SETTING UP OF INTEGRATED HANDLOOM VILLAGE AT CHENNAMANGALAM ERNAKULAM- (PHASE II WORKS)-CIVIL WORKS

Amount

Civil Works

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15⁰ landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

50.6.1.4 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

13.48.3 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

8.31 : Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

11.37 : Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

STRUCTURAL STEEL WORKS

10.25.2 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

od190186/2022_2023 : Supply & fixing wall and partition wall sheet- 0.47mm polyester coated aluzinc flat panel with 40mm Poly urathene (Density- 40 Kg/m3) with 0.47mm pre-painted aluzinc liner sheet- Gross area including all accessories like screws, (galvanised bolt and nut grade 8.8,washers etc. if any) complete.Wall sheet & Partition wall 0.47mm PPAZ+ 40mm PU+ 0.47mm PPAZ liner

od197065/2022_2023 : Supply & fixing of 0.40mm mat finish screwless sheet for inside of outer wall & partition walls upto 2.10m height- Gross area<br>Design wall sheet 0.40mm mat finish with all accessories complete.

od190187/2022_2023 : Supply & fixing of roof sheet- 0.50mm polyester coated aluzinc with minimum 40mm Poly urathene (Density- 40Kg/m3) with 0.40mm pre-painted aluzinc liner sheet with all accessories like screws, (galvanised bolt and nut grade 8.8,washers etc. if any )complete.Roof sheet 0.50mm PPAZ 150+ 40mm PU+ 0.40mm PPAZ

od196618/2022_2023 : Providing and fixing polyester coated aluzinc sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, with minimum 40mm Poly urathene (Density- 40Kg/m3) with 0.40mm pre-painted aluzinc liner sheet using self drilling/self tapping screws complete:<br>Gutter (610 mm over all girth)

od196619/2022_2023 : Providing and fixing polyester coated aluzinc sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, with minimum 40mm Poly urathene (Density- 40Kg/m3) with 0.40mm pre-painted aluzinc liner sheet using self drilling/self tapping screws complete:<br>flashings 0.50mm Pre-painted aluzinc 150 (Upto girth 610mm)

21.18 : Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately)

21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

21.3.1 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness

21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

9.117.1 : Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer-in-chargeExtruded section profile size 48x40 mm

9.118.1 : Providing and fixing to existing door frames24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness,fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge( For W.C. and bathroom door shutter).

Toilet Block and Watchman's Cabin- Plumbing Works

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with S Trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C pan with ISI marked white solid plastic seat and lid

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fitting

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with angle valve, standard size C.P. flexible hose, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required

Providing and Fixing at site CP Brass Angle Cock with Wall Flange including Wall cutting and making good complete as required.

Supply & fixing and testing of C.P. Health faucet with flexible hose and hook etc. complete as required.

Supply & fixing Brass cover over Urinal trap with matching size including fitting accessories.

Providing and fixing C.P. brass pillar cock of approved quality conforming to IS:8931

Providing and Fixing at site 100x100mm CP Brass or Stainless Steel Gratings with Cockroach Protection for matching the multi floor trap

Supply & fixing at site uPVC multi inlet trap and outlet connections to pipes using solvent cement complete as required for floor drains Multi Inlet 75/50mm Diameter 200mm Depth .

Supplying, Installing & Testing at site in position uPVC pipe (SWR) of Type B (IS:13592) including SWR solvent type (pasted) fittings where required & clamping with Universal clamps, Anchor fastners(8mm), Threaded Rod (8mm), nuts, washers etc complete. and jointing with adhesive approved by manufactures including cutting and making good the walls and floors or surface mounted with clamps as required at site (For Soil & waste pipes -Toilet Inside)50mm OD 6Kg/Sq.cm

75mm OD 6Kg/Sq.cm

110mm OD 6Kg/Sq.cm

160mm OD 6Kg/Sq.cm

Waste piping:50mm OD 6Kg/Sq.cm

75mm OD 6Kg/Sq.cm

110mm OD 6Kg/Sq.cm

Supplying, Installing & Testing at site in position uPVC pipe(SWR) of Type B(IS:13592) including SWR fittings with bosses where required eg.tees, bends, clamps, couplings and adapters and cowls with sealing grooves and clamping with Position & jointing with 'O' rings including cutting and making good the walls and floors as required at site(For Vertical & Horizontal Shaft piping).Rain water piping(shaft):110mm OD 6Kg/Sq.cm

Supplying, Installing, Testing & Commissioning of pipes and conveying to position; and jointing to true lines and gradients, uPVC SWR pipe of IS 4985(6kg/cm2), jointing the pipe line as per specification, testing the pipe line after installation to the specified hydrostatic test pressure including installing specials like bends, couplers, sockets, connections etc. as per provisions of IS: 17421983 (Code of practice for building drainage) complete including supply of all materials excavation, refilling the earth or cutting of wall and making good the same complete wherever required :160mm OD 6KG/Sq.cm Soil/Waste/Rain Piping

Supply and laying at Site ASTM Schedule 40 Pipes of Equivalent Standard Size for Water supply Joined using Solvent Cement with fittings, suitable for the working pressure. Supporting exposed pipes using necessary G.I Clamps and supports.Concealed pipes including cutting and making good walls, floors etc. where ever required complete.20mm Nominal Dia (10 kg)

25mm Nominal Dia (10 Kg)

Supplying, Installing & Testing at site in position uPVC unthreaded pipes (As per ASTM D - 1785 ,Sch.40) of approved make for water supply, complete with all necessary Fittings (elbows, unions, tees, reducers, couplings, nipples etc.) complete with clamping in position with G.I. "U" bolts (8 mm thick) on G.I. slotted rails (1.6 mm thick) , Rail legs (2.5 mm thick) of approved make, as per drawings to the satisfaction of the Engineer-in-Charge.32mm Nominal Dia (10 Kg)

32mm Pumping Line Dia (10 Kg)

Supplying & Laying of uPVC unthreaded pipes (As per ASTM D - 1785 ,Sch.40) of approved make for water supply, complete with all necessary Fittings (elbows, unions, tees, reducers, couplings, nipples etc.) wherever necessary, and conveying to position, cleaning, laying and jointing to true lines and gradients, ,jointing the pipe line as per specification, testing the pipe line after installation to the specified hydrostatic test pressure etc. complete 32mm Nominal Dia ( 10 kg)

Supply and Fixing Following Brass Valves using necessary Adapters PVC flanges, gaskets, nuts etc complete as required for the Valve Mounting and Supply & Installation 32mm Dia Ball Valve

50mm Dia Ball Valve

Supply and fixing C.I. Butterfly valve (Body : Grey Cast Iron, shaft : SS, Disc : SG Iron (nickel plated coated) of approved make with union / flange, washer, nuts & bolts. Rated to temperature of 85 Deg C and PN 10/16 pressure rating including nitrile rubber insulation with proprietary fire proof protective coating against mechanical damage as per manufacturer’s specification (GI boxing to be provided).100mm Dia Butterfly Valve

Supplying, installation, Testing & Commissioning of Sintex SMC panel water tank of capacity of about 1000 lts with water tank level sensor

Supplying,Testing & Commissioning of Rain Water Tank of Ferro cement tank wall thick 5 cm using 6 mm rod 20 cm c/c both ways, chicken mesh 2 layer ( 2,000 Ltr) including corresponding excavation and other earth works

Supplying, Testing & Commisioning of Ferrocement Soak Pit of Dia 2 mtr and height 1 m thickness 2.5 cm with RCC Cover (1000 L ) including corresponding excavation and other earth works

Supplying, Testing & Commisioning of Ferrocement Waste Pit of Dia 2 mtr and height 1.5 m thickness 2.5 cm (1000 L) including corresponding excavation and other earth works

Constructing brick masonry manholes with 75 class designation bricks in cement mortar 1:5 (1 cement :5 coarse sand) inside and outside cement plaster 12mm thick with cement mortar 1:3 (1 cement:3 coarse sand) inside with a floating coat of neat cement, 15cm thick RCC top slab 1:2:4 mix (1 cement :2 coarse sand: 4graded stone aggregate 20mm nominal size) for fixing manhole frame, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand:8 graded stone aggregate 40mm nominal size) and making channels in cement concrete 1:2:4 mize (1 cement:2coarse sand:4 graded stone aggregate 20mm nominal size) including excavation back filling and disposal of surplus earth finished as per standard design etc. (Including cost of all materials) 45x45cms (inside) and 0.6m (average) deep using RCC manhole cover conforming to the latest relevant IS specifications, of the brand as approved by the Project Manager.

Supply and erection of Polyethylene septic tanks as per ASTM standards including corresponding excavation and other erath works1200 Ltr

Installing, Testing & Commissioning at site in position multi stage vertical/ horizontal submersible pump with necessary unions, flanges, foundation bolts etc. with suitable lifing arrangements for maintainance complete 1.0 to 2.5 HP

Exhibition and Sale Centre- Plumbing Works

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with S Trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C pan with ISI marked white solid plastic seat and lid

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fitting

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with angle valve, standard size C.P. flexible hose, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required

Providing and Fixing at site CP Brass Angle Cock with Wall Flange including Wall cutting and making good complete as required.

Supply & fixing and testing of C.P. Health faucet with flexible hose and hook etc. complete as required.

Supply & fixing Brass cover over Urinal trap with matching size including fitting accessories.

Providing and fixing C.P. brass pillar cock of approved quality conforming to IS:8931

Providing and Fixing at site 100x100mm CP Brass or Stainless Steel Gratings with Cockroach Protection for matching the multi floor trap

Supply & fixing at site uPVC multi inlet trap and outlet connections to pipes using solvent cement complete as required for floor drains Multi Inlet 75/50mm Diameter 200mm Depth .

Supplying, Installing & Testing at site in position uPVC pipe (SWR) of Type B (IS:13592) including SWR solvent type (pasted) fittings where required & clamping with Universal clamps, Anchor fastners(8mm), Threaded Rod (8mm), nuts, washers etc complete. and jointing with adhesive approved by manufactures including cutting and making good the walls and floors or surface mounted with clamps as required at site (For Soil & waste pipes -Toilet Inside)50mm OD 6Kg/Sq.cm

75mm OD 6Kg/Sq.cm

110mm OD 6Kg/Sq.cm

160mm OD 6Kg/Sq.cm

Waste piping:50mm OD 6Kg/Sq.cm

75mm OD 6Kg/Sq.cm

110mm OD 6Kg/Sq.cm

Supplying, Installing & Testing at site in position uPVC pipe(SWR) of Type B(IS:13592) including SWR fittings with bosses where required eg.tees, bends, clamps, couplings and adapters and cowls with sealing grooves and clamping with Position & jointing with 'O' rings including cutting and making good the walls and floors as required at site(For Vertical & Horizontal Shaft piping).Rain water piping(shaft):110mm OD 6Kg/Sq.cm

Supplying, Installing, Testing & Commissioning of pipes and conveying to position; and jointing to true lines and gradients, uPVC SWR pipe of IS 4985(6kg/cm2), jointing the pipe line as per specification, testing the pipe line after installation to the specified hydrostatic test pressure including installing specials like bends, couplers, sockets, connections etc. as per provisions of IS: 17421983 (Code of practice for building drainage) complete including supply of all materials excavation, refilling the earth or cutting of wall and making good the same complete wherever required :160mm OD 6KG/Sq.cm Soil/Waste/Rain Piping

Supply and laying at Site ASTM Schedule 40 Pipes of Equivalent Standard Size for Water supply Joined using Solvent Cement with fittings, suitable for the working pressure. Supporting exposed pipes using necessary G.I Clamps and supports.Concealed pipes including cutting and making good walls, floors etc. where ever required complete.20mm Nominal Dia (10 kg)

25mm Nominal Dia (10 Kg)

Supplying, Installing & Testing at site in position uPVC unthreaded pipes (As per ASTM D - 1785 ,Sch.40) of approved make for water supply, complete with all necessary Fittings (elbows, unions, tees, reducers, couplings, nipples etc.) complete with clamping in position with G.I. "U" bolts (8 mm thick) on G.I. slotted rails (1.6 mm thick) , Rail legs (2.5 mm thick) of approved make, as per drawings to the satisfaction of the Engineer-in-Charge.32mm Nominal Dia (10 Kg)

32mm Pumping Line Dia (10 Kg)

Supplying & Laying of uPVC unthreaded pipes (As per ASTM D - 1785 ,Sch.40) of approved make for water supply, complete with all necessary Fittings (elbows, unions, tees, reducers, couplings, nipples etc.) wherever necessary, and conveying to position, cleaning, laying and jointing to true lines and gradients, ,jointing the pipe line as per specification, testing the pipe line after installation to the specified hydrostatic test pressure etc. complete 32mm Nominal Dia ( 10 kg)

Supply and Fixing Following Brass Valves using necessary Adapters PVC flanges, gaskets, nuts etc complete as required for the Valve Mounting and Supply & Installation 32mm Dia Ball Valve

50mm Dia Ball Valve

Supply and fixing C.I. Butterfly valve (Body : Grey Cast Iron, shaft : SS, Disc : SG Iron (nickel plated coated) of approved make with union / flange, washer, nuts & bolts. Rated to temperature of 85 Deg C and PN 10/16 pressure rating including nitrile rubber insulation with proprietary fire proof protective coating against mechanical damage as per manufacturer’s specification (GI boxing to be provided).100mm Dia Butterfly Valve

Supplying, installation, Testing & Commissioning of Sintex SMC panel water tank of capacity of about 1000 lts with water tank level sensor

Supplying,Testing & Commissioning of Rain Water Tank of Ferro cement tank wall thick 5 cm using 6 mm rod 20 cm c/c both ways, chicken mesh 2 layer ( 2,000 Ltr) including corresponding excavation and other earth works

Supplying, Testing & Commisioning of Ferrocement Soak Pit of Dia 2 mtr and height 1 m thickness 2.5 cm with RCC Cover (1000 L ) including corresponding excavation and other earth works

Supplying, Testing & Commisioning of Ferrocement Waste Pit of Dia 2 mtr and height 1.5 m thickness 2.5 cm (1000 L) including corresponding excavation and other earth works

Constructing brick masonry manholes with 75 class designation bricks in cement mortar 1:5 (1 cement :5 coarse sand) inside and outside cement plaster 12mm thick with cement mortar 1:3 (1 cement:3 coarse sand) inside with a floating coat of neat cement, 15cm thick RCC top slab 1:2:4 mix (1 cement :2 coarse sand: 4graded stone aggregate 20mm nominal size) for fixing manhole frame, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand:8 graded stone aggregate 40mm nominal size) and making channels in cement concrete 1:2:4 mize (1 cement:2coarse sand:4 graded stone aggregate 20mm nominal size) including excavation back filling and disposal of surplus earth finished as per standard design etc. (Including cost of all materials) 45x45cms (inside) and 0.6m (average) deep using RCC manhole cover conforming to the latest relevant IS specifications, of the brand as approved by the Project Manager.

Supply and erection of Polyethylene septic tanks as per ASTM standards including corresponding excavation and other erath works1200 Ltr

Installing, Testing & Commissioning at site in position multi stage vertical/ horizontal submersible pump with necessary unions, flanges, foundation bolts etc. with suitable lifing arrangements for maintainance complete 1.0 to 2.5 HP

Design centre- Electrical Works

Light Points: Supply and Installing 20mm ISI grade rigid PVC conduit open on Steel structure ceiling with all accessories(Conduit drops in walls to be concealed) and carrying out wiring using 1.5 sq mm PVC insulated FRLS single core copper conductor wires, for phase& neutral along with 1 sq.mm PVC insulated FRLS single core copper conductor wire for earth, 5A modular type switches, MS box front plate, testing and commissioning.(Maximum distance to every secondary point is 5meter.)

One light point controlled by one No. 6A SP switch.

Two light points controlled by one No. 6A SP switch.

Three light points controlled by one No. 6A SP switch.

Four light points controlled by one No. 6A SP switch.

Six light points controlled by one No. 6A SP switch.

LED strip light point controlled by one No. 6A SP switch

Fan points: Supply and Installing 20mm ISI grade rigid PVC conduit and SS hook open on Steel structure ceiling with all accessories (Conduit drops in walls to be concealed) and carrying out wiring using 1.5 sq mm PVC insulated FRLS single core copper conductor wires, for phase& neutral along with 1 sq.mm PVC insulated FRLS single core copper conductor wire for earth, 5A modular type switches, MS box front plate, Electronic step type regulator, testing and commissioning.

RJ45 SOCKET – INTERNET:Supply and Installation of modular type RJ45 socket fixing on concealed MS box, testing and commissioning.

RJ11 SOCKET-TELEPHONE : Supply and Installation of RJ11 telephone socket fixing on concealed MS box, testing and commissioning..

Supply and Installation of 3pin 6A modular socket outlet concealed in wall controlled by one No. 6A SP modular switch at combined position including MS module box , Front plate, Cover plate and switch, Testing and commissioning.

Supply and Installation of 3pin 6A modular socket outlet concealed in wall controlled by one No. 6A SP modular switch at independent position including MS module box , Front plate, Cover plate and switch, Testing and commissioning.

Supply and Installation of 3pin 16/6A modular socket outlet concealed in wall controlled by one No. 16A SP modular switch at combined position including MS module box , Front plate, Cover plate and switch, Testing and commissioning.

Supply and Installation of 3pin 16/6A modular socket outlet on steel column, controlled by one No. 16A SP modular switch at independent position including PVC module box , Front plate, Cover plate and switch, Testing and commissioning.

Supply and Installation of 3pin 20/16A modular socket outlet concealed in wall controlled by one No. 20A SP modular switch at combined position including MS module box , Front plate, Cover plate and switch, Testing and commissioning.

Supply and Installation of 3pin 32A modular socket outlet concealed in wall controlled by one No. 32A SP modular switch at independent position including MS module box , Front plate, Cover plate and switch, Testing and commissioning.

Supply and Installing 20mm ISI grade rigid PVC Conduit open on steel structure ceiling with all accessories.

Supply and Carrying out circuit main wiring from DB using 1.5 sq.mm PVC insulated stranded FRLS single core copper conductor wires for phase & neutral along with 1.0sq.mm PVC insulated FRLS single core copper conductor wire for earth, testing and commissioning.

Supply and Carrying out circuit main wiring from DB using 2.5 sq.mm PVC insulated stranded FRLS single core copper conductor wires for phase & neutral along with 1.5sq.mm PVC insulated FRLS single core copper conductor wire for earth, testing and commissioning.

Supply and Carrying out circuit main wiring from DB using 4.0 sq.mm PVC insulated stranded FRLS single core copper conductor wires for phase & neutral along with 2.5sq.mm PVC insulated FRLS single core copper conductor wire for earth, testing and commissioning.

DESIGN CENTRE VDB : Supply, Installation, testing and commissioning of wall mounted type double door dust tight and vermin proof 12 way TPN Vertical DB consists of the following breakers, termination of circuits, testing and commissioning: Incoming: 63A 4Pole MCB Isolator + 63A 30mA 4P ELCB- 1No. Outgoing: 6A SP MCB C Curve - 8 Nos. 16A SP MCB C Curve - 6 Nos. 20A SP MCB C Curve - 6 Nos. 25A SP MCB D Curve - 4 Nos.

Supply, Installation, testing and commissioning of 20 W LED wall Mounted tube Light complete with control gear and lamp.

Supply, Installation, testing and commissioning of 7W LED Spike Light.

Supply, Installation, testing and commissioning of 3W LED spot light

Supply, Installation, testing and commissioning of 5watt LED strip including DC drive.

Supply,Installation, testing and commissioning of 1200mm sweep Ceiling fan with 2 feet rod.

Supply, Installation, Testing and Commissioning of the following 4 star inverter split AC units including cost of all materials, labour, machinery, tools and tackles, scaffolding, loading charges, unloading charges, transportation, lead, lift, taxes, rehandling, rentals etc. complete as per the specifications and directions of the Site In Charge.

DG SETs: Installation, testing and commissioning of DG sets complete with fuel tank, residential silencer , anti vibration pad, fuel piping and acoustic enclosure as per CPCB2 regulation, Standard control panel, all meters and neutral CT and std by E/F relay.

20 kva DG set

EXHAUST PIPING : Supply & Laying of 1 run MS pipes of following diameter for exhaust line of DG sets with all accessories like flanges, brackets,gaskets and nut & bolts etc including painting with 2 coats of enamel paint and primer

100mm diameter

PIPE EARTHING: Supply, Installing, testing and commissioning of 2 Mtr. long 50 mm GI pipe earth electrode buried in ground with alternate layer of charcoal and salt including construction of trough with RCC cover as per IS 3043.

Supply, Laying, fixing of the earthing conductor of the following sizes including excavation of trenches, drilling holes, soldering, jointing etc. complete as required.

25 x 3 mm Cu. Strip.

No. 10SWG. Copper

No. 8SWG. Copper

No. 6SWG. Copper

Preparation, submission of drawings, Testing of LT TOD Energy Meter & CTs and arranging Inspection for obtaining sanction for power allocation from Kerala State Electricity Board. (Including all incidental charges and excluding all statutory charges).

Exhibition and Sale Centre- Electrical Works

Light Points: Supply and Installing 20mm ISI grade rigid PVC conduit open on Steel structure ceiling with all accessories(Conduit drops in walls to be concealed) and carrying out wiring using 1.5 sq mm PVC insulated FRLS single core copper conductor wires, for phase& neutral along with 1 sq.mm PVC insulated FRLS single core copper conductor wire for earth, 5A modular type switches, MS box front plate, testing and commissioning.(Maximum distance to every secondary point is 5meter.)

One light point controlled by one No. 6A SP switch.

Two light points controlled by one No. 6A SP switch.

Three light points controlled by one No. 6A SP switch.

Four light points controlled by one No. 6A SP switch.

Six light points controlled by one No. 6A SP switch.

LED strip light point controlled by one No. 6A SP switch

Fan points: Supply and Installing 20mm ISI grade rigid PVC conduit and SS hook open on Steel structure ceiling with all accessories (Conduit drops in walls to be concealed) and carrying out wiring using 1.5 sq mm PVC insulated FRLS single core copper conductor wires, for phase& neutral along with 1 sq.mm PVC insulated FRLS single core copper conductor wire for earth, 5A modular type switches, MS box front plate, Electronic step type regulator, testing and commissioning.

RJ45 SOCKET – INTERNET:Supply and Installation of modular type RJ45 socket fixing on concealed MS box, testing and commissioning.

RJ11 SOCKET-TELEPHONE : Supply and Installation of RJ11 telephone socket fixing on concealed MS box, testing and commissioning..

Supply and Installation of 3pin 6A modular socket outlet concealed in wall controlled by one No. 6A SP modular switch at combined position including MS module box , Front plate, Cover plate and switch, Testing and commissioning.

Supply and Installation of 3pin 6A modular socket outlet concealed in wall controlled by one No. 6A SP modular switch at independent position including MS module box , Front plate, Cover plate and switch, Testing and commissioning.

Supply and Installation of 3pin 16/6A modular socket outlet concealed in wall controlled by one No. 16A SP modular switch at combined position including MS module box , Front plate, Cover plate and switch, Testing and commissioning.

Supply and Installation of 3pin 16/6A modular socket outlet on steel column, controlled by one No. 16A SP modular switch at independent position including PVC module box , Front plate, Cover plate and switch, Testing and commissioning.

Supply and Installation of 3pin 20/16A modular socket outlet concealed in wall controlled by one No. 20A SP modular switch at combined position including MS module box , Front plate, Cover plate and switch, Testing and commissioning.

Supply and Installing 20mm ISI grade rigid PVC Conduit open on steel structure ceiling with all accessories.

Supply and Carrying out circuit main wiring from DB using 1.5 sq.mm PVC insulated stranded FRLS single core copper conductor wires for phase & neutral along with 1.0sq.mm PVC insulated FRLS single core copper conductor wire for earth, testing and commissioning.

Supply and Carrying out circuit main wiring from DB using 2.5 sq.mm PVC insulated stranded FRLS single core copper conductor wires for phase & neutral along with 1.5sq.mm PVC insulated FRLS single core copper conductor wire for earth, testing and commissioning.

Supply and Carrying out circuit main wiring from DB using 4.0 sq.mm PVC insulated stranded FRLS single core copper conductor wires for phase & neutral along with 2.5sq.mm PVC insulated FRLS single core copper conductor wire for earth, testing and commissioning.

EXHIBITION CENTRER VDB : Supply, Installation, testing and commissioning of wall mounted type double door dust tight and vermin proof 12 way TPN Vertical DB consists of the following breakers, termination of circuits, testing and commissioning: Incoming: 63A 4Pole MCB Isolator + 63A 30mA 4P ELCB- 1No. Outgoing: 6A SP MCB C Curve - 8 Nos. 16A SP MCB C Curve - 6 Nos. 20A SP MCB C Curve - 6 Nos. 25A SP MCB D Curve - 4 Nos.

Supply, Installation, testing and commissioning of 20 W LED wall Mounted tube Light complete with control gear and lamp.

Supply, Installation, testing and commissioning of 7W LED Spike Light.

Supply, Installation, testing and commissioning of 3W LED spot light

Supply, Installation, testing and commissioning of 5watt LED strip including DC drive.

Supply,Installation, testing and commissioning of 1200mm sweep Ceiling fan with 2 feet rod.

Supply, Installation, Testing and Commissioning of the following 4 star inverter split AC units including cost of all materials, labour, machinery, tools and tackles, scaffolding, loading charges, unloading charges, transportation, lead, lift, taxes, rehandling, rentals etc. complete as per the specifications and directions of the Site In Charge.

PIPE EARTHING: Supply, Installing, testing and commissioning of 2 Mtr. long 50 mm GI pipe earth electrode buried in ground with alternate layer of charcoal and salt including construction of trough with RCC cover as per IS 3043.

Supply, Laying, fixing of the earthing conductor of the following sizes including excavation of trenches, drilling holes, soldering, jointing etc. complete as required.

No. 10SWG. Copper

No. 8SWG. Copper

No. 6SWG. Copper

Preparation, submission of drawings, Testing of LT TOD Energy Meter & CTs and arranging Inspection for obtaining sanction for power allocation from Kerala State Electricity Board. (Including all incidental charges and excluding all statutory charges).

Production and Demonstration centre- Electrical Works

Light Points: Supply and Installing 20mm ISI grade rigid PVC conduit open on Steel structure ceiling with all accessories(Conduit drops in walls to be concealed) and carrying out wiring using 1.5 sq mm PVC insulated FRLS single core copper conductor wires, for phase& neutral along with 1 sq.mm PVC insulated FRLS single core copper conductor wire for earth, 5A modular type switches, MS box front plate, testing and commissioning.(Maximum distance to every secondary point is 5meter.)

One light point controlled by one No. 6A SP switch.

Two light points controlled by one No. 6A SP switch.

Three light points controlled by one No. 6A SP switch.

Four light points controlled by one No. 6A SP switch.

Six light points controlled by one No. 6A SP switch.

LED strip light point controlled by one No. 6A SP switch

Fan points: Supply and Installing 20mm ISI grade rigid PVC conduit and SS hook open on Steel structure ceiling with all accessories (Conduit drops in walls to be concealed) and carrying out wiring using 1.5 sq mm PVC insulated FRLS single core copper conductor wires, for phase& neutral along with 1 sq.mm PVC insulated FRLS single core copper conductor wire for earth, 5A modular type switches, MS box front plate, Electronic step type regulator, testing and commissioning.

RJ45 SOCKET – INTERNET:Supply and Installation of modular type RJ45 socket fixing on concealed MS box, testing and commissioning.

RJ11 SOCKET-TELEPHONE : Supply and Installation of RJ11 telephone socket fixing on concealed MS box, testing and commissioning..

Supply and Installation of 3pin 6A modular socket outlet concealed in wall controlled by one No. 6A SP modular switch at combined position including MS module box , Front plate, Cover plate and switch, Testing and commissioning.

Supply and Installation of 3pin 6A modular socket outlet concealed in wall controlled by one No. 6A SP modular switch at independent position including MS module box , Front plate, Cover plate and switch, Testing and commissioning.

Supply and Installation of 3pin 16/6A modular socket outlet concealed in wall controlled by one No. 16A SP modular switch at combined position including MS module box , Front plate, Cover plate and switch, Testing and commissioning.

Supply and Installation of 3pin 16/6A modular socket outlet on steel column, controlled by one No. 16A SP modular switch at independent position including PVC module box , Front plate, Cover plate and switch, Testing and commissioning.

Supply and Installation of 3pin 20/16A modular socket outlet concealed in wall controlled by one No. 20A SP modular switch at combined position including MS module box , Front plate, Cover plate and switch, Testing and commissioning.

Supply and Installation of 3pin 32A modular socket outlet concealed in wall controlled by one No. 32A SP modular switch at independent position including MS module box , Front plate, Cover plate and switch, Testing and commissioning.

Supply and Installing 20mm ISI grade rigid PVC Conduit open on steel structure ceiling with all accessories.

Supply and Carrying out circuit main wiring from DB using 1.5 sq.mm PVC insulated stranded FRLS single core copper conductor wires for phase & neutral along with 1.0sq.mm PVC insulated FRLS single core copper conductor wire for earth, testing and commissioning.

Supply and Carrying out circuit main wiring from DB using 2.5 sq.mm PVC insulated stranded FRLS single core copper conductor wires for phase & neutral along with 1.5sq.mm PVC insulated FRLS single core copper conductor wire for earth, testing and commissioning.

Supply and Carrying out circuit main wiring from DB using 4.0 sq.mm PVC insulated stranded FRLS single core copper conductor wires for phase & neutral along with 2.5sq.mm PVC insulated FRLS single core copper conductor wire for earth, testing and commissioning.

DESIGN CENTRE LDB : Supply, Installation, testing and commissioning of wall mounted type double door dust tight and vermin proof 6 way TPN Horizontal DB consists of the following breakers, termination of circuits, testing and commissioning: Incoming: 40A 4Pole MCB Isolator + 40A 30mA 4P ELCB- 1No. Outgoing: 6A /16A SP MCB C Curve - 18 Nos.

DESIGN CENTRE LDB : Supply, Installation, testing and commissioning of wall mounted type double door dust tight and vermin proof 8 way TPN Horizontal DB consists of the following breakers, termination of circuits, testing and commissioning: Incoming: 63A 4Pole MCB Isolator + 63A 30mA 4P ELCB- 1No. Outgoing: 16A/25A/32A SP MCB C Curve - 24 Nos.

Supply, Installation, testing and commissioning of 20 W LED wall Mounted tube Light complete with control gear and lamp.

Supply, Installation, testing and commissioning of 7W LED Spike Light.

Supply, Installation, testing and commissioning of 3W LED spot light

Supply, Installation, testing and commissioning of 5watt LED strip including DC drive.

Supply,Installation, testing and commissioning of 1200mm sweep Ceiling fan with 2 feet rod.

Supply, Installation, Testing and Commissioning of the following 4 star inverter split AC units including cost of all materials, labour, machinery, tools and tackles, scaffolding, loading charges, unloading charges, transportation, lead, lift, taxes, rehandling, rentals etc. complete as per the specifications and directions of the Site In Charge.

DG SETs: Installation, testing and commissioning of DG sets complete with fuel tank, residential silencer , anti vibration pad, fuel piping and acoustic enclosure as per CPCB2 regulation, Standard control panel, all meters and neutral CT and std by E/F relay.

25 kva DG set

EXHAUST PIPING : Supply & Laying of 1 run MS pipes of following diameter for exhaust line of DG sets with all accessories like flanges, brackets,gaskets and nut & bolts etc including painting with 2 coats of enamel paint and primer

100mm diameter

PIPE EARTHING: Supply, Installing, testing and commissioning of 2 Mtr. long 50 mm GI pipe earth electrode buried in ground with alternate layer of charcoal and salt including construction of trough with RCC cover as per IS 3043.

Supply, Laying, fixing of the earthing conductor of the following sizes including excavation of trenches, drilling holes, soldering, jointing etc. complete as required.

25 x 3 mm Cu. Strip.

No. 10SWG. Copper

No. 8SWG. Copper

No. 6SWG. Copper

Preparation, submission of drawings, Testing of LT TOD Energy Meter & CTs and arranging Inspection for obtaining sanction for power allocation from Kerala State Electricity Board. (Including all incidental charges and excluding all statutory charges).

Toilet block, Watchman's cabin and Compound Wall- Electrical Works

Light Points: Supply and Installing 20mm ISI grade rigid PVC conduit open on Steel structure ceiling with all accessories(Conduit drops in walls to be concealed) and carrying out wiring using 1.5 sq mm PVC insulated FRLS single core copper conductor wires, for phase& neutral along with 1 sq.mm PVC insulated FRLS single core copper conductor wire for earth, 5A modular type switches, MS box front plate, testing and commissioning.(Maximum distance to every secondary point is 5meter.)

One light point controlled by one No. 6A SP switch.

Two light points controlled by one No. 6A SP switch.

Three light points controlled by one No. 6A SP switch.

Four light points controlled by one No. 6A SP switch.

Six light points controlled by one No. 6A SP switch.

LED strip light point controlled by one No. 6A SP switch

Fan points: Supply and Installing 20mm ISI grade rigid PVC conduit and SS hook open on Steel structure ceiling with all accessories (Conduit drops in walls to be concealed) and carrying out wiring using 1.5 sq mm PVC insulated FRLS single core copper conductor wires, for phase& neutral along with 1 sq.mm PVC insulated FRLS single core copper conductor wire for earth, 5A modular type switches, MS box front plate, Electronic step type regulator, testing and commissioning.

RJ45 SOCKET – INTERNET:Supply and Installation of modular type RJ45 socket fixing on concealed MS box, testing and commissioning.

RJ11 SOCKET-TELEPHONE : Supply and Installation of RJ11 telephone socket fixing on concealed MS box, testing and commissioning..

Supply and Installation of 3pin 6A modular socket outlet concealed in wall controlled by one No. 6A SP modular switch at combined position including MS module box , Front plate, Cover plate and switch, Testing and commissioning.

Supply and Installation of 3pin 6A modular socket outlet concealed in wall controlled by one No. 6A SP modular switch at independent position including MS module box , Front plate, Cover plate and switch, Testing and commissioning.

Supply and Installation of 3pin 16/6A modular socket outlet concealed in wall controlled by one No. 16A SP modular switch at combined position including MS module box , Front plate, Cover plate and switch, Testing and commissioning.

Supply and Installation of 3pin 16/6A modular socket outlet on steel column, controlled by one No. 16A SP modular switch at independent position including PVC module box , Front plate, Cover plate and switch, Testing and commissioning.

Supply and Installation of 3pin 20/16A modular socket outlet concealed in wall controlled by one No. 20A SP modular switch at combined position including MS module box , Front plate, Cover plate and switch, Testing and commissioning.

Supply and Installing 20mm ISI grade rigid PVC Conduit open on steel structure ceiling with all accessories.

Supply and Carrying out circuit main wiring from DB using 1.5 sq.mm PVC insulated stranded FRLS single core copper conductor wires for phase & neutral along with 1.0sq.mm PVC insulated FRLS single core copper conductor wire for earth, testing and commissioning.

Supply and Carrying out circuit main wiring from DB using 2.5 sq.mm PVC insulated stranded FRLS single core copper conductor wires for phase & neutral along with 1.5sq.mm PVC insulated FRLS single core copper conductor wire for earth, testing and commissioning.

Supply and Carrying out circuit main wiring from DB using 4.0 sq.mm PVC insulated stranded FRLS single core copper conductor wires for phase & neutral along with 2.5sq.mm PVC insulated FRLS single core copper conductor wire for earth, testing and commissioning.

OFFICE VDB : Supply, Installation, testing and commissioning of wall mounted type double door dust tight and vermin proof 12 way TPN Vertical DB consists of the following breakers, termination of circuits, testing and commissioning: Incoming: 63A 4Pole MCB Isolator + 63A 30mA 4P ELCB- 1No. Outgoing: 6A SP MCB C Curve - 8 Nos. 16A SP MCB C Curve - 6 Nos. 20A SP MCB C Curve - 6 Nos. 25A SP MCB D Curve - 4 Nos.

Supply, Installation, testing and commissioning of 20 W LED wall Mounted tube Light complete with control gear and lamp.

Supply, Installation, testing and commissioning of 7W LED Spike Light.

Supply, Installation, testing and commissioning of 3W LED spot light

Supply, Installation, testing and commissioning of 5watt LED strip including DC drive.

Supply, Installation, testing and commissioning of 18watt Bulkhead fitting.

Supply,Installation, testing and commissioning of 1200mm sweep Ceiling fan with 2 feet rod.

Supply, Installation, Testing and Commissioning of the following 4 star inverter split AC units including cost of all materials, labour, machinery, tools and tackles, scaffolding, loading charges, unloading charges, transportation, lead, lift, taxes, rehandling, rentals etc. complete as per the specifications and directions of the Site In Charge.

PIPE EARTHING: Supply, Installing, testing and commissioning of 2 Mtr. long 50 mm GI pipe earth electrode buried in ground with alternate layer of charcoal and salt including construction of trough with RCC cover as per IS 3043.

Supply, Laying, fixing of the earthing conductor of the following sizes including excavation of trenches, drilling holes, soldering, jointing etc. complete as required.

No. 10SWG. Copper

No. 8SWG. Copper

No. 6SWG. Copper

Preparation, submission of drawings, Testing of LT TOD Energy Meter & CTs and arranging Inspection for obtaining sanction for power allocation from Kerala State Electricity Board. (Including all incidental charges and excluding all statutory charges).

EXCLUSIVE OF GST

Note :1 All materials, Items, Equipment shall be best branded items with IS and approved by client/KEL

2:Rate should be inclusive of Insurance,Transportation, delivery and installation cost for all items

3.Rate should be Exclusive of GST.

4.Work should be executed as per DSR/PWD specification and direction of Engineer at site.

5.CEMENT: Make use Malabar cement only as per Govt. direction and in case of non availabilty of Malabar cement use Ultra Tech, Dalmia, Ramco or eq. brand in the order of preference.

6.RCC: (Assessment of strength of concrete by Cube testing at Approved Govt labs as per IS) Cement make: Use Malabar cement only as per Govt. direction and in case of non availabilty of Malabar cement use Ultra Tech, Dalmia, Ramco or eq. brand in the order of preference.

7.Rough Granite stone:Banglore stone of Size 30*60cm( Variation in rate due to change in size of block and level of floor as per DSR/PRICE has to be considered)

8.STEEL REINFORCEMENT: Make: Tata,Vaishak, SAIL, JSW or eq primary make in the order of preference

9.CENTERING & SHUTTERING: (Centering and shuttering for different category of work may be considered separately.)

10.PLUMBING & SANITARY FITTINGS: Note: Make of Water supply and sanitary items: Best branded ISI make Jaquar, Cera, Hindware, Parryware or eq. in the order of pref. Water pipe: Supreme, Finolex or eq. with IS and all fittings with IS.

11. ACRYLIC SMOOTH EXTERIOR PAINT/ SYNTHETIC ENAMEL PAINT/WHITE CEMENT BASED PUTTY/ CEMENT PRIMER: Make: Asian, Berger, Nerolas or eq. in the order of pref.

12.DELUXE MULTI SURFACE PAINT SYSTEM: Make: JOTUN, Asian, Berger, Nerolas or eq. in the order of pref.

13. ELECTRICAL: Note: Rate should be inclusive of preparation of schematic diagram and getting approval from KSEB/Electrical Inspectorate. Statutory fees paid to KSEB/EI shall be paid by us separately.

Make of Electrical equipments/materials

All electrical materials/equipments shall be of best branded items with ISI, strictly as per schedule specification

Panel Boards: CPRI certified reputed manufacturers make

MCB/ELCB/DB - L&T/LEGRAND/SCHNEIRDER or equivalent

Cables & wires - Finolex/KEI/POLYCAB/RPG/V-GUARD

Switches/Sockets/Regulators - SCHEIDER/ABB/HAVELS/LEGRAND or equivalent

Rigid PVCPipes/Casing & Capping - A-ONE/REPUTED MAKE with ISI , Precession, Balco, GEO

Cable Glands & Sockets - REPUTED MAKE , Cosmos

Indicating Lamps - TEKINIC/RISHUB/STC, L&T, Schneider or equivalent

Ceiling/Exhaust fan: Havells, Orient, Usha, Crompton Greaves, Bajaj

AAYKAYCONSTRUCTIONS

CUBIX INFRASTRUCTURES