Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.6 LAccepted-AOC FLAT NO 305 SUBBARAO RESIDENCY THENNETI NAGAR MURALI NAGAR VISAKHAPATNAM 07 | VISAKHAPATANAM | ANDHRA PRADESH | 530001 | L1 | Accepted-AOC LOWEST TENDER | |
| 2 | L2₹49.2 L+₹1.3 L (2.70%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST TENDER | |
| 3 | L3₹49.3 L+₹1.4 L (2.95%)Rejected-Finance ASHOKA PARK PALLAVA PARK BVT INS VISHWAKARMA INDIAN NAVY OF GE ND VISAKHAPATNAM | BAPATLA | ANDHRA PRADESH | 504214 | L3 | Rejected-Finance NOT LOWEST TENDER | |
| 4 | L4₹53.2 L+₹5.3 L (11.1%)Rejected-Finance H NO 8 9 29 ASOKE NAGAR OLD GAJUWAKA VIZAG 530028 | VISAKHAPATNAM | VISAKHAPATNAM | ANDHRA PRADESH | 530028 | L4 | Rejected-Finance NOT LOWEST TENDER | |
| 5 | L5₹54.7 L+₹6.8 L (14.2%)Rejected-Finance D NO 44 38 12 23 4 AVS PARADISE SRINIVASA NAGAR AKKAYYAPALEM POST VISAKHAPATNAM 530 016 | VISAKHAPATANAM | ANDHRA PRADESH | 530016 | L5 | Rejected-Finance NOT LOWEST TENDER |
| Sl No | Description | Qty | Unit | M/S SRI VENKATA BHAVANI CONSTRUCTIONS L3 | SATYAM ENGINEERS L2 | SREE GAYATRI INFRA L1 | M/S CHANDRA ENGINEERS AND CONTRACTORS L7 | lakshmi Engineering Works L4 | SRI MAHALAKSHMI CONSTRUCTIONS L8 | CHAITANYA CONSTRUCTIONS L5 | GVR CONSTRUCTIONS L6 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00NOTES/INSTRUCTIONS FOR STRICT COMPLIANCE (a) The contractor shall obtain sample approval for all materials for incorporating in the work as per condition 10 of IAFW-2249 and Para-12 of Special Conditions of tender document mentioned here-in-after. (b) The GE may direct the contractor in writing to procure and deposit up to 80% of the material required for the complete scope of work. The decision shall be final and binding on the contractor. (c) The contractor shall deposit the procured material under intimation to GE to the store of concerned subdivision within 30 days from the receipt of written direction. Failure to do so shall result in a penal recovery of Rs 2000/- per week, levied on the dues of contractor, maximum up to 10% of the work done/CA Amount whichever is higher. (d)The contractor shall obtain approval of “Qualified Tradesman” as per condition 26 of IAFW-2249 before commencement of work at site and shall have sufficient manpower such as plumber, welder, helper etc readily available to meet the site requirement during emergency situation as per directions of Engineer-in-Charge/GE | |||||||||||
| 1.01NOTES(Contd---) (e)The breakdown/Leakeges should be attended well within time mentioned here-in-after from the time of intimation (through Verbal/Site Order/Written) by the Engineer-in-Charge/GE, failing which a penal recovery of Rs 500/- per hour shall be deducted from contractors dues: Size of Pipe Time limit to attend Breakdown & Completion Upto 50mm 6 Hrs 50mm-100mm 8 Hrs More than 100mm 12 Hrs (f) The quoted rates shall be inclusive of cost of necessary Tools, Plants, Safety Equipments, Machinery, Arrangements of Manual Dewatering/Dewatering pumps and Temporary lighting arrangements for work during night time etc as per site requirement. (g) The quoted rates shall be inclusive of cost for necessary scaffolding for working upto 9th floor level of multi-storyed Buildings under AoR of GE (U-II). | |||||||||||
| 2.00 | Material and Labour for servicing of DG set of the DG set of capacity 500 KVA of existing Make and model by carrying out the following maintenance as per manufacturers instructions including cleaning the engine, alternator, inferiors and exteriors of acoustic enclosure completely by blowering and with cotton waste and testing on completion at connected load for entire satisfaction of Engineer-in-Charge and complete all as specified and directed :-
(a) Draining out engine oil from the sump by removing drain plug, cleaning the sump thoroughly and refilling the sump with new engine oil to required level (Note: Engine Oil will be measured and paid separately as 'Supply Only')
(b) Draining out of diesel from tank and storing in cleaned containers, cleaning the tank thoroughly by removing sediments settled at the bottom and refilling the drained out diesel duly filtered.
(c) Supply and replace complete set of engine oil filters, fuel filters, Bypass filter, air cleaner element and water separator.
(d) Draining out complete coolant water mixture from the radiator and re-filling the radiator with new coolant and water mixture with proportionate ratio (Note: Coolant will be measured and paid separately as 'Supply Only')
(e) Check and top up the electrolyte/distilled water in starting batteries to maintain the required specific gravity. Cleaning of battery terminals & applying petroleum jelly to battery poles & brass connectors.
(f) Checking and Tightening all the fasteners of complete DG set to the required torque, if required. | 1 | Each Job | 43,000 ₹43,000 | 51,000 ₹51,000 | 43,000 ₹43,000 | 49,500 ₹49,500 | 85,000 ₹85,000 | 40,000 ₹40,000 Lowest | 49,000 ₹49,000 | 41,000 ₹41,000 |
| 3.00 | All as per Srl item No.2.00 here-in-before but for DG set of capacity 400 KVA of existing Make and model | 1 | Each Job | 37,000 ₹37,000 Lowest | 44,000 ₹44,000 | 37,000 ₹37,000 Lowest | 40,000 ₹40,000 | 55,000 ₹55,000 | 38,000 ₹38,000 | 39,541 ₹39,541 | 37,000 ₹37,000 Lowest |
| 4.00 | All as per Srl item No.2.00 here-in-before but for DG set of capacity 320 KVA of existing Make and model | 1 | Each Job | 35,000 ₹35,000 | 36,000 ₹36,000 | 32,000 ₹32,000 Lowest | 42,123 ₹42,123 | 50,000 ₹50,000 | 36,000 ₹36,000 | 41,000 ₹41,000 | 35,000 ₹35,000 |
| 5.00 | All as per Srl item No.2.00 here-in-before but for DG set of capacity 250 KVA of existing Make and model | 1 | Each Job | 32,000 ₹32,000 | 32,000 ₹32,000 | 30,000 ₹30,000 | 30,123 ₹30,123 | 36,000 ₹36,000 | 38,000 ₹38,000 | 29,000 ₹29,000 Lowest | 33,000 ₹33,000 |
| 6.00 | All as per Srl item No.2.00 here-in-before but for DG set of capacity 200 KVA of existing Make and model | 3 | Each Job | 28,000 ₹84,000 | 26,500 ₹79,500 | 25,000 ₹75,000 | 22,561 ₹67,683 | 29,800 ₹89,400 | 30,000 ₹90,000 | 21,000 ₹63,000 Lowest | 28,000 ₹84,000 |
| 7.00 | All as per Srl item No.2.00 here-in-before but for DG set of capacity 160 KVA of existing Make and model | 2 | Each Job | 26,000 ₹52,000 | 27,500 ₹55,000 | 24,000 ₹48,000 | 25,485 ₹50,970 | 28,000 ₹56,000 | 26,000 ₹52,000 | 20,000 ₹40,000 Lowest | 25,000 ₹50,000 |
| 8.00 | All as per Srl item No.2.00 here-in-before but for DG set of capacity 125 KVA of existing Make and model | 2 | Each Job | 18,000 ₹36,000 Lowest | 24,000 ₹48,000 | 22,000 ₹44,000 | 20,123 ₹40,246 | 27,000 ₹54,000 | 19,000 ₹38,000 | 19,000 ₹38,000 | 18,000 ₹36,000 Lowest |
| 9.00 | All as per Srl item No.2.00 here-in-before but for DG set of capacity 100 KVA of existing Make and model | 2 | Each Job | 15,000 ₹30,000 | 23,000 ₹46,000 | 20,000 ₹40,000 | 19,654 ₹39,308 | 42,000 ₹84,000 | 15,000 ₹30,000 | 18,000 ₹36,000 | 14,000 ₹28,000 Lowest |
Tender Value
₹47.5 L
EMD Value
₹95,000
Closing Date
2 Sept 2025, 6:00 pmClosed
Garrison Engineer Utility-II Visakhapatnam
Garrison Engineer Utility-II 104 Area Industrial Estate Post Visakhapatnam -530 007
REPAIRS / MAINTENANCE TO DG SETS, FIRE FIGHTING NETWORK AND OTHER MISC E/M WORKS AT NAD, TECHNICAL BUILDING AT INS DEGA AND ADJACENT AREAS ALONG WITH CERTAIN E/M AMD B/R SERVICES OF NCN KAKINADA AND CONNECTED WORKS UNDER GE (UTILITY-II) VISAKHAPATNAM
2025_MES_725584_1
8099(A)
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
Garrison Engineer Utility-II Visakhapatnam
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Garrison Engineer Utility-II
₹95,000
Yes
11 Oct 2025
11 Aug 2025
3 Sept 2025
11 Aug 2025
2 Sept 2025
28 Aug 2025
11 Aug 2025 - 18 Aug 2025
Amount
NOTES/INSTRUCTIONS FOR STRICT COMPLIANCE (a) The contractor shall obtain sample approval for all materials for incorporating in the work as per condition 10 of IAFW-2249 and Para-12 of Special Conditions of tender document mentioned here-in-after. (b) The GE may direct the contractor in writing to procure and deposit up to 80% of the material required for the complete scope of work. The decision shall be final and binding on the contractor. (c) The contractor shall deposit the procured material under intimation to GE to the store of concerned subdivision within 30 days from the receipt of written direction. Failure to do so shall result in a penal recovery of Rs 2000/- per week, levied on the dues of contractor, maximum up to 10% of the work done/CA Amount whichever is higher. (d)The contractor shall obtain approval of “Qualified Tradesman” as per condition 26 of IAFW-2249 before commencement of work at site and shall have sufficient manpower such as plumber, welder, helper etc readily available to meet the site requirement during emergency situation as per directions of Engineer-in-Charge/GE
NOTES(Contd---) (e)The breakdown/Leakeges should be attended well within time mentioned here-in-after from the time of intimation (through Verbal/Site Order/Written) by the Engineer-in-Charge/GE, failing which a penal recovery of Rs 500/- per hour shall be deducted from contractors dues: Size of Pipe Time limit to attend Breakdown & Completion Upto 50mm 6 Hrs 50mm-100mm 8 Hrs More than 100mm 12 Hrs (f) The quoted rates shall be inclusive of cost of necessary Tools, Plants, Safety Equipments, Machinery, Arrangements of Manual Dewatering/Dewatering pumps and Temporary lighting arrangements for work during night time etc as per site requirement. (g) The quoted rates shall be inclusive of cost for necessary scaffolding for working upto 9th floor level of multi-storyed Buildings under AoR of GE (U-II).
Material and Labour for servicing of DG set of the DG set of capacity 500 KVA of existing Make and model by carrying out the following maintenance as per manufacturers instructions including cleaning the engine, alternator, inferiors and exteriors of acoustic enclosure completely by blowering and with cotton waste and testing on completion at connected load for entire satisfaction of Engineer-in-Charge and complete all as specified and directed :- (a) Draining out engine oil from the sump by removing drain plug, cleaning the sump thoroughly and refilling the sump with new engine oil to required level (Note: Engine Oil will be measured and paid separately as 'Supply Only') (b) Draining out of diesel from tank and storing in cleaned containers, cleaning the tank thoroughly by removing sediments settled at the bottom and refilling the drained out diesel duly filtered. (c) Supply and replace complete set of engine oil filters, fuel filters, Bypass filter, air cleaner element and water separator. (d) Draining out complete coolant water mixture from the radiator and re-filling the radiator with new coolant and water mixture with proportionate ratio (Note: Coolant will be measured and paid separately as 'Supply Only') (e) Check and top up the electrolyte/distilled water in starting batteries to maintain the required specific gravity. Cleaning of battery terminals & applying petroleum jelly to battery poles & brass connectors. (f) Checking and Tightening all the fasteners of complete DG set to the required torque, if required.
All as per Srl item No.2.00 here-in-before but for DG set of capacity 400 KVA of existing Make and model
All as per Srl item No.2.00 here-in-before but for DG set of capacity 320 KVA of existing Make and model
All as per Srl item No.2.00 here-in-before but for DG set of capacity 250 KVA of existing Make and model
All as per Srl item No.2.00 here-in-before but for DG set of capacity 200 KVA of existing Make and model
All as per Srl item No.2.00 here-in-before but for DG set of capacity 160 KVA of existing Make and model
All as per Srl item No.2.00 here-in-before but for DG set of capacity 125 KVA of existing Make and model
All as per Srl item No.2.00 here-in-before but for DG set of capacity 100 KVA of existing Make and model
All as per Srl item No.2.00 here-in-before but for DG set of capacity 82.5 KVA of existing Make and model
All as per Srl item No.2.00 here-in-before but for DG set of capacity 75 KVA of existing Make and model
All as per Srl item No.2.00 here-in-before but for DG set of capacity 62.5 KVA of existing Make and model
All as per Srl item No.2.00 here-in-before but for DG set of capacity 30 KVA of existing Make and model
All as per Srl item No.2.00 here-in-before but for DG set of capacity 20 KVA of existing Make and model
All as per Srl item No.2.00 here-in-before but for DG set of capacity 15 KVA of existing Make and model
Supply only engine oil of grade 15W-40 for various DG Sets, complete all as specified and directed.
Supply only of premix coolant water mixture (50:50) suitable for DG sets, complete all as specified and directed.
Supply only Def oil of high grade of approved make suitable for CPCB IV+ DG Set, complete all as specified and directed.
Supply and replace complete set of fuel pipes & leak off pipe with clamps suitable for existing make & model of DG set up to 400 KVA to 500 KVA capacity, complete all as specified and directed.
All as per Srl Item No 19.00 here-in-before but for DG set up to 125 KVA to 320 KVA capacity
All as per Srl Item No 19.00 here-in-before but for DG set up to 82.5 kva to 100 KVA capacity
Supply and replace 'V' belt suitable for existing make & model of DG set 400 KVA to 500 KVA capacity, complete all as specified and directed.
All as Srl per Item No 22.00 here-in-before but for DG set 100 KVA to 320 KVA capacity
All as per Srl Item No 22.00 here-in-before but for DG set up to 100 KVA capacity
Supply and replace complete set of hoses with clamps suitable for existing make & model of DG set 400 KVA to 500 KVA capacity, complete all as specified and directed.
All as per Srl Item No 25.00 here-in-before but for DG set 125 KVA to 320 KVA capacity
All as per Srl Item No 25.00 here-in-before but for DG set up to 100 KVA capacity
De-scaling of radiator assembly by carefully removing from the engine, transporting to civil workshop and removing the sediments, scales and rust etc by means of acid cleaning, high pressure water washing and air cleaning, arresting the leakages by gas welding / soldering with suitable material, re-assembling the same with new gaskets including replacement of radiator cap (wherever required) and transporting to the site, fixing to the engine for DG Set of capacity 400 KVA to 500 KVA and testing for satisfactory performance complete all as specified and directed by Engineer-in-Charge.
All as Srl per item No.28.00 here-in-before but for DG Set of capacity from 200 KVA to 320 KVA.
All as Srl per item No.28.00 here-in-before but for DG Set of capacity from 100 KVA / 125 KVA.
All as Srl per item No.28.00 here-in-before but for DG Set of capacity from 62.5 KVA /75 KVA/ 82.5 KVA.
All as Srl per item No.28.00 here-in-before but for DG Set of capacity from 20 KVA / 30 KVA.
Dismantling the defective water pump (coolant pump) assembly and Supply and fix new water pump assembly suitable for existing DG set of capacity 400 KVA to 500 KVA complete all as specified and directed by Engr-in-Charge.
All as Srl per item No.33.00 here-in-before but for DG Set of capacity 200 KVA to 320 KVA.
All as Srl per item No.33.00 here-in-before but for DG Set of capacity 100 KVA / 125 KVA.
All as Srl per item No.33.00 here-in-before but for DG Set of capacity 62.5 KVA /75 KVA/ 82.5 KVA.
All as Srl per item No.33.00 here-in-before but for DG Set of capacity 20 KVA / 30 KVA.
Dismantling the defective fuel injectors & FIP from the engine and Material & Labour for repair/calibration of fuel injectors & FIP including replacement of barrel, plunger, spring & ‘O’ rings etc. for DG Set of capacity 400 KVA to 500 KVA complete all as specified and directed by Engineer-in-Charge.
All as per Srl item No.38.00 here-in-before but for DG Set of capacity 200 KVA to 320 KVA.
All as per Srl item No.38.00 here-in-before but for DG Set of capacity 100 KVA / 125 KVA.
All as per Srl item No.38.00 here-in-before but for DG Set of capacity 62.5 KVA / 82.5 KVA/75 KVA
All as per Srl item No.38.00 here-in-before but for DG Set of capacity 40 KVA / 50 KVA.
All as per Srl item No.38.00 here-in-before but for DG Set of capacity 20 KVA to 30 KVA.
Supply only lube oil super bypass filter for 200 to 250 KVA DG Set, complete all as specified and directed.
Supply only lube oil super bypass filter for 400 KVA to 500 KVA DG Set, complete all as specified and directed.
Taking down unserviceable lube oil pressure sender and Supply and fix Lube Oil Pressure Sender (Sensor + Switch) suitable for DG set of capacity 400 KVA to 500 KVA, complete all as specified and directed by Engineer-in-Charge.
All as per Srl item No.46.00 here-in-before but for DG Set of capacity 100 KVA to 320 KVA.
All as per Srl item No.46.00 here-in-before but for DG Set of capacity up to 82.5 KVA.
Dismantling the fly wheel coupling between engine and alternator and Supply and replace complete set of bullet rubber bushes, coupling nuts & bolts including proper alignment of engine & alternator for smooth running for DG set of capacity 200 KVA to 320 KVA, complete all as specified and directed by Engineer-in-Charge.
All as per item No. 49.00 here-in-before but for DG set of capacity 100 KVA / 125 KVA.
All as per item No.49.00 here-in-before but for DG Set of capacity up to 82.5 KVA.
Dismantling the defective 24 V battery charging alternator carefully from any capacity of DG set and carryout repair and servicing by cleaning all accessories with suitable cleaning agent and supply and replace carbon brush, brush holders, bushes/bearings, varnishing etc, re-assembling and re-fixing the same and testing on completion complete all as specified and directed by Engineer-in-Charge.
All as per item No.52.00 here-in-before but 12 V battery charging alternator for any capacity of DG set.
Supply and fix RPM Meter with cable suitable for DG Set including taking down of existing unserviceable meter complete all as specified and directed by Engineer-in-Charge.
Supply and fix Oil Pressure Gauge suitable for DG Sets including taking down existing unserviceable gauge complete all as specified and directed by Engineer-in-Charge.
Supply and fix Water Temperature Gauge suitable for DG Sets including taking down existing unserviceable gauge complete all as specified and directed by Engineer-in-Charge.
Supply and connect battery connecting cable (1.50m long each) made out of PVC Insulated Plain/Striped Automobile Cables with high conductivity bright annealed copper conductor bunched together, insulated with dielectric grade PVC compound (impervious to oils, greases, acids, petrol and water) conforming to IS 2465 of size 25 sqmm soldered one end with brass connector with nuts and bolts for battery pole and the other with copper lug for self starter terminal including taking down of existing u/s battery connecting cable with connector and lug of any description complete all as specified and directed by Engineer-in-Charge.
Supply and replace brass connector with bolt and nut suitable for positive/negative pole of battery of any size, complete all as specified and directed.
Taking down unserviceable engine wiring and Material & Labour for rewiring of engine safety control system from control panel to engine control gadgets like HWT, LLOP, shut down valve, dynamo & self-starter etc with suitable gauge and grade of wires for DG set of capacity from 400KVA to 500 KVA complete all as specified and directed by Engineer-in-Charge.
All as per item No.59..00 here-in-before but for DG Set of capacity from 100 KVA to 320 KVA.
All as per item No.59.00 here-in-before but for DG Set of capacity up to 75 KVA.
Dismantling the defective self starter assembly 12V/24V carefully from the DG set and carryout repair and servicing by cleaning all accessories with suitable cleaning agent and supply and replace commutator, carbon brush set, carbon brush holder, king pin holder, armature choke nut, body screens, clutch plate assembly and solenoid etc, re-assembling and re-fixing the same and testing on completion for DG set of capacity from 400 KVA to 500 KVA complete all as specified and directed by Engineer-in-Charge.
All as per item No.62.00 here-in-before but for DG Set of capacity from 100 KVA to 320 KVA.
All as per item No.62.00 here-in-before but for DG Set of capacity up to 82.5 KVA.
Supply and replace battery 12V, 180 AH with 24 months full replacement warrantee for DG set including initial filling & charging complete all as specified and directed by Engineer-in-Charge.
All as per item No. 65.00 here-in-before but of rating 12V, 130 AH
All as per item No. 65.00 here-in-before but of rating 12V, 100 AH
All as per item No. 65.00 here-in-before but of rating 12V, 80 AH
Dismantling the defective alternator from DG set, transporting to civil work shop, separating the stator and rotor from alternator housing, cutting and removing burnt winding of stator completely, cleaning the slots and rewinding the stator with existing gauge of super enamelled copper wire with suitable grade of insulation, applying varnish and heating in heating chamber till completely dried and reassembling the alternator, transporting back to site and re-fixing to the DG set including proper alignment for smooth running and testing on completion for DG set of capacity 400 KVA to 500 KVA complete all as specified and directed by Engineer-in-Charge.
All as per item No. 69.00 here-in-before but for DG set of capacity 200 KVA to 320 KVA.
All as per item No. 69.00 here-in-before but for DG set of capacity 100 KVA / 125 KVA.
All as per item No. 69.00 here-in-before but for DG set of capacity 75 KVA /82.5 KVA.
All as per item No. 69.00 here-in-before but for DG set of capacity 30 / 62.5 KVA.
All as per item No. 69.00 here-in-before but for DG set of capacity 15 to 20 KVA.
Supply and fix in replacement of left hand/ right hand hinge suitable for acoustic enclosure doors for DG set of any make and capacity 400 KVA to 625 KVA including removing of existing broken hinge complete all as specified and directed by Engineer-in-Charge.
All as per item No. 75.00 here-in-before but for DG set of capacity 100 KVA to 320 KVA.
All as per item No. 75.00 here-in-before but for DG set of capacity up to 82.5 KVA.
Supply and fix in replacement of MCCB, 630 A, 3 Pole, 50 KA (Ics=100%Icu), 415 V, 50 Hz, with adjustable thermal magnetic release along with busbar spreader terminal plates including taking down existing unserviceable MCCB of any description complete all as specified and directed by Engineer-in-Charge.
Supply and fix in replacement of MCCB, 400 A, 3 Pole, 50 KA (Ics=100%Icu), 415 V, 50 Hz, with adjustable thermal magnetic release along with busbar spreader terminal plates including taking down existing unserviceable MCCB of any description complete all as specified and directed by Engineer-in-Charge.
Supply and fix in replacement of MCCB, 250 A, 3 Pole, 36 KA (Ics=100%Icu), 415 V, 50 Hz, with adjustable thermal magnetic release along with busbar spreader terminal plates including taking down existing unserviceable MCCB of any description complete all as specified and directed by Engineer-in-Charge.
Supply and fix in replacement of MCCB, 160 A, 3 Pole, 36 KA (Ics=100%Icu), 415 V, 50 Hz, with fixed thermal magnetic release along with busbar spreader terminal plates including taking down existing unserviceable MCCB of any description complete all as specified and directed by Engineer-in-Charge.
Supply and fix in replacement of MCCB, 25 to 100 A, 3 Pole, 16 KA (Ics=100%Icu), 415 V, 50 Hz, with fixed thermal magnetic release along with busbar spreader terminal plates including taking down existing unserviceable MCCB of any description complete all as specified and directed by Engineer-in-Charge.
Supply only Voltage Regulator (AVR) suitable for DG set of capacity 100 KVA to 125 KVA , complete all as specified and directed.
Supply only Voltage Regulator (AVR) suitable for DG set of capacity 82.5/62.5/30/20 KVA, complete all as specified and directed.
Supply only battery lead, complete all as specified and directed.
Supply only battery terminal made of brass, complete all as specified and directed.
Supply only Benjo bolts of suitable sizes, complete all as specified and directed.
Supply only Radiator hose flexible suitable for the following DG sets, complete all as specified and directed:-
15 KVA to 30 KVA
62.5 KVA to 82.5 KVA
100 KVA to 125 KVA
200 KVA to 250 KVA
400 to 500 KVA
Supply only Hose plain for water pump suitable for the following DG sets, complete all as specified and directed:-
15 KVA to 30 KVA
62.5 KVA to 82.5 KVA
100 KVA to 125 KVA
200 KVA to 250 KVA
400 KVA to 500 KVA
Supply only Lube oil pressure gauge of suitable range, complete all as specified and directed.
Supply only starter motor assembly for 100 KVA to 400 KVA, 12 / 24 volt DC, complete all as specified and directed.
Supply only A series electronic timers on delay function with time range 0.3S to 30 Min, complete all as specified and directed.
Supply only B series electronic timers adjustable cyclic function 240 Volts AC suitable for AMF panel, complete all as specified and directed.
Supply only ON DELAY TIMERS (for STOP/START/LOP/LOT/FAULT etc) Time range 3 sec to 30 hours contact 5 Amps 240V/12-24 volts DC, complete all as specified and directed.
Supply only HRC fuses of capacity 4-20 Amps, complete all as specified and directed.
Supply only HRC fuse cartridge assembly both base and top 20A rating, complete all as specified and directed.
Supply only indicator lamps DC filament type, complete all as specified and directed.
Supply only indicator lamps AC 230 Volt LED Type for the panel boards, complete all as specified and directed.
Supply only push button with contact element 5 A with NO-NC, complete all as specified and directed.
Supply only Ammeter as per sample of range 0-30/50/100 Amps AC for control/AMF panel, complete all as specified and directed.
Supply only Volt Meter as per sample of Range 0-600 Volts AC, complete all as specified and directed.
Supply only main 3P/4P contactor for AMF panel as required for 75 KVA to 100KVA DG set, complete all as specified and directed.
Supply only main 3P/4P contactor for AMF panel as required for 125 to 200KVA DG set, complete all as specified and directed.
Supply only main 3P/4P contactor for AMF panel as required for 250 KVA DG set, complete all as specified and directed.
Supply only contactor(neutral control) for AMF panel, model MNX 32 of 125 KVA DG set, complete all as specified and directed.
Supply only main contactor for AMF panel model TCA3-M40 of 30/45/62.5 KVA DG set, complete all as specified and directed.
Supply only main contactor 4P for AMF panel model MCX 11, 50 Amps for 20/30/62.5 KVA DG set, complete all as specified and directed.
Supply only contactor 4P for AMF panel model MCX 47 , 800 Amps for 400/500 KVA DG set, complete all as specified and directed.
Supply only contactor 4P for AMF panel model MCX 43 , 400 Amps for 200/320 KVA DG set, complete all as specified and directed.
Supply only auxiliary /control contactors of suitable contactor(2NO, 02NC) of suitable ratings for AMF Panel, complete all as specified and directed.
Battery Charging Unit (external type) 12 / 24 Volts suitable to charge batteries ranges from 80 AH to 150 AH, complete all as specified and directed.
S&F Battery charger 12 v /24 v SMPS(System main power supply) type control unit assembly fitted with AMF Panel, complete all as specified and directed.
Supply only ignition key suitable for DG set panel/control panel, complete all as specified and directed.
Supply only Energy meter 3 phase, 4 wire, 20-40 Amps range microprocessor based, complete all as specified and directed.
Supply only voltage monitoring regulator (UV, OV, SP) of suitable ratings for AMF panels, complete all as specified and directed.
Servicing of AMF panel / Engine Control Panel of DG sets of various capacities by blowering, cleaning the complete panel with suitable cleaning agent and checking the controller relays, timer, contactors for proper functioning, replacing the defective spare parts, replacement of defective small wires of existing size, tightening of all connections and applying jelly on contactors complete all as specified and directed by Engineer-in-Charge. Note : Spare parts required shall be measured and paid separately as 'Supply Only' but cost of small wires shall deemed to be included in the quoted rate.
Supply only of following spare parts suitable for existing DG set AMF Panels, 3 Phase, 415 Volts, 50 Hz, complete all as specified and directed :-
AMF relay complete assembly with digital display suitable for 320 KVA to 500 KVA DG set
AMF relay complete assembly with digital display suitable for 100 KVA to 250 KVA DG set
AMF relay complete assembly with digital display suitable for up to 82.5 KVA DG set
Microprocessor Based Genset Engine Controller for metering, monitoring, protecting and electronic governing of the engine suitable for 320 KVA to 500 KVA DG set, complete all as specified and directed.
Microprocessor Based Genset Engine Controller for metering, monitoring, protecting and electronic governing of the engine suitable for 100 KVA to 250 KVA DG set, complete all as specified and directed.
Microprocessor Based Genset Engine Controller for metering, monitoring, protecting and electronic governing of the engine suitable for up to 82.5 KVA DG set, complete all as specified and directed.
Supply only Multifunction digital meter (in lieu of voltmeter, ammeter, Pfmeter) suitable for new version AMF panel, complete all as specified and directed.
Supply only in replacement of PVC insulated unsheathed multi stranded copper conductor cable FRLSH as per IS-694 for sizes, complete all as specified and directed. :-
Labour only for attending DG set complaints, checking fault in engine control wiring / genset controller / engine controller / AMF panel, LT panel etc and rectifying the fault by replacing defective spare parts by deploying engine technician / AMF panel technician / electrician etc as per site requirement at any time on any day including Sunday and Holiday complete all as specified and directed by Engineer-in-Charge. Note: Spare parts required shall be measured and paid separately. However, cost of minor spare parts costing up to Rs. 500 shall deemed to be included in the quoted rate. Contractor should arrange the technician within 02 hours of intimation of complaint by JE E/M / Engineer-in-Charge and the complaint should be rectified as soon as possible but not later than 08 hours from the time of intimation. If contractor fails to arrange the technician and rectify the complaint within the specified time, a penal recovery of Rs. 500 per hour of delay beyond the specified time limit will be made from contractor's dues.
S&F in repairs Change over switch suitable from 200 KVA to 400 KVA DG set (with enclosure), complete all as specified and directed.
S&F in repairs Change over switch suitable for 62.5 kva to 125 KVA DG set (with enclosure), complete all as specified and directed.
Supply, laying, connecting and testing of XLPE insulated, PVC sheathed, galvanized steel strip or wire armoured, stranded aluminium conductor cable of size 300 Sqm, 3.5 core including taking down of existing unserviceable cable of any description complete all as specified and directed by Engineer-in-Charge.
All as per item No. 123.00 here-in-before but of size 185 Sqm, 3.5 core
All as per item No. 123.00 here-in-before but of size 95 Sqm, 3.5 core
All as per item No. 123.00 here-in-before but of size 50 Sqm, 3.5 core
All as per item No. 123.00 here-in-before but of size 25 Sqm, 4 core
Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts, complete all as specified and directed by Engineer-in-Charge.
Supply and spread clean dry river sand in trenches for cushioning of cable complete all as specified and directed by Engineer-in-Charge. Note: Punned down thickness only shall be measured for the purpose of payment.
Supply and laying in trenches, un-reinforced precast concrete cable cover, ISI marked, Class LV, Type I, flat, size 250 mm x 150mm x 40mm for cable protection in trenches complete all as specified and directed.
S & F in repairs Ductile Iron Pipes 150 mm bore Ductile Iron Pipes centrifugally cast (spun) including jointing in standard length, with flanged ends, Class "K9" conforming to IS 8329-2000 (latest version) in any length laid in trenches including taking down unserviceable old one, complete all as specified and directed.
S & F in repairs Ductile Iron Pipes 100 mm bore Ductile Iron Pipes centrifugally cast (spun) including jointing in standard length, with flanged ends, Class "K9" conforming to IS 8329-2000 (latest version) in any length laid in trenches including taking down unserviceable old one, complete all as specified and directed.
Supply & fix DI fittings in repairs (pressure class K-9) such as bends, (any type, radius and angle), Tapers any type (straight bend, increasing, decreasing or double socket etc) Tee piece single branch "Y" junction double branch, cross (all socket or socket and spigot) collars, caps and plugs of size up to 200mm bore confirming to IS 9523-2000 including taking down unserviceable old one , complete all as specified and directed.
Material and labour in repairs for framed work such as valve chamber covers, static tank cover, base frames for pump sets, protection covers for pump sets/panel boards, staging for water tank , ladders etc, complete all as specified and directed.
M & L for pressure testing of existing CI / DI / MS of water supply / fire lines of 150 mm dia for identifying leakages for rectifications including replacement of gland packing of sluice valves, rubber insertion packing, nut ,bolts etc of flanged joints / defective flanges etc complete for making the system leak proof complete all directed by Engineer-in-charge. Note:- (a) The quoted rate shall deemed to be inclusive of T&P such as air compressor for pressure testing etc (b) Earthwork, DI / MS pipe & specials required for rectification if any shall be measured and paid separately under relevant items BOQ. (c) Pressure test will be carried out either complete network or partial pipelines of any size / distance as per ground requirement.
M & L for arresting water leakage from sluice valve of following sizes, by refacing, regrinding of sluice Valve, Repacking stuffing box of sluice valve spindle including taking apart and reassembling the same including replacing old check nuts with new one made out of MS / CI material, with and including replacing perished gland packing, rubber gasket, bolts and nuts, complete all as specified and directed:-
80 mm dia bore
100 mm dia bore
150 mm dia bore
M & L for replacement of Double Headed, GUN METAL Fire Hydrant Landing Valve of Type B of size 63 mm dia including all Joints and Jointing Materials, complete all as specified and as directed.
M & L for replacement of Single Headed, GUN METAL Fire Hydrant Landing Valve of Type A of size 63 mm dia including all Joints and Jointing Materials, complete all as specified and as directed.
M & L for replacement of GUN METAL branch pipe 63mm dia instantaneous inlet, made traded outlet, 15mm bore nozzle short complete including removing existing unserviceable one, complete all as specified and directed.
M & L for replacement of Single Headed, SS Type, Fire Hydrant Landing Valve of Type A of size 63 mm dia including all Joints and Jointing Materials, complete all as specified and as directed.
M & L for rectification of existing defective / leakage flanged joints with rubber or fibre gasket complete with necessary nuts, bolts and washers all as specified for 80 mm dia pipe lines of DI / MS / GI pipes complete all as directed. Note:- (a) The quoted rate shall be inclusive of cutting of DI / MS / GI Pipes, jointing materials and preparation of new flanged sockets and re fixing the same at existing place. (b) Necessary excavation and pipes shall be measured and paid separately
All as per item No 141 above but for 100 mm dia pipe
All as per item No 141 above but for 150 mm dia pipe
All as per item No 141 above but for 200 mm dia pipe
Material and labour for PCC (1:3:6) type C1 using 20 mm graded stone aggregate as a base foundation / making pedestals for the pipelines including one coat of white wash and necessary form work , complete all as specified and directed.
Supply and fix in reair flanged end lift type Foot valve 150 mm dia (Strainer for suction) with brass strainer, suitable flanges, nuts, bolts, gaskets etc, complete all as specified and directed.
Supply and fix in reair flanged end lift type Foot valve 100 mm dia (Strainer for suction) with brass strainer, suitable flanges, nuts, bolts, gaskets etc, complete all as specified and directed.
Supply and fix in reair flanged end lift type Foot valve 80 mm dia (Strainer for suction) with brass strainer, suitable flanges, nuts, bolts, gaskets etc, complete all as specified and directed.
M & L for taking down & re fixing the old fire hydrant valves of size 80mm dia from hydrant post by removing the corrosion, changing the damaged pins from pivot end, softening the shaft of iron wheel and applying the grease for lubrication of fire hydrant valves, complete all as specified and directed. Note : The quoted rate shall be inclusive of Nut & Bolts and other connected items.
M & L for repair/ maintenance of fire hose box by changing of damaged doors along with locking arrangements, front glass of existing size and necessary rubber gaskets for doors, complete all as specified and directed. Note:-The quoted rate shall be inclusive of one coat red-oxide paint, paint red and inside clean white paint.
S & F in repairs of defective/ unserviceable 15 mtrs long percolating canvas hose of 80/63mm dia CP male and female coupling conforming to IS 903, complete all as specified and directed.
S & F in repairs of damaged / defective / unserviceable first aid hose reel hose with 19mm bore 30 mtrs, hose reel tubing Rubber hose IS:884- 1985, shut off valve and 4.6mm dia nozzle as per IS 8090 1976, manufactured as per IS 884/85, complete all as specified and directed.
Supply, and replace defective/ unserviceable four way fire brigade inlet with isolation valve with instantaneous gun metal coupling 63mm dia complete all as per fire standards made out of 150mm dia class 'B' MS pipe, complete all as specified and directed.
Supply and replace Fire Hose cabinet of size 800 mm x 600 x 250 mm made out of 18 gauge MS Sheet with double door having 4 mm thick glass marked with "FIRE POINT AND IN CASE OF FIRE BREAK THE GLASS" in signal red paint for keeping the fire hoses nozzles etc., The MS Sheet cabinet shall be painted with a coat of zinc chrome primer and two coats of postal red colour epoxy paint outside and brilliant white inside of approved make and installed near the stand post type hydrant, complete all as specified and as directed.
Supply and fix sluice valve of class PN 1.6 dia 150mm (6") IS complete including inserting and jointing material bolt, nuts and gasket after dismantling and taking out unserviceable sluice valve, complete all as specified and directed.
Supply and fix sluice valve of class PN 1.6 dia 100mm (4") IS complete including inserting and jointing material bolt, nuts and gasket after dismantling and taking out unserviceable sluice valve, complete all as specified and directed.
Supply and fix sluice valve of class PN 1.6 dia 80mm (3") IS complete including inserting and jointing material bolt, nuts and gasket after dismantling and taking out unserviceable sluice valve, complete all as specified and directed.
Supply and fix in repair water pressure gauges of 0-14 kgs standard dia at delivery side of pump sets complete with connecting tubing, fitted with stop cocks etc, complete all as specified and directed.
M & L Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and as directed.
M & L for cleaning of vegetation by using excavator for removing bushes / thick vegetation around the pump house, installations, levelling the area without damaging the pipelines / Cable network / Pedestals of pipelines / buildings including disposal of the vegetation / debris material up to a distance not exceeding 50 m complete all as specified and directed by Engineer-in-Charge.
Supply and replacement of single hydrant stand post made of MS pipe of size 80 mm bore heavy grade, 1.20 m to 1.5 m height with 90°, duck foot bend both end flanged and including welding if required to suit single fire hydrant valve and testing complete all as specified and directed by Engineer - in - Charge.
Supply and Fix in replacement "Fire Hydrant Blanking Cap of PVC for closing the fire hydrant valves of 63/80 mm dia complete along with chain all as specified and directed by Engineer - in - Charge.
Supply and Fix in replacement "Fire Hydrant Hand Wheel" for closing the fire hydrant valves of 63/80 mm dia complete all as specified and directed by Engineer - in - Charge.
Supply and Fix in replacement "Fire Hydrant Female Coupling Washers of both ends" suitable of 63 mm dia complete all as specified and directed by Engineer - in - Charge.
Supply and Fix in repair Female outlet (Adapter) Gun metal in existing Hydrant valve (both type A and B) of size 63mm all as specified and directed by Engineer-in-Charge
Material and labour for taking down defective foot valves of 150/100mm sizefrom UG Sump, removing corrosion and painting with one coat of red oxide along with black enamel paint and replacing rubber gaskets, foot valve bottom rubber with spring complete with renewal of necessary bolts, nuts, washers etc, complete all as specified and directed.
M & L Synthetic mat (rubber matting) suitable for 1100 Volts electrical grade 2mx1mx19mm thick chequered top, ISI marked to be laid in front of LT panel board, complete all as specified and directed.
M & L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius built in Cement mortar 1:4, complete all as specified and directed.
Supply only MS pipe 200mm dia bore, heavy grade laid in trenches or on ground / vertically with welded joints including removing the rusted, broken old MS pipe, complete all as specified and directed.
Supply only MS pipe 150mm dia bore, heavy grade laid in trenches or on ground / vertically with welded joints including removing the rusted, broken old MS pipe, complete all as specified and directed.
Supply only MS pipe 100mm dia bore, heavy grade laid in trenches or on ground / vertically with welded joints including removing the rusted, broken old MS pipe, complete all as specified and directed.
Supply only MS pipe 80mm dia bore, heavy grade laid in trenches or on ground / vertically with welded joints including removing the rusted, broken old MS pipe, complete all as specified and directed.
Excavation in trenches in soft/loose soil n.exc. 1.5M wide & n exc 1.5M deep for laying of GI/CI pipe line & getting out including forming bottom surface, complete all as specified and directed.
Returning, filling in, trenches including spreading, levelling, watering and well ramming in layer n.exc. 250 mm in any type of soil after the pipe laid & tested, complete all as specified and directed.
Removing excavated surplus soil to a distance n.exc. 50mtr and depositing where directed at a level n.exc. 1.5 m above the starting point, complete all as specified and directed.
SCHEDULE OF CREDIT Note :- Amount of Rs. 1,07,627.50 indicated in Tender Documents as Schedule of Credit shall be deducted from the total quoted amount of BOQ.
SATYAM ENGINEERS (BID ID -3410582)
M/S SRI VENKATA BHAVANI CONSTRUCTIONS (BID ID -3410102)
lakshmi Engineering Works (BID ID -3413936)
CHAITANYA CONSTRUCTIONS (BID ID -3410772)
GVR CONSTRUCTIONS (BID ID -3412276)
M/S CHANDRA ENGINEERS AND CONTRACTORS (BID ID -3413875)
SRI MAHALAKSHMI CONSTRUCTIONS (BID ID -3411047)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .