SPECIAL REPAIR TO INTERNAL ROAD FOR FASF AT GANDHINAGAR MIL STN

Amount

Material and Labour for Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exceeding 400 Sqm and depth exceeding 50mm and not exceeding 100mm complete all as specified and as directed.

Material and Labour for preparing black top surfaces by bruishing with wire brush for removing caked mud, existing grass on road etc sweeping with brooms and finally fanning the cleaning surfaces with air compressor to remove all loose dust and applying a priming/tack coat with bituminous primer (VG-10) applied at the rate of 5 kg per 10 sqm heated on requisite temperature by using mechanical sprayer complete all as specified and as directed.

Material and Labour for laying premix bituminous macadam (consolidated thickness 75mm or less) using graded crushed stone aggregate, grading 2 with nominal aggregate size 19mm, mixed with paving bitumen of grade VG-30 mixed at the rate of 4% by weight of total mix,rolled and compacted with 8 to 12 tonne power roller to required gradient and camber complete all as specified and directed .( Note-Mix will be prepared in Mix Plant of suitable capacity)

Material and Labour for preparing black top surfaces by bruishing with wire brush for removing caked mud, sweeping with brooms and finally fanning the cleaning surface with gunny bags to removed loodr doirt etc complete all as specified and as directed.

Material and Labour for applying priming/tack coat with bituminous primer (VG-10) applied at the rate of 2.5 kg per 10 sqm heated on requisite temperature by using mechanical sprayer complete all as specified and as directed.

Material and Labour for laying of bituminous premixed Semi-dense asphaltic concrete 30mm consolidated thickness with coarse aggregate of grading 1 as per MORTH specification in single layer using paving bitumen of grade VG-30 mixed at the rate of 5.50% by weight of total mix as per design mix including supply and mixing of filler (OPC Cement) laid, rolled and compacted to required gradient and camber using full width mechanical sensor paver with string sensor and compacted with 8 to 12 tonne power vibratory road roller complete all as specified and as directed.

Material and Labour for hot applied thermoplasatic road marking paint inclusive type-I reflectorising glass beads as per table 800-3,800-4 of MORT&H applied in uniform thickness of at least 2.0mm and spread uniformly with reflectorising glass beads type-II @250gms per sqm with a road marking machine as per IRC-35, with traffic diversion arrangements if required complete as per MORT&H specification clause 803.4 complete all as specified and as directed

Dismentling of old unserviceable/damaged road furniture items loke cat eye , solar cat eye and delineatoree etc of any description complete all as specified and directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete

Supply and fixing solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

ALBA AC AND REF SERVICES (BID ID -3229423)

Shree Builders (BID ID -3228876)

Aggarwal Brothers and company (BID ID -3228616)

DMA PROJECTS (BID ID -3223587)