Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.0 LAccepted-AOC D NO 71 31 252 DURGANAGAR MALKAPURAM VISAKHAPATNAM 530011 | VISAKHAPATANAM | ANDHRA PRADESH | 530011 | L1 | Accepted-AOC 1st Lowest | |
| 2 | L2₹20.2 L+₹94,741.80 (4.91%)Rejected-Finance DOOR NO 50 13 27 14 FLAT NO 14 PADMAJA APARTMENTS SEETHAMMAPETA VISAKHAPATNAM 530016 | VISAKHAPATNAM | VISAKHAPATNAM | ANDHRA PRADESH | 530016 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹21.3 L+₹2.0 L (10.4%)Rejected-Finance ASHOKA PARK PALLAVA PARK BVT INS VISHWAKARMA INDIAN NAVY OF GE ND VISAKHAPATNAM | VISAKHAPATANAM | ANDHRA PRADESH | 530001 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹21.5 L+₹2.2 L (11.3%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹22.5 L+₹3.2 L (16.6%)Rejected-Finance D NO 71 31 96 6 ASRR COLONY MALKAPURAM POST VISAKHAPATNAM 530 011 | VISAKHAPATANAM | ANDHRA PRADESH | 530011 | L5 | Rejected-Finance Not Lowest |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
25 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer P Navy Kalinga Visakhapatnam
Garrison Engineer P Navy Kalinga Military Engineer Services INS Kalinga PO Visakhapatnam 531 163
WELCOME MAINTENANCE AND PERIODICAL SERVICES TO CERTAIN BUILDINGS AND REPAIRS TO ROOF WPT, SUNKEN SLABS OF TOILETS, ALU/ WOODEN JOINERY, INTERNAL WATER SUPPLY LINES AND WASTE WATER PIPES, ROLLING SHUTTERS AT NAD BHEEMUNIPATNAM, VISAKHAPATNAM UNDER GE
2023_MES_591790_1
GE (P)/N/K/8021/23-24 OF 2023-24
Open Tender
Civil Works
Item Rate
270 days
Garrison Engineer P Navy Kalinga Visakhapatnam
Class E, Category a(i)
6 documents required · 6 mandatory
₹500
Garrison Engineer P Navy Kalinga Visakhapatnam
₹50,000
Yes
10 Jul 2023
27 Apr 2023
27 May 2023
27 Apr 2023
25 May 2023
11 May 2023
Amount
Taking down/dismantling loose/damage concrete including plaster of any description and in any position from RCC structures like chajja, fins, roof ceiling, louvers, parapet, column, beam, and of lintel by hammering with wooden mallets carefully chipping off the old concrete surface with necessary scaffolding including cutting of rusted reinforcement of Building height 10m with using proper Scaffolding and Staging. if so required and disposal of old debris to outside the premises complete all as specified and as directed.
Cleaning the existing surface of concrete and reinforcements as obtained after execution of item No. 01 here in before by wire brush including scrapping & cleaning with emery paper or by air blasting or sand blasting incl foreign martials , loose concrete/aggregate etc and washing down with water as required complete all as specified and as directed.
Removing of concrete all around reinforcement including from behind the reinforcing bars to give an average 25mm (but not less than 15mm clear air gap)by manual methods (using wire brushing ,chiselling etc) and applying alkaline rust removing chemical followed by removing rust including from behind the reinforcing bars by emery paper and cleaning the area thoroughly by water and allow it to dry all as per manufacturer's instruction to give it a totally rust free finished steel surface complete all as specified and directed by Engr-in-charge upto 25 mm dia bar.
M & L for providing single coat of epoxy bond adhesive of prepared non metallic surface (existing surface) and applying by brush all as per manufactures instruction/specification. The bonding agent shall have minimum compressive strength of 40 N/Sqmm and complete all as specified and directed by Engr-in-charge.
Supply and application of Epoxy Zinc rich primer on the prepared steel surface by brush the primer shall have a minimum specific gravity 1.75 minimum weight film thickness/coat 40 microns and minimum adhesive bond strength with steel is 1.5N/mm2 complete all as specified and directed by Engr-in-charge.
Supply, mixing and application two component structural grade polymer modified reinstatement mortar, where local spalling has taken place or shuttering is not possible . The mortar can be applying in layers not exceeding 6mm thick in each layer in and upto any thickness in smaller vertical pockets and upto any thickness in horizontal applications. The mortar should have a minimum compressive strength 12N/mm2 in 1 day and 45N/mm2 in 28 days. Minimum flexural strength should be 8 N/mm2 in 28 days. A modified styrene butadiene emulsion for use as a bonding aid and gauging liquid for cementitious system to be mixed with cement slurry before the application of modified polymer mortar to be used @ 6 ltr/bag of cement. The bonding agent should have minimum compressive strength 24N/mm2. Minimum tensile strength 3.5N/mm2, minimum flexural strength 6.5N/mm2 complete all as specified and directed by the Engr-in-charge upto 25 mm average thickness
Preparing old surfaces of walls, Removing Nails, any hanging items (weight less than 500 Grams), filling cracks/ holes wherever directed by grouting and removing concrete/ Mortar spallings including smoothen the surface with a mixture of Putty and approved adhesive in 1:1 ratio and applying Two coat of white wash complete all as specified and directed .
All as per item No.7 above but in ceiling.
All as per item No. 7 above but applying colour wash in walls.
Preparing old surfaces of walls, Removing Nails, any hanging items (weight less than 500 Grams), filling cracks/ holes wherever directed by grouting & removing concrete/ Mortar spallings including smoothen the surface with a mixture of Putty and approved adhesive in 1:1 ratio and applying one coat of oil bound distemper with roller complete all as specified and as directed.
All as per item No.10 above but in ceiling.
M & L for Complete removal of existing treatment on internal plastered surfaces of wall including washing, rubbing down and stopping of old treatment by using vacuum based hand held or long handle sander machine, Removing Nails, removing concrete/ Mortar spallings and any hanging items (weight less than 500 Grams), Filling cracks/ holes wherever directed by applying a mixture of Putty and approved adhesive in 1:1 ratio, Applying two coats of oil bound distemper over a coat of alkali resistant primer over wall care putty of 1mm thick with roller complete all as specified and as directed.
All as per item No. 12 above but in ceiling.
M & L for Preparing old surfaces of walls, Removing Nails, any hanging items (weight less than 500 Grams), filling cracks/ holes wherever directed by grouting & removing concrete/ Mortar spallings including smoothen the surface with a mixture of Putty and approved adhesive in 1:1 ratio and applying one coat of Cement base paint with smooth roller machine complete all as specified and as directed.
M & L for Complete removal of existing treatment on external plastered surfaces of wall including washing, rubbing down and stopping of old treatment by using vacuum based hand held or long handle sander machine, Removing Nails, removing concrete/ Mortar spallings and any hanging items (weight less than 500 Grams), Filling cracks/ holes wherever directed by applying a mixture of Putty and approved adhesive in 1:1 ratio, applying two coats of Anti fungal based weather proof paint over a coat of alkali resistant primer over damp proof wall care putty of 1mm thick with roller complete all as specified and as directed.
M & L for applying one coat of synthetic enamel paint to wooden surfaces exceeding 10cm width or girth including preparation of old painted wooden surfaces by filling holes/ making uneven surfaces even by using wood putty complete all as specified and as directed.
M & L for applying one coat of synthetic enamel paint to steel surfaces exceeding 10cm width or girth including preparation of old painted steel surfaces by scrubbing down corrosive surfaces with abrasive pads complete all as specified and as directed.
All as per item No.17 above but width or girth not exceeding 10cm.
Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.
Material and labour for rendering (Internal Surfaces) 15mm thick in CM (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed.
Material and labour for rendering (External surfaces) 10mm thick in CM (1:4) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed.
Material and labour for rendering 5mm thick in CM (1:3) on ceiling , finished the surface even and smooth without using extra cement complete all as specified and as directed.
M & L for preparation of new plastered surface (internal walls) and applying two coats of oil bound distemper over a coat of alkali resistant primer over wall care putty of 1mm thick with roller complete all as specified and as directed.
All as per item No. 23 but in ceiling
M & L for preparation of new plastered surfaces (External walls) and applying two coats of Cement base paint over a coat of alkali resistant primer with smooth roller machine complete all as specified and as directed.
Material and labour for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.
All as per item No. 26 but in ceiling
Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.
M & L for Fly Ash block masonry (Modular size) solid blocks, exc. 10cm in width with class designation 75 (Kgf/cm2). and setting in CM 1:6 complete all as specified and as directed.
M & L for Fly Ash block masonry (Modular size) solid blocks, exc. 10cm in width with class designation 75 (Kgf/cm2) in half brick walls and setting in CM 1:4 complete all as specified and as directed.
Supply and lay TMT bar 8 mm dia for reinforcement of half brick wall complete all as specified and as directed. (Note : Reinforcement shall be provided at every fourth course of half brick wall).
Dismantling old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.
M & L for non skid, ceramic “coloured” joint free tiles of size area of each tile exceeding 0.06 sqm but not exceeding 0.11 and thickness 7-8mm, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over 15mm thick screed bed of CM 1:6 complete all as specified and as directed.
All as per item No. 33 but area of each tile exceeding 0.18 to 0.38.
M & L for glazed ceramic coloured tiles 300 x 450 x 7mm thick as in vertical surfaces set & jointed in neat cement slurry & pointed with coloured cement to match over 10 mm thick rendering with CM 1:4 all as specified &directed.
Dismantling of stone slabs and tiles of any description or thickness kin floors, aprons etc complete all as specified and directed.
Material & Labour Polished granite stone slab 20mm thick Granite (of any type) Polished in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including moulding at front edge or both edges in CM (1:4) screed bed of 20mm all as specified and as directed.
Material & Labour for laying Green Marble 18 to 20 mm thick with polishing as in skirting/dado/ window cills/ jambs, cooking platform, vertical surface over cement rendering and jointed with grey cement, over and including screed bed of 15mm thick in CM 1:4, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with the shade of marble and making nosing at right angle corner as specified and as directed.
Material and labour for cleaning and removing all scale, dirt and fungus etc. from tanks and mouth of circulating pipes, with suitable cleaning chemical and brushing the wall and bottom of tanks, washing with clean water, writing letter i.e. "TANK CLEANED ON ......................(Date)" not exc. 100mm height with synthetic enamel paint for tanks of capacity 250 ltrs to 500 ltrs complete all as specified and as directed.
All as per item No. 39 above but tanks of capacity exceeding 501 ltrs to 1000 ltrs.
Supply and fix in repairs PVC top cover of water storage tanks having capacity exc. 500 Ltrs but n.exc. 1000 Ltrs complete all as specified and as directed.
Uprooting of wild trees such as grasses/ bushes etc. from the roof/wall surfaces/AC sheet/soil pipes surroundings including its penetrated roots and making good to the damaged plaster by providing cement mortar (1:3) and finished the surfaces to match with existing surfaces complete all as specified and as directed. (Cost of materials is deemed to be included within the quoted rate)
Supply and fix in repair 304 Grade 25mm Outer dia stainless steel curtain rod of 1mm wall thickness cut to required length complete all as specified and as directed.
Supply and fix in repair 304 Grade Universal Curtain rod brackets One Pair (One pair comprises of Two Pieces, One with closed opening and one with half round opening for laying of Curtain rod as specified in Item no 43 above) of 63mm x 20mm x 1mm wall thickness fixed to wall with Stainless steel Screws complete all as specified and as directed.
Supply and fix in repair 15mm bore Bib tap (Minimum weight 90gms) standard of PTMT any colour high pressure screwed for iron pipe complete all as specified and as directed.
Supply and fix in repair 15mm dia Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 90gms) complete all as specified and as directed.
Supply and fix in repair 15mm bore Pillar tap (Minimum weight 110gms) standard of PTMT any colour high pressure screwed for iron pipe complete all as specified and as directed.
Supply and fix in repair health faucet (ABS body) with 32mm dia main body 1 meter long flexible tube and wall hook for fixing in 15 mm dia pipe complete all as specified and as directed.
Supply and fix in repair health faucet (Full Stainless steel body) with 32mm dia main body 1 meter long SS flexible tube and SS wall hook for fixing in 15 mm dia pipe complete all as specified and as directed.
Supply and fix in repair bib taps of 15mm bore long body, fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule all complete as specified and as directed.
Supply and fix in repairs 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including PVC connections 15mm size with PTMT nuts and washer both side of length 450mm complete all as specified and as directed.
Supply and fix in repairs vitreous China wash basin white flat back, size 550 x 400 mm including PTMT waste coupling 32mm dia (min wt 45 gm), 15mm bore PTMT pillar tap, chain and plug and porcelain stopper etc. complete all as specified and as directed.
Supply and fix in repairs 3mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beadings in square not exceeding 0.5 Sqm in each pane including hacking out old broken glass from metal/wooden frame complete all as specified and as directed.
All as per item No. 53 but frosted.
Supply and fix in repairs stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and as directed.
Demolition of cement concrete of any description including any treatment there to and in any position provided as in roof padding, roof curb etc complete all as specified and as directed. Note: - (a) Demolition should be done carefully to roof slab. (b) Any damage occurred in the roof surfaces during demolition shall be made good by the contractor without extra cost to the department. (c) Disposal of old debris/retrieved material to outside the premises or as directed by the Engineer-in-Charge.
Material and labour for providing 25mm thick plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in roof padding laid in slope as per requirement mixed with integral water proofing liquid admixture as per manufacturer's instructions complete all as specified and as directed. Note : (i) Integral water proofing liquid admixture shall be measured and paid separately under appropriate item here in after
Material and labour for water proofing treatment with APP based standard membrane over PCC padding in roof with the following courses of treatment :- (a) Apply bituminous primer (IS 3384) @ 0.40 Kg per sqm of the surface area including cleaning the surfaces complete all as specified. (b) Apply APP plastomeric bitumen based mineral finished water proofing membrane polyester reinforced(4 Kg/Sqm) with 10cm over laps and torch bonded at joints including surface preparation before and after application of treatment as per manufactures instruction complete all as specified. (Make of APP Membrane: WP Shield 103 PM of SIKA or Equivalent as approved by GE) (Note :- Cost of cutting groove to parapet wall for inserting APP membrane and filling groove with cement mortar (1:3) is deemed to be included within the quoted rate.)
Supply only integral water proofing liquid admixture for concrete and cement mortar. (Make : Conplast SP430 of FOSROC/ PLASTOCRETE PLUS of SIKA or equivalent as approved by GE).
Supplying and fixing in repairs 25 mm bore brass float valve, high pressure with polythene float & fly nut complete, screwed for GI pipe of following sizes including necessary GI fittings complete all as specified and directed.
All as per item No. 60 but size 32mm
Supply & Fix in repairs stainless steel plate rack of size 600X580X210 mm fixed to wall with screws complete all as specified and directed.
M & L for Cement Grouting floors & Walls joints (Tiles) with Special grouting materials including cleaning joints and removing loose hardened old grout or any type of waste complete all as specified and as directed. List of Grouts Ultratech Cement Grout Myk Laticrete Cement Grout Saint Gobain weber cement grout Birla white cement grout
All as per item No. 64 but in Cracks and including cutting grooves 'V' shape and filling the same with putty and approved sealant.
S & F in repair Vitreous China, semi-pedestal pattern (Anglo-Indian Type), white (including fixing bolts and Seat Cover)
Supply & Fix in repairs of 32mm dia PVC (flexible) waste pipe 900 mm long complete all as specified and directed.
S & F PVC flexible connections 15mm size with PTMT nuts of length 600mm
M & L for Complete removal of existing treatment upto obtaining mother surface (Plaster) including washing, rubbing down and stopping of old treatment by using vacuum based hand held or long handle sander machine for obtaining the existing surface even and smooth, Removing Nails, any hanging items (weight less than 500 Grams), filling cracks/ holes wherever directed by grouting with a mixture of Putty and approved adhesive in 1:1 ratio and applying 2 Coats of approved Damp proof Putty, Applying two coats of Oil bound distemper white or coloured as specified over a coat of alkali resistant damp proof primer with smooth automatic paint roller machine complete all as specified and as directed.
M &L for preparation of old treated surfaces and applying one coat of Plastic emulsion of walls complete all as specified and as directed.
Supply and fix in repairs UPVC (SWR) pipe 110mm bore, type A, single socketed, in any length with rubber ring joints fixed to walls with and including PVC clip complete all as specified and as directed.
Supply and fix in repairs UPVC (SWR) pipe 110mm bore, type B, single socketed, in any length with rubber ring joints fixed to floors with and including PVC clip complete all as specified and as directed.
Supply and fix in repairs UPVC (SWR) pipe 50mm bore, type B, single socketed, in any length with rubber ring joints fixed to floors with and including PVC clip complete all as specified and as directed.
Supply and fix in repairs UPVC (SWR) pipe bend 110mm bore complete all as specified and as directed.
Supply and fix in repairs UPVC (SWR) pipe bend 50mm bore complete all as specified and as directed.
Supply and fix in repairs UPVC (SWR) pipe 50mm bore, type A, single socketed, in any length with rubber ring joints fixed to floors with and including PVC clip complete all as specified and as directed.
Mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete all as specified and as directed.
Resuring or easing of wooden shutters without taking down from frames of size 1.00 Sqm to 2.5 Sqm complete all as specified and as directed.
Resuring or easing of wooden shutters without taking down from frames of size 0.30 Sqm to 1.00 Sqm complete all as specified and as directed.
Taking down rolling shutter of any description, size not exceeding 20 Sqm each and removal from site to store complete all as specified and directed.
S&F 1.25mm thick laths steel rolling shutters without ball bearing, as specified including top hood cover 50mm anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, push, pull or manual type complete all as specified and directed.
Taking down rolling shutter and re-fixing to its original position after cleaning all parts, straighten sliding rails, replacing damaged strips, bottom rails, helical spring as required, greasing/ oiling, servicing for smooth functioning for all parts, including welding etc. rolling shutter push pull or manual type, size n. exc. 10Sqm complete all as specified and directed. Note:- Supply only of parts to be replaced parts shall be measured and paid separately.
All as per Ser. No. 82.00 above but rolling shutter gear operated type with bevel gear box and cranked handle for smooth function, size exceeding 10Sqm but not exceeding 20Sqm complete all as specified and directed.
Supply only steel sheet 75mm wide lath strip 1.25mm thick for rolling shutters including mild steel clips at either ends duly painted with two coats of synthetic enamel paint (shade to match with the existing) over a shop coat of red oxide primer complete all as specified and directed.
Supply only mild steel spring 75mm to 150mm dia made of high tensile steel wire conforming to IS: 4454 having 60 to 80 helical for smooth working condition for rolling shutters complete all as specified and directed.
Supply only mild steel anchoring rod 50mm dia including necessary fixture for rolling shutters complete all as specified and directed.
Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in mass filling in sunken portion of the building complete all as specified and directed
M&L for 50 mm thick plain cement concrete (1:2:4) type B-0 (using 12.5 mm crushed stone graded aggregate) as in sub base complete all as specified and as directed.
M&L for 15mm thick rendering in CM 1:3 on floor and wall surface complete with liquid water proofing compound as per manufacturer's instructions for sunken slab /floor /wall complete all as specified and as directed. Note:- Liquid water proofing compound shall be measured and paid separately.
M&L for Applying three coats of brush bond acrylic based cementations material of approved quality on floor and wall ,complete all as specified and as directed. Make : Dr. Fixit- Pidifin 2K or Brushbond RFX of Fosroc India (P) Ltd. or equivalent as approved by GE
M&L for Treatment to sunken slab by applying primer @ 0.5 kg/Sqm over the prepared surface and hot blown cutback bitumen @ 0.70 Kg/Sqm providing and laying polythene film 150 micron thick with cut back bitumen adhesive on min 15 cm over lap complete all as specified and as directed.
Taking up or down 15mm dia steel tubing and connections, segregating serviceable pipe for reuse complete all as specified and as directed.
All as per item No. 93 above but 20mm dia.
Supply and fix 15mm bore medium grade galvanized steel tubes with all fittings and fixed to wall or in floors etc complete all as specified and as directed.
All as per item No. 95 above but 20mm dia.
All as per item No. 95 above but fixing only. Note: Serviceable GI pipe obtained from item No. 93 above shall be reused after cleaning.
All as per item No. 96 above but fixing only. (Note : Serviceable GI pipe obtained from item No. 94 above shall be reused after cleaning).
Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames)
Taking down Chowkhats or frames exc. 1.5 sq. m but n.exc 4.00 Sqm each with shutters (without taking off shutters from the frames)
2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed..
Material labour for PCC (1:3:6) type C-1 using 20 mm graded crushed stone aggregates as in hold fast block complete.
M & L for preparing new wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed .
S & F for Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing
S&F, factory made solid panel PVC door shutter 30mm thick (style)consisting of frame made out of MS tubes for top & bottom rail, MS frame shall be covered with heat moulded plain cover PVC "C" channel having a PVC sheet strip of 20mm width stuck in side with solvent cement for styles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and shown on drawing in SSR Part II 2020.
S & F Powder coated Aluminium grill/Deco grill for Windows , Ventilators etc fixed to UPVC frames with suitable fasteners including all fixing arrangements.
Supply and fix 100 mm size butt hinges, medium weight, stainless steel and fixed complete all as specified and as directed.
S & F of 200mm Aluminium anodised, barrel tower bolts of extruded section and fixed
S & F Aluminium handles, cast type, anodised of size 150 mm
Supply and fix 200mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed..
Supply and fix 150mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed..
S&F UPVC ,(unplastisized poly-Vinyl Chloride) sliding windows frame multi-chambered and stiffened framed , using 88mm x 52mm size sections all-round as main frames fixed the window unit to the existing masonry with anchor fasteners as required. The frames shall be reinforced with GI profiles of thickness 1.25mm the entire window is covered with MS powder coated tube of size 40mm x 20mm all-round the frame the frame section. The gaps between the window frames and masonry walls shall be filled with silicon or with any other suitable filler materials complete all as specified and directed. Make : Rajshri Plastiwood/ Sintex/Duroplast Extrusion Pvt. Ltd
S&F UPVC window, (unplastisized poly-Vinyl Chloride) sliding windows shutters (Glazed & wire mesh) made with profile sections of size 57mm x 42mm fixed to UPVC frame, shutters shall have well defined welded corner joints without any gaps, The shutters shall have necessary handles and other associated fittings to facilitate smooth operation. The shutters shall be reinforced with GI profiles of thickness 1.25mm the entire window is covered with MS powder coated tube of size 40mm x 20mm all-round the frame the frame section complete all as specified and directed. Make : Rajshri Plastiwood/Sintex/Duroplast Extrusion Pvt. Ltd
Providing and fixing factory made uPVC white / colour casement window frame (Size-60 mmx 58 mm ), made of extruded profiles. Profiles of frames will be mitered cut and fusion welded at all corners , 1.2+ 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, all complete and as directed Make : Rajshri Plastiwood/ Sintex/Duroplast Extrusion Pvt. Ltd
Supply and fix in repairs 4.00mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beadings in square not exceeding 0.5 Sqm in each pane including hacking out old broken glass from metal/wooden frame complete all as specified and as directed.
All as per item No. 115 but frosted.
M & L for filling and 63mm nominal size brick bats in sunken slabs complete all as specified and as directed.
P SRINIVASA RAO
SRI SRK ENGINEERS
SREE VIGNESWARA CONSTRUCTIONS
SRI RAJA RAJESWARI ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .