Remodelling of Corridor at Hanuman Mandir, Amira Kadal, Srinagar (as an additional component of the Project , Under the Scheme of Development of Hanuman Mandir Amira Kadal Srinagar by way of Construction of Langer Hall, P.C. Dormitory Face lifting an

Demolishing cement concrete manually/mechanical means including disposal of material within 500 meters lead as per direction of Engineer-incharge:(1:3:6 or richer mix)

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar

Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class kail wood

Providing and fixing of partition wall with wooden ornamental pinjra work and 5mm glass on both sides with polish and all other items complete as per directions of EIC at site complete.(Double glazed)

French spirit polishing, Two or more coats on new works including a coat of wood filler

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour or shade Area of slab upto 0.5 sqm 18mm thick

Granite of any colour or shade (Area of slab over 0.5 sqm) 18mm thick

Extra for fixing marble / granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete.

Providing pencil moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite / stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:3 ( 1 cement : 3 coarse sand)

15mm thick cement plaster in 1:4 cement mortar using coarse sand including cost & carriage of material involved complete.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centring and shuttering including strutting proping and removal of form work for foundations, footings, bases of columns slabs etc for mass concrete.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and fixing brass inlays and decorative brass covers for water inlet and outlet drains in the foot-wash(Charan Shuddhi Path) area, fabricated from approved quality brass plates/sheets not less than 3 mm thickness,cut and shaped to required size and pattern, including polishing, engraving wherever required, embedding and fixing flush with finished floor level using cement mortar / epoxy adhesive, complete with making good of surrounding surfaces, ensuring smooth edges, proper alignment and durability in wet conditions, all complete as per the directions of the Engineer-in-Charge

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Providing and fixing of architectural/heritage style/carved panelled or panelled and glazed complete doors including frames, fixing with butt hinges of required size with necessary screws all complete. The design of the doors should strictly be according to the original heritage doors and the Design must be approved on the directions of Engineer-in-charge Second class deodar wood. 50 mm thick

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate.

Praviding and making of POP ornamental cornice including cost of all materials complete 50mmx50mm including all the designd as required on site

Providing and fixing Aluminium hardware fittings of approved make

Tower bolt 100mm

Handle 125mm

Handle 200mm

Ornamental L-drop

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.

PN-16 pipe , 32mm OD(SDR-7.4)

PN-16 pipe , 25mm OD(SDR-7.4)

Internal work-exposed on wall with clamps at 1.00 meter spacing

PN-16 pipe , 40mm OD(SDR-7.4)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing of 1 HP water pump including with all PPR fitting of 32mm dia, including cost of electric switch board of 32 amp, locking system etc complete (crompton, havells, kirloskar)

Providing and fixing of PVC pipes of approved make incl all fittings and fixtures( bends, tees collars wherever required) complete job 100 mm dia

Providing and fixing oval shaped wash basin with 32 mm C.P. brass waste of standard pattern, White Vitreous China Wash basin size 450x300 mm

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.15 mm nominal dia

P/f of following plumbing items od approved make

CP grating

Soap case

Ball valve 650mm

Supply, Installation, Testing and Commissioning of Stainless Steel NRV along with stainless steel shut off valves (10 mm). The job also includes providing and fitting of necessary fittings like nipples, sockets, etc

P/F of 50 litre geyser Horizontal or Vertical type as per site requirement (Venus/Havell's/ Racold make) complete with flexible connection, fisher bolt 3 pin top etc complete with civil work

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS: 8931

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats