Construction of Pile foundation at Location No. 373 of 400kV Kashipur-Roorkee Transmission Line

1200 mm diameter R.C.C. verticle bored pile upto 42 m from bottom of pile cap

Extra over item (1200mm diameter R.C.C.vertical bored pile upto 42 m from bottom of pile cap.) for boring including socketing anchoring (if required) with required size,nos. & depth of Reinforcement in weathered rock, shale, fissured rock soft rock and hard rock upto a maximum depth of 5.0m.

Excavation where ever required for pile cap/ tie etc. (other than boring) for all depth and size, in all types of soils including disposal of excavated materials for all lifts and leads, decent etc as directed by Engineer -in - charge together with all labour, tools & tackels,sheeting, sheet pilling, dewatering etc. complete as required for proper execution of the job.

Form work for placing plain or reinforced cement concrete of any type including black out and section at any elevation including all labour, materials , equipments waste for form, shoring, shuttering, strutting, propping, scaffolding, tieing, nailing, caulking, dismentling & removal of form etc. complete

Supply and placing of steel reinforcement of specified grade for R.C.C work in pile, pile cap, pedestal /chimney, tie beam (if required) including straightening, cutting, bending, bindingetc all complete

Providing and laying in position M25 Grade concrete of specified 28 days strenght for pile caps, pedestal/Chimney and tie beam (if required), excluding reinforecment steel and form work but including cement all necessary tools and tackles, labour, materials, equipment for handling, transportation, batching, mixing, placing, vibrating, dewatering etc. all complete (excluding cost of concrete in piles which is including in item no 1.1)

Providing and laying plain cement concrete 1:4:8 (1 cement, 4 coarce sand, 8 graded stone aggregate 40 mm nominalsize) including cement all necessary tools and tackles, labour, materials, equipments for handling, transportion, mixing, placing, vibrating, dewatering etc all complete

Conducting Standard Penetration Test (SPT) at various elevations in pile bore holes in all kind of soils including all labour, materials, tools and tackels, equipment etc. required for successful completion of the job.

Supply and Providing M S liner of 6 mm thick in piles upto 10 m. Depth (max) from bottam of pile cap, limited to the approved drawing including supply, straightening bending, welding all supports, labours tools and tackels plants & equipments with primer and paintining etc. (complete) as required for successful completion of the job.

Conducting integrity test on pile using electronic control unit, hand held hammer accelerometer, computer with required software to assess as installed pile characterstics including mobilisation of necessary manpower, equipments, materials etc.required for successful completion of the job.

Details of documentary evidence submitted in support of Qualification Data

Details of documentary evidence submitted in support of Qualification Data

Audited Balance Sheet and Income Statements enclosed

[Name of Countries],

[Name of Countries],

Details of the proposed sub-contractor/sub-vendor

Details of the plant from where supplies are proposed.

Details of the proposed sub-contractor/sub-vendor

Details of the proposed sub-contractor/sub-vendor

Name of Micro and Small Enterprises (MSEs)

Details of the plant from where supplies are proposed.

Name of Micro and Small Enterprises (MSEs)

Cost of withdrawal of the deviation

Cost of withdrawal of the deviation

Date of joining and designation in our organisation*

Addressed to (name of the Bank)

Award for or against the bidder

Country of origin

Date of joining and designation in our organisation

Date of joining and designation in our organisation

fifteen

sixteen

nineteen

Not Applicable

To be submitted in Soft Copy.

Submission of Hard copy in ‘Original’ and uploading of Scanned Copy

Submission of Hard copy in ‘Original’ and uploading of Scanned Copy

Submission of Hard copy in ‘Original’ and uploading of Scanned Copy

To be submitted in Soft Copy.

Submission of Hard copy in ‘Original’ and uploading of Scanned Copy

To be submitted in Soft Copy.

Submission of Hard copy in ‘Original’ and uploading of Scanned Copy

Submission of Hard copy in ‘Original’ and uploading of Scanned Copy

Submission of Hard copy in ‘Original’ and uploading of Scanned Copy

Submission of Hard copy in ‘Original’ and uploading of Scanned Copy

To be submitted in Soft Copy.

To be submitted in Soft Copy.

To be submitted in Soft Copy.

To be submitted in Soft Copy.

Submission of Hard copy in ‘Original’ and uploading of Scanned Copy