S/R TO E/M INFRASTRUCTURE AT OLD MES SUB STN, OVERHEAD CONDUCTOR OF SECURITY LIGHTS AT MES PUMP HOUSE, BLDG NO. P-22, AND CERTAIN MINOR WORK AT AFS MANDORE UNDER GE (AF) NO.2 JODHPUR

Amount

M&L Point wiring complete with 1.5 Sqmm single core multi standard copper conductor PVC FLRS insulated unsheathed cable in and incl PVC conduit with accessories existing pressed steel terminal boxes (sunk in wall) including new 3.00 mm thick plastic laminated sheet top cover with 1.50 Sqmm insulated unsheathed PVC covered copper conductor for common earth and connecting to earth dolly for :-

One light point controlled by one one way switch

One celing fan/exhaust fan point controlled by one one way switch

One socket out let 5 Amps on the same board

One socket out 3 pin 5 Amps on the independent board.

All as per item No 2 above but with 2.5 Sq mm single core multi standard copper conductor cable for 6 pin 15 Amps socket out let on independent board.

S&F switch flush type 5 Amp, 240 V single pole one way ISI Marked.

S&F switch socket combination 2 in 1,5 Amps flush type

S&F switch socket combination 3 pin 16 Amps flush type

S&F ceiling rose, 3 Terminal Point/PVC/polycarbonate, isolated body.

M&L for sheet metal enclosures distribution board where MCB to be used with 200 Amps rated bus bar CL-IP-43 240 V, 8 way single pole & neutral link

M&L in replacement for MCB single pole 6 Amps, 240 V .

M&L in replacement for MCB single pole 10 Amps, 240 V .

M&L in replacement for MCB single pole 16Amps, 240 V .

M&L in replacement for MCB single pole & neutral 32 Amps, 240 V .

M&L in replacement for MCB triple pole & neutral 63 Amps, 415 V

M&L for sheet metal enclosures distribution board where MCB to be used with 200 Amps rated bus bar CL-IP-43 240 V, 4 way Triple pole & neutral link double door complete all as specified and as directed.

S&F sub main wiring with 2 run of 6 Sq mm single core copper conductor cable drawn through in rigid PVC conduit ISI marked with fitting and 4.0 Sq mm single core copper conductor cable for continues earth wire all as directed.

S&F in repair Building Security LED 45 Watt fixture made of pressure die cast housing with toughened glass and high power LEDs with option of secondary optic with IP65 protection ,commercial building including connection all as per cat ref no. LSTS-45-CDL-M complete all as specified and directed by Engineer in Charge. Make -Crompton or equivalent Philips/ Havells .

S&F in repair LED batten (1.2 m) made of CRCA sheet housing with a PC glossy diffuser and mounting accessories duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 105 lumens per watt and total power consumption not more than 19 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete. Make - Crompton Cat No LCTLN-20-WW or equivalent in Philips/Wipro.

S&F in 36W LED Recessed mounted linear with it minimalistic shape of CRCA sheet housing with a PC glossy diffuser and mounting and mounting accessories duly prewired connection having a nominal system 4 ft complete all as specified and as directed .Make- Crompton Cat no-LCLR90-36-WW or eqult Bajaj/Philips.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm 6.0mm thick, buried directly in ground (earth pith not less than 2.25 mtr deep below ground level) with top edge of plated not less than 1.5 mtr below normal ground level connected toincl galvanized iron or steel earth GI strip 32x6 mm dia by mean of bolts nuts check nuts & washers of galvanized iron or steel pipe 15mm dia medium grade and connected to main switch board watering pipe shall be 20mm dia GI medium grade incl excavation earth work in any type of soil pit RCC cover complete.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm 6.0mm thick, buried directly in ground (earth pith not less than 2.25 mtr deep below ground level) with top edge of plated not less than 1.5 mtr below normal ground level connected toincl galvanized iron or steel earth lead wire 4.0mm dia by mean of bolts nuts check nuts & washers of galvanized iron or steel pipe 15mm dia medium grade and connected to main switch board watering pipe shall be 20mm dia GI medium grade incl excavation earth work in any type of soil pit RCC cover complete.

M&L Heavy duty exhaust fan 300 mm sweep complete all as specified and as directed.

Dismantling and taking down form LT overhead line,GI earth continuous conductor of any size and removal form site all as directed.

Taking down old LT insulators of any size/type form pole crossarm and removal form site.

Supplying, Laying, Jointing and testing of under ground cable XLPE insulated, 1100 volt grade heavy duty armoured with stranded aluminium conductor 3.5 core 25 sqmm laid in trenches/ duct/ pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and directed by Engr-in-Charge.

Supplying, Laying, Jointing and testing of under ground cable XLPE insulated, 1100 volt grade heavy duty armoured with stranded aluminium conductor 3.5 core 50 sqmm laid in trenches/ duct/ pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and directed by Engr-in-Charge.

Supply and fix single core PVC insulated FR cable with multi stranded copper conductor3 core 1.5 sq mm cross sectional area ,1100 volts grade all as specified and as directed.

M&L LED Flood light luminaire 200 Watts Capacity pressure die cast aluminium housing with heat resistant toughned glass and IP66 protection System efficeincy of 110LPW option for 3000K 10 KV SPD include complete all as directed by Engr-in -Charge Make :Crompton cat pat no -LFLN-200-CDL/60-M or eqult Havells/Bajaj

PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregates as in foundation of poles etc filling and mess concrete complete all as specified.

PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregates as in foundation of poles etc filling and mess concrete complete all as specified.

Supply and fixing MCCB in replacement of 63 Amps, 4 pole, 415 volts, 50 HZ, rupturing capacity 16KA, connection with proper size of thimbles complete including taking out defective/ unserviceable MCCB all as specified and directed.

Supply and fixing MCCB in replacement of 100 Amps, 4 pole, 415 volts, 50 HZ, rupturing capacity 16KA, connection with proper size of thimbles complete including taking out defective/ unserviceable MCCB all as specified and directed.

Supply and fix MCCB in replacement with thermal magnetic release adjustable type DU 160, 160A, 36KA, 415 Volts 3/4 pole all as specified & directed.

Supply and fix MCCB in replacement with thermal magnetic release adjustable type DN2-250D, 250A, 415 Volts 4 pole 36KA all as specified & directed.

S & F Change over main switch, on load, four poles, 100 Amps, 415 Volts, 36 KA ,50 Hz, with enclosure, fixed in the existing LT panel board/ sheet metal enclosure including connecting up incoming/ out going cables with suitable lugs and testing complete all as specified and as directed.Make-Havells/HPL

S & F Change over main switch, on load, four poles, 200 Amps, 415 Volts, 36 KA ,50 Hz, with enclosure, fixed in the existing LT panel board/ sheet metal enclosure including connecting up incoming/ out going cables with suitable lugs and testing complete all as specified and as directed. Make-Havells/HPL

S & F LED Light fittings 1 X 20 watts ,220 V AC decorative box type with driver ,holder including LED tubelight connecting up with three core copper conductor cable of size complete all as specified and as directed.

Dismantling concrete poles/steel tabular pole any size for reuse within 50 mtr complete all as specified and as directed.

Refixing of PCC pole/steel tabular pole 9 mtr with complete all as specified and as directed.

Dismantling and taking out the stay assembly complete incl demolition of plain cement.

M/L for stay assemble complete with wccessories as shown in electricla plate No 1 incl GI adustable stay Rod of 16mm Dia, GI Stay wire of size 7/4 mm incl stay clamps, loop type insulator excavation in any strata with PCC 1:3:6 & Concrete all as specified and directed incl taking down old unserviceable stay assembly.

Material and labour for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick, buried directly in ground, vertically to a depth not less than 2.25 mtr deep below ground level with top edge of the earth plate at depth not lss than 1.5 mtr below ground level earth plate surrounded by 15 cm thick and packed layers of charcoal, dust and common salt, earth lead GI strip 32 x 6mm by means of bolts, nuts, check-nuts and washers of galvanised iron and thimbles and of earth wire protected by galvanised iron pipe light grade 40mm bore and water pipe 20mm bore GI medium grade with funnel and wire mesh complete 1:3:6 type C-1 using 20mm graded stone aggregate in lieu of CI cover and frame etc all as specified and shown in electrical plate No 3 of SSR- 2009 (Part-1)

S & F FRP Junction box for streets lights central with linked door control including 6 Amps MCB SP and strip for MCB with assembly of 4 way terminal and dimensions are 140 X 140 X 95 MM complete all as specified and as directed.

M & L in GI tubing Light grade 50mm incl all accessories for protection cable complete all as specified and directed in engr-in-charge

Supply and laying Synthetic Rubber insulated mates 2.5 mm thick for voltage upto 11 KV for electrical purpose suitable for electrical shock safety of size 2m X 1m complete all as specified and as directed.

M/L for Repairs to out door LT panel including taking down for repair as follows :- ( a ) Supply and fixing of MS sheet 16 SWG( 1.6 mm ) and fabrication of back side cover of LT panel including cutting to required size and shape fixing in position by bending, welding all as required for proper functioning of LT panel shutters including two coats of coats of synthetic enamel paint over a coat of red oxide. (b ) Supply and fixing of hinges , tee type stove enamelled black medium weight , cold rolled and mild steel 30 mm size and fixed door shutters . ( c ) Supply and fixing of locking arrangement with MS sliding door bolts hasp and suitable for use with pad lock of size 200 mm. ( d ) Mild steel work conforming to Fe-410-0 or Fe-310-0 as in angle iron frame work , cut to size including bending and welding angles as necessary and re -fixing of MS sheet of panel including a shop coat of red oxide primer.

Excavation in trenches n.exc 1.5 Mtr wide and n.exc 1.5 Mtr in depth in soft/loose soil and getting out complete all as directed.

Excavation in trenches n.exc 1.5 Mtr wide and beyond exc 1.5 Mtr in depth in soft/loose soil and getting out complete all as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for (roof padding, flooring above ground floors) including roof treatment and removing from site all as specified and directed.

M&L for 50 mm thick (average) cement concrete type C-0, 1:3:6 , 12.5 mm graded aggregate in padding over roof.

M&L for 10 mm thick rendering in CM 1:3 over concrete surfaces (Roof) mixed with water proofing compound @ 3% by weight of cement complete all as specified. NOTE : Water proofing compound shall be measured and paid for separately as “Supply only”

Supply only integral water proofing compound ISI marked.

M & L for preparing new surfaces and applying two coat of Polyurethene (PU) acrylic based water proofing liqied compound over one coat of diluted self priming with reinforcing fabric sheet as per manufactirer instruction to stop leakage/sepage from roof / wall complete all as specified and directed by Eng-in-charge ( Note ;- quoted rate shall deemed to be included for work in building/structure of any height)

Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 on on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing.

M&L for rendering 15 mm thick in CM 1:6 on on ceiling or surface other than fair face of brick-work or on one side of lathing complete all as specified and directed.

Taking down chowakats with shutter(without taking of shutter from frame) n.exc 1.5 Sqm Each and removing from site.

S & F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded tower bold 150 mm 02 nos in each leaf.

S & F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars,dovetailed or welded tower bolt 150 mm 02 nos in ech leaf .complete.

S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden beads supplied with shutters in square n.exc. 0.5 sqm in each pane.

S&F Galvanised steel wire cloth. 0.46 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed.

M & L applying two coats of synthetic enamel paint over a coat of red oxide on steel surfaces of any description and girth including preparation of new steel surfaces complete all as specified.

Demolition of stone/boulder masonry for exhaust openning built in cement mortar including all quoins, arches, pillars, etc. and removing from site all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coat of oil emulsion distemper (OBD) over alkli resistent primer over two coat of wall care putty complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of Ceiling and applying two coat of white wash over one coat of primer complete all as specified and directed.

Taking down old rolling shutter with frames exc 1.5 sq. m but n exc 4 sq. m each and removing from site.

S & F Steel rolling shutters with grill type opening of 1 mm thick, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type completed all as specified and directed.

S & F Mild steel plates as duct cover or similar work including handle,chequered, Fe-290 (Gde E-165),5 mm thick or over in thickness in available sizes completed.

M&L for surface excavation of soft/disintegrated rock n.exc 30 cm deep and averaging 15 cm deep getting out loose/soft soil complete.

M&L for 100 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregated as in sub base finish even and smooth without using extra cement complete.

M& L chequred rubber moulded cement concrete tiles 30 cm x 30 cm x 20 mm to 25mm thick (Machine made) set jointed and pointed in neat cement slurry in floor with grey cement and pigment including 15 mm thick screed bed in CM 1:6.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) and removing from site all as specified and directed.

M&L for 25 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) complete all as specified and directed.

M & L machine cut kota stone slab minimam size 550x550 mm flooring18-20 mm thick over cement screed 15 mm thick in cement mortor 1:4 laid & jointed with grey cement slury mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete.

M & L Kota stone slab18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slury mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete.

Dismantling of stone chajja/slab of any size and any thickness complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, chhajja/cladding to wall, fixed with self tapping screws as specified.

S & F Steel work in tubular trusses posts including special shaped washer for chahjaa etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 St.-240 complete all as specified and directed.

M & L PCC Type B1,1:2:4(20 mm garded agreagate) in roof kerbs or mud stops,rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete as directed.

S & F Framed work such as grills,gratings or similar work as exhaust hole frame with jalli conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S & F anodised aluminium frame section powder coated for door shutter and partition with one or more rebates including joining cleat for fixing and including all necessary fitting and fixes complete all as specified.

S & F Sheet glass thicness 5.5 mm,ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane includin all necessary fiting and fixture complete.

S & F plane 12 mm thick PVC sheet/board of required size as partition fixed with aluminium frame including all necessary fitting for fixing complete all as specified and directed.

S & F rubber beads arround sheet glass fixed in all frame work & wt of rubber beads not less than 200 gms per RM all as specified

S & F brass extruded alloy handles fabricated type polished of size 150 mm all as specified and as directed.

S & F roller for sliding of aluminium door complete all as specified and as directed.

S&F brass mortice lock, vertical type, size 100 mm , 4 levers with 2 keys

S& F, Collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.

M&L preparation of new steel Surfaces & applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

Cutting holes in stone walls for inserting hold fasts and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 depth of embedded portion of hold fast exc half brick and n exc one bricks.

S & F mild steel work as Flat iron ,Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0

S & F Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets hanging also fastening and fixing for ladder etc complete Fe-410=W(Grade-E-250) quality A, all as specified and directed.

S & F cutting hole into or through in stone wall Exc 150 Sqcm but not exe 400 sqcm built in cement mortar or cement lime mortar and walls of cement concrete

S & F Framed work such as Cooler stand, grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors,framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,complete all as specified.

Plain cement concrete Type D2, 1:4:8 ( 40 mm graded stone aggregate) as in foundations filling and mass concrete complete all as specified.

S & F compound girders and stanchions,column, lattice girder, aerial masts, staging for water tanks and the like including caps, bases. Splices etc built up from two or more beam or channel sections or angles with plates , including all lattice bars, stiffeners , gusset plates, etc Fe-290 grade E-165

S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete grde Fe-290 Gde E-165.

S& F Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holespunched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles.

M & L Roughly squared stone lintels hammer dressed on face and soffits, hoisted, set and pointed in lime mortar 1:3 or cement mortar 1:6 complete, n exc 3m in length complete all as specified.

M & L Rendering 20 mm thick on stone masonary or surface other than fair faces of brick work with CM 1:6 complete all as specified.

M & L preparation of new plastered or unplastered surface and applying two coat of cement base paint over one coat of putty all complete all as specified and directed.

M & L preperation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described applying two coat of synthetic namel paint over one coat of red oxide primer complete all as specified and directed

S & F Prelaminated particle board,18 mm to 19 mm thick interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination, incl fixed with screws to timber or wall.

M&L Plain fillets n. exc. 3 sq.cm of 2 nd class soft wood,square, rectangular or triangular in section, clean sawn, secured with nails or brads.

S & F Brass handles size 100 mm , cast type, polished bright all as specified and as directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised

S & F Magnetic catches ( Size = 8 mm),(NO 2.) as specified and as directed.

S & F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified

S & F Plain, framed,panelled shutters of 2nd class hard wood of 40 mm (any number of panels), with panels of timber flat on both sides (feather edged), orof veneered particle board medium density, wood particle board withcommercial face veneers: supplied and fitted to chowkats.

S & F Glazed and skeleton shutters 2 nd class hard wood of 35 mm thick, open rebated and prepared to receive jali,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded fitted with cut and mitred beads for securing glass,jali etc. supplied and fitted to chowkats all as specified.

M & L M&L Glazed coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in CM 1:3 Complete all as specified and directed

S&F extruded aluminium alloy handles 150 mm fabricated type, anodised complete all as specifed.

S & F 300 mm mild steel ordinary rat tail rod pattern springs including roller and plate complete all as specified and directed.

S & F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed withtinned tacks, or galvanised wire staples complete all as specified.

M&L Point wiring complete with 1.5 Sqmm single core multi standard armoured flame proof copper conductor PVC FLRS insulated unsheathed cable in and incl PVC conduit with accessories existing pressed steel terminal boxes (sunk in wall) including new 3.00 mm thick plastic laminated sheet top cover with 1.50 Sqmm insulated unsheathed PVC covered copper conductor for common earth and connecting to earth dolly for :-

S&F 16 A DP ON/OFF Rotatory switch flameproof cast aluminum alloy LM 6 complete all a specified and as directed. Make- Baliga,sudhir.

M&L Flame proof exhaust fan 305 mm sweep 230 V complete all as specified and as directed.Make- Baliga,sudhir.

Cutting of hole on wall for exhaust fan fixing and making good surface on wall in existing type complete all as specified and as directed.

S & Fin LED Flameproof liight fitting 2 X 16 watt with diecast aluminum housing with heat resistant toughened glass with led tubelight fixture drivers,holders,connections complete all as specified and as directed.

M&L for sheet metal enclosures distribution board where MCB to be used with 200 Amps rated bus bar CL-IP-43 240 V, 8 way single pole & neutral link

M&L in replacement for MCB triple pole & neutral 63 Amps, 415 V

M&L in replacement for MCB single pole 16Amps, 240 V .

M&L in replacement for MCB single pole & neutral 32 Amps, 240 V .

Supplying, Laying, Jointing and testing of under ground cable XLPE insulated, 1100 volt grade heavy duty armoured with stranded aluminium conductor 4 core 16 sqmm laid in trenches/ duct/ pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and directed by Engr-in-Charge.

M & L in GI tubing Light grade 50mm incl all accessories for protection cable complete all as specified and directed in engr-in-charge

psj build solutions and company

KAMAL ENTERPRISES

Shri Electrical Enterprises