Building Work

Providing Accessibility Facilities for Persons with Disabilities (Divyangjan) at Government

Polytechnic, Navsari.

BILL OF QUANTITIES

Percentage Rate Tender

Item Description of Item Quantity Unit Rate In Amount

1 Dismentling steel work including distempering and 540.00 Kg 3.76

stacking the materials with all lead and lift.

2 Dismentling doors, windows, ventilators etc. (wood 11.00 Nos 192.41

or steel) shutters including chowkhats architraves,

holdfasts and other attachment etc. complete and

stacking them within all lead and lift.(i) Not

exceeding 3 Sq.M. in area.

3 Dismantling santtary fittings like wash basin . W.C. 10.00 Nos 415.79

pan Indian and European type, flushing tank etc.

including stacking the materials with all lead and lift.

4 Dismentaling tiled of stone floors laid in mortar 73.26 Sqmt 49.41

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and

5 Dismentaling of sheet roofing including ridges, Hips, 673.00 Sqm 49.41

Valleys, Gutters etc. stacking of serviceable materilas

and disposal of unserviceable materials with all lead

and lift.(ii) G I. sheet

6 Demolition including stacking of serviceable 9.68 Cumt 1084.30

materilas and disposal of unserviceable materials

with all lead and lift. (i) R.C.C. work

7 Providing and Fixing 6 mm thick Lexan 673.00 Sqm 1441.90

Polycarbonate multi wall roofing sheet fixed with

hilti screw and rubber silicon sealer and alluminium

strip of size 50 x 3 mm etc complete as directed by

Engineer in charge.

8 Providing and erecting double scaffolding / staging 2352.00 Sqmt 121.20

using Cuplock system with verticals, horizontals,

ledgers, transoms, adjustable base plates, U-heads,

steel planks, guard rails, toe boards, access ladders

and all necessary fittings, including erection,

dismantling and transportation complete as directed

by Engineer-in-Charge.

9 Steel work, welded in built up sections framed work 4205.00 Kg 91.08

including cutting, hoisting, fixing in position and

applying a priming coat of red lead paint. (A)In

beams and joists, channels angles Tees, flats, with

connecting plates or angle cleats as in main and cross

beams. Hip and jack rafters, purlins conneted to

common rafters and the like

10 Painting one coats (excluding priming coat) on 1125.00 Sqmt 38.48

previously printed steel and other metal surface with

synthetic enamel paint, brushing to give an even

shade including cleaning the surface of all dirt, dust

and other foreign matter.

Item Description of Item Quantity Unit Rate In Amount

11 Providing and fixing FRP frame size 125x65 mm and 15.12 Sqmt 2019.98

35mm thick FRP shutter with wood grain raised

panneled design finish shutter having extra

reinforcement on sides & edges in Gel coat finish. The

core of the shutter & frame is to be filed up with

injected polyurethene foam done in situ alongwith

embedded wooden pieces for stiffening & also taking

hinges & fintures. The whole FRP frame & shutter is

to be water proof weather proof, termite proof &

resistance to mild acid/alkali. Rates are to be

inclusive of S.S hinges with fastener sleeve &

alluminium fixtures & fastenings.

12 Providing and laying Ceramic tiles 6mm thick in 73.26 sqmt 994.32

flooring treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1-cement : 3-coarse

sand ) finishing with flush pointing in white cement.

13 Providing and fixing 90 cm high Stainless steel railing 174.00 rmt 2848.20

made from anticorrocive 304 grade S S pipe of

mm dia (16Gauge) as hand rail with S S 304 grade

Baluster of 38 mm dia (16Gauge) as a vertical

support fixed in RCC slab at 1.2m c/c including

three horizontal S S pipes of 25 mm dia (16Gauge) at

eqal distance fixed by 18.75 mm dia (16Gauge) S S

pipe with baluster including accessories as per

detailed drawing as directed etc. complete.

14 Providing and fixing coloured self adhesive PU- 617.25 Sqm 4586.41

Tactile tile, ground surface indicators of

Polyurethane) of size 300mm x 300mm for

guiding/warning to the visually visitors in the

centre/side of the pedestrian/approach pathway as

per specification and guidelines complete in all

respect to the entire satisfaction of in charge.

15 Providing and fixing acrylic multilingual Braille 400.00 Nos 1696.80

(raised dots) DIRECTIONAL SIGNBOARDS of size

x 150mm designed as per accessibility standards

and having 3.5mm thick acrylic base plate with

Upper Case San Serif words made of white acrylic

non glare cut out letters of height 15mm raised not

less than 0.8mm above base plate and the equivalent

word written in Hindi with Devanagari non glare

acrylic letters of height 15mm raised not less than

0.8mm above base plate and having a non-glare

acrylic cut arrow pointing in the required direction.

Each signboard to be fixed as per manufacturers

specifications on the wall at the approved location

and at a height of 1200mm from FFL complete as per

design / specifications and guidelines as per the

entire satisfaction of the Engineer-in-charge

Item Description of Item Quantity Unit Rate In Amount

16 Providing & Fixing tactile layout plan of size 900mm 5.00 Nos 33027.00

x 600mm as approved design, made of 3.0mm thick

acrylic non glare base plate and non glare cut out

symbols with Braille on which individual facility

points, like inquiry, reception, restrooms, medical

room / first aid, cafeteria or breakout area, lounge,

meeting room, conference room etc. present the

respective floors with pictograph wherever needed

all in tactile raised by minimum of 1.0mm to 2mm in

various colours to make it legible for seniors, partial

vision impaired etc. All the facility names should be

in Braille, along with English or Hindi. The entire

block of tactile signs should be mounted on wall for

easy reading. The map to be installed at specified

locations and installed at a height of 800mm from

ground level complete in all respect as per

Harmonized guideline & satisfaction of Engineer in

17 Providing and fixing of acrylic, non-glare, tactile 5.00 Nos 43480.50

audio pictorial building layout as per the approved

size, design and make, having 3mm thick acrylic non

glare base plate of the approved colour and non-

glare acrylic cut out symbols raised 3mm above base

plate and Grade 2/ Grade 1 Braille to be integral with

the sign face and be raised 0.5mm above base plate.

The map to be installed at the specified location as

per accessibility standards, shall be oriented to the

position of the viewer and to be installed at a height

of 800 mm from the finished ground/ floor level and

using the necessary hardware specified by the

manufacturer and to be installed up to the height of

800 mm from the finished ground/ floor level and

using the necessary hardware specified by the

manufacturer and to be installed complete as per

design/specifications and guidelines as per the

entire satisfaction of the the Engineer-in-charge

18 Providing & fixing Braile indicator of size 170 mm x 120.00 rmt 820.12

35mm for handrails of the approved design and

make have braile dots raised 0.5 mm above base

plate to be installed at specific locations as per

direction of engineer in charge

Item Description of Item Quantity Unit Rate In Amount

19 Providing and Fixing 15 mm thick 300 mm x 300 mm 193.50 sqmt 1208.97

Tactile Warning Tiles (Attention Tiles i.e. Tactile

Warning Surface Indicator {TWSI}) of Johnsan

Endura Tac Button Yellow Plus or equvqlent make in

flooring laid on 20 mm thick cement mortar 1:6 (1

cement : 6 coarse sand) on new surface and jointed

with cement slurry including finished with flush

pointing & cleaning the surface for all floors as per

detailed drawing etc. complete as directed by

Architect or Engineer in charge. Thse tiles shall be

Anti Skid, Chemical Resistant, Fade Proof, Frost -

Heat & Weather Proof, High Flexural Strength, Highly

Durable, Stain Resistance . All Tactile Warning Tiles

meet the specific size and dimension standards as

required by ISO/FDIS

20 Providing and Fixing a set of wall mounted 38 mm 6.00 Nos 5090.40

dia U shaped horizontal stainless steel collapsible

grab bar , 38mm vertical stainless steel fixed grab

rail of grade SS 304 from round pipe supported and

75 mm dia 8 mm thick SS 304 base flange on wall

including anchor fasteners, nuts, accessories as per

detailed drawing etc. complete as directed by

Architect or Engineer in charge.

21 Providing and fixing stainless steel grab 22 cm x 60 6.00 Nos 1515.00

cm on door and handicapped toilet including all

fixture and accessary etc completed as per directed

engineer in charge.

22 Providing and fixing Wall Mounted Inverted L 6.00 Nos 6060.00

Shaped Grab Bar 700 MM handicapped toilet

including all fixture and accessary etc completed as

per directed engineer in charge.

23 Providing and fixing wash down water closet 6.00 Nos 2983.54

(European type W C pan) with integral P and S trap

including jointing the trap with soil pipe in cement

mortar 1:1 (1 cement five sand) including providing

and fixing plastic seat cover for wash down WC with

CP brass hinges and rubber buffers back plastic seat

and including providing and fixing PVC flushing tank

with a pair of C I or MS bracket with complete fitting

such as lead valve siphon 15 mm dia brass ball valve

with polythene float CP brass handle unions and

couplings for connection with inlet out let and over

flow pipes 40 mm dia porcelain enameled flush bend

including cutting holes in walls and making good the

same connection the flush bend with cistern and

closet vitreous china.etc completed.

Item Description of Item Quantity Unit Rate In Amount

24 Providing and fixing washbasin with single hole for 6.00 Nos 2081.61

pillar tap with C.I. or M.S. brackets painted white

including sutting holes and making good the same

including Brass waste, and M I fisher union fittings

including pvc connection and waste pipe & all

necessary fittings For All Floor (A) Vitreous China:(ii)

Flat Back washbasin 550 mm x v 400mm size. (i) In

25 Providing and fixing 600mm x 450mm bevelled edge 6.00 Nos 851.13

mirrror of superior glass mounted on 6mm thick A.C.

sheet or plywood sheet and fixing to wooden pluge

with C.P. brass screws and washers.

26 Providing and fixing screw down bib taps of 6.00 Nos 186.83

following size.(A) Brass screw down bib tap polished

bright. (i) 15mm dia.

27 Providing and fixing screw down bib taps of 6.00 Nos 214.81

following size.(A) Brass screw down bib tap polished

bright. (ii) 20mm dia.

28 Providing laying and jointing in true line and level 150.00 Rmt 148.12

40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

29 Providing laying and jointing in true line and level 150.00 Rmt 91.84

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

30 Providing and fixing wall-mounted double-layer soap 6.00 Nos 707.00

holder and dispenser, made from high-quality,

corrosion-resistant stainless steel or durable ABS

plastic As per Eng-in-Charge.

31 P & L 24" x 24" vitrified 8 mm thick tile flooring over 144.00 sqmt 1432.78

20 mm (average) base of cement mortar 1:6 (

cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including

dismentaling of existing flooring and jointed with

color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for

32 Providing and fixing pre-cast Rubber Dye / steel Dye 74.00 sqmt 704.07

inter locking concrete block 60mm thick with grade

of concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design Confirming

to IS 15658 : 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line

and level as per guidlines of IRC : SP 63-2018 etc.

Item Description of Item Quantity Unit Rate In Amount

33 Constructing brick masonry road gully chamber 10.00 Nos 8767.25

1100mm x 775mm including 500mm x 450mm (C.I.

horizontal grating with frame and vertical grating

34 Providing and fixing standared extruded of 1.08 sqmt 1175.56

alluminium section of size 63mm x 38.10mm x

1.2mm @ Wt. 0.643 Kg/mt with colour anodized

alluminium frame for ventilation with 5 mm thick

frosted glass as details etc complete for Ventilation

35 Excavation for foundation upto 1.5 m depth including 9.63 Cum 120.10

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter

lead.(A) Loose or soft soil

36 Providing and laying cement concrete 1:3:6 (1- 2.40 Cum 3080.90

Cement : 3- coarse sand : 6- machine cut stone

aggregates 40 mm nominal size) and curing complete

excluding cost of formwork in (A) Foundation and

37 Providing and laying controlled cement concrete 5.00 cum 3927.43

M.150 for curing complete excluding cost of

formwork and reinforcement for reinforced concrete

work in (A) Foundations, footings,Base of columns

and Mass concrete for PCC

38 Providing and fixing of Ridge flashing for roof panel 24.00 Sqm 867.38

shall be made out of 0.5 mm thick pre coated GI sheet

. The Precoated sheet shall be of minimum 240 mpa

steel grade confirming to IS 14246:1995 and shall

have zinc coating of minimum 120 gsm as per

IS:277:1992 , 5-7 microns epoxy primer on both side

of the sheet and polyester top coat 15-18 micron.

The PPGI Sheet shall have plastic protective guard

film of minimum 25 microns to avoid scratches

during transportation. The ridge shall be fixed to the

steel members by pop rivet or self drilling/self

stitching fastners @ maximum 450 mm c/c along

length of capping/flashing etc complete .

39 Replacing old & u/s by Providing following type of 24.00 Ea. 151.50

Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected with necessary connections as per

site situation directed by Engineer In charge, (1)One

No. SP 6 Amp., Cat.III

40 Replacing old & u/s by Providing following type of 8.00 Ea. 151.50

Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected with necessary connections as per

site situation directed by Engineer In charge, (2) One

No 5 pin plug Cat.III

Item Description of Item Quantity Unit Rate In Amount

41 Replacing old & u/s by Providing following type of 8.00 Ea. 180.79

Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected with necessary connections as per

site situation directed by Engineer In charge, (9)

Amp. SP one way switch Cat.III

42 Replacing old & u/s by Providing following type of 8.00 Ea. 199.98

Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected with necessary connections as per

site situation directed by Engineer In charge, (10)

6/16Amp. Universal socket Cat.III

43 Supplying and erecting Flexible PVC insulated multi 12.00 Mtr. 58.58

strand multi core 1.1 kV grade ISI marked copper

wires of following size to be erected as directed. (e)

1.50 Sq.mm 3 core round PVC sheathed

44 Replacing old & u/s by Supplying and erecting LED 30.00 Ea. 295.93

indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used

as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to

270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges

shown.) (A) Tube Light with integral driver (iii) 18-

20 Watts, Surge - 2kV,IP-20, conventional 4 feet,

45 (A) Tube Light with integral driver (v) 36-40 Watts, 10.00 Ea. 535.30

Surge-2 KV, IP-20, conventional 4 feet Cat.III

46 Supplying and erecting led lamps with following 4.00 Ea. 112.11

wattage capacity of 220 to 240 voltage, minimum

15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable

for E14 / E27 / B22 lamp holders, pf >= 0.5, (A) LED

Lamps integral type, with PC diffuser suitable LAMP

holder, (ii) 5 to 8 watts, Cat.III

Item Description of Item Quantity Unit Rate In Amount

47 Supplying and erecting LED street light / Flood light 6.00 Ea. 4248.06

fittings with High power White LEDs wattage of

Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company

mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency >

85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Street Light (IP-65),

Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. (ii)

Providing andCat.III

erecting Miniature circuit breaker 6.00 Ea. 297.95

single pole 0.5A to 2A system and having breaking

capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark, Cat.III

49 Replacing old & u/s by providing and erecting 18.00 Ea. 123.22

Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark,

50 Providing & erecting 415 V MCB Four Pole for Motor 1.00 Ea. 736.29

& Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having

following capacity, (b)40 Amp., Cat.III

51 Providing and erecting HOT deep Galvanised iron 9.00 Kg 77.77

strip/wire 4.064mm to 1.626mm.

Item Description of Item Quantity Unit Rate In Amount

52 Supplying & erecting in earthpit of minimum bore 1.00 Ea. 7095.25

dia. 225mm size approved make Safe Earthing

Electrode consisting Pipe-in-Pipe Technology as per

IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-

200 Micron galvanising, Inner pipe dia of 40 mm

having 200-250 Micron galvanising, connection

terminal dia of 14 mm with constant ohmic value

surrounded by highly conductive compound with

high charge dissipation suitable for following type of

applications with chamber and heavy duty cover

(A)(approved make OEM has to submit test

certificate including value of earth resistance of

installation duly stamped and signed by agency and

officer Incharge has to ensure the value of earthing

resistane mentioned in test Certificate) & having

back filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 ohm / meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable

to retain moisture for long time Necessary test

report must be submitted by Agency. [B] For

Electrical installation up to 11 kV located in other

than normal soil i.e. Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of 25 Kg.

53 Providing and erecting FRLS-XLPE (IS:7098)(I)-88 150.00 Mtr. 151.50

ISI armoured cable multistrand / Solid Aluminium

conductor for 1.1 kV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables. (B) 4 core 6 Sq. mm

54 Providing and, fixing heavy duty flange type brass 12.00 Ea. 38.38

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables. (B)

to 4 core 6 Sq. mm

55 Replacing old & u/s by Supplying & erecting 18.00 Ea. 1703.87

approved make low noise decorative exhaust fan

having square frame ABS body with inbuilt lowers &

square frame. 250mm with 1350 RPM Cat.II

(Replacing-8, Providing-10)

56 Supplying & erecting approved make SMC press 6.00 Ea. 515.10

moulded composite FRP. loop-in, loop-out approx.

2mm thick box complete with Bakelite connector

strip 5way(3P+N+E),DIN rail for mounting mob &

hinged doors as per requirement having locking

arrangements with mounting clamp with nuts, bolts

& washers suitable for erection on pole with cable

clamps& earth bolt of following size of box. (B)

250mm x 200mm x 100mm [deep]

Item Description of Item Quantity Unit Rate In Amount

57 Supplying and erecting B class galvanised iron pipe 6.00 Ea. 343.40

32 mm outside dia 45 cm long duly welded on 20 cm

x 20 cm x 3 mm thick M.S. base plate, erected on wall

or corner for mounting street light luminaire with

necessary hardware materials duly painted.

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in

figures and words) of the estimated rate mentioned above. Amount of my /our

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

The Credit Value of Dismentalled Materials as per T.S of Amount Rs. 13091.24 (Electric Work+

1 Civil Work) shall be recovered from the 1st Running Bill of the Contractor.

The Contractor shall exhibit a board with detailed specification and details of work as directed by the

2 Engineer-In-Charge for which no extra payment shall be made.

3 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

4 Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.

5 items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate i.e. 6176/- per mt.

mentioned in all the tender.

Deputy Executive Engineer Executive Engineer

Navsari ( R & B ) Sub Division Navsari ( R & B ) Division

Navsari Navsari