CONSTRUCTION OF URBAN HEALTH AND WELLNESS CENTER AT F.P.NO. 319 OF TPS NO. 29 (NARANPURA) IN NARANPURA WARD, WEST ZONE, AHMEDABAD (Re-Tender)

Name of Work:- CONSTRUCTION OF URBAN HEALTH AND WELLNESS CENTER AT F.P.NO. 319 OF TPS

NO. 29 (NARANPURA) IN NARANPURA WARD WEST ZONE, AHMEDABAD

Unit Rate Amount

Civil Work Estimate

1 Demolition & Dismantling work

Demolition of RCC work using Hydra Breacker

including stacking of servicable materials and disposal

a 2.00 of unservicable materials with all lead and lift.Removal

Of Existing Building Foundation and Super Structure If

Any. 1047.38 Cu.M.

Demolition of Brick work and stone masonry including

stacking of serviceable materials and disposal of

b 3.00 unserviceable materials with all lead and lift.(ii) In

Cement Mortar.Removal Of Existing Building

Foundation and Super Structure If Any. 544.95 Cu.M.

Dismentaling of sheet roofing including ridges, Hips,

Valleys, Gutters etc. stacking of serviceable materials

and disposal of unserviceable materials with all lead

i 3.00 (i) G.I.sheet roofing. 47.25 Sq.mt

ii 3.00 (ii) A.C. sheet roofing. 53.55 sq.mt

Dismentling steel work including distempering and

d 100.00 stacking the materials with all lead and lift.

Dismentling doors, windows, ventilators etc. (wood or

steel) shutters including chowkhats architraves, hold

e 2.00 fasts and other attachment etc. complete and stacking

them with in all lead and lift. (i)Notexceeding 3 Sq.M. in

area. 185.85 Each

Removing & Scrapping of Old deteriorated Plaster of

any thickness from Masonary / R.C.C. member

including stacking of serviceable material & disposal of

un serviceable from site of work with all lead & lift. 19.38 Sq.M.

Dismentaling any type tiled of stone floors / Paver

Block laid in mortar including stacking of serviceable

materilas and disposal of unserviceable materials with

all lead and lift. 47.25 Sq.M.

2 Excavation for foundation including sorting out

stacking of useful material & disposing of excavated

stuff upto 50 mt. lead. Loose & Soft soil.Excexuted

With Mechanical Effort

a 336 up to 1.5 mt. depth 115.92 Cu.M.

b 212 1.5 to 3.0 mt. depth. 128.52 Cu.M.

c 48 3.0 to 5.0 mt. depth 141.11 Cu.M.

d 2200.00 Add extra for Disposing off the excavated stuff of

above items for lead of (A) 50 m to 100 m 17.28 Cu.M.

e 500.00 Add extra for Disposing off the excavated stuff of

above items for lead of (B) 100 m to 200 m 34.56 Cu.M.

f Providing and installing cast in situ single under

reamed piles of specified diameter and length below

pile cap, excluding the cost of Concrete, steel

reinforcement but including the cost of boring with

bentonite solution and the length of the pile to be

embedded in pile cap etc. all complete. (Length of pile

for payment shall be measured upto to the bottom of

i 10.00 400 mm dia. Piles 638.83 Rmt.

ii 10.00 450 mm dia. Piles 705.03 Rmt.

g Extra over single under ream for providing additional

bulbs in under reamed piles, under specified diameter

excluding the cost of Concrete, steel reinforcement

(only the nos. of extra bulbs are to be paid).

t 1.00 400 mm dia. Piles 813.05 Each

ii 1.00 450 mm dia. Piles 1103.43 Each

3a 1 Provdg. & laying cement concrete 1:5:10 (1 cement :

course sand : 10 hand broken aggregates 40 mm

nominal size) and curing complete, excluding cost of

form work in foundation & Plinth.

3b Provdg. & laying cement concrete 1:3:6 (1 cement :

coarse sand : 6 hand broken stone aggregates 40 mm

nominal size) and curing complete excluding cost of

51.00 (A) Foundation and plinth 2976 Cu.M.

3c 18 Supplying of graded hand brocken stone size of 90 mm

to 127 mm at site (Rubble or Spoul)

3d 80 Labour charges for spreading the spouls 90 mm to

mm thick layer good earth filling in voids correcting the

grade & camber comp. with rolling, watering, incl.

preparing thesurface by brushing for removing all loose

or dirts ect.comp. 16.07 Sq.mt.

4 2.00 Provdg. & laying cement concrete 1:4:8 (1 cement :

coarse sand : 8 hand broken stone aggregates 40 mm

nominal size) and curing complete excluding cost of

form work in foundation& plinth. 2653.67 Cu.M.

5 800 Filling available excavated earth (excluding rock) in

trenches, plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidation each

deposited layer by ramming and watering. 129.1 Cu.M.

6 Conveyance charges of earth, lime, murrum, building

rubbish, manure, garbage, sludge, excavated rock, fly ash,

aggregate of any kind etc. comp.

a 50.00 Conveyance charges upto 1 km 46.63 Cmt

b 50.00 Conveyance charges upto 2 km 60.69 Cmt

c 300.00 Conveyance charges upto 5 km 100.44 Cmt

d 50.00 Conveyance charges upto 6 km 109.7 Cmt

e 50.00 Conveyance charges upto 7 km 118.96 Cmt

f 300.00 Conveyance charges Above 7 km 128.22 Cmt

7a 10 Filling in plinth with sand under floors including

watering, ramming, consolidating, compacting and

dressing etc. completed.

7b 53.00 Filling in foundation and plinth with murrum or selected

soil in layers of 20 cm. thickness including watering,

ramming and consolidating etc. Complete.

8 Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg/Sq. cm.

in cement mortar 1:6 (1 cement : 6 fine sand)

conventional brick

a 46 (a) in foundation & Plinth 3981.21 Cu.M.

b 60.00 Super structure Upto Floor Two Level

c 2.00 Super structure Above Floor Two Level

9 I.Half brick masonry in common burnt clay building

bricks having crushing strength note less than

Kg/Sq. Cm. in cement mortar 1:4 (1 cement : 4 coarse

sand) using conventional brick in Super structure upto

floor Four level

a 42.00 All Floor Level 646.7 Sq.M.

10.1 Providing and laying controlled cement concrete of M-

25 Grade and curing complete, Excluding the cost of

form work, Scaffolding, cost of reinforcement for

reinforced concrete work For any Height up to any

a 12.00 Foundations,Raft,Footings,Mass concrete 4238.04 Cu.M.

b1 11.00 RCC Retaining wall at All Floor 4519.88 Cu.M.

c1 Tie-Beam, Lintel , Beam- Bracket, Stair Case &

Landing, Coping ,Slab, balcony, weather shed, loft

8.00 any cantilever etc All Floor 4496.07 Cu.M.

d1 3.00 Columns,Pillars, posts and struts at All Floor 4593.91 Cu.M.

10.2 Providing and laying controlled cement concrete of M-

20 Grade and curing complete, Excluding the cost of

form work, Scaffolding, cost of reinforcement for

reinforced concrete work For any Height up to Floor

a 1.00 Foundations,Raft,Footings,Mass concrete 3977.88 Cu.M.

b1 5.00 Tie Beam , Lintel , Beam- Bracket , Coping ,landing,

Slab, balcony, weather shed, loft , any cantilever etc at

All Floor 4460.36 Cu.M.

c1 2.00 Column at All Floor 4558.2 Cu.M.

d1 1.00 Stair Case All Floor 5418.91 Cu.M.

Providing and laying in position Ready Mixed M250

grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix

manufactured in fully automatic batching plant and

transported to site of work in transit mixer for all lead

having continuous agitated mixer, manufactured as per

mix design of specified grade for reinforced cement

concrete work including pumping of R.M.C. from transit

mixer to site of laying with all lead and lift, excluding

the cost of centering shuttering finishing and

reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to

accelerate/ retard setting of concrete, improve

workability without impairing strength and durability as

per direction of the Engineer - in charge. Without Fly

Ash (Min cement level as per latest IS 456 shall be

maintained) (Cement level 450 kg )

Providing and laying in position Ready Mixed M200

grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix

manufactured in fully automatic batching plant and

transported to site of work in transit mixer for all lead

having continuous agitated mixer, manufactured as per

mix design of specified grade for reinforced cement

concrete work including pumping of R.M.C. from transit

mixer to site of laying with all lead and lift, excluding

the cost of centering shuttering finishing and

reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to

accelerate/ retard setting of concrete, improve

workability without impairing strength and durability as

per direction of the Engineer - in charge. Without Fly

Ash (Min cement level as per latest IS 456 shall be

maintained) (Cement level 400 kg )

10.5 Drilling suitable holes in reinforced or plain cement

concrete with power driven drill machine to a minimum

depth of 80mm upto 250mm in RCC beams, lintels,

columns and slabs to introduce steel bars for

sunshades/balconies including fixing the steel bars in

position using Hilti Chemical HY200-R but excluding

the cost of reinforcement, all complete as per direction

of Engineer-In-Charge.

a 20.00 8 mm Dia in 80 mm Deep & 12 mm Dia Drilling 183.52 Each

b 20.00 10 mm Dia in 100 mm Deep & 14 mm Dia Drilling 263.66 Each

c 10.00 12 mm Dia in 120 mm Deep & 16 mm Dia Drilling 343.80 Each

d 5.00 16 mm Dia in 160 mm Deep & 20 mm Dia Drilling 608.63 Each

e 5.00 20 mm Dia in 200 mm Deep & 25 mm Dia Drilling 1024.44 Each

f 5.00 25 mm Dia in 250 mm Deep & 32 mm Dia Drilling 1938.54 Each

11 Providing and laying controlled cement concrete 1:2:4(

1cement : 2 coarse sand : 4 Graded stone aggregate

20 mm nominal size ) and curing complete, Excluding

the cost of form work and reinforcement for reinforced

concrete work in:

a 1.00 Foundations, footings, base of columns,grade slab

and mass concrete. 3923.53 Cu.M.

b 1 slab, landing shelves, Balconies, lintels, beams,

girders, and cantilever, up to aany floor level. 4012.47 Cu.M.

75.00 P/A Trimix with dewatering machine and floater

c machine on constructed R.C.C. work incl. cost of

machine and labour etc. comp. as directed. 54 Sq.mt

d 25.00 Making 15 mm Groove in R.C.C work on road and

filling it with poly sulfied selant and finished it good incl.

all labour charges etc. comp. as directed 30 Rmt

4.00 Providing and laying and fixing 25 mm thick expansion

joint by hydrocell semi rigid UV resistance with high

e performance laminated closed cell polythene foam joint

filler in sheet foam as directed, etc. complete.

12 Providing form work in ordinary timber planking so as

to give a rough finish including centering, shuttering,

strutting and propping etc. height of propping and

centering below supporting floor to celling not

exceeding 4 M & removal of the same for in situ

reinforced or plain concrete work in

a 103.00 (A) Foundation, footings, bases of columns etc. and

mass concrete. 171.68 Smt

b 114.00 (B) Flat surface such as soffits of slabs, landing and

the like 252 Smt

c 100.00 (C) Vertical surfaces such as walls (any thickness)

partitions. 229.95 Smt

(D) Columns, pillars, posts & struts.

d 172.00 (1) Square, rectangular, polygonal in plan 297.68 Smt

e 2.00 (2) Circular or curved in plan. 422.1 Smt

f 245.00 (H) (1) Sides and soffits of beam, haunchings

cantilevers, girders, bressumers, Coping and lintels not

exceeding 1 M in depth. 192.15 Smt

g 2.00 (2) Sides and soffits of beam, haunchings cantilevers,

girders, bressumers and lintels exceeding 1 M in depth.

h 7.00 (L) chullah hoops, weather sheds, chhajas, carbels etc

including edges. 155.78 Smt

i 2.00 (M) Staircase with-sloping or stepped soffits incl. risers

& strings excluding landing. 242.55 Smt

j 10.00 Extra for additional height of propping and centering

where the height of propping and centering exceeds

.O M between supporting floor to ceiling including

temporary brick or stone pillars for supporting as

required. (i)Height more than 4.0 M.and upto 5.0 M.

13 Providing T.M.T Fe 500D bar reinforcement for R.C.C.

work including bending, binding and placing in position

complete up to any floor level..

a 12445.0 All Floor Level 75.46 Kg.

14 7.00 Providing and laying polished Kota stone slab

(Polished / River Finish, Green colour ) flooring over

mm. (average) thick base of cement mortar 1:6 (1

cement : 6 coarse sand) or lime mortar 1:1.5 laid over

and joined with grey cement slurry including rubbing

and polishing complete.25 mm th.

15 14.00 Providing and laying polished Kota stone slab 25 mm.

thick in Platform ,Riser of Stair , Skirting, Tread , dado

and pillars laid on 10 mm. thick cement mortar 1:3 (1

cement : 3 coarse sand) jointed with grey cement slurry

including rubbing and polishing and MAking groove

where it is Required etc. compl

16 2.00 Providing and laying white/Colur glazed tiles 6 mm

thick in flooring treads of steps and landing laid on a

bed of 12 mm thick cement mortar 1:3 (1 cement :

coarse sand) finished with flush pointing in white

cement. 908.17 Sq. M.

17 86.00 Providing and layingWhite / Colour glazed tiles of size

600 mmx300mm x 8 mm / 300 mmx 450mm x 8 mm in

skirting, risers of steps, Floor and dedo on 10 mm.

thick cement plaster 1:3 (1 cement : 3 coarse sand)

and jointed with white cement slurry. 1426.95 Sq. M.

18 1.00 Providing and laying marble stone slab flooring over

mm. (Average) base of cement mortar 1:6 (1 cement:

coarse sand) or L.M. 1:1.5 laid and jointed with grey

cement slurry including rubbing and polishing

complete: (A) Marble slab 25 mm. thick.

19 65.0 Providing and laying Vitrified tiles 8 to 10 mm thick

24'' x 24'' in flooring treads of steps and landing laid on

a bed of 12mm thick cement mortar 1:3 (1-cement : 3-

coarse sand) finishing with flush pointing in white

cement. 1062.5 Sq. M.

19b 124.0 Providing and laying Vitrified tiles 8 to 10 mm thick

24'' x 24'' in skrting risers of steps and dedo on 10mm

thick cement plaster 1:3 (1cement : 3-coarse sand) and

jointed with white cement slurry 1130.15 Sq. M.

20 12.0 Providing and laying Ceramics tiles 6 to 8 mm thick

in flooring, treads of steps, landing and dedo on

mm. thick cement plaster 1:3 (1 cement : 3 coarse

sand) and jointed with white cement slurry. 960.47 Sq. M.

21 40.00 Providing & Laying 18 mm thick Mirror polish granite

For flooring , counter , stair riser , tread , skirting , dedo

, Jambs , Seating etc. machine cut or chiselled on bed

of cement mortar 1:1 pointing with neat cement slurry

incl. moulding, Making grooves where it is required etc.

comp. as per instruction of engineer in charge.

22a Provdg. 20 mm. thick Finish / Mala cement plaster in

single coat on fair side of brick / concrete walls for

interior plastering upto any Floor level and finished

even and smooth in C.M.1:4.

i 264.00 All Floor Level 190.58 Sq.M.

b Provdg. 20 mm. thick Finish / Mala cement plaster in

single coat plastering on ceilings, Beam side and sofits

of stairs upto any Floor level and finished even and

smooth in C.M.1:4.

i 97.00 All Floor Level 215.15 Sq.M.

c 32.00 Providing & fixing 23 cm wide chicken mesh jali with

nails & then application of 15 mm plaster on R.C.C. &

masonary joints as per dir. of engg. In charge.

d 20.00 Providing and mixing water proofing materials in

cement mortar in proportion recommended by the

manufacturer. etc. comp. as per instruction of engineer Per Bag

in charge. of 50 Kg

23a 214.00 Providing 20 mm th. Double coat Sand face / Mala

Cement Plaster on Walls upto any Height Above

Ground level consisting of 12 mm th. Backing coat of

C.M. 1:3 ( 1 cement : 3 Ssand ) & 8 mm th. Finishing

coat of C.M. 1:1 ( 1 cement : 1 sand ) ets. Complete.

24a 10.00 White / Color washing with lime on undecorated wall

surfaces (two coats) to give an even shade including

thoroughly brooming the surface to remove all dirt, dust

mortar drops and other foreign matter.

24b 155.00 Providing & Applying 3 mm thick External Wall Rustic

Type Texture as per Design & Make as Approved by

Consultants / Engineer in Charge. Work Includes All

Necessary Scaffolding Work upto Any Height.

24 c 270.00 Finishing walls with Acrylic Smooth exterior paint of

required shade :New work (Two or more coat applied

@ 1.67 ltr/10 sqm over and including priming coat of

exterior primer applied @ 2.20 kg/10 sqm)

24d 5.00 P./L. METALIC HERITAGE SURFACE TEXTURE

Providing and fixing of HERITAGE textured

homogeneous wall finishing system from BAKELITE

HYLAM LTD or equivalent make consisting of a two

component system of (25 kgs per Pack) made of 92%

silica particles coated with fade resistant pigments,

100% acrylic polymer bonding agent (5kgs per pack)

with the applied thickness of the coating being between

0.8mm-1.2mm to be applied on acured, smooth level

plaster without keying, as per the shades/combinations

approved, as per the manufacturer directions, for

usages, tobe applied by an approved applicator of the

manufacturer, as per the directions / supervision of the

engineers in charge, all complete. Includes All

Necessary Scaffolding Work upto Any Height.

25a 45.00 Wall Painting (two coats) with plastic emulsion / Oil

paint of approved brand and manufacture and of shade

required on undecorated wall surfaces to give an even

shade, over and including a priming coat with alkali

resistance primer of approved brand and manufacture

after thoroughly brushing the surface free from mortar

droppings, and other foreign matter and also including

preparing the surface even and sand -papered smooth

b 45.00 Extra over above item for every subsequent coat of of

wall painting with plastic emulsion / Oil paint of

approved brand.

c 45.00 Applying two coats of Birla (white cement based) or

Asian (acrylic lapy-putty) or equivalent & two coats of

primer of approved brand and manufacture on new wall

surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth.

26 Providing & Laying & Jointing glazed stoneware pipes

incl. excavation up to 2.0 mt.,refilling, trasporting the

pipe to work site, unloading, lowering in trenches,

laying and jointing the pipes in c.m. 1:1 incl. all jointing

materials such as cement, sand, hemp, bitumen as

dire. testing the pipe line to a head of 1.5 mt. and

hydraulic test as dire incl. watering trenches, spreading

, and carting away of surplus earth within 100 mt.lead

as dire. etc. comp.

a 30.00 23 cm dia. 344.64 Rmt

Providing & Laying & Jointing glazed stoneware pipes

incl. excavation up to 2.0 mt.,refilling, trasporting the

pipe to work site, unloading, lowering in trenches,

laying and jointing the pipes in c.m. 1:1 incl. all jointing

materials such as cement, sand, hemp, bitumen as

dire. testing the pipe line to a head of 1.5 mt. and

hydraulic test as dire incl. watering trenches, spreading

, and carting away of surplus earth within 100 mt.lead

as dire. etc. comp.

b 10.00 15 cm dia 211.05 Rmt

c 6.00 10 cm dia. 288.23 Rmt

27 4.00 Constructing brick masonry chamber for under ground

C.I. Inspection chamber and bends with bricks having

croshing strength not less than 35 Kg. Cm2 in C.M. 1:5

C.I. cover with frame (Lightduty) 455mm x 610 mm

intenal dimensions total weight of cover with frame to

be not less than 38 Kg. (Wt. of cover 23Kg.) and Wt. of

frame 15Kg.) (R.C.C.top slab with 1:2:4 mix (1-

cement:2-coarse sand:4-graded stone aggregate

20mm size) foundation concrete 1:5:10 inside plaster

15 mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed

concrete etc. complete.(i) Inside dimensions 455 mm x

610 mm and up to 850 mm deep

28 a 2.00 Constructing Manhole with R.C.C. top slab in 1:2:4mix

(1-cement: 2-coarse sand:4-graded stone aggregate

20 mm nominal size) foundation concrete 1:3:6 mix (1-

cement:3-coarse sand:6-Brick bats 40+50mm size)

inside plastering 15mm thick with Cement Mortar 1:5 (1-

Cement:5-coarse sand) finished with a floating coat of

neat cement and making channels in cement concrete

1:2:4 mix (1-Cement:2 -Coarse sand:4-stone aggregate

20 mm nominal size) finished smooth complete

including curing and festing (i) Inside size 900mm x

1200mm and up to 1.5M. deep including C.I. cover with

frame size 560 mm diameter total weight of cover and

frame to be not less than 128kgs. (Wt. of cover 64Kg.

and Wt. of frame 64Kg.) (A) With 230 mm thick walls of

brick masonry using brick having crushing strength not

less than 35Kg./Sq.cm. in Cement Mortar 1:5 (1-

Cement: 5-Coarse sand) (2)B type depth up to

29a 1.00 Providing and fixing white vitreous china flat back or wall

corner type lipped front urinal basin of 340x280x470 mm

sizes respectively with standard flush pipe, Waster Pipe,

Waste Coupling, PVc Connection and G.I clamps complete,

including painting of fittings and brackets, cutting and

making good the walls and floors wherever required : Cera

Model No. S4020103 or Equivalent 3344.35 No.

b 4.00 Providing and Fixing of C.P. Brass BIB Cock of 15 mm

Dia of Jaquar make florentine series model no. 5047n

or equivalent make with all necessary fittings. as

approved by Engineer - in - charge., 1564.17 No.

c 4.00 Providing and fixing brass screw down Angle stop

tap.(A) 15mm dia. Of Jaquar make florentine series

modelno. 5053n or equivalent make with all necessary

fittings. as approved by Engineer - in - charge.,

d 1.00 Providing and fixing C.P. brass shower rose with 15mm

or 20mm inlet Shower Arm.(A) 100mm dia. Each

e 4.00 Provding and Fixing of autoclosing pressmatic pillar

cock / bib cock with all necessary fittings of Polished

Bright Chrome Finish of Jaquar make model no.

031L65 or equivalent make as approved by Engineer in

Charge. Rate including of cost of labour, material etc.

in complete manner. 3280.52 No.

f 2.00 Providing and Fixing of C.P. Brass Two Way Bib Cock

of 15 mm Dia of Jaquar make model no. 041kn or

equivalent make approved make with all necessary

fittings. as approved by Engineer - in - charge., 1411.58 No.

g 1.00 Providing and Fixing of C.P. Brass urinal Valve Auto

Closing System With Full Built in Control Cock & Wall

Flange of 15 mm Dia of Jaquar make model no.

or equivalent make approved make with all necessary

fittings. as approved by Engineer - in - charge., 2568.08 No.

30 4.00 Provdg. & laying S.W. Gully trap with C.I. garting brick

masonry chamber & water tight C.I. cover with frame

of 300 mm x 300 mm size ( inside) with standard

weight. sqare mouth trap size 150 x100 mm P trap

31 2000.00 Providing erecting and fixing double coated ISI water

tank of required capacity each with all necessary

fittings and connection etc. complete on terrace

32 10.00 Extra rate over item of excavation of earth for

excavation of asphalt pavement/RCC of thickness up

to 0.20 meter including demolishing the asphalt carpet,

metal, soiling / cutting Reinforcement etc.comp. with

stacking the material as directed.-up to 0.20 meter

thickness 71.43 Sq.M.

33 5.00 P/F PVC / C.I. (span) nahni trap and all of the following

nominal dia of self cleanising design with C.I.Screw

down or hinged greeting inclusive cost of cutting and

making good the walls and floors for drain 75 mm dia.

etc. comp. 552.83 No.

34a Provdg. And fixing to wall, ceiling & floor in true line

and level UPVC pipe Schedule- 40 of make as

approved by engg. incharge. pipe shall be fix on wall

with the help of clamp at every twi meter center to

center of shall be concealed as directed in cluding

neccesarry fitting etc. in cluding testing of pipe and

jointd and fixing the same with adhesive solvent

including cost of all materials of following nominal bore

iii 3.00 32 mm 117.97 Rmt

34b Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc.

iii 5.00 25 mm 247.25 Rmt

35 Provdg. And fixing to wall ,ceiling and floor 10.00 kg.

F/Sq.Cm2 working pressure polythelene pipes of the

following outside diameter, low, density, complete with

special flange compression type fittings, wall clips etc.

making good wall ceiling and floor.

b 10.00 75mm dia 274.68 Rmt

c 25.00 110 mm dia 332.91 Rmt

36 1.00 Providing and fixing water closet squatting Pan ( Indian

type W.C. Pan) size 580mm (A)VitreousChina. (I)Long

pattern = White colour with Trap and Pair of Foot Rest

37a 2.00 Providing and fixing white vitreous china extended wall

mounting water closet of Cera Make Campbell Model

With Ceramic Flush Tank Or Equivalent Model With

EWC Soft Close Seat Cover, Chair Bracket, nuts,

bolts and gasket etc complete. 19176.06 No.

b Providing and fixing chromium plated brass half trun

flush cock of approved quality including fixing in pipe

line etc. complete.

c 2.00 Providing and fixing Health Faucet of Jaquar make model

no. 573 oe equivalent make as approved by engg. In charge

with flexible tube upto 1 metre long etc. complete. 1543.36 No.

38a 1.00 Providing and fixing 24"x18"x8" Carysil Elegance or

Equivalent Make of Single Bowl Sink S.S. Matt Finish With

Waste Coupling, Waste Pipe,etc. cutting and making good

the walls wherever required. 7960.49 No.

b 3.00 Providing and fixing Under counter Wash basine including

15 mm C.P. Brass Pillar tap, 32 mm C.P. Brass Waste of

Standard make, Cutting & Making good the wall / granite

Wherever Required in White Color : Model S2030101 of

Cera Clair Series or Equivalent make Waash basine of size :

c 1.00 Providing and fixing white Wash basin with single hole for 1400.18 No.

pillar tap,with C.I. Or M.S. bracket painted white including

cutting holes and making good the same but excluding

fittings (A) vitreous china Flat back washbasin 550mm x

400mm size in white color

d 1.00 Providing and fixing C.P.brass waste for wash basin or sink. 67.24 No.

e 1.00 Providing and fixing M.I. fisher union for wash basin or sink. 77.97 No.

39a 3.00 Provdg. & fixing 600mm x 450 mm Bevelled edge

mirror of superior glass mounted of .6 mm th. A.C.

sheet or plywood sheet and fixed to wooden pluge with

C.P. brass screws and washers. 825.48 No.

40 2.00 Provdg. & fixing C.P..Brass towal rail complete with

C.P. brass brackets fixed to wooden plugs with C.P.

Brass screws.(600 mmx 20 mm size)

41 Providing and fixing ball valve (brass) of approved

quality, High or low pressure, with plastic floats

ii 1.00 20 mm dia 1099.94 No.

iii 6.00 25 mm dia 1552.93 No.

iv 1.00 40 mm dia 3312.60 No.

42a Providing and fixing Full Way valve (HEX) with wheel

of approved quality :

i 1.00 15 mm Full Way valve (HEX) 1461.17 No.

ii 1.00 20 mm Full Way valve (HEX) 1924.61 No.

iii 2.00 25 mm Full Way valve (HEX) 2535.55 No.

iv 1.00 32 mm Full Way valve (HEX) 3377.64 No.

v 2.00 40 mm Full Way valve (HEX) 4661.10 No.

vi 1.00 50 mm Full Way valve (HEX) 6675.14 No.

43a 1.00 Providing and Fixing of C.P.Brass Pillar Cock of 15 mm

Dia of Jaquar make model no. 5011n or equivalent

make with all necessary fittings. as approved by

Engineer - in - charge., 1725.21 No.

b 2.00 Providing and Fixing of swan neck Sink Tap Wall

mount/Plateform Mount Jaquar make model no. 5357n

or equivalent make. Rate shall Including of cost of

labour, material, necessary fittings etc. 2468.41 No.

c 1.00 Providing fixing of SS grab bar of Jaquar make model

no. 1507 or equivalent make with all hardwares for

Physically Handicap toilet. 1937.24 No.

44a 90.00 Providing and laying integral cement based water

proofing treatment including preparation of surface as

required for treatment of roofs, balconies, terraces etc

consisting of following operations: 1150.48 Sq.M.

(a) Applying a slurry coat of neat cement using

kg/sqm of cement admixed with water proofing

compound conforming to IS. 2645 and approved by

Engineer-in-charge over the RCC slab including

adjoining walls upto 300 mm height including cleaning

the surface before treatment.

(b) Laying brick bats with mortar using broken

bricks/brick bats 25 mm to 115 mm size with 50% of

cement mortar 1:5 (1 cement : 5 coarse sand) admixed

with water proofing compound conforming to IS :

and approved by Engineer-in-charge over 20 mm thick

layer of cement mortar of mix 1:5 (1 cement :5 coarse

sand ) admixed with water proofing compound

conforming to IS : 2645 and approved by Engineer-in-

charge to required slope and treating similarly the

adjoining walls upto 300 mm height including rounding

of junctions of walls and slabs.

(c) After two days of proper curing applying a second

coat of cement slurry using 2.75 kg/ sqm of cement

admixed with water proofing compound conforming to

IS : 2645 and approved by Engineerin- charge.

(d) Finishing the surface with 20 mm thick jointless

cement mortar of mix 1:4 (1 cement :4 coarse sand)

admixed with water proofing compound conforming to

IS : 2645 and approved by Engineerin- charge

(e) The whole terrace so finished shall be flooded with

water for a minimum period of two weeks for curing

and for final test.“All above operations to be done in

order and as directed and specified by the Engineer-in-

Charge :and shall be guaranteed for minimum period of

10 years after handing over the completed building by

the main contractor to be finished as directed. Stamp

paper guarantee 10 years to be furnished before

receiving any payment from the client.

With average thickness of 120 mm and minimum

thickness at khurra as 65 mm.

b 90.00 Providing and laying broken chine mosaic flooring for

terrace using 12 mm to 20 mm broken pieces of glazed

tiles to be laid over cement mortar 1:3 to plain or slope

and to be tempered to bring mortar creme out upto

surface using white cement including rounding off

junctions and extending them upto 15 cm along the

wall,clearing with water and oxalic acid etc. as directed.

c 24.00 Providing and applying fibre reinforced elastomeric

liquid water proofing membrane with resilient acrylic

polymers having Sun Reflectivity Index (SRI) of 105 on

top of concrete roof in three coats @10.76 litre/

sqm. One coat of self-priming of elastomeric

waterproofing liquid (dilution with water in the ratio of

3:1) and two coats of undiluted elastomeric

waterproofing liquid (dry film thickness of complete

application/system not less than 500 microns). The

operation shall be carried out after scrapping and

properly cleaning the surface to remove loose particles

with wire brushes, complete in all respect as per the

direction of Engineer-in-Charge. 562.4 Sq. M.

d 2.00 Filling in Sunken Portion with good Quality Aerated

light weight concrete block having crushing strength

not less than 35 kg/sqcm and where directed by the

Architect / Engineer-in-charge, in sunk in layer.

including watering, ramming where it is required etc.

complete, as directed by the Architect / Engineer-in-

charge . 4559.61 Cmt

45 10.00 Providing and laying Cement concrete flooring for

I.P.S. 1:2:4 (for Indian Patent Stones) (1 cement:

coarse sand: 4 graded stone aggregate 20 mm.

nominal size) lain in layer finished with a floating coat

of net cement- 50 mm th etc. complete. 348.08 Sq.M.

46a 1000.00 Providing & Fixing M.S.grill, gate,stair / balcony railing

elevation element of Decorative pattern with M.S.

Channel ,flat ,medium grade m.s. pipe, square or

round bars with round heanded bolts, nuts, or by

screw. etc. comp. 100.17 Kg.

b 75.00 Applying priming coat over new steel and other metel

surface after and including preparing the surface by

throughly cleaning, oil, grease, dirt and other foreign

matter and scoured with brushes fine steel wood,

scrapers and sand paper with ready mixed priming

paint brushing red lead. 34.34 Sqmt

c 75.00 Painting two coats (excluding priming coat) on new

steel and other metal surface with enamel paint,

brushing, interior to give an even shade including

cleaning the surface an even shade including cleaning

the surface of all dirt, dust and other foreign matter.

d 10.00 Providing & Fixing 1 mm Thick S.S.-304 Grade 90 cm

High S.S. Railing having Hand Rail Member of 50 mm

Dia., 3 No. of Horizontal Pipe of 16 mm Dia. & Baluster

Suppprt of 40 mm Dia. At Every Third Step as per

Detail Given. Rate Includes All Work Complete as per

Description & as per Direction of Engg. in Charge. 2270.21 R.Mtr.

47a 6.0 Providing and fixing in position collapsible steel

shutters with vertical channels 20x10x2 mm braced

with flat iron diagonals 20x5 mm size with top & bottom

rails of T-iron 40x40x6 mm with 38 mm dia. Steel

pulleys complete with bolts , nuts , locking

arrangement , stoppers , handles including applying a

priming coat of red lead paint. 5391.23 Sq. M.

b 5.00 Providing corrugated 0.80 mm (22 gauge) thick G.I.

sheets roofing fixed with galvanized iron ‘J’ or ‘L’ hook

bolts, and nuts 8 mm. dia with bitumen and G.I. limpet

washers filled with white lead complete excluding the

cost of purlines, rafters and trusses. 719.93 Sq.M.

c 2.00 Providing valleys 900 mm. overall in plain 1.6 mm.

thick G.I. sheet Class – 3 fixed with ‘J’ or ‘L’ hook bolts

and nuts galvanized from ‘J’ or ‘L’ hook bolts and

bitumen washers complete. 1042.78 Sq.mt.

48 4.0 Providing and fixing rolling shutters of approved make made

of 80 mm wide M.S. laths inter-locked together through their

entire length and jointed together at the ends by end locks

mounted on specially designed pipe shaft with bracket

plates, guide channels and arragements for inside and

outside locking with push-pull operation including the cost of

hood cover and spring etc. complete.(A) Shutters having

width below 3.5 M. 3468.72 Sq.M.

49a 4.00 Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size 63.50x

38.10x 1.95mm ( Section no:4605, @ Wt

Kg/Rmt), horizontal two track member size 61.85 mmx

31.75 mmx 1.20mm ( Section no:8687 @ wt.of

Kg/mt), vertical member of size 61.85 mmx 31.75mm x

1.30mm ( Section no: 8758 @ wt. of 0.659 Kg/mt) with

sliding shutters of horizontal member size 40mmx

18mmx 1.29mm ( Section no:8949 @ wt. of

Kg/mt), vertical member of size 40mmx 18mmx

1.29mm ( Section no:8947 @ wt.of 0.456Kg/mt /

Section 8948,@ Wt.0.457Kg/mt) with 5 mm thick

transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc

complete for window.

49b 16.00 Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size 95mm x

24mm x 1.17 mm ( Section no:2459 @ wt. of

Kg/mt), horizontal Three track member size 92mm x

31.75mm x 1.30mm ( Section no:8688, @ Wt.1.07

Kg/mt), vertical member of size 92mm x 31.75mm x

1.50mm ( Section no:8933, @ Wt.1.06 Kg/mt) with

sliding shutters of horizontal member size 40mm x

18mm x 1.29mm ( Section no:8947 @ wt. of

Kg/mt), vertical member of size 40mm x 18mm x

1.29mm ( Section no:8949 @ wt. of 0.456 Kg/mt / with

5 mm thick transparent bronze colour tinted float glass

with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

50 10.00 ALUMINIUM DOOR WORK

Providing and fixing Aluminium Door work (Single

Shutter OR Double Shutter with or without fix glass)

made from Jindal or equivalent make Powder Coated

(50 micron pure polyester coating ) ,aluminium section

frame built up standard tubular and other section of

approved make confirming to IS 733 and IS 1285

member size with shutters of horizontal member

vertical member Confirming to IS733 and IS 1285 fixed

with rawl plug abd screws or fixing clips or with

expansion hold fasteners including necessary filling up

of gaps at junctions at top bottom and sides with

required PVC/ Neoprene felt, 8/12 mm toughened

glass of approved make etc. Aluminum sections shall

be smooth, rust free, straight.mitred and jointed

mechanically wherever required including Door

Hardware such as cleat angles aluminum snap

beading for glazing /paneling, CP Brass/ Stainless

steel screws, Stoppers, heavy duty floor hing, S.S.

Hinges, aldrop , Locking system, heavy duty Floor

Springs, Pivot and fixtures and transparent silicon

sealant glass fixing to frame as per details all complete

as per architectural drawings and the direction of

Engineer in Charge. rate incl. all type of alumnium

sections for doors as per the detail Architectural dwg.

51a 2.00 Providing and fixing standared extruded of alluminium

section of size 63 mm x 38.10 mm x 1.2mm

(Section:2434, @ Wt.0.643Kg/mt ) with colour

anodized alluminium frame for ventilation with 5 mm

thick frosted glass as details etc complete for

Ventilation 1163.92 Sq. M.

51b 2.00 Providing and fixing standared extruded of alluminium

section of size 63.50 x 38.10 x 1.95 mm ( Section no:

4605, @Wt 1.094 Kg / Rmt with colour anodized

alluminium frame with 5 mm thick transparent bronze

colour tinted float glass as details etc complete for Fix

window. 1509.9 Sq. M.

51c 17.00 Providing Fixing 1.2 mm thick Alluminium Section

Partition -Fully Glazed / Partly Panelled Partly Glazed /

Fully Panelled , Having Size of Section of 2.1/2 x 1.1/2

with 4 mm Compact Sheet / 5 mm thick Glass Fixing

with 4 mm thick EPDM Rubber etc. Complete as per

Direction of Consultant / Engg.incharge.

3124.44 Sq.mtr.

51d 4.00 Providing Fixing 1.2 mm thick Alluminium Section

Partition Door -Fully Glazed / Partly Panelled Partly

Glazed / Fully Panelled , frame Having Size of Section

of 2 .1/2 x 1 .1/2 and Door Section Having Size of

Tips Vertical 1 .3/4 x 1 .3/4, Top Rail 4 x 1 .3/4,

Middle Rail 1 .3/4 x 1 .3/4, Bottom rail 4 x 1 .3/4 with

4 mm Compact Sheet / 5 mm thick Glass Fixing with

mm thick EPDM Rubber Including Lock, Handle, Door

Closer, Door Stoper, Stopper etc Complete as per

Direction of Consultant / Engg.incharge.

4061.77 Sq.mtr.

52 Providing and fixing ISI marked 32 mm thick flush door

shutters conforming to IS : 2202 (Part I) decorative

type, core of block board construction with frame of 1st

class hard wood and well matched teak 3 ply veneering

with vertical grains or cross bands and face veneers on

both faces of shutters with 1.00 mm thick Decorative

Laminated Sheet on both faces of shutters including

ISI marked Stainless Steel butt hinges, bright /matt

finished 125 mm Stainless Steel handles of approved

quality & make, ISI marked oxidised M.S. door latches

of Size 300x20x6 mm conforming to IS:5930 with

necessary screws etc. complete as per direction of

Engg. incharge.

a 6.00 Flush shutter with both side laminate 4332.15 Sq.M.

Providing wood work in frames of Doors, windows

cleare story windows and othersimilar works wrought,

framede and fixed in position. (A) Indian Teak Wood

53 Providing and fixing 35 mm th. Shutters for doors

windows & clearstory windows incl. wood frames as

specified 12 cm. x 7cm. size incl. anodised alluminium

fixtures and fastenings including primer coat of

approved quality and two coats of oil paint etc.

a 2.00 Fully glazed 4788.50 Sq. M.

b 2.00 Fully panelled 5478.89 Sq. M.

c 3.00 Partly panelled and partly glazed 5133.69 Sq. M.

54 2.00 Providing and fixing FRP frame size 100x50 mm and

28mm thick FRP depress panel shutter having extra

reinforcement on sides & edges in Gel coat finish. The

core of the shutter & frame is to be filed up with

injected fire retardant grade polyurethene foam done in

situ alongwith embedded wooden pieces for stiffening

& also taking hinges & fintures. The whole FRP frame

& shutter is to be water proof weather proof, termite

proof & resistance to mild acid/alkali. Rates are to be

inclusive of S.S hinges with necessary screws &

alluminium fixtures & fastenings & fastener sleeve.

55 Making connection to the ex.M.H.in running sewer incl.

Dewatering and other required machinery etc. of

following dia pipes at any convenient time. All

damaged work shall be well repaired as per

instructions. etc..complete.

a 1.00 For Pipe 150 mm to 300 mm diameter 1339.29 No.

b 1.00 For Pipe 400 mm to 600 mm diameter 2232.14 No.

56 1.00 Making connection of galvanised Mild steel distribution

branch with galvanised mild steel main pipe upto

80mm nominal bore by providing and fixing tee

including cutting and threading the pipes complete

57a 100.00 Providing throating or plaster drip, grooves and

moulding to Wall , R.C.C. chajja and slab.

57b 20.00 Providing & Laying cement vatta 10 cm x 10 cm in size

quarter round in c.m. 1:1 ( 1 cement, 1 coarse sand)

laid in one layers finishing with a floating of neat

cement watering etc complete as dire.

58 80.00 Carring out plinth treat ment to post construction/

existing structure by spraying chemical solution for

termite control treatment including labour and material

consist ment withI.S.I specification. Using Chlordene

and Chiorpur files 20EC. As Per 6131_ paret- II

Consentration Weight one percent is recommended i.e

one litre 20EC chemical emulsion with19 liter give1%

concrentration inclusive of one litre chemical emulsion

appication at the rate of 5 Litre chemical/ Sqm of

surface is recommended as per I.S

59 5.00 Carring out timber treatment to all wood work including

drilling holes and spraying oil based chemical solution

on surface of timber work for termite control including

labour and material etc. complete. Using Chlordene

20EC. As Per 6113_part III Consentration Weight

percent is recommended one litre chemical emulsion

dillute with 9 liter of kerosene precent concentration.

Total dillute concrentration will be10litre inclusive of the

litre chemical emulsion application 0.75/Litre chemical

per one Sqmt printed two coat wood surface.

60 30.00 Paver Block Providing and laying shot blasted Non -

interlocking, Paver blocks of specified thickness, size,

grade of concrete and colour machine made and

blasting by automatic shot blasting machine and high

density of as per approved sample of approved make

for footpath, parking areas, service lanes,cross over

and other areas as mentioned in the drawing. Including

providing and laying 50 mm thick averave bedding

layer of coarse sand below paver block as per required

grading and specification. Laid paver block shall be

mechanically compacted. The work of the paving

blocks shall be executed in line and level by skilled

mason of flooring work only. Small size of paver block

with same specification shall be used at residue or at

end. It should be laid in such a way that the no cutting

of the paver block to be necessary. If cutting of paver

block shall be required , than cut by machine only and

laying to be done by skilled flooring mason. The

finished surface of the paver block shall have coarse

sand Texture Finish. Pave blocks shall be compacted

and shall be re-laid if necessary. Actual laid area shall

be measured and paid without any wastage. (A) 80 mm

thick M-35 grade Grey Paver block of size 200mm x

200mm. As per approved rate

61 40.00 SProviding and fixing pre-cast concrete kerb stone of

gray cement based concrete block 30cm length,30cm

height and 15cm thick of M250 grade concret as per

approved design and including excavation for fixing in

proper line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

62a 4.00 Providing and fixing double action hydraulic floor spring

of approved brand and manufacture conforming to IS :

6315, having brand logo embossed on the body / plate

with double spring mechanism and door weight upto

125 kg, for doors, including cost of cutting floors,

embedding in floors as required and making good the

same matching to the existing floor finishing and cover

plates with brass pivot and single piece M.S. sheet

outer box with slide plate etc. complete as per the

direction of Engineer-in-charge. With stainless steel

cover plate minimum 1.25 mm thickness 4558.89 No.

b 3.00 Providing and fixing aluminium extruded section body

tubular type universal hydraulic door closer (having

brand logo with ISi, IS : 3564, embossed on the body,

door weight upto 36 kg to 80 kg and door width from

701 mm to 1200 mm), with double speed adjustment

with necessary accessories and screws etc. complete. 1626.10 No.

63a 6.00 Designing, fabricating, testing, installing and fixing in

position Curtain Wall with Aluminium Composite Panel

Cladding, with open grooves for linear as well as

curvilinear portions of the building , for all heights and

all levels etc. including: 3061.95 Sq.mt.

(a) Structural analysis & design and preparation of

shop drawings for pressure equalisation or rain screen

principle as required, proper drainage of water to make

it watertight including checking of all the structural and

functional design.

(b) Providing, fabricating and supplying and fixing

panels of aluminium composite panel cladding in pan

shape in metalic colour of approved shades made out

of 4mm thick aluminium composite panel material

consisting of 3mm thick FR grade mineral core

sandwiched between two Aluminium sheets (each

0.5mm thick). The aluminium composite panel cladding

sheet shall be coil coated, with Kynar 500 based PVDF

/ Lumiflon based fluoropolymer resin coating of

approved colour andshade on face # 1 and polymer

(Service) coating on face # 2 as specified using

stainless steel screws, nuts, bolts, washers, cleats,

weather silicone sealant, backer rods etc.

(c) The fastening brackets of Aluminium alloy 6005 T5 /

MS with Hot Dip Galvanised with serrations and

serrated washers to arrest the wind load movement,

fasteners, SS 316 Pins and anchor bolts of approved

make in SS 316, Nylon separators to prevent bi-

metallic contacts all complete required to perform as

per specification and drawing The item includes cost of

all material & labour component, the cost of all mock

ups at site, cost of all samples of the individual

components for testing in an approved laboratory, field

tests on the assembled working curtain wall with

aluminium composite panel cladding, cleaning and

protection of the curtain wall with aluminium composite

panel cladding till the handing over of the building for

occupation. Base frame work cost for ACP cladding is

included in this item rate. The Contractor shall provide

curtain wall with aluminium composite panel cladding,

having all the performance characteristics all complete

, as per the Architectural drawings, as per item

description, as specified, as per the approved shop

drawings and as directed by the Engineer-in-Charge.

However, for the purpose of payment, only the actual

area on the external face of the curtain wall with

Aluminum Composite Panel Cladding (including width

of groove) shall be measured in sqm. up to two

decimal places.

b 4.00 Providing and fixing Structural Glazing with using the

17 Micron anodised of approved colour alluminium

section as transium, mullium of size 63mm x 38mm x

mm with using 6 mm thick reflective structural glass of

approved make, colour / Tinted, toughned and shade

and fixed with silicone sealant and spacer tap and at

corner sealed neoprene foam dust and Air sealed

gasket mirred including scaffolding, cleaning of glass

etc.complete at all heights anf lifts with all necessary

fitting and fixtures, anchore fasteners, necessary M.S.

or Aluminium brackets, suitable design for openable or

sliding window as per Architectural drawing and as

directed by Engineer-in-charge. Grooves between the

glasses to be filled with sealant of Dow corning -

structural sealant 995, weather sealant 789. The entire

facade should be water proof. The mullions are to be

connected to bracket by SS-304 nut bolts.

Measurement shall be given as per actual execution of

the work. (Rate are included providing & fixing of MS

structure steel work wherever Required)

64 Providing and Fixing Box type metal letters forming

composite box made from 1mm thick stainless steel

plate of grade 304 having brush finish of following font

size to be fixed at Main Gate in english and or Gujrati

and including fixing charges. etc. complete as per

direction of Engg. incharge. for Payment Purpose

Height of Letter will be measured.

a 660.00 Upto 300 mm Height 93.85 R. Inch

65a 3.00 Providing and Fixing MURAL made out of 2mm thick

s.s. plate grade 304, including making necessary

design as per Architect dwg. Through laser cutting

including connection to the R.C.C./Masonary with

necessary frame,anchor fastnuts,M.S.Plate etc.

complete as per direction of Engg. incharge. 6804.07 Sq.mt.

65b 900.00 Providing and Fixing Sinage - internal and external

signage boards with Vinyle Text on ACP sheet / 2 mm

th. S.S. Plate etc. complete as per direction of Engg.

incharge. 9.38 Sq.Inch

65c 3.00 Providing and fixing retro Reflective Hi Intensity Micro

Prismatic Grade Board using 2mm Aluminum / 4mm

ACP, angle iron 75 x 75 x 6mm. Descaling and

degreasing the board as per requirement using epoxy

reflactive process by screen painting as directed etc.

complete including transporting and fixing in C.C. 1:2:4

with necessary excavation curing etc. complete as per

I.R.C. 67-2012 design. A warranty for 7 years for the

Retro reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report

from third party test lab for the product offered shall be

submitted by contractor. (B)Class B Type-

4(MDR/ODR) retro reflective sheeting

7535.31 Sq.mtr.

65d 15.00 Road marking with hot applied thermoplastic paints

with reflectorising glass beads on bitumin surface

providing and laying a hot applied thermoplastic

compound 2.5 mm thick including reflectorising glass

beads @ 250gms per sqm area, thickness of 2.5mm is

excluding of surface applied glass beds as per IRC:35-

2015. The finished surface to be level, uniform and free

from streaks and holes. zebra patta /bump patta

lane/center line/ edge line/cut patta. The white color

marking should provide liminance coefficinet on

cemend road shalll be min 130 mcd/m2/lux and

Asphalt road shall be min 100 mcd/m2/lux during the

service life during the day time. The marking should

meet the performance criteria for night time reflectivity,

wet reflectivity and skid resistance as mentioned in the

section-15 of IRC 352015. Warranty for the Retro

reflectivity should be two years.

65e 2.00 CAT EYE/Pavement Marker(MNC two nail) made out

of acrylic StreneAcrylonitrile or hi-impact poly Steren

fitted with moulded of metheacrylate(MNC)reflector

cube corner reflector design,filled with tightly adhering

pooting compound as per ASTMD-788 size

11.5x7x1.60 cms or 10x10x1.75 cms provided with

bituminous adhesive in sufficient quantity with each

unit fixing with two shrank .Reflector on both side.Co

efficient of lumination as per specification and

compressive strenth 13 tones at 23 degree centigrade

etc.B) Double side lenses.

66a 40.00 Providing and fixing eco-friendly light weight calcium

silicate false ceiling tiles having T egular edge & 15mm

Thick Densified edges on the Tile Periphery for Extra

Strength The Light weight calcium silicate ceiling tiles

shall have, light reflection 85% non-combustible as per

B.S.476 part IV, 100% humidity resistance and also

having thermal conductivity 0.043° w/m KC. for the

best thermal Insulation.

The Light weight calcium Silicate tile shall be of

approved texture Fine fissured/ Spintone/ Cosmos

having NRC value of 0.5 & Globe having NRC value of

0.75 NRC or equivalent of size 595X595 mm to be laid

on true horizontal level suspended inter locking metal

grid of hot dipped galvanized steel sections

(galvanizing @ 120 grams per sqm including bothside)

consisting of main ‘T’ runner suitably spaced at joints

to get required length and size of 24X38 mm made

from 0.30 mm thick (minimum) sheet, 1200 mm centre

to centre, and cross ‘T’ of size 24X28 mm made out of

0.33 mm (Minimum) sheet spaced 1200 mm along

spaced between main ‘T’ at 600 mm centre to centre

to form a grid of 1200X600mm and secondary cross ’T’

of length 600mm and size 24x28mm made of 0.30 mm

thick (Minimum) sheet to be interlocked at middle of

the 1200X600mm panel to form grid of size

600X600mm resting on periphery walls / partitions on a

perimeter wall angle pre-coated steel of size

(24X24X3000mm made of 0.40mm thick (minimum)

sheet with the help of rawl plugs at 450mm centre to

centre with 25mm long dry wall screws @ 230mm

interval and laying 15mm thick Densified edges light

weight calcium silicate ceiling tiles of approved texture

(Fine Fissured/ Cosmos/Spintone) in the grid including,

cutting /making opening for services like diffusers,

grills, light fittings, fixtures, smoke detectors etc.,

wherever required, Main ‘T’ runners to be suspended

from ceiling using G.I. slotted cleats of size

25X35X1.6mm fixed to ceiling with 12.5mm dia and

50mm long dash fasteners, 4mm G.I. adjustable rods

with galvanized steel level clips of size 85X30X0.8mm,

spaced at 1200mm centre to centre long main ‘T’

bottom exposed with 24mm of all T-sections shall be

pre-painted with polyester baked paint, for all heights,

, as per specifications, drawings and as directed by

engineer-incharge.Note:- Only calcium silicate false

ceiling area will be measured from wall to wall. No

deduction shall be made for exposed frames/ opening

(cut outs) having area less than 0.30 sqm. The

calcium silicate ceiling tiles shall have NRC. Value of

0.50 (Minimum) for Fine fissured/ Spintone/ Cosmos

and 0.75 NRC for Globe, light reflection 85%

noncombustible as per B.S. 476 part IV, 100%

humidity resistance and also having thermal

conductivity. 0.043° w/m KC.for the best thermal

66b 35.00 Providing and fixing single layer water proof gypusm

board 12.5 mm thick of the make New good Group

Co.Ltd. or equivalent & New good Group Co.Ltd.

company sections using water proof board of size

mm x 1830 mm x 8.0 mm suspended by G.I suspender

of size 25 mm x 3 mm with intermediate channel of

size 18mm x40mm x0.80mm at 1220 mm center to

center ceiling section of size 40mmx 35mmx 0.55mm

at 457 mm center to center and perimetre chanel A of

size 20mm x 27mm x 30mm x 0.50mm at edges &

drops including paper taps and sofit cleat, anchor

fastener, scoch bolt connecting cleat joining compound

top coat on ceiling including making necessary opening

for light fitting, diffuser etc. complete as per detail

drawing as directed.

67a Providing and Fixing 6 mm thick Lexan Polycarbonate

multi wall roofing sheet fixed with hilti screw and rubber

silicon sealer and alluminium strip of size 50 x 3 mm

etc complete as directed by Engineer in charge

b Providing & Fixing 12 mm Thick Clear Toughen Galss

Partition With or Without Glass Door with All

Necessary Accessories etc. Complete as per Direction

20.25 of Engg. In Charge 4207.00 sqmt

c Providing Making & Fixing Glow sign Board of suitable

size as per approved color-Designed Back Light

Material fixed on G.I. sheet Box of suitable size with

concealed Light Fittings, Necessary Scaffolding etc.

complete as per direction of Officer in charge.

68 Manufacturing,testing ,supplying loading,,transporting

to work site,loading unloading lowering in

trenches,laying and jointing RCC NP3 class pipes in

C:M 1:1 including all jointing materials such as

cement,sand,hemp bitumen as directed testing the

pipe line to a head of 1.5 mt and hydraulic test as

directed etc comp.

a 30.00 300 mm Diameter 616.07 Rmt

b 5.00 450 mm Diameter 806.25 Rmt

Constructing Bombay Pattern Type Catch Pit of size

0.60 x 0.60 depth up to 1 mt including excavation,

B.B.C.C. (1:5:10), 23 cms thick brick maso. wall in the

prop. of CM (1:6) with 40 mm thick IPS flooring in the

prop M15 at bottom and 15 mm thick cement plaster

inside the catch pit in the proportion of CM (1:3) with

out jali etc. comp. as directed.

CatchPit Jali Fixing P/F FRC catch pit jali with frame

600mm x 600mm clear opening etc. comp.. As

directed by engineer in charge.

PERCOLATION WELL

Drilling of pilot bore hole in Alluvial Strata by direct

90 Rotary Rig of 250 mm. 694.64 Rmt

72 Reaming 400 mm

73 Electro Logging charges with carting

Providing and Installing 200 mm dia IS:12818 upvc

50 Casing Pipe "CM" class plain Pipe 1,193.75 Rmt

Providing and Installing 200 mm dia IS:12818 upvc

1 End Cap, with Air Vent cowl 669.64 Set

200 mm dia Regular with 1.5 mm sloted size cage type

76 trapezoidal shape wire wound little carbon galvanized

50 screen confirming to IS:8110 1,146.43 Rmt

77 Supply of Pea sized Gravel

78 Air Vent of 50 mm Bend

Lowering and Removing of Dropline up to Depth

90 mtr. 147.32 Rmt

80 Air Compressor 60 CFM/150 PSI

FIRE EXTINGUISHER

81 1 FIRE EXTINGUISHER Supplying, Installation, Testing and 2631.36 No

commissioning of Dry Chemical Powder (DCP) 6 Kg Fire

Extinguisher Mono Ammonium Phosphate Powder 40, Stored

Pressure Type, Pressure Gauge, Controllable discharge

mechanism Class A, Rating 3A & Class B rating 21B as per IS

15683 ISI MARK (ABC Dry Chemical Powder - MAP 40%)fitted with

required accessories including wall suspension brackets.

82 1 Supplying, fixing, testing and commissioning of CO2 type Fire 6525.42 No

Extinguisher of capacity 4.5 kg filled with Co2 Gas as per IS

with controll discharge mechanismfitted with Hose & Horn

applicable on Class B fire rating 21B confirms to IS 15683, bearing

ISI mark. Co2 Cylinder as per IS

83 4 Supplying & erecting ABC powder type 'Ceasefire' type Fire 838.98 No

extinguisher as per IS 13849 or 1 Kg capacity with necessary

clamp for erection on wall

Unit Rate Amount

I. No. Qty Items Per

Electrical Work Estimate

1.0 INTERNAL WIRING

1.1 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade ZHFR/HRFR

PVC insulated multi strand copper wires up to 10 mtr length , in

below type of pipe erected with 6A Modular type switch / bell push

& accessories and earth continuity of following type, erected on

PVC / Metallic/Wooden box, single mounting base frame covered

with textured/metallic/white front plate modules erected on / in wall

/ ceiling as per pipe erected, with necessary Lamp holder/ceiling

rose / H.D.Connector as directed.

25 (f) with medium class Rigid PVC pipe and accessories erected 505.05 Pt

concealed in wall/ceiling complete

1.2 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade ZHFR/HRFR PVC

insulated multi strand copper wires up to 10 mtr length, in below

type of pipe erected with 6A Modular type switch and hum free

EME four or more step type electronic fan regulator with separately

mounted and accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed.

12 (f) with medium class Rigid PVC pipe and accessories erected 701.40 Pt

concealed in wall/ceiling complete

1.3 Point wiring for secondary light point with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade

ZHFR/HRFR PVC insulated multi strand copper wires, in below

type of pipe to be erected complete with earth continuity and

necessary connection with primary light with accessories erected

on Metal / PVC / wooden box covered covered with appropriate

front plate modules erected on / in wall / ceiling for open /

concealed wiring. with necessary Lamp holder / ceiling rose /

H.D.Connector as directed.as per pipe erected with following type

of accessories.

Note:- Maximum up to 6 mtrs length, excess will be considered

as Mains for Secondary Point.

12 (f) with medium class Rigid PVC pipe and accessories erected 174.30 Pt

concealed in wall/ceiling complete

1.4 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade ZHFR/HRFR PVC

insulated multi strand copper wires up to 10 mtr length, in below

type of pipe erected complete with Modular type switch & 5 pin

Plug erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall / ceiling as per

pipe erected with following type of accessories.

1.4.1 10 [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from 530.25 Pt

nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

1.4.2 5 [II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire 774.90 Pt

from mcb db board.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

1.4.3 3 [III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire 906.15 Pt

with 2.5 sq.mm ( green) earthing wire from mcb d b board.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

1.5 15 Point wiring for on board Looped Plug with 6A Modular type 255 Pt

switch & 5 pin socket erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured / metallic/white

front plate modules erected on / in wall / ceiling with following type

1.6 Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm

& earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV

grade ZHFR/HRFR PVC insulated multi strand copper wires

erected in below type of pipe with 6A Modular type switches and

following type of accessories erected on PVC / Metallic/Wooden

box, single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall / ceiling as

per pipe erected. with necessary batten/angle holder or ceiling rose

or H.D.Connector as directed.

1 (f) with medium class Rigid PVC pipe and accessories erected 627.90 Pt

concealed in wall/ceiling complete

1.7 Providing following type of Modular Type Accessories mounted with

PVC / metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate , modules erected with

necessary connections as per site situation directed by Engineer In

1.7.1 2 (1)One No. SP 6 Amp. 150 E.a.

1.7.2 2 (2) One No 5 pin plug 150 E.a.

1.7.3 8 (7) Blank Plate Single 25 E.a.

1.7.4 5 (8) Computer RJ-45 socket 159 E.a.

1.7.5 6 (9) 16 Amp. SP one way switch 179 E.a.

1.7.6 6 (10) 6/16Amp. Universal socket 198 E.a.

1.7.7 1 (13) 6A/10A/16A/20A/25A/32A Single pole Modular MCB Switch 307 E.a.

1.7.8 1 (14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular MCB 406 E.a.

1.8 Providing and erecting ISI mark Medium class RIGID PVC PIPES

of following size complete to be erected on/in wall or ceiling

erected with necessary PVC fittings & Junction boxes fixed with

adhesive solution & Clamps with following dia of pipes, in approved

manner as directed

1.9 Providing & erecting PVC Corrugated Flexible Conduit with

required nos. of coupling, PVC bushes, Check-nuts etc. complete

of following sizes.

1.10 providing and erecting Mains with ISI marked electrolyte stranded

copper conductor, Non PVC Zero Halogen free fire retardant

insulated copper conductor, insulated wire (HRFR) conforms to IS-

694, erected in existing pipe with 1.5sq. mm copper conductor of

same specifications for earth continuity of following size.

In Existing medium class Rigid PVC pipe and accessories

1.10.1 90 (a) 2 wire 1.5 sq. mm 51 Mtr

1.10.2 120 (b) 2 wire 2.5 sq. mm 71 Mtr

1.10.3 25 (a) 2 wire 4 sq. mm 101 Mtr

1.10.4 10 (b) 2 wire 6 sq. mm 139 Mtr

1.11 providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories

1.11.1 25 (h) 4 wire 6 sq. mm 258 Mtr

1.12 providing and erecting Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control panel,

relays, power switchgears, motor starters & control wiring)

with required size of copper lugs, nuts and bolts if required.

1.12.1 60 (e) One wire 6.00 sq. mm 56 Mtr

1.13 Supplying and erecting Flexible PVC insulated multi strand multi

core 1.1 kv grade ISI marked copper wires of following size to be

erected as directed.

1.13.1 40 e) 1.50 Sq.mm 3 core round PVC sheathed 46 Mtr

1.13.2 15 h) 2.50 Sq.mm 3 core round PVC sheathed 77 Mtr

1.13.3 10 k) 4.00Sq.mm 4 core round PVC sheathed 175 Mtr

1.14 Supplying & erecting M.S. Box having 16 Gauge painted with red

oxide or Heavy duty PVC box erected flushed on wall or concealed

in wall with necessary plastering & finishing as directed of following

SUB - TOTAL OF INTERNAL WIRING

2.0 MCBDBs & MCBs

2.1 25 providing and erecting Miniature circuit breaker single pole 6A 111 E.a.

to 25A suitable to operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in existing box. confirming

to IS 8828/1996 with ISI Mark

2.2 Providing & erecting 240 V MCB double pole switch for motor

& inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity

2.3 Providing & erecting 415 V MCB Four Pole for Motor & Inductive

Load (C Curve) having 10KA breaking capacity & confirms to IS

:8828 in existing box having following capacity

2.4 2 Sheets steel powder coated enclosure suitable for incorporating 175 E.a.

One/Two nos. MCB.

2.5 Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The

DBs should be used of same company of MCB to be used) suitable

(A) single phase incoming and horizontal single phase

(b) sheet steel double door (IP-43)

2.5.1 1 (i)4 way ( FOR CONCEAL MANNER) 747.60 E.a.

2.5.3 4 (iii)8 way ( FOR CONCEAL MANNER) 1369.20 E.a.

2.5.4 R.O. (iii)8 way 1141 E.a.

2.6 providing and erecting Approved make ELCBs / RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for operation on

single phase 240 V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not incorporate any electronic

component. for following Max. rating erected as directed

2.6.2 3 (ii) 40Amps. DP 2213 E.a.

2.8 4 Providing and erecting metallic vitrified danger notice board as 69 E.a.

per language suggested by engineer incharge for MEDIUM

VOLTAGE installation to be erected as per IS-2551.

2.9 2 Providing & erecting Medium Voltage Danger Notice Board 26 E.a.

sticker as per language suggested by engineer incharge of

standard size as per IS-2551

SUB - TOTAL OF Switchgears , Panel and MCBDBs.

Follow IS code :3043 is the guideline for the earthing

3.1 15 Providing and erecting required size HOT deep Galvanised iron 77 KG

strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board,

Motors etc. using proper clamp.

3.2 5 Providing and erecting required size Copper strip for earthing of 787 KG

H.T. OCB / ACB/ Transformer, LT panel board, Motors etc. using

3.3 2 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 787 KG

3.4 15 Providing and erecting HOT deep Galvanised iron strip wire 8 to 77 KG

3.5 Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber

and heavy duty cover.(approved make OEM has to submit test

certificate) & having back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 / meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing compound should

be capable to retain moisture for long time Necessary test report

must be submitted.

3.5.1 1 (a) For Electrical Installation up to 440V in normal soil 4546 E.a.

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

3.5.2 1 (c) For Electrical Installation covering Transformer Neutrals, 8551 E.a.

Lightning arrester Earthing, A.C.Plant & Sensitive Computer

System(like Automation, SCADA) i.e independent Earthing in

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

SUB - TOTAL OF Earthing

4.0 CABLES AND CABLE TERMINATIONS

4.1 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing trench / pipe of

following size of cables

4.1.1 40 (B) 3 core 4 Sq. mm 87 Mtr

4.1.2 50 (C) 3 core 6 Sq. mm 106 Mtr

4.2 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe at road

crossing or floor of following size of cables.

4.2.1 25 (A) 3 core 2.5Sq. mm 213 Mtr

4.2.2 45 (B) 3 core 4 Sq. mm 285 Mtr

4.2.3 10 (C) 3 core 6 Sq. mm 392 Mtr

4.3 Providing & laying approved make Double walled corrugated

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at required

depth in existing trench for laying of cable. below ground / road

surface for enclosing cable

4.3.1 20 (A)50 mm outer dia 62 Mtr

4.3.2 20 (B)63mm outer dia 73 Mtr

4.4 Providing & laying approved make ISI marked Rigid PVC pipe

having 6Kg / cm2 (Class-3) to be erected at road crossing on or

floor as directed for laying of cable. The pipes as following size of

dia & weight per 6 mtr.

5 (D) 75 mm inner Dia. (5.5 Kg/6RMT) 124 Mtr

4.5 Providing and, fixing heavy duty flange type brass cable gland

with rubber ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of cables.

4.5.2 4 (b) 2 to 4 core 6 Sq. mm 38 E.a.

SUB - TOTAL OF Cables,Cable Terminations

5.0 Light Fixtures & Fans

Supply , Installation, testing and commissioning of pre-wired, LED

fitting/post top luminaries etc of all types, complete with all

accessories and tube etc. directly on ceiling/ wall, including

connection with 1.5 sq. mm FRLS PVC insulated, flexible, copper

conductor, single core cable with flexible conduits and coupler and

earthing etc. as required. Note:- The LED Light fixtures should

comply all international standards third party ( LM 79 for

complete fixture, LM 80 for individual LED ). The

Manufacturer / Channel Partner of the Manufacturer has to

submit 4- Years unconditional free Replacement Guarantee

for complete fixture.

5.1 Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used

as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V

to 270V, Power Factor more than 0.95, THD < 15%,CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency >

85 %( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

5.1.1 ( A ) Tube Light with integral / non integral driver

5.1.1 a 2 (iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet 293 No

5.1.1 b 1 (v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet 530 No

5.1.2 (B) LED Panel Light with provision for Plane front frame with

translucent cover fixed to housing complete.IP20

5.1.2a 2 (i)up to 8 Watts,4" x 4", Surge-2 KV 271 No

5.1.2b 5 (iii) 12-15 watts, 6" x 6", Surge-2 KV 462 No

5.1.2c 20 (iv) 18 to 20 watts, 8" x 8", Surge- 2 KV 607 No

5.1.2d 2 (vi) 36 watts, 24" x 24", Surge- 2KV 1777 No

5.1.3 (F) Spot Light 425 Lumens, Surge-2KV

5.1.3a 2 (a) 3 to 7 Watts 805 No

5.1.3b 10 (b) 8 to 11 Watts 1354 No

5.1.4 3 (H) Mirror Light 9 Watts, wall mounted minimum 1 feet long 309 No

5.2 Supplying and erecting led lamps with following wattage capacity of

220 to 240 voltage, minimum 15000 burning hours life, 500 V in

built-surge protection,Polycarbonate diffuser, mounting suitable for

E14 / E27 / B22 lamp holders, pf >=

5.2.1 2 (ii) 5 to 8 watts 111 No

5.2.2 2 (iii) 10 to 15 watts 187 No

5.2.3 2 (iv) 16 to 20 watts 256 No

5.3 8 Providing & erecting Approved make Power Saving 50 Watt 1929 No

Ceiling Fan with double ball bearing ISI mark with Condenser

230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades

with aluminium blades with , canopy & 30 cm. down rod erected

with earthing.(Make shall be approved by Engineer in charge)

5.4 1 Providing & erecting Approved make Ceiling Fan with double ball 1721 No

bearing ISI mark with condenser A.C.230V 50c/s. 1400 mm. sweep

complete, canopy erected on existing hook or clamp with earthing

[ Make shall be approved by Engineer in Charge]

5.5 1 Providing & erecting Approved make Ceiling Fan with double ball 1963 No

bearing with Condenser 230 volt A.C.50 Hz. 900 mm sweep

complete having 3 Aluminium blades, canopy erected complete. [

Make shall be approved by Engineer in Charge]

5.6 1 Supplying and erecting approved make oscillating type medium 2329 No

duty bracket fan with Aluminium Blades A.C. 23OV. 50cy/s wall

mounted with height adjustment and rotary tilting device complete

with guard, mounting accessories kit, pull cord for speed and

oscillation flexible Core plug top complete erected with lead wires

as directed.400MM

5.7 3 Supplying & erecting approved make low noise decorative exhaust 1687 No

fan having size 200mm with 1350 RPM with square frame ABS

body with inbuilt lowers & square frame.

5.8 10 Supplying & erecting fan hook box of 10 mm M.S. round bar 107 No

bounded to the RCC bars up to 50mm length each side and

pierced through a 16 Gauge M.S. box / Heavy Duty PVC box

complete erected concealed in Ceiling with necessary finishing.

5.9 10 Providing 2.5mm.thick laminated acrylic sheet to cover the fan 18 No

hook or Fan box.

5.10 10 Supplying and erecting 19 / 20 mm. nominal bore Medium Class 107 Mtr

M.S. Pipe down rod erected duly painted for fan complete with

proper insulation without leakage and earthing.

5.11 4 Providing and erecting PVC body surface or pendent mounting 780 No

LED Bulk type 9 watt Lighting Fitting with electronic driver. And

lumen output from luminaire 720lm , input voltage range 90-

300VAC , 50Hz cool white(3000 to 6500k), inbuilt driver, -20degC

to +60degC working temperature, AL frame with Beam Angle

SUB - TOTAL OF Light Fixtures & Fans

6.0 External lighting

Supply , Installation, testing and commissioning of pre-wired, LED

fitting /post top luminaries etc of all typesof external lights, complete

with all accessories and tube etc. directly on pole / pole bracket

including connection with 1.5 / 2.5 sq. mm FRLS PVC insulated,3

core flexible, copper conductor, with flexible conduits and coupler

and earthing etc. as required.

6.1 Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 1Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion

free High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company mark/name engraved

or embossed 120 to 300 V,Power Factor more than 0.95, THD <

10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 120 lumens/watt . LED driver efficiency > 85 %.CREE /

OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.)

make LED used for luminaire. ( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV /5000K integral and

10 kv non integral ,Light must have 440VAC line supply protection.

It should withstand 48 hours for 440VAC line supply.

2 (f) Above 60 watts to 90 watts 5917 No

6.2 Supply of approved make frp/grp pole having followiing

specifications :

FRP/GRP pole made by centrifugal moulding process using

thermoset resin polyester/epoxy resin system having minimum

glass content 45.0%.The pole should be in one pieceand tapered

round in shape,having smooth outside surface finish and should be

totally fre from corrosion as well as non conductive and shock

proof. Pole should be provided

with FRP/GRP base bracket dully fabricated from metal(M.S) and

dully claded with FRP/GRP material to avoid any metal exposer

and painted with PU paint.

Pole should mechanical properties i.e 1. Specfic gravity (ASTM D

792) 1.3‐1.8 Kg/m3, 2. Glass Content % by weight (ASTM D 2584)

45.0 ‐55.0%, 3. Water absorption (ASTM D 570)

<0.5%, 4. Tensile Strength(ASTM D 638) 200+/‐50Mpa, 5. Flexural

strength (ASTM D 790) 250+/‐50Mpa, 6. Compressive Strength

(ASTM D 695) 200+/‐50MPa, 7. Yeild Strength(ASTM D638)

Pole should be flame retardant as per IS 6746.Resin used shall be

UV resistance and pigmented. Pole should be painted with first

coat of epoxy primer and then two coat of highly

weather resistance polyurethen paint to ensure proper addhesion

of the paint.Minimum thickness shall be 80 to

micron.Defelection of the pole shall not exceed more than

10.0 % of the length of the pole for the given load.Pole should be

generally made as per the dimensional data,performance criteria

and some interchagebility features of poles

as per the standard ANSI C123.20 latest version of ASTM D

923/01 including cable termination box with necessory

accessories.The size of pole and type of installation with

foundation , Anchor Base & Internal junction box as per the

manufacturer details and site requirement .

(3) 'B' class (Heavy Duty) frp/grp pole suitable for base plate

2 [D] Overall Length of 6.0 meter, Average thickness : 7mm, 16815 E.a.

Top/Bottom Outside Dia. 76/176mm +/‐2.Weight of Pole 25.0 Kg

approx. (Without base) Metal Anchor Base dully frp claded (Size :

340 Ø * 12mmthk , Mounting hole PCD 285mm * 6 nos. of 20 Ø

6.3 Providing FRP/GRP arm bracket of having 15˚ arm with 50 mm

OD pipe *5 mm thk,1000mm long from pole centre

2 (a) Single arm bracket 1882 No

6.4 1 Supplying & erecting sintex make SMC press moulded composite 472 No

FRP. loop-in, loop-out approx. 2mm thick box complete with

bakelite connector strip 4way & hinged doors having locking

arrangements with mounting clamp with nuts, bolts & washers

suitable for erection on wall ( c)150mm x 125mm x 100mm [deep].

6.5 2 Providing cement concrete.for foundation or for concrete filling 5077 CU Mtr

in 1:2:4 ratio with 20 to 25 mm stone metal duly plastered with

necessary curing for pole muffing or any other purpose.

6.6 2 B' class galvanised iron pipe 32 mm outside dia 45 cms long duly 340 No

welded on 20 cms x 20 cms x 3 mm thick M.S. base plate, erected

on wall or corner for mounting street light luminaire with necessary

hardware materials duly painted.

SUB - TOTAL OF External Lighting

7.1 1 Supplying & erecting approved make Automatic liquid level 2332 Job

controller 6A. with sensor testing as per instruction of Engineer

in charge on site complete with wiring connection with existing wires

, with copper conductor from pump to upper and lower tank.

7.2 Supplying and erecting Flexible PVC insulated multistrand

multicore 1.1 kv grade ISI marked copper wires of following size to

be erected as directed.

90 e) 1.50 Sq.mm 3 core round PVC sheathed 46 Mtr

7.3 Providing and erecting ISI mark Medium class RIGID PVC PIPES

of following size complete to be erected on/in wall or ceiling

erected with necessary PVC fittings & Junction boxes fixed with

adhesive solution & Clamps with following dia of pipes, in approved

manner as directed .

7.4 1 Providing & erecting water cooler having storage capacity 150 Ltr. 55340 No

& cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C.

The outlet temp. of the water should drop by 15˚C within a hour,

The water cooler should be comprising of hermetically sealed

compressor, fan motor, condensing unit, water tank surrounded by

evaporating, coil, thermostats, relay etc.complete with necessary

inlet & outlet connection. The body of water cooler will be made

from Stainless Steel.

7.5 1 Supplying and erecting water filter cum purifier with ultra violate 5371 No

technology. (Aquaguard / waterdoc model or equivalent symphony/

crystal/videocon model)

7.6 Providing & erecting open well type horizontal mono block pump

set with stainless steel body having following specification

2 (C) 1 H.P. single phase open well motor pump set suitable for 185 9518 No

LPM discharge @ 25 mtr. head, suitable for 32 mm dia. Delivery

pipe with control panel.

7.7 1 Charges for doing liasioning work for obtaining the necessary 6779.66 No

clearances from the Electrical inspector / competent Authorities for

the total Electrical installation,co-ordinating with various agencies.

All necessary drawings, calculations, test certificates, etc. as

required by these authorities shall be prepared and furnished by

the EPC Vendor. Any modification/rectification as required by these

authorities shall be carried out by theEPC Vendor at free of cost.

The fees required to be paid to these authorities for inspection shall

be borne by Owner on production of documentary evidences.

SUB - TOTAL OF MISC. Work

Furniture Work ( Curtains and Cupboard Shutter)

Proviging and Fixing Storage Shutter made out of

50mm X 25 mm Indian Teakwood Frame and 18 mm

Ply Board. With 1 mm thick laminate finish in the front

and 0.8 mm thick Laminate on Back Side with 12 mm

thick Indian teakwood beading. The scope also include

providing and fixing s.s. finish hardware as per the

Requirement. The rate include cost of all labour,

material and with all hardware like handle, magnate,

tackels, adhesive, screws, etc.for satisfactory

completion of this items.All Exposed Wood Work shall

have malamine polish etc. complete.

2 Providing & Fixing Sun Control Reflective Type Film /

Frosted Film as Selected by Architect/ Engg. In Charge

For Glass Doors / Windows etc. as Directed.

3 Providing & Fixing in Position Vertical Roller Blinds with

Minimum 3 % and Maximum 5 % Light Transperace

Screen Fabric Incuding Providing & Fixing of Powder

coated G- Channel at the Topof Window with

necessary Screw , Cleats etc. and PVC Roller ( Weight

Pipe) and PVC Chain For Up and Down Movement of

Blinds etc. of Approved Make and as per Drawings /

Instruction of Engg. in Charge For All Colors and

Shades. Rates Includes all Lead and Lift For All Floor

Level, All Height , All Material , Accessories, Fixing

Scaffolding , Labor etc. Complete in All Respects. All

Required Accessories & Material must be From Same

4 Cubical track for cubical curtain :- supply and

installation of heavy duty Aluminium cubical track size

20mm wide x 30 mm high, made of aluminium

Extruded with white powder coating complete with

continous PVC liner, nylon giders and hooks , plastic

end cap, connecting bridge, overlapping joint

connector, Wall bracket with matching screws to make

up cubicle approx. height to 2100 mm clearance from

floor level at approx. 1000 mm spacing with all

accessories of approved brand/make along with

alluminium Extruded hospital curtain's track system

with shite powder coating with all accessories as per

approved sample. All required accessories and

materials must be from same manufacturer. This Item

is Excluding Curtain.

5 Cubicle Curtain :- Supply & Installation of Water

Repellant, Antimicrobial Cubicle Curtain with High

Strength18" Oval net at Top as Approved by

Consultant / Engg. In Charge. Eyelets on Curtains &

Hooks and All other Required Accessories, Fixing

Scaffolding, Labor etc. Complete in All Respects. All

Required Accessories & Material must be From Same

14.00 Manufacturer. 400 Sq.mt.

Total of Furniture Work ( Curtains and Cupboard

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTMENT- WEST ZONE

Project Name:- CONSTRUCTION OF URBAN HEALTH AND WELLNESS CENTER AT

F.P.NO. 319 OF TPS NO. 29 (NARANPURA) IN NARANPURA WARD WEST ZONE,

FINANCIAL BID ( To Be Submitted Online Only )

Sr. No. Description Amount

1 Amount For Civil Work Rs.

2 Amount For Electrical Work Rs.

3 Amount For Furniture Work ( Cupboard Shutter and Curtains) Rs.

I/We am/are willing to carry out work at ______ % Above / Below (should be written in figures

and words) The Estimated Cost Mentioned Above.

Estimated cost put to tender: Rs.55,79,406.77 Estimated cost put to tender: Rs.

Add_____% above : Rs ___________ Deduct_____% below : Rs __________

In words : Rupees _______________________ In words : Rupees_____________________

Signature of contractor Additional City Engineer (WEST ZONE)

Seal Ahmedabad Municipal Corporation