Construction of New Gram Panchayat Building At Hilol Vasana Village Under CDP - 5 (2025-26) Taluka: Dahegam, Dist.: Gandhinagar.

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

1 materials and disposing off the excavated 63.000 Cum 123.13

stuff upto 50 Meter lead.(A) Loose or soft soil

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

2 materials and disposing off the excavated 23.00 Cum 157.16

stuff upto 50 Meter lead.(B) Dense or Hard

Excavation for foundation for depth from

m to 3.0 m including sorting out and stacking

3 of useful materials and disposing off the 34.00 Cum 287.21

excavated stuff upto 50 Meter lead.(C) Hard

filling in plinth with Sand under floors including

4 watering ramming, consolidating and dressing 17.00 Cum 481.70

Filling available excavated earth (excluding

rock) in trenches. plinth, sides of foundations

5 etc. in layers not exceeding 20 cm. in depth 72.00 Cum 136.92

consolidating each disposited layer by

ramming and watering.

Filling in foundation and plinth with murrum or

including watering, ramming and consolidating

etc. complete.

Applying general insecticide pest control

treatment to floors, cupboards etc including

labour materials etc. complete. Using

Imidacloprid 30.5 S Cas Per IS 6313 part -II(

7 (0.075% concentration by mass) is 109.00 Cum 91.63

recommended 10.5ml chemical diluted with

liters of water application 0.5 litre chemical

/Sqm of surface is recommended as per I.S.

Providing and laying cement concrete 1:2:4 (1-

Cement : 2- Coarse sand : 4- graded stone

8 aggregates 20 mm nominal size) and curing 7.00 Cum 4155.14

complete excluding cost of formwork in (A)

Foundation and Plinth

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

Providing and laying cement concret 1:1.5:3

(1 Cement : 1.5 coase sand : 3 graded stone

aggregrate 20mm nominal size) and curing

9 complete exculding cost of form work and 9.60 Cum 5043.94

reinforcement for reinforced cement concrete

work in (a) Foundation footing base of column

and mass concrete

Providing and laying nominal cement concrete

M-200 in R.C.C. 1:1 1/2 :3 (1 cement :1 1/2

coarse sand : 3 graded stone agregate

mm. Nominal size) including finishing smooth

with curing complete including the cost of form

work but excluding the cost of reinforcement

for R.C.C. work in column Upto plinth level.

Providing and laying cement concrete 1:3:6 (1-

Cement : 3- coarse sand : 6- hand broken

11 stone aggregates 40 mm ominal size) and 15.00 Cum 3396.68

curing complete excluding cost of formwork in

(A) Foundation and Plinth

Providing and laying nominal cement concrete

M-200 in R.C.C. 1:1 1/2 :3 (1 cement :1 1/2

coarse sand : 3 graded stone agregate

mm. Nominal size) including finishing smooth

with curing complete including the cost of form

work but excluding the cost of reinforcement

for R.C.C. work in column for All Floor

Providing and laying nominal cement concrete

M-200 in R.C.C. 1:1 1/2 :3 (1 cement :1 1/2

coarse sand : 3 graded stone agregate

mm. Nominal size) including finishing smooth

with curing complete including the cost of form

work but excluding the cost of reinforcement

for R.C.C. work (c) PLINTH BEAM

Providing and laying cement concrete work

1:2:4 (1- Cement: 2- Coarse sand: 4- graded

stone aggregates 20 mm nominal size) and

curing complete excluding cost of formwork

and reinforcement for reinforced concrete

work in BEAMS for all Floor

Providing and laying nominal cement concrete

M-200 in R.C.C. 1: 1 1/2 : 3 (1 cement :1/2

coarse sand : 3 graded stone agregate

mm. Nominal size) including finishing smooth

with curing complete including the cost of form

work but excluding the cost of reinforcement

for R.C.C. work in LINTELS All Floor.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

Providing and laying nominal cement concrete

M-200 in R.C.C. 1: 1 1/2 : 3 (1 cement :1 1/2

coarse sand : 3 graded stone agregate

mm. Nominal size) including finishing smooth

with curing complete including the cost of form

work but excluding the cost of reinforcement

for R.C.C. work in CHHAJJAS All Floor.

Providing and laying nominal cement concrete

M-200 in R.C.C. 1: 1 1/2 : 3 (1 cement :1 1/2

coarse sand : 3 graded stone agregate

mm. Nominal size) including finishing smooth

with curing complete including the cost of form

work but excluding the cost of reinforcement

for R.C.C. work in slabs for All Floor.

Providing and laying cement concrete work

1:2:4 (1- Cement : 2- Coarse sand : 4- graded

stone aggregates 20 mm nominal size) and

curing complete excluding cost of formwork

and reinforcement for RCC work in Staircase

for all Floor

Providing TMT Bar FE 500D reinforcement for

R.C.C. work including bending, binding and

placing in position complete upto floor two

Brick work using common burnt clay building

bricks having crushing strength not less than

20 35 kg./Sq.Cm. in foundation and plinth in 12.00 Cum 4214.09

Cement Mortar 1:6 (1- Cement : 6 -fine

sand)(B) Conventional

Brick work using common burnt clay building

bricks having crushing strength not less than

21 35 kg./Sq.Cm. in foundation and plinth in 36.00 Cum 4517.76

Cement Mortar 1:6 (1- Cement : 6 -fine

sand)(B) Conventional

Half brick masonry in common brunt clay

building bricks having crushing strength not

less than 35 Kg/Sq.Cm. in Cement mortar 1:3

22 ( 1-Cement : 3-coarse sand ) with 2 Nos of 10.00 Sqmt. 755.67

6mm Mild steel round bars after every three

course embedded in Cement Mortar in

foundation and plinth (B) Conventional

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

Providing and fixing door single shutter

mm thick flush door teal wood beading 75 x

35 mm including both side in situ laminate

with 18mm thick granite frame 6 lever mortice

23 lock, SS aldrop 30 cm long, handle size 15 cm 7.80 Sqmt. 7020.51

long, Tower bolt size 20 cm etc. as per details

colour & pattern approved by thye office

including necessary anodized alluminium

fixtures and fastenings.

Providing and fixing FRP frame size 100x50

mm and 28mm thick FRP depress panel

shutter having extra reinforcement on sides &

edges in Gel coat finish. The core of the

shutter & frame is to be filed up with injected

fire retardant grade polyurethene foam done

in situ alongwith embedded wooden pieces for

24 stiffening & also taking hinges & fintures. The 1.60 Sqmt. 2377.76

whole FRP frame & shutter is to be water

proof weather proof, termite proof &

resistance to mild acid/alkali. Rates are to be

inclusive of S.S hinges with necessary screws

& alluminium fixtures & fastenings & fastener

Providing and fixing Anodized Alluminum

Section Jindal Deluxe Sliding Window System

C (30mm) series sction memebers THREE

track window section bottom track

frame top & side 21203, shutter frame top rail

25 & bottom rail 20993, side rail 20553, lock rail 10.80 Sqmt. 3325.93

20550 with 5mm thick transparent plain float

glass, with transparent silicon sealant with

allu. anosized coated fittings and

fixture etc complete

Providing and fixing standared extruded of

alluminium section of size 63 mm x 38.10mm

x 1.2mm @ Wt. 0.643 Kg/mt with colour

anodized alluminium frame for ventilation with

5 mm thick frosted glass as details etc

complete for Ventilation

Providing and fixing Safty grills of required

pattern for windows 12mm dia M.S. round Bar

at required spacing M.S. Flat 25mm x 5mm

thick as per design and hold fasting with

coach bolts including one coat of primer and

Shall be Painting with Enamel Paint and

Colour approved by as per site

Engineer etc complete,

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

Providing and laying Machine cut, Free edges,

Machine polished Granite stone slab 16 to

mm thick (Single piece not more than 150 cm)

for stair steps and riser as per design incl. full

moulded round front edge & 1 cm nosing &

necessary groobe on trade of steps laid on

mm thick cement mortar 1:6 (1-cement

coarse sand) jointed with grey cement slurry

including rubbing and polishing etc. complete

Providing and laying Vitrified tiles 8 to 10 mm

thick , 24'' x 24'' in skrting risers of steps and

dedo on 10mm thick cement plaster 1:3 (1-

Providing and layingCeramic tiles 6mm thick

in skrting risers of steps and dedo on 10mm

30 thick cement plaster 1:3 (1-cement : 3-coarse 6.10 Sqmt. 1074.00

sand) and jointed with white cement slurry

Providing and laying Ceramic tiles 6 mm thick

in flooring treads of steps and landing laid on

31 a bed of 12mm thick cement mortar 1:3 (1- 3.00 Sqmt. 1017.30

cement : 3-coarse sand ) finishing with flush

pointing in white cement.

Providing and laying white glazed tiles 6mm

thick in flooring treads of steps and landing

32 laid on a bed of 12mm thick cement mortar 13.00 Sqmt. 963.12

1:3 (1-cement : 3-coarse sand ) finishing with

flush pointing in white cement.

Providing and fixing pre-cast Rubber Dye /

steel Dye inter locking concrete block 60mm

thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as

33 per approved design Confirming to IS 15658 : 14.00 Sqmt. 706.90

2006 including 35 mm Sand layer for levelling

and filling the joint with sand in proper line and

level as per guidlines of IRC : SP 63-2018 etc.

Providing and laying broken chine mosaic

flooring for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be

34 tempered to bring mortar creme out upto 100.00 Sqmt. 779.70

surface using white cement including rounding

off junctions and extending them upto 15 cm

along the wall,clearing with water and oxalic

acid etc. as directed.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

Providing and laying Mirror polished Machine

polished Grenite stone slab 18mm thick for

doors & windows sill & Jams clading as per

design including full moulded round front

steps & 1cm nosing & necessary groove on

35 trads of steps ; laid on 20mm thick cement 14.00 Sqmt. 3395.62

mortar 1:6 (1 cement: 6 coarse sand) jointed

with gray cement sluury including rubbing and

polsihing etc. complete.for Doors/windows

sill & jams clading.

Providing 20 mm thick double coat mala

cement plaster on interior brick/concrete work

for plastering . 35 comprising of base coat of

36 12 mm thick cement plaster in cement mortar 243.00 Sqmt. 299.98

(1 Cement: 4 coarse sand) in rough finishing

and 8 mm thick top coat of cement

Providing 10mm thick cement plaster in single

coat on brick/concrete walls for interior

37 plastering upto floor two level and finished 98.00 Sqmt. 211.98

even and smooth in (i)Cement mortar 1:3 (1-

cement:3-sand)

Providing and fixing chiken mesh jali with

square of 12.50 x 12.50 mm of 25 gauge at

junction the Brick.masonary and

reinforcement cement concrete member

including fixing materials scaffolding

labour etc. complete

Applying two coats of putty & two coats of

primer of approved brand and manufacture on

new wall surface to give an even shade

including thoroughly brushing the surface free

from mortar dropping and other foreign matter

and sand papered smooth.

Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated wall surface to give an even

40 shade including throughly brushing the 243.00 Sqmt. 83.18

surface free from mortar droppings and other

foreign matter and sand papered smooth.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated wall surface to give an even

shade including throughly brushing the

surface free from mortar droppings and other

foreign matter and sand papered smooth.

Extra over item 57 for painting with plastic

emulsion paint of approved brand on ceilings

and sloping roofs.

20mm thick sand faced cement plaster on

walls upto height 10 metres above ground

level consisting of 12mm thick backing coat of

C.M. 1:3 (1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-sand)

etc. complete.

Providing laying and jointing in true line and

level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre

C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

materials.

Providing laying and jointing in true line and

level 25 mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre

C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials. [B]

Providing laying and jointing in true line and

level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre

C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials.[D]

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

Providing and fixing uPVC Heavy Duty Handle

valve of aprroved brand and Quality with

46 required fitting and adhesive incl. fixing the 2.00 No. 469.65

same with new pipe line as directed by

engineer in charge. (B) 25mm dia.,

Providing and fixing uPVC Heavy Duty Handle

valve of aprroved brand and Quality with

47 required fitting and adhesive incl. fixing the 1.00 No. 685.79

same with new pipe line as directed by

engineer in charge. (C) 40mm dia.,

Providing, laying and jointing in true line and

level 75 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line,

pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall

48 using of PVC clamp of the size 110 mm 10.00 Rmt. 756.22

diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be

concealed in walls as directed including

necessary fittings such as bends, shoes etc.

including testing of pipes and joints and

jointed with adhesive solvent cement including

cost of all materials.

Providing and fixing to wall ceiling and floor

10.0 Kg. F/Cm2 working pressure poluthene

pipes of the following outside Dia. Low

49 densidy, complete with special falnge 16.00 Rmt. 339.05

compression type fittings, wall clipsetc.

including making good the wall ceiling and

floor.(G)110 mm

Providing, laying and jointing in true line and

level 110 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line,

pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall

50 using of PVC clamp of the size 110 mm 14.00 Rmt. 876.90

diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be

concealed in walls as directed including

necessary fittings such as bends, shoes etc.

including testing of pipes and joints and

jointed with adhesive solvent cement including

cost of all materials.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

Providing, laying and jointing in true line and

level 160 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line,

pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall

51 using of PVC clamp of the size 160 mm 5.00 Rmt. 834.38

diametre x 210 mm length x 196 mm heigh at

every 2000 mm center to center or shall be

concealed in walls as directed including

necessary fittings such as bends, shoes etc.

including testing of pipes and joints and

jointed with adhesive solvent cement including

cost of all materials.

Providing and fixing PVC SWR Nahni trap IS

14735 for drain - 100 mm diameter with jali of

the following nominal diameter of self

cleansing design with C.I scread down or

hinged grating including the cost of cutting

and making good the walls.

Providing and fixing screw down bib taps of

53 following size.(B) Brass chromium plated 2.00 No. 186.83

screws down Bib Tap. (i) 15mm dia.

Providing and fixing CP brass Quarter turn

pillar tap, capstan head screw down high

54 pressure with screw, shanks and back nuts 1.00 No. 308.73

(A) 15 mm dia {Jaquar< Plumber, Mark Long

pipe or equivalent brand}

Providing and fixing wash basin with pedestal

of std. Height with single hole for pillar tap with

C.I or M.S brackets painted white including

cutting cutting holes and making good the

same including C.P. brass waste and waste

pipes and bottal trap (A) Vitreous China: (ii)

Flat Back washbasin 550 mm x 400mm

size.In colour.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

Pro. & Fix. wash down water closet (anglo

indian W.C pan of Vitreous china Patern.) with

integral" p " or " s " trap and PVC flushing

cistern with a pair of C.L.I. Or Mild steel

Brackets, complete with fittings such as lead

value siphon, 15 mm. Nominal size brass ball

valve with polythene float, C.P. Brass handle

56 unions and couplings for connections with 1.00 No. 3223.92

inlet, outlet and over flow pipes, 40 mm. dia.

flush bend including cutting holes in walls and

making good the same connecting the flush

bend with cistern and closet etc comp incl

plastic sheet cover including jointing trap with

pipe in cm 1:1 (a ) Vitreous china in white or

Providing erecting and fixing double coated 4-

layer tough virgin plast ISI water tank of

57 required capacity each with all necessary 1000.00 Litre 10.61

fittings and connection etc. complete on

Providing and fixing 600mm x 450mm

bevelled edge mirrror of superior glass

58 mounted on 6mm thick A.C. sheet or plywood 1.00 No. 859.41

sheet and fixing to wooden pluge with C.P.

brass screws and washers.

Providing and fixing C.P. brass towel rail

comlete with C.P. brass brackets fixed to

wooden plugs with C.P. brass scews.(B)

600mm x 20mm size.

Providing and fixing S.W. gully trap with C.I.

grating brick masonry chamber and water tight

C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight.(i) Square mouth

traps.(B) 150mm x 100mm size P or R type

Providing and fixing brass screw down stop

tap.(A) 15mm dia.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

Constructing brick masonry chamber for

underground C.I. Inspection chamber and

bends with bricks having crushing strength not

less than 35Kg/Cm2 in C.M. 1:5 C.I. cover

with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with

frame to be not less than 38Kg. (Wt. of over

23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

62 slabe with 1:2:4 mix (1-cement :2- coarse 2.00 No. 2932.93

sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on

walls and bed concrete etc. complete.(i)

Inside dimensions 455mmx 610mm and

450mm deep for single pipe line.

Constructing brick masonry chamber for

underground C.I. Inspection chamber and

bends with bricks having crushing strength not

less than 35Kg/Cm2 in C.M. 1:5 C.I. cover

with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with

frame to be not less than 38Kg. (Wt. of over

23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

63 slabe with 1:2:4 mix (1-cement :2- coarse 1.00 No. 3660.76

sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on

walls and bed concrete etc. complete.(ii)

Inside dimensions 500mm x 700 mm and

450mm deep for pipe line with one or two

Finishing wall with weather proof exterior

emulsion paint on wall surface (two coats) to

give an required shape even shade after

thoroughly brushing the surface to remove all

dirt, and remains of loose powdered

materials.etc complete

Providing throating or plaster drip and

moulding to R.C.C. Chhajja.

Providing sock pit of 5.00 Cu.M. Volume

including excavating and filling brickbats with

dry masonry work at top for 45cm. height

including covering the top with stone including

providing vatas in C.M. 1:3 with finishing

curing etc. complete as directed.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

Providing sock pit of 5.00 Cu.M. Volume

including excavating and filling brickbats with

dry masonry work at top for 45cm. height

including covering the top with stone including

providing vatas in C.M. 1:3 with finishing

curing etc. complete as directed.

Point wiring for Light/Bell with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length,

in below type of pipe erected with 6A Modular

type switch/bell push & accessories and earth

continuity of following type, erected on

68 PVC/Metallic/ Wooden box, single mounting 10.00 Pt. 419.15

base frame covered with extured/

metallic/white front plate modules erected on/

in wall/ceiling as per pipe erected, with

necessary Lamp holder/ceiling

rose/H.D.Connector as directed.

Point wiring for FAN with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length,

in below type of pipe erected with 6A Modular

type switch and hum free EME step type

electronic fan regulator mounted and

accessories with earth continuity of following

69 type erected on PVC/Metallic/Wooden box, 4.00 Pt. 598.93

single mounting base frame covered with

textured/metallic/white front plate modules

erected on/in wall/ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector

as directed. (a) with medium class Rigid PVC

pipe and accessories erected flushed on

wall/ceiling complete

Point wiring for Individual Plug with & earth

wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length.

in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on

70 PVC/Metallic/Wooden box covered with 2.00 Pt. 445.41

appropriate front plate modules erected on/in

wall/ ceiling as per pipe erected with following

type of accessories. [I] For 6A Plug and 6 a

switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

Point wiring for on board Looped Plug with 6A

Modular type switch & 5 pin socket erected on

PVC/Metallic/Wooden box, single mounting

71 base frame covered with textured 2.00 No. 241.39

/metallic/white front plate modules erected on

in wall ceiling with following type accessories,

Providing and erecting ISI mark Medium class

RIGID PVC PIPES of following size complete

to be erected on/in wall or ceiling erected with

72 necessary PVC fittings & Junction boxes fixed 80.00 Mtr. 23.23

with adhesive solution & Clamps with

following dia of pipes, in approved manner as

Providing and erecting Mains with 1.1 KV

grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following

type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm

copper conductor FRLS PVC insulated

stranded wire of green colour for earth

continuity of following size (A) With medium

class Rigid PVC pipe and accessories. (b)

wire 2.5 sq. mm

Providing and erecting Mains with 1.1 KV

grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following

type of pipe to be erected in/on wall/ceiling

74 with 2.5 sq. mm copper conductor FRLS PVC 30.00 Mtr. 107.06

insulated stranded wire of green colour for

earth continuity of following size (A) with

medium class Rigid PVC pipe and

accessories (a) 2 wire 4 sq. mm

Providing & erecting Sheet Steel Powder

Coated MCB Distribution Board Flush/Surface

Mounted Fitted With Busbar Netural Link

Earth Bar and Din Rail Confirming to BS: 5486-

1986 without MCB to House Appropriate Nos

Providing and erecting Miniature circuit

breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with

ISI Mark (A) 6 to 32 Amp. CAT-III

PROVIDING AND ERECTING DOUBLE

POLE MCB ISOLATOR A.C.22 DUTY

CONFIRMS TO IS13947-3 240V 40 IN

EXISTING BOX. CAT-III

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

Approved Make ELCBs/RCCBs Conforming to

IS12640 and Having Sesitivity of 30Ma and

Short Circuit Withstand Capacity of 6KA and

Suitable for Operation on Single Phase 240V

78 Having Characteristic of Quick Action & 1.00 No. 2235.13

Tripping with All Advance Feature & Do not

Incorporate any electronic component for

Following Max Rating Erected as Directed (ii)

40AMPS.DP CAT-III

Supplying and erecting LED indoor fittings

with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing

used as a heat sink shall be made of thick

79 sheet Steel conforming to IS: 513/CRCA/ 6.00 No. 373.70

aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%,

Supplying and erecting led lamps with

following wattage capacity of 220 to

voltage, minimum 15000 burning hours life,

80 500 V in built-surge protection, Polycarbonate 2.00 No. 112.11

diffuser, mounting suitable for E14/E27/B22

lamp holders, pf>=0.5 (ii) 5 to 8 watts

Providing and erecting Approved make

Ceiling fan with double ball bearing ISI mark

with condenser A.C. 230V.50 c/s.1200 mm.

sweep complete, canopy erected on existing

hook or clamp with earthing. [Make shall be

approved by Engineer in charge]

Providing & erecting Switch board for

Computer or electric apparatus consisting of

following modular type accessories mounted

with PVC Metallic concealed/open box with

single mounting base frame covered with

textured/metallic /white front plate, modules

erected with necessary connections as

Decorative call bell Ting-tong box type

volts complete erected

Providing and erecting Pipe type earthing with

40 mm dia 2.5 Each mtr long 'B' grade G.I.

pipe with necessary coupling buch buried in

specially prepared earth pit & G.I. earth wire of

8 SWG erected & connected as directed (For

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

For using salt and charcoal / coke as required

85 for pipe type earthing. 1.00 No. 171.70

MGVC Ltd. meter connection charges

Total Rs.

Rupees Twenty Lakh FourtyFive Thousand Eight Hundred FiftyThree and Paisa Nineteen Only

I / We / am/are willing to carry out the work at ________________________________% above / below

percent (should be written in figure and words) of the estimated rates mentioned above. Amount of

my/our tender Works out as under.

Estimated Amount Estimated Amount

put to tender Rs. _________ put to tender Rs. _________

Deduct_______% below Add_______% above

Net Rs._________ Net Rs._________

in words ___________ in words ___________

The Contractor shall exhibit a board with detailed specification and details of work as directed by

the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.

G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in

4 R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned

in all the tender.

Dismentalling of Credit materials amounting of Rs. 0.00 must be recovered from Contractor's

respective R.A. Bill.

Signature of Contractor

Dy. Executive Engineer Executive Engineer

Panchayat R.&B Sub Division Panchayat R.&B.Division

Dahegam Gandhinagar