CONSTRUCTION WORK OF ONE ROOM FOR X-RAY BASED FULL BODY SCANNER AT RAJKOT CENTRAL JAIL (INCLUDING ELECTRIFICATION WORK) (1st Attempt)

Name of Work:- CONSTRUCTION WORK OF ONE ROOM FOR X-RAY BASED FULL BODY SCANNER AT RAJKOT CENTRAL JAIL (INCLUDING ELECTRIFICATION

Statement showing the approximate quantities for the items of the above work to be carried out and

Cost put to Tender for Rs.

Total Quated Rate in Total

Item No. Description of Item Unit

Quantity Rate Rs. In Words Amount Rs.

(A) CIVIL WORK:

Excavation for foundation upto 1.5 Mt. depth incluing sorting out and stacking of useful materials Rupees Two Hundred

1 and disposing of the excavated stuff of any lead & Lift. (C) Hard Murrum 36.00 Cum. 278.94 Seventy Eight and Paisa

Ninety Four Only

Excavation for foundation upto 1.5 Mt. depth incluing sorting out and stacking of useful materials Rupees Two Hundred Eighty

2 and disposing of the excavated stuff of any lead. (D) Soft Rock 12.00 Cum. 288.42 Eight and Paisa Fourty Two

Providing & Laying Cement Concrete 1:3:6 (1cement : 3-coarse sand:6 M/C stone aggregates of Rupees Three Thousand

3 40 mm nominal size) curing complete,excluding cost of formwork in Foundation & Plinth. 4.00 Cum. 3035.06 Thirty Five and Paisa Six

Providing and laying controlled cement concrete M - 250 including finishing smooth with curing Rupees Four Thousand Six

etc complete Including the Cost Of Form Work Of Plywood Only With Fair Finish And Proping Hundred Ninety Six and

4 Must Be Of Steel Only So As To Give A Fair Finish but excluding cost of reinforcement Rate also 10.00 Cum. 4696.71 Paisa Seventy One Only

inclusive of providing & mixing of plasticiser as per approved make in propotion as per mix design

for R.C.C. work in Column Footing.

Providing and laying controlled cement concrete M -250 including finishing smooth with curing Rupees Nine Thousand One

complete(Including the Cost Of Form Work Of Plywood Only With Fair Finish And Proping Must Be Hundred Twenty Nine and

Of Steel Only So As To Give A Fair Finish but excluding cost of reinforcement Rate also inclusive Paisa Twenty Two Only

of providing & mixing of plasticiser as per approved make in propotion as per mix design for

R.C.C. work in IN COLUMN having any cross sectional area of Column upto Plinth.

Providing and laying controlled cement concrete M - 250 and finishing smooth with curing etc Rupees Seven Thousand

complete Including the Cost Of Form Work Of Plywood Only With Fair Finish And Proping Must Be Three Hundred Sixty Nine

Of Steel Only So As To Give A Fair Finish but excluding cost of reinforcement and Rate also and Paisa Twelve Only

inclusive of providing & mixing of plasticizer as per approved make in propotion as per mix design

for R.C.C. work in in PLINTH BEAM for any cross sectional area of beam.

Providing & Laying Cement Concrete 1:4:8 (1cement : 4-coarse sand:8 M/C stone aggregates of Rupees Two Thousand

40 mm nominal size) curing complete,excluding cost of formwork in Foundation & Plinth. Seven Hundred Twelve and

Paisa Seventy Three Only

BRICK WORK using common burnt clay building bricks having crushing strength not less than 35 Rupees Four Thousand

8 Kg./Sq. cm. In FOUNDATION AND PLINTH in cement mortar 1 : 6 ( 1 cement : 6 coarse sand ( 10.00 Cum 4302.59 Three Hundred Two and

Conventional Bricks ) Paisa Fifty Nine Only

Total Quated Rate in Total

Item No. Description of Item Unit

Quantity Rate Rs. In Words Amount Rs.

Filling available excavated earth (excluding rock ) in trenches, plinth sides of foundation etc. in Rupees One Hundred Thirty

9 layers not exceeding 20 cms. in depth consolidation each deposited layer by ramming and 38.00 Cum 136.11 Six and Paisa Eleven Only

Applying general insecticide pest control treatment to floors, cupboards etc including labour Rupees Ninety and Paisa

materials etc. complete. Using Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075% concentration Seventy Two Only

by mass) is recommended 10.5ml chemical diluted with 5 liters of water application 0.5 litre

chemical /Sqm of surface is recommended as per I.S.

Supplying and Filling in plinth with sand under floors including watering, ramming, consolidation Rupees Four Hundred

11 and dressing etc.complete 3.00 Cum. 472.58 Seventy Two and Paisa Fifty

Providing and laying cement concrete 1:5:10 (1-cement;5-coarse sand;10- M/C stone aggregates Rupees Two Thousand Five

of 40mm nominal size) and curing etc.complete excluding cost of formwork in foundation and Hundred Fifty One and Paisa

plinth. Fifty Seven Only

Providing & laying Controlled Cement Concrete M-150 and curing etc. complete excluding the Rupees Four Thousand

cost of form work of plywood only with fair finish & proping must be of steel only so as to give a Seventy Nine and Paisa Sixty

fair finish but excluding the cost of reinforcement for reinforced concrete work in (A) Foundations, Four Only

footings, Base or columns and Mass concrete. Rate are also inclusive of providing and mixing

Plasticizer of approved make in proportion as Per Mix Design.

Providing and laying controlled cement concrete M-250 including finishing smooth with curing Rupees Eleven Thousand

complete Including the Cost Of Form Work Of Plywood Only With Fair Finish And Proping Must Be Twenty Nine and Paisa

Of Steel Only So As To Give A Fair Finish but excluding cost of reinforcement Rate also inclusive Eighty Eight Only

of providing & mixing of plasticiser as per approved make in propotion as per approved make in

propotion as per mix design for R.C.C. work in in IN COLUMN having any cross sectional area of

Column at Ground floor.

Providing & Laying Autoclaved Aerated sand based Cement Concrete (AAC) Masonary Blocks Rupees Five Thousand Nine

Confirming to I.S. 2185 (Part - 3) having Compressive Strength not less than 4.00 N / mm2 (Heavy Hundred Ninety and Paisa

strength) and Jointed with Block Jointing Adhesive mortar having Tensile Strength of not less than Fourty Two Only

15 0.8 N / mm2 and ensuring long lasting thermal insulation according to European Norms (EN13501- 60.00 Cum 5990.42

2) suitable for High Performence of External & Internal Concrete Walls, Joints having thickness in

thin layer 3mm to 4mm between masonary units. Masonary Blocks need not to Pre-Wet the

Blocks or Post Cure the Wall with Water. for Ground floor

Providing and laying controlled cement concrete M - 250 including finishing smoothwith curing Rupees Eight Thousand Nine

etc complete Including the Cost Of Form Work Of Plywood Only With Fair Finish And Proping Hundred Twenty Five and

16 Must Be Of Steel Only So As To Give A Fair Finish but excluding cost of reinforcement Rate also 1.00 Cum 8925.27 Paisa Twenty Seven Only

inclusive of providing & mixing of plasticiseras per approved make in propotion as per mix design

for R.C.C. work in Lintel for Ground Floor.

Providing and laying controlled cement concrete M - 250 including finishing smoothwith curing Rupees Six Thousand One

etc complete Including the Cost Of Form Work Of Plywood Only With Fair Finish And Proping Hundred Thirty Three and

17 Must Be Of Steel Only So As To Give A Fair Finish but excluding cost of reinforcement Rate also 4.00 Cum 6133.57 Paisa Fifty Seven Only

inclusive of providing & mixing of plasticiseras per approved make in propotion as per mix design

for R.C.C. work in Lintel Bend for Ground Floor.

Total Quated Rate in Total

Item No. Description of Item Unit

Quantity Rate Rs. In Words Amount Rs.

Provinding and Laying controlled cement concrete M-250 for reinforced conerete CHHAJJAS Not Rupees Nine Thousand Nine

exceeding 10cm thickness up to floor two level including finishing the exposed surface with Hundred Twenty Nine and

cement mortar 1:3 ( 1 cement : 3 fine sand) to give a smooth surface ,centering and formwork and Paisa Seventy Only

18 curing complete. Including the Cost Of Form Work Of Plywood Only With Fair Finish And Proping 1.00 Cum 9929.70

Must Be Of Steel Only So As To Give A Fair Finish excluding cost of reinforcement for ALL FLOOR.

Rate also inclusive of providing & mixing of plasticiser as per approved make in propotion as per

Provinding CEMENT VATA (10cm x 10cm) size quarter round in cement mortar (1 : 1) including Rupees Twenty Four and

neat cement finishing, watering etc. Complete. Paisa Four Only

Providing and laying controlled cement concrete M - 250 including finishing smooth with curing Rupees Nine Thousand Two

etc complete Including the Cost Of Form Work Of Plywood Only With Fair Finish And Proping Hundred Twenty Three and

Must Be Of Steel Only So As To Give A Fair Finish but excluding cost of reinforcement Rate also Paisa Seventy Nine Only

inclusive of providing & mixing of plasticiseras per approved make in propotion as per mix design

for R.C.C. work in Beam having any corss section area of BEAM for Ground Floor.

Providing and laying controlled cement concrete M - 250 including finishing smooth with curing Rupees Seven Thousand

etc complete Including the Cost Of Form Work Of Plywood Only With Fair Finish And Proping Seven Hundred Thirty Five

Must Be Of Steel Only So As To Give A Fair Finish but excluding cost of reinforcement Rate also and Paisa Eighty Six Only

inclusive of providing & mixing of plasticiser as per approved make in propotion as per mix design

for R.C.C. work in Slab of thickness 13 CM to 15 CM for Ground Floor.

Providing TMT Bars Fe-500/500D reinforcement for RCC work including cutting, bending, binding Rupees Seventy Six and

22 and placing in position etc.complete for all floors.(Brand As Approved By GSPHC) 5300.00 Kg 76.52 Paisa Fifty Two Only

Providing 10 mm thick cement PLASTER in single coat on ceilings for interior plastering and Rupees Two Hundred

23 finished even & smooth in C.M. 1: 3 ( 1 cement : sand ) including finishing with a floating coat of 29.00 Sqm 220.40 Twenty and Paisa Fourty

neat cement slurry at GROUND FLOOR. Only

Provinding 15 mm thick cement PLASTER in single coat on brick or concrete wall for interior Rupees Two Hundred

24 plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including finishing with 166.00 Sqm 220.04 Twenty and Paisa Four

floating coat of neat cement slurry at GROUND FLOOR. Only

Synthetic Texture Plaster with Double Coat Smooth plaster : Rupees Four Hundred Eighty

Providing 20mm thick cement plaster in single coat plastering upto any height Outside and Six and Paisa Fifty Seven

finished even and smooth (MALA) in (i) Cement mortar 1:3 (1-cement : 3-sand) as Base Coat and Only

25 providing 2-3 mm thick synthetic texture plaster of approved texture (Material Shall be Used as 131.00 Sqm 486.57

Approved By GSPHCL Only ) including cost of all materials, labour, conveyance, loading and

unloading, taxes, royalties, scaffolding, watering etc.complete for any Height as per Drawing and

instructions of Engineer -in -Charge.

Total Quated Rate in Total

Item No. Description of Item Unit

Quantity Rate Rs. In Words Amount Rs.

Providing, Supplying and Fixing of 32mm (Total) Thick Single Flush Door Shutter with 1mm Thick Rupees Eight Thousand Nine

Laminates on Both Side of Shutter. Making / Construction of Flush Door is with Pine or southern Hundred Eighty Six and

Yellow Pine Filler and 2.5mm core veneer Both Side and 0.4mm Face Veneer on Both Side with Paisa Seventy Eight Only

Lock rail on Center. Flush Door Provide with Teak wood beading patti (32mm X 12mm) on

Peripheries of Flush Door with Door Frame of Non Teak Solid Wood of size 120mm x 65mm with

26 Chemically Treated and Seasoned Including Paint Matching with Laminates. Frame & Flush door 5.00 Sqm 8986.78

shutter having 5 year warranty against attack of biological agent like termite, borers, decay, fungi

and harmful insects also warranty against seasoning related issues like crack, bending, twisting,

warping. Laminates on shutter shall be press by cold press method. Shutter shall be brought to

site in packed PVC bags & pvc coating shall be removed on completion of work in such a way that

shutter & Frame is free from nail mark & any damages etc.

Rates are also Inclusive of all Labors & Proviging 15cm. Long 6 No of Hold Fast (25mm X 5mm) &

No of 6 Inch S.S. but Hinges, 100mm x 75 mm x 3mm thick, required Screw & Nails per Frame and

Fixing following S.S. Fixtures And Fastening.

(1) Aldrops 1 No, 250mm x 16mm & Tadi 1 No, (2) Door Stopper 1 No, 100mm Long, (3) Double

Leg Heavy Push Door Stopper 1 No & (4) Handle 2 No, 150mm Long X 10mm thick. Door are Fixing

as per Details Drawing & Instruction of Engineer in charge. All Materials Used Shall be as Per

approved Material Make List of G.S.P.H.C. The Required Frame is to be Obtained from Vanil

Udhyog Maked Only.

Providing and fixing solid PVC Flush Door shutter 24mm thick(Three Layer),made from Co- Rupees Four Thousand Five

extruded three layer rigid PVC foam sheet(single Extruded) with density not less than 600kg/cbm Hundred One and Paisa

outer layer (0.8-1mm)thick should be rigid PVC with density of not less than 1400kg/cbm. Door Ninety Six Only

27 should be water proof,Termite proof ,fire retardant&having good screw holding 3.00 Sqm 4501.96

capacity.proviidng and fixing 100% Solid Wood Plastic composite(WPC) Door Frame 90mmx45mm

made from wood plastic composite(single Extruded Process)material with density 780kg/cbm .all

as per specifications drawing as directed by the engineer in charge.

Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm thick tile flooring over 20 mm Rupees One Thousand

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on Seven Hundred Ninety Five

existing flooring by adhesive including dismentaling of existing flooring and material jointed with and Paisa Thirty Only

color cement slurry including finised with flush pointing & cleaning the surface etc.Completed

Brand of the tiles shall be as per approved make list of GSPHCL. Shade & Size of tiles shall be as

specified in tender item.

Providing and laying 25mm thick Double Pre polished (Dimond Policed) POLISHED Rupees One Thousand One

KOTAH STONE FLOORING over 20mm average thick base of cement mortar 1:6 (1 Hundred Eight and Paisa

cement; 6 coarse sand) over and jointed with grey cement slurry including rubbing and Thirty Only

polishing etc. complete for All floors.

Providing & Laying 24" x 24" in Skirting riser of steps and dado Double Charge vitrified 8 to 10 Rupees One Thousand Four

mm thick tile over 10 mm thick Cement plaster of cement mortar 1:3 (1 cement: 3 coarse sand) Hundred Fourty Five and

30 jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. 2.00 Sqm 1445.20 Paisa Twenty Only

complete Brand of the tiles shall be as per approved make list of GSPHCL. Shade & Size of tiles

shall be as specified in tender item.

Total Quated Rate in Total

Item No. Description of Item Unit

Quantity Rate Rs. In Words Amount Rs.

Providing and laying 25mm thick Double Pre polished (Dimond Policed) POLISHED KOTAH Rupees One Thousand Two

STONE Skirting over 20mm average thick base of cement mortar 1:6 (1 cement; 6 coarse sand) Hundred Eighty Five and

over and jointed with grey cement slurry including rubbing and polishing etc. complete for All Paisa Eighty Only

Providing & Laying 24" x 24" vitrified 8 mm thick tile flooring over 20mm (average) base of Rupees One Thousand Four

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by Hundred Fifty Eight and

adhesive material including dismentaling of existing flooring and jointed with color cement slurry Paisa Thirty Three Only

including finised with flush pointing & cleaning the surface etc.complete for antiskid. Brand of the

tiles shall be as per approved make list of GSPHCL. Shade & Size of tiles shall be as specified in

tender item.Size 600mm X 600mm

Provinding & laying Printed / Coloured GLAZED TILES 8 mm thick in skirting, risers of steps and Rupees One Thousand Five

DADO on 10mm thick cement plaster 1: 3 ( 1 cement : 3 coarse sand ) & jointed with white Hundred Fifty Three and

cement slurry.(300mm x 600mm) Paisa Sixty Three Only

Celling painting (two coats) with plastic emulsion paint on undecorated wall surface to give an Rupees One Hundred Ninety

even shade including throughly brushing the surface free from mortar droppings and other Six and Paisa Sixty Eight

foreign matter and sand papered smooth With Applying two coats of Fine Putty & One coats of Only

34 primer on new wall surface to give an even shade including thoroughly brushing the surface free 29.00 Sqm 196.68

from mortar dropping and other foreign matter and sand papered smooth. paint, primer and

putty shall be as per approved make list of GSPHCL

Wall painting (two coats) with plastic emulsion paint on undecorated wall surface to give an even Rupees One Hundred Eighty

shade including throughly brushing the surface free from mortar droppings and other foreign Five and Paisa Seventy Four

matter and sand papered smooth With Applying two coats of Fine Putty One Coat of Primer on Only

35 new wall surface to give an even shade including thoroughly brushing the surface free from 166.00 Sqm 185.74

mortar dropping and other foreign matter and sand papered smooth.paint, primer and putty shall

be as per approved make list of GSPHCL

Finishing wall with Weather proof exterior emulsion paint on wall surface (Two Coat) over and Rupees One Hundred Fifty

above applying one coat of primer to give an required shape even shade after throughly Brushing Five and Paisa Twenty One

36 This surface to remove all Dirt and remains of loose poweder material etc. complete. Primer shall 164.00 Sqm 155.21 Only

be exterior weather coat and Paint shall be Appex Weather Emulsion Only Paint and primer

shall be as per approved make list of GSPHCL

Providing & Fixing to Wall Ceilling and Floor SWR Rain Water pipe as Per IS-13592 of 90mm Dia Rupees Three Hundred

Complete with Special flings, Compressor type Fittings, Wall clips on wooden patty including Two and Paisa Fifty Four

37 making good the ceiling and floor on terrace rain water pipe shall be 90 mm Dia. SWR horizontal 18.00 Rmt. 302.54 Only

pipe and vertical pipe and 90mm bend at the end near by Ground level rate are Inclusive of all

Necessary Fittings required.

Total Quated Rate in Total

Item No. Description of Item Unit

Quantity Rate Rs. In Words Amount Rs.

Provinding and laying inegrated cement based proofing treatment of required thickness over the Rupees Eight Hundred

roof including 10mm thick waterproofing cement plaster in cement plaster in cement mortar1:3 Twenty Six and Paisa Fifty

and chaina mosaic fitting and finally finishing the surfase with white cement slurry and slopping Four Only

out taerrace slabs with following specification laid to required slope not flatter than 1:80 ( the

thickness of water proofing treatment near rainwater outlet or the lowest point of the

38 finishedslope shall not be less then 45mm, including treating the vertical surfaseof the parapet 23.00 Sqm 826.54

wall up to 20cms . height above finished level of terracing including finishing the top with joint

less water proofing plaster , curing , testing etc. complete. Rate is including ten years performance

of guarantee bond to be given on stamp paper. (No extra shall be paid for increase in thickness for

(A) Applying and grouting a slurry coat of neat cemnt using 2.75 kg/sqm. of cement admixed with

properly water proofing compound conforming to IS -2645 and 10 mm thick water proofing

cement plaster in Cement mortar 1:3 over the R.C.C.slab incl. cleaning the surface before

(B) Layign cement corcretre using broken brick bats 25mm to 40mm size with 50% of cement

mortar 1:4 (1cement :4 coarse sand ) over 10mm thick water proofing cement plaster in cement

mortar 1:3 (1 cement ,3 coarse sand) admixed with proprietary water proofing compound

conforming to IS 2645 to required slope and treating similarly the adjoining walls up to 200mm

height incl. rouding of junction of walls.

C) After Two Days of proper curing applying a second floor of cement slurry

(D) Finishing the surface with china mosaic pieces laid on 10mm thick joint less cement plaster of

mix 1:3(1 cement :3 coarse sand )admixed with proprietary water proofing compound conforming

to IS :2645 and finally finishing the surface with trowel with neat cement slurry

(E) The whole terrace so finished shall be flooded with water for a minimum period of two weeks

for curring for final taste

All above operation to be done in order and as directed and specified by the Engineer In Charge.

Providing I.S.I. mark 7 levers three keys brass pad lock of Navtal (Godrej) make 65mm dia on Rupees Two Hundred Fourty

39 completion Project.. 1.00 No. 243.64 Three and Paisa Sixty Four

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with Rupees Six Hundred Ninety

grade of concrete M300 pnumatic compressed / vibrated mechanically and as per approved Eight and Paisa Fourteen

40 design Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and filling the joint 26.00 Sqm 698.14 Only

with sand in proper line and level as

per guidlines of IRC : SP 63-2018 etc. Complete.

Providng and fixing Pre Cast concrete Kerb stone of grey cement based concrete block 30cm Rupees Three Hundred

length, 30cm height and 15cm thick of M250 grade concrete as per approved design and including Seventy One and Paisa

excavation for fixing in proper line and level,filling the joints with C:M 1:3 (1: Cement,3: Sand) etc Twenty One Only

comp. as per instructed by engineer In charges.

Total Quated Rate in Total

Item No. Description of Item Unit

Quantity Rate Rs. In Words Amount Rs.

Providing & fixing Concealed Center Point to wall celing & floor CPVC (SDR-13.5) PIPE having Rupees Two Hundred Six

National Sanitation Foundation (NSF) seal For Portable Water of 20 mm. dia. nominal bor tube and Paisa Seventy Three

fitting and clamps including making good the wall, ceiling and floor etc. Complete Only

Providing & fixing Concealed Center Point to wall celing & floor CPVC (SDR-13.5) PIPE having Rupees Two Hundred Fifty

National Sanitation Foundation (NSF) seal For Portable Water of 25 mm. dia. nominal bor tube One and Paisa Thirty One

fitting and clamps including making good the wall, ceiling and floor etc. Complete Only

Providing & fixing Concealed Center Point to wall celing & floor CPVC (SDR-13.5) PIPE having Rupees Three Hundred

National Sanitation Foundation (NSF) seal For Portable Water of 32 mm. dia. nominal bor tube Thirty Four and Paisa Eighty

fitting and clamps including making good the wall, ceiling and floor etc. Complete Nine Only

Provinding and fixing gun metal check or non return full way WHEEL / HANDLE VALVE 32 mm dia. Rupees Four Hundred

45 1.00 No. 416.47 Sixteen and Paisa Fourty

Providing & Fixing 15mm One way BIB Tap with wall flange Rate are inclusive of all material Rupees Nine Hundred

,Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Ninety and Paisa Sixty One

46 instruction of Engineer incharge. The model & Make of bib tap shall be as per the approved Make 1.00 No. 990.61 Only

Providing & Fixing Angle Cock with Wall Flange. Rate are inclusive of all matreials, Labour & Rupees Six Hundred Sixty

Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Five and Paisa Fifty One

Instruction of Engineer In charge. The Model & Make of Angle Cock Shall be as per the Approved Only

Make List of GSPHCL.

Providing & Fixing 25mm Concealed Heavy Duty Stop Cock with Exposed Part & Other Accessories Rupees One Thousand Two

(Sleeve, Lever, Wall Flange) . Rate are inclusive of all matreials, Labour & Necessary Fittings etc. Hundred Thirty Three and

48 Complet as per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. 1.00 Nos. 1233.57 Paisa Fifty Seven Only

Materials used for the above items Must be list approved by G.S.P.H.C.L.

Providing & Fixing to wall,ceiling and floor S.W.R soil waste pipe with 'O' ring of ISI1359/92.Rate Rupees Two Hundred Fourty

inclusive of all fittings like single or double 'Y' with door,reducer,coupler single T with door bend, Five and Paisa Seventy Four

PVC pipe clip etc.complete and making good the wall,ceiling and floor. 75 mm dia. Type B Only

Providing & Fixing to wall,ceiling and floor S.W.R soil waste pipe with 'O' ring of ISI1359/92.Rate Rupees Four Hundred

inclusive of all fittings like single or double 'Y' with door,reducer,coupler single T with door bend, Seventy One and Paisa

PVC pipe clip etc.complete and making good the wall,ceiling and floor. 110 mm dia. Type B Thirty Six Only

Provinding and fixing in position PVC COWEL VENT to pipe 75 mm dia directed. Rupees Sixteen and Paisa

Fourty Seven Only

Provinding and fixing in position PVC COWEL VENT to pipe 110 mm dia directed. Rupees Twenty Eight and

Paisa Sixteen Only

Total Quated Rate in Total

Item No. Description of Item Unit

Quantity Rate Rs. In Words Amount Rs.

Providing and fixing in positon ISI marked Rotational moulded Polyethylene double layer Rupees Three and Paisa

cylindrical vertical storage tank (IS : 12701 ) water tank size including making inlet and outlet. Ninety One Only

53 Overflow and wash out arrangement with GI connection including using necessary M H for 1000.00 Lit. 3.91

connection etc. Complete with closed cover including applying two coats of oil pianting outside

the tank etc complete.

Provinding and fixing CPVC SWR Multi Trap of the following nominal dia. Self cleaning design with Rupees Five Hundred Eight

54 top jali and stainer including cost of cutting and making good the walls and floors 100mm inlet 1.00 No. 508.29 and Paisa Twenty Nine Only

and 50mm outlet. Including 150mm x 150mm stainless steel jali.

Providing and fixing WALL HUNG with PVC Flush Tank , Soft seat cover & Intergal "P" or "S" Trap Rupees Five Thousand Four

including jointing the trap with pan and soil pipe. Wall hung shall be fixed on S.S.heavy duty rack Hundred Seventy and Paisa

bolt having 16mm dia,165mm length using Plastic sleeve make by using drill bitt only. Rate are Ninety Only

55 inclusive of all material ,Labour & Necessary Fittings etc. Complete as per Detailed Drawings, 1.00 No. 5470.90

Specifications and as per the instruction of Engineer incharge. The model & Make of wall hung &

Flush Tank shall be as per the approved Make List of GSPHCL

Providing & Fixing Health faucets (ABC Body). Rate are inclusive of all material ,Labour & Rupees Five Hundred Sixty

Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Five and Paisa Fifty One

instruction of Engineer incharge. The model & Make of Health faucets shall be as per the Only

approved Make List of GSPHCL

Providing & Fixing Single Hole Wash Basin with C.I or M.S. brackete & M. I . fisher union, P.V.C Rupees One Thousand Three

water pipe with Connection from Stop Cock to Pillar Tap,PVC Bottle Trap with connection 32mm Hundred Fourty Four and

dia. C.P. brassa waste coupling with Connection 32mm dia waste Pipe up to N.T etc. Complete. Paisa Thirty Four Only

57 Rate are inclusive of all matreials, Labour & Necessary Fittings etc. Complet as per Detailed 1.00 No. 1344.34

Drawings, Specifications and as per the Instruction of Engineer In charge. Materials used for the

above items Must be list approved by G.S.P.H.C.L.

Constructing brick masnory chamber for under ground C.I.Inspection chamber and bends with Brick having Rupees Three Thousand

crushing strength not less than 35 Kg/Sq.cm.in cement mortar 1:5,RCC top slab with1:3:6 in cement mortar Seven Hundred Ninety

1:5 ( cover with 8 mm dia. steel @ 15 c/c and R.C.C. top slab with 1:2:4 mix ( 1 cement : 2 coarse sand,4- Three and Paisa Eighteen

stone aggregates 20mm nominal size) foundation cocrete 1:5:10 inside laster 15 mm th. c:m 1:3 finished Only

smooth with a floating coat of neat cement on walls & bed concrete etc. complete. Rate are also inclusive of

outside plaster 15mm thick in C.M 1:3 from top of chamber and all side upto 45cm deep below ground

level (I) inside dimensions 455mm x 610mm and 450mm deep for Single or multi purpose pipe line. Rate

Also Inclusive RCC Frame with cover MD 10 ton (Rubber mould Finish) Inner Size 600 x 450mm with all

necessary fittings

Total Quated Rate in Total

Item No. Description of Item Unit

Quantity Rate Rs. In Words Amount Rs.

Providing and supplying of class SN8 structured wall polythene piping system (Pipe with online/offline Rupees Two Hundred

coupler and elastometric sealing ring) with non-smooth external Annular corrugated and smooth internal Twenty Nine Only

surfaces (Double wall) for non Pressure underground sewerage & Drainage application as per EN 13476-3

includind all local and central taxes,transportation, freight charges, octrol, inspection charges, loading,

unloading, convetance to the departmental stores etc. complete. (100mm ID dia) Including lowering, laying

and jointing of class SN8 structured wall. ( External Annular corrugated & smooth internal Surface)

polyethylene piping and fittings with the help of coupler (Online/offline) attached with one end pipes,

59 sliding over the elastometric sealing rubber ring placed on the specified valleu of the corrugation at the 10.00 Rmt 229.00

spigot end, lowering the same into the trench, laying on the lower bedding (construction at bottom of

trenches) at prescribed gradient depth & alignment testing the water tightness of the joints, ensuring the

continuity tests of specified pipe segment etc. complete as per drawing, specification & detailed

engineering, including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction

of engineering-in-charge.

Providing and supplying of class SN8 structured wall polythene piping system (Pipe with online/offline Rupees Three Hundred

coupler and elastometric sealing ring) with non-smooth external Annular corrugated and smooth internal Ninety Six Only

surfaces (Double wall) for non Pressure underground sewerage & Drainage application as per EN 13476-3

includind all local and central taxes,transportation, freight charges, octrol, inspection charges, loading,

unloading, convetance to the departmental stores etc. complete. (150mm ID dia) Including lowering, laying

and jointing of class SN8 structured wall. ( External Annular corrugated & smooth internal Surface)

polyethylene piping and fittings with the help of coupler (Online/offline) attached with one end pipes,

60 sliding over the elastometric sealing rubber ring placed on the specified valleu of the corrugation at the 20.00 Rmt 396.00

spigot end, lowering the same into the trench, laying on the lower bedding (construction at bottom of

trenches) at prescribed gradient depth & alignment testing the water tightness of the joints, ensuring the

continuity tests of specified pipe segment etc. complete as per drawing, specification & detailed

engineering, including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction

of engineering-in-charge.

Providing & Fixing Premium-grade structural plywood – offers high tensile strength, screw-holding Rupees Seven Thousand

capacity, and structural integrity to support heavy surface weights and High-Pressure Laminate Six Hundred Fourty Nine

1mm both side durable surface available in various colors and textures with Continuous, and Paisa Fifteen Only

unpierced 2mm thick lead sheet securely bonded using high-strength structural adhesives

(Favicol Heatx) Primary Applications in X-ray rooms, CT scan suites, PET scan rooms etc.

Total Civil Work (A) =

(B) ELECTRIC WORK:

Total Quated Rate in Total

Item No. Description of Item Unit

Quantity Rate Rs. In Words Amount Rs.

62A Providing & erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. mm copper PVC 12.00 Point 605.00 Rupees Six Hundred Five

insulted FRLSH wire with 1.5 sq. mm (green) copper PVC insulated FRLSH wire for earth Only

continuity in FIA approved ISI mark medium class white colour 20/25 mm dia. embossed rigid

PVC pipe with PVC fitting fixed with adhesive solution erected on/in Brick Wall / slab along with

continuous G.I. fish wire to draw wires and laid in approved manner zari for PVC pipe and boxes

shall be filled with cement mortar and finishing the surface to match the wall / ceiling complete

with approved make 5/6 Amp. ISI make modular type switch and accessories mounted in 20 G.

G.I. company fabricated metallic box covered with appropriate front plate modules erected flushed

with wall / ceiling with necessary modular lamp holder / modular ceiling rose / HD Connector as

directed for concealed wiring.(Deep Junction box 75mm depth if required)(Make & Model

approved by EIC and matching colour with switch and accessories) Light point. Cat.-III

Necessary sheet / tape / polythene / sand must be erected or filled in all box to prevent mortar

going into the box. Length of point wiring must not increase than 10 mtr. For that necessary switch

boards and their locations must be finalised before execution by agency otherwise payment will

not be done for extra long point. (For future extention, if required, agency has to erect one higher

size metal box and modular plate as per instruction of EIC. Cost of blank plate shall be paid as per

tender item) [This item include cleaning (inside/outside) of all G.I. switch boards, electric point

box, fan box, MCBDB & box cutting plaster finishing for modular plate without any gap] (Conductor

resistance should be as per IS:8130/1984)

62B For Fan Point (with 6 A. Modular type switch and two module hum free EME Five step Rotray 2.00 Point 842.00 Rupees Eight Hundred

type Electronic fan regulator both having ISI mark) Cat.-III Fourty Two Only

62C For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) Cat.-III 2.00 Point 636.00 Rupees Six Hundred Thirty

62D For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket both having ISI mark ) Cat.-III 2.00 Point 306.00 Rupees Three Hundred Six

63 Providing and erecting Medium Class FIA approved and ISI mark white colour (embossed) RIGID 50.00 Mtr. 24.00 Rupees Twenty Four Only

PVC PIPES of following size complete erected with necessary PVC fittings & Junction boxes fixed

with adhesive solution & clamps on / in wall / ceiling along with continuous fish wire to draw mains

with necessary fittings and junction boxes for following dia. (a) 20 mm. dia.

64 Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, chloride 10.00 Mtr. 275.00 Rupees Two Hundred

rigid material with ignition free & flame proof confirming BS .All necessary accessories and Seventy Five Only

measuring of following sizes. [1] 75 mm x 50 mm trunking.[MK, LEGRAND, OBBO make Only]

Total Quated Rate in Total

Item No. Description of Item Unit

Quantity Rate Rs. In Words Amount Rs.

65A Providing and laying Mains with FRLSH PVC Insulated wire ISI marked 1.1 KV grade in existing 30.00 Mtr. 81.00 Rupees Eighty One Only

FIA approved ISI mark medium class 20/25/32 mm dia. embossed rigid PVC pipe with PVC

fitting fixed with adhesive solution to be erected on/in block wall / slab along with continuous G. I.

fish wire to draw mains laid in approved manner with plastering by cement mortar & finishing the

surface to match the wall / ceiling complete with FRLSH PVC insulated wire for earth continuity.

(Approved ISI make only) (Conductor resistance should be as per IS:8130/1984 [a] 2 x

sq.mm. FRLSH copper multi stranded conductor mains with 1.5 sq.mm. FRLSH copper

multi stranded conductor for earthing as per standard colour code. (Conductor resistance

should be as per IS:8130/1984)

65B 2 x 2.5 sq.mm. FRLSH copper multi stranded conductor mains with 1.5 sq.mm. FRLSH copper 20.00 Mtr. 108.00 Rupees One Hundred

multi stranded conductor for earthing as per standard colour code. (Conductor resistance Eight Only

should be as per IS:8130/1984)

65C 2 x 4.0 sq.mm. FRLSH copper multi stranded conductor mains with 2.5 sq.mm. FRLSH copper 20.00 Mtr. 145.00 Rupees One Hundred

multi stranded conductor for earthing as per standard colour code. (Conductor resistance Fourty Five Only

should be as per IS:8130/1984)

65D 2 x 10.0 sq.mm. FRLSH copper multi stranded conductor mains with 4.0 sq.mm. FRLSH copper 20.00 Mtr. 307.00 Rupees Three Hundred

multi stranded conductor for earthing as per standard colour code.(Conductor resistance should Seven Only

be as per IS:8130/1984)

66 Providing & fixing 20 mm. dia. PVC insulated G.I. corrugated Flexible pipe with necessary socket, 20.00 Mtr. 30.95 Rupees Thirty and Paisa

PVC bushes saddle, Check-nuts etc. complete of following sizes. Ninety Five Only

67 Providing & Erecting Plug Point wiring with 1.1 KV grade ISI marked approved make 2 x 2.5 6.00 Point 930.00 Rupees Nine Hundred Thirty

sq.mm copper PVC insulated FRLSH wire with 1.5 sq.mm (green) copper PVC insulated Only

FRLSH wire for earth continuity in FIA approved ISI mark white colour medium class 20/25 mm

dia. embossed rigid PVC pipe with PVC fitting fixed with adhesive solution erected in brick

wall/slab along with continuous G. I. fish wire to draw wires and laid in approved manner zari for

PVC pipe & boxes shall be filled with cement mortar & finishing the surface to match the wall /

ceiling complete with 16 Amp Modular type Swich and accessories mounted in 20 G. GI company

fabricated metallic box covered with appropriate front plate modules erected flushed with wall. (a)

16 Amp switch & 1 No. 6/16 A universal 3/5 pin socket white colour suitable for 3 pin top

duly both having ISI mark mounted in 20 G. GI company fabricated metallic modular box

covered with appropriate front plate modules erected flushed with wall.Above accessories will be

erected combined or separately as per site requirement and instruction of EIC.. (Necessary

Sheet Must Be Erected On All Box To Prevent Mortor Going In To The Box) Cat.-III.

(Conductor resistance should be as per IS:8130/1984 )

Total Quated Rate in Total

Item No. Description of Item Unit

Quantity Rate Rs. In Words Amount Rs.

68 Providing and fixing Plug Point wiring with approved ISI marked 1.1 kv 2 x 4.0 sq.mm copper 2.00 Point 1087.00 Rupees One Thousand

PVC insulated FRLSH wire with 2.5 sq.mm (green) copper PVC insulated FRLSH wire for earth Eighty Seven Only

continuity in FIA approved ISI mark white colour medium class 20/25 mm dia. embossed rigid

PVC pipe with PVC fitting fixed with adhesive solution erected in wall/slab along with continuous

G.I. fish wire to draw wires and laid in approved manner. zari for PVC pipe & boxes shall be filled

with cement mortar & finishing the surface to match the wall / ceiling complete with 1 No. 16 Amp.

Modular type Swich and 1 no. 16 Amp. universal 3/5 pin socket suitable for 3 pin top duty.

[Both Having ISI mark must] mounted in 20 G. G.I. company fabricated metallic box covered with

appropriate front plate modules erected flushed with wall.Above accessories will be erected

combined or separately as per site requirement and instruction of EIC. Cat.-III. (A.C. POINT)

(Necessary Sheet Must Be Erected On All Box To Prevent Mortar Going Into The Box) (Conductor

resistance should be as per IS:8130/1984)

69 Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of 225 mm dia in soft 2.00 Each 7025.00 Rupees Seven Thousand

soil. Suitable for doing pipe-in-pipe technology earthing.Earthing electric rod must be made from Twenty Five Only

Corrosion free Hot dip galvanizing pipes having following specification.

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B ' Class ISI mark of Reputed

Brand, Inner pipe:- 42 mm minimum O.D., Pipe B Class ISI mark reputed Brand Terminal Size:

70mm X 100mm length, Terminal Should be made from inner pipe for that pipe must be pressed

and gave rectangular shape so its work as a terminal.The hot deep galvanising must be done

after above process.Galvanised thickness must be minimum 75 micron any where. SS Nut bolt:-

2 no.with washer suitable for 14mm dia. hole must be provided at terminal. total minimum

Weight(approx.) of earth electrodewith inside conductive material minimum should be 26 kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to retain moisture for long time

Back Filling Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of 400 mm X 400 mm X 400 mm depth

and Cover should be heavy duty cast iron with required size of 300 mm X 300 mm X 4 mm thick.

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only] [OEM has to submit

all detail & sample for approved before supplying]

[Water must be poured in bore before starting earthing. Earthing value must be measured with

earth tester. Agency has to bring the earth resistance to at least 02 ohms & voltage between

neutral & Earthing upto 02 volt. Agency has to maintain earthing & its value for one year. Earthing

must be done in the presence of A.E. (GSPHCL)]

Total Quated Rate in Total

Item No. Description of Item Unit

Quantity Rate Rs. In Words Amount Rs.

70 For above earthing additional charges for boring in hard rock soil (by breaker) & filling soft soil in 2.00 Each 325.00 Rupees Three Hundred

earth pit (certificate for soil have to given by DEE / AE along with photographs) Twenty Five Only

71 Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop-out 1.00 Each 890.00 Rupees Eight Hundred

approx. 2mm thick box complete with Bakelite connector strip 5way(3P+N+E),DIN rail for Ninety Only

mounting mcb & hinged doors as per requirement having locking arrangements with mounting

clamp with nuts, bolts & washers suitable for erection on pole with cable clamps& earth bolt of

following inner size of box. For300mm x 200mm x 100mm

72 Supplying and fixing radium sticker or Painting the number and words for inventory Identification 10.00 Each 22.00 Rupees Twenty Two Only

on erected fittings / equipment’s or Such accessories (MCBDB, Panel, Pole, Rack, Earthing,

Pump, Door etc.) as may required with good quality of enamelled paint or fade proof, weather

proof, waterproof high quality vinyl radium sticker for indoor / outdoor application as directed by

engineer in charge For up to 20 characters, up to 50 mm height.(The colour of sticker / paint

should be as per instruction given by EIC as per site requirement)

73 SITC of Indoor Commercial Recess / Surface mounted (IP20) 24 W Cool/Warm white Color LED 8.00 Each 1159.00 Rupees One Thousand One

Down lighter office Lighting Luminaire with separate potted driver with single piece pressure die Hundred Fifty Nine Only

cast aluminium alloy housing with corrosion resistant powder coated finish with

PMMA/PS/Injection moulded Polycarbonate diffuser with high brightness LED complete (only from

Philips Lumileds, CREE, Nichia, Bridgelux, Seoul &Osram) CRI > 80, CCT 5600K (5400 to 5800K

bin). The LED's should be mounted on back lit metal core PCB for better heat conduction and long

life of LED. The Fixture should comply all International Standard third party (LM 79 for complete

fixture, LM80 for individual LED). The Fixture have protection like miswiring, over voltage, over

load, wrong wiring, THD < 15%, P.F > 0.95, efficiency ≥ 100 lm/w & driver efficiency > 85%. For

24 W fixture wide voltage range from 160 V to 270 V, 50/60 HZ @ 240V application, 4 KV surge

The fixture must have min. 2400 lumen light output. The fixture should be provided with external

separate Potted driver, latest Valid BIS approved Luminaire and driver. The Fixture efficiency ≥

100 lumens/watt only for safety and performance. (L70 @ 30,000 Hrs.) The fixture should be able

to easily mount on POP / Grid false ceiling. The Luminaire should be tested as per IP 20 and

following test reports should be submitted at the time of approval: heat resistant test, thermal test,

Ingress protection test, drop test, Photobiological report with 3 core X 1.0 Sq.mm. flexible wire as

per site requirement [Note:-The manufacturer / authorized Channel partner of the manufacturer

has to submit 5 yrs. free replacement Guarantee for complete Fixture

74 Supplying and erecting 8 W LED lamps with following wattage capacity of 220 to 240 voltage, 1.00 Each 111.00 Rupees One Hundred

minimum 15000 burning hours life, 500 V in built-surge protection,Polycarbonate diffuser, Eleven Only

mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps integral type, with

PC diffuser suitable Lamp holder.

75 Providing and erecting Polycarbonate body surface mounting LED Bulk head type 9 watt 3.00 Each 780.00 Rupees Seven Hundred

Lighting Fitting with electronic driver having THD < 15%, CRI>80, P.F.0.95 And lumen output from Eighty Only

luminaire 720 lm, input voltage range 160-270 V AC, 50 Hz cool white (3000 to 6500 k), inbuilt

driver having efficiency >=80lm/w, -20 deg C to + 60 deg C working temperature, AL frame with

Beam Angle 120 deg.

Total Quated Rate in Total

Item No. Description of Item Unit

Quantity Rate Rs. In Words Amount Rs.

76 Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star rated, 2.00 Each 2603.00 Rupees Two Thousand Six

Ceiling fan with Brush Less Direct Current (BLDC) permanent ferrite magnet Motor, class of Hundred Three Only

insulation: B, Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit with earthing

provision, copper winding, Power factor not < 0.9, Service Value (CMM/W) minimum 6.85, Air

delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-2019), THD < 10%,

compitible with electronic regulator unit for Speed Control and all remaining accessories including

safety pin, nut bolts, washers, temperature rise = 75 degree C (Max.), suitable for 140 to

Voltage and rectifier circuit with surge, over current and overload protection , 50 Hz, Single phase

AC Supply, earthing etc. Complete as required and 3 core 0.50 sq.mm ISI wire as per site

requirment.(Agency has to erect safey wire with ceiling fan and checked with EIC) (Necessary test

reports should be submitted strictly at the time of approval. Sample approved by EIC subject to

above specification only) (A) 1200 mm Sweep (48")

77 Supplying & Erecting Fan Hook Of 10 mm M.S Round bar bounded to the RCC bars up to 50 mm 2.00 Each 125.00 Rupees One Hundred

Length each side & piereced through 18 Gauge G.I Box having 125 mm dia depth of 75 mm Twenty Five Only

complete erected concealed in ceiling with necessary modular plate / sheet.

78 Providing & erecting 240 V MCB Double pole switch for Motor & Inductive load (C curve) having 1.00 Each 360.00 Rupees Three Hundred

10 KA breaking capacity & confirms to IS:8828 in Existing M.S. box having following capacity. For Sixty Only

79 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA 1.00 Each 803.00 Rupees Eight Hundred

breaking capacity & confirms to IS :8828 in existing box having following capacity [c] 63 Amp. Three Only

80A Supplying & fixing box for housing RCCB + MCB combination made of 18 SWG sheet steel duly 1.00 Each 299.00 Rupees Two Hundred

powder coated with gasket, dust & vermin proof bakelite shield two earthing terminals for following Ninety Nine Only

type of RCCB, RCCB + MCB [a] For 2 pole [Same company metal box used as MCB / ELCB

used with earthing terminal with necessary Numbering / marking with oil Paint by painter]

80B [b] For 4 Pole [Same company metal box used as MCB / ELCB used with earthing terminal 1.00 Each 486.00 Rupees Four Hundred

with necessary Numbering / marking with oil Paint by painter] Eighty Six Only

Total Quated Rate in Total

Item No. Description of Item Unit

Quantity Rate Rs. In Words Amount Rs.

81 Providing ad erecting approved make single phase Double Door metal clad D.B. as per relevant 1.00 Each 6254.00 Rupees Six Thousand Two

indian standards ammended upto date. Hundred Fifty Four Only

Supplying and fixing following way CONCEALED TYPE single phase MCB distrubution board of

company fabricated sheet box with powder coated inside and outside after apply seven tank

chemical process of CRCA sheet cover complete with suitable integral single piece construction

tinned copper busbar and link with all necessary interconnection and with necessary size MS

frame for mounting MCBDB. MCBDB Door, Back side and Body of MCBDB must be made of

mm thick CRCA Sheet. Manufacturer must be provided (1) IP 43 and as per IS:8623-1 & 3, IEC

61439-1 & 3 having D type PU gasket. (2) Seven tank Powder coating Certificate (3) Tinned

Copper/Brass make neutral & Earthing link with isolation & Protecting Cover for 240 Volts on

surface / recess complete with loose wire box, terminal connectors for all incoming and outgoing

circuits, with suitable size FRLS PVC insulated copper conductor up to terminal blocks and

internal connection, tinned coppper bus bar, 1 no. tinned copper neutral link, tinned copper earth

bar, din bar, detachable gland plate, interconnections, powder painted including earthing etc.

Single phase incoming and horizontal single phase outgoing. For 16 Way MCBDB:

Including 1 no. 40 Amp. 30 mA double pole ELCB (ELCB confirming to IS:12640/1988

having sensitivity of 30 mA and breaking capacity of 10 KA), 1 no. MCB 40 Amp. double

pole switch (C curve confirms to IS:8828 having breaking capacity of 10 KA) and S.P. MCB

of rating 6 to 32 Amp. with NL suitable to operate on 240 Volt A.C. power. (6 Amp:- 4 Nos.,

16 Amp:- 4 Nos. & 25 Amp: 4 Nos.)

(The DBs should be used of same company of MCB / ELCB to be used) (MCBDB must be

erected in line & level with spirit level and finish the external edge with box cutting plaster) (Same

colour MCB(SP/DP) should be used as same as MCBDB) [Including Necessary numbering /

marking on box done with red colour radium sticker as per site requirement and instructions given

by EIC on site. Font / number size given by EIC on site as per requirement]

82 Supplying & erecting 12 mm thick backelite sheet of approved make and grade on existing 25 0.50 Sq. Mtr. 2289.00 Rupees Two Thousand Two

x 25 x 3 mm red oxide painted angle iron frame suitable for fixing ICDP SWITCH and energy Hundred Eighty Nine Only

meter (contractor shall make approved drawing of Bakelite sheet To arrange required No. of

Energy meter & ICDP/MCB switch-busbar etc. as per Actual space available in electrical room at

83 Providing and erecting metalic danger notice board for MEDIUM VOLTAGE installation to be 1.00 Each 69.00 Rupees Sixty Nine Only

erected as per I.S.

84A Providing and erecting following type of Modular Type Accessories mounted with 20 G company 10.00 Each 25.00 Rupees Twenty Five Only

fabricated metalic box, single mounting base frame covered with textured / metallic front plate,

modules erected with necessary connection. As desired by Engineer in charge. Blank Plate

Single. Cat.-III.

84B 6/16Amp. Universal socket 3.00 Each 198.00 Rupees One Hundred

Ninety Eight Only

84C 16 Amp. SP one way switch 3.00 Each 179.00 Rupees One Hundred

Seventy Nine Only

Total Quated Rate in Total

Item No. Description of Item Unit

Quantity Rate Rs. In Words Amount Rs.

85 Providing & erecting Switch board for Computer or electric apparatus consisting of following 1.00 Each 1122.00 Rupees One Thousand One

items in single board erected on Metal board with 3 mm thick PC (Polycarbonet) / Acrylic sheet Hundred Twenty Two Only

erected as directed. 2 no. 6/16 Amp. universal Socket, 2 nos. 16 Amp. switch, 2 nos.

Amp. Switch & 2 nos. 6 Amp. 3/5 pin Plug. For Computer power Supply board. Cat.-III.

86 Providing & erecting FRLSH XLPE (IS : 7098) (I)-88 ISI marked armoured Copper cable for 120.00 Mtr. 451.00 Rupees Four Hundred Fifty

1100 volt to be laid 90 cms. Under ground or to be laid 90 cms. Under ground or to be laid on wall One Only

with suitable G.I. heavy guage 1.0 mm thick cable clamp or in existing DWC pipe underground

or road crossing or floor of following size of cables.For 4 core x 4 sq.mm.

87 Providing & laying HDPE Double walled corrugated pipes (DWC) (conforming to IS: 16205 (part 100.00 Mtr. 117.00 Rupees One Hundred

24) 2018)) with minimum load required of 450N capacity with anti rodent and ultra violet material Seventeen Only

properties with necessary connecting accessories of same material at required depth to be laid

90 cms. under ground for laying of cable below ground / road surface for enclosing cable and

back filling the same to make ground as per original. (A) For Outer dia. 50 mm and Inner dia.

38 mm. ) (Test Certificate to be Submitted)

88 Providing & fixing double compressed heavy duty flange type brass cable gland with rubber ring 2.00 Each 43.00 Rupees Fourty Three Only

for P V C insulated armoured cable complete with outgoing tails, insulating tape etc. For following

size cables. For 2 to 4 core x 2.5/4.0 Sq. mm (Sigma, MCI, Comet Make Only)

89 Providing & fixing Solderless crimping type Copper lugs conforming to IS suitable for cable of 50.00 Each 8.00 Rupees Eight Only

following size evenly crimped with high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. [a] 1.5/2.5 to 6 Sq.mm

90 Providing and laying Mains with ISI marked, 1.1 KV grade electrolyte multi stranded, annealed 30.00 Mtr. 176.00 Rupees One Hundred

copper conductor with heat resistant PVC insulated conforms to IS:694, IEC - 227 erected in Seventy Six Only

existing pipe of following size (Specifically for control panel, relays, power switchgears, motor

starters & control wiring) with required size of copper lugs, nuts and bolts if required. ForOne wire

Total Quated Rate in Total

Item No. Description of Item Unit

Quantity Rate Rs. In Words Amount Rs.

91 Providing and fixing of ABC Type Store Pressure Fire Extinguisher Having capacity 6 kg 1.00 Each 1991.00 Rupees One Thousand Nine

Filled with Mono Ammonium Phosphate Powder 50% confirms to IS 4308, Stored Pressure Type, Hundred Ninety One Only

UGTS Pressure Gauge, Can Height 530 mm, Diameter 150 ± 10mm, Discharge Time 24 Sec,

Controllable discharge mechanism, Jet Range 5 Meters, Average Discharge is 92%, applicable on

Class A,B & C and electrically started Fire, Fire Rating 4A:144B, Can Construction : Deep drawn

& CO2 Mig welded, EPDM(Ethylene Propylene Diene Monomer) Rubber Hose with both end

Aluminum clamped, Internal Coating - Epoxy Powder coating, External Coating - Pure Polyester

Powder coating (UV Resistant),Brass forged CE Marked valves with NRV & Auto Safety Release

with safety Pin is of SS material, Made up from 1.6mm thick sheet, Extinguishers confirmed to

IS 15683:2018 and ISI marked. Referance Weight:-Gross Weight 8.9 Kg, Empty Weight 2.9 Kg,

1. Necessary certificate & and guarantee must be attached, 2. OEM has to provide wall mounting

heavy duty bracket/clamp, screw, hardware for installation. 3.Following printed marking

Manufacturing Date and Expiry Date must be mention on Extinguisher 4. Refilling period must be

of 3 Years. Following Printed marking on equipment must be required:- Model No, Capacity,

Gross Weight, Content, Fire Rating, Batch No, Serial no, Mfg Month, Refilling Due. [with

necessary numbering / marking with oil paint by painter as instructions given by G.S.P.H.C.L

engineer] (Make: KANEX, MINIMAX, CEASEFIRE)

92 Providing and fixing of CO2 type High Pressure Portable 4.5 kg Fire Extinguisher, filled with 1.00 Each 6526.00 Rupees Six Thousand Five

Co2 Gas as per IS 15222, Control discharge mechanism fitted with 1 Meter Wire Braided Hose & Hundred Twenty Six Only

Electrical non-conductor Polyethylene Flat Horn with Diffuser Nozzle for dispersed discharge of

CO2, Discharge Time 12 Sec, Average Discharge is 95%, Applicable on Class B, C and

electrically started Fire, Fire Rating 55B, Internal coating is not applicable & External coating is of

enamel spray painting, Powder Coated Handle, Valve Confirm to IS 3224 ISI Marked, CO2

Cylinder construction: hot spinning by seamless pipes & bearing ISI mark, Body confirms to IS

7285 and PESO ( Petroleum and Explosives Safety Organization) APPROVED, Minimum Wall

Thickness 4 to 4.2 mm, Extinguishers confirmed to IS 15683:2018 and ISI marked. Referance

Weight:-Gross Weight 16.4, empty weight 11.9 Kg, 1. Necessary certificate & and guarantee

must be attached, 2. OEM has to provide wall mounting heavy duty bracket/clamp, screw,

hardware for installation. 3.Following printed marking Manufacturing Date and Expiry Date must

be mention on Extinguisher 4. Refilling period must be of 5 Years. Following Printed marking on

equipment must be required:- Model No, Capacity, Gross Weight, Content, Fire Rating, Batch No,

Serial no, Mfg Month, Refilling Due. [with necessary numbering / marking with oil paint by painter

as instructions given by G.S.P.H.C.L engineer] (Make: KANEX, MINIMAX, CEASEFIRE)

Total Quated Rate in Total

Item No. Description of Item Unit

Quantity Rate Rs. In Words Amount Rs.

93 Providing and erecting Inverter based approved make split air-conditioning unit consisting of 1.00 Each 56271.00 Rupees Fifty Six Thousand

condensing unit with variable speed fan motor, inverter type hermetically sealed rotary Two Hundred Seventy One

compressor with accessories etc. duly connected separately erected evaporating unit and blower Only

motor with its accessories by means of extra supplied proper insulated copper tubing, drain PVC

pipes suitable for (cost includes Eco Friendly green gas charging and 15 A plug top & Remote

Control & MS Stand) with necessary core cutting. (1) For 3 Star Rating of current year (C) for

1.7 to 2 ton capacity.[make and model approved by EIC strictly as per tender specification]

94 Supplying and erecting insulated pair of soft copper tubing open or concealed including power and 10.00 Rmt. 1147.00 Rupees One Thousand One

control cable,necessary PVC drain pipes for Split/Cassette AC machine up to 4 TR capacity Hundred Fourty Seven Only

95 Executing All inclusive maintenance (service + Spare parts) contract for defect liability period 1.00 Job 5598.00 Rupees Five Thousand Five

as per tender Items & conditions. HVAC agency has to provide Four (04)(Dry Services and wet Hundred Ninety Eight Only

Services with water or Chemical as per site requirement ) services per year during Defect liability

period. One copy of necessary service reports duly signed by concern police officer and No

Defect certificate from police department at the time of releasing Security Deposit will be

submitted to DEE(Ele.), GSPHCL. Agency has to submit FDR of approved bank as per clause

2.0 section 3 Rs. 5598.00 + GST or quoted rate (with tender premium % above) whichever

is higher to G.S.P.H.C.L., for minimum maturity period of Five years in favour of

G.S.P.H.C.L., which will be released after successful completion of AMC and at the completion of

defect liability period. Without above service reports security deposit of whole project will not be

released. (Agency has to submit stability and performance certificate regarding AC system from

authorized dealer/OEM of AC) For 2.0 Ton Inverter type split air-conditioning unit

96 carry out RCC Core cutting- up to 100 mm dia./300mm thick Wall/beam/slab with providing PVC 2.00 job 1534.00 Rupees One Thousand Five

pipe of 3 mm thick inside and necessary finishing on both ends of wall . Hundred Thirty Four Only

97 Drilling the road without breaking the road surface (Asphalt) for laying of cable for feeding 20.00 Mtr 488.00 Rupees Four Hundred

power supply by making up to following size of holes at both ends complete. (A) Up to 100 mm Eighty Eight Only

98 Dismantling the existing light, fan, bell, independent plug point, wiring with mains of all types along 20.00 Point 1.00 Rupees One Only

with accessories etc. complete and handed over to dept.

99 Dismantling the existing switchgears, DB and Busbar of any size complete with / without board or 10.00 Each 7.00 Rupees Seven Only

angle iron frame.

Total Electrical Work (B) =

TOTAL (A + B) =

Executive Engineer (Elect.)(SP) Executive Engineer

Signature of the contractor GSPHCL GSPHCL