Loading
Loading…
Loading…
Tender Value
₹1.6 Cr
EMD Value
₹2.3 L
Closing Date
4 Feb 2026, 11:00 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
ELECT G
15 conditions · 3 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Similar nature of work for minimum eligibility criteria is as under: "Any electrical engineering work, provided that the tenderer has electrical contractor's license for the voltage that is the highest in the complete work."
3 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
1. I/We have visited the works site and I/We am/are aware of the site conditions. 2. We have read the tender Notice[NIT] details, Tender document along with all the conditions attached/referred to, in this tender document, and agree to abide by the said conditions. 3. We are aware of the fact that the railway reserves the right to amend the scope and value of the contract and to reject[or accept] this offer without assigning any financial liability.
Provision of 750 V Power Supply for HOG testing at Washing Pit/Sick line under DHN Division
EL-47-OPEN-2025-26~ECR
EL-47-OPEN-2025-26
Open
Works - General
12 Months
Dhanbad, Jharkhand
₹0
₹2.3 L
4 Feb 2026
12 Jan 2026
21 Jan 2026
49 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,64,18,378.53 | ||
| — | 18.00 | — | — | ||
| Transportation of 2nd hand rail pole 36 feet long ,from the point of delivery to site of erection and erection of the same with cement concrete foundation ratio 1:3:6 as per drg No EL/T/5- 76 | — | — | — | 41,050.08 | |
| — | 18.00 | — | — | ||
| Scrapping, cleaning & painting of rail pole with 2-coats of Red Oxide primer for entire pole then 2-coatrs of alum. Paint from top up to 5ft above the ground level and 2-coats of Green/Black paint up to 5ft from the ground level. (Paint will be supplied by contractor) | — | — | — | 4,322.88 | |
| — | 18.00 | — | — | ||
| Dismantling/uprooting and transportation of MS Rail Pole to depot | — | — | — | 9,796.68 | |
| — | 36.00 | — | — | ||
| Supply & erection of stay assembly 6 ft long 3/4" dia including anchor plate (Size 15"x15"x3/16" guy wire rope with cement concrete foundation of ratio 1:3:6 including fixing of the complete set | — | — | — | 24,937.92 | |
| — | 4500.00 | — | — | ||
| Supply,Fabrication and fixing on the pole of MS Channel /angle bracket (Size 50mmx 50mmx 6mm) ,top clamp,bracing,Guard bracket etc as per Sr.DEE(G)Drg. No. EL/SK/08-80 and Drg No. EL/T/3-76 and as per requirements including bolts,nuts and washers. | — | — | — | 3,67,020 | |
| — | 36.00 | — | — | ||
| Supply of HT Pin insulator 11 KV, complete with metallic and non-metallic parts, including nuts, bolts and washers. (Accepted Makes: Mayank/ Bharat/Jayshree/Birla Insulator) . | — | — | — | 16,503.12 | |
| — | 36.00 | — | — | ||
| Erection and Supply of 11 KV HT disc insulators, Antifog, glazed, Ball & Socket type, duly cemented and fitted with SGI cap, forged steel ball pin and R shaped security clip attached of EMS 70KN conforming to Specn. IS:731-1971 complete with metallic parts with fixing. (Makes: Mayank/ Bharat/Jayshree, Birla Insulators) | — | — | — | 17,870.76 | |
| — | 3.00 | — | — | ||
| Only stringing/Drawing and Tensioning of ACSR conductor of size , and binding of conductor with insulators (Conductor will be supplied by railway) | — | — | — | 7,352.85 | |
| — | 900.00 | — | — | ||
| Erection of Guard wire , including supply of GI wire having 02 nos, bearer wires of 4/6 SWG (GI) and provision of lacings with 8-SWG(GI), 1st lacing from the support structure being at 1- Mtr and subsequent lacings at 4- meter apart. | — | — | — | 67,239 | |
| — | 3.00 | — | — | ||
| Supply & fixing of Gang Operated Switch vertical type, triple pole air brake outdoor type with dropout fuse unit 400A capacity, suitable for 11KV, complete with 3-insulator, mounted type on suitable base complete with operating rod and locking arrangement including supply and fixing of padlock of Godrej make with key | — | — | — | 17,944.14 | |
| — | 3.00 | — | — | ||
| Supply of 5 KA lightening Arrester (Line type) suitable for 11KV line as per IS: 3070 latest including testing and commissioning. | — | — | — | 8,423.34 | |
| — | 6.00 | — | — | ||
| Supply & fixing of 'DANGER' Board complete with nut & bolts written for 33KV/11KV | — | — | — | 688.98 | |
| — | 3.00 | — | — | ||
| Fabrication, supply, installation, testing and commissioning of outdoor type compact Substation (CSS) consisting of maintenance free transformer of 500 KVA, 11KV/750V, 3-phase including VCB with all protection and metering relay on HT side of Transformer with inbuilt LT panel as per site and HT and LT cabling work as per the following details : A) HT SWITCHGEAR (Conforming to IEC-62271/200) 11KV, 630Amps, 3-phase, 21KA for 3 Sec. SF6 Gas Insulated Copper Busbar Non- Extensible Compact switchgear (Safe Ring Type: CV+M) with Copper busbar type consisting of One No. Fixed Manual Load Break Switch and One No. Fixed Manual Vacuum Circuit Breaker with series trip, self-powered microprocessor based numerical over current relay (IDMTL + Inst.) Protection along with 11KV Metering Cubical of Class 1.0 Accuracy. Relay shall be Ashida make ADR241s or similar with communication Port RS485. ( 50,50N,51,51N) -1No. Protection CT - 40/1A, 2.5VA, Class - 5P10 -1 Set. Metering CT - 50/1A, 2.5VA, Class - 1.0 Accuracy-1 Set. Metering PT- 11000V/3 / 110/3, 50VA, Class - 1.0 Accuracy- 1 Set. Digital Voltmeter with accuacy class 1.0 -1 No. Digital Multifunction Meter with accuracy class 1.0 Voltage Presence Indication for Incoming Supply healthy indication -1 Set, Manometer 1 No. B) TRANSFORMER: 500 KVA 11KV/750V, 3-phase, DYn11 Copper Wounded Cast Resin Dry Type Transformer, Class H Insulation, Temp Rise 90 Deg Centigrade over an ambient of 50 Deg C, Transformer tapings +5% to -5% @ 2.5% per step, % Impedance: 4.5%. WTI Scanner with Alarm and trip contact 1 No. Conforming to IS/IEC-11171/ IEC 60076-11:2018 or latest. C) LOW VOLTAGE SWITCHGEAR - 800A Copper BUSBAR as per standard rated INCOMER FROM TRANSFORMER 630Amps, 750V, 4P, 50kA MDO Type Air Circuit Breaker (ACB) with Microprocessor based release-02 set including over current, short circuit and earth fault protection. RYB- ON OFF TRIP Indication- 01 Set. Digital Multifunction Meter of Class 1.0 Accuracy with RS 485 Port: 1 No. Conforming toIEC-62271/100. D) OUTDOOR ENCLOSURE- Outdoor type enclosure having construction of Galvanized Sheet Steel of thickness 2 mm for Load bearing member and 1.6 mm for Non Load bearing member. The Enclosure shall have IP54 degree of protection for HT & LT switchgear compartment & IP23 degree of protection for Transformer compartment. The enclosure exterior shall be Powder Coated (Colour Light Gray & D.A. Gray). Each compartment will be provided with the door and pad locking arrangement. The Compartment illumination lamp with door operated switch shall be provided for MV and LV compartment. Door Interlock to trip HT breaker on Opening of transformer compartment door to be provided. E) INTER CONNECTION AND EARTHING - Interconnection Between HT switchgear to Transformer shall be using 3C, 120 Sq mm HT Aluminum Cable. Inter connection between Transformer & LT switch gear using Aluminum Busbars. Internal earthing connections by using 50x6 mm GI Strips shall provided including Transformer Neutral earthing. The CSS shall be complete in all respect with its Foundation base as per the manufacturer drawing. Only OEM make CSS will be accepted. Make : CG , ABB , Scheinider ,Alsthom , Siemens , L&T. Inspection by RITES. | — | — | — | 1,25,21,223 | |
| — | 14.00 | — | — | ||
| Design, fabrication, supply, erection (with foundation ) testing and commissioning of weatherproof, IP-55 Feeder pillar, panel enclosures to be treated through seven tank process for superior corrision resistance and weather proofing powder/ epoxy coating to be provided for protection as well as to provide and elegant finish to the panels. Neoprene rubber gaskitting to be provided for dust proofing, wiring is to be done by multistrand, flexible copper conductor with identification feruled insulated socket, lugs, wire arness/looms to be bunched and harried on saddles for mechanical protection with terminals to have ample space for ease of cabling. Each component to be fully accessible for maintenance and reliability including panel inter connection nuts and bolts etc. , each consisting of two no. of 400A/750V MCCB and 02 nos female ZS coupler (01 no. on front and other on back side of panel ) with suitable Digital Ammeter, Digital Voltmeter , LED phase indicator Lamp RYB colour, HRC fuse, Selector switch , copper busbar etc. MCCB Make - ABB,Havells,L&T, Siemens." | — | — | — | 15,39,336.82 | |
| — | 6.00 | — | — | ||
| Making of Earthing pit 15' deep with Copper plate of size 600 mm x 600 mm x 3.15 mm with its top from ground level complete with 20 mm dia GI pipe fitted with alternate layers charcoal and salt at least 150 mm thick around, funnel for watering and one earthing lead 20 mm x 5 mm copper strip in GI pipe 30 mm medium gauge, masonry/housing with CI hinged cover plate with locking arrangement complete in all respect. (Copper strip up to ground level to be supplied). | — | — | — | 37,354.26 | |
| — | 14.00 | — | — | ||
| Provision (sypply and erection) of Earthing station (RI-7021) as per Drg.No. ETI/ OHE/P/ 7020 or latest. (The price shall cover supply and erection of an earth electrode (RI 7021) as per drawing no. ETI/OHE/P/7020. The price shall also cover the provision of a protective concrete Box with removable cover as per drawing. The material should confirm to ACTM vol. II Part II Para 7.1.1 with figure A 3.01. The price shall cover the testing of earth value and display of value on the earth pit. The earth electrode shall normally be of mild steel galvanized perforated pipe of not less than 44 mm nominal bore and about 3 meter length provided with a spike at one end and welded lug suitable for connecting directly Earth wire/MS flat of required size at other end. The connection of Earth wire/M S flats to each electrode shall be made through M S links by bolted joints, fasteners to be supplied by the contractor. The earth surrounding the electrode shall be chemically treated by alternate layers of fine charcoal and salt at least 150 mm all around. The item should be procured from approved supplier of CORE or RDSO, duly inspected by either RITES or Railway Representative deputed by Sr. Div. Elect.Engineer (G)/ Dhanbad.) | — | — | — | 44,646.84 | |
| — | 520.00 | — | — | ||
| Providing and fixing 06 SWG / 5.0 MM dia GI wire on surface or in recess for loop earthing of street light poles, connection from earth pit to main junction board/panel, connecting different earth pits etc. Connection and Looping of earth wire to be done with suitable fasteners, nuts bolts and washer as required. | — | — | — | 3,759.6 | |
| — | 600.00 | — | — | ||
| XLPE HT cable standard company circular Alumminium conductor screened 11 KV, 3 core 120 sq mm XLPE (E) insulated, insulation screened with extruded semi conducting compound in combination with copper tape inner sheathed of PVC tape galvaniz0ed steel flat strip armoured and overall PVC sheathed cable conforming to IS : 7098/II/85. | — | — | — | 10,08,000 | |
| — | 6.00 | — | — | ||
| Supply, making,erection, testing and commissioning of cable indetermination with heat shrinkable jointing kit (Out door) complete with all accessories includidng lugs suitable for 3 core120 sq.mm XLPE aluminium conductor cable of 11 KV grade etc (Make: 'm' Seal, Cab Seal, Yamuna Gases Chem. Ltd.) | — | — | — | 43,111.26 | |
| — | 3200.00 | — | — | ||
| Trenching, laying and back filling of XLPE cable as per Sr.DEE(G)/DHN's drg. No. EL/486-01 (cable will be supplied by the Railway or contractor as applicable) | — | — | — | 1,93,792 | |
| — | 500.00 | — | — | ||
| Laying and fixing PVC/XLPE cables of different sizes ranging from 25 sq mm to 120 sq mm on surface of the wall (normally concealed)/steel structure as per the requirement of site with proper clamping arrangement as required at every 1/2 metre. (Cable will be supplied by Railway or contractor as applicable) | — | — | — | 25,100 | |
| — | 150.00 | — | — | ||
| Trenching, laying and back filling of XLPE cable on pucca/concrete road or concrete/tiled floor through making a trench of 6 inchs depth and 6 inches wide on the road / floor and refilling the trench with cement concrete (1:3:6) and finished to smooth surface in a manner as directed by Section Engineer in charge at site. (Cable will be supplied by Railway or contractor as applicable) | — | — | — | 17,766 | |
| — | 180.00 | — | — | ||
| Cable crossing across railway track/pucca road by boring hole at depth of 01 mtr by using 01(one) nos 150mm dia GI pipe(medium grade) with accessories.GI pipe with accessories will be supplied by the contractor. (Cable will be supplied by Railway or contractor as applicable) | — | — | — | 3,51,477 | |
| — | 90.00 | — | — | ||
| Supply of GI pipe 4" dia, Medium gauge 'B' class including fixing with suitable clampnuts, bolts etc as per requirement (Make : Tata, Bansal, Jindal). | — | — | — | 49,662 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
EL47.pdf
ATTACHMENT
GCCApril-2022.pdf
ATTACHMENT
GCCCorrectionslip1to10.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .