Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.9 LAccepted-AOC V P O MILLAH TEHSIL SHILLAI DISTT SIRMOUR 173029 | SIRMAUR | HIMACHAL PRADESH | 173029 | ₹1.9 L Quoted ₹2.7 L | L1 | Accepted-AOC L1 work awarded |
| 2 | L2₹2.8 L+₹14,359 (5.35%)Rejected-Finance VILLAGE P O AMARPUR TEHSIL GHUMARWIN DISTT BILASPUR H P | BILASPUR | HIMACHAL PRADESH | 174001 | ₹2.8 L+₹14,359 (5.35%) | L2 | Rejected-Finance L2 |
| Sl No | Description | Qty | Unit | Kuldeep Singh L1 | Manohar Lal L2 |
|---|---|---|---|---|---|
| 1.00 | Excavation in foundation & trenches etc in earth work including all kinds of soil such as pick work Jumper work, blasting soft and hard rock conglomirate up to all leads and lifts stacked the excavated soil not more than 3 mtrs clear from the edge of excavation and then retuming the stacked soil in benches consolidating eac each deposited layer by ramming and watering and then desposing of all surplus excavated earth as directed by the Engineer-in-Charge | 2.1 | Cum | 550 ₹1,155 Lowest | 590 ₹1,239 |
| 2.00 | Providing laying cement concrete 1:6:12 (1Cement: 6Sand:12Graded stone agreegate 40mm nominal size) curing complete excluding cost of form work in foundation and plinth including entire carriage of material upto all leads and lifts. | 0.53 | Cum | 10,000 ₹5,300 Lowest | 11,000 ₹5,830 |
| 3.00 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to a fair finish including centering & shuttering and propping etc. with wooden battens and billies, height of propping and centering below supporting floor to cielling not exceeding 4mtrs, removal of the same for insitu RCC and PCC work in flat surfaces such as softs, suspended floors, roofs, landing and the like floors etc. 200mm thickness including entire carriage of material up to all leads and lifts. | - | - | - | - |
| 3.01 | Wall any thickness but not less than 0.1mtr thickness attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level and to the entire satisfaction of the Engineer in-charge | 21.6 | Sqmt | 600 ₹12,960 Lowest | 700 ₹15,120 |
| 4.01 | Providing and laying cement concrete 1:3:6 (1cement: 3sand: 6 graded stone agg. 20mm nominal size)and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts. | 0.53 | Cum | 12,000 ₹6,360 Lowest | 12,500 ₹6,625 |
| 4.02 | Wall any thickness but not less than less than 0.1mtr thickness attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level and to the entire satisfaction of the Engineer-in-charge. | 5.52 | Cum | 10,000 ₹55,200 Lowest | 11,000 ₹60,720 |
| 5.00 | Providing and fixing of MS sheet 1.60 mm thickness manhole cover (size 800x1200) fixed with MS angle iron frame 35x35x5mm duly welded and fixed in RCC slab with MS flat 40x5mm and anchor bolt 12mmx125mm including cost of welding charges, carriage fixing and applying priming coat and locking arrangement complete in all respect and to the entire satisfaction of the Engineer-in-charge. | 5 | Each | 6,500 ₹32,500 Lowest | 6,700 ₹33,500 |
| 6.00 | Providing and fixing of MS febricated chamber box to cover the wheel valve in distribution system made of angle iron 35x35x5mm and MS sheet of 1.25mm thick including priming coat painting etc. and all accessories such as locking arrangement. | - | - | - | - |
| 6.01 | On Supply | 20 | Each | 7,000 ₹1,40,000 Lowest | 7,200 ₹1,44,000 |
| 6.02 | On fixing | 20 | Each | 750 ₹15,000 Lowest | 790 ₹15,800 |
Tender Value
₹2.0 L
EMD Value
₹3,985
Closing Date
13 Apr 2026, 3:00 pmClosed
EE JSV Division Jagatkhana
EE JSV Division Jagatkhana
(SH Reframing of existing damaged wheel valve chamber to ensure proper locking arrangement at tank supply level).
2026_HPIPH_133292_1
NIT 636-735 Dated 02-04-2026
Open Tender
Repair and Maintenance Works
Item Rate
120 days
Namhol
Please refer Tender documents.
3 documents required · 3 mandatory
₹350
Yes
₹3,985
Yes
24 Jun 2026
4 Apr 2026
13 Apr 2026
4 Apr 2026
13 Apr 2026
4 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Excavation in foundation & trenches etc in earth work including all kinds of soil such as pick work Jumper work, blasting soft and hard rock conglomirate up to all leads and lifts stacked the excavated soil not more than 3 mtrs clear from the edge of excavation and then retuming the stacked soil in benches consolidating eac each deposited layer by ramming and watering and then desposing of all surplus excavated earth as directed by the Engineer-in-Charge | |||||
| 2Providing laying cement concrete 1:6:12 (1Cement: 6Sand:12Graded stone agreegate 40mm nominal size) curing complete excluding cost of form work in foundation and plinth including entire carriage of material upto all leads and lifts. | |||||
| 3Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to a fair finish including centering & shuttering and propping etc. with wooden battens and billies, height of propping and centering below supporting floor to cielling not exceeding 4mtrs, removal of the same for insitu RCC and PCC work in flat surfaces such as softs, suspended floors, roofs, landing and the like floors etc. 200mm thickness including entire carriage of material up to all leads and lifts. | |||||
| 3.01 | Wall any thickness but not less than 0.1mtr thickness attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level and to the entire satisfaction of the Engineer in-charge | - | Sqmt | - | - |
| 4.01 | Providing and laying cement concrete 1:3:6 (1cement: 3sand: 6 graded stone agg. 20mm nominal size)and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts. | - | Cum | - | - |
| 4.02 | Wall any thickness but not less than less than 0.1mtr thickness attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level and to the entire satisfaction of the Engineer-in-charge. | - | Cum | - | - |
| 5Providing and fixing of MS sheet 1.60 mm thickness manhole cover (size 800x1200) fixed with MS angle iron frame 35x35x5mm duly welded and fixed in RCC slab with MS flat 40x5mm and anchor bolt 12mmx125mm including cost of welding charges, carriage fixing and applying priming coat and locking arrangement complete in all respect and to the entire satisfaction of the Engineer-in-charge. | |||||
| 6Providing and fixing of MS febricated chamber box to cover the wheel valve in distribution system made of angle iron 35x35x5mm and MS sheet of 1.25mm thick including priming coat painting etc. and all accessories such as locking arrangement. | |||||
| 6.01 | On Supply | - | Each | - | - |
| 6.02 | On fixing | - | Each | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.44 MB
PWD6.pdf
Tender Documents • 0.68 MB
PWD8.pdf
Tender Documents • 1.31 MB
TC.pdf
Additional Documents • 0.45 MB
BOQ_197116.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .