REPAIR MAINT OF INTERNAL WIRING INCLUDING SUB MAIN WIRING DBS BLDG SECURITY LIGHTS AND CONNECTED ITEMS IN POCKET 1 TO 4 AND PURKAZI UNDER GE ROORKEE

Amount

M & L for concealed Point wiring including replacing existing point wiring with 1.5 Sqmm (Nominal area) PVC insulated, unsheathed FRLS multi stranded copper conductor single core cable 1100 Volt grade drawn through and including PVC conduit of 20 mm dia ISI marked with complete accessories, including modular type galavanised iron steel sunken boxes suitable for modular type switches, sockets, also including PVC insulated and unsheathed single core multi stranded copper conductor cable of size 1.5 sqmm green in colour as earth continuity conductor connected to common earth dolly, including taking down of existing point wiring and their connected conduit, fittings & fixtures like switches, sockets, Ceiling rose, fan regulator etc and making good disturbed surface with white wash or any type distemper as per existing colour of building complete all as specified and directed for the following :- One light point controlled by one, one way modular type switch Note for Point wiring:- (i) The quoted rate is deemed to be include the price of GI sunken box suitable for modular type switches, sockets etc of any module size & shape. (ii) The quoted rate is also deemed to be include the rate of cover plate, blank plate of any type and any module.

All as per item No 1.00 above but One ceiling/Exhaust fan point controlled by one, one way modular type switch

All as per item No 1.00 above butOne 3/5 pin socket outlet 5 Amp on the same modular board with other switches.

All as per item No 1.00 above butOne 3/5 pin 5 Amps modular socket outlet on independent modular board.

All as per item No 1.00 above butOne bell/buzzer point controlled by one modular type bell push button

All as per item No 1.00 above butOne light point controlled by two two way switches

All as per item No 1.00 above but concealed wiring with 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed FRLS cable and 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed FRLS cable, green colour as earth continuity wire, controlled by one, one way 16 Amp modular switch.

Supply and fix modular type white colour switch 5/6 Amps one way, AC 230 volts in one modules complete all as specified and as directed.

Supply and fix modular type white colour 6 Amp 5 pin shuttered socket, 230 volts in 2 module complete all as specified and as directed.

Supply and fix modular type white colour shuttered socket 6/16 Amps 230 volts in 2 module complete all as specified and as directed.

Supply and fix modular type white colour switch 16 Amps, 230 volts in 1 module complete all as specified and as directed.

Supply and fix modular stepped type 4 Step Energy Saving electronic Fan Regulator suitable for one module, white colour AC 230 V, including connecting complete all as specified and as directed.

Supply and fix modular type bell push switch in one module 10 Amp AC 230 volts complete all as specified and as directed.

Supply and fix modular type two way switch switch in one module 10 Amp AC 230 volts complete all as specified and as directed.

Taking down old unserviceable copper/aluminium point wiring (light, fan, socket or power ponts) including conduit, fittings and fixtures such as switches, sockets, ceiling rose, pendant, fan regulators etc of any type and M&L for new point wiring with PVC insulated PVC unsheathed electric (FRLS) cable of size 1.5 Sqmm nominal cross sectional area, 1100 Volt grade, single core having multi stranded copper conductor with 1.5 Sqmm green colour PVC insulated unsheathed electric (FRLS) cable having multistranded copper conductor as earth wire connected to earth dolly by providing lugs including concealed GI sunken boxes suitable for switches/sockets etc with hylam sheet with glossy finish including necessary cutting for fixing switches, sockets, regulators etc, drawn through and including non metallic rigid PVC conduit (ISI marked) medium grade not less than 20mm dia with all conduit accessories in concealed wiring system including cutting chases in wall and making good in cement mortar (1:3) with all necessary surface finishes such as distempering etc to match the existing surfaces complete all as specified for the following:-

One light point controlled by one one way switch

One fan /exhaust fan point controlled by one one way switch

One bell/buzzer point controlled by one push button

One 3/5 pin socket outlet 5 Amp on the same board with other switches.

One 3/5 pin 5 Amps socket outlet on independent board.

One light point controlled by two two way switches

All as per Srl Item No 9.00 here-in-before but point wiring for 15 Amps 3/5 pin power socket with 2.5 Sqmm (nominal area) (FRLS) copper conductor including 1.5 Sqmm copper conductor green colour for earth continuity complete all as specified and directed.

Taking down old unserviceable copper/aluminium point wiring (light, fan, socket or power ponts) including fittings and fixtures such as switches, sockets, ceiling rose, pendant, fan regulators etc of any type and M&L for new point wiring with PVC insulated PVC unsheathed electric (FRLS) cable of size 1.5 Sqmm nominal cross sectional area, 1100 Volt grade, single core having multi stranded copper conductor with 1.5 Sqmm green colour PVC insulated unsheathed electric (FRLS) cable having multistranded copper conductor as earth wire connected to earth dolly by providing lugs drawn through existing conduit and sunken boxes but replacing hylam sheet with glossy finish including necessary cutting for fixing switches, sockets, regulators etc and making good disturbed surfaces to match the existing surfaces complete all as specified for the following:-

One light point controlled by one one way switch

One fan point controlled by one one way switch and fan regulator

One bell/buzzer point controlled by one push button

One 3/5 pin 5 Amps socket outlet on same board.

One 3/5 pin 5 Amps socket outlet on independent board.

All as per Srl Item No.11.00 here-in-before but point wiring for 15 Amps 3/5 pin power socket with 2.5 Sqmm (nominal area) (FRLS) copper conductor including 1.5 Sqmm copper conductor green colour for earth continuity drawn through in existing conduit complete all as specified and directed.

S&F switch piano flush type polycarbonate single pole one way 5 Amps complete all as specified and directed.

S&F switch piano flush type polycarbonate single pole one way 15 Amps complete all as specified and directed.

S&F switch piano flush type polycarbonate single pole two way 5 Amps complete all as specified and directed.

S&F socket outlet polycarbonate 2 in 1, 3 pin 5 Amps flush type complete all as specified and directed.

S&F socket outlet polycarbonate 2 in 1, 3 pin 5/15 Amps flush type complete all as specified and directed.

S&F bell push flush type 5 Amps complete all as specified and directed.

S&F electronic fan regulator 230 Volts, steped type (5 steps) socket type, hum free 100/300 watt complete all as specified and directed.

M&L for ceiling rose in polycarbonate 3 terminal brass flush type 6 Amps, 250 Volts, AC supply (ISI marked), fixed on & including 3 mm thick 75mm dia sunmica hylum plastic laminated round sheet complete all as specified and directed.

S&F lamp holders (metal ring) PVC / polycarbonate type with back plate, fixing on 3 mm thick sunmica hylum plastic laminated round sheet 75mm dia complete all as specified and directed.

Supply and fixing bell ding dong single pole 230 Volts, 50 Hz complete all as specified and directed.

S&F In replacement of old unserviceable light fittings LED tube light fitting 1x20 Watt Compact industrial batten box type with bipin holders connector block complete with all accessories internally prewired and incl connecting up three core single wire incl 01 no. 20 watt retrofit LED tube rod T8 polycarbonate to be fixed at any height of wall/ceiling complete all as specified and as directed.

S & F In replacement of old unserviceable light fittings LED tube light fitting 2x20 Watt (4 feet) industrial batten box type with bipin holders connector block complete with all accessories internally prewired and incl making fixing arrangement, suspended to ceiling with metal chain-02 Nos, 2 feet length, connecting up three core single wire incl 2x20 watt retrofit LED tube rod T8 polycarbonate to be fixed at any height of wall/ceiling complete all as specified and as directed.

S & F In replacement of old unserviceable integral batten LED tube light fitting 1x20 Watt LED luminaire comprise complete with all accessories internally prewired and incl connecting up 2 core single wire incl LED tube rod T5 complete all as specified and as directed.

S & F In replacement of old unserviceable LED tube light fitting 1x10 Watt industrial batten patti type with bipin holders connector block complete with all accessories internally prewired and incl connecting up three core single wire incl 10 watt integral LED tube rod T5 complete all as specified and as directed.

S & F In replacement of old unserviceable Building security light fitting versatile pressure die-cast aluminium with high power LED 25 W as light source IP66 Protection complete with LED 25 W 3000K including brackets made out of GI pipe light grade pipe bent to shape incl 02 Nos MS flat clamps incl nut bolts connection complete all as specified and as directed.

S & F in replacement of old unserviceable recesss mounting light fitting 1' x 1' of capacity 18 Watts powder coated white CRCA full glow suitable for 600 x 600mm POP false ceiling including making electrical connection from ceiling rose to light fitting complete all as specified and as directed.

S & F in replacement Recesss mounting ultra slim LED round panel light fitting 18 watts capacity plastic body suitable for ceiling cut out 210 mm including making hole for inserting fixture and electrical connection in existing ceiling complete all as specified and as directed.

S & F in replacement Surface mounting LED round down light fitting 12watts capacity die cast aluminium housing including making hole for inserting fixture and making electrical connection on existing surface complete all as specified and as directed.

S & F in replacement Surface mounting LED square down light fitting 12 watts capacity die cast aluminium housing including making hole for inserting fixture and making electrical connection on existing surface complete all as specified and as directed.

S & F in replacement of old unserviceable LED Post Top Lantern light fitting 35 watt capacity with transparent diffuser and fixing arrangement on GI Pipe light grade of dia 40 mm duly grouted on wall/brick pillar complete all as specified and directed at site and electrical connection from junction box to light fitting complete all as specified and as directed.

S & F in replacement of old unserviceable recesss mounting light fitting 2' x 2' of capacity 36 Watts powder coated white CRCA full glow suitable for 600 x600 mm POP false ceiling including making electrical connection from ceiling rose to light fitting complete all as specified and as directed.

S & F in replacement of old unserviceable LED Flood light fitting 50 watt capacity with SMD LED pressure die-cast aluminium housing with toughened glass and high power LEDs IP 66 protection, 3000K including making electrical connection from ceiling rose to light fitting complete all as specified and directed.

S & F in replacement of old unserviceable LED Highbay light fitting 100 watt capacity with PDC aluminum with reflector including making electrical connection from ceiling rose to light fitting complete all as specified and as directed.

Taking down old sub main wiring and M & L Sub main wiring with two runs of single core FRLS PVC insulated and unsheathed multistranded, copper conductor cable of size 4.0 sqmm LT, 1100V grade, down through and incl adequate sizes PVC non metallic conduit of 20mm/appropriate dia with accessories and fittings and one run of 4.0 sq mm single core multi stranded copper conductor cable as earth continuity conductor. Note:Two runs of cable one run of earth wire and one run of PVC non metallic conduit of 20mm/appropriate dia shall be measured as one run length, Cable required for connection to DBs, MCBs shall deemed to be incl and shall not be measured separately. Earth wire shall run inside the conduit pipe complete all as specified and as directed.

All as per item No-36 here in before but 6.00 Sqmm copper conductor and 6.0 Sqmm as earth continuity conductor complete all as specified and as directed.

All as per item No-36 here in before but 10.00 Sqmm copper conductor and 10.0 Sqmm as earth continuity conductor complete all as specified and as directed.

All as per Item No- 36 above but 2x4.0 sq. mm +1x4 sq. mm earth wire on existing surface / existing PVC conduit of dia not less then 20 mm complete all as specified and as directed.

All as per Item No- 36 above but 4x10.0 sq. mm+ 1x10 sq. mm earth wire on existing surface / existingPVC conduit of dia not less then 32 mm complete all as specified and as directed.

S & F In replacement of old unserviceable Distribution board (DB) made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 8 way IP 43 (double door) with 200 Amps rated copper bus bar neutral bar ,earth bar ,single pole and neutral 250 volts ,flush to wall complete all as specified and as directed.

S & F In replacement of old unserviceable Distribution board (DB) made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 4 way IP 43 (double door) with 200 Amps rated copper bus bar neutral bar ,earth bar ,flush to wall complete all as specified and directed.

S & f in replacement of unserviceable TPN DB- VTPN for independent mounting fixed on wall duly flush mounted, 4 way, IP 43, IK 09 with 200 Amp Bus bar double door complete all as specified and as directed.

S & F in replacement of unserviceable MCCB 100 Amp four pole, 415 volt, 25kA adjustable thermal and magnetic setting including necessary connection complete all as specified and directed.

S & F In replacement of old unserviceable MCBs single pole,6 to 32 Amp 240 volt C-curve 10 KA complete all as specified and as directed.

S & F In replacement of old unserviceable MCBs single pole and neutral, 6 to 32 Amp 240 volt C-curve 10 KA complete all as specified and as directed.

S & F In replacement of old unserviceable MCBs ISI marked 415 Volt, 50 Hz, four pole 63 Amps, breaking capacity 10 KA complete all as specified and as directed.

S & F In replacement Single pole and neutral enclosures with two pin and earth plug and socket complete with one single pole MCB of rating 20 Amps 240 volt grade complete all as specified and as directed.

Supply and fix Weather proof flat twin core cable aluminum conductor of size 6 Sqmm suitable for house service connection complete all as specified and as directed.

Supply and fix Weather proof flat twin core cable aluminum conductor of size 10 Sqmm suitable for house service connection complete all as specified and as directed.

Taking down existing earthing of any description and M&L for new earthing complete with galvanized steel plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to GI earthing wire 4mm dia size by means of GI bolts, nuts, check nuts and washers, earthing wire protected by GI pipe 20 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6) type C1 in chamber of size not less than 300x300x300mm (internal diamentions) with cover made of RCC (1:2:4), type B-1, 50mm thick, reinforced with 8 mm dia TMT bars @ 15 cm C/C both ways and angle iron 40X40X5mm frame etc duly painted with two coats of synthetic enamel paint over a coat of red oxided primer on exposed surfaces complete all as specified and directed by Engineer-in-Charge. Note: The unit rate includes earthing wire and protection pipe upto maximum 7.5 metre from earth plate, earth point / test point.

Supply and fix LED bulb 12 watts with B-22 base operated on single phase AC supply complete as specified and directed.

Supply and fix LED bulb 9 watts with B-22 base operated on single phase AC supply complete all as specified and as directed.

Supply and fixing Energy efficient Exhaust fan 200mm sweep, PVC body, operating on single phase 230 Volt and including opening suitable for fixing exhaust fan in round/square shape and finished the same to existing surface finish complete all as specified and directed.

Supply and fixing Energy efficient Exhaust fan 250mm sweep, PVC body, operating on single phase 230 Volt and including opening suitable for fixing exhaust fan in round/square shape and finished the same to existing surface finishcomplete all as specified and directed.

Supply and fixing LED PLL of capacity 18 watts, 4 pin complete all as specified and as directed.

Supply and fix Weather proof flat twin core cable aluminum conductor of size 4 Sqmm suitable for house service connection complete all as specified and as directed.

All as per item No 59 above but of size twin core 6 Sqmm complete all as specified and as directed.

All as per item No 59 above but of size twin core 10 Sqmm complete all as specified and as directed.

S&F in replacement of three phase Kwh meter with LCD display, class I, 10-100 Amps rating with optical port base mounting with box and meter PVC seal, AC 240 Volt, 50 HZ, including mounting on wooden box of suitable size and making connection complete all as specified and as directed.

S&F in replacement of single phase Kwh meter with LCD display, class I, 10-60 Amps rating with optical port base mounting with box and meter PVC seal,AC 240 Volt, 50 HZ, including mounting on wooden box of suitable size and making connection complete all as specified and as directed.

S & F in replacement of old unserviceable Post Top Lantern light fitting of capacity 1x7/8 Watts with B-22 base LED lamp transparent polycarbonate diffuser and fixing arrangement of GI Pipe all as specified and directed at site and electrical connection from junction box to light fitting complete all as specified and as directed.

S&F decorative post top lantern luminaries fitting LED type 40watts suitable for mounted on gate pillar for 360° indirect light with IP 65 protection, glare-free and better uniformity light, including provision of GI pipe light grade of suitable dia and suitable length grouted in pillar for mounting fitting complete all as specified and as directed.

S&F inreplacement of Designed LED post top lantern with fully cast Aluminium body finished with polyurethane paint (with prior treatments) with acrylic with window cover. powered with high power LEDs as light sourse, total length 819mm (32.25 inches) & Max Breadth 381 mm (15 inches) fixing in existing GI pipe complete all as directed by Engineer-in-Charge. Model of Mepro CAT No-PTLD-0002 for model, including 3 core strandard copper wire 2.5 Sqmm complete all as specified and as directed.

S&F Designed LED post top lantern 50 watts with aluminium enclosure, powered with high power LEDs as light sourse and die cast heat sink exhibits classic victorian look with symetrical light with IP 65 protection, glare-free and better uniformity light, fixing in existing GI pipe complete all as specified and as directed.

Labour only for attending repairing Day to day complaints of internal electrification and repairing in situ by skilled electrician along with a helper and making functional faulty points i.e. fixing necessary electric fittings (switch, socket, holder, Tube light, bell regulator etc.) complete all as specied and directed at site. Note: Point wiring will be measured and paid separately under appropriate item, fixing in repairs will be measured in appropriate. Note: (i) The trade men shall be ITI qualified with minimum 3 years experience and equipped with all necessary electrician tool kit, the rate of the same shall be include in the quoting rates. (ii) Trade men shall report at complaint cell at 0930 hr. (iii) Replacement of electrical fittings/fixture will be measured 'supply only' items on the same BOQ. (iv) In case any maintenance/ complaint informed to the contractor by means of telephonic or verbal or on complaints slip and not been rectified within 48 hours then contractor is penalized of Rs 200 per complaint and the same shall be recovered from his RAR.

Supply only Switch piano flush type single pole 5 Amps one way, 230V complete all as specified and as directed.

Supply only Switch piano flush type polycarbonate single pole 15 Amps one way, 230V complete all as specified and as directed.

Supply only Socket outlet polycarbonate 2 in 1, 3 pin 5 Amps flush type complete all as specified and as directed.

Supply only Socket out let polycarbonate 15 Amps one way, 230V complete all as specified and as directed.

Supply only bell push flush type 5 Amps one way 230 volt complete all as specified and as directed.

Supply only ceiling rose 3 phase /PVC/polycarbonate insulated body complete all as specified and as directed.

Supply only Fan regulator, 5 step type single module one way, 230V complete all as specified and as directed.

Supply only Fan condenser 2.5 mfd complete all as specified and directed.

Supply only lamp holder PVC poly carbonate back plate suitable for batten complete all as specified and as directed.

Supply only tube light fittings 18/20watt surface type and wall mounted LED batten complete all as specified and as directed.

Supply and fix in replacement Retrofit T8 tube Polycarbonate 4 fit 20 W LED Rod , 240 volt complete all as specified and as directed.

Supply only modular switch 5/6 Amps 1 way 1 module complete all as specified and as directed.

Supply only modular socket 5/6 Amps 1 way 2 module complete all as specified and as directed.

Supply only modular switch 16 Amps 1 way 1 module complete all as specified and as directed.

Supply only modular socket 16 Amps 1 way 2 module complete all as specified and as directed.

Supply only modular fan regulator 2 module complete all as specified and as directed.

Sup[ly only bell ding dong single pole complete all as specified and as directed.

Supply only single pole (SP) MCB 6-32Amp 'C' series 10 KA, IP 20 complete all as specified and as directed.

Supply only single pole neutral (SPN) MCB 6-32Amp 'C' series 10 KA, IP 20 complete all as specified and as directed.

Supply only self adhesive PVC insulation electrical tape, 0.13mm x19mmx25mtr long, as per electrical ISI, Per roll 10 Nos in each packet complete all as specified and as directed.

Supply only LED bed side lamp 6/8 watt fixed on existing wall including making electrical connection complete all as specified and as directed.

Supply only metal clad plug and socket without enclosure, 20 Amp capacity, 230 Volts, complete all as specified and directed,

SHUBH BUILDERS

A ONE BUILDERS AND ENGINEERS

PARADISE INFRA POWER COMPANY

NITHYA INFRATECH