REPAIR / REPLACEMENT TO STREET LIGHTS/SECURITY LIGHTS AND CONNECTED ITEMS AT DHOLEWAL UNDER GE LUDHIANA

Amount

Taking down existing street light fittings of any type/size/capacity fixed in any position i.e. on wall/ pole/ watch tower fixing the fitting in its original position after repairs complete all as specified and directed. (Note:-Spares shall be measured and paid seprately.

S & F in replacement LED street light luminaire of 45 watt in epoxy powder coated pressure die-cast aluminium housing of standard size, BIS marked electronic driver of approved brand only in housing having protection against over voltage, short circuit and open circuit and surge protection against lightening IP-66, protection for LED and control gear compartments with high power LED chips suitable for voltage band 120 volts to 270 volt, power factor 0.95 (minimum) Make :- Havells/Crompton/Bajaj/Philips

S & F in replacement LED street light luminaire of 60 watt in epoxy powder coated pressure die-cast aluminium housing of standard size, BIS marked electronic driver of approved brand only in housing having protection against over voltage, short circuit and open circuit and surge protection against lightening IP-66, protection for LED and control gear compartments with high power LED chips suitable for voltage band 120 volts to 270 volt, power factor 0.95 (minimum) Make :- Havells/Crompton/Bajaj/Philips

S & F in replacement LED street light luminaire of 90 watt in epoxy powder coated pressure die-cast aluminium housing of standard size, BIS marked electronic driver of approved brand only in housing having protection against over voltage, short circuit and open circuit and surge protection against lightening IP-66, protection for LED and control gear compartments with high power LED chips suitable for voltage band 120 volts to 270 volt, power factor 0.95 (minimum) Make :- Havells/Crompton/Bajaj/Philips

S & F for LED flood light fitting of 120 watt in epoxy powder coated pressure die-cast aluminium housing with, BIS marked electronic driver duly enclosed of approved brand only in housing having protection against over voltage, short circuit and open circuit and surge protection against lightening of 5 KV minimum with IP-66, protection for LED and control gear compartments with high power LED chips suitable for voltage band 120 volts to 270 volt, power factor 0.95 (minimum) having efficacy 100 lumens/watt all as specified and directed. Make :- Havells/CG/Bajaj/Philips

S & F for LED flood light fitting of 150 watt in epoxy powder coated pressure die-cast aluminium housing with, BIS marked electronic driver duly enclosed of approved brand only in housing having protection against over voltage, short circuit and open circuit and surge protection against lightening of 5 KV minimum with IP-66, protection for LED and control gear compartments with high power LED chips suitable for voltage band 120 volts to 270 volt, power factor 0.95 (minimum) having efficacy 100 lumens/watt all as specified and directed. Make :- Havells/Crompton/Bajaj/Philips

M&L for GI pipe medium grade 40mm dia 1.2 mtr long bend to shape as required and fixing with two nos MS clamp of size 40x6mm for fixing of street light fitting complete all as specified and directed.

Supply and fixing for 1100 volt grade heavy duty single core cable PVC insulated PVC sheathed with stranded copper conductor wire FRLS of size 2 x 1.5 Sqmm and 1 x 1.5 sqmm for connection purpose, ISI marked drawing through 20mm dia PVC pipe / conduit complete all as specified and directed by the Engr-in-Charge. Note: Three run of cable shall be measured as one unit.

Supply and laying for XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with stranded alumimium conductor of size 10 Sqmm 4 core complete all as specified.

Supply and laying for XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with stranded alumimium conductor of size 16 Sqmm 4 core. complete all as specified.

Excavation in trenches n. exc. 1.5 metre wide for foundations, laying cables and similar works n. exc. 1.5 m deep and getting out in soft/ loose soil complete all as specified & directed by Engineer-in-charge.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified & directed by Engineer-in-charge.

Removal of excavated surplus spoil to a distance n. exc. 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-charge .

M & L for sand cushioning for under ground cable 23cm thick (one layer of 8cm thickness before laying the cable and other layer of 15cm thickness after laying the cable) all as specified and directed by Engineer-in-Charge. Note:- Punning down thickness 18 cm shall be measured.

M & L for brick protection with old size sub class 'B' bricks laid flat across the route of underground cable all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of driver suitable for any type of street light 20W/45 watt complete all as specified and directed by Engineer- in-Charge.

Supply and fixing in replacement of driver suitable for any type of street light 60watt/90 W,120W complete all as specified and directed by Engineer- in-Charge.

Supply and fixing in replacement of Surge protection device suitable for any type of street light 20watt/45W complete all as specified and directed by Engineer- in-Charge.

