Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.1 LAccepted-Finance | L1 | Accepted-Finance Accept | |
| 2 | L2₹15.2 L+₹12,711 (0.84%)Rejected-Finance 2 A NARENDRA APPARTMENT CENTRAL JAIL ROAD SUBHASH BRIDGE AHMEDABAD 380027 | AHMEDABAD | AHMEDABAD | GUJARAT | 380027 | L2 | Rejected-Finance Rejected due to bidder No L1 | |
| 3 | L3₹15.6 L+₹47,470 (3.15%)Rejected-Finance 622 INDRAPRASTH COMPLEX PANCHESWAR TOWER ROAD JAMNAGAR 361 001 | JAMNAGAR | GUJARAT | 361001 | L3 | Rejected-Finance Rejected due to bidder No L1 |
Tender Value
₹15.5 L
EMD Value
₹31,000
Closing Date
25 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Ravinder Sharma
Office of the GE (Army) Camp Hanuman, Ahmedabad - 380 004
CERTAIN BR AND EM REPAIR WKS IN MD ACCN OF DAD COMPLEX OF GE (A) AHMEDABAD
2023_MES_619549_2
8369/E8
Open Tender
Civil Works
Works
330 days
GE (Army) Ahmedabad
As per NIT
8 documents required · 8 mandatory
₹500
GE (Army) Ahmedabad
₹31,000
Yes
30 Nov 2023
1 Nov 2023
28 Nov 2023
1 Nov 2023
25 Nov 2023
8 Nov 2023
Amount
M&L for preparation of old treated surface of walls (plastered/unplastered ) including cornices, Pilasters etc by brooming down or steel wire brushing, scraping down smoke , soot moulds , moss and efflorescent salts, trading oil and greasy spots and applying two mm thick of wall care putty on wall all as specified and directed by the Engineer-in Charge.
M&L for preparation of old painted steel surface of any description in any position and location not otherwise described over 10 cms width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed by the Engr-in-Charge .
Ditto all as per item No 2 above but applying two coat of synthetic enamel paint on wooden surfaces complete all as specified and directed.
M&L Preparing Old surfaces plastered or unplastered of ceiling and applying two coats of white washing complete all as specified and directed.
Taking down cement plaster on brick walls etc. including racking out joints, hacking for key, scrubbing down with water etc complete as directed by Engr-in-Charge.
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick/concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and directed.
Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 on walls, finished fair & even
M&L newly plastered or un plastered surfaces of walls and applying two coats of oil bound distemper to wall surface complete all as specified and directed.
M &L Complete removal of existing treatment of old plastered surfaces of walls and applying two coats of oil bound distemper to wall surface complete all as specified and directed.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces
Complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces.
S & F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete complete all as specified and directed
Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed.
S&F 3mm thick frosted glass panes and glazing with oil putty & pins/spring pins complete in squares n.exc 0.50 sqm each panes complete all as specified and directed
S&F in repair repair 25 mm dia drapery rod fancy powder coated fixed to wall with bracket & knobs complete.
Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 sqm each complete all as specified and directed.
Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
Taking down shutter of any description but exc 1 sqm and n. exc. 2 sqm each complete all as specified
S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides incl decorative laminated sheet on both faces.
S&F 2nd hard wood 35mm thick glazed, and skeleton shutters open rebated & prepared to receive, glass, gauge etc. divided into squares with plain chamfered or rounded mitred and rebated any numbers and size of members of shutters as specifed in SSR Part I, Section 8, clause 8.24(a); supllied and fitted to chowkahts complete all as specified and directed.
S & F 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.
S&F 150 mm size aluminium anodised door handles.
S&F PVC door/cup board shutter 30 mm thick consting of frame made out of MS tube for top and botom rail with PVC sheet strip 20 mm width suitable PVC sheet bedding complete fixing to frame etc all as specified.
Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed in repair in opening as per specification and drawing complete as directed.
S&F in repairs 18 mm (+ 0.7 mm) thick, solid PVC sheet one side prelam sheet for cupboard shutter of density 600 Kg/Cbm bent 900 and finish at all edges at level for making egdes at level for making edge lipping/bending or 0.5 mm thick PVC sheet lipping at 4 edges using bonding tape etc complete all as per direction of Engineer-in-Charge and manufacturer specification.
S&F Stainless steel butt hinges medium weight 100mm long
S&F Aluminium anodised barrel tower bolt of extruded section 150 mm size complete all as specified and directed.
S&F aluminium alloy anodised sliding door bolt with hasp and stapple ( bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed.
S & F of mild steel work such as window guard bars door frme and similar work conforming to Fe – 290 Grade – E 165 complete all as specified and directed.
S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing and ladder (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe410-W (Gde-E-250) quality A
S & F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass including necessary channel frame work, including rubber gasket and frame with wire mesh of aluminium,and deco grill ,aluminium beading complete all as specified and as directed.
Supply & fix aluminium powder coated framed windows, any pattern, fixed/side hung/sliding Three track , AC opening using powder coated aluminium sections of approved make, with or without sash bars, suitable for 5 mm thick glazing and Aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm wire guaze, including necessary rubber packing, joining cleats, glazing clips, aluminium snap beading, handles, locking arrangementsetc, frame of window should be of 1.5 mm thick section & shutter sec including cutting down existing glazed/gauge shutter complete all as specified and as directed Note :Rates include all glazing/aluminium wire cloth, rubber packing, jointing cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth complete all as specified and directed
Taking up or down GI tubing 15/20mm bore pipe and connection including cleaning for refixing or removal from site as directed
Supplying and laying of 20 mm bore CPVC pipes SDR 11 and plain CPVC SDR 11 fittings in trenches, fixing on walls/ceiling or laying in floors complete all as specified
Supplying and laying of 16 mm bore CPVC pipes SDR 11 and plain CPVC SDR 11 fittings in trenches ,laid concealed in floor or wall including all fittings suitable for fixing of plumbing fixture complete all as specified
S&F 20mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.
Dismanting of PVC water tanks Exc 500 ltrs and n.exc 1000 ltrs capacity at any position and removing to store/ removing from site.
S & F 1000 ltrs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) incl connecting up pipes securing access covers etc as specified and as directed
S&F in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm bore all as specified.
Demolition of cement concrete in ground floors and pavings not exc. 15 Cm thickness (below/above ground level) all as directed.
M&L Renewing tiles in patches, area n exc 5 sqm including removing and cleaning old tiles preparing beds and laying or setting, jointing and pointing new or or old tiles complete (glazed or non skid tiles) including 15/10 mm thick CM in 1:4 all as directed.
S&F 50 mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall for spout etc complete including taking down old pipe complete all as specified and as directed.
S&F in repairs shower rose 125 mm dia/square of brass chromium plated fancy type with or without swivel joint suitable for fixing to 15mm bore GI pipe complete all as specified and directed.
S&F in repairs bib taps 15mm bore of cast copper alloy chromium plated fancy type, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed.
15mm dia stop valves, fancy type chromium plated with long shank and cup (conncelaed type) cast copper aolly screwed down high pressure, screwed both ends for iron pipe or for unions and fixed in repair
S&F in repair 15 mm bore 2-in-1 bib cock with flange complete all as specified and direcrted.
S&F CP Sink mixer with regular spout W/M 15mm dia fixed in repair complete all as specified and directed. Make : Prayag Cat No -PIS -55
S&F brass CP bottle trap 32mm for wash hand basin with inlet and outlet screwed for iron pipe, fixed in repairs. Make : PRAYAG,ESS-ESS,ELITE,GEM
S&F in repairs angle stop valve of cast copper alloy chromium plated (fancy type) screwed for iron pipe of 15mm bore all as specified. Make :- PRAYAG
S&F wall mounting Mixture valve of Chromium plated, 15mm bore fixed in repairs. Make : Prayag/Ess-ESS/Parko/GEM
S&F in repair 15 mm dia bore pillar taps cast copper alloy with capstan heads chromium plated fixed in repairs 15mm bore fancy type screwed down, high pressure with long screwed shanks and fly nuts, screwed down for iron pipe or for union.
S&F in repair CP towel rail complete all as specified and directed.
S&F in repair stainless steel plate rack for utensils of size 600 x 600 x 250 mm of approved pattern and design all as directed. Make : Silver Shine
S&F in repair vitreous china wash down water closet pan (pedestral pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete all as specified and as directed.
S&F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete all as directed.
S&F in replacement of PVC cabinet size 650 x 400mm, comprising of looking glass, space for bath soap, shampoo, tooth brush and paste, handle towel rail complete allas specified and as approved of any fo floowing makes :- HINDWARE / CERA / NEYCER / PARRYWARE/CLASSIC complete all as specified and directed.
S&F vitreous china ware wash basin, white flat back size 550 x 400mm excluding taps, waste chain and plug and porcelain stopper but including brackets fixed in repairs complete all as specified and directed.
Supply and fixed in repairs sinks with drainage board made of stainless steel 1mm thick sheet plugs, washers, waste coupling and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 915mm x 460mm & bowl size 410mm x 330mm x 160mm all complete as specified and as directed.
S&F 10 ltrs capacity PVC valve less, syphonic action type flusing cistern, low level white with inlet ball valve float and handle including brackets fixed in repairs complete all as specified and directed.
S&F vitreous china water closed (squatting pan), orissa patern size 580 x 440mm white with integral, foot rests an including 'P' trap and lime bedding making doog to floors complete fixed in repairs complete all as specified and directed.
S&F in repair health faucet with one meter tube and hook complete all as specified and directed.
S & F 15mm size PVC connections with PTMT nuts of length 450mm and fixed in repairs complete all as specified and directed.
S/F grating doom 150 mm size of PTMT (Minimum weight 100 gms) complete all as specified and directed.
S&F 32mm dia PVC waste pipe fixed in repairs. Including Cup bracket complete all as specified and directed.
Taking down CI/PVC/AC soil pipe with fittings from wall, treches of any description including fittings.
S & F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.
S&F 110mm dia PVC bends of any radius acess door.
S&F 110mm dia PVC (SWR) branch piece single (single 'Y') equal or unequal with acess door.
S&F PVC(SWR) 75 mm dia soil waste and rainwater drainage pipes (6 kgf / sqcm) single socketed in any length with rubber ring joint laid in floor or fixed on wall all as spd & directed.
S & F 75 mm bore C I soil waste and vent pipes sand cast, in any length with or without ears with cement jonts fixed to wall.
S & F in repair 75 mm bore PVC (SWR) bends 75mm ( any radius), diminishing pieces or tapers ( larger bore measured).
S & F in repair 75 mm bore PVC (SWR) branch pieces, single ( equal or unequal), ordinary or inverted ( spigot or socket type) or with parallel branches.
S&F in repairs 75mm bore PVC (SWR) floor trap long body type with grating including jointing with solvent cement.
S&F in repairs 125/110mm bore PVC (SWR) gully trap plain with grating including jointing with solvent cement.
S& F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M & L Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over incl screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete all as specified and directed.
M&L for Light shade vitrified ceramic tiles 10mm thick, (square or rectangular) polished,area of each tile n. exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed CM 1:6 all as Specified.
All as per item No 80 above but on vertical surfaces such as skirtings, dados and risers to steps etc incl rendering 10mm thick on of brick work or concrete surfaces in cement mortar 1:4 complete
M&L for Glazed ceramic coloured tiles in vertical surface 450 x 350 x 7mm thick set and jointd in neat cement slurry and pointed in whie or coloured cement to match pigment over and including 10mm thick CM (1:4) backing coat Tiles shall be of grade B-III as per IS-13712 (1993) of First quality all as specified & directed
Taking down carefully surface aluminium or copper point wiring with PVC casing-caping (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete.
M&L for point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - R,Y,B, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting of switches, sockets, fan regulators complete including making good the wall surfaces with matching colour on wall. - Note : Including Cutting chases,pinning in ,making good for facings where required and pointing the cement mortar 1:3 to ends or edges of landings,steps,cills,sun shades,shelves,lintels etc and cutting chases for concealed conduit wiring etc and making good ,cutting not exceeding 10cm grith all as specified and directed.
One light point controlled by one switch.
One fan point /Exhaust fan point controlled by one switch.
One socket outlet 6 amp controlled by one switch on the same board with other switches.
One socket outlet 6 amp controlled by one switch on indepdendent board.
One bell point controlled by one bell push.
M&L for point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 2.5 sqmm (Phase - R,Y,B, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with suitable and required size of modular box, plate with cover complete for one 16 amp socket outlet controlled by one switch on independent board including making good the wall surfaces with matching colour on wall complete all as specified and directed.
M&L for point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - R,Y,B, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including PVC casing-caping not less than 32x12 mm ISI marked ivory colour with all fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators complete.
One light point controlled by one switch.
One fan point /Exhaust fan point controlled by one switch.
One socket outlet 6 amp controlled by one switch on the same board with other switches.
One socket outlet 6 amp controlled by one switch on indepdendent board.
One bell point controlled by one bell push.
M&L for point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 2.5 sqmm (Phase - R,Y,B, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including PVC casing-caping not less than 32 x12 mm ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover complete for one 16 amp socket outlet controlled by one switch on independent board Cable.
S&F angle holder, insulated polycabonate body with back plate complete.
S&F switch piano flush button single pole one way 6 amp complete.
S&F switch piano flush button single pole one way 16 amp complete.
S&F bell push, flush type, 6 amp 240 volts complete.
S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete.
S&F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete.
S&F ceiling rose 3 plates polycarbonate body complete.
S&F hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up complete.
M&L for submain wiring alongwith earth continuity conductor with PVC insulated FR-LSH multistranded copper conductor cable (Phase - R,Y,B, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories of following nominal sizes.
2x4 sqmm + 1x4 sqmm earth wire in 20 mm dia conduit.
2x6 sqmm + 1x6 sqmm earth wire in 25 mm dia conduit.
M&L for submain wiring alongwith earth continuity conductor with PVC insulated FR-SH multistranded copper conductor cable (Phase - R,Y,B, Neutral - Black, Earth - Green) drawing into into including PVC casing-caping not less than 25x12 mm ISI marked of following nominal sizes
2x4 sqmm + 1x4 sqmm earth wire.
2x6 sqmm + 1x6 sqmm earth wire.
S&F modular switch one way 6 amp 1 module,make MK electrical/Anchor/legrand all as specified and directed
S&F modular switch one way 16 amp 1 module make MK electrical /Anchor/legrand all as specified and directed
S&F modular socket 6/16 - 2/3 pin combined 2 module make MK electrical all as specified and directed
S&F modular socket 6 amp 2/3 pin combined 2 module make MK electrical /Anchor/legrandall as specified and directed
S&F Ceiling rose 6 amp, 3 plates polycarbonate body make MK electrical /Anchor/legrand complete
S&Fmodular bell push 6A 1 module make MK electricalall /Anchor/legrand as specified and directed.
S&F Bell AC, 230 V single pole complete make MK electrical all as specified and directed.
S&F modular hum free electronic step fan regulator, 100 watt 2 module make MK electrical /Anchor/legrand all as specified and directed
Supply and Fix LED Batten 20 watt tube light fiiting complete with decorative type fitting 4 feet long with Light Linear with its bright light output at 100 lumen/watt give batten type complete including all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core 6500K ( fittings shall be fitted on two plastic square/round block. Note power factor should not be less than 0.90.Sqmm, PF>0.9 all as required at site or directed.
Supply and Fix in replacement existing unsv sleek LED mirror light fitting 2 feet long 1x10 W including LED tube 2 feet long of same make having ballast, bipin holder, connector block etc complete all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core,6500K , PF>0.9 all as required at site or directed.
Supply and fixing LED bulk head light fitting 1X10watts complete including connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of suitable size all as required.
Supply and fixing sheet metal enclouser single pole and neutral with a 2 pin and earth plug and socket 20 A 240V complete with one single pole MCB of capacity 20 A complete all as specified and directed.
S&F MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.
S&F LED 20W Bldg security light made up of pressure diecast housing with presmatic polycarbonate diffuser and individual LEDs with secondary optic and IP65 protection complete with fixing arrangement and connection as directed.
Replacement of AC film capacitor 2.5 mfd, 440 volts suitable for any type ceiling fan in FR plastic casing including connection complete. Make - Havells cat ref no. 2.5 mfd / 440V / PLWW / 25x45.
S&F MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-
Single pole 6 to 32 amp.
Double pole 6 to 32 amp.
Note for MCBs & MCB DBs:- MCBs & MCB DBs shall be of the same make.
Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete.
Taking downexisting sheet metal enclosure single pole and neutral with a 2 pin and earth plug and socket 20A 240V complete all as directed
Taking down carefully aluminium or copper submain wiring with PVC casing caping / PVC surface conduit and making good disturbed surfaces complete.
Taking out old hermetically sealed compressor unit (uncut) from water cooler storage type, 40 ltr/hr cooling capacity and replacing the sealed unit with factory reconditioned sealed unit of same brand as per existing the following:-
Connection to suction/discharge pipe with necessary repairs and brazing.
Replacing capillary tube of existing size and copper liquid filters.
Flushing of entire system before gas charging.
Gas charging and testing after repairs including installing the machine at site and testing on full load for its smooth functioning complete.
M&L for gas charging to compressors of undermentioned installed machine/equipment to its full capacity with specified grade of refrigerant including other connected process required for gas charging and testing complete for the following :-
Water coolers 40 to 60 ltr/hrs cooling capacity.
Air conditioner split type AC of 1.5/ 2.0 Ton capacity.
S&F in repairs condensor (heat exchanger) coil for any make water cooler of 40 ltr capacity with necessary cutting / welding and brazing work to match with existing condensor complete.
S&F in repairs condensor (heat exchanger) coil for any make window type AC 1.5 Ton capacity with necessary cutting / welding and brazing work to match with existing condensor complete.
S&F in repairs condensor (heat exchanger) coil for any make split type AC 1.5 Ton capacity with necessary cutting / welding and brazing work to match with existing condensor complete.
S&F in repairs condensor (heat exchanger) coil for any make split type AC 2.0 Ton capacity with necessary cutting / welding and brazing work to match with existing condensor complete.
S& F of relay package assembly with over load protector of water cooler 40 litre/hour cooling capacity for any make including necessary electrical connection, lugs, insulation tape etc all complete.
S& F of relay package assembly with over load protector of water cooler 60 litre/hour cooling capacity for any make including necessary electrical connection, lugs, insulation tape etc all complete.
M&L for rewinding of fan motor of water cooler of any make with super enameled copper wire of existing size and weight as required including replacement of bushing and capacitor of 2.5 mfd complete.
M&L for rewinding for fan motor of air conditioner of any make and model with super enameled copper wire of existing size and weight including replacement of bushing as required.
S& Fof fan blade of water cooler of 40 to 60 litres per hour cooling capacity suitable for any make and model as required.
S& F of 15 mm dia concussive push taps of cast copper alloy, screwed for iron pipe for water cooler complete.
Taking out hermetically sealed compressor unit (uncut) from the window type air conditioner of any make, 1.5 Ton capacity and replacing the sealed unit with reconditioned sealed unit complete. Make of compressor :- Tecumesh -1500 / Kirloskar-5522/CR-22 including the following:-
Connection to suction/discharge pipe with necessary repair and brazing.
Replacing the capillary tubes of existing size and copper liquid filter
Flushing of entire system before gas charging.
Gas charging and testing after complete repairs including installation of the machine at site and testing on full load for its smooth functioning complete.
All as per item No 15.01 to 15.04 above but for split type AC 1.5 Ton capacity. Make - Kirloskar CR-22, Tecumesh-1500/5522 including following.
All as per item No 15 above but for split type AC 2.0 Ton capacity. Make - Kirloskar 5531/Tecumesh 2000, CR 30 including following.
S& F of relay with overload protector for AC split type 1.5 Ton capacity including necessary electric connections, lugs, insulation tape etc complete.
S& F of relay with overload protector for AC split type 2.0 Ton capacity including necessary electric connections, lugs, insulation tape etc complete.
S& F of air filter suitable for split type AC of 1.5 / 2.0 Ton capacity as required.
S& F of sheet metal enclosure, single pole & neutral with two pin & earth plug and socket with one MCB single pole 20 amp, 240 volts complete.
S& F of (45+4) multyfunctional mfd run capacitor for AC 1.5 Ton capacity including necessary electrical connections, lugs, insulation tape etc complete
S& F of (50+6) multyfunctional mfd run capacitor for AC 2.0 Ton capacity including necessary electrical connections, lugs, insulation tape etc complete
S& F of 10 mfd run capacitor for water cooler including necessary electrical connections, lugs, insulation tape etc complete.
Servicing of split AC or window AC by cleaning the whole equipment, washing of filters, minor adjustments/repair, washing condenser unit any make and capacity complete.
S& F of plug top 16 amps 3 pin for complete.
S& F of plug top 6 amps, 3 pin complete.
S&F in repairs remote circuit panel suitable for split type AC of 1.5/2.0 Ton capacity including necessary electrical connections, lugs, insulation tape etc complete. Make - Carrier, LG, Blue Star, Amtrex, Panasonic.
M&L for recharging of F22/R-32 gas in split type air conditioner 1.5 Ton capacity with specified process complete.
S& F of swing motor for split type AC of any type and make as per existing.
S& Fof contactor relay for split type AC as per existing.
S& F of 3 pin metal socket & plug top for AC point single phase 240 volts, AC ISI marked.
S& F of MCB single pole 240 volts, 10 to 32 amps, 10 kA, 'C' series, ISI marked complete.
S& F of copper tubing including brazing, flaring & testing of size 1/ 2" and 1/4" in required length including PVC insulation complete.
S& F of fan motor of capacity 1/35 HP suitable for 40 to 60 ltrs cooling capacity of water cooler complete.
S & F of blower motor 2 Ton split type AC, single phase all as per existing.
S& F of submain wiring along with earth continuity conductor with PVC insulated FR multistranded copper conductor cable (Phase-Red, Neutral-Black, Earth-Green) drawing into and including concealed rigid non metallic PVC conduit medium grade, ISI marked ivory colour 20 mm dia along with accessories of following nominal sizes:-
2x4 sqmm + 1x4 sqmm earth wire.
2x6 sqmm + 1x6sqmm earth wire.
Taking down defective ceiling fan,ceiling fan(BLDC), exhaust fan and wall mounting fan and air circulator fan of any make type & sweep including checking the serviceabilty of fan in the presence of MES representative and transporting the same to work shop for repairs and rehanging in position after repairs complete
M&L for opening of ceiling fan, exhaust fan and wall mounting fans and air circulator fans (any type, make & sweep) at workshop including refitting / assambling, testing after repairs/replacement of following unserviceable parts :
Supply only 3 core PVC insulated overall PVC sheathed standed copper conductor cable 0.5sq mm sizes
Supply only Ball bearing No 6201 suitable for fan of existing make, type & sweep complete
Supply only 4 MFD suitable for existing complete.
Supply only 2.5 MFD suitable for existing complete.
Rewinding of electric fan motor (Any make, type) with existing size of super enameled copper wire of good quality including treating with insulation varnish & heating including providing insulating material such as cotten tapes, insulating paper etc. for Ceiling fan of 1200 mm sweep complete.
All as per item No:187 above but BLDC ceiling fan of 1200 mm sweep
All as per item No :187 above but Exhaust fan of 450 mm sweep
All as per item No : 187 above but Exhaust fan of 300/200/250 mm sweep
All as per item No : 187 above but Wall mounted Cabin fan up to 400 mm sweep
Supply fixing PCB Controller for BLDC Ceiling fan of 1200mm sweep
Supply fixing Rotor magnet for BLDC Ceiling fan of 1200mm sweep
Supply fixingy Remote for BLDC Ceiling fan of 1200mm sweep
All as per item No 194 above but Down rod 600 mm long
Shree Krushna Supply Corporation
kudrat enterprise
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .