GE P/DDN/T-01 OF 2024-25

Amount

Excavation in post holes (or similar holes) each n.exr 0.50 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exe 25 cm watering and removing surplus soil to a distance n.ece 50 m and making good surface complete all as specified and directed.

M&L P.C.C 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation and mass concrete complete all as specified and as directed.

M&L for broken stone/boulder Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L P.C.C 1:4:8 type D-2 100 mm thick as in sub base of floor complete all as specified and as directed.

M & L for Non - skid Ceramic floor tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:6) set and jointed in neat cement slurry and pointed in coloured cement complete all aspecified and directed

Material and Labour, for pre-painted, galvalume aluminium zinc coating GI based profiled steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F 0.50mm thick pre-painted galvalume zinc coated GI based plain sheet of any colour having tensile strength of 550 Mpa, AZ-150 fixed as in roof covering/ cladding to wall, ridges, valley gutter etc with self tapping screws complete all as specified and directed.

S & F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed

S & F MS Joist channel, angle or tee sections, MS tubes, Flast, Squar bars etc as in roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channelor flat sections) including distance pieces, cleats etc complete all as specified and as directed.

M&L for preparation of new steel surface of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down copper / aluminium point wiring (light, fan,socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fitting etc removing materials to store for keeping insafe custody or for taking credit (credit for above items should be made as per conditions separately and making food disturbed surfaces of walls, floors etc.

Material and labour for point wiring with 1.5 sq mm PVC insulated, unsheathed, stranded copper conductor (FRLS-H) cable single core 1100 Volt grade in and including rigid PVC conduit medium grade 20mm dia or more ISI Marked concealed conduit/ casing caping and conduit accessories and cutting chases of suitable girth where required on brick/concrete surface & making good disturbed surface,provision of GI/Pressed steel terminal switch box with plastic laminated sheet 3 mm thick fixed with brass screw and washers along with 1.5 sq mm PVC insulated unsheathed stranded copper conductor cable (FRLS) as earth wire connected with main common earth dolly complete all as specified and directed for the following :- One light point controlled by one 1-way switch

One three pin socket out let 5 Ampon same board complete.

S & F switch modular type 6A 240 Volts complete all as specified and directed.

M & L ceiling rose surface type bakelite 65 x 50 mm with one three terminals complete all specified and directed.

S & F socket outlet 2 in 1, 3pin, 5/6 amp modular 2 module type with shutter complete.

M&L wiring for circult/submain wiring alongwith earth wire with the following sizes of FRLS-H is PVC insulated unsheathed, 1100 volts grade, single core copper conductor cable, drawing through and including suitable size of steel condult as required with accessories such as junction boxes, bends, tees tec. On surface/ recessed. Rate shall be including for taking down old submain wiring and making good disturbed surface of walls/ floors etc complete all as specifed and directed by Eng-In-Charge for the following items nos from 19 to 24 2x6 sq mm + 1x4 sq. mm earth wire

S&F LED lights fitting 1x20w , 220V, AC decorative box tybe with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size form ceiling rose complete make philips/ crompton/havels/ anchor.

Supply and fix sheet steel factory made, powder coated MCB DB with bus bar 200Amps Neutral link, Earth Bar, double door SPN 4 way 230volts all as directed make indoasian/ legrand/ havells.

S&F MCB single pole 240 volts 6-32 Amps, 10KA, B-series.

S&F MCB SPN 240 volts 5-32 Amps, 10KA, B-series.

MOHAN SINGH AND SONS

PAWAN KUMAR

HARJINDER PAL SINGH