Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.7 LAccepted-AOC | ₹25.7 L | L1 | Accepted-AOC L1 Bidder |
| 2 | L2₹26.0 LRejected-Finance | ₹26.0 L | L2 | Rejected-Finance Not Lowest |
| 3 | L3₹26.0 LRejected-Finance 376 SREEPUR STATION ROAD MADHYAMGRAM BAZAR KOLKATA 700130 | KOLKATA | NORTH 24 PARGANAS | WEST BENGAL | 700130 | ₹26.0 L | L3 | Rejected-Finance Not Lowest |
| Sl No | Description | Qty | Unit | A. G. CONSTRUCTION L3 | project construction company L2 | BEAUTY CONSTRUCTION L1 |
|---|---|---|---|---|---|---|
| 1.00 | “Outside repair and maintenance including outside painting work and other related civil works of Administrative building cum Jeerat 400KV Area Office at Jeerat 400 KV Sub-Station, WBSETCL.". | 1 | Nos | 26,00,127.42 ₹26.0 L | 25,96,834.47 ₹26.0 L | 25,73,314.3 ₹25.7 L |
Tender Value
₹19.7 L
EMD Value
₹19,800
Closing Date
16 Feb 2026, 9:00 amClosed
SE and Area Manager,JAO
Office of the Superintending Engineer Area Manager Jeerat 400KV Area Office Jeerat 400 KV Sub-Station Campus, Kanchiara, 24 PGS N, WB 743711
Outside repair and maintenance including outside painting work and other related civil works of Administrative building cum Jeerat 400KV Area Office at Jeerat 400 KV Sub-Station, WBSETCL.
2026_SETCL_990720_1
SEAM / JAO / e-NIT / Civil / Jeerat / 020
Open Tender
CIVIL WORKS
Jeerat 400KV Substation, WBSETCL
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹19,800
Yes
Jeerat 400KV Area Office
29 May 2026
20 Jan 2026
19 Feb 2026
20 Jan 2026
16 Feb 2026
29 Jan 2026
28 Jan 2026
“Outside repair and maintenance including outside painting work and other related civil works of Administrative building cum Jeerat 400KV Area Office at Jeerat 400 KV Sub-Station, WBSETCL.".
Percentage BoQ
BoQ_Ver3.0
NIT No.:- SE&AM/JAO/e-NIT/Civil/JEERAT/020 Dated 20/01/2025
Bidder Name :
PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )
NUMBER #
Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or rougening of concrete surface, including throating, nosing and drip course, scaffolding and staging where necessary (excluding cost of chipping over concrete surface)(ii) With 4:1 cement mortar. (i) 20 mm. thick plaster a) Ground floor
20 mm. thick plaster a) First floor
20 mm. thick plaster a) Second floor
20 mm. thick plaster a) Third floor
Neat cement punning in wall about 1.5mm 0.152cum cement/100 sqm
Applying 2 coats bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per manufracturer 's specification
Extra rate for using water proofing and plasticising admixture @ 0.2% by weight of cement (or at manufacturer's specified rate ) for concrete of various grades.
Ordinary Cement concrete (1:1.5:3) withgraded stone balast( 20mm nominal size) excluding shuttering and reinforcement if any - as per relevent IS code ( Pakur Variety ) a) Ground floor
b) 1st floor
c) 2nd floor
d) 3rd floor
Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.a) Ground floor
b) 3rd floor
Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.i) In ground floor including roof. (a) upto 150 mm. thick
Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars.a) Ground floor
b) 1st floor
c) 2nd floor
d) 3rd floor
Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge
M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs . Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.a) Ground floor
b) 1st floor
c) 2nd floor
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (a) One Coat a) Ground floor
b) 1st floor
c) 2nd floor
d) 3rd floor
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. a) Super Protective 100% Acrylic Emulsion.a) Ground floor
b) 1st floor
c) 2nd floor
d) 3rd floor
Hire and labour charges for shuttering with centring and necessary staging up to 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works.(a) 25mm. to 30mm. shuttering without staging in foundation etc. a) Gr. Floor
(b) 25 mm. to 30 mm. thick wooden shuttering as per decision & direction of Engineer-in-charge.a) Gr. Floor
b) 1st floor
c) 2 nd floor
d) 3 rd floor
Anti-termite treatment to the soil under floor with chemical emulsion by admixing imidacloprid emulsifiable concentrate 72 ml in 34 litres) with water by weight including drilling vertically 12mm. dia holes at the junction of floor and wall at 300mm. interval to reach the soil below using hand operated pressure pump to squirt chemical emulsion into the pump to squirt chemical emulsion into the holes at the rate of one litre per hole. The holes shall be sealed after operation to match with the existing floor. The entire work is to be carried out as per specification laid down at table 1 & in para 5.3.1.3 of code I.S.-6313 (Part-III)- 2013.
125 mm. thick brick work with 1st class bricks in cement mortar (4:1) a) in ground floor.
Brick work with 1st class bricks in cement mortar (4:1) - a) foundation and plinth
Ordinary Cement concrete (mix 1:2:4) with graded stone chips ( 6-20 mm.nominal size ) excluding shuttering and reinforcement, if any , as per relevent IS codes. - Pakur variety
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. - (a) Depth of excavation not exceeding 1,500 mm.
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. Including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. A) For works in foundation, basement and up to roof up to 4m. (i) Tor steel/Mild steel TATA/SAIL/RINL
Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (Concrete and brick work for mending damage will be paid separately) (a) Above area 2.5 Sq.m. (IN-30, P-152, BW)
M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge. In ground floor.
Supplying, fitting and fixing UPVC pipes A - Type and fittings conforming to IS : 13592 - 1992 with all necessary clamps nails including making holes in walls, etc. and cutting trenches in any soil, through masonry concrete structure etc. if necessary and mending good damages including jointing with jointing materials ( Spun yarn, valamoid / bitumen / M. seal etc.) complete.A) UPVC pipes i) 110 mm dia
B) Bend 87.50 degree. i) 110 mm dia
C) Shoe i) 110 mm dia
D) Plain Y i) 110 mm dia
E) Plain Tee i) 110 mm dia
F) Vent Cowl i) 110 mm dia
G) Pipe clip i) 110 mm dia
H) Door Bend 110 mm (T.S)
I) Door tee
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothing surfaces by sand papering etc.
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : ( Hi - gloss ) (i) Two coats (with any shade except white) on steel surface
Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing film Natural white
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.i) 5mm thick coloured / tinted / smoke glass
Supplying, Fitting & Fixing 30 mm thick both side prelaminated Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of E.I.C.. a) In Ground Floor
Supplying, Fitting & Fixing Factory made prelaminated P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm Prelaminated PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm M.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer’s specification and direction of Engineer-in-Charge.
Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in (a) 35mm thick shutters (single leaf)
Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contr.
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (P-12, IN-19 I, P& SW). (i) 50 mm dia. medium quality
(ii) 25 mm dia. medium quality
Supplying and laying chequered tiles of any shade & of approved quality with (1:1½:3) cement concrete laid in panels or patterns as directed in pavement, footpath etc. including necessary underlay 25 mm thick [avg] cement mortar (1:3) complete in all respect with all labour and materials. [Using cement slurry @ 4.4 kg/Sq.m at back side and @2.4 kg/Sq.m for joint filling] Red Variety (i) 25 mm. thick
Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten. (i) 19mm
Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge. The rate includes the cost of labour, adhesive and all incidental charges thereof. In ground floor (ii) Thickness of laminate 1 mm
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.22 MB
BOQ_2422210.xls
BOQ • 0.42 MB
Download all tender documents and submit your bid