Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.2 LAccepted-AOC PR CDA SC PUNE 01 THROUGH AO GE DEHU ROAD | L1 | Accepted-AOC L1, Being lowest. | |
| 2 | L2₹33.4 L+₹1.1 L (3.32%)Rejected-Finance AGE B R WEST DEHU ROAD | BEED | MAHARASHTRA | 413207 | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹35.9 L+₹3.6 L (11.0%)Rejected-Finance | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹39.7 L+₹7.4 L (22.7%)Rejected-Finance RH NO 06 KARMA KSHETRA HOUSING SOCIETY SECTOR 29 PRADHIKARAN RAVET POST DEHU ROAD 412 101 | NA | NA | 412101 | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹40.4 L+₹8.1 L (24.9%)Rejected-Finance | L5 | Rejected-Finance Not being lowest |
Tender Value
₹42 L
EMD Value
₹84,000
Closing Date
3 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE DEHU ROAD
GE DEHU ROAD, PUNE
COMPREHENSIVE B/R AND E/M MAINT TO OTM/ADM BLOCK AREA AND DEPOT AREA OF ODTD UNDER AGE B/R (WEST) AT GE DEHU ROAD
2024_MES_662461_1
8888
Open Tender
Civil Works
Item Rate
270 days
GE DEHU ROAD
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE DEHU ROAD
₹84,000
Yes
29 Nov 2024
27 Jun 2024
5 Sept 2024
27 Jun 2024
3 Sept 2024
11 Jul 2024
Amount
Attending day to day complaints related to joinery work such as repairs to cupboard, kitchen shelves, pelmet box, easing of doors and windows, kitchen knobs fitting and fixing wire mesh, glass, repair of aluminum shutters etc as ordered/required on all working day to attend the complaint cell by rep of contractor at 0900am and report to complaint cell at every evening at 0500pm on daily basis after satisfactory complition,complete all as specified and directed. Material such as nails,screws, washers, putty/beading for glass, nut & bolts shall be included in the quoted rate. Note :- (i) The complaint against docket shall be taken from MES Complaint cell at every morning at 0900 am by rep of contractor on daily basis. (ii) Every docket will submitted at complaint cell on daily basis of same day at 0500 pm or early morning on next day after satisfacotry complition. (iii) Necessary T&P, equipment and safety gear shall be provided by the contractors. (iv) Rs. 122.00/complaint shall be recovered against non attending of every complaints. (v) Material will be measured (after fixing) and paid separatly as supply only under respective items.
Supply only in repairs stainless steel curtain rod 25 mm dia complete with bracket and side knobs all as specified and directed.
Supply only in repairs floor door stopper, with 150 mm long of Aluminium body and tounge with hard drawn steel spring in floor
Supply only in repair Galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm including necessary beadings and fillets complete all as specified and directed.
Supply only in repair 3mm thick sheet glass ordinary quality, in square or reqd shape n exc 0.50 Sqm each pane including oil putty complete all as specified and directed.
Supply only in repair200mm long mild steel barrel tower bolt, stove enamelled black with bright bolt complete all as specified and directed. .
Supply only in repair 250mm long sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.
Supply only in repaiur 150mm aluminium alloy handle, cast type, anodised
Supply only in repair door closer hydrau lically regulated,designation No.1universal type,, Aluminium body suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed.
Supply only in repair glass shelf assembly consisting of 5.5 mm thick sheets glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.
Supply only in repair Towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.
Attending day to day complaints related to water supply only & plumbing work such as leakage of bib cock,/pillar cock/ stop cock angle valve of any description changing the washers, cleaning of air lock in the pipe, leaking low level or high level flushing cistern by adjusting the float valve and including removal and replacement of rubber washer in PVC siphons and adjusting the float valve of over head tanks and leaking PVC bends/galvanised iron pipes etc as per site requirement on all working day to attend the complaint cell by rep of contractor at 0900am and report to complaint cell at same day at 0500pm on daily basis after satisfactory complition, complete all as specified and directed. Material such as threads, washers, lead etc shall be included in the quoted rate. Note :- (i) The complaint against docket shall be taken from MES Complaint cell at every morning at 0900 am by rep of contractor on daily basis. (ii) Every docket will submitted at complaint cell on daily basis of same day at 0500 pm or early morning on next day after satisfacotry complition. (iii) Necessary T&P, equipment and safety gear shall be provided by the contractors. (iv) Rs. 109.00/complaint shall be recovered against non attending of every complaints. (v) Material will be measured (after fixing) and paid separatly as supply only under respective items.
Supply only in repair water tank cover for tanks of size 500 ltr or 1000 ltrs complete all as specified and directed.
Supply only in repair PVC seat cover for EWC of white colour complete all as specified and directed.
Supply only in repair 15 mm bore bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
Supply only in repair 15 mm bore long body bib tap, fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
Supply only in repair 15 mm bore Stop valves/, cast copper alloy, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
Supply only in repair 15 mm bore Stop valves/angle valve, fancy type chromium plated cast copper alloy, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
Supply only in repairs 15 mm dia pillar taps fancy type cromium plated with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe complete all as specified and as directed.
Supply only in repair 15 mm Brass CP Wall Mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
Supply only in repair 32mm waste fittings, brass, chromium plated for wash hand basins,sinks etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed complete all as specified and directed.
Supply only in repair 50mm waste fittings, brass, chromium plated for wash hand basins,sinks etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed complete all as specified and directed.
Supply only in repair Grating doom 125mm dia of stainless steel with hole/without hole complete all as specified and directed.
Supply only in repair 15mm PTMT Bib tap standard of any colour screwed, for iron pipe and fixed complete all as specified and directed. (Make: Prayag/Shakti)
Supply only in repair 15mm Ball valves, high pressures of PTMT, with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe, Minimum wt (15mm -142gms) (Make: Prayag/Shakti) complete all as specified and directed.
All as per item No. 26 here- in- before but size 20mm dia and Minimum wt (for 20mm -210gms) (Make: Prayag/Shakti)
Supply only Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed by Engineer-in-Charge
Taking up or down steel tubing and connections including cleaning for refixing of 15 mm bore of pipe complete all as specified and as directed.
Taking up or down steel tubing and connections including cleaning for refixing of 20 mm bore of pipe complete all as specified and as directed.
s & F 15 mm bore GI pipe conceled medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed.
S & F 20 mm bore GI pipe conceled medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed.
Supply only GI nipple, and socket 15mm bore size complete all as specified and directed.
Supply only GI nipple, and socket 20mm bore size complete all as specified and directed.
Supply only GI Elbow, and Tee 15mm bore size complete all as specified and directed.
Supply only GI Elbow, and Tee 20mm bore size complete all as specified and directed.
Supply only Socket reducer, and Tank connection 20mm bore size complete all as specified and directed.
Supply only PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
Supply only PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
Disconnecting existing tanks, exc any size setting aside (or lowering if required), cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing in position.
S&F 500 ltr capacity rotational mounded polythylene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position including disconnecting unserviceable PVC/Cement water storage tank of 500 Ltr capacity complete all as specified and directed.
S&F 1000 ltr capacity rotational mounded polythylene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position including disconnecting unserviceable PVC/Cement water storage tank of 1000 Ltr capacity complete all as specified and directed.
S& F in repairs Brass chromium plated shower rose 125mm size with swivel joint, including fixing to steel pipe or union 15mm bore.
Supply only 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including flush pipe and brackets complete all as specified and directed. Specification of flushing cistern shall be as per IS 7231-1994.
Supply only' flushing cistern kit' for complete set to fitted inside as per reqd for cistern functional complete all as specified and directed.
S & F in repairs Vitreous China wash basin white, flat back, size 550 X 400mm, including cutting for and pinning in ends of brackets or erecting stand, with and including 32mm waste fitting brass, chromium plated with long screwed shank and fly-nut, flange end bedded in red lead cement, brass chromium plated bottle trap with inlet and outlet screwed for pipe or connections 32mm bore, including necessary packing, union and cap and fixed in repairs. Note:wash basin shall conform to IS 2556(part-4)-2004.
M&L for Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with and including 5 litres PVC automatic flushing cistern, including brackets, flush pipe, CP urinal spreader, grating union , union and cap and discharge pipe; fixed in repairs.
M&L for PVC (SWR) floor trap(75 mm dia), plain with grating including jointing with solvent cement to mitigate the site requirement to the entire satisfaction of engr-in-charge.
Supply only 20 mm dia gun - metal globe or gate valves with iron wheel head ,screwed both ends for iron pipe and fixed
Supply only soap dish, fixed to plugs with chromium plated brass screws etc complete all as specified and as directed.
supply only 32 to 40mm dia PVC waste pipe for wash basin and kitchen sink complete all as specified and directed.
Demolition of brick or stone/boulder masnory, built in cement mortar.
M & L for brickworks with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6
Taking down cement plaster on brick walls or concrete surface including raking out joints hacking for key and scrubbing down with water etc. complete all as specified & directed by Engineer-in-Charge.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in CM 1:6 finished even & smooth without using extra cement complete all as specified & directed by Engineer-in-Charge.
M&L for 5mm thick rendering in cement mortar in 1:3 to concrete surfaces as in ceiling in patches, finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-Charge.
M&L for rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4 finished even & smooth without using extra cement complete all as specified & directed by Engineer-in-Charge.
M&L two coats of white wash to new plastered surfaces on ceiling including preparation of surfaces complete all as specified & directed by Engineer-in-Charge.
M&L for two coats of cement base paint on new plastered surfaces of walls including prepration of surfaces and priming with alkali resistant priming paint complete all as specified & directed by Engineer-in-Charge.
M&L for two coats of oil bound distemper on new plastered surfaces of walls including 3mm thick wall putty on plastered wall surface incl prepration of surfaces and priming with alkali resistant priming paint complete all as specified & directed by Engineer-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
M & L non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete.
M&L full body Vitrified Ceramic tiles of light colour shade 8 to 10 mm thick (square/rectangular) polished, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6, complete all as specified and directed.
M&L full body Vitrified Ceramic tiles of light colour shade 8 to 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, as in skirting to match the vitrified ceramic couloured light shade floor tiles etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10 mm thick backing or rendering coat of plaster in cement mortar 1:4, complete all as specified and directed.
M&L Glazed ceramic coloured tiles of size 450 mm x 300 mm and 7 mm thick of approved colour as in verticle surfaces such as skirting, dado and risers to steps etc., set and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 10mm thick backing coat in cement mrotar1:4 including triangular filleting in cement mortar 1:4 on top of skirting/dado etc complete all as specified and directed.
Taking down chowkhats or with shutter (without taking off shutter from the frames) & removing from site n exc. 1.5 Sqm each complete all as specified and as directed
Taking down chowkhats or with shutter (without taking off shutter from the frames) & removing from site exc. 1.5 Sqm but n. exc. 4 Sqm each.
Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed
S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm
S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm
M&L for PCC 1:2:4 type B1 in door frame filling all as specified and directed.
Supply & Fixing PVC door frame (50x47) mm made out of plain colour5 mm thich PVC Sheet reinforced with MS Square Tube, supplying & fixing in opening as per specification & drawing. The door frame shall be tied to wall using 75/100mm long screw as directed
Supply and fixing Factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.
S&F factory made 35 mm thick plain framed paneled shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with Commercial veneered on both faces the size of rail and style as per IS-1003 ( Pt-I) kiln seasoned and Chemically pressed of 2nd class hard wood.
S & F Glazed skeleton shutter 35mm thk IInd class HW open rebated and prepared to receive glass, gauze etc (without shash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauze etc ; size of members of shutters as specified in SSR Pt-I, section 8 clause 8.24 (a)
S & F galvanised mild steel wore cloth, 0.63mm nominal dia of wire and avg width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples
Taking down steel window / ventilator of any size
S & F three track sliding window incl frame with two shutters with 4mm thk tinted glass and one shutter using stainless steel wire cloth 0.36mm nominal dia and 1.18mm width aperture for mosquito proofing with good quality bearing handle lock rubber beading and glazing clips etc; fabricated using following aluminium anodised sections conforming to catalogue of JINDAL or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & Vertical - 20621 (c) Handle (side) - 19352 (d) shutter inter lock - 20724 (e) Shutter top and Bottom - 20844 (f) Glazing clips - 19352 Note : Cost of tinted glass & wire cloth shall be included in the quoted rate of the item.
S&F aluminium powder coated DECOGRILLE 7.5mm width and 6mm thick of design DG-102 having wt 3.131 kg/sqm fixed to and including powder coated aluminium U type frame with CP brass/Stainless steel screws @ 200c/c, including cutting the grill to proper opening size for fixing & operation of handles and fixing & operation of handles and fixing powder coated aluminium section around the opening all as per requirement and direction of Engr-in-charge.
S&F in repair mild steel butt hinges of 100 mm size medium weight cold rolled by welding to existing frame complete all as specified and directed
S&F 250 mm Aluminum alloy, anodised , sliding door bolt with hasp and staple (BOLT TYPE) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed.
Supply only 250 mm Aluminum alloy, anodised , sliding door bolt with hasp and staple (BOLT TYPE) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed.
S&F 150mm long Aluminium anodized, barrel tower bolt of extruded section.
S&F 150mm long Aluminium handles cast type anodised
Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid and bedded and jointed in cement mortar complete all as specified and as directed.
M&L for Granite stone slab 18 to 20 mm thickpolished as in steps, jambs, pillars, window cills, cooking platforms and like including scrteed 15mm screed bed in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with colour, shade and moulding of edges or cutting grooves in steps complete all as specified and directed by Engr-in-charge.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations
Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc. from existing water tanks of capacity upto 500 litres of any type and in any position and writing the date of cleaning complete all as specified and directed.
Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc. from existing water tanks of capacity exc. 500 litres and not exc. 1000 litres of any type and in any position and writing the date of cleaning complete all as specified and directed.
Extra over rendering for work in isolated width such as in bands, sunk pannels, cornices, skirting sides of slabs, parapet sides and top drip moulds etc and similar work not exc 15 cm width or girth complete all as specified and directed.
Supply only Liquid water proofing compound .
M & L for taking out old water proofing treatment to RCC roof slab as specified below and as directed by Engr-in-Charge. (a) The Roof surface shall be thoroughly wire brushed washed dried up & cleaned to remove all foreign materials and dust to receive primer. (b) On the dried roof surface, apply one coat of bituminious primer @100gm/Sqm as per manufactueres instruction. (c) On this primed surface the approved APP modified bituminous membrane with non woven polyester mat asreinforcement weighing not less than 3.5 Kg/Sqm laid by torch applicatioon metho and top surface shall be applied with bituminous aluminium paint. (d) The overlap while torching shall be 75mm on longitudinal direction & 100mm on transverse direction. Note : Obtain material though out to low lying area.
Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.
M&L rolled sections as in main and cross beams, hip rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed witjh angle cleats or other connecting plates Fe 410 W (gde E 250 ) quality A including a shop coat of zink chromate primer complete all as specified and as directed.
Dismantling plain or corrugated steel sheeting any gauge, any thickness including Nainital or similar pattern roof covering , in wall clading and velley gutters complete all as specified and directed.
S & F 0.50mm thick pre painted/coloured galvalum aluminium zinc coating GI based corrugated steel sheet of any colour in roofing having tensile strength 550 Mpa fixed with self tapping screws all as specifeed.
All as per item No. 96 above but plain sheet fix in valley gutter / ridge complete all as specified and as directed.
M&L for MS work as in wind tie or any other work incl cutting , drilling holes etc.
Dismantling of wall and ceiling boards including frame work (fibre pulp, insulation, etc.) or insulation board/slabs/blankets any thickness including cover fillets
M & L for false ceiling with 10mm thk of panel size 600 x 900 mm plaster of paris sheets fixed with machine screws on GI Channel 18gauge thk, grid work main joists placed at 750mm centres, secondary joists placed at 450mm centres, GI angle suspenders from roof and treating the plaster of paris sheets with this layer of POP with Gypsum binder, sanding the surfaces till smooth surface is obtained incl preparation of surface and applying two coats of OBD over a coat of primer all as specified and as directed. Make : Gyproc or Equivalant
M & L for marble work green marble 18 to 20mm thk (table rubbed and polished in steps, jambs pillars, window cills cooking platform and like in CM 1:4 incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as specified
Comprehensive Maintenance, including day to day maintenance of OTM/Adm Block area and Depot area of ODTD, for functioning the electric supply and repair/maintanence of internal fiting/fixture complet all as directed . The quoted rates shall be deemed to be inclusive of the following: (a) To attend day to day complain for repair/replacement of internal wiring, the internal fitting,fixture including controling system. (b) Repair/ Replacement of unserviceable internal light fittings of any type. (c ) Repair/ Replacement of unserviceable celling fan,exhust fan,wall mounted fan of any type. (d ) Repair/ Replacement of unserviceable MCB,MCCB,DB of any type. (e) Repair/ Replacement of unserviceable Eectric meter of any type. (f) Repair/ Replacement of unserviceable earthing system. ( g) Immediate repair of non functioning of no light complain. (h) To maintain the electric circuit as per IE Rules / Standard Engineering Practice . (i) Providing the skil electrician and helper for repair/maintanence internal electric system. (j) Providing tools and safty equiptment for repair/maintanence of electric wiring. Note: (i) For no light complain to be rectify immediately as and when required. (ii) The unserviceable /repair fitting,fixture within same day or next day maximum. (iii) The quoted rate icluding the trades men,helper all equiptment/tools,ladder. (iv)The replacement items will be easured and paid in respective Sch "A" items. (v) Insurence for tradesmen/helper also included the quated rate. (vi) The service to be provided all arround the day including sunday and holiday. (vii) Replace the items in place of unserviceable items will be issued by the department as free for fixing) (viii) The Unserviceable items deposited to MES store yard
Supply the folowing items for day to day maintanence.
Supply modular switch 1 way 6A,1 module, 220 V. Make :Belno, Legrand,crabtree.
Supply switch piano flush button single pole one way 6 Amps, 220 V. Make : Belno,Legrand,Havells
Supply modular socket 6A-2/3 pin combined 2 moduleas flush type 220 V Make : Benlo,Legrand,crabtree.
Supply socket outlet 2 in 1,3 pin,5A flush type 220 V . Make : Benlo,Legrand,crabtree.
Supply modular switch 2 way 6A,1 module, 220 V. Make : Benlo,Legrand,crabtree.
Supply modular Bell Push 6A,1 modulee single pole 220 V. Make:Benlo,Legrand,crabtree.
Supply Bell Push flash type,5A,single pole 220 V. Make:Benlo,Legrand,crabtree.
Supply switch piano flush button single pole Two way 5 Amps, 250 V.Make:Benlo,Legrand,crabtree.
Supply modular multi socket 6A/16A-2/3 pin combined 2 modules flush type 220 V .Make :Benlo,Legrand,crabtree.
Supply socket 6A/16A-2/3 pin combined flush type 220 V .Make : Benlo,Legrand,crabtree
Supply switch 15Ampa flush type 220 V .Make : Benlo,Legrand,crabtree.
Supply for repairing Ceiling rose, surface bakelite, 65mm x 50mm two to three terminals.Make :Benlo,Legrand,crabtree.
Supply switch Neion indicator flush type 220 V .Make : Benlo,Legrand,crabtree.
Supply modular Switch ,16/20 amp fush type 220 V .Make :Benlo,Legrand,crabtree.
Supply Switch socket combination 2 in 1,3 pin,6 and 16 Amp flush type universal type 220 V . Make : Benlo,Legrand,crabtree.
Supply modular fan regulator stepped type Electronics regulator flush type on the existing 120 watts,220 volt, 2 modules and connecting complete all as specified and directed .Make : Benlo,Legrand,crabtree.
Supply Electronics dimmer piono switch type 400 watts,220 volt flush type. all as specified and directed .Make : Benlo,Legrand,crabtree.
Supply modular white cover plate with frame suitable for 1 module. Make:Benlo,Legrand,
Supply modular white cover plate with frame suitable for 3 module. Make:Benlo,Legrand,
Supply modular white cover plate with frame suitable for 4 module.Make:Benlo,Legrand,
Supply modular white cover plate with frame suitable for 6 module.Make:Benlo,Legrand,
Supply modular white cover plate with frame suitable for 8 module.Make:Benlo,Legrand,crabtree.
Supply modular Metal flush box suitable for 1/2 module.:Make:Benlo,Legrand,crabtree.
Supply modular Metal flush box suitable for 3 module.Make:Benlo,Legrand,crabtree.
Supply modular Metal flush box suitable for 4 module. Make:Benlo,Legrand,crabtree.
Supply modular Metal flush box suitable for 6 module. Make:Benlo,Legrand,crabtree.
Supply modular Metal flush box suitable for 8 module Make:Benlo,Legrand,crabtree.
Supply PVC rectangular block for mounting,switches,sockets, fan regulator etc with 3mm thick plastick laminated sheet cover of size 100 mmx 100mm and 50mm deep.
Supply PVC rectangular block for mounting,switches,sockets ,fan regulator etc with 3mm thick plastick laminated sheetbcover of size 175 mmx 100 mm and 50mm deep.
Supply PVC rectangular block for mounting,switches,sockets, fan regulator etc with 3mm thick plastick laminated sheetbcover of size 200 mmx 150mm and 50mm deep.
Supply PVC rectangular block for mounting,switches,sockets, fan regulator etc with 3mm thick plastick laminated sheetbcover of size 250 mmx 200mm and 50mm deep.
Supply buzzer,Ding Dong AC 230 volts single pole.Make.:Benlo,Legrand,crabtree.
Supply bell multi musis AC 230 volts single pole.Make.:Benlo,Legrand,crabtree.
Supply lamp holder,PVC/Polycar bonate type with back plate suitable for batten fitting.Make-:Benlo,Legrand,crabtree.
Supply Distribution board, SP&N vertical ,Prewired ,Netural links,blanking plates ,single door 8 way, with provision for MCB SP&N as incommer and SP/DB MCB as outgoing and electrically connecting up complete all as specified and directed.,Make : Bentec/Havells / Legrand
Supply Distribution board, SP&N vertical ,Prewired ,Netural links,blanking plates ,single door 6 way, with provision for MCB SP&N as incommer and SP/DB MCB as outgoing and electrically connecting up complete all as specified and directed. Make : Bentec/Havells / Legrand
Supply MCB SP 6 to 32 Amps 240 volts 50 HZ having 10 KA complete.Make : Bentec/Havells / Legrand
Supply MCB SPN 40 Amps 240 volts 50 HZ having '10 KA complete.Make : Bentec/Havells / L&T/Legrand
Supply MCB DP 40 Amps 240 volts 50 HZ having 10 KA complete.Make : Bentec/Havells / L&T/Legrand
Supply MCB TPN 40 Amps 240 volts 50 HZ having 10 KA complete.Make : Bentec/Havells / Legrand
Supply MCCB ,TPN,415 Volt AC 50HZ 100 Amps , adjustable braking capacity 10KA complete all as directed.Make : Bentec/Havells / Legrand
Supply only condenser 2.5 Mfd/3.5 Mfd capacity Make Make :Havells,HPL, Asian.
Supply only Capacitor 4Mfd suitable for exhaust fan of sweep 300mm/450mm complete all as directed. Make :Havells,HPL, Asian.
Supply Inverter LED batten 20 watt with square profile and polycarbonate channel. Lithium Ion battery with charging time 8hours-10 hours and back up time upto 4 hours..Make:-Havells,,Philips ,wipro
Fixing of decorative surface / wall mounted/ LED batten/wall/celling light of any type .Note : Material will be issued under Schedule"B".
Fixing of LED Lamp any type any capacity .Note : Material will be issued under Schedule"B".
Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, sockets, light fittings, MCB DBs,outlet boxes etc.removing material for taking credit and making good disturbed surfaces with match colour of walls, floors, ceilings etc all as specified.
M&L for casing capping point wiring suitable for One Light/Bell/Fan point controlled by one switch complete with 1.5 Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 V grade confirming to IS 694 drwan through PVC casing capping of size heavy grade ISI marked including necessary casing capping with accessories, heavy duty PVC terminal including 1.5 mm PVC insulated FRLS copper conductor as in continious earth wire.
All as per item No-151 here in before but one Light controlled by two-way switch .
All as per item No-151 here in before but one 3 pin 5 Amps socket outlet on independent board
All as per item No-151 here in before but one 3 pin 5 Amps socket outlet on same board
All as per item No-151 here in before but above but with 4 Sqmm wire for 15 Amp socket outlet on independent board.
Taking down unserviceable sub main wiring of any size complete and making good disturbed surface with match colour of walls/floors etc complete as specified.
M & L submain wiring with two single core through PVC insulated unsheathed stranded copper conductor 2.5 sqmm (nominal area) drawing through PVC capping casing and 2.5 sqmm stranded copper conductor cable PVC insulated and unsheathed (green colour) 1100 volts grade for earth continuity conductor and connecting with main earth dolly(Note : Cutting chases for counduit and sinking"s for boxes and makeing good to walls ,floors etc for sub main wiring will be measured & paid separately in respective items).
All as per item No-157 herein before but of size 2X 4 sq mm and 1X4 sqmm
All as per item No-157 herein before but of size 2X6 sq mm and 1X6 sqmm
Taking down the ceilling fan/wall mounted fan,Exhust fan from ceilling,wall,cleaning the dust,drit ,greashing,serviceing ,repairing and refixing the original positin all as directed. Note:- Necessary spare for repairing will be issuedby the department as free for fixing.
Taking down unserviceable Ventil Air DB Green Fans and deposited to MES store yard Supply and fixing Ventil Air DB Green made with and accessories,230 volt,50 Hz,rpm copper winding of sweep 230 mm including necessary arrangement for fixing on plywood in proper size all as directed.Make-Havells,Crompton
Taking down unserviceable Ventil Air DB Green Fans and deposited to MES store yard Supply and fixing Ventil Air DB Green made with and accessories,230 volt,50 Hz,rpm copper winding of sweep 300 mm including necessary arrangement for fixing on plywood in proper size all as directed.Make-Havells,Crompton
Taking down unserviceable Ventilating Fans and deposited to MES store yard Supply and fixing Ventil Air - DX White made with sturdy engineering plastic complet and accessories,230 volt,50 Hz,rpm copper winding of sweep 200 mm. including necessary arrangement for fixing on plywood in proper size all as directed.Make-Havells,Crompton
Taking down unserviceable Ventilating Fans and deposited to MES store yard Supply and fixing Ventil Air - DX White made with sturdy engineering plastic complet and accessories,230 volt,50 Hz,rpm copper winding of sweep 200 mm. including necessary arrangement for fixing on plywood in proper size all as directed.Make-Havells,Crompton
Taking down unserviceable ceiling fan and deposited to MES store yard and Supply nd fixing ceilling fan complete with blades, down rods,electronic regulator and accessories,230 volt,1200 mm sweep, min air delivery 210 CFM with service value BEE star rated.Make-Havells,Bajaj
M&L for earthing complete with galvanized steel pipe electrode,40mmbore,medium grade,2.5 Mtrers length,buried directly and preferably vertically in ground with top edge not less than 1.25 meters below ground leavle cinnected with earthing lead of 4mm dia galvanised iron or steel wire all as shwn in Plate no-2 to the earthing test point all as specified and indicated including testing on completion.
S&F in repair Smart Integrated Solar All In One 20 watt with 40Wp Rating, MPPT Charge Controller, Tiltable LED panel, Adjustable AIO mounting angle, Mono Crystalline Solar Panel, PIR motion Sensor, easy to install. MAKE :-Helonix CAT PART No HLSSLIN09A01020621-20W-WOP-CWL or eqvalent Havells,Wipro
Supply and fixing of Environmental friendly, energy saving long life corrosion resistant, vertical surface mounting pressure die-cast aluminium housing (light engine) well glass luminaires with high power LED as light source LED 40 watt.6500 K .Make:-Benlo,Havells,Philips.
Supply and fixing Slim recess mounting luminaire with octane Plus 2x2 Panel LED 36 watt edge-lit luminaire suitable for armstrong/grid ceiling complete for low ceiling applications complet all as directed.Havels all as directed.Make:-Benlo,Havells,Bajaj,Philips
Ridhi Constructions (BID ID -3074838)
KARPE AND SONS CONSTRUCTION (BID ID -3073622)
Shri Sai Electricals (BID ID -3066588)
PREETI ENTERPRISES (BID ID -3079798)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .