WBPWD/AE/NKHESD/NIQ- 33/Q of 25-26

Amount

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish Avarage run 8 mtrs

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish A) On Board

Charges for dismantling & removal the old type electrical installtions as per given layout. from the working site as per direction of Engineer in charge

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Havells/ Polycab/ RR Kable/ KEI/ Gloster) in 20mm size PVC rigid conduit 'FR' (Precision/ Polycab) incl. necy. fittings as required A) 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

B) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.

Supply & Delivery of 220-240V 4ft long LED Tube Light. (Make: Philips Model: Mas LEDtube 1200mm 18W865 T8 I – 2100lm or Make: CG Model: LTB-20-865-(2) with metal heat sink)

Supply and Fixing of 220V LED Bulk Head on Ceiling (make: CG Model: LBHP-10-CDL)

Supply and Delivery 220V 9" exhaust fan completely metal Body (Make: EPC)

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter a) 23 cm (9")

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6mm dia x 62 mm long) For GI a) 23 cm Exhaust fan (9")

Supply and fixing outdoor type luminaries complete with all accessories on existing pole or arm bracket. (Make: CG Model: LSTS-30-CDL/NL-M or Equivalent make of Philips/ Wipro)

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish. Average run 4.5 mtr

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (ANCHOR PENTA WHITE) on sheet metal switch board embedded in wall incl. S & F150x100x65 mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) a) 200 x 150 x 100mm after dismantling the damaged looping cable box etc. where necy. incl. painting

Supply and Installation of Single Phase Timer control panel for automatic segmentia; consisting of following: i) 12 Way SPN MCB DB (L&T) - 1 No. ii) Digital time switch (L&T, Cat no. AUTS02DIG00) - 1 No. iii) 40 A DP Power Contactor (L&T, MU-2P Contactor) - 1 No. iv) 40A DP MCB Isolator (L&T) - 1 No. v) Toggle switch (L&T)- 1 No. vi) Indicating lamp (L&T) - 1 No. vii) Inter connection by suitable size copper conductor (Havells/ Finolex/ Polycab)

Supply & delivery 230V 50Hz 400mm ( 16 inch) sweep heavy duty full metal body wall bracket fan with all accessories with necy. bolts & nuts. ( Make- EPC Tempest WALL BRACKET AIR CIRCULATOR FANS/CG/Orient)

Fixing only 16" wall bracket fan on wall by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length

Supply and Delivery of 1.1kV grade aluminium armoured XLPE cable (Make- RR Kable/ Gloster/ Polycab/ Havells/ KEI) of following sizes: a) 2 Core 6 Sqmm

Laying of cable 2 core 06 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below: 2 Core 06 Sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 2 Core 06 Sqmm

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. a) 2.5/ 1.5 Sqmm

b) 4 Sqmm

c) 6 Sqmm

d) 10 Sqmm

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe (Jinadal/ Utkarsh/ Bhusan/ Bansal)

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages (a) Solid GI Plate i) No. 8 SWG

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint a) Upto 9.0 mtr. long pole (i) 1st coat of aluminium paint over 1 coat of RO priming

(ii) 2nd coat of aluminium paint over 1st coat

M/S R. K. ENTERPRISE (BID ID -7393829)

Electromech Engineers Co-Operative Society Ltd. (BID ID -7435993)

KAMALA ELECTRICE WORKS (BID ID -7474802)