Repair and Relaying of HDPE Pipe in between PWS to Amberi Kesarada to Ukusahi Chhaka in Amberi GP Under Tirtol Block

Supplying all labour T&P,for earth work in all kinds of soil within 50 mtr initial lead and 1.5 mtr initial lift including dressing and leveling the bed and site and breaking the clouds to maximum 5 cm to 7 cm and laying in layers not exceed 0.30 mtr. In depth and as per the direction of Engineer- in-charge.

Supplying all labour,T&P, for laying in trenches High Density Polythene pipes and specials of following outsisde diameter and class 1 to 3 jointing by fusion welding method including testing as per specification confirming to IS: 4984-1995 with ISI marked specials & fittings & testing as per specification etc. complete as per the direction of Engineer-in-Charge. ( pipes are to be supplied by contractor with pre & post delivery inspection certificate from CIPET and manufacturing test certificate from the manufacturer).

160 mm HDPE Pipe Grade PE 80 PN 6.0

Supplying all labour T & P and refilling the trenches with excavated materials including watering and ramming etc. all complete as per the direction of Engineer-in-Charge.

Supplying all materials labour, T & P for fitting and fixing of the following cast iron sluice valve with double flanged ends for water works purpose for rating PN-1-6 (IS :780-1984) and nominal diameters including cost of cast iron sluice valves of IS marked as per ISI No. 14846/2000, bolts, nuts and rubber insertion as per PH specification etc. all complete and as per the direction of Engineer-in-Charge.

150 mm dia C.I Sluice Valve

15 mm dia Air Valve

Supplying of all materials, labour and T&P and construction of R C C sluice valve and N.R. Valve chamber as per approved drawing, design & specification.

Supplying all materials, labour,T&P and laying of G.I pipes of required sizes and length including earth work in pipe line trenches in all kinds of soil and refilling of the pipe line trenchs with the excavated materials and aligning the pipeline as per the site requirement and making ARC welding at the site painting both side of pipe with anticorosive paint over a coat of primer with all complete etc as per direction of Engineering-in-charge(G.I pipe shall be of BIS specification and TATA/Jindal or any other reputed make) thicknes of pipes.

150 mm dia G.I Pipe