REPAIR/MAINTENANCE OF DG SETS,CLEANING OF RAW AND FRESH WATER UG SUMPS INCLUDING ALLIED E/M SERVICES AT AOB RAMBILLI,VISAKHAPATNAM.

Amount

Material and labour for earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised iron strip of size 32mm x 6mm earth lead by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I connected to earthing point and testing on completion with and including 40 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with precast RCC 1:1.5:3 type A-1 20 mm thick cover reinforced with 8 mm dia MS bars 3 nos both ways with lifting hook made out of 8 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore medium grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work complete all as specified and as directed.

Inspection, maintenance and servicing of 10 KVA DG set installed at MPC complex including Alternator, of connected DG sets for routine check up(once in a month/A check) of the engine for the smooth functioning as per the manufacturers instructions all as specified and directed by the Engr-in-Charge.

All as per Serial Item No.2.00 here-in-before but for 100 KVA DG set installed at RO plant.

All as per Serial Item No.2.00 here-in-before but for 160 KVA DG set installed at4 pole structure and NCN Building .

All as per Serial Item No.2.00 here-in-before but for 200 KVA DG set installed atwater treatment plant.

Inspection, maintenance and servicing including warnishing of winding to increase insulation values of windings of of the Alternator of the 100 to 160 KVA capacity connected DG sets of the engine for the smooth functioning as per the manufacturers instructions all as specified and directed by the Engr-in-Charge.

Inspection, maintenance and servicing including warnishing of winding to increase insulation values of windings of of the Alternator of the 200 KVA capacity connected DG sets of the engine for the smooth functioning as per the manufacturers instructions all as specified and directed by the Engr-in-Charge.

Repairs to the AMF panels of connected DG sets of 100 to 160 KVA capacity for the smooth functioning as per the manufacturers instructions all as specified and directed by the Engr-in-Charge.

Repairs to the AMF panels of connected DG sets of 200 KVA capacity for the smooth functioning as per the manufacturers instructions all as specified and directed by the Engr-in-Charge.

Servicing of DG set capacity 160 to 200kVA make cummins and taking out the defective/unserviceable parts and re-assembling the same after repair/replaced and testing complete all as specified and directed. (Note : U/S spare parts shall be measured and paid separately as supply only here- in- after).

Supply only Diesel filter

Supply only Oil filter

Supply only Oil pressure gauge

Supply only Hose pipe set with clamps & clips complete

Supply only Ampere meter

Supply only Volt meter

Supply only Air filter

Supply only Fan belt

Repairing of self starter of DG set by replacement & bearing, field coil, GM bushes varnishing & testing as directed.

Repair and over hauling of injector Nozzle including calibration 100 to 200 KVA DG set in authorised factory and testing by pressure machine on required pressure as specified and directed.

Repair and over hauling of 160KVA DG set FIP including replacement of defective parts as required including calibration in authorised factory/dealers and testing complete all as directed.

Repairing of dynamo including replacement of armature field coil, GM bushes, heating, varnishing, testing complete all as directed.

M & L for cleaning of Raw water UG sumps of Ten (10) Million Litres Capacity by scrapping with nylon brushes, sweeping for removing silt/sand/mud/moss and all deposits inside the sump and removing the rubbish to distance not exc. 01 KM and depositing where directed. with one coat of distemper on exterior surfaces & white wash an interior , writing of sump particulars along with date of cleaning & next due date complete all as specified and directed. Note: Applying the bleaching powder before scrapping and after cleaning of sump and rates are deemed into quoted rates of tenderer.

All as per Serial Item No.23.00 here-in-before but for Five (05) Million Litres Capacity

All as per Serial Item No.23.00 here-in-before but for 10000 Ltr Capacity.

M & L for cleaning of Fresh water tanks of capacity 10000 Ltrs by scrapping with nylon brushes, sweeping for removing silt/sand/mud/moss and all deposits inside the sump and removing the rubbish to distance not exc. 01 KM and depositing where directed.with writing of particulars along with date of cleaning & next due date complete all as specified and directed . Note: Applying the bleaching powder before scrapping and after cleaning of tank and rates are deemed into quoted rates of tenderer.

All as per Serial Item No.26.00 here-in-before but of capacity 1000/2000 Ltrs.

M & L for cleaning of Water treatment tanks with one coat of distemper on exterior surfaces as per exixting colour code, writing particulars along with date of cleaning & next due date complete all as specified and directed are as follows:- (a) Collection Tank/Chamber, (b) Sludge Tank/Chamber (c) Clarifier (d) MGF & ACF etc compete including replacement of necessary filter media(Ex. Sand, gravel etc) all as specified and directed by Engr-in Charge.

Taking out carefully unserviceable fuel injector pump assembly of 200kVA DG set of 1500 RPM Make:- CUMMINS/KIRLOSKAR/KEC/CROMTON, cleaning/ oiling/servicing fuel injector pump assembly , recalibration of Fuel Injector Pump after replacing unserviceable nozzles/Bearing bush with roller/ Delivery valve with washer and spring/Roller Bearing. /Bearing end plate etc.,re-assembling and fixing the same in position and testing the Fuel Injector Pump assembly all as specified and directed by Engineer-in-Charge.

Repair/replacement of maintenance free battery of capacity 12V 65 AH battery or suitable complete all as specified and directed by Engineer-in-Charge.

Supply and filling lubrication oil SAE-40 ( 20 W- 40 grade) of Make SERVO OF IOC/HINDUSTAN PETROLEUM/BPCL/ CASTROL) as approved by GE.

Supply, install, testing & commissioning in replacement of PCB control board for the DG Set of capacity 100 kVA to 200 kVA of existing make and model as site as per OEM recommendations complete all as specified and directed by Engineer-in-Charge. .

Dismantling of oil sump and decanning old engine oil from DG set upto 200 kVA capacity and cleaning the oil sump chamber by removing settled particals, sludge etc for pressure vaccume including rectify the leakage by welding including refixing the same by replacement new nuts, bolts clamps all as specified and directed.

Disconnecting, and taking out carefully old unserviceable rectifier of any make and capacity,suppling and fixing new rectifier of existing make suitable for 160 to 200 kVA DG set complete all as specified and directed.

Supply and Fix, in replacement of RO membranes of size 8" MEMBRANSE with Thin Film Composite or suitable for feed TDS 10000 ppm, 40" length and treated TDS less than 150 ppm complete all as specified and as direted

Supply and Fix, in replacement of Flow meter, WATER ROTAMETER - LZS -CONICAL - LZS 32 and RANGE: 0.2- 2.2 Cum/Hr, with metric union - measure range 0.2 – 2.2 cum/Hr, ABS FLOAT with working pressure 0.6MPA, with ELBOW complete all as specified and as direted

Supply and Fix, in replacement of Pressure gauges, 0-5 kg/cm2 & 0-21 kg/cm2,Stainless steel complete all as specified and as direted

Cleaning and Painting of DG set of capacity 100 to 200kVA with one coat of existing colour code including panel board complete all as specified and directed . Note:- 1. Painting shall be done with existing colour codes and painting shall apply with help of spray gun use of air compressor. 2. Quoted rate also included for after completion of painting and area should be clean well.

All as per Serial Item No.38.00 here-in-before but DG set Capacity 10KVA.

Labour only for attending break down of 600 mm bore DI/MS pipe line bursting / cracks and including cleaning / removal of broken pipe pieces of various lengths through gas cutting / manual cutting as per site requirement and including by using suffient dewatering pumps , and directed by the Engineer -in - Charge. Note 1 :- The quoted rate is deemed to be include the following:- (i) Arrangement of suitable Pump sets for dewatering at the time of attending break down (ii) Necessary labour / trade men for attending break down. (iii) does not include Labour element required for fixing CI/DI/MS pipes, specials, fittings etc. Note 2 :- M&L for Earth work, Lead joints, supply only CI / DI / MS pipes, specials, fittings will be measured and paid seperately under relevant items of BOQ.

All as per Serial Item No.40.00 here-in-before but 400 mm bore DI/MS pipe.

All as per Serial Item No.40.00 here-in-before but 150/200 mm bore DI/MS pipe. 400 mm bore DI/MS pipe.

All as per Serial Item No.40.00 here-in-before but 150/200 mm bore DI/MS pipe. 400 mm bore DI/MS pipe. 50 mm bore CPVC/uPVC/HDPE pipe.

Supply only DI K9 water supply pipe lines of size 600 mm bore and including taking down old DI water mains with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed by Engineer-in-Charge.

All as per Serial Item No.44.00 here-in-before but of DI K7 for 400 mm bore

Supply only MS ERW pipe of size 200 mm bore, 5.6 thick for inserting the pipe in position and including making leak proof joints and including taking down old pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fix MS flange 20 mm thick for 200 to 600 mm bore to be welded to MS pipe and including flange joint 6 mm thick rubber gasket with necessary nuts and bolts etc., complete all as specified and directed by Engr-in-Charge.

Supply only DI Specials size upto 600mm dia such as Bends(any type, radius and angle),tapers any type, stright, bend, increasing, dectreasing or double socket/flange etc. Tee pieces single ranch, "Y" junction double branch, cross (all sockets or spigot and socket) collars, caps and plugs ,Flanges etc complete all as speicified and directed by Engr-in-Charge.

Excavation in trenches n.exc 1.5m width and n.exe 1.5m in depth and getting out in Soft loose/hard dense soil complete all as specified.

Returning filling including spreading, Levelling, Watering and well ramming of hard/ dense soil in layers n.exc 25cm deep complete all as specified

Removing excavated soil to a distance n.exe 50m and depositing where directed by Engineer-in-Charge at a level n exc. 1.5 m above the starting point

M&L sand cushioning using sand dry course locally available and to be laid in layers before and after the cables are laid all as specified and directed.

Supply and laying un-reinforced precast concrete cable cover, class HVP, Type 1 with peak, size 300mmx180mmx40mm all as specified and directed by Engr-in-Chage.

Supply and laying un-reinforced precast concrete cable cover, class LV, Type 1, flat, size 250mmx150mmx40mm all as specified and directed by Engr-in-Chage.

M & L for Non-return valve of size 50mm dia,PN 1.6, conforming to IS complete all as specified and as directed by Engr-in-Charge.

M & L for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed including two coats of aluminium paint over a coat of red oxide zinc chrome primer including preparation of surfaces complete all as specified & as directed.

Supply only MS specials such as bends (any type, radius and angle) tapers any type, straight, bend, increasing, decreasing or double socket etc.) tee pieces single branch, "Y" junction, double branch, cross (all sockets or sockets and spigot) collars, caps and plugs upto 600 mm bore.

M&L for Toping of water coolents for radiator assembly complete all as specified & as directed.

M&L preparation of old painted steel surfaces of any description, any width or girth, not otherwise described and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for rectification of existing defective flanged joints with rubber or fibre gasket complete with necessary nuts, bolts, flanges and washers all as specified for the 600mm DI K9 pipes complete all as specified and as directed. Note:- (a) quoted rates are inclusive of cutting of DI pipes, jointing materials and preparation of new flanged sockets and refixing the same at existing place.(b) necessary DI pipe & fittings will be measured and paid separately

M & L for repair of control panel board of water/electrical supply including renewal of defective unserviceable spare parts i.e. Control wiring, lugs, cable glands and decarbonising of busbars including changing of burned busbars as necessary of requirement, cleaning panel board externally and painting the panel board with existing colour code complete all as specified and directed.

M&L for Glow sign board by taking down old u/s boards of size 1.5X0.9x0.6 in mtrs internally fixing of 4X40 Watt LED light fitting, printed with name of installation , loocation details as provided including fixing material and nut ,bolts , clamps and necessary joining material complete all as specified and directed by Engr-in-Charge.

Surface dressingn exc 15cm deep including removing debris to a distance not exc 50 m complete all as specified.

M&L for repairs to sluice valves by applying greasing, glands, nut & bolts and misc complete all as specified and directed.

M&L for replacement of sluice valve operating SS wheel of size upto 600mm dia complete all as specified and directed.

M & L for painting of installed pump sets including motors, connected pipes laid within pump house area as per exisiting colour code with one coat of synthetic enamel paint for Centrifugal/Monoblock pump sets of capacity upto 20 HP including writing letters with paint SM/MES, Seriel No. and vintage of pumps complete all as specified and directed .

Cleaning and Painting of transformer of capacity 160kVA with one coat of existing colour code complete all as specified and directed . Note:- 1. Painting shall be done with existing colour codes and painting shall apply with help of spray gun use of air compressor. 2. Quoted rate also included for after completion of painting and area should be clean well.

Cutting of tree branches, cleaning of bushes/small plants surround the E/M installations including removing debris to a distance not exc 50m complete all as specified and directed.

Cleaning and Painting of RMU/VCB with one coat of existing colour code complete all as specified and directed . Note:- 1. Painting shall be done with existing colour codes and painting shall apply with help of spray gun use of air compressor. 2. Quoted rate also included for after completion of painting and area should be clean well.

M &L for DG Set C check 160 kVA including replacement of pistons, cranks, piston rings, o rings, seals, necessary valves, gland packing, Inlet/Exhaust valve plates as per OEM manufacturers mannual complete all as specified and direted.

All as per Serial Item No.70.00 here-in-before but for 100 kVA Capacity

Dismantling of radiator complete from DG sets cleaning/scrapping of depositing manually from outside of the radiator, cleaning of all copper tubes of radiator with descalling solution from inside & outside with forged feed method & with water and aircompressor (by using separate chemical pump water pump & compressor) plugging of all leakage in welding, brazing of copper tubes, cleaning of fins and replacement of gaskets etc for the capacities of DG sets upto 100 to 200 kVA complete all as directed .

All as per Serial Item No.72.00 here-in-before but of capacity 10kVA.

Supply and replace foot valve suitable for 50mm dia pipe complete all as specified and directed by Engr-in-Charge.

M&L for Automatic voltage regulating unit suitable for 100 to 160 KVA DG set capacity as per OEM manufacturers mannual/recommendations complete all as specified and directed.

M&L for Automatic voltage regulating unit suitable for 200 KVA DG set as per OEM manufacturers mannual/recommendations complete all as specified and directed.

M&L for repairs/replacement to sensors of electric water meter complete all as specified and directed by Engr-in-Charge.

M &L for flame proof light fitting of 1X20 Watt capacity, PF>0.95, 100 lumes/watt, 220V complete all as specified and directed by Engr-in-Charge.

S & F in replacement 50mm dia Gun-metal globe or gate valves,with iron wheel head, screwed both ends for iron pipe. complete all as specified and directed

All as per Serial Item No.81.00 here-in-before but of 80 mm dia size

Supply and laying GI tubing of 50 mm bore medium grade including all fittings such as bend, elbow, tee and union on floors/ walls/ceilings .including taking down old unserviceable one complete all as specified and directed

All as per Serial Item No.83.00 here-in-before but of size 25mm dia.

M&L for graded course aggregate of size 40mm/20mm for filling at Four pole structure areas

M&L for replacement of HDPE pipe 50mm bore of pressure rating 6kgf/sqcm laid in trenches including connected accessories complete all as specified and directed.

Supply, laying, testing and commissioning of HT XLPE insulated, screened with extruded PVC inner sheathed, PVC bedded, galvanised steel strip or wire armoured electric power cable [heavy duty] of size 3 core x 95.00Sqmm, with stranded aluminium conductor, 11000 volts grade, suitable for earthed system with and including cable glands, ferrules and connected accessories, laid in trenches or ducts or through the pipe etc including disconnecting and taking down old unserviceable cable complete all as specified and as directed by Engineer in charge.

Supply, jointing and testing Cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm,11000 Volts complete with all acessories including taking down old joint Make : Birla 3m, Denson

Supply & fix in replacement of fully automatic Change over switch, cubical type with arc chute of capacity 400 Amps, range 63A to 400A, AC 23A, 4P conforms to latest IS/IEC codes with inter chargeable dual shaft position with site convertibility and flip-able handle able 400A capacity in LT panel, including necessary interconnections of cables and control wiring, complete all as specified and as directed.

All as per Serial Item No.88.00 here-in-before but for capacity 630 Amps.

M&L for replacement of 250 watt LED light fittings suitable for highmast lighting incl suitable driver, housing with necessary nut & bolts complete.

Supply and fix in replacement single pointed air termiation aluminium rod 12 mm, 300mm long complete all as specified and as directed by the Engineer-in-Charge

M & L for test point terminal block made of gun metal or phosphorus bronze size 75x72x25mm drilled and screwed including 3 nos 8mm dia 25mm long hex head screw complete all as specified and as directed by the Engineer-in-Charge

M & L for aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground with heavy duty plastic insulator complete all as specified and as directed by the Engineer-in-Charge

M&L for Earthing lead of 25x4mm galvanised iron strip with suitable size of nuts, bolts and washers complete.

Supply & replacement of level indicator 36" dia as per IS and including numbering with radium stickering, heavy duty float, counter weight , heavy duty driving gear nylon wire fitted in all in GI housing cutting with RCC slab and making good the slab ,painting the exposed surface with two coats of synthetic enamel over a coat of red oxide primer complete all as specified and directed by the Engineeri-in-Charge. Note: Make of water level indicator shall be got approved by GE before Procurement.

Supply and fixing in replacement LED flood light 200 W of New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65/66 roadway luminaire with high power LEDs as light source and electronic driver suitable for bldgs complete all as specified and directed by the Engineer-in-Charge. [Make: Surya Roshini / Philips / Bajaj / CG / Havells / Wipro / GE]

M&L for GI pipe bracket made of 25mm dia pipe light grade of length not less than 1.2m bent to shape as required fixed with and including necessary MS clamps, bolts, nuts and washers duly painted with two coats of synthetic enamel paint over a coat of red oxide primer including taking down oldunserviceable complete all as specified and directed.

Taking out defective submersible openwell pump set of capacity 10 HP from open well/UG sump for repair by lifting GI tubing of size 65 mm from up to 40feet to 10 to 15feet depth after disconnecting electrical and pipe line connection, complete by means of chain pully block or other T & P, transporting to workshop including repair/replacement of worn out parts, servicing and overhauling complete with oilling/greasing, lubricating the parts and reassembling and painting of submersible pumpset with motor with one coat of synthetic enamel paint after clearing and scrubbling and shifting back to openwell/ UG Sump, lowering commissioning and testing on full load complete all as specified and directed by Engineer-in-charge. Note:- (i) The rate quoted for this item shall includes labour charge only for maint repair and replacement of defective / UNSV spares / accessories. Spares are to measured and paid separately under subsequent items. (ii) Cost of other minor items/spares such as nut, bolts washers, gaskets, paints etc which are not covered under Sch 'A' but required for effective functioning of the plant shall be deemed to included in this item.

All as per Serial Item No.99.00 here-in-before but monoblock pumpset of upto 5.5HP capacity

Supply only following items / parts for 10HP submersible openwell pump set. (a) Thrust bearing for 10 HP complete all as specified and directed.

(b) Gun metal bearing bush.

(c) Stainless steel studs and nuts

(d) Impeller

(e) Seal

(f) Impeller key

(g) Rotor sleeve

Supply only following items / parts for upto 5.5 HP munoblock pump set. (a) Thrust bearing

(b) Gun metal bearing bush.

(c) Stainless steel studs and nuts

(d) Impeller

(e) Seal

(f) Impeller key

(g) Rotor sleeve

Supply and fixing in repair 25W LED bldg security light including with GI bracket of 25mm bore with MS clamps, nut-bolts complete all as specified and directed .

M&L for repairs to Industrial machine with suitable accessories as per OEM recommendations complete all as specified and directed .

M&L for repair/replacement to Hot Range with replacement of suitable plates, cables and necessary nut & bolts complete all as specified and directed .

Supplying and laying of CPVC pipes SDR 11 including fittings in trenches/floor/wall complete all as specified as required complete all as directed.

Supply and fix in replacement of battery capacity 12V 6AH omplete all as directed.

M&L for servicing/repairs to Solar PV panels of capacity 100/110Watt omplete all as directed.

S&F in replacement of Butterfly valve of size 200mm dia omplete all as directed.

Supply and laying MS ERW pipe of size 200 mm bore, 5.6 thick for inserting the pipe in in trenches/ floor or in plane area position and including making leak proof joints and including taking down old pipe complete all as specified and directed by Engineer-in-Charge.

M&L for Poly Alum chlorite for removal of water turbidity and impurities complete.

M&L for Naocl Sodium Hypochlorite for disinfection of water complete all as specified and directed.

Supplying and fix in replacement of MCCB, 630 Amps, 4 pole, 415 Volts, AC supply, having breaking capacity Icu = 50 KA with adjustable load setting from 70 % to 100 % complete all as directed.

Supplying and fix in replacement of MCCB, 300 Amps, 4 pole, 415 Volts, AC supply, having breaking capacity Icu = 36 KA with adjustable load setting from 70 % to 100 % complete all as directed.

Supplying and fix in replacement of MCCB, 125 Amps, 4 pole, 415 Volts, AC supply, having breaking capacity Icu = 16 kA with adjustable load setting from 70 % to 100 % complete all as directed.

Supplying and fix in replacement of MCCB, 63 Amps, 3/4 pole, 415 Volts, AC supply, having breaking capacity Icu = 10 kA with adjustable load setting from 70 % to 100 % complete all as directed.

M&L for repairs to 30min backup UPS Panel with incomings for upto 10KVA capacity incl spare parts items as required complete all as specified and directed by Engineer-in-Charge.

M&L for Capacitor Bank 10 KVAR capacity suitable to existing model and make Advance/ABB/Equivalent

M&L for Capacitor Bank 05 KVAR capacity suitable to existing model and make Advance/ABB/Equivalent

Servicing/repairing of the Split/casette type AC 0.9 to 02 ton capacity from its existing position and refixing of the same after repairing including/cleaning filter removing internal dust by using air blower and vacuum cleaner, oiling, greasing wherever required including checking / testing after completion all as specified and as directed. Note : Unserviceable/defective items which is required to be replaced shall be measured and paid separately.

All as per Serial Item No.132.00 here-in-before but Outdoor type AC 4.8TR

M&L for replacement of burnt compressor including dismantling the unserviceable burnt after disconnecting suction/discharge side copper tube bolts rubber pads and washers connecting copper tubing by welding blazing nut flaring and repairing of gas leakage if any and complete in the following cooling appliances all as specified and as directed. (a) Casette type AC/split type AC of 0.9 ton capacity

Casette type AC/split type AC of 2 ton capacity

Casette type AC/split type AC of 4.8 ton capacity

M&L for replacement of Lockout/Tagout Station with 2 adjustable shelves, with transparent facia like do not operate, on/off etc (15 Nos)

M&L for Calibration of HT 11KV VCB the relays, Ammeter,Voltmeter as per OEM recommendation by qualified technician complete all as directed. Note:- (i) the cost of techinian included in the quoted rates. (ii) The minor spares required deemed to be included in the quoted rates.

Supply and laying of cables XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 3.5 core 240 Sqmm including disconnectiong & taking down old U/s complete all as specified and directed.

All as per Serial Item No.139.00 here-in-before but of size 3.5 core 95 Sqmm

All as per Serial Item No.139.00 here-in-before but of size 4.0 core 25 Sqmm

All as per Serial Item No.139.00 here-in-before but of size 3.5 core 25 Sqmm

All as per Serial Item No.139.00 here-in-before but of size 4.0 core 16 Sqmm

M&L for replacement of battery charger of capacity 12V with 12 Amps for DG sets including nut & bolts as required complete all as specified and directed.

Supply and replacement of battery capacity 12V 26AH of model EP 26-12 complete all as specified and directed.

K C ENTERPRISES

P JAGANNADHA RAJU

GVR CONSTRUCTIONS

LAKSHMI SAI CONSTRUCTIONS