Construction of 2x5MVA, 33/11KV Substation at Guptkashi ( Madmaheshwar) with 5 Nos 33KV Bay at 33/11KV Sub-station with 33KV Lilo Line and 11 KV Feeder in Distt- Rudraprayag on turnkey basis under SASCI Scheme

Total BoQ2 Supply price

Total BoQ3 Erection price of Supply

Total BoQ4 SGR Building price

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

Instructions to Bidders:- 1. Quoted rate for similar items must be same in each schedule. If any variation, then lowest rate of that item shall be considered for evaluation and award of Work. 2. All materials shall be as per technical specification uploaded with other tender documents. PRICE SCHEDULE: Plant and Equipment to be supplied. (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

New Substation 2x12.5 MVA

33 KV SUB STATION MATERIAL

8 m. LONG STP 410 SP-10 (BPHD GAL.)

8.5 MRT. LONG STP 410 SP-23(BPHD GAL.)

11 MTR. LONGSTP 410 SP-55(BPHD GAL.)

MS Round 32mm dia, 6.21 Kg/mtr for earth mat, electodes for earth mat & delta earthing

DISC INSULATOR B&S 120 KN

11 kV POLYMER DISC INSULATOR (B&S) TYPE

DISC FIT B&S TYPE PANTHER 70 KN(TENSION)

DISC FIT. B&S TYPE WEASEL/RABBIT 45 KN

9 KV 10 KA Polymeric Lightning Arrestor

EARTHING ROD MS 20X2500mm

GI WIRE 5mm/6 SWG

STAY SET GI 16X1800mm

STAY WIRE GI 7/3.15mm 7/10SWG

ACSR WEASEL

ACSR PANTHER

CABLE AL 3X185 SQ. mm XLPE 11 kV

CABLE AL 3X240 SQ. mm XLPE 11 kV

CABLE AL 3X50 SQ. mm XLPE 33kV

CABLE AL 3X300 SQ. mm XLPE 33 kV

J/KIT FOR 3X240mm² 11kV XLPE CABLE (I/D)

J/KIT FOR 3X240mm² 11kV XLPE CABLE (O/D)

J/KIT FOR 3X185mm² 11kV XLPE CABLE(O/D)

J/KIT FOR 3X185mm² 11kV XLPE CABLE (I/D)

CONTROL CABLE 10X2.5 SQ. mm.

CONTROL CABLE 2X2.5 SQ. mm.

CONTROL CABLE 4X2.5 SQ. mm.

CONTROL CABLE 6X2.5 SQ. mm.

LT PVC CABLE 2X6 SQ.mm (UN- ARMORED)

LT PVC CABLE 4X10 SQ.mm

11kV VCB I/C 350 MVA, 600/300/5A,110V AC

11kV VCB FD 350/500MVA,400/200/5A,110VAC

11 kV VCB B/C 350 /500MVA

33 kV VCB, 1250A, 24V

CONTROL PANEL INC 33kV DOUBLE T/F

CONTROL PANEL FDR 33 kV DOUBLE CKT

33 KV CT 200/100/1-1-1A

JUNCTION BOX FOR 33kV CT

JUNCTION BOX FOR 33kV PT

33kV PT of RATIO 33 kV/110V OUTDOOR

POST INSULATOR 33 kV

33 kV LIGHTNING ARRESTER

33 kV FUSE SET

11 kV GANG OPERATING SWITCH

33 kV LINE ISOLATOR 400/800A

33 kV BUS ISOLATOR 400/800A

33/0.433 KV 25 KVA T/F

MS (Rail, RS joist , MS Channel & MS angle, MS flat, MS plate, MS reinforcement bar as per RESSPO/Approved drawings) for Misc. structures for TG, BG, LA, CT, PT, Isolators, P.I., Fuse Sets stay support wire mesh fencing, gate support, cable trench, earthing cleat, pole cross arm etc. design as per site conditions including fabrication, welding, nut & bolts, painting (primer plus two coats of aluminium/green paint) etc. complete in all respect.

Cable Holding clamp with N&B

PG CLAMP ALU ALLOY PANTHER TO DOG

PP & CLAMP WITH N&B ST POLE SP-55

STAY CLAMP FOR SP-23 WITH NUT & BOLT

33KV ISOLATOR CONN.CLAMP FOR PANTHER,N&B

PP & CLAMP WITH N&B ST POLE SP-23

PERFORATED TRAY 400MM FOR CABLE TRENCH

PERFORATED TRAY 200MM FOR CABLE TRENCH

PERFORATED TRAY 100MM FOR CABLE TRENCH

GI PIPE 6 METER LONG

BRACING CLAMP TOP FOR SP-23 WITH N/B

DANGER BOARD

GI Pipe 4'" Dia

Insulated Electrical Piller Taparia

11 KV Fuse Set

Cable Holding Clamp with N&B of Size

PG Clamp for Panther

KM-21 G.I. Pipe 6'' dia 3 meter long

Conne.Suitable for Panther for LA

LED Street Light 50 Watt

Connector of Power T/F LV Side

CHEMICAL EARTHING

GI STRIP 65MMX6MM

Connectors For FUSE SUITABLE FOR PANTHER

Connector for Flex Cu. Conn lug 500x50mm

CONNECTOR SUITABLE FOR PI FOR PANTHER

CONNECTOR FOR T/F SUITABLE FOR PANTHER

CONNECTOR FOR T/F SUITABLE FOR DOG/WEASE

Disc fitting for Panther 120 KN

33 KV Disc insulator polymer, 70KN B&S

Insulators for holding earthing strip

33 KV CABLE J/K XLPE 3X300mm²O/D

33 KV CABLE J/K XLPE 3X300mm²I/D

33kV XLPE HS CABLE J/K 3X50 mm SQ O/D

CABLE AL 4X25 SQ. mm PVC

Iron Clad 30 Amp Switch

DCDB 24V

Connector Suit for CT/PT for Panther/Dog

24 V BATTERY SET

24V BATTERY CHARGER

33 kV CT OUTDOOR CTR 400/200/1-1A

Wire Mesh Fencing

Name Plate of Equip. TG,LI,BI,CT,CB ect.

SUNDRISE ITEM LUG GLADE ETC

GI Strip 40x6 mm

Stone Pad 300x300x75mm

Connector Suitable. Panther for VCB

Dustbin 20 Litre Capacity (Colour Green)

Torch 3 Cell

33 KV Hand Gloves

Earth Chain

Rubber Mat (12mm) 2M X1M X12mm

First aid box

SHOCK TREATMENT CHART

SHUT DOWN/ BREAK DOWN BOARD

WALL CLOCK

D-SPANNER SET

PIPE WRENCH 12''

2.5 KV MEGGAR DIGITAL

EART MEGGAR DIGITAL

INSTRUCTION BOARD

MAXIMUM & MINIMUM DISPLAY BOARD

SUB STATION NAMED BOARD

Portable Foam Type Fire Extinguisher 5LT

90 WATT LED LIGHT WITH ACC.

STAND OF CHUGGI TYPE INCLUDING PAINT

Single Line Diagram Board

Door Mat

Name plate of feeder

Name plate of station t/f

11KV Danger Board with Clamp

33 KV Danger Board with Clamp

Fire Extinguisher ABC Type 5kg

Steel Almirah

Office Table size (4x2.5)

Fire Bucket Stand with Buckets

Steel Cabinet

Steel office Table

Steel office chair Godrej

Meggar 5 KV Digital

33 KV LINE MATERIAL

9 MRT. LONG STP 410 SP-33(BPHD GAL.)

11 MTR. LONGSTP 410 SP-55(BPHD GAL.)

MS ANGLE 65X65X6 mm

MS CHANNEL 100X50 mm

MS CHANNEL 125X65 mm

11 kV POLYMER DISC INSULATOR (B&S) TYPE

33 kV POLYMER DISC INSULATOR (B&S) TYPE

11 kV POLYMER PIN INSULATOR WITH PIN

33kV 10KN POLYMER PIN INSULATOR WITH PIN

DISC FIT. B&S TYPE DOG/RACOON 70 KN

DISC FIT. B&S TYPE WEASEL/RABBIT 45 KN

X ARM CHANNEL 100X50 mm V TYPE 33 kV

EARTHING ROD MS 20X2500mm

GI WIRE 4mm/8mm SWG

GI WIRE 5mm/6 SWG

LT Shackle Insulator With N&B

STAY SET GI 20X1800mm

STAY WIRE GI 7/4.0 mm 7/8 SWG

ACSR WEASEL

ACSR DOG

CABLE AL 3X300 SQ. mm XLPE 11 kV

J/ KIT FOR 3X300mm² 11kV XLPE CABLE(I/D)

J/KIT FOR 3X300mm² 11kV XLPE CABLE(O/D)

Bolt & Nut 150x12 mm

Bolt & Nuts 50x16 mm

Eye Bolt 190x16 mm With Nut & Bolt

E-Clamp for SP-55

Earth wire clamp with N&B

Holding Clamp for ST Pole SP-72 with N/B

Bracing Clamp for SP-55 with N/B

LT Shackle Insulator Clamp

E- CLAMP

E- Clamp for SP-33

F Clamp

EARTH WIRE CLAMP FOR SP-55 WITH N/B

PP & CLAMP WITH N&B ST POLE SP-55

Stay Clamp for SP-55 With Nut & Bolt

STAY CLAMP FOR SP-33 WITH NUT & BOLT

PP & CLAMP WITH N&B ST POLE SP-33

PG CLAMP FOR RABBIT/WEASEL WITH N/B

PG Clamp For Dog Conductor

EARTH WIRE CLAMP FOR SP-33 WITH N/B

Stay Clamp D/E for SP33 With N&B

NUMBER PLATE WITH CLAMP

G.S Earth wire 7/16 SWG

TOP BRACING CLAMP BOTTOM WITH N&B SP-33

Earth Wire Clamp WITH N&B SP-33

33 KV Mid Span Jointing Kit

33KV Biometric crimping Lug

33 KV IPC with Al. Ball for Earthing

33 KV Tension clamp with Bail & IPC

33 KV IPC for covered to covered conduct

33 KV IPC for covered to Bare conductor

33 KV Cable Ties for Insulator

HDPE PIPE PE80 PN6 160mm

G.I. PIPE 6 INCH

Danger board with Clamp (SP-33)

Danger board with Clamp (SP-55)

PP & CLAMP WITH NUT & BOLT FOR GUARDING

PP CLAMP FOR SPECIAL TYPE BRACKET

33KV AAAC COVERED COND. AL-59, 160 SQMM.

ALUMINIUM BINDING WIRE

BARBED WIRE

Stone Pad 300x300x75mm

11 KV LINE MATERIAL

11 MTR. LONG STP 410 SP-55(BPHD GAL.)

8.5 MRT. LONG STP 410 SP-23(BPHD GAL.)

ACSR RABBIT

GI WIRE 3.15 mm/10mm SWG

MS ANGLE 65X65X6 mm

MS CHANNEL 125X65 mm

11 kV POLYMER DISC INSULATOR (B&S) TYPE

11 kV POLYMER PIN INSULATOR WITH PIN

DISC FIT. B&S TYPE WEASEL/RABBIT 45 KN

X ARM ANGLE 65X65X6 mm V TYPE 11

X ARM CHANNEL 100X50 mm V TYPE 33 kV

EARTH WIRE GI 7/1.6mm 16 SWG

EARTHING ROD MS 20X2500mm

GI WIRE 5mm/6 SWG

STAY SET GI 16X1800mm

STAY WIRE GI 7/3.15mm 7/10SWG

Nut & Bolts

PP & CLAMP WITH N&B ST POLE SP-55

BRACING CLAMP BOTTOM WITH N&B SP-55

BRACING CLAMP TOP WITH N&B SP-55

Earth Clamp STP SP-33/55/72 Pole WithN&B

STAY CLAMP FOR SP-55 WITH NUT & BOLT

11 KV CABLE TIES FOR PIN INSULATOR

11 KV IPC FOR COVERED TO COVERED COND.

11 KV IPC FOR COVERED TO BARE CONDUCTOR

11 KV MID SPAN JOINTING KIT

IPC WITH AL. BAIL FOR EARTHING 11KV

11 KV Vertical type ISOLATOR

11KV AAAC AL-59 , 70 SQ.MM COVERED COND

11kv, 3-ph fault passage indicator/fault

11 KV TENSION CLAMP WITH BAIL & IPC

STAY CLAMP FOR SP-23 WITH NUT & BOLT

EARTH WIRE CLAMP FOR SP-23 WITH N/B

PP & CLAMP WITH N&B ST POLE SP-23

BRACING CLAMP TOP FOR SP-23 WITH N/B

BRACING CLAMP BOTTOM FOR SP-23 WITH N/B

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

Instructions to Bidders:- 1. All materials shall be as per technical specification. PRICE SCHEDULE : Installation/Erection charges including Testing and commissioning (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

New Substation 2x3.15 MVA

33 KV SUB STATION MATERIAL ERRECTION WORK

NSI_EARTH FILLING

Cement concreting work in ratio 1:4:8

Cement concreting work in ratio 1:2:4

BRICK WORK IN 1:4 RATIO

CEMENT PLASTER WORK

FENCING OF YARD ( Wire mesh fencing with gate duly painted on both side as per drawing. )

Making cable trench.including fabrication, fixing of MS angle 50/40X6 mm size (excluding cost of MS angle/ MS bar) on side edge with all excavation, CC work, brick work, fixing of cable support angle one/two tier as required with stopper arrangement at 0.75 mtr gap throughout the length of the trench, making of cable trench covers with MS Bar welded mesh angle frame with lifting hooks, fixing of perforated tray complete as per drawing including cost of sand, cement, bricks, metal etc.

BRICK WORK 1:6 SUB STRUCTURE

BRICK WORK 1:6 SUPER STRUCTURE

SUPPLY&ERRECT GRAVEL PITCHING 1/2"- 3/4"

CHEMICAL EARTHING

ERECTION OF EARTHING ROD

ERECTION OF 11 KV STAY SET

ERECTION OF SINGLE SP-10 POLE

ERECTION OF SINGLE SP-23 POLE

ERECTION OF SINGLE SP-55 POLE

PAINTING OF STP WITH STRUCTURE

RR MASSONARY WORK FOR DTR PLINTH

FIXING OF TPMO

LAYING OF WEASEL CONDUCTOR IN HT LINE

CARTAGE 5/8 MVA POWER T/ F(150-200KM)

ERECTION OF POWER T/F(8/5 MVA)

ESCAVATION OF EARTH FOR STRUCT. ERECTION

GROUTING OF STRUCTURE IN CC 1:3:6

INSTALLATION OF 33 KV CT WITH ALL CONN.

ERECT.33 KV CONTROL PANEL(FDR/T/ F)

INST. OF DANGER BOARD/NUMBER PLATE

ERECTION OF 33 KV VCB

FIXING OF PP & CLAMP WITH N&B FOR SP-55

ERECTION OF 11 KV VCB I/C

ERECTION OF 11 KV VCB O/G

ERECTION OF 11 KV VCB B/C

LAYING OF STAY WIRE

LAYING OF (2.5*4) CONTROL CABLE

ERECTION OF LINE ISOLATOR STRUCTURE

FABRICATION OF STRUCTURE

INST.OF 33KV POST INSULATOR WITH ALL CON

ERECTION OF BUS ISOLATOR STRUCTURE

ERECTION & LAYING OF LT XLPE CABLE 2X6

INSTALLATION OF DCDB INCLUDING TESTING

INSTALLATION OF ACDB INCLUDING TESTING

SAGGING/RESAGGING ACSR PANTH. COND. LINE

ERECTION OF 33/0.433KV S/S TRANSFORMER

ERECTION OF FLEXIBLE CU. CONN. 500X50 MM

ERECTION OF 24 VOLT BATTERY SET

ERRECTION OF 33KV PT

ERREC. CONTROL CABLES OF SIZE 6X2.5SQ.MM

LAYING OF 11KV CABLE 3X185 SQ.MM.

ERREC. OF 11KV CABLE J/KIT 3X185 I/D

ERREC. OF 11KV CABLE J/KIT 3X185 O/ D

INSTALLATION OF J/KIT 11KV 3X240 O/D

INSTALLATION OF J/KIT 11KV 3X240 1/D

ERECTION OF CONTROL CABLE 10CX2.5 SQMM

ERECTION OF 32 MM ROUND (for earth mat, electodes for earth mat & delta earthing)

INSTALLATION IRON CLAD 30 AMP SWITCH

ERECTION & LAYING OF 33KV CABLE 3X50SQMM

FIXING OF 33 KV O/D CABLE J/KIT 3X50SQMM

PERFORATED CABLE TRAY 200 MM

PERFORATED CABLE TRAY 100 MM

ERECTION OF 65X6 MM GI STRIP

FIXING OF PERFORATED CABLE TRAY 400MM

FIXING OF G.I PIPE 3 MTR LONG

ERECTION OF NAME PLATE OF FEEDER

ERECTION OF NAME PLATE OF SATION T/F

ERECTION OF 11KV DANGER BOARD WITH CLAMP

ERECTION OF 33KV DANGER BOARD WITH CLAMP

ERECTION OF 40X6MM GI STRIP

FIXING OF 33 KV DISC INSULATOR 70KN

ERECTION OF DISC FITTING 70KN

FIXING OF 33 KV DISC INSULATOR 120KN

ERECTION OF DISC FITTING 120KN

FIXING OF PG CLAMP PANTHER TO PANTHER

ERECTION & LAYING OF 33KV CABLE 3X300SQM

FIXING OF 33 KV O/D CABLE J/KIT 3X300 SQ

ERECTION & LAYING OF 11KV CABLE 3X240 SQ

ERECTION OF LT CABLE 4X25 SQ MM

ERECTION OF CONTROL CABLE 2X2.5 SQ MM

FIXING OF PG CLAMP PANTHER TO DOG

FIXING OF CONNECTOR FOR LA SUITABLE FOR

FIXING OF CONNECTOR ISOLATOR FOR PANTHER

FIXING OF CONNECTOR CTPT FOR PANTHER/DOG

FIXING OF CONNECTOR SF6/VCB FOR PANTHER

FIXING OF CONNECTOR FOR FUSE FOR PANTHER

FIXING OF CONNECTOR FOR T/F FOR PANTHER

FIXING OF CONNECTOR FOR T/F FOR LT SIDE

FIXING OF CONNECTOR STATION T/F FOR DOG

ERECTION OF SUNDRIES ITEMS

FIXING OF 11 KV POLYMER DISC INSULATOR

FIXING OF 11 KV DISC FITTING FOR WEASEL

ERECTION OF G.I. WIRE 6 SWG

FIXING OF CABLE HOLDING CLAMP

FIXING OF INS FOR HOLDING EARTHING STRIP

FIXING OF JUNCTION BOX FOR CT

FIXING OF JUNCTION BOX FOR PT

FIXING OF 11 KV FUSE SET

FIXING OF 33 KV FUSE SET

FIXING OF GI PIPE 6 MTR FOR VERTICAL BUS

FIXING OF 11 KV LIGHTNING ARRESTOR

FIXING OF 33 KV LIGHTNING ARRESTOR

LAYING OF 4X10SQ MM LT PVC CABLE

FIXING OF PP CLAMP FOR SP-23

ERECTION OF BRACING CLAMP FOR SP-23

ERECTION OF STAY CLAMP FOR SP-23

FIXING OF CABLE HOLDING CLAMP N&B OFF SZ

FIXING OF CONNECTOR FOR PI FOR PANTHER

INSTALLATION OF FIRE EXTINGUISHERS

ERECTION OF NAME PLATES

INSTALLATION OF FOAM TYPE FIRE EXTINGUSH

ERECTION OF 24 VOLT BATTERY CHARGER

FIXING OF 90W LED LAMP

FIXING OF 50 W LED LAMP

LAYING OF RUBBER MAT

FIXING OF METAL FIRE BUCKET SANDFILLED

FIXING OF FIRE BUCKET STAND CHUGGI TYPE

ERECTION OF INSTRUCTION BOARD

ERECTION OF SINGLE LINE DIAGRAM BOARD

ERECTION OF MAXIMUM & TRIPPING BOARD

ERECTION OF SUB-STATION NAMED BOARD

ERECTION OF STONE PAD

ERECTION OF T&P ITEMS

ERECTION OF MISC. ITEMS

33 KV LINE ERRECTION WORK

Cement concreting work in ratio 1:4:8

BRICK WORK 1:6 SUB STRUCTURE

ERECTION OF EARTHING ROD

FABRICATION OF STEEL

ERECTION OF 33 KV STAY SET

ERECTION OF SINGLE SP-33 POLE

ERECTION OF SINGLE SP-55 POLE

ERECTION OF SP-33 DOUBLE POLE

ERECTION OF SP-55 DOUBLE POLE

ERECTION OF SP-33(11KV/33 KV) FOUR POLE

ERECTION OF SP-55(11KV/33 KV) FOUR POLE

PAINTING OF SP-33 POLE

ERECTION OF BRACKET IN 11 KV LINE

LAYING OF DOG CONDUCTOR IN HT LINE

GUARDING OF 33 KV LINE

FIXING OF 33 KV XLPE JOINTING KIT

ESCAVATION OF EARTH FOR STRUCT. ERECTION

FIXING OF 33 KV TENSION CLAMP WITH IPC

FIXING OF 33 KV IPC FOR CC TO CC COND.

FIXING OF 33 KV IPC FOR CC TO BARE COND.

FIXING OF 33 KV MID SPAN JOINTING KIT

FIXING OF 33 KV BIMETALIC LUG

FIXING OF IPC WITH AL. BAIL FOR EARTHING

FIXING OF 33KV CABLE TIES

ERECTION OF TRI POLE FOR ST POLE SP-33

LAYING SPREADING,STRINGING AAAC CONDUCT.

PAINTING OF SINGLE POLE (SP-55)

PAINTING OF DOUBLE POLE (SP-33)

PAINTING OF DOUBLE POLE (SP-55)

PAINTING OF TRI POLE (SP-33)

PAINTING OF FOUR POLE (SP-33)

PAINTING OF FOUR POLE (SP-55)

ERRECTION OF HDPE PIPE 160/90/65

SHIFTING REALIGNMENT 11KV SP,DP/ LT LINE

LOOPING AND CHOPPING OF TREE BRANCHES

11 KV LINE ERRECTION WORK

ERECTION OF EARTHING ROD

FABRICATION OF STEEL

EXCAVATION OF PIT FOR STAY SET

ERECTION OF 11 KV STAY SET

GROUTING OF STAY SET

EXCAVATION OF PIT FOR POLE

ERECTION OF SINGLE SP-55 POLE

ERECTION OF SP-55 DOUBLE POLE

ERECTION OF SP-55(11KV/33 KV) FOUR POLE

ERECTION OF SINGLE SP-23 POLE

ERECTION OF SP-23 DOUBLE POLE

ERECTION OF SP-23 FOUR POLE

GROUTING OF POLE

MUFFING OF POLE SP-55

MUFFING OF POLE SP-23

PAINTING OF SP-55 POLE

PAINTING OF SP-23POLE

LOPPING & CHOPPINGOF TREE BRANCHES

CONST.,INST.OF DANGER BOARD/ NUMBER PLATE

FIXING OF 11KV 90KN TENSION CLAMP B&IPC

FIXING OF 11 KV IPC FOR CC TO BARE COND.

FIXING OF 11 KV MID SPAN JOINTING KIT

FIXING OF 33KV CABLE TIES

FIXING OF 11KV IPC FOR COVERED - COVERED

SUPPLY & FIXING OF ANTI CLIMBING DEVICE

LAYING SPREADING,STRINGING AAAC CONDUCT.

INSTAL & MOUNT OF 11KV, 3-PH. DOUBLE BRK

INSTAL & MOUNT 11KV, 3-PH FAULT LOCATOR

CONST. OF PLINTH FOR 11 KV D/P STRUCTURE

LAYING OF RABBIT CONDUCTOR IN HT LINE

GUARDING OF LT/11 KV LINE

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

Instructions to Bidders:- 1. All materials shall be as per technical specification. PRICE SCHEDULE : Installation/Erection charges of SGR/store/Land devlopment including Testing and commissioning (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 Sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. (All kinds of soil). For Levelling of Land

Earth work in excavation by mechanical means (Hydraulic excavator ) manual means in foundation tranches (not exceeding 1.5m in width or 10 Sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. (All kinds of soil).

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating Each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5m

Supplying and filling in plinth with Jamuna sand under floors including. Watering, ramming consolidating and dressing complete.

Earth filling under floor and in S/S area including cost of earth. Earth to be obtained from outside the corporation area including its cartage watering, dressing, ramming in 20cms. thick layers and including all leads and lifts etc.(Rates Approved by S.E. Civil vide letter No. 410- ECC/A.O.R. dated 01-06-2012)

Clearing jungle including uprooting of rank vegetation, grass, brush wood trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Providing and Laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level:1:2 :4 (1 Cement :2 coarse sand: 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level:1:4 :8 (1 Cement :4 coarse sand: 8 graded stone aggregate 40 mm nominal size)

Providing and laying damp-proof course 40 cm thick with cement concrete 1:2:4 ( 1 cement :2 coarse sand: 4 graded stone aggregate 12.5 mm nominal size)

Extra for providing and mixing water proofing material in cement concrete work @ 1 Kg per 50 Kg of cement.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level: 1:1:5:3 (1 cement : 1.5 coarse sand: 3 graded stone aggregate 20 cm nominal size).

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement. 1:1:5:3 (1 cement : 2 coarse sand 4 graded stone aggregate 20 cm nominal size). Columns

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral/ stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1: 1.5 : 3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting propping etc. and removal of form for: Foundations footings, bases of columns, etc. For mass concrete.

Centering and shuttering including strutting propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform.

Centering and shuttering including strutting propping etc. and removal of form for: Shelves (Cast in situ)

Centering and shuttering including strutting propping etc. and removal of form for: Lintels, beams, plinth beams girders, bressumers and cantilevers,

Centering and shuttering including strutting propping etc. and removal of form for:. Columns, Pillars, Piers, Abutments, Posts and Struts.

Centering and shuttering including strutting propping etc. and removal of form for:. Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like.

Centering and shuttering including strutting propping etc. and removal of form for. Weather shade, Chaffas, corbels etc. including edges.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (Cold Twisted Bars ).

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Above plinth level. (Cold Twisted Bars ).

Add or deduct for plaster drip course/groove in plastered surface or moulding to R.C.C projection

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in: Cement mortar 1:4( 1 cement : 4 coarse sand)

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in: Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Brick work with F.P.S. Bricks of class designation 75 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above planth level up to floor V level. Cement morat 1:4 ( 1 cement : 4 coarse sand)

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)

Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like.Cement mortar 1:6 (1 cement : 6 coarse sand)

Coursed rubble masonry (first sort) with hard stone in foundation and plinth with: Cement mortar 1:6( 1cement:6 coarse sand)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified by the manufacture) of approved make in all colours, s@ 3.3Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete. (In toilet (2x1.77+2.x1.44-0.75)= 5.67)

Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4mm in both directions with wire of dia 0.63 mm all complete With 12 mm mild steel U beading

Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 125x65x2.12 mm

Providing and fixing ISI marked oxidised M.S. pressed butt hinges withnecessary screws etc. complete 100x58x1.90 mm

Providing and fixing ISI marked oxidised M.S. pressed butt hinges withnecessary screws etc. complete 75x47x1.70 mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete 100x10 mm

Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete 100 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete200x10 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium sliding door bolts ISI marked anodised (Anodic coating not less than grade AC 10 as per IS:1868)transparent or dyed to required colour or shade with nuts and screws etc. complete: (100x10mm)

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary scerews etc. complet: 125mm

Providing and fixing aluminium handles floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary scerews etc. complet: Single rubber stopper

Providing and fixing aluminium handles floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary scerews etc. complet: Twin rubber stopper

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes

Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Steel work welded in built up sections/ framed work including cutting, hoisting fixing in position and applying a priming coat of approved steel primer susing structural steel etc. as required.

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 5.5 mm thick glass panes

Cement concrete flooring 1:2:4 (1 cement : 2coarse sand : 4 gradd stone aggregate) finished with a floating coat of neat cement including cement slurry, (40 mm thick with 20mm nomnal size stone aggregate).

Providing and fixing glass strips in goints of terrazo/cement concrete floors. (40mm wide and 4mm thick)

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS; n 20 mm thick Cement Mortar 1:4 ( 1 cement :4 Coarse sand )

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size including finishing complete

Providing and fixing glass strips in goints of terrazo/cement concrete floors. (40mm wide and 4mm thick)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 (i) Single socketed pipes (75mm diameter)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointin with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. (i) Single socketed pipes (110mm diameter)

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per Sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling / self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (+0.05 %), Zinc coating 120 grams per Sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete Ridges plain (500 - 600mm)

12mm cement plaster of mix: 1:4 (1cement : 4coarse sand)

12mm cement plaster of mix: 1:6 (1cement :6coarse sand)

15mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1cement :6coarse sand)

6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)

Distempering with oil bound washable distemper or approved brand and manufacture to give an enen shade . New work (two or more coats ) over and including priming coat with cement primer.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved prand and manufacture.

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to repare the surface even and smooth complete.

Disposal of buildin rubbish/malba/similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 Kg per 100 m (minimum), between the two posts fitted and fixed with G.I.staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to bemade per metre cost of total length of barbed wire used. With G.I. barbed wire metre

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast lron P or S trap. 10 litre low level white P.V.C. flushning cistem with manually controlled device (handle lever ) conforming to IS: 7231, with all fitting and fixtures complete including cutting adn making good the walls and floors wherever required: White Vitreous china Orissa patern W.C. pan of size 580x440mm with integral type foot rests.

Providing and fixing wash basin with C.I. brackets 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets cutting and making good the walls wherever require: White Vitreous china Flat back wash basin size 550x400mm with a pair of 15mm C.P. brass pillar tap. In Toilet

Providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality ) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing PTMT towel ring trapezoidal shape 215mm long 200mm wide with a Minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88gms.

P/F PTMT Tower rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm,weighing not less than 190 gms.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall, 15 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall, 15 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 15 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 20 mm nominal outer dia Pipes.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.15 mm dia nominal bore Internal work - Exposed on wall

Concealed pipe including painting with anti corrosive bitumasiic paint cutting chases and making good the wall . 15mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 15mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 20mm dia nominal bore

Constructing masonry Chamber 30x30x50 cm inside with 75 class designation brick work in cement mortar 1:4 (1cement : 4coarse sand) for stop cock with C.I. surface bozx 100x100x75mm (insside) with hinged cover fixed in cement concrete slab 1:2:4 mix ( 1cement : 2coarse sand: 4 graded stone aggregate 20mm nomnal size) necessary excavation foundation concrete 1:5:10( 1cement:5fine sand :10 graded stone aggregate 40mm nominal size) and inside plastering with cemnt mortar 1:3 (1cement:3coarse sand ) 12mm thick finsished with a floating coat of neat cement complete as per standard design . With F.P.S. bricks

Providing and placing on terrace (at all floor levels) polyethylene water stonrage tank ISI: 12701 marked with cover and suitable locking arrangement and making necessary holes for nilet, outlet and overflow pipes but without fittings and the base support for tank.

Providing anf fixing C.P. brass bib cock of approved quality conforming to IS: 8931 (15mm nominal bore).

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS Standards and weighing not leass than 690 gms. (15mm nominal bore)

Providing and fixing C.P. brass stop cock (concealed ) of standard design and of approved make conforming to IS:8931. (15mm nominal bore)

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931 a(15mm nominal bore)

P/F PTMT soap dish holder having lengthof 138 mm breadth of 102mm height of 75 mm with concealed fitting arrangements weighing not less than 106 gms

Supply of Beldar for Miscellaneous Civil Works .( Item Code 0114)

Supply of Stone for Masonry Work .( Item Code 1157)

Supply of Stone Aggregate (Single Size) 20mm Nominal Size (Item Code 0295)

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 Sqmm FR PVC insulated copper conductor single core cable 1.5 Sqmm FR PVC insulated copper conductor single core cable etc as requited. GROUP B

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required Circuit / sub main wiring in PVC conduit 2*1.5 Sq.M * 1*1.5 Sq.M

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ sub main wiring in PVC conduit 2*2.5 Sq.M*1*2.5Sq.M

Wiring for circuit/submain wiring alongwith earthwire with the following sizes of FRLS PVC insulated copper conductor , single core cable in surface/recessed PVC conduit as required. 2X4 Sqmm + 1X4 Sqmm earthwire

S/F stepped type electronic fan regulator on the existing moduler plate switch box including connection but excluding modular plate etc.as required.

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep

S/F 8ways double door single pole and netural,sheet steel,MCB D.B 240 volts on surface/recess complete with tinned copper bus bar netural bus bar, earth bar,din bar detachable gland plate,interconnections, phosphatized and power painted including earthing etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator 12 way , Double door

S/F 5amp to 32amp rating 240 volts,B series,MCB suitable for lighting and other loads of single pole in the existing MCB D.B complete with connection,testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40AMP rating double pole 240 V isolater in existing MCB DB complete

Earthing with GI earth plate600x600x6mm thick including accessories and providing masonary enclosure with cover plate having locking arrengment and watering pipe etc.as required (but without charcoal or coke and salt)

Supplying of 20watt LED Tubelight Philips or Equivalent Make as approved by E.I. S.E. letter no-832/ECC/D.Dun/Extra Item Dated-29-08-2022

Supplying of Exhaust Fan 250mm Sweep of Orient or Equivalent Make as approved by E.I S.E. letter no-832/ECC/D.Dun/Extra Item Dated-29-08-2022

Supplying of Exhaust Fan 450mm Sweep of Orient or Equivalent Make as approved by E.I S.E. letter no-832/ECC/D.Dun/Extra Item Dated-29-08-2022

Supplying and Installation of 1.00 H.P. Water pump Havells or equivalent make all complete as per Direction of E.I S.E. letter no-832/ECC/D.Dun/Extra Item Dated-29-08-2022