Providing and Laying Plain Cement Concrete (PCC) Flooring and Painting Work at the Community Hall under Ward No. 9, Municipal Corporation Baddi.

Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm nominal size)laid in one layer finished with a floating coat of neat Cement. 40 mm thick

Providing and laying Duro stone vetrified tiles (300x300mmx8mm) in grey/coloured of required shade in skirting risers of steps and dados on 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.

White washing with lime on undecorated ceiling and/or slopping roofs surfaces two coats to give an even shade including thoroughly brooming the surface to remove all dirt dust mortar dirt and other foreign matter.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equivalent on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete.

supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing

Extra for providing mechanical device chain and crank operation for operating rolling shutters.

For shutters of doors, windows & ventilators including providing & fixing hinges/ pivots & making provision for fixing of fittings where ever required including the cost of PVC/ Neoprene gasket as required ( fitting & glazing/ panelling shall be paid for separately ) as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing glazing in aluminium doors, windows, ventilators shutters & partitions etc. with PVC/Neoprene gasket etc. complete as per the Architectural drawing & the direction of Engineer-in-Charge ( Cost of aluminium snap beading shall be paid in basic items ) glazing with glass panes of 5.50 mm ( Five point five millimeter ) thickness ( Weight not less than 13.75/Kg ( Thirteen point seven five kilograme ) per Square meter as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge