15x3mm embedded in cement concrete block 15x10x10 cms of 1:3:6 (1 cement :3 Coarse sand: 6 graded stone aggregate 20 mm nominal size) or rawl plugs and screws or with bolts and nuts as required including providing and fixing of hinges, pivots, handles, pegs, stays, rolling devices, locking arrangements, spring catch etc., as required complete including applying a priming coat of red oxide zinc chromateprimer. Kg 88.00 245.00 21560.00 0 0 N

51 PWD PWD BLD 2015 9.23.2 Providing and fixing frosted glass panes with steel glazing clips and special metal sash putty of approved make in steel doors, windows, ventilators:(5 mm thick) Sqm 717.00 47.50 34058.00 0 0 N

52 PWD PWD BLD 2015 9.34 Providing and fixing stainless wire gauge of average width of aperture 1.56mm with wire of 0.35mm to existing steel door, window shutter frames with necessary M.S. strip beading etc. complete . sqm 791.00 47.50 37573.00 0 0 N

53 PWD PWD BLD 2015 9.44 Providing and fixing “NETLON insect screens” with 25mm wide Hook and loop tape all around to wooden/ aluminium/ steel windows, ventilators and the like complete. . sqm 278.00 19.00 5282.00 0 0 N

54 PWD PWD BLD 2015 9.47.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately: For fixed portion kg 331.00 47.50 15723.00 0 0 N

55 PWD PWD BLD 2015 9.47.2 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/neoprene gasket required (Fittings shall be paid for separately). Kg 338.00 120.00 40560.00 0 0 N

56 PWD PWD BLD 2015 9.49 Extra for polyester powder coated (minimum 50 micron) aluminium sections instead of anodized . Kg 34.50 137.50 4744.00 0 0 N

57 PWD PWD BLD 2015 9.50.1 Providing and fixing 12mm thick pre-laminated particle board flat pressed with decorative lamination and balancing lamination on specified sides exterior Grade – I MDF Board 12 mm thick confirming to IS:14587, including fixed in aluminium doors, windows shutters and partition frames with C.P. brass/ stainless steel screws etc. complete. 34.50With decorative lamination on one side and balancing lamination on other side. Sqm 845.00 22.50 19013.00 0 0 N

58 PWD PWD BLD 2015 9.51.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness sqm 708.00 22.50 15930.00 0 0 N

59 PWD PWD BLD 2015 9.56 Providing and fixing of floor spring IS: marked (Everite, Door link or any equivalent make) with stainless steel cover plate each 1920.00 8 14400.00 0 0 N

60 PWD PWD BLD 2015 9.57.2 Providing stainless steel railing/ grill made of S.S. flats, hollow S.S. pipe or square/ rectangular sections of approved design fixing in stair case, balcony or other places with metal fasteners and stainless steel bolts etc complete..(SS Grade 304) Kg 525.00 55.00 28875.00 0 0 N

61 PWD PWD BLD 2015 9.59.2 Extra for providing and fixing reflective glass panes in aluminium door, window, ventilator shutters and partitions instead of float glass. (5 mm thickness) Sqm 292.00 47.50 13870.00 0 0 N

62 PWD PWD BLD 2015 9.61.1 Providing and fixing aluminium composite panels in approved panel sizes, thickness and shape on aluminium frame work on face of building. (Frame to be paid separately): 3 MM thick Sqm 1,283.00 5.25 6736.00 0 0 N

63 PWD PWD BLD 2015 10.5.3 Providing ridges or hips of 60cm overall width in plain G.I. sheet fixed with galvanized washers J or L hooks, bolts and nuts 8mm G.I. limpet and bitumen washers complete. 0.63 mm thick sheet with zinc coating not less than 275gm/sqm metre 445.00 42.50 18913.00 0 0 N

64 PWD PWD BLD 2015 10.11 Supply and fixing of precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Sqm 636.00 132.50 84270.00 0 0 N

65 PWD PWD BLD 2015 10.17 Providing asbestos cement 6mm thick corrugated or semi corrugated sheets roofing fixed with galvanized J or L hooks, bolts and nuts 8mm dia G.I. plain bitumen washers complete excluding the cost of purlins, rafters and trusses. sqm 347.00 15.00 5205.00 0 0 N

66 PWD PWD BLD 2015 10.46 Providing and laying Manglore pattern tiles 20 mm thick (without hip or ridge tiles) on steel/ wooden frame (frame work to be paid separately) sqm 592.00 7.50 4440.00 0 0 N

67 PWD PWD BLD 2015 10.47 Providing and laying Manglore pattern hips and ridge tiles fixed in cement mortar 1:6 etc. complete metre 130.00 7.50 975.00 0 0 N

68 PWD PWD BLD 2015 10.50 Providing and fixing 100 mm diameter and 60 cm long stone ware rain water spout in cement mortar 1:4 (1 cement : 4 fine sand) each 61.50 7.50 461.00 0 0 N

69 PWD PWD BLD 2015 10.54 Extra for sunk or raised mouldings in the Gypsum board/ plaster of paris false ceiling. Sqm 185.00 25.00 4625.00 0 0 N

70 PWD PWD BLD 2015 10.61 Providing and fixing at all height false ceiling consisting of frame work "W"/ "U" / "L" sections made of G.I. sheet with zinc coating of grade 120 consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.55mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed including providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part-I all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting. Sqm 658.00 25 16450.00 0 0 N

71 PWD PWD BLD 2015 11.1.2 Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand) sqm 87.00 95.00 8265.00 0 0 N

72 PWD PWD BLD 2015 11.2.3 Providing and making 12mm thick cement plaster of mix { In Cement Mortar 1:5 (1 cement : 5 fine sand)} Sqm 96.50 415.00 40048.00 0 0 N

73 PWD PWD BLD 2015 11.2.4 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) sqm 91.50 415.00 37973.00 0 0 N

74 PWD PWD BLD 2015 11.3.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:{ In Cement Mortar 1:5 (1 cement : 5 fine sand)} Sqm 113.00 255.00 28815.00 0 0 N

75 PWD PWD BLD 2015 11.3.4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) sqm 107.00 180.00 19260.00 0 0 N

76 PWD PWD BLD 2015 11.9 Extra for providing and mixing water proofing materials in cement plaster work in proportion as recommended by manufacturer. kg 43.50 95.00 4133.00 0 0 N

77 PWD PWD BLD 2015 11.10 Providing and mixing in cement mortar, triangular polyester fiber Recron 3s (Anti-shrinkage Admixture) of 6 mm length of approved make like Reliance industries Ltd etc. in proportion as recommended by manufacturer. kg 366.00 7.50 2745.00 0 0 N

78 PWD PWD BLD 2015 11.41 Providing and fixing chicken mesh weighting not less than 250 gms/ sqm as per IS : specification in the required width with 40mm long steel nails on vertical and horizontal surface near R.C.C. and brick walls junctions including scaffolding and all lead and lifts etc. complete before plastering upto 10mts in height. sqm 86.00 42.50 3655.00 0 0 N

79 PWD PWD BLD 2015 12.3.2 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50 mm thick sqm 254.00 60.00 15240.00 0 0 N

80 PWD PWD BLD 2015 12.7.2 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete. sqm 646.00 95.00 61370.00 0 0 N

81 PWD PWD BLD 2015 12.9.2 Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete. Size above 300x300mm sqm 728.00 95.00 69160.00 0 0 N

82 PWD PWD BLD 2015 12.76.1 Providing and laying Glazed Vitrified fioor tiles (GVT/ PGVT ) with digital print of random design with water absorption less than 0.05% and conforming to IS: I 5622-2017 of 1st quality of approved make in all colours, shades and size mentioned below (+/- 1Omm), laid on 20mm thick cement mortar 1:4 (l cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size 600x600mm thickness 9 to l0mm sqm 964.00 95.00 91580.00 0 0 N

83 PWD PWD BLD 2015 12.15 Deduct for not using 20mm thick cement mortar 1:4 (1 cement : 4coarse sand) bedding in laying of floor tiles. sqm 240.00 55.00 13200.00 0 0 N

84 PWD PWD BLD 2015 12.38.5 15mm thick Marble stone slab flooring over 18mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including grinding rubbing and polishing etc. complete. (Area of slab should be 0.50 sqm and above) Udaipur green marble sqm 1497.00 7.50 11228.00 0 0 N

85 PWD PWD BLD 2015 12.45.1 15 mm thick Table rubbed polished Granite stone slab flooring laid over 20mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing etc. complete. (Area of slab should be 0.50 sqm and above) Granite stone grey/pink sqm 1796.00 7.50 13470.00 0 0 N

86 PWD PWD BLD 2015 12.45.3 15 mm thick Table rubbed polished Granite stone slab flooring laid over 20mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing etc. complete. (Area of slab should be 0.50 sqm and above) Granite stone lakha red/ shahi red Sqm 4200.00 4.50 18900.00 0 0 N

87 PWD PWD BLD 2015 12.46.3 15 mm thick Table rubbed polished Granite stone slab in risers and treads of steps skirting dado and pillars laid on 12mm (Average) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry including rubbing and polishing etc. complete (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 m). Granite stone lakha red/ shahi red Sqm 4273.00 3.00 12819.00 0 0 N

88 PWD PWD BLD 2015 12.49 25 mm thick KOTA stone slab flooring over 20mm (Average) thick base of cement mortar 1:4 laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding rubbing and polishing etc. complete (Area of slab to be over 0.20 sqm and upto 0.50 sqm) sqm 897.00 25.00 22425.00 0 0 N

89 PWD PWD BLD 2015 12.50 KOTA stone slab 25mm thick in risers and treads of steps, skirting dado and pillar laid in 12mm (Average) thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. (single stone is to be used for riser and treads of steps and the width of stone for skirting and dado shall be equal to the height of skirting/ dado up to length of 1.0 M.) sqm 990.00 14.50 14355.00 0 0 N

90 PWD PWD BLD 2015 12.55 Extra for necessary grinding and polishing to get mirror finish on KOTA/ Marble Stone flooring/ steps/ treads instead of normal grinding and polishing. Sqm 263.00 57.50 15123.00 0 0 N

91 PWD PWD BLD 2015 12.56 25mm thick Local RAJIM/ Red Flag stone slab flooring laid over 20mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid over & jointed with grey cement slurry mixed with pigments to match the shade of the stone i/c grinding, rubbing and polishing. sqm 516.00 42.40 21878.00 0 0 N

92 PWD PWD BLD 2015 12.65.2 Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cm Pigment Coloured (rubber mould) precast interlock concrete blocks sqm 632.00 53.50 33812.00 0 0 N

93 PWD PWD BLD 2015 13.6.2 15mm thick Granite work (machine cut, table rubbed & mirror polished) for kitchen platform, vanity counters, window sills and similar locations of required size laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) including joints treated with white cement mixed with matching pigment including rubbing and polishing to edge moulding to give high gloss finish. (Granite black stone ) sqm 3279.00 4.50 14756.00 0 0 N

94 PWD PWD BLD 2015 14.9.1 Distempering with acrylic washable distemper to give an even shade. On new work (Two or more coats) sqm 38.00 180.00 6840.00 0 0 N

95 PWD PWD BLD 2015 14.9.2 On old work (one or more coats) sqm 17.50 395.00 6913.00 0 0 N

96 PWD PWD BLD 2015 14.11.2 Wall painting with acrylic luxury emulsion (plastic) paint of required shade to give an even shade. On old work (one or more coats) sqm 33.50 320.00 10720.00 0 0 N

97 PWD PWD BLD 2015 14.13 Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even. sqm 94.50 95.00 8978.00 0 0 N

98 PWD PWD BLD 2015 14.14.1 Finishing walls with water proofing cement paint of required shade to give an even shade. On new work (Two or more coats applied @ 3.84 kg/10 sqm) sqm 41.00 180.00 7380.00 0 0 N

99 PWD PWD BLD 2015 14.14.2 On old work (one or more coats applied @ 2.20 kg/10 sqm) sqm 25.50 500.00 12750.00 0 0 N

100 PWD PWD BLD 2015 14.16.1 Painting exterior surface with PREMIUM ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with: On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) sqm 74.50 132.50 9871.00 0 0 N

101 PWD PWD BLD 2015 14.16.2 On old work (One or more coats applied @ 0.83 ltr/ 10 sqm) sqm 47.50 sqm 47.50 197.50 9381.00 0 0 N

102 PWD PWD BLD 2015 14.22.2 Painting on new work (two or more coats) to give an even shade with: Premium synthetic enamel paint sqm 47.00 180.00 8460.00 0 0 N

103 PWD PWD BLD 2015 14.25 Providing and laying french sprit polish on new wood work after preparing the surface by rubbing down smooth with sand papers, covering the knots, if visible, applying a coat of wood filler, cleaning the surface, applying 50 or more coats of french spirit polish till the surface gives high gloss. Sqm 143.00 47.50 6793.00 0 0 N

104 PWD PWD BLD 2015 14.45 Removing dry or oil bound distemper by scraping sand papering and preparing the surfaces smooth including necessary repair to scratches etc. complete. sqm 5.20 180.00 936.00 0 0 N

105 PWD PWD BLD 2015 14.46 Removing old paint or polish by paint remover or blow lamp or any other means as approved including preparing the surface smooth after removing the paint. sqm 32.50 132.50 4306.00 0 0 N

106 PWD PWD BLD 2015 16.1 Dismantling rammed moorum and boulders or rammed moorum and silt in foundation or under floor including all lead and lifts. cum 279.00 7.50 2093.00 0 0 N

107 PWD PWD BLD 2015 16.3.3 Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead. In cement mortar. cum 263.00 7.50 1973.00 0 0 N

108 PWD PWD BLD 2015 16.10 Dismantling cement asbestos or other hard board ceiling or partition wall including stacking of serviceable material and disposal of unserviceable material within 50m lead. sqm 13.50 132.50 1789.00 0 0 N

109 PWD PWD BLD 2015 16.11 Dismantling single Allahabad tiles or Manglore tiles or single wheel tiles including roof timber (excluding trusses), including stacking of serviceable material and disposal of unserviceable material within 50m lead. sqm 44.00 95.00 4180.00 0 0 N

110 PWD PWD BLD 2015 16.12 Dismantling single Allahabad tiles or Manglore tiles or single wheel tiles excluding roof timber, including stacking of serviceable material and disposal of unserviceable material within 50m lead. sqm 27.50 253.50 6971.00 0 0 N

111 PWD PWD BLD 2015 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. each 100.00 95 9500.00 0 0 N

112 PWD PWD BLD 2015 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. each 66.50 95 6318.00 0 0 N

113 PWD PWD BLD 2015 16.28 Taking out door shutters (steel or wood) including stacking within 50 metres lead. each 46.50 95 4418.00 0 0 N

114 PWD PWD BLD 2015 16.29 Taking out window shutters (steel or wood) including stacking within 50 metres lead. each 33.50 95 3183.00 0 0 N

115 PWD PWD BLD 2015 16.36 Dismantling terrazzo or mosaic or glazed vitreous or patent cement or tiled flooring or dado skirting of any thickness without sub base. sqm 22.50 255.00 5738.00 0 0 N

116 PWD PWD BLD 2015 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. sqm 11.00 395.00 4345.00 0 0 N

117 PWD PWD BLD 2015 16.40 Dismantling expanded metal or welded fabrics with battens and beading including stacking the serviceable material within 50 metres lead. sqm 15.50 25.00 388.00 0 0 N

118 PWD PWD BLD 2015 16.42 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material within 50 metre lead. cum 768.00 7.50 5760.00 0 0 N

119 PWD PWD BLD 2015 16.43.2 Demolishing cement concrete including disposal of material within 50 metre lead. 1:3:6 or richer mix cum 549.00 11.25 6176.00 0 0 N

120 PWD PWD BLD 2015 16.53.1 Removing following vitreous china sanitorywares carefully for re-use including stacking within 50 metres lead. (Wash basin of all sizes and shapes) each 30.50 95 2898.00 0 0 N

121 PWD PWD BLD 2015 16.53.2 Urinals of all sizes and shapes each 38.00 15 570.00 0 0 N

122 PWD PWD BLD 2015 16.53.3 European/ Anglo/ Indian WC pan of all sizes each 46.00 55 2530.00 0 0 N

123 PWD PWD BLD 2015 16.53.3 PVC Cistern each 23.00 95 2185.00 0 0 N

124 PWD PWD BLD 2015 17.1.1 Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of rubbish to the dumping ground within 50metres lead : Thickness upto 15mm sqm 132.00 170.00 22440.00 0 0 N

125 PWD PWD BLD 2015 17.2.1 Providing and replacing broken floor tile with ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including removing the broken tile and mortar, pointing the joints with white cement mixed with matching pigment etc., complete. Size 300x300mm sqm 1151.00 22.50 25898.00 0 0 N

126 PWD PWD BLD 2015 17.2.2 Size above 300x300mm sqm 1187.00 25.00 29675.00 0 0 N

127 PWD PWD BLD 2015 17.9.1 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts embedding hold fasts in cement concrete blocks with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 metres lead : ( Door chowkhats) each 441.00 8 3308.00 0 0 N

128 PWD PWD BLD 2015 17.9.2 Window chowkhats each 317.00 8 2378.00 0 0 N

129 PWD PWD BLD 2015 17.9.3 Clerestory window chowkhats each 219.00 8 1643.00 0 0 N

130 PWD PWD BLD 2015 17.10 Fixing chowkhat in existing opening in brick / RCC wall with dash fasteners/ chemical fastener of appropriate size (3nos on each vertical member of door chowkhat and 2 nos. on each vertical member of window chowkhats including cost of dash fasteners/ chemical fastener. each 94.00 8 705.00 0 0 N

131 PWD PWD BLD 2015 17.12.1 Renewing glass panes, with putty and nails wherever necessary: (Float glass panes of thickness 4 mm) sqm 524.00 57.50 30130.00 0 0 N

132 PWD PWD BLD 2015 17.13.2 Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of thickness 5.5 mm sqm 765.00 11.25 8606.00 0 0 N

133 PWD PWD BLD 2015 17.19 Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab including cutting chase and making good and painting exposed portion of the clamps complete. each 144.00 43 6192.00 0 0 N

134 PWD PWD BLD 2015 17.21 Renewing Bijasal wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : cum 60050.00 0.15 9008.00 0 0 N

135 PWD PWD BLD 2015 17.22 Renewing Bijasal wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : Not exceeding 4.00 metres in length. cum 60901.00 0.15 9135.00 0 0 N

136 PWD PWD BLD 2015 17.23 Renewing aluminium door/ window by replacing demaged member by anodised/ powder coated aluminium sections of same diamentions complete including depositng dismentalled section at departmental.store. Kg 354.00 65.00 23010.00 0 0 N

137 PWD PWD BLD 2015 17.25.1 Providing and replacing broken/ damaged false ceiling tiles with new ceiling tiles on existing frame work.( 12mm thick unveneered Nova teak or equivalent super plain tiles) Sqm 604.00 42.50 25670.00 0 0 N

138 PWD PWD BLD 2015 17.25.3 Providing and replacing broken/ damaged false ceiling tiles with new ceiling tiles on existing frame work.( 12 mm thick half random perorated tiles Perforated area 13%) Sqm 583.00 42.50 24778.00 0 0 N

139 PWD PWD BLD 2015 18.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Long pattern W.C. pan of size 580 mm each 2459.00 8 18443.00 0 0 N

140 PWD PWD BLD 2015 18.2.1 Providing and fixing vitreous china water closet squatting pan (Indian type) including cutting and making good the walls and floors wherever required: White Long pattern W.C. pan of size 580 mm each 999.00 15 14985.00 0 0 N

141 PWD PWD BLD 2015 18.4.1 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all: fittings and fixtures complete including cutting and making good the walls and floors wherever required : White pedestal type each 2882.00 8 21615.00 0 0 N

142 PWD PWD BLD 2015 18.6.1 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan including cutting and making good the walls and floors wherever required: White pedestal type each 1180.00 15 17700.00 0 0 N

143 PWD PWD BLD 2015 18.7.1 Providing and fixing 10 litre capacity P.V.C. low level flushing cistern conforming to IS : 7231, with all fittings and fixtures complete. White each 729.00 43 31347.00 0 0 N

144 PWD PWD BLD 2015 18.10.1 Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe with PTMT nuts and PVC bush of approved quality and colour: 30 CM length each 56.00 170 9520.00 0 0 N

145 PWD PWD BLD 2015 18.11.2 Providing and fixing 15 mm nominal bore C.P copper connection pipe with C.P brass nuts collar and PVC bush of approved quality: 45 CM length each 239.00 65 15535.00 0 0 N

146 PWD PWD BLD 2015 18.13.2 Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete: Flat back type urinal of size 460x380x250mm each 1529.00 8 12232.00 0 0 N

147 PWD PWD BLD 2015 18.14.2 Providing and fixing white vitreous china urinal basin as per IS : 2556 complete: Flat back type urinal of size 460x380x250mm each 872.00 6 5232.00 0 0 N

148 PWD PWD BLD 2015 18.15 Providing and fixing one piece construction white vitreous china squatting plate urinal with an integral rim longitudinal flushing pipe, standard size G.I. flush pipe for back and front flush, C.P. brass coupling complete including cutting and making good the walls and floors etc. wherever required : each 2014.00 7 14098.00 0 0 N

149 PWD PWD BLD 2015 18.16 Providing and fixing one piece construction white vitreous china squatting plate urinal with an integral rim longitudinal flushing pipe. each 1401.00 6 8406.00 0 0 N

150 PWD PWD BLD 2015 18.17.1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450 mm each 1430.00 35 50050.00 0 0 N

151 PWD PWD BLD 2015 18.17.4 White Angle back size 400x400 mm each 1174.00 3 3522.00 0 0 N

152 PWD PWD BLD 2015 18.20.2 Providing and fixing stainless steel AISI-304(18/8) wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :( Size 510x410 mm) Each 4095.00 2 6143.00 0 0 N

153 PWD PWD BLD 2015 18.23.2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of brackets, cutting and making good the wall wherever required : Size 600x450x200mm each 4502.00 2 6753.00 0 0 N

154 PWD PWD BLD 2015 18.25.1 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia each 68.50 135 9248.00 0 0 N

156 PWD PWD BLD 2015 18.27.1 Providing and fixing cast iron grating for gully trap. 100x100mm square or round each 30.00 48 1440.00 0 0 N

157 PWD PWD BLD 2015 18.30.1 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : (5mm thick mirror) Sqm 2016.00 3 6048.00 0 0 N

158 PWD PWD BLD 2015 18.32.1 Providing and fixing sand cast iron S&S pipe as per IS: 1729 for soil, waste and vent pipes: 100 mm dia. metre 783.00 7.50 5873.00 0 0 N

159 PWD PWD BLD 2015 18.33.1 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : For 100 mm dia pipe each 85.50 48 4104.00 0 0 N

160 PWD PWD BLD 2015 18.76.2 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. {110 mm dia pipe.} Meter 267.00 95.00 25365.00 0 0 N

161 PWD PWD BLD 2015 18.77.1.1 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. { Tee/ Tee with door/ Bend 45°/ Bend 90° } 75 mm Each 113.00 7.50 848.00 0 0 N

163 PWD PWD BLD 2015 18.77.3.2 Vent covel{ 110 mm} Each 44.00 150.00 6600.00 0 0 N

164 PWD PWD BLD 2015 18.77.6 Nahani trap 110x75mm Each 90.50 35.00 3168.00 0 0 N

165 PWD PWD BLD 2015 18.77.2.2 Double " Y " with or without door 110 mm each 224.00 45.00 10080.00 0 0 N

166 PWD PWD BLD 2015 18.77.5 "P" trap 110mmx110mm long each 227.00 45.00 10215.00 0 0 N

167 PWD PWD BLD 2015 18.77.8 Plain reducing Tee 110x75mm each 129.00 45.00 5805.00 0 0 N

168 PWD PWD BLD 2015 18.78.2 Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm each 61.00 60.00 3660.00 0 0 N

169 PWD PWD BLD 2015 19.4.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. INTERNAL WORK - EXPOSED ON WALL {40 mm nominal outer dia .Pipes.} metre 362.00 7.50 2715.00 0 0 N

170 PWD PWD BLD 2015 19.4.4 32 mm nominal outer dia .Pipes. metre 271.00 7.50 2033.00 0 0 N

171 PWD PWD BLD 2015 19.5.1 19.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. CONCEALED WORK including cutting chases and making good the walls etc., (15 mm nominal outer dia .Pipes.) metre 133.00 265.00 35245.00 0 0 N

172 PWD PWD BLD 2015 19.5.3 25 mm nominal outer dia .Pipes. metre 213.00 180.00 38340.00 0 0 N

173 PWD PWD BLD 2015 19.7.1 Providing and fixing on wall surface G.I. pipes medium class complete with G.I. fittings and clamps, including cutting, making good the walls etc. and testing of joints complete: (15 mm dia. nominal bore) metre 149.00 7.50 1118.00 0 0 N

174 PWD PWD BLD 2015 19.7.2 20 mm dia. nominal bore metre 185.00 7.50 1388.00 0 0 N

175 PWD PWD BLD 2015 19.7.3 25 mm dia. nominal bore metre 258.00 7.50 1935.00 0 0 N

176 PWD PWD BLD 2015 19.7.4 32 mm dia. nominal bore metre 318.00 7.50 2385.00 0 0 N

177 PWD PWD BLD 2015 19.8.1 Providing and fixing concealed in wall G.I. pipes medium class complete with G.I. fittings and clamps, including painting with anti corrosive bitumastic paint, cutting chases, making good the walls etc. and testing of joints complete: (15 mm dia nominal bore) metre 188.00 7.50 1410.00 0 0 N

178 PWD PWD BLD 2015 19.8.2 20 mm dia nominal bore metre 221.00 45.00 9945.00 0 0 N

179 PWD PWD BLD 2015 19.13.2. Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality: Bib cock (350 grams) Each 237.00 120 28440.00 0 0 N

180 PWD PWD BLD 2015 19.13.3 Stop cock (350 grams) Each 237.00 125 29625.00 0 0 N

181 PWD PWD BLD 2015 19.14.1 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Bib cock (400 grams) each 382.00 5 1719.00 0 0 N

182 PWD PWD BLD 2015 19.14.2 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: {Long nose bib cock (500 grams)} Each 455.00 3 1365.00 0 0 N

183 PWD PWD BLD 2015 19.14.5 Two way bib cock (800 grams) Each 708.00 38 26904.00 0 0 N

184 PWD PWD BLD 2015 19.14.8. Basin mixer pillar tap with spout (1000 grams) Each 1248.00 6 7488.00 0 0 N

185 PWD PWD BLD 2015 19.14.11 Hand shower set with flexible extension pipe Each 754.00 65 49010.00 0 0 N

186 PWD PWD BLD 2015 19.14.13 Toilet paper holder Each 248.00 55 13640.00 0 0 N

187 PWD PWD BLD 2015 19.14.14 Soap dish plate Each 163.00 65 10595.00 0 0 N

188 PWD PWD BLD 2015 19.14.15 Shower rose (revolving type) (150mm) Each 269.00 75 20175.00 0 0 N

189 PWD PWD BLD 2015 19.14.16 Towel rail (600mm long x 20mm dia) Each 338.00 60 20280.00 0 0 N

190 PWD PWD BLD 2015 19.14.17 Towel ring (150 mm dia) Each 254.00 65 16510.00 0 0 N

191 PWD PWD BLD 2015 19.15 Providing and fixing stainless steel drain jali of approved make/quality. each 51.00 135 6885.00 0 0 N

192 PWD PWD BLD 2015 19.16.1 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 25 mm nominal bore each 436.00 55 23980.00 0 0 N

193 PWD PWD BLD 2015 19.17.1 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore each 284.00 65 18460.00 0 0 N

194 PWD PWD BLD 2015 19.42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank litre 7.30 17000 124100.00 0 0 N

195 PWD PWD BLD 2015 19.47 Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design : each 754.00 6 4524.00 0 0 N

Sub Engineer Sub Divisional Officer Executive Engineer

Sarangarh PWD Sub Dn. Sarangarh PWD Raigarh Dn. Sarangarh

To enable entering data into the sheet, please click on 'Enable Editing'.

Please insert items from 12th row.

Every row will be considered as a distinct item.

The row, in which the two fields- 'Item Code' and 'Description' are blank, will not be considered.

If 'CREDIT ITEM' is not entered, default value '0' will be taken.

If 'Calc Field' is not entered, default value 'N' will be taken.

MAX ITEM LIMIT IN EACH EXCEL FILE IS 1000

Abstract Estimate for S/R, MOW for Residential and non residential building under sub div-Sarangarh div- Sarangarh (CG)

PAC AMOUNT RS. 55.00 LAKHS

SL. No. Department SOR Year Item Code Description UOM Rate Quantity Amount Ref Serial No CREDIT ITEM (0/1) Calc Field(Y/N)

1 PWD PWD BLD 2015 1.1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. In all types of soils. Cum 185.00 18.50 3423.00 0 0 N

2 PWD PWD BLD 2015 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. Cum 371.00 46.50 17252.00 0 0 N

3 PWD PWD BLD 2015 2.1.1 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. sqm 139.00 107.50 14943.00 0 0 N

4 PWD PWD BLD 2015 2.1.13 Weather shade, chhajja, Cornices and mouldings sqm 294.00 15.00 4410.00 0 0 N

5 PWD PWD BLD 2015 2.1.6 Columns, beams & walls- circular or any other geometrical shape other than square and rectangular in all sizes sqm 356.00 29.60 10538.00 0 0 N

6 PWD PWD BLD 2015 2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) sqm 235.00 15.00 3525.00 0 0 N

7 PWD PWD BLD 2015 2.1.8 Beams, lintels, cantilevers & walls sqm 202.00 15.00 3030.00 0 0 N

8 PWD PWD BLD 2015 3.1.3 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). cum 2970.00 59.74 177428.00 0 0 N

9 PWD PWD BLD 2015 3.1.4 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size). cum 3552.00 48.00 170496.00 0 0 N

10 PWD PWD BLD 2015 3.2.1 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). cum 4163.00 58.60 243952.00 0 0 N

11 PWD PWD BLD 2015 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: cum 97.50 33.60 3276.00 0 0 N

12 PWD PWD BLD 2015 3.12.1 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire all complete: (Thermo-Mechanically treated bars FE 415) kg 54.50 1980.00 107910.00 0 0 N

13 PWD PWD BLD 2015 3.13 Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including form.work. Cum 4237.00 4.25 18007.00 0 0 N

14 PWD PWD BLD 2015 4.21 Providing post water proofing treatment against dampness & Seepage in roof, terraces, sunken floor of toilets with reinforced acrylic breathable (polymer content 35%, elongation at break at > 100%) coating consisting of following operations: (i) Removing loose material and cleaning the surface. (ii) Priming in one coat with water based acrylic emulsion (iii) Three coats with reinforced acrylic breathable polymer.. Sqm 611.00 620.00 378820.00 0 0 N

15 PWD PWD BLD 2015 7.5.4 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) cum 3263.00 44.50 145204.00 0 0 N

16 PWD PWD BLD 2015 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: cum 121.00 19.50 2360.00 0 0 N

17 PWD PWD BLD 2015 7.10.2 Half brick thick brick masonry with modular well-burnt clay bricks of crushing strength not less than 25 kg/sqcm and water absorption not more than 20% upto plinth level: Cement Mortar 1:4 (1 cement : 4 coarse sand) sqm 417.00 38.70 16138.00 0 0 N

18 PWD PWD BLD 2015 8.12.2 Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges(35 mm. thick single leaf) Sqm 2,005.00 105.08 210685.00 0 0 N

19 PWD PWD BLD 2015 8.13.3 Providing and fixing flush door shutters, conforming to IS 2202 (Part 1), interior grade, commercial type, core of block board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains, cross bands and face veneers on both faces of shutters excluding hinges. 30 mm. thick (single leaf) sqm 1197.00 50.08 59946.00 0 0 N

20 PWD PWD BLD 2015 8.15 Extra for double leaf shutter instead of single leaf. Sqm 52.00 17.58 914.00 0 0 N

21 PWD PWD BLD 2015 8.153 Providing and fixing 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 thick FRP laminate for panels confirming to IS: 14856 - 2000, complete Sqm 2,112.00 42.10 88915.00 0 0 N

22 PWD PWD BLD 2015 8.16.1 Providing and fixing PVC membrane foil coated (laminated) flush door shutters, made with core of block board with frame of first class hard wood, coated with 0.30mm membrane pasted with resin using vacuam treatment process complete all but excluding hinges. 35 mm thick (single leaf) sqm 1982.00 16.29 32287.00 0 0 N

23 PWD PWD BLD 2015 8.23.2 Providing and fixing 35mm thick wire gauge shutter having top and style rail 95mm width, bottom and lock rail 197mm width, using galvanized M.S. wire dia of 0.45 mm for doors, windows, clerestory windows excluding hinges.( Bijasal, Haldu, Benteak, Khair) Sqm 1,888.00 12.54 23676.00 0 0 N

24 PWD PWD BLD 2015 8.25 Extra for providing fixing galvanized M.S. wire dia of 0.60 mm instead of wire dia 0.45mm to doors, windows and clerestory.windows. Sqm 18.00 47.54 856.00 0 0 N

25 PWD PWD BLD 2015 8.33.2 Providing and fixing teak wood jamb lining with necessary screws, priming coat on exposed surfaces etc complete. (only jamb lining area is to be measured) 25 mm thick sqm 3962.00 3.00 11886.00 0 0 N

26 PWD PWD BLD 2015 8.36.1 Providing and fixing commercial grade water proof ply for wall paneling on wooden frame with necessary nails complete as required. (19 mm) sqm 1231.00 15.00 18465.00 0 0 N

27 PWD PWD BLD 2015 8.37 Providing and fixing approved shade veneering on wood wall paneling complete as required. sqm 705.00 6.00 4230.00 0 0 N

28 PWD PWD BLD 2015 8.53 Providing and fixing expanded metal 20x60 mm stands 3.25 mm wide and .60mm thick to window including 62x19mm beading to teak wood including priming coat of red oxide zinc chromate primer. sqm 929.00 37.00 34373.00 0 0 N

29 PWD PWD BLD 2015 8.55 Providing and fixing and galvanized wire mesh of I.S. gauge designation 85 G. with wires 0.56 mm dia to windows and clerestory windows including 19x12mm teak wood beading including priming coat of red oxide zinc chromate primer. sqm 443.00 39.20 17366.00 0 0 N

30 PWD PWD BLD 2015 8.60.1 Providing and fixing bright finished brass sliding door bolt with nuts and brass polished MS screws complete: 300x16mm Each 475.00 28 13300.00 0 0 N

31 PWD PWD BLD 2015 8.61.2 Providing and fixing brass door latch with brass polished MS screws complete:250x16x5 mm Each 268.00 28 7504.00 0 0 N

32 PWD PWD BLD 2015 8.62.1 Providing and fixing bright finished brass tower bolts (barrel type) with brass polished MS screws complete: 250x10mm Each 276.00 28 7728.00 0 0 N

33 PWD PWD BLD 2015 8.65.1 Providing and fixing bright finished brass door handles with brass polished MS screws complete: 125 mm Each 55.50 28 1554.00 0 0 N

34 PWD PWD BLD 2015 8.94.2 Providing and fixing M.S. bright finished or black enameled Butt hinges IS : 1341 marked with necessary iron screws: 100x58x1.90 mm each 20.50 109 2235.00 0 0 N

35 PWD PWD BLD 2015 8.99.1 Providing and fixing M.S. bright finished or black enameled sliding door bolts with bolts, nuts and necessary iron screws: 300x16mm each 77.50 95 7363.00 0 0 N

36 PWD PWD BLD 2015 8.102.3 Providing and fixing M.S. bright finished or black enameled Tower bolts (Barrel type) with necessary iron screws: 150 mm each 23.00 95 2185.00 0 0 N

37 PWD PWD BLD 2015 8.103.1 Providing and fixing M.S. bright finished or black enameled handles with necessary iron screws: 125 mm each 51.00 95 4845.00 0 0 N

38 PWD PWD BLD 2015 8.127.2 Providing and fixing powder coated aluminium door latch with 12mm rod, necessary M.S. nuts bolts and screws etc complete.(250x12mm) Each 54.50 95 5178.00 0 0 N

39 PWD PWD BLD 2015 8.128.3 Providing and fixing powder coated aluminium tower bolts (Barrel type) with necessary M.S. screws etc complete.(150 x10mm) Each 46.50 95 4418.00 0 0 N

40 PWD PWD BLD 2015 8.129.2 Providing and fixing powder coated aluminium door handles 2.5mm thick with necessary M.S. screws etc complete.(125 mm) Each 27.50 95 2613.00 0 0 N

41 PWD PWD BLD 2015 8.150 Providing and fixing factory made 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mm X 25mm or less as per requirement with an average wall thickness of 1mm ± 0.3mm. PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. An M.S. tube having dimensions 19mm x 19mm is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25mm X 11mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufactures' specification. sqm 2583.00 51.00 131733.00 0 0 N

42 PWD PWD BLD 2015 8.151 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge . metre 346.00 130.00 44980.00 0 0 N

43 PWD PWD BLD 2015 8.158 Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc complete. each 1450.00 16 22475.00 0 0 N

44 PWD PWD BLD 2015 9.1 Providing and fixing Structural steel work in single section including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. kg 61.50 702.00 43173.00 0 0 N

45 PWD PWD BLD 2015 9.3.1 Providing and fixing Steel work in tubular (round, square or rectangular hollow tubes etc.) structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer. Electric resistance or induction butt welded tubes Grade-250 kg 88.50 815.00 72128.00 0 0 N

46 PWD PWD BLD 2015 9.11 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys complete with bolts, nuts, locking arrangement stoppers, handles including applying a priming coat of red oxide zinc chromate primer. sqm 3330.00 14.10 46953.00 0 0 N

47 PWD PWD BLD 2015 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer. Kg 75.00 280.00 21000.00 0 0 N

48 PWD PWD BLD 2015 9.15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. kg 67.50 630.00 42525.00 0 0 N

49 PWD PWD BLD 2015 9.16.2 Providing and fixing M.S. frames of doors, windows, ventilators and cupboards joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.( Angle-iron frames ) kg 73.50 175.00 12863.00 0 0 N

50 PWD PWD BLD 2015 9.17 Providing and fixing factory made ISI marks steel doors, windows and ventilators side/ top/ centre hung made up of standard rolled steel section conforming to IS 1038:1968 (viz. F7D, F4B, K11 and K12B etc.), joints mitred and flash butt and sash bars tenoned and riveted/ welded with 10 cm long lugs of size 15x3mm embedded in cement concrete block 15x10x10 cms of 1:3:6 (1 cement :3 Coarse sand: 6 graded stone aggregate 20 mm nominal size) or rawl plugs and screws or with bolts and nuts as required including providing and fixing of hinges, pivots, handles, pegs, stays, rolling devices, locking arrangements, spring catch etc., as required complete including applying a priming coat of red oxide zinc chromateprimer. Kg 88.00 445.00 39160.00 0 0 N

51 PWD PWD BLD 2015 9.23.2 Providing and fixing frosted glass panes with steel glazing clips and special metal sash putty of approved make in steel doors, windows, ventilators:(5 mm thick) Sqm 717.00 65.50 46964.00 0 0 N

52 PWD PWD BLD 2015 9.34 Providing and fixing stainless wire gauge of average width of aperture 1.56mm with wire of 0.35mm to existing steel door, window shutter frames with necessary M.S. strip beading etc. complete . sqm 791.00 65.50 51811.00 0 0 N

53 PWD PWD BLD 2015 9.44 Providing and fixing “NETLON insect screens” with 25mm wide Hook and loop tape all around to wooden/ aluminium/ steel windows, ventilators and the like complete. . sqm 278.00 38.00 10564.00 0 0 N

54 PWD PWD BLD 2015 9.47.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately: For fixed portion kg 331.00 95.00 31445.00 0 0 N

55 PWD PWD BLD 2015 9.47.2 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/neoprene gasket required (Fittings shall be paid for separately). Kg 338.00 240.00 81120.00 0 0 N

56 PWD PWD BLD 2015 9.49 Extra for polyester powder coated (minimum 50 micron) aluminium sections instead of anodized . Kg 34.50 275.00 9488.00 0 0 N

57 PWD PWD BLD 2015 9.50.1 Providing and fixing 12mm thick pre-laminated particle board flat pressed with decorative lamination and balancing lamination on specified sides exterior Grade – I MDF Board 12 mm thick confirming to IS:14587, including fixed in aluminium doors, windows shutters and partition frames with C.P. brass/ stainless steel screws etc. complete. 34.50With decorative lamination on one side and balancing lamination on other side. Sqm 845.00 45.00 38025.00 0 0 N

58 PWD PWD BLD 2015 9.51.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness sqm 708.00 34.50 24426.00 0 0 N

59 PWD PWD BLD 2015 9.56 Providing and fixing of floor spring IS: marked (Everite, Door link or any equivalent make) with stainless steel cover plate each 1920.00 15 28800.00 0 0 N

60 PWD PWD BLD 2015 9.57.2 Providing stainless steel railing/ grill made of S.S. flats, hollow S.S. pipe or square/ rectangular sections of approved design fixing in stair case, balcony or other places with metal fasteners and stainless steel bolts etc complete..(SS Grade 304) Kg 525.00 80.00 42000.00 0 0 N

61 PWD PWD BLD 2015 9.59.2 Extra for providing and fixing reflective glass panes in aluminium door, window, ventilator shutters and partitions instead of float glass. (5 mm thickness) Sqm 292.00 69.50 20294.00 0 0 N

62 PWD PWD BLD 2015 9.61.1 Providing and fixing aluminium composite panels in approved panel sizes, thickness and shape on aluminium frame work on face of building. (Frame to be paid separately): 3 MM thick Sqm 1,283.00 10.50 13472.00 0 0 N

63 PWD PWD BLD 2015 10.5.3 Providing ridges or hips of 60cm overall width in plain G.I. sheet fixed with galvanized washers J or L hooks, bolts and nuts 8mm G.I. limpet and bitumen washers complete. 0.63 mm thick sheet with zinc coating not less than 275gm/sqm metre 445.00 62.50 27813.00 0 0 N

64 PWD PWD BLD 2015 10.11 Supply and fixing of precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Sqm 636.00 240.50 152958.00 0 0 N

65 PWD PWD BLD 2015 10.17 Providing asbestos cement 6mm thick corrugated or semi corrugated sheets roofing fixed with galvanized J or L hooks, bolts and nuts 8mm dia G.I. plain bitumen washers complete excluding the cost of purlins, rafters and trusses. sqm 347.00 30.00 10410.00 0 0 N

66 PWD PWD BLD 2015 10.46 Providing and laying Manglore pattern tiles 20 mm thick (without hip or ridge tiles) on steel/ wooden frame (frame work to be paid separately) sqm 592.00 15.00 8880.00 0 0 N

67 PWD PWD BLD 2015 10.47 Providing and laying Manglore pattern hips and ridge tiles fixed in cement mortar 1:6 etc. complete metre 130.00 15.00 1950.00 0 0 N

68 PWD PWD BLD 2015 10.50 Providing and fixing 100 mm diameter and 60 cm long stone ware rain water spout in cement mortar 1:4 (1 cement : 4 fine sand) each 61.50 14.50 892.00 0 0 N

69 PWD PWD BLD 2015 10.54 Extra for sunk or raised mouldings in the Gypsum board/ plaster of paris false ceiling. Sqm 185.00 50.00 9250.00 0 0 N

70 PWD PWD BLD 2015 10.61 Providing and fixing at all height false ceiling consisting of frame work "W"/ "U" / "L" sections made of G.I. sheet with zinc coating of grade 120 consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.55mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed including providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part-I all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting. Sqm 658.00 50 32900.00 0 0 N

71 PWD PWD BLD 2015 11.1.2 Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand) sqm 87.00 190.00 16530.00 0 0 N

72 PWD PWD BLD 2015 11.2.3 Providing and making 12mm thick cement plaster of mix { In Cement Mortar 1:5 (1 cement : 5 fine sand)} Sqm 96.50 515.00 49698.00 0 0 N

73 PWD PWD BLD 2015 11.2.4 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) sqm 91.50 630.00 57645.00 0 0 N

74 PWD PWD BLD 2015 11.3.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:{ In Cement Mortar 1:5 (1 cement : 5 fine sand)} Sqm 113.00 315.00 35595.00 0 0 N

75 PWD PWD BLD 2015 11.3.4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) sqm 107.00 240.00 25680.00 0 0 N

76 PWD PWD BLD 2015 11.9 Extra for providing and mixing water proofing materials in cement plaster work in proportion as recommended by manufacturer. kg 43.50 190.00 8265.00 0 0 N

77 PWD PWD BLD 2015 11.10 Providing and mixing in cement mortar, triangular polyester fiber Recron 3s (Anti-shrinkage Admixture) of 6 mm length of approved make like Reliance industries Ltd etc. in proportion as recommended by manufacturer. kg 366.00 15.00 5490.00 0 0 N

78 PWD PWD BLD 2015 11.41 Providing and fixing chicken mesh weighting not less than 250 gms/ sqm as per IS : specification in the required width with 40mm long steel nails on vertical and horizontal surface near R.C.C. and brick walls junctions including scaffolding and all lead and lifts etc. complete before plastering upto 10mts in height. sqm 86.00 85.00 7310.00 0 0 N

79 PWD PWD BLD 2015 12.3.2 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50 mm thick sqm 254.00 120.00 30480.00 0 0 N

80 PWD PWD BLD 2015 12.7.2 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete. sqm 646.00 190.00 122740.00 0 0 N

81 PWD PWD BLD 2015 12.9.2 Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete. Size above 300x300mm sqm 728.00 111.00 80808.00 0 0 N

82 PWD PWD BLD 2015 12.76.1 Providing and laying Glazed Vitrified fioor tiles (GVT/ PGVT ) with digital print of random design with water absorption less than 0.05% and conforming to IS: I 5622-2017 of 1st quality of approved make in all colours, shades and size mentioned below (+/- 1Omm), laid on 20mm thick cement mortar 1:4 (l cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size 600x600mm thickness 9 to l0mm sqm 964.00 170.00 163880.00 0 0 N

83 PWD PWD BLD 2015 12.15 Deduct for not using 20mm thick cement mortar 1:4 (1 cement : 4coarse sand) bedding in laying of floor tiles. sqm 240.00 110.00 26400.00 0 0 N

84 PWD PWD BLD 2015 12.38.5 15mm thick Marble stone slab flooring over 18mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including grinding rubbing and polishing etc. complete. (Area of slab should be 0.50 sqm and above) Udaipur green marble sqm 1497.00 15.00 22455.00 0 0 N

85 PWD PWD BLD 2015 12.45.1 15 mm thick Table rubbed polished Granite stone slab flooring laid over 20mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing etc. complete. (Area of slab should be 0.50 sqm and above) Granite stone grey/pink sqm 1796.00 15.00 26940.00 0 0 N

86 PWD PWD BLD 2015 12.45.3 15 mm thick Table rubbed polished Granite stone slab flooring laid over 20mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing etc. complete. (Area of slab should be 0.50 sqm and above) Granite stone lakha red/ shahi red Sqm 4200.00 7.50 31500.00 0 0 N

87 PWD PWD BLD 2015 12.46.3 15 mm thick Table rubbed polished Granite stone slab in risers and treads of steps skirting dado and pillars laid on 12mm (Average) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry including rubbing and polishing etc. complete (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 m). Granite stone lakha red/ shahi red Sqm 4273.00 6.00 25638.00 0 0 N

88 PWD PWD BLD 2015 12.49 25 mm thick KOTA stone slab flooring over 20mm (Average) thick base of cement mortar 1:4 laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding rubbing and polishing etc. complete (Area of slab to be over 0.20 sqm and upto 0.50 sqm) sqm 897.00 37.50 33638.00 0 0 N

89 PWD PWD BLD 2015 12.50 KOTA stone slab 25mm thick in risers and treads of steps, skirting dado and pillar laid in 12mm (Average) thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. (single stone is to be used for riser and treads of steps and the width of stone for skirting and dado shall be equal to the height of skirting/ dado up to length of 1.0 M.) sqm 990.00 22.00 21780.00 0 0 N

90 PWD PWD BLD 2015 12.55 Extra for necessary grinding and polishing to get mirror finish on KOTA/ Marble Stone flooring/ steps/ treads instead of normal grinding and polishing. Sqm 263.00 65.00 17095.00 0 0 N

91 PWD PWD BLD 2015 12.56 25mm thick Local RAJIM/ Red Flag stone slab flooring laid over 20mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid over & jointed with grey cement slurry mixed with pigments to match the shade of the stone i/c grinding, rubbing and polishing. sqm 516.00 48.40 24974.00 0 0 N

92 PWD PWD BLD 2015 12.65.2 Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cm Pigment Coloured (rubber mould) precast interlock concrete blocks sqm 632.00 107.00 67624.00 0 0 N

93 PWD PWD BLD 2015 13.6.2 15mm thick Granite work (machine cut, table rubbed & mirror polished) for kitchen platform, vanity counters, window sills and similar locations of required size laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) including joints treated with white cement mixed with matching pigment including rubbing and polishing to edge moulding to give high gloss finish. (Granite black stone ) sqm 3279.00 9.00 29511.00 0 0 N

94 PWD PWD BLD 2015 14.9.1 Distempering with acrylic washable distemper to give an even shade. On new work (Two or more coats) sqm 38.00 180.00 6840.00 0 0 N

95 PWD PWD BLD 2015 14.9.2 On old work (one or more coats) sqm 17.50 395.00 6913.00 0 0 N

96 PWD PWD BLD 2015 14.11.2 Wall painting with acrylic luxury emulsion (plastic) paint of required shade to give an even shade. On old work (one or more coats) sqm 33.50 320.00 10720.00 0 0 N

97 PWD PWD BLD 2015 14.13 Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even. sqm 94.50 95.00 8978.00 0 0 N

98 PWD PWD BLD 2015 14.14.1 Finishing walls with water proofing cement paint of required shade to give an even shade. On new work (Two or more coats applied @ 3.84 kg/10 sqm) sqm 41.00 180.00 7380.00 0 0 N

99 PWD PWD BLD 2015 14.14.2 On old work (one or more coats applied @ 2.20 kg/10 sqm) sqm 25.50 500.00 12750.00 0 0 N

100 PWD PWD BLD 2015 14.16.1 Painting exterior surface with PREMIUM ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with: On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) sqm 74.50 132.50 9871.00 0 0 N

101 PWD PWD BLD 2015 14.16.2 On old work (One or more coats applied @ 0.83 ltr/ 10 sqm) sqm 47.50 sqm 47.50 197.50 9381.00 0 0 N

102 PWD PWD BLD 2015 14.22.2 Painting on new work (two or more coats) to give an even shade with: Premium synthetic enamel paint sqm 47.00 180.00 8460.00 0 0 N

103 PWD PWD BLD 2015 14.25 Providing and laying french sprit polish on new wood work after preparing the surface by rubbing down smooth with sand papers, covering the knots, if visible, applying a coat of wood filler, cleaning the surface, applying 50 or more coats of french spirit polish till the surface gives high gloss. Sqm 143.00 47.50 6793.00 0 0 N

104 PWD PWD BLD 2015 14.45 Removing dry or oil bound distemper by scraping sand papering and preparing the surfaces smooth including necessary repair to scratches etc. complete. sqm 5.20 180.00 936.00 0 0 N

105 PWD PWD BLD 2015 14.46 Removing old paint or polish by paint remover or blow lamp or any other means as approved including preparing the surface smooth after removing the paint. sqm 32.50 132.50 4306.00 0 0 N

106 PWD PWD BLD 2015 16.1 Dismantling rammed moorum and boulders or rammed moorum and silt in foundation or under floor including all lead and lifts. cum 279.00 11.50 3209.00 0 0 N

107 PWD PWD BLD 2015 16.3.3 Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead. In cement mortar. cum 263.00 11.50 3025.00 0 0 N

108 PWD PWD BLD 2015 16.10 Dismantling cement asbestos or other hard board ceiling or partition wall including stacking of serviceable material and disposal of unserviceable material within 50m lead. sqm 13.50 265.00 3578.00 0 0 N

109 PWD PWD BLD 2015 16.11 Dismantling single Allahabad tiles or Manglore tiles or single wheel tiles including roof timber (excluding trusses), including stacking of serviceable material and disposal of unserviceable material within 50m lead. sqm 44.00 100.00 4400.00 0 0 N

110 PWD PWD BLD 2015 16.12 Dismantling single Allahabad tiles or Manglore tiles or single wheel tiles excluding roof timber, including stacking of serviceable material and disposal of unserviceable material within 50m lead. sqm 27.50 258.50 7109.00 0 0 N

111 PWD PWD BLD 2015 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. each 100.00 101 10100.00 0 0 N

112 PWD PWD BLD 2015 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. each 66.50 107 7116.00 0 0 N

113 PWD PWD BLD 2015 16.28 Taking out door shutters (steel or wood) including stacking within 50 metres lead. each 46.50 101 4697.00 0 0 N

114 PWD PWD BLD 2015 16.29 Taking out window shutters (steel or wood) including stacking within 50 metres lead. each 33.50 107 3585.00 0 0 N

115 PWD PWD BLD 2015 16.36 Dismantling terrazzo or mosaic or glazed vitreous or patent cement or tiled flooring or dado skirting of any thickness without sub base. sqm 22.50 335.00 7538.00 0 0 N

116 PWD PWD BLD 2015 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. sqm 11.00 400.00 4400.00 0 0 N

117 PWD PWD BLD 2015 16.40 Dismantling expanded metal or welded fabrics with battens and beading including stacking the serviceable material within 50 metres lead. sqm 15.50 50.00 775.00 0 0 N

118 PWD PWD BLD 2015 16.42 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material within 50 metre lead. cum 768.00 15.00 11520.00 0 0 N

119 PWD PWD BLD 2015 16.43.2 Demolishing cement concrete including disposal of material within 50 metre lead. 1:3:6 or richer mix cum 549.00 16.85 9251.00 0 0 N

120 PWD PWD BLD 2015 16.53.1 Removing following vitreous china sanitorywares carefully for re-use including stacking within 50 metres lead. (Wash basin of all sizes and shapes) each 30.50 100 3050.00 0 0 N

121 PWD PWD BLD 2015 16.53.2 Urinals of all sizes and shapes each 38.00 20 760.00 0 0 N

122 PWD PWD BLD 2015 16.53.3 European/ Anglo/ Indian WC pan of all sizes each 46.00 63 2898.00 0 0 N

123 PWD PWD BLD 2015 16.53.3 PVC Cistern each 23.00 103 2369.00 0 0 N

124 PWD PWD BLD 2015 17.1.1 Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of rubbish to the dumping ground within 50metres lead : Thickness upto 15mm sqm 132.00 290.00 38280.00 0 0 N

125 PWD PWD BLD 2015 17.2.1 Providing and replacing broken floor tile with ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including removing the broken tile and mortar, pointing the joints with white cement mixed with matching pigment etc., complete. Size 300x300mm sqm 1151.00 34.50 39710.00 0 0 N

126 PWD PWD BLD 2015 17.2.2 Size above 300x300mm sqm 1187.00 37.00 43919.00 0 0 N

127 PWD PWD BLD 2015 17.9.1 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts embedding hold fasts in cement concrete blocks with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 metres lead : ( Door chowkhats) each 441.00 15 6615.00 0 0 N

128 PWD PWD BLD 2015 17.9.2 Window chowkhats each 317.00 15 4755.00 0 0 N

129 PWD PWD BLD 2015 17.9.3 Clerestory window chowkhats each 219.00 15 3285.00 0 0 N

130 PWD PWD BLD 2015 17.10 Fixing chowkhat in existing opening in brick / RCC wall with dash fasteners/ chemical fastener of appropriate size (3nos on each vertical member of door chowkhat and 2 nos. on each vertical member of window chowkhats including cost of dash fasteners/ chemical fastener. each 94.00 15 1410.00 0 0 N

131 PWD PWD BLD 2015 17.12.1 Renewing glass panes, with putty and nails wherever necessary: (Float glass panes of thickness 4 mm) sqm 524.00 70.10 36732.00 0 0 N

132 PWD PWD BLD 2015 17.13.2 Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of thickness 5.5 mm sqm 765.00 19.65 15032.00 0 0 N

133 PWD PWD BLD 2015 17.19 Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab including cutting chase and making good and painting exposed portion of the clamps complete. each 144.00 48 6912.00 0 0 N

134 PWD PWD BLD 2015 17.21 Renewing Bijasal wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : cum 60050.00 0.30 18015.00 0 0 N

135 PWD PWD BLD 2015 17.22 Renewing Bijasal wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : Not exceeding 4.00 metres in length. cum 60901.00 0.30 18270.00 0 0 N

136 PWD PWD BLD 2015 17.23 Renewing aluminium door/ window by replacing demaged member by anodised/ powder coated aluminium sections of same diamentions complete including depositng dismentalled section at departmental.store. Kg 354.00 90.00 31860.00 0 0 N

137 PWD PWD BLD 2015 17.25.1 Providing and replacing broken/ damaged false ceiling tiles with new ceiling tiles on existing frame work.( 12mm thick unveneered Nova teak or equivalent super plain tiles) Sqm 604.00 48.50 29294.00 0 0 N

138 PWD PWD BLD 2015 17.25.3 Providing and replacing broken/ damaged false ceiling tiles with new ceiling tiles on existing frame work.( 12 mm thick half random perorated tiles Perforated area 13%) Sqm 583.00 48.50 28276.00 0 0 N

139 PWD PWD BLD 2015 18.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Long pattern W.C. pan of size 580 mm each 2459.00 12 28279.00 0 0 N

140 PWD PWD BLD 2015 18.2.1 Providing and fixing vitreous china water closet squatting pan (Indian type) including cutting and making good the walls and floors wherever required: White Long pattern W.C. pan of size 580 mm each 999.00 23 22977.00 0 0 N

141 PWD PWD BLD 2015 18.4.1 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all: fittings and fixtures complete including cutting and making good the walls and floors wherever required : White pedestal type each 2882.00 14 38907.00 0 0 N

142 PWD PWD BLD 2015 18.6.1 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan including cutting and making good the walls and floors wherever required: White pedestal type each 1180.00 21 24780.00 0 0 N

143 PWD PWD BLD 2015 18.7.1 Providing and fixing 10 litre capacity P.V.C. low level flushing cistern conforming to IS : 7231, with all fittings and fixtures complete. White each 729.00 49 35721.00 0 0 N

144 PWD PWD BLD 2015 18.10.1 Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe with PTMT nuts and PVC bush of approved quality and colour: 30 CM length each 56.00 180 10080.00 0 0 N

145 PWD PWD BLD 2015 18.11.2 Providing and fixing 15 mm nominal bore C.P copper connection pipe with C.P brass nuts collar and PVC bush of approved quality: 45 CM length each 239.00 71 16969.00 0 0 N

146 PWD PWD BLD 2015 18.13.2 Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete: Flat back type urinal of size 460x380x250mm each 1529.00 14 21406.00 0 0 N

147 PWD PWD BLD 2015 18.14.2 Providing and fixing white vitreous china urinal basin as per IS : 2556 complete: Flat back type urinal of size 460x380x250mm each 872.00 10 8720.00 0 0 N

148 PWD PWD BLD 2015 18.15 Providing and fixing one piece construction white vitreous china squatting plate urinal with an integral rim longitudinal flushing pipe, standard size G.I. flush pipe for back and front flush, C.P. brass coupling complete including cutting and making good the walls and floors etc. wherever required : each 2014.00 13 26182.00 0 0 N

149 PWD PWD BLD 2015 18.16 Providing and fixing one piece construction white vitreous china squatting plate urinal with an integral rim longitudinal flushing pipe. each 1401.00 14 19614.00 0 0 N

150 PWD PWD BLD 2015 18.17.1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450 mm each 1430.00 43 61490.00 0 0 N

151 PWD PWD BLD 2015 18.17.4 White Angle back size 400x400 mm each 1174.00 6 7044.00 0 0 N

152 PWD PWD BLD 2015 18.20.2 Providing and fixing stainless steel AISI-304(18/8) wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :( Size 510x410 mm) Each 4095.00 4 14333.00 0 0 N

153 PWD PWD BLD 2015 18.23.2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of brackets, cutting and making good the wall wherever required : Size 600x450x200mm each 4502.00 4 15757.00 0 0 N

154 PWD PWD BLD 2015 18.25.1 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia each 68.50 147 10070.00 0 0 N

156 PWD PWD BLD 2015 18.27.1 Providing and fixing cast iron grating for gully trap. 100x100mm square or round each 30.00 54 1620.00 0 0 N

157 PWD PWD BLD 2015 18.30.1 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : (5mm thick mirror) Sqm 2016.00 4 8467.00 0 0 N

158 PWD PWD BLD 2015 18.32.1 Providing and fixing sand cast iron S&S pipe as per IS: 1729 for soil, waste and vent pipes: 100 mm dia. metre 783.00 10.50 8222.00 0 0 N

159 PWD PWD BLD 2015 18.33.1 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : For 100 mm dia pipe each 85.50 54 4617.00 0 0 N

160 PWD PWD BLD 2015 18.76.2 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. {110 mm dia pipe.} Meter 267.00 125.00 33375.00 0 0 N

161 PWD PWD BLD 2015 18.77.1.1 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. { Tee/ Tee with door/ Bend 45°/ Bend 90° } 75 mm Each 113.00 17.50 1978.00 0 0 N

163 PWD PWD BLD 2015 18.77.3.2 Vent covel{ 110 mm} Each 44.00 156.00 6864.00 0 0 N

164 PWD PWD BLD 2015 18.77.6 Nahani trap 110x75mm Each 90.50 53.00 4797.00 0 0 N

165 PWD PWD BLD 2015 18.77.2.2 Double " Y " with or without door 110 mm each 224.00 51.00 11424.00 0 0 N

166 PWD PWD BLD 2015 18.77.5 "P" trap 110mmx110mm long each 227.00 53.00 12031.00 0 0 N

167 PWD PWD BLD 2015 18.77.8 Plain reducing Tee 110x75mm each 129.00 53.00 6837.00 0 0 N

168 PWD PWD BLD 2015 18.78.2 Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm each 61.00 70.00 4270.00 0 0 N

169 PWD PWD BLD 2015 19.4.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. INTERNAL WORK - EXPOSED ON WALL {40 mm nominal outer dia .Pipes.} metre 362.00 15.00 5430.00 0 0 N

170 PWD PWD BLD 2015 19.4.4 32 mm nominal outer dia .Pipes. metre 271.00 15.00 4065.00 0 0 N

171 PWD PWD BLD 2015 19.5.1 19.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. CONCEALED WORK including cutting chases and making good the walls etc., (15 mm nominal outer dia .Pipes.) metre 133.00 287.00 38171.00 0 0 N

172 PWD PWD BLD 2015 19.5.3 25 mm nominal outer dia .Pipes. metre 213.00 186.00 39618.00 0 0 N

173 PWD PWD BLD 2015 19.7.1 Providing and fixing on wall surface G.I. pipes medium class complete with G.I. fittings and clamps, including cutting, making good the walls etc. and testing of joints complete: (15 mm dia. nominal bore) metre 149.00 10.50 1565.00 0 0 N

174 PWD PWD BLD 2015 19.7.2 20 mm dia. nominal bore metre 185.00 10.00 1850.00 0 0 N

175 PWD PWD BLD 2015 19.7.3 25 mm dia. nominal bore metre 258.00 10.00 2580.00 0 0 N

176 PWD PWD BLD 2015 19.7.4 32 mm dia. nominal bore metre 318.00 10.00 3180.00 0 0 N

177 PWD PWD BLD 2015 19.8.1 Providing and fixing concealed in wall G.I. pipes medium class complete with G.I. fittings and clamps, including painting with anti corrosive bitumastic paint, cutting chases, making good the walls etc. and testing of joints complete: (15 mm dia nominal bore) metre 188.00 10.00 1880.00 0 0 N

178 PWD PWD BLD 2015 19.8.2 20 mm dia nominal bore metre 221.00 56.00 12376.00 0 0 N

179 PWD PWD BLD 2015 19.13.2. Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality: Bib cock (350 grams) Each 237.00 130 30810.00 0 0 N

180 PWD PWD BLD 2015 19.13.3 Stop cock (350 grams) Each 237.00 135 31995.00 0 0 N

181 PWD PWD BLD 2015 19.14.1 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Bib cock (400 grams) each 382.00 10 3629.00 0 0 N

182 PWD PWD BLD 2015 19.14.2 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: {Long nose bib cock (500 grams)} Each 455.00 6 2730.00 0 0 N

183 PWD PWD BLD 2015 19.14.5 Two way bib cock (800 grams) Each 708.00 56 39648.00 0 0 N

184 PWD PWD BLD 2015 19.14.8. Basin mixer pillar tap with spout (1000 grams) Each 1248.00 12 14976.00 0 0 N

185 PWD PWD BLD 2015 19.14.11 Hand shower set with flexible extension pipe Each 754.00 69 52026.00 0 0 N

186 PWD PWD BLD 2015 19.14.13 Toilet paper holder Each 248.00 59 14632.00 0 0 N

187 PWD PWD BLD 2015 19.14.14 Soap dish plate Each 163.00 69 11247.00 0 0 N

188 PWD PWD BLD 2015 19.14.15 Shower rose (revolving type) (150mm) Each 269.00 79 21251.00 0 0 N

189 PWD PWD BLD 2015 19.14.16 Towel rail (600mm long x 20mm dia) Each 338.00 64 21632.00 0 0 N

190 PWD PWD BLD 2015 19.14.17 Towel ring (150 mm dia) Each 254.00 69 17526.00 0 0 N

191 PWD PWD BLD 2015 19.15 Providing and fixing stainless steel drain jali of approved make/quality. each 51.00 145 7395.00 0 0 N

192 PWD PWD BLD 2015 19.16.1 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 25 mm nominal bore each 436.00 59 25724.00 0 0 N

193 PWD PWD BLD 2015 19.17.1 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore each 284.00 69 19596.00 0 0 N

194 PWD PWD BLD 2015 19.42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank litre 7.30 18000 131400.00 0 0 N

195 PWD PWD BLD 2015 19.47 Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design : each 754.00 8 6032.00 0 0 N

Sub Engineer Sub Divisional Officer Executive Engineer

Sarangarh PWD Sub Dn. Sarangarh PWD Raigarh Dn. Sarangarh