Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.9 LAccepted-AOC 67 NIRANJANPUR SAHARANPUR ROAD PO MAJRA DEHRADUN UK 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹11.6 L+₹54,985.50 (4.96%)Rejected-AOC | L2 | Rejected-AOC Not Lowest | |
| 3 | L3₹11.7 L+₹58,172 (5.25%)Rejected-AOC MAHALAKPUR NIZAMPUR AGHWANPUR ROAD AGHWANPUR MORADABAD UTTAR PRADESH 244001 | MORADABAD | UTTAR PRADESH | 244001 | L3 | Rejected-AOC Not Lowest |
Tender Value
₹12 L
EMD Value
₹24,000
Closing Date
6 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE HILLS DEHRADUN
Headquarters Commander Works Engineers (Hills) Military Engineer Services, Mall Road, Dehradun Cantt
ADDITION ALTERATION OF THE ACS SECTION IN BUILDINGS NO P 41 AT NHO UNDER AGE B R III OF GE CLEMENT TOWN DEHRADUN
2022_MES_505389_5
85351/CLT/E8
Open Tender
Civil Works
Item Rate
150 days
GE Clement Town
Class E Cat a i
6 documents required · 6 mandatory
₹500
GE Clement Town
₹24,000
Yes
13 Sept 2022
14 Jul 2022
15 Aug 2022
14 Jul 2022
6 Aug 2022
25 Jul 2022
14 Jul 2022 - 18 Jul 2022
90 days
Amount
Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed by Engr-in-Charge.
Dismantling wall & ceiling boards (fibre, insulation etc) or insulation boards, slabs, blankets any thick ness including cover fillets complete all as specified and directed by Engr-in-Charge.
Dismantling of boarding of any type/size as in CB/wardrobes or fixed in any position in hardware (if any) etc complete all as specified and directed by Engr-in-Charge.
Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.
Taking down cement plaster of any description on brick work or stone masonry walls including rackingout joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.
Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size exc 1.5 Sqm and n.exc 4 Sqm complete all as specified and directed by Engr-in-Charge.
M&L brick work with sub class "B" old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed by Engr-in-Charge.
M&L for Vitrified any design and pattern coloured tiles scratch proof and stain resistance double charged (water absorption not more than 0..08%) 9-10mm thick (square/ rectangular) breaking strength more than 1300 N area of each tiles exc 0.42 Sqm but n.exc 1.00 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6 complete. Tiles shall be comfirming to IS-15622.2017, Group B1 complete breaking strength 1300 N (Minimum) all as specified and directed. Note :- Shade of the tiles including Colour, Design and pattern shall be apporved by GE. all as specified and directed
M&L for Vitrified any design and pattern coloured tiles scratch proof and stain resistance double charged (water absorption not more than 0.08%) 9-10mm thick (square/ rectangular) breaking strength more than 1300 N area of each tilesexc 0.42 Sqm but n.exc 1.00 Sqm as in vertical surface such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 to recieve tiles complete. Tiles shall be comfirming to IS-15622.2017, Group B1 complete breaking strength 1300 N (Minimum) all as specified and directed. Note :- Shade of the tiles including Colour, Design and pattern shall be apporved by GE. all as specified and directed.
M&L for 16-18mm thick pre polished granite stone slab (apparent density not less then 2700 kg/cum of any colour) as in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust to match with marble shade over and including cement screed bed 15mm thick in CM (1:6) complete all as specified and directed by Engr-in-Charge.
S&F in repair door closer aluminium ISI mark (extruded section) body hydraulically regulated, designation No. 3, universal type, complete all as specified and directed by Engr-in-Charge.
S&F Window blind is made up of several long horizontal or vertical slats of various types of hard material, including wood, plastic or metal which are held together by cords that run through the blind slats or roller window blinds made up of thermal fabric with roll up blinds mechanism, plain or printed type, of design and shade as approved by the Engineer-In-Charge complete with all connected fittings and fixtures incl taking down old drapery rods/ pelmets complete all as specified and directed by Engr-in-Charge.
M&L 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc and removing unserviceable material, from wall/chhajja including all loose dust particle from brick and application of two coat of smart care damp block 2k slurry of Make Asian paint or equivalent by brush or roller on brick surface (second coat shall be applied after 4-6 hrs of 1st coat) to achieve a coverage of 0.72 kg/sqm/coat and M&L for 15mm thick cement plaster in CM 1:4 after preparation of surfaces complete all as specified and directed by Engr-in-Charge. Note : The work is required to be carried out upto Triple storey building. The cost of scaffolding shall be deemed to be included in the item. The contractor shall also make necessary safety arrangement for labour
M&L for preparation of newly plastered surface of external wall all as prescribed by manufacture of paint and applying two coats of exterior anti fungal acrylic emulsion paint (walmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed as site by Engr-in-Charge. Note :- (i) The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of emulsion paint. The cost of all materials, T&P and labour required for preparation of surface are deemed to be included in the rates quoted. (ii) The colour/shade will be all as approved by GE. (iii) The cost of scaffolding wherever required are deemed to be included in the rates quoted by the contractor. (iv) After carrying out preparation of surface the same shall be got approved from GE before application of distemper for each building.
M&L for three coats of white wash to newly plastered surfaces of walls including preparation of surfaces, complete all as specified and directed by Engr-in-Charge.
S&F in repair powder coated anodised Aluminium door shutters with aluminium frame, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, 02 Nos Aluminium handle 150mm long, 02 Nos Aluminium tower bolt 150mm long, 03 Nos 100mm long aluminium butt hinges in each door, with complete locking arrangement, anodised alumnium snap beading screws etc. including 5.5mm thick tinted/Clear glass complete all as specified and directed by Engr-in-Charge.
S&F in repair Aluminium powder coated three track sliding windows (with three sliding shutters, (One with and incl stainless steel wire mess and two with and incl 4mm thick sheet glass panes) aluminium sections not less than 1.1kg per meter for bottom track and top track and side track 0.98 kg per metre, bottom shutter frame 0.55 kg per metre, top shutter frame 0.47 kg per metre, shutter sides, 0.47 kg per metre and interlock sides 0.45 kg per metre including suitable nylon beading channel gasket, nylon rollers Maruthi lock with handles etc complete all as specified and directed.
S&F in repair Aluminium powder coated fixed glazing with aluminium frame of weight not less than 1.2 kg/m with and incl 8mm thick tinted glass (plain/ tinted) of size as directed by the Engineer-In-Charge including suitable nylon beading channel gasket, etc complete all as specified and directed by Engr-in-Charge. Make- Antelio glass of Saint Gobain
S&F 18 guage powder coated Aluminuium framed work of size 75 x 45mm with and including snap beads rubber gasket, fixing arrangement in partition fixed in wall & floor upto minimum 2.90m high in two panels complete all as specified and directed by Engr-in-Charge. Note : (a) 5.5mm thick tinted or clear glass in panels. (b) 12mm thick prelaminated interior grade both side laminated particle board in panels.
S&F false ceiling with Fully perforated 10mm thick Square edged GRG False Ceiling tiles at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of size 595 x 595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Nomocombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120grams per Sqm incliuding both sides) comprising of main-T runners of size 15x32mm of length 3000mm, cross-T of size 15x32mm of length 1200mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per Sqm) i.e. 50mm lon, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod up to 1000mm length and L-shape level adjuster os size 85x25x2mm. Galvanized iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engr-in-Charge. Make : Diamond Ceiling, Gypcore, Maruti, Gypsum, Shera
S&F 6mm thick PVC heavy grade hollow profile designer sheet strips & channel feathered at edges of approved quality and design PVC Wall/Ceiling lining fixing with frame including all beading, matching PVC angles at all window corners with all necessary frame as required complete all as specified and directed by Engr-in-Charge. Make Raj Shree Plastic wood/Sintex/Archid Plywood/ Kumar Arch Tech Ltd, Eco Cell.
S&F Pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa AZ-150 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.
M&L Mild steel framed work such as grills, gratings etc disigned with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings framework of water tanks, Sunshade for Window and similar work incl fixing arrangement complete and confirming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-Charge.
M&L for preparing new steel and iron surfaces of any description over 10 CM width or girth and applying two coats of synthetic enamel paint of any tint over one coat of red oxide primer complete all as specified and directed by Engr-in-Charge.
Dismantling and taking down U/S copper / aluminium point wiring (light, fan, socket, power) complete fitting such as switches, ceiling roses, pendants, lamp holder, light fitting etc including CI/Pressed steel terminals, switch box, and making good the disturbed surface of wall/floor etc, to match with the existing surfaces of wall/floor complete all as specified and directed. Note :- If the contractor fail to make good the disturbed surface of wall/floor etc and do not match with the existing surface of wall/floor to the entire satisfaction of Engr-in-Charge a recovery @ of Rs. 50/- per RM will be made from payment due to the Contractor. In case of any dispute the decision of accepting officer will be final and binding.
Dismantling and taking down u/s sub-main wiring/service wire of any size including wooden batten / PVC Conduit etc and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified & as directed. Note :- If the contractor fail to make good the disturbed surface of wall/floor etc and do not match with the existing surface of wall/floor to the entire satisfaction of Engr-in-Charge a recovery @ of Rs. 50/- per RM will be made from payment due to the Contractor. In case of any dispute the decision of accepting officer will be final and binding.
M & L for cutting of old unserviceble AHU duct and removing from roof approx 25 m of off sizes using proper cutter tool safely including making good the disturbed surface & disposed out being sch of credit complete all as specified and directed.
Dismantling and taking down safely serviceble smoke detactor including 1.5 Sqmm FRLS copper serviceble wire with PVC Conduit etc and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified & as directed. Note :- If the contractor fail to make good the disturbed surface of wall/floor etc and do not match with the existing surface of wall/floor to the entire satisfaction of Engr-in-Charge a recovery @ of Rs. 50/- per RM will be made from payment due to the Contractor. In case of any dispute the decision of accepting officer will be final and binding.
Dismantling and taking down old damaged existing DB’s any type and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified
Material & Labour for Point Wiring for one light Point/one fan point/ one call bell point, controlled by one switch with 1100 volts grade single core conforming to (IS:694 /1990) PVC insulated unsheathed 1.5 sqmm multi stranded copper conductor cable (FRLSH) with contineous earth wire of 1.5 Sqmm stranded copper conductor cable (FRLSH) PVC insulated unsheathed , drawn in and including concealed PVC conduit ,duly concealed to wall/floor or above false ceiling with fittings(ISI marked) not less than 20 mm dia (Color coding of wires shall be Phase, neutral and earth wire all as specified ) sunk Metal flush box with and incl decorative polycarbonate frame for housing Modular Switches, sockets , fan regulators etc including white cover cover plate complete all as specified and directed. Note:- i) Cost of cutting chases of suitable girth where required on brick /concrete surface and making good disturbed surface shall be deemed to be included in quoted rates ii) If the contractor fail to make good the disturbed surface of wall/floor etc and do not match with the existing surface of wall/floor to the entire satisfaction of Engr-in-Charge a recovery @ of Rs. 50/- per RM will be made from payment due to the Contractor. In case of any dispute the decision of accepting officer will be final and binding.
One 3pin/5pin 5/6 Amps socket out let on same board with other switches , with cables 1.5 sq mm size , complete all as specified and directed.
One 3pin/5pin 5/6 Amps socket out let on independent board with other switches, with cables 1.5 sq mm size, complete all as specified and directed .
All as per item No 31 above but with 2.5 Sqmm PVC insulated FRLSH cable for 15 Amps power point.
S & F Switch Modular single pole, one way 6 Amps, 1 module 240 Volts AC all as specified and directed by Engr- in-charge. Make Legrand Cat No- 673401, Indo Asian Cat No-800000, Cona cat No-9251
Supply and fixing switch modular , one-way 16Amps, 1 module 240 Volts AC all as specified and directed by Engr- in-charge. Make Legrand Cat No- 673411, Indo Asian Cat No-800002, Cona cat No-9386
Supply and fixing modular socket, 6A -2/3 pin combined 2 module ISI marked 230 volts, 50 Hz all as specified and directed by Engr- in-charge. Make Legrand Cat No- 673452, Indo Asian Cat No-800020, Cona cat No-9316
Supply and fixing modular socket, 6A/16A -2/3 pin combined 2 module 230 volts 50 hz all as specified and directed by Engr- in-charge. Make Legrand Cat No- 673455, Indo Asian Cat No-800022, Cona cat No-9416
Supply and fixing ceiling rose surface bakelite 65x25mm dia having three terminals ISI marked all as specified Cat Part No HSN8536/39072 of Anchor, HSN 8536/2116 of Cona or equivalent in havells.
Supply and fixing LED luminaire 600mm X 600mm, 35/36 watt, 220V AC recessed type with high efficiency PMMA diffuser soft glair free light complete with driver, suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed Make Shakti Cat Part No. SZRSMO36/ Havells/Crompton Cat Part NO.LCTLSNE-36-10-CDL./WIPRO CAT PAR
Supply and fixing sheet metal enclosure double door type for MCBs DB SPN(Single pole and neutral) 240V AC 8 way with 200 Amps rated bus bar all as specified and directed .
Supply and fixing sheet metal enclosure double door type for MCCB DB VTPN 4 Way with 160 Amps , 25KA, 4 Pole MCCB all as specified and as directed.
Supply and fixing MCB SPN 40 Amp 240 V AC 10 KA repturing capacity all as specified.
Supply and fixing MCB SP 5 to 30 Amp 'B' series 10 KA repturing capacity complete all as specified
Supply and fixing MCB SP 40 Amp 'B' series 10 KA repturing capacity complete all as specified.
Supply and fixing single pole and neutral enclosure with a two pole and earth plug socket complete with 01 No, RCCB 25 Amp, 30 mili amps, DP, 240 Volts, AC Complete all as specified. Make - Legrand, ABB, Schnider. (Note - Cost of cutting chases for enclosure concealed in wall of suitable girth where required on brick /concrete surface and making good disturbed surface shall be deemed to be included in quoted rates
Supply and fixing sub main wiring two single core 4 sq mm PVC insulated unsheathed multi stranded copper conductor cable ( FRLSH ) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade surface/ concealed in wall as per existing along with 4.00 Sq mm PVC insulated unsheathed copper conductor cable (FRLSH ) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion all as specified and as directed Note:- Two runs of multi stranded copper conductor cable and one run of earth wire including PVC conduit will be measured as a one length.
Supply and fix wall mounted fan 400 mm sweep 230 volts single phase PVC body with BEE 5 star rated having suitable arrangements for fixing on wall complete all as specified and directed.
Disconnecting electric connection & taking down ceiling fans of any sweep & dipositing in MES store complete
Supply, installation, commissioning, executing & testing complete maintenance free chemical earthing system and soil resistivity check before preparing earth pit and result should be below one ohm as specified below including testing complete all as specified and directed & as per satisfaction of Engr-in-Charge Make: Elmech's Cat No: ASEEL-39-ZC&AC or equivalent and approved make . Earthing Electrode : Supply & Installation of Advance encapsulated compound based CPRI tested maintenance free, pipe-in-pipe technology upgraded (Zinc & Alloy Coated),ZINC COATED(80-100) microns with pure Zinc (99.9%) & ALLOY COATING (200-250) microns. Earthing System confirming IS 3034.The outer and inner pipe should be 76.2 mm & 41.9 mm dia,3000 mm Length, Zinc coated with additional special Alloy coating 300mm on the topside for additional corrosion protection of the terminal. The annular space between the pipes being filled up with COMPACT FILL (CF) (Crystalline Conductive Compound). The COMPACT FILL (CF) mixture which is machine pressed in the pipes should not disintegrate or collapse when outer pipe corrodes.The inner pipe should be extended with terminals for connectivity. Infill Compound (chemical) : Minimum 100 Kgs (4 bags each 25 kgs) conductolite BFC, constituting natural elements, not water dissolve, reduces soil resistivity, highly hygroscopic and swells, high conductivity and anti corrosive, retains moisture for a long time. Earth Work : Vertical excavation in any type of soil upto a depth of 3000 mm, the diameter of the bore hole being minimum 250mm. Installation: Filling the bottom 300 mm of the bore with infill compound (chemical), vertically placing the electrode in the centre of the pit, fill the cavity around the electrode with chemical, ensuring there are no air gaps in the chemical filled cavity region, make a thick paste by pouring water into the earth pit and mixing the mixture with a pole. (Note Unit rates shall be deemed to be included the following :- (i) 07 RM Earth strip of size 32X6 mm along with Low density poly ethylene pipes (LDPE) of size 40mm with pressure rating 6Kg/cm2 for protection of GI / copper strip for connection from earthing to earth test point. (ii) Earth pit chamber of size 300x300x300mm (internal dimension) will be prepared & complete all as specified & directed. (ii) Earth pit chamber of size 300x300x300mm (internal dimension) will be prepared & complete all as specified & directed.
M & L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for earthing etc as required with25X3 mm copper strip complete all as specified and directed. Note: copper strip shall be fixed on ceramic /PVC insulator at a distance of 45 cm apart.
M & L Test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hex. head screw complete all as specified and as directed
Refixing serviceble smoke detactor removing from above item No 29, including PVC Conduit and copper wire 1.5 Sqmm & PVC coduit etc and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified & as directed. Note :- If the contractor fail to make good the disturbed surface of wall/floor etc and do not match with the existing surface of wall/floor to the entire satisfaction of Engr-in-Charge a recovery @ of Rs. 50/- per RM will be made from payment due to the Contractor. In case of any dispute the decision of accepting officer will be final and binding.
Fixing and installation wall split unit Air conditioners inverter type including fixing of MS stand complete all as directed by Engr-in -Charge. Note AC shall be issued under Sch B .
S&F copper pipe with insulation of size 5/8" for Split AC complete all as specified.
S&F copper pipe with insulation of size 3/8" for Split AC complete all as specified.
S& F PVC drain pipe of size 25/32 mm dia including fasteners to fix on wall complete all as specified.
Sanjeev Sehgal Contractor
Bharat Construction Company
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .