Construction of toilets and bathing facilities inside Hindu Burial Ground near Govt. Press in Mutyalampadu 31st Division Works Division-II Area

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH for BRICK WORK

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH for CC

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH. (By manual Means)

Conveyance of excavated earth with a lead of 2 KM including loading, unloading, spreading, sectioning etc., complete as directed by the departmental authorities

Collection and Supply of Dust for filling including Cost and coneyance charges, Spreading, Sectioning etc., complete.

Supply and placing of the RCC M30 (Design Mix) concrete corresponding to IS 456 using 60% of mixer 20mm size graded machine crushed hard granite metal (coarse aggregate) 40% of 12mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, cement 400Kgs including cost and conveyance of all materials like cement, fine aggrregate (sand) coarse aggregate, water etc., to site and all labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work.

Supplying, fitting and placing HYSD bar reinforcement as per drqwings and technical specifications clauses 1000 and 1202 MORD & 1100, 1600 MORTH for bars below 36mm dia including over laps and wastage, where they are not welded including cost and conveyance of binding wire and preparation and tying grills and fixing in position and labour charges etc., complete

Providing concrete for plain concrete (M10) using 220 Kgs Cement ,40 mm nominal size hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH

Brick Masonry in CM (1:6) with Bricks traditional size 23x11x7 cms 2nd class including cost and conveyance of all materials and labour charges for mixing of mortor watering curing etc. complete.

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM.Door Frame section of 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.(BMT-N.83.A)

Supply and fixing of WPC door make with alround WPC frame and inserting 22mm WPC shutter to planks including fixing for necessary size and cost of first quality hinges, tower bolts and necessary fittings ec., completed as directed by departmental authorities. (Approved Rate)

Plastering for walls in CM (1:4) 20mm thick including cost and conveyance of all materials and labour charges for mixing of mortor watering curing etc. complete

Plastering for Celing in CM (1:3) 12mm thick including cost and conveyance of all materials, labour charges for mixing of mortor watering curing etc. complete.

Walling with glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including complete for finished item of work, but including the cost of conveyance of all materials.

Flooring with ceramic tiles, set over base coat of cement mortar (1:8) 7.3 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, complete for finished item of work, but including the cost of conveyance of all materials.

Supply of Chequered Cement Concrete heavyduty tilesconforming toIS:13801using aggregates,cement,pigments of size300x300mm and thickness25 mm of any shades laid over a bed of CM (1:5) 20 mm thick fixed with cement slury and jointing with cement putty mixed with colour pigment including cost and conveyance of all materials and labour charges for fixing watering, curing etc.,complete as per ss .

Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 630 x 450 mm - Double C.P. Pillar cock BMW-D.23

S & F 12.7 mm heavy duty NP Sink cock etc.,complete as directed by the departmental authorities. BMW-E.26

Labour charges only for fixing Indian makeFlat Back Wash Hand Basin with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting Pillar Taps complete with standard CI brackets including wooden block BMW-D.28

Toilets are provided as per plan with a provision for fixing the wash basin, W.C. etc only is made with M.S. steel section secured to the walls with toilet bracket provision excluding cost of WC/ Wash basin etc BMS-W.43

Supply and fixing of 25mm dia 1.80mm thick surface pvc pipe / casing and caping ISI with all accessories fixing at chromium plated metalic saddles and decolam board for swutches for light fan and separate plug points including all labour charges etc.,complete as directed by the departmental authorities.

Supply of 2 core, 1.5 Sq mm ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990. Makes: As per list of recommended brands as category I MAT-02769

Supply of 2 core, 2.5 Sq mm ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990. Makes: As per list of recommended brands as category I MAT-02770

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A Modular switch, Ceiling rose and Module Horizontal/ Vertical Cover Frame covering to switches/ sockets control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings with Modular Accessories as directed by the departamental authorities.

Supply and Transportation of 0.5HP(25x25mm) Single phase Mono block CI body motor pumpset confirms to IS 9079:2002 Makes: As per list of recommended brands as category I.

Supply of Hot Dip galvanized 18 SWG Module metal box with earthing terminal MAT-02715

Supply of Vertical Cover Frame Makes: As per list of recommended brands as category I.

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'P' trap BMW-D.13

Supplying and Fixingbest Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 BMW-D.16

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007).For 15.90mm OD Pipe - SDR 11 BMW-I.227

Supply of Polyethylene water storage tank double layer conforming to IS: 12701-1996 with lid etc complete (BMW-G.01)

Supplying & Fixing low down porcelain flushing tank 10 Lit Capacitywith internal components BMW-D.11

Supply & Fixing of 2 in 1 Bibcock cum Health Faucet with 1m long tube and wall hook including cost and conveyance of all materials etc., complete as directed by the departmental authorities. MAT-02262

S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 15 mm NB Size BMW-F.21

Supply of not less than 1100mm length, Box type powder coated tube light luminaire with necessary wiring suitable for fixing 2 Nos retrofit T8 LED tubes but without tube and choke. Makes: As per list of recommended brands as Category-I. ELEC-3.8.18

Painting with Priming Coat to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS

Painting walls with Plastic emulsion or other equal and approved water proof cement paint over priming coat, 2 coats (All colours) to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS.For Internal Walls

Painting walls with Plastic emulsion or other equal and approved water proof cement paint over priming coat, 2 coats (All colours) to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS.For External Walls

Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 410 x 265 x 305 mm. For MAT-01805 BMW-D.34

Labour charges only Fixing flat back Bowl/ Half stall urinals with fixing C.P. Spreader and screws complete. For MAT-01805 BMW-D.34

Supply & Fixing of Rose shower with revolving ball joint & 115mm long shower arm with 7 years warranty BMW-I.197

Supply, installation, testing and commissioning of 25mm dia Gate valve. Makes: As per list of recommended brands. MAT-04485

Manufacture, Supply, & Delivery of HDPE pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight Length) (MAT-07241) 160mm dia

Labour to be engaged for Fixing of Manhole Connection etc., complete as directed by the departmental authorities

Cutting of C.C. Road surface including stacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities.

Earth work excavation and depositing on bank with an initial lead of 50 Mts and lift of 3 Mts in loamy and clayey soils like black cotton soils, red earth and ordinary gravel as per SS 20-B. For pipe line trench

Supply and delivery of Crusher dust from approved quarries including cost and conveyance to work spot including all labour charges for filling, sectioning, watering etc., complete as per S.S. and as directed by the departmental authorities.

Providing concrete for plain concrete (M20 Design mix) using 330 Kgs Cement 20 mm,10mm nominal size Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH

Engining Hydralic tractor on hire basis for loading of debrise and shifting of debrise to the desired place including cost of fuel and driver charges as directed by departmental authorities etc., complete as directed by departmental authorities. (5 Trips a Day)

Construction of 0.45 x 0.45 M (1'6" x 1'6") Inspection Chamber depth varying from 0.30 Mt. to 0.60 Mt. with a slope of 30mm in the channel along with sewer lines as per the approved departmental drawings including earth work excavation and laying of C.C M10 bed with 40mm H.B.G. metal, brick work with C.M. (1:3) for Manhole using 2nd class best quality.The rate includes plastering with C.M(1:3) 20mm thick both inside and out side and smooth finishing of Sewer channel, providing coverslab of 75mm thick with R.C.C M30 Design Mix using 400Kgs of Cement/Cum including cost and conveyance of all materials, seignorage charges including cost and fabrication of steel used in R.C.C as per S.S. including benching, channeling, finishing and refilling with excavated earth and conveyance of surplus earth etc., complete as per S.S and as directed by the departmental authorities for finished item of work. (APDSS NO.1325)