PROVISION OF COVERED SHED ALONG WITH ESSENTIAL LIVING COMMODITIES ON TOP OF DSC BUILDING FOR AUDIO VISUAL ROOM TRAINING ROOM AND DEMONSTRATION ROOM AT CGAE NEDUMBASSERY, KOCHI

Amount

SCHEDULE 'A' PART-I(B/R WORKS)

Material and Labour for drilling holes of suitable dia in to the RCC coloumn/beam of security wall for inserting 12mm dia reinforcement bars and fixing the bars in to holes using Fosroc Lockfix two-component polyester resin anchoring grout chemical for firmly fixing complete complete all as per manufactures instructions and as directed. NOTE: Reinforcement bar shall be measured and paid separately.

Dismantling of reinforced cement concrete in dummy columns of any size and in any description at any position not exceeing in 0.5 cum and flushing the RCC surface with existing floor level including embedding the reinforcement to floor complete all as specified and as directed.

Material and Labour for reinforced cement concrete M30 design mix using 20mm graded stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and as directed

Material and labour for reinforced cement concrete M-30 design mix using 20 mm graded stone aggregate as in foundations including raft, footings , plinth beam, bases for columns, basement slabs and mass concrete and similar work complete all as specified and as directed.

Material and labour for RCC M-30 design mix using 20 mm graded stone aggregate as in slabs supported on wall, beams and columns, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Material and labour for TMT bars(CRS/HCR), 10mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed.

Material and Labour for TMT(CRS/HCR) bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wires (annealed) not less than 0.9 mm dia or secured with clips complete all as specified and as directed.

Use and waste of formwork to sides of foundation footing, for rough finished surfaces, flat complete all as specified and as directed.

Use and waste for form work to sides and soffits of beams, lintels etc, fair finished flat surfaces of concrete all as specified and as directed.

Use and waste of formwork to sides and soffits of chajja, troughs and similar works finished fair surfaces, flat complete all as specified and as directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings, and similar work, not exceeding 200 mm thick etc, fair finshed surfaces of concrete (Horizontal or sloping) complete all as specified and as directed.

Material and labour for RCC M-30 design mix using 20 mm graded stone aggregate as in chajja, troughs and similar work complete all as specified and as directed.

Supply and fix rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats conforming to Fe-410W(Gde E-250) quality A complete all as specified and as directed.

Supply and fixing Pre-painted galvalume roofing sheet of 0.50mm thickness (Total coated Metal thickness) mangalore tile pattern profile having tensile strength of 550 MPa, coated with hot dip metallic zinc aluminium alloy coating @ 150 gms/sqm, total on both sides of ZN (45%) & AL (55%) of approved colour fixed with GI self tapping fastening bolt/screw as in roof covering/cladding etc as per manufacturers instructions complete all as specified and as directed.

Supply and fix for Pre-painted galvalume plain sheet 0.50mm thick having tensile strength of 550 MPa, coated with hot dip metallic zinc aluminium alloy coating @ 150 gms/sqm, total on both sides of ZN (45%) & AL (55%) of approved colour fixed with GI self tapping fastening bolt/screw as in roof covering/cladding/ridge etc as per manufacturers instructions complete all as specified and as directed.

Supply and fix Mild steel flat iron section as in wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply and fix for mild plate(plain or chequerred), channel, square cut or notched(ordinary or counter sunk) forming holes with out any attachment conforming to Fe 410-W quality A(Gde-E-250) complete all as specified and directed.

Supply and fix mild steel bolts purpose made with hexagonal or square head one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exceeding 15 cm and not exceeding 30 cm complete all as specified and as directed.

Material and labour for preparation of new or previously untreated steel surface over 10 cm width or girth and applying two coats of synthentic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for Precast cement concrete solid block masonry using soild PCC block grade C4, exceeding 10 cm in width and built in cement mortar 1:6 complete all as per specified and as directed.

Material and labour for rendering 15 mm on fair faces of brick or concrete surfaces in CM 1:6, finished even and fair without using extra cement complete all as specified and directed.

Material and labour for rendering 15 mm on fair faces of brick or concrete surfaces in CM 1:4, finished even and fair without using extra cement complete all as specified and directed.

Material and Labour for rendering 5 mm thick in cement mortar 1: 3 on fair faces of concrete surfaces of ceiling finished even and smooth with out using extra cement, complete all as specified.

Material and labour for preparation of newly plastered surfaces and applying two coats of acrylic distemper over a coat of alkali resistant primer complete all as specified and as directed

Material and Labour for preparation of plastered surfaces and applying two coats of weather proof exterior emulsion paint over a coat of primer complete all as specified and as directed. Make: Apex Ultima Protek of Asian/Exel of Nerolac/Weather Coat of Berger

Material and Labour for preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.

Material and Labour for 15 to 18mm thick mirror polished green marble stone slab as in window cills, vertical jambs and soffits etc, exposed edges shall be chamferred and polished to receive aluminium joinery over 10mm thick plaster in CM (1:4) jointing and pointing in neat cement slurry mixed with pigment to match complete all as approved and directed by Engr-in-Charge. Note : (i) Not more than 2 pieces in cill/jambs shall be used and single peice without any joint shall be provided in post/ columns and vertival surfaces. (ii) Stone slab in cills shall be provided in stepped pattern to avoid splashing of water inside.

Supply and fix aluminium powder coated frame for doors,windows, ventilators with one or more rebates with joint clip and using rubber beading etc complete all as specified and directed. Note : Glass panel/particle board panel filling shall be measured and paid separately.

Supply and fix Aluminium Powder coated sliding window shutter using aluminium section weighing 0.55kg/m, 20mm thick using standard vertical handle section, interlocking section, top and bottom rails, U channels for all -around for gauge shutters. All sections are of medium weight series of approved make in three track sliding window in which two shutters of with and including of 4mm thick Modi guard or equivalent float glass and one shutter fixed with inclusive of stainless steel wire mesh of size 0.30mm nominal dia and average with of aperture 1.40mm, including necessary jointing cleats, glazing clips , good quality bearing rollers, Neoprene rubber Gasket and rubber beading of any type, screws , aluminium fitting such as Gasket, handle (01 Nos on each shutter), interlocking arrangements complete all as specified and asdirected by Engr in Charge. Note: The quoted rate shall be inclusive of 4mm thick float glass and Stainless steel wire cloth.

Supply and fix Aluminium Powder coated louvered ventilator using rectangular tube of size 63.5x25x1.5mm with 3.00mm thick pin headed glass and adjustable Louvers Ventilator and fixed with stainless steel mosquito jalli of 0.30mm Nominal dia and 1.40mm aperture fixed to frame etc complete all as specified and directed.

Supply and fix Rotational moulded Polyetheylene Water Storage Tank 1000 Ltr capacity Triple Layer (Cylinderical verticle with closed top) including 15mm dia GI Medium Grade 200mm long overflow and wash out pipe each with all required fittings, Checknut, Stopper etc complete hoisted and fixed in position, including all incoming and outgoing connection of GI pipe complete and including 20mm PTMT Ball valves high pressure wiith epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete for 15mm dia pipe (Minimum weight 15mm- 142 gms/each) fixed on roof top complete all as specified and directed.

Supply and fix PVC flushing cistern low level 10 litre capacity with inlet ball valve, float valve and handle/push including brackets and PVC outlet pipe of suitable lenghth connecting to WC etc including all fittings, and dismantling old flushing cistern any type complete all as specified.

Supply and fix PVC connections 45cm long fitted with PTMT nuts and washer on both ends, fixed to 15mm bore iron pipes complete complete all as specified.

Supply and fix Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing all as specified and directed.

Supply and fix Factory made solid PVC Moulded door shutter of any colour and pattern as approved , 28 to 30mm thick (style) with particle board core and with 2,4 or raised panel design with 2mm thick Moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in the frame at site as per specification in SSR Part-I complete complete all as specified.

Supply and fix Galvanized mild steel tubes, ‘medium grade’ with all fitting and fixed complete to walls / laid in floors and in ceilings of 15mm dia including short length pipe ,complete all as specified and directed.

Material and labour for applying oil based bitumen primer conforming to IS 3384-1986 at 0.20 kg/Sqm on prepared surface and applying of one coat of blown grade hot bitumen 85/25 conforming to IS 702 @ 1.20 kg / sqm and applying roof treatment with APP modified waterproofing membrane weighing not less than 3kg/sqm, reinforced with non woven polyster matt weighing not less than 160 gm/sqm having softening point not less than 140 degree centigrade, longitudinal tensile strength not less than 650N/Sqm cm, tearing strength of 180N(Minimum), applied by torch-on application including minimum 10 cm over lap and 15 cm end lap and applying of one coat of blown grade hot bitumen 85/25 conforming to IS 702 @ 1.20 kg / sqm over the membrane and then applying solar reflective bituminous aluminium paint for thermal insulation @ 0.10 kg/sqm complete all as specified and directed. NOTE:All necessary safety measures shall be ensured by the contractor during execution of work at site and quoted rate shall be deemed to be inclusive of the same.

Supply and fix Galvanized mild steel tubes, ‘medium grade’ with all fitting and fixed complete to walls / laid in floors and in ceilings of 20mm dia including short length pipe ,complete all as specified and directed.

Supply and fix Chromium plated fancy type stop cock , cast copper alloy with capstan handle, screwed down, high pressure screwed both ends for 15mm bore iron pipe or for unions complete all as specified and as directed.

Supply and fix Bib taps 15mm chromium plated fancy type cast copper alloy with crutch or butter fly handle, screwed down for iron pipe and fixed complete all as specified.

Supply and fix butt hinges, cast brass with mild steel hinge pin bright polished and fixed type B-I2 of size 125mm complete all as specified and as directed.

Supply and fix brass, sliding door bolt of size 300mm with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts complete all as specified and as directed.

Supply and fix brass door handles of extruded and fabricated type polished of size 150 mm fixed complete all as specified and as directed.

Supply and fix jet spray in EWC 15mm dia with PVC flexible pipe of 1.5M length complete all as specified and as directed. Make: Sona or Eqvivalent complete all as specified and as directed.

Supply and fix Vitreous china bowl urinal flat back size 465 x 355 x 265 mm ,white ,with grating and union for discharge pipe including CP tortise shape urinal spreader and PVC waste pipe complete all as specified and as directed.

Material and Labour for rendering 15 mm thick in two layers (10mm + 5mm) in prescribed interval on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished the surface even and smooth with using extra cement and applying 10mm Plaster of Paris(POP) by punning over the rendered surface as directed suitable for display board including decorative POP side cornices of cross sectional area not exceeding 10 Sqcm finished and preparation of surfaces and applying two coats of plastic emulsion paint over a coat of primer matching with the colour complete as required and as specified and directed by the Engr-in-Charge.

Cutting into existing manholes in brick walls in cement mortar for inserting/connecting new drain pipes exceeding one bricks but not exceeding two bricks and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required 150mm dia bore pipe etc. complete all as specified and as directed.

Material and Labour for glazed ceramic coloured Digital wall tiles (including Digital Highlighters etc) in vertical surfaces of size 450x300x7 to 8 mm thick including and with matching highlighter set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including rendering 10 mm thick in CM 1:3 as backing of wall tiles complete all as specified and as directed.

Material and Labour for vitrified tiles 10mm thick (square/rectangular) light coloured, area of each tile exceeding 0. 42 sqm and not exceeding 1.0 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed of 15mm thick in CM 1:4 complete all as specified and as directed.

Material and Labour for non-skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) joint free area of each tile not exceeding 0.18 sqm in floors etc, set and jointed in cement mortar and pointed in white of coloured cement to match over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

Material and labour for 75mm thick plain cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of floors including necessary form work all as specified and as directed.

Supply and fix 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete as specified and directed.

Supply and fix 30 mm thick second class hard wood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt I Section 8, clause 8.24 (a) complete as specified and directed.

Supply and fix pressed steel frame for doors with one or more rebated including necessary fixing lungs, hinges, lock, strike plates etc powder coated, size of frame 125 x60 mm made out of 1.25 mm thick MS sheet incuding back filling in PCC 1:3:6 Type C0 using 12.5mm graded stone aggregate complete as specified and directed.

Supply and fix 0.9mm thick Decorative lamination type 1, of surface finish, any colour, shade and (combination of two or more shade for making pattern shall be as directed by Engr in Charge during execution of work) and pattern as approved, fixed with approved adhesive as per manufacturer's instructions in door, Cub boards, kitchen cabinets etc. complete all as specified and directed.

Material and Labour applying two coats synthetic enamel paint over one coat of pink primer on wooden surface any description over 10 cm in width or girth not otherwise described including preparation of surface etc., complete.

Supply and fix mild steel 25x3mm MS Flat for hold fast, cleat etc. for door frame etc. conforming to Fe 290, Gde E-165 complete all as specified and as directed.

Material and labour for Plain cement concrete 1:3:6, type C1, using 20mm graded stone aggregate as in bed block for hold fast including necessary form work all as specified and as directed.

Supply and fix angle valve CP cast copper alloy, with crutch or butterfly handle, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed complete all as specified and as directed.

Supply and Fix vitreous china wash down water closet Pedastal pattern white (excluding flushing cistern ) including trap set, seat cover black or white closed pattern with flat bottom and conection to trap, flushing pipe, etc. with 'P' or 'S' trap, making good the floor to match with existing floor complete all as specified and as directed.

Demolition of cement concrete in ground floors and paving ( reinforced) n exc. 15 cm. thicknesses, below or above ground level, complete all as specified.

Supply and fix 15 mm bore pillar taps cast copper alloy with capstan heads fancy type chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed.

Supply and fix 15 mm bore two way Bib tap 15mm bore cast copper alloy with capstan heads fancy type chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed.

Supply and fix Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe 05 15mm bore complete all as specified and as directed.

Cutting chases, pinning in. making good to facings where required and ointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth complete all as specified and as directed.

Supply and fix PVC (SWR) pipes 110mm single socketed , in any length with rubber ring joints ,fixed to walls complete all as specified and as directed.

Supply and fix PVC (SWR) pipes 75mm single socketed , in any length with rubber ring joints ,fixed to walls complete all as specified and as directed.

Supply and fix PVC (SWR) bends 110mm complete all as specified and as directed.

Supply and fix PVC (SWR) bends 75mm complete all as specified and as directed.

Supply and fix PVC (SWR) vent cowl 110mm complete all as specified and as directed.

Supply and fix PVC (SWR) vent cowl 75mm complete all as specified and as directed.

Supply and fix PVC (SWR) branch piece (single Y) equal or unequal 110mm complete all as specified and as directed.

Supply and fix stack clamps made out of 50mm x5mm MS flat iron and 16 mm dia round iron stays , including bolts and nuts and securung ends of stays to walls or roofs for 100mm pipe complete all as specified and as directed.

Supply and fix stack clamps made out of 50mm x5mm MS flat iron and 16 mm dia round iron stays , including bolts and nuts and securung ends of stays to walls or roofs for 75mm pipe complete all as specified and as directed.

Supply and fix Chromium plated steel grating 100mm dia complete all as specified and as directed.

Supply and fix Vitreous China Ware Wash hand basin white, flat back, size 560mmx410 mm size including cutting for and pinning ends of brackets or erecting stand including 32mm brass chromium plated waste fitting, a pair of cast iron bracket duly painted including cutting and pinning in ends making good disturbed surfaces in CM 1:3 complete all as specified and as directed.

Supply and fix PVC (SWR) floor trap , plain with grating including jointing with solvent cement 75mm bore complete all as specified and as directed.

Material and Labour for PCC 1:2;4 type B-1 using 20 mm graded stone aggregate as in pading concrete, finished fair and even etc complete all as specified and as directed.

Supply and fix anodised aluminium snap grid frame work for false ceiling with 605mm x 605mm size, consisting of main Tee of size 23.50mmx36.50mmx1.50mm, cross Tee of size 23.50mmx23.50mmx1.50mm and wall angle of size 36.00mmx25.00mmx1.50mm of approved make including all necessary cuttings, fixing of aluminium section firmly in position with and including steel hangers 6 mm dia G.I. wire (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 40 mm long in soffit of slab/walls complete all as specifed and as directed including provision of 12mm thick Moisture Resistant Gypsum board 600mmx600mm size, fixed in ceiling, flat or sloping and applying two coats of acrylic distemper over a coat of primer complete all as specified and directed. Note :- Rate quoted above shall be deemed to include for making holes, cutting chassis if any required and making good to existing walls in cement mortar 1: 3 to match with existing surface finish as directed at site.

SCHEDULE 'A' PART-II(E/M WORKS)

Material and Labour for point wiring complete using 1.5 Sqmm PVC insulated unsheathed copper conductor, stranded cable (FRLS) upto and including working voltage 1100volts grade, drawn through and including PVC casing and caping including all accessories ISI marked including press fit white PVC open switch/surface board high strength and crack resistance and unsheathed copper conductor stranded cable (FRLS) earth continuity wire connected to DBs/sunken boxes/fittings of size 1.5 Sqmm Cross sectional area and all other metal parts with earth dolly, complete all as specified and as directed for the following:-. (a ) one light point controlled by one switch 5 Amps

(b ) One 3 pin socket outlet 5 Amps on same board .

(c ) One 3 pin socket outlet 5 Amps on independent board .

Material and Labour for point wiring complete using 2.5 Sqmm PVC insulated unsheathed copper conductor, stranded cable (FRLS) upto and including working voltage 1100volts grade, drawn through and including PVC casing and caping including all accessories ISI marked including press fit white PVC open switch/surface board high strength and crack resistance and unsheathed copper conductor stranded cable (FRLS) earth continuity wire connected to DBs/sunken boxes/fittings of size 2.5 Sqmm Cross sectional area and all other metal parts with earth dolly for one power point 16 Amp controlled by oneway switch 16 Amps complete all as specified and as directed

Supply and fix energy efficient 5 star rated high speed BLDC ceiling fan with remote, 370RPM, 1200mm sweep, including motor-blade set, downrod, shackle, assembly kit, canopy , remote etc, Operating voltage 230 volt single phase complete all as specified and as directed. Make: Havells/Crompton Greaves/Usha.

Supply and fix LED flood light fitting 50W energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65/66, 10KV SPD, more than 100lm/watt flood light with high power LEDs as light source, suitable for highlighting architectural facade highmast and general purpose lighting complete all as specified and as directed. Make: Model no. SZCFLPH050 of Shakti or equivalent in Crompton Greaves/Philips.

Supply and fix Modular switch one way 6A, 1 Module complete all as specified and as directed.

Supply and Fix Modular switch socket combination 3 pin 16 Amp 230 volt complete all as specified and directed.

Supply and Fix Distribution board (DB) made out of sheet metal enclosure (CRCA sheet), dust and vermin proof, SPN 8 way with 200 Amps rated copper bus bar double door protection, neutral bar,earth bar, single pole and neutral 240 volts, MCBs used as incommer Double door, flush to wall complete all as specified and as directed. NOTE: MCB shall be measured and paid separately.

Supply and Fix Distribution board (DB) made out of sheet metal enclosure (CRCA sheet), dust and vermin proof, TPN 4 way with 200 Amps rated copper bus bar double door protection, neutral bar,earth bar, single pole and neutral 415 volts, MCBs used as incommer Double door, flush to wall complete all as specified and as directed. NOTE: MCB shall be measured and paid separately.

Supply only MCB single pole 240 volt C curve 10 KA, 6 to 32 Amps capacity IP 20 transparent lebel holder fully insulated safety shutters suitable for cable up to 35 Sqmm cross scetional area complete including suitable size copper lugs complete all as specified and directed.

Supply and Fixing MCB TPN 415 Volts, 50Hz, 3 phase of capacity 40 Amps, C curve 10 KA breaking capacity, fixed properly in DB and connecting/testing complete all as specified and as directed.

Supply and Fixing MCCB 4 pole 415 Volts, 50Hz, 3 phase of capacity 63 Amps, C curve 10 KA breaking capacity, fixed properly in DB and connecting/testing complete all as specified and as directed.

Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric cable, heavy duty, 1100 volt grade with stranded aluminium conductor cables of 4 core 25 Sqmm sizes fixed in wall/ roof or laying in trenches etc., complete all as specified and as directed. NOTE: Excavation, earth work shall be measured and paid for separately.

Supply and fix elctromachanical SPN (AC double pole) RCBO's, 240 volt, 50Hz with 10KA short circuit capacity for earth leakage protection, 40 Amps sensitivity 30 mA 240 V (As incomer) complete all as specified and as directed. Make : Cat No. DHBMACDP4030040 of Havells or equivalent in Indo Asian / Legrand.

Earthing complete with Galvanized steel earth plate electrode of size 600mmX600mm, 6.00 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below the normal ground level with top edge of the plate not less than 1.5m below normal GL and connected to galvanized iron strip of size 32 x 6 mm size by means of bolts, nuts, check nuts and washers of galvanized iron steel all as shown in Electrical Plate No.5 connecting to earthing test point, including necessary earth work in any type of soil, PCC earth chamber made in PCC 1:3:6 type C1 (using 20mm graded aggregate), common salt, charcoal, CI funnel, earth pit cover in RCC 1:2:4 type B1 (using 20mm graded aggregates), with 8mm CTD bars @ 100mm c/c in both ways, including necessary form work complete including necessry test on completion all as specified and as directed. ( LT panels-2 nos x 2=4 nos, Note : The unit rate shall also include for excavation, earth work in hard/dense soil PCC (1:3:6) type C1 , RCC cover slab, GI funnel with 15 mm dia watering pipe, wire mesh, 40mm dia light grade GI protection pipe for earth lead etc., complete.

Material and Labour for sub main wiring with single core 1100 V grade conforming to IS 694 PVC insulated unsheathed cables 2 run 6 Sq mm multi stranded copper conductor drawn through and including 20 mm dia non metallic PVC rigid conduit and conduit accessories fixed on walls/roof/floors/ceiling etc with an earth wire of one run 6 sqmm copper wire earth continuity conductor etc allas specified and directed. Note : Three runs of 6 sqmm cable and one run of PVC conduit shall be measured as one run.

Supply and fix sheet metal enclosure suitable for Fixing 63 Amps MCCB 4 pole 415 Volts, tripple pole & neutral complete all as specified and as directed.

Supply and fix iSS LED serene Recess with smart sensor light fittings 2' x 2' , 36 watts , recess mounted luminarie with frame 240 volts with inbuilt sensor based smart LED auto dimmable recess mounted serene 2' x 2' , made from CRCA sheet, white powder coated houising, opaque glare free diffsur for optimum light output , pre wired with all accessories complete all as specified and as directed. Make: Cat No. SZRSRMX036-iSS OF SHAKTI OR EQUIVALENT IN HAVELLS / CROMPTON GREAVES / PHILIPS.

Supply and Fix Modular switch socket combination 3 pin 6 Amp 230 volt complete all as specified and directed.

Supply and Fix Modular socket 6A 2/3 pin combined 2 module complete all as specified and as directed.

Supply and fix in repair LED tube light batten, 20W extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete as specified and directed by Engr-in-charge. Make: Cat No: CELS Cat No CLLC-20W or equivalent in Havells / Crompton greaves /Philips

Excavation in trenches n.exc 1.5 M wide and n. exc 1.5 M depth and getting out in soft/loose soil getting out complete all as specified and as directed.

Returning, filling in soil including spreading leveling, watering and well ramming in layers n.exc.25cm thick complete all as specified and as directed.

Removing excavated material / soil to a distance n.exc 50m away and depositing where as directed at a level n.exc 1.5m above the starting point, complete all as specified and as directed.

Supplying and laying 25mm outer dia CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Material and Labour for cutting existing 40/50mm bore tubing for alterations or additions and inserting CPVC Tee 50mmx50mmx40mm size in existing pipe line with necessary fittings complete all as specified.

Supply and fix Gun-metal, globe or gate valves,with iron wheelhead, screwedboth ends for pipe and fixed 25mm bore complete all as specified and as directed.

Supply and fix Gun-metal, globe or gate valves,with iron wheelhead, screwedboth ends for pipe and fixed 40mm bore complete all as specified and as directed.

Material and labour for providing dry screened river sand as in sand cushioning to under ground cable including punning down of sand by layer complete all as specified and as directed. NOTE: Punned thickness shall be measured and paid.

Supply and laying cable protection cover un- reinforced precast concrete cable covers class LV, type-1 flat size 250mmx150mmx40mm for cable protection complete all as specified laid perpendicular to cable as per directed.

Seven Square

Classic Builders

K R JOSEPH AND SONS

M/s Antony Kallarakkal