Providing permanent shelter for Kalyanotsavam in Sri Prasanna Venkateswara Swamy at Thondamanpuram Tiruapti

Demolishing and disposal of unserviceable materials within 100 metres lead Unreinforced cement concrete up to 15cm thickness

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10 m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work for Ordinary soil - Mechanical means upto 3m depth.

Filling with useful available excavated earth (excluding rock) in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work.

Conveyance of excavated surplus earth /debris to a distance 2 KMS from the site of work at at a place specified by the engineer in charge including loading and unloading etc., complete as directing during execution.

Filling of foundations and basement with best river sand in layers of not more than 15cms, thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete

Cement Concrete (1:4:8) using 40 mm (0.54 Cum), 20mm (0.27 Cum) and 12 mm (0.09 Cum) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including curing, machine mixing,cost and conveyance of all materials etc., complete.

Supply and placing of M 25 Design Mix Concrete corresponding to IS 456 using concrete mixer using of 20 mm HBG crushed metal 0.530 cum (707 kgs),. 10 mm HBG crushed metal, 0.362 cum (471 kgs) , sand 0.407 cum (616 kgs.) and cement 380 kgs with water cement ratio of 0.48 ( 182.40 ltrs/ cum of CC)etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with cement from standard suppliers approved by the department but in cluding cost of centering,charges , using steel scafloding pipes, wallers, foot plates, brackets, steel cntering plates,etc.,shuttering charges and excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402).

for column Pedastels

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) steel bars Fe 500/ Fe- 500D grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS No.126) In the absence of 18G binding wire, 2 no's of 20G binding wire in tandem are to be strictly adhered. Note: Unless otherwise fabrication and placement of steel, no pre-payment shall be made against the supply of steel reinforcement.

Construction of Brick Masonry In C.M.(1:5) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x 70 mm)including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

Plastering in Cement Mortar following items using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete.

-do- in CM (1:5) 20mm thick

-do- in CM (1:5) 12 mm thick

Flooring with Chequered cement concrete heavy duty tiles confirming to IS:13801 using aggregates, cement, pigments of size 300 X 300 x 25mm of any shades 25 mm thick confirming to IS 1380-12013/IS 1237-2012 of following sizes set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sq.m & jointed with neat cement to full depth mixed with pigment of matching shade including cost & conveyance of all materials, etc., complete for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply)

Flooring with vitrified tiles of 1st quality of double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sq.m & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials, etc., complete - for finished item of work.

Supplying ,fabrication and placing in position of M S pipe truss work by using by M S pipes of different diameters as per I S 1161 for truss work including cutting ,welding ,grinding , finishing and placing in position for required spans including cost of fabrication charges welding rods ,power charges, and erecting in position and fixing by using chain pully blocks derk pole arrangements and cranes etc., complete and as directed by the department

Supply and fixing of Galvalume sheet Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.47mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours with minimum end lap of 15 cms etc.,complete as directed during execution.

Painting two coats for new wall with Acrylic Emulsion paint exterior grade with silicon additives over a primer coat with ready mixed cement primer grade-II (water thinnable) for plastered surface (Total three coats) having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.

Painting Two coats for New Iron work with Ready mixed Synthetic Enamel paint in all shades - Grade -I over a primery coat (Red Oxide metal primer) (Total Three Coats) approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.