Estimate for Digging Bore Well Fixing motor pump set and related works at main MCF

Amount

Electrification of DWSS

OD240263/2024-2025:Supply of 3 phase 4 HP/2.98 KW. bore well submersible pump set capable to discharge 20 to 70 LPM of clear water to a head 120-250 M. 220-40 LPM , 40 mm out side pipe suitable to work with 415V,50HZ,A.C supply including of all taxes.Makes prefared :- Deccan - ER 42H Or equ / Texmo / Deccan Kirloskarbrands

OD240262/2024-2025:Submersible pump controllers with ammeter,volt meter,SPP, for three phase 4 H.P submersible motor pumps (MU-G6 DOL )

OD240264/2024-2025: Charges for installation of above 4 H.P, 3 phase , submersible pumpset into well after connecting the delivery pipes, and lead cables to motor and hanging the unit on poly propelyne rope to 66 Meters depth in trouble free operation and conducting trail run satis factorly .

90.14.24.2:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.2 KVAr, 3 phase, 440 V, delta connected standard duty Metalised Poly Propylene Capacitor, Cylinderical Type, suitable for direct connection to motors.

OD240242/2024-2025:Supply and providing 4 pole enclosure for independent mounding of MCB/RCCB/Isolator etc.

OD240257/2024-2025:S&F 40 A,4 pole RCCB 100/300 mA

OD240247/2024-2025:Supply and installation of switch gear units in sheet steel enclosure complete with handle assembly, door interlock and pad locking arrangement, of the following ratings on existing angle iron frame work or directly to wall using necessary bolts & nuts, fixing the unit to wall, making good the damages, color washing etc. including giving necessary connections, Fuse links as required. Switch disconnector unit 32A TPN AC23 A

90.6.10.2:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required25 mm

90.6.6.3:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.4 sq mm

1.17.22:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 4 sq. mm

OD240251/2024-2025:supply and providing 38/40 mm outer dia CPVC pipe for delivery line

OD240241/2024-2025:Supply and providing adaptor suitable for 38/40 mm inner dia CPVC pipe

OD240256/2024-2025:Supply and providing 40 mm dia G.I pipe (B class) for delivery line

OD240253/2024-2025:Supply and providing 40 mm dia GI bend

OD240259/2024-2025:Supply and Providing 40 mm dia GI coupling

OD240258/2024-2025:Supply and providing 40 mm dia G.M Non Return Valve

OD240246/2024-2025:Supply and providing 40 mm dia GI union

OD240260/2024-2025:Supply and providing good quality garware make nylon marine rope 16 mm size with required PVC tie-bad ad tieing the pump set with required outside the well

OD240249/2024-2025:Supply and providing PVC Bore Well End Cap (160 mm) 6 inch Heavy

OD240248/2024-2025:Supply and providing M.S. borewell clamb with bolt and nut.

14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.

14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

14.11:Providing brick work (in width 225 mm or more) with F.P.S. bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) at all levels.

14.12:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

90.12.9.2:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

5.15:Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

OD240243/2024-2025:Providing and fixing test joint on watering pipe, made of 2 no. strips as mentioned below of the following sizes provided on either side of the conductors with 4 nos of GI bolts, nuts check nuts and spring washers etc. complete as required.2Nos 25x6 mm G.I. strip 200 mm long

90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)

90.16.1.4:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG)

90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

OD240244/2024-2025:Supply and providing the following sizes of bolt and nut with washers on the existing MS box/earth bus etc. as required including necessary holes as required. 25x3mm brass nut and bolt

OD240252/2024-2025:Supply and providing the following sizes of bolt and nut with washers on the existing MS box/earth bus etc. as required including necessary holes as required. 25x6mm brass nut and bolt

OD277019/2024-2025:Supply and providing dust and vermin proof, wall mounting, SMC/PVC meter box, of following size suitable for fixing kseb meter, fuse unit,CT etc. hinged door construction for the front side, providing vision panel for the meter compartment, knockout for cable entry and exit as required .GS-MB 3425 (inside 340X250X150 mm)

OD277020/2024-2025: Supply and fixing 32A, 415 V, 2 way neutral link mounted on DMC/ SMC base in the existing meter board and giving connections etc..

OD277022/2024-2025:Supply and providing 32 A HRC fuse unit with HRC fuse link i the meter box and giving connections as required

OD277021/2024-2025:supply and providing M8 anchor bolt hook in wall / parapet for biding support for service main wire

OD276855/2024-2025:Preparing completion and test certificates for KSEB connection

VENKITA RAMANAN.P.S (BID ID -2074973)

Bidder Name

VENKITA RAMANAN.P.S

M M ABDUL RASHEED