Constuction of Market Shed at Champaguri Hat within Champaguri GP under and Repairing of Existing old Market Shade at Champaguri Hat within Champaguri GP

Earhtwork in Filling in foundation or plinth with good earth in layers not exceeding 15 cm including watering and ramming etc layer by layercomplete . A) with earth obtained from excavation of foundation.

By carried earth ( lead 1 to 3 Km)

Single brick flat soling of picked jhama brick including ramming and dressing bed to proper level and filling joints with powdered earth or local sand .

Ordinary Cement concrete (mix 1:3:6) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. (b) River bazree

Ordinary cement concrete(mis 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any , in ground floor as per relevant IS codes (a) M20 Grade ii) River Bazree

Reinforcement for reinforced concrete work in all sorts of structure including dist. Bars,stirrups………drawing and direction of E.I.C.

a) 25mm to 30mm thick wooden shuttering as per decision and derection of E.I.C.

Brick work with 1st class bricks in cement mortar (6:1) a) In foundation and plinth .

125mm th brick work with 1st class bricks in cement mortar (1:4) in ground floor

Plaster (to wall , floor, celling ) with sand and cement Mortar including off or chamfering corner a) with 20 mm th Cement plaster(4:1)

M.S. works in framed gratings of window etc.made of round or square bars and frame work or M.S. flats (with the bars securely fixed to the flat bar frame) with or without intermediate flat bar stiffener and fixed with necessary screws etc. complete, as directed.

M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1957 & IS: 1161- 1958 cnnected to one another with bracket, gusset cleats as per design,direction of Engineer-in-charge complete including cutting to requisite size, fabrication with ecessary metal arc welding conforming to IS: 816- 1956 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 1957, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section,consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. including handling charges of materials for the work complete. Payment to be made on the basis of calculated weight of structural tubular memebrs as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are onsidered for a height of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m or part thereof.

Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor) (i) In Roof:- a) With 0.60 mm thick sheet(2.70m/2.10m long)

Galvanied iron shhet ridging

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification. (iii) Two coats.

Add cost of Electrical works

Sign Board

GST @ 18% of gross amount [SL NO 1 TO 18]

Labour Welfare Cess @ 1% of gross amount [ SL NO 1 TO 19]

Taking out carefully G.C.I. or C.I. or asbestos sheets (including ridges etc.) from roof or wall after unscrewing bolts, nuts, screws etc. and stacking the material at site as directed.

Single brick flat soling of picked jhama brick including ramming and dressing bed to proper level and filling joints with powdered earth or local sand .

Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75m in ground floor including roof. (a) upto 150 mm. thick

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. (b) River bazree

Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor) (i) In Roof:- a) With 0.60 mm thick sheet(2.70m/2.10m long)

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar (b) 20 mm thick plaster

(ii) With 1:4 cement mortar (b) 15 mm thick plaster

a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : (iv) Two coats (with any shade except white)

Colour washing with any shade with Stainers, as required including cleaning and smoothening surface thoroughly (iii) Two coats. (i) Internal surface (All floors)

GST @ 18% of gross amount [SL NO 21 TO 30]

Labour Welfare Cess @ 1% of gross amount [ SL NO 21 TO 31]