Supply and fixing in replacement of Surge protection device suitable for any type of street light 60watt/90W,120/150/200 W, complete all as specified and directed by Engineer- in-Charge.

S&F for junction box made out of PVC size 300x300x150mm complete with 100 Amp 3 phase & one netural rated aluminium bus bar with inside box and fixed on pole with MS clamps, nut bolt and washers as specified and directed by EIC.Make ;- Universal switchgear control/hensal/Rittel

M & L for in replacement MCCB 63 Amps, 4 pole, with adjustable thermal adjustable magnetic release, ICS=ICU=100%, 415 volts, 50 HZ, 25 KA complete all as specified & directed by Engineer-in- charge.

M & L for in replacement MCCB 100 Amps, 4 pole, with adjustable thermal adjustable magnetic release, ICS=ICU=100%, 415 volts, 50 HZ, 25 KA complete all as specified & directed by Engineer-in- charge.

M & L for in replacement TPN MCB,4 pole 240 Volts, 50 Hz, having rupturing capacity 10 KA, of rating 63 Amps complete all as specified & directed by Engineer-in- charge.

M & L for in replacement MCB SPN , 240 Volts, 50 Hz, having rupturing capacity 10 KA, of rating 10 to 63 Amps complete all as specified & directed by Engineer-in- charge.

M&L for MCB SP 6 TO 32 Amps, 10 KA, C-curve complete all as specified & directed by Engineer-in- charge.Note Srl Item No.21 to 25 complete all as specified & directed by Engineer-in- charge. Make: HPL/ Havells/ Hager/ Indo- Asian .

Supply and fixing for automatic Street Light Switch using Nature switch for automatic switching of street lights based on LUX level of Natural light. The Infrared Sensor based Nature Switch along of capacity of 5 KW, three phase, with suitable Power Contactor(AC 3) 20-32 Amps and MCBs SP (Input-Output) 32 Amps on each phase at incoming and out going connections fully enclosed in pole/wall mountable enclosure, weather and vermin proof having front hinged shutter, rust proof, termite proof and FR grade SMC junction box having to IP 54 protection, pre-wired complete with suitable wire PVC insulated FRLS type copper conductor with suitable copper thimbles/lugs etc complete all as specified and directed. Make of Nature Switch : Kakatiya Energy Systems Pvt Ltd Hyderabad/ Bajaj/Healer. Make of Contactor : BCH/L&T/Schneider. Make of MCB : Hager/Schneider/L&T/BCH. Make of copper wire : Finolex/Polycab/RR Kable. Make of junction box : Hensal/Schneider/Rittal

M&L for painting of LT Steel tubular pole with junction box,clump and bracket any type of size externally above foundation with two coat of almn paint over a coat of red oxide primer after scraping/cleaning well the existing surface incl painting of bottom with black white or yellow color strip 30cm each upto 1.5 mtr high from top of PCC foundation block and numbring of pole with synthetic enamel paint white in 80mm high letter over 150mmx230mm yellow base complete.

Supply and fixing for galvanised pipe light grade of ISI marked 50 mm bore for passing of cable fixed to poles/walls/lay under floor complete with and including fittings as required compete all as specified and directed by Engr-in-charge.

Supply and fixing for LED post top lantren 20 watt in epoxy powder coated preesure die cast aluminium housing of standerd size , surge protection against lighting IP 66 , power factor 0.95(min) compete all as specified and directed by Engr-in-charge.

Supply and fixing for PVC insulated screened PVC round type, electric cables with stranded alumimium conductor of size 10 Sqmm 2 core. compete all as specified and directed by Engr-in-charge.

Supply anf Fix for steel tubular swaged poles completewith cast iron base plate, finial taperplug, bolts, nuts & screws asspecified type 410 SP-22 (9.0 metres long compete all as specified and directed by Engr-in-charge.

M & L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation of electric poles, struts, PCC block including necessary form work and fair finish to exposed surfaces without using extra cement etc. complete all as specified and directed by Engineer-in-Charge.

M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation of electric poles, stay assembly and struts PCC blocks including necessary form work and fair finishing the exposed surface without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in coping of poles etc. with slightly rounded or chamfered angles including necessary form work and fair finishing the exposed surface without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for painting old painted surface of LT PCC pole 9 mtr long and applying of one coat of black and white colour in strips 30cm each upto 1.5 mtrs height from top of PCC foundation block and the remaining surface with one coat of cement base paint incl numbering of poles with synthetic enamel paint white in 80mm high letter over 150 x 230mm yellow base complete all as specified.