JAIDEVPUR-CHHARAYAL NAYABAD WATER SUPPLY SCHEME OF BLOCK HALDWANI

Amount

Civil Works

Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Bituminous road .

Nominal conc.1:3:6 or richer mix

Excavation in soil mixed with single bouldres etc. requireing the use of specials T&P for foundation including lift up to 1.5M and lead up to 30M filling waterring and ramming of Excavated the earth in to the trenches or into the sides between foundation

Supply, Carting, Laying, Jointing, Fixing and Testing of following sizes MSERW pipe with specials and fitting in trenches under ground including cutting, Laying and Jointing by welding etc. Complete.

150 mm dia 5.6 mm thick MS ERW pipe GRADE Yst 210 as per latest IS amendments

200 mm dia 4.80 mm thick MS ERW pipe GRADE Yst 210 as per latest IS amendments

Supply of all materials, Carting , Laying & Jointing of G.I. screwed pipes (including supply of all jointing materials like specials, white lead, hemp & oil etc) in trenches with its cutting, threading and testing of pipe line and supply of labour ,T&p etc complete in all respect.

150 mm dia

125 mm dia

100 mm dia

80 mm dia

50mm dia

Supply and fixing of the following fittings including cartage of materials labour T&P and testing of valves etc. complete

C I /D F Sluice valve Confirming to IS 1486:2000 ( Kirloskar Make)

(i) 200 mm dia

(ii) 150 mm dia

(iii) 125 mm dia

(iv) 80 mm dia

(iv) 50 mm dia

Making connection with the existing M.S. Galvanised mains of upto 25mm nominal dia, including cutting and threading of pipe, bailing out water, fixing, if required, specials and testing etc. complete, but excluding cost of insertion pipes and specials besides boring out (and also subsequent back fill) existing main.

100 mm to 150 mm

50 mm to 80 mm

Supply of all materials, labour, T&P etc and construction of R.C.C. O.H.T. of Following capacity and staging with 1.00 m wide R.C.C. stair case from G.L. to balcony and from balcony to top dome 1m x1m R.C.C. landing at suitable locations and railed with 3 rows of 20mm dia G.I. (M) pipe on 65x65x5 mm angle iron posts fixed with ladder, from top to the floor inside of the tank, M.S. M.H. cover with locking arrangement, lightning conductor as per electricity rules, water level indicator, supply and fixing of outlet, inlet, over flow and washout pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60M wide apron, painting on tank body vertical pipes, ladder, M.S. M.H. cover, ventilator column etc. complete with approved water proofing (apex.)/enamel paint, testing, filling water for testing purpose etc. including supply of vertical pipes and specials, assuming bearing capacity as 8MT/M2 and staging 12.00 meter

RCC OHT 300 KL capacity with 18 mtr Staging.

Decrease in Rates for increasing bearing capacity for each 0.50T/Msqm.

Increase in Rates for increasing staging for 0.50 m each.

Decrease in Rates for decreasing staging for 0.50 m each.

For Pump House ,Chamber ,boundry wall & other apprutenent works

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. - All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work up to plinth level - 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand).

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand).

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size).

Supplying and filling in plinth with earth, sand and other filling materials under floors including, watering, ramming consolidating and dressing complete.

Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required. for doors, window, ventilator,gate and similar works. use angle, square bar, etc

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. - Using M.S. angels 40x40x6 mm for diagonal braces.

Providing & fixing glass panes with putty and glazing clips in steel windows & ventilator all complete. With 4.0 mm thick glass panes.

Providing & fixing fly proof wire gauze to windows and ventilator with M.S. Flat 15x3 m and nuts & bolts complete. - Galvanized M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides.

Providing and laying in position specified grade of reinforced cement concrete: 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) - all works up to Plinth level.

Reinforced cement concrete for different works upto floor five level in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. - Using Thermo-Mechanically Treated Bars.

Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. - ISMB 300 x 140

12 mm cement plaster of mix in 1:6 (1 cement : 6 coarse sand)

62 mm thick cement concrete flooring with concrete hardener topping under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6mm nominal size) by volume. Hardening compound is mixed @ 2 liter per 50 kg of cement or as per manufactures specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinkable priming coat to give an even shade.

Finishing walls with exterior paint of required shade - New work (Two or more coat applied over and including base coat of water proofing cement paint applied .

Painting Steel work(doors, windows, etc.) with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied over an under coat of primer applied of approved brand or manufacture.

Providing and fixing on wall face unplasticised Rigid PVC pipes. With 110 mm diameter

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm - White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.

Providing and fixing PTMT bib cock of approved quality and color. - 15mm nominal bore, 90mm long, weighing not less than 93 grams.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. - 15mm dia

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Making soak pit 2.5 m diameter circular / 2.5 m square 3.0 meter deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With F.P.S. bricks class7.5.

Providing and laying in position cement concrete of specified grade All work up to plinth level - 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).For road restoration & other works

E&M Works

Construction of 1No. 300mm dia, 250Mt. deep Tubewell.

Drilling Work

Transportation of Rig machine, Air compressor O.P. unit and T & P and other equipments up to site including loadinng unloading etc complete in all respect.-1 Job.,Installation and leveling of Rig machine, at site of work. - 1 Job, Drilling 550mm dia size final bore from G.L. to required depth . - 250Mts., Collection of strata sample in box.-1 Job, Dismantling of Rig machine after completion of work. Fitting of girder and clamp, well cap.- 1Job, Arrangement of water. -1 Job., Geophysical logging of bore well - 1Job., Preparing and Lowering of tube well assembly G.L. to 250MBGL. -1 Job, Pea-Gravel Feeding from 250MBGL to G.L. .-1 Job , Fitting of girder, clamp and well cap.- 1Job,

Supply & lowering of Tubewell assembly.

300mm dia 7.9mm thick M.S.E.R.W. pipe.

300mm dia 7.9mm thick M.S.E.R.W. Slotted pipe.

200x100mm dia size M.S Girder 4Mt. Long for T.W. assembly.

300mm dia Bail plug with hook.

M.S. heavy duty D.E clamp suitable for 300mm dia.

300mm dia well cap.

Supply and shrouding of Pea-Gravel upto 250Mt.MBGL

Development of Tubewell by 350 PSI/1100CFM air comperssor.

Erection of compressor and T&P.

Development by compressor.

Dismantling of above.

Development of Tubewell by O.P. unit of suitable capacity.

Erection and lowering of O.P Unit.

Development by O.P unit to get sand free discharge of 1875LPM.

Dismantling of O.P unit and site clearance after completion of work.

Geohydrologgical survey of site

Chemical & Bacteriological Test of water

S.I.T.C. of Submersible Pumping Plant with Accessories for Tubewell

Supply of Submersible pump and motor set: 1500 L.P.M. discharge at 200mts. NEH.

Supply of Submersible pump and motor set: 1500 L.P.M. discharge at 200mts. NEH. as spare.

Supply of Fully automatic Air cooled Auto-Transformer Starter cum panel of 100HP as per spacification .

Supply of Main piping and valves as per specification and site Requirment

Supply of of 35sq.mm. 3 core Copper conductor P.V.C. insulated submersible cable

Supply of 200KVA automatic voltage regulator (compact) servo controlled stabilizer with accessories as per specification and site Requirment

Supply of chain pulley 10tonne capacity with 4.5mt.lift .

Suppl of Electronic type liquid chlorine dosing system

Suppl of Chlorine Testing Kit

Suppl of Liquid Chlorine (50Kg Cane)

Suppl of Gauges as per specification

Supply of Earthing materials as per specification and site Requirment

Supply of Rubber Insulation sheet 1mt. x 2mt.x 0.025

Supply of Tools and spanner

Supply of Spare for starter cum panel

Supply of 315Amp. TPN Main Switch

Installation, commissioning and Testing.

Six month Trial Run/Maintenance for tubewells

Total (B)

Automation of Pumping plant for Tubewell

GSM based Intelligent Remote Terminal Units (IRTU) with Analog and Digital parameters and features as specified to store and transmit data on GSM backbone to LMS. And also compatible to communication for each Tubewell.

GSM Based wireless communication system capable to transfer data from remote sites control station with antenna.

Intelligent Energy Meter.

Valve actuator size 150mm.

Actuator panel

Isolation transformer

Cables

2 Core 1.5sq.mm.

4 Core 2.5 sq.mm.

10 Core 1.5 sq.mm.

PVC conduit Pipe.

AC& DC, Relay lugs etc.

Auto phase reversal unit 40-100H.P.

Electromagnetic Insertion type Flow Meters for line sizes 150mm

Erection, commissioning and Testing & customization of iRTU/PLC & software

Total ( C)

Internal & External Electrification of pump house for Proposed Tubewell

Wiring for light point/fan point, exhaust fan point, call bell point with15.sq.mm FRLS PVC insulated copper conductor single core cable in surface, recessed medium class PVC conduit , with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc, as reuired.

Wiring for circutit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.

2x2.5 sq. mm +1x2.5sq.mm earth wire

2x4 sq. mm +1x4sq.mm earth wire

supplying and fixing following piano type switch/scoket on the existing switch box/cover including connections etc. as required.

5/6amps switch

3pin 5/6 amp socket outlet

supplying and fixing metal box of 150mm x75mm x60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front incuding providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.

supplying and fixing metal box of 180mm x100mm x60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front incuding providing and fixing 6 pin 5/6 A & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

S/F 3 pin , 5 amp celling rose on the exting junction box/wooden block including connection etc, as required.

S/F brss batten, angle holder including connction etc, as requird.

supplying and fixing 6 way Double door, single pole and neutral, sheet steel, MCB distribuiton board, 240v, on surface/recess, complete with tinned copper bus bar , neutral bus bar, earth bas, din bar, interconnections, power painted indulding earthing etc. as required (But without MCB/RCCB/Isolator)

S/F 5 amps to 32amps rating, 240/415 volts, "C" curve, mainature circuit braker suitable for inductive load of follwing poles in the existing MCBDB compete with connection, testing and commissioning etc. as required.

Single Pole

Double Pole

S/F Security light LED Type, 40 watts with bracket, clamp, connection etc compete in all respect

S/F 23 watts CFL

S/F of LED T_5, 18 watts tubelight fitting connection etc, compleat in all respect

S/F of exhaust fan (i.s.i mark) with jali, 450mm sweep, including making hole for exhaust fan and connection etc, complete in all respect.

S/F of of Wall fan model platina 400mm sweep

M/s Trilok Rawat

M/s Kashmirilal Constructions Pvt. Ltd.