Development of Vending Zone near Block Office under Padampur NAC.

Earth work in hard soil or gravelly soil with 50m. initial lead and 1.5m.initial lift for foundation including rough dressing and breaking clods to maximum 5cm. to 7cm. and laying in layers not exceeding 0.3m. in depth and as per the direction of the E.I.C.

Filling foundation & plinth with excaveted earth or sand well watered & rammed including collecting, supplying and stacking the required material to proper slope & level & thickness with all leads, lifts & delifts including cost, conveyance, royality and other taxes of materials & supply of all labour & T&P required for the work etc. complete in all respect as directed by the Engineer in Charge.

R.C.C. work of M-15 grade with 20mm and down grade black hard granite (crusher broken) stone chips including hoisting and laying etc. complete.

Fly Ash Brick Masonry in Cement Mortar (1:6) using Fly Ash bricks (23 Cm. x 11Cm. x 8Cm.) in foundation and plinth including curing and all cost etc.

Cement concrete M20 grade with 20mm downgraded hard granite crusher broken chips of approved quality free from skin materials mixing by mechanical means including hoisting lowering and laying the concrete in position to proper slope and level and compacting by vibrators in layers not exceeding 0.15m depth and finishing the exposed surface smoothly including watering, curing for required period, cost, conveyance, hire and running charges of all machineries, royalty and other taxes of all materials, labour, labour charges with T&P required for this item etc. complete in all respect as directed by the E.I.C. (A/R-2006, P-29, i-28)

Supply M.S. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of reinforcement and binding wire 18 to 20 gauge as per the direction of E.I.C.

Providing and fixing Ceramic tiles in floors, treads or steps and landing on 25 mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles as directed by the Engineer-in-charge.

Finishing surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials labour T & P etc. as per direction of Engineer -In -charge.

12mm thick cement plaster in C.M.(1:6) over brick masonary including all cost complete.

Painting two coats with any approved colour of weather seal coat to out side surface of wall in Ground Floor

Fixing of 0.30 mm thick G.C.I. Sheet in roof drilling hole in wind ties including fixing of ridges valleys wind ties etc. excluding cost of fittings but including cost of sheet.

Providing, fitting and fixing of Al door with anodized Al. door section of 9202 as vertical member, 9201 as top and 9200 as middle and bottom member with frame section No.9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle no. 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges , etc. complete as per direction of the Engineer-in-charge

Supplying & fixing of MS door and windows welded with standard approved MS grill with approved standard Mssection including etcall cost complete.

Branding for gate

Electrification

Add for Sanitary and PH Items

Add display board

Please Enable Macros to View BoQ information