Alappuzha Municipality 2024-25-Project No. 553/2024- Interior Works of Shathabdi Mandiram, Alappuzha (Phase II)

Amount

Civil Works

12.45.1 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1

OD73101/2024-2025 Wooden Half Partition by using good quality 16mm Marine ply wood (710 grade) for partition framing and 9mm Marine Plywood ( 710 grade) for two side fixing with 1mm Laminates finish with adhesive, SS screw, and High quality 10 mm glass for Top side, with Self-Adhesive Vinyl White 3M Frosted Film, crom patted RiseOm Brass D Bracket/D Clamp Bracket for Glass and including all fitting accessories etc. complete

OD73102/2024-2025 Wooden Full partition by using good quality 16mm Marine ply wood (710 grade) for partition framing and 9mm Marine Plywood ( 710 grade) for two side fixing with 1mm Laminates finish with adhesive, SS screw, and High quality glass for ventilation, with Self-Adhesive Vinyl White 3M Frosted Film, crom patted RiseOm Brass D Bracket/D Clamp Bracket for Glass and including all fitting accessories etc. complete

OD73103/2024-2025 Flush Door Shutters by using good quality 16mm Marine ply wood (710 grade) for partition framing and 9mm Marine Plywood ( 710 grade) for two side fixing with 1mm Laminates finish with adhesive, SS screw, with Self-Adhesive Vinyl White 3M Frosted Film for glass, high quality heavy inches, mortise and Automatic Door Closer Multifunctional including all fitting accessories etc. complete

OD73104/2024-2025 Wooden Paneling by using good quality 16mm Marine ply wood (710 grade) for partition framing and 9mm Marine Plywood ( 710 grade) for 0ne side fixing with 1mm Laminates finish with adhesive, SS screw, and including all fitting accessories etc. complete

OD73105/2024-2025 Executive Table:- Providing and placing modular type Executive Table with decorative view as per drawings of size, using good quality 16 mm marine plywood , use 2mm thick PVC edge band on visible edge and 0.5 mm on interior surface and shall be machine pasted, Out side 1 mm and inside 0.7mm machine pressed white Laminate finish, drawers and cupboard , with sliding keyboard and wire manager , Provision for CPU/UPS with multi lock and key, Telescopic channel for drawers, auto hinges for cupboard, Steel handle and provide metal square pipe foot rest, as per the architectural Direction, including all fitting accessories etc. complete

OD73106/2024-2025 Supply and Fixing Visitors chair cushioned seat and back with arm rest

OD73107/2024-2025 Semi executive revolving chair, manual lifting cushion seat and back with arm rest

OD73241/2024-2025 Storage and Side Table :- Providing and placing modular type Back and side Table with decorative view as per drawings of size using good quality 16 mm marine plywood , use 2mm thick PVC edge band on visible edge and 0 .5mm on interior surface and shall be machine pasted, Out side 1 mm and inside 0.7mm machine pressed white Laminate finish, cupboard , with door, auto hinges for cupboard, Steel handle as per the architectural Direction, including all fitting accessories etc. completed

15.7.4 Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

13.1.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.83.2 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.Two coats

15.12.1 Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below

11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

OD73246/2024-2025 Providing and fixing Window Curtain - Zebra Roller type with all fittings and Accessories

Electrical and Electronics

OD73421/2024-2025 Supply, installation, testing and commissioning of Floor Mounting Cubical Type UPS PANEL suitable for 415 V, Three Phase, 4 Wire 50 Hz AC supply system having sufficient front surface area fabricated in compartmentalized design from CRCA sheet steel of 2 mm thick for frame works, covers and gland plates, cleaning and finishing complete with 7 tank process for Powder Coating in approved shade and then provided with Clear Coating, having 80 Amps capacity type TPN Aluminium alloy busbars of high conductivity, DMC / SMC / FRP busbar supports, with short circuit withstand capacity of 31 MVA for 1 Sec., bottom base channel of MS section not less than 100 mm x 50 mm x 5 mm thick, fabrication shall be done in transportable sections, entire panel shall have a common copper earth bar of size 25 mm x 3 mm at the rear with 2 Nos. earth stud, solid connections from main busbars to switch gears with approved size of Aluminium busbars and control wiring with 2.5 / 1.5 Sq.mm FRLS (Flame Retardant Low Smoke) or HRFR (Heat Resistant Flame Retardant) PVC insulated single core copper conductor cables, cable alleys etc. complete as required. For all MCCBs Ics shall be 100% Icu. The panel shall conform to the Electrical Inspectorate standards and it shall only be manufactured after getting approval from the Engineer-in-charge, Consultant and the Electrical Inspectorate. BUSBAR 1 Runs of 25 mm x 6 mm Aluminium for each Phase 1 Runs of 25 mm x 6 mm Aluminium for Neutral INCOMER (To UPS) 1 Set - RYB Indication Lamps with Control MCBs 1 Nos - 80A 25kA 4P Thermal Magnetic Type MCCB having 70 to 100% Setting Provision with ROM, Spreader, Shunt Release, ON-OFF-TRIP Auxiliary Contacts and ON (Red), OFF (Green), TRIP (Amber) Indication Lamps with Control MCBs 3 Nos - 80/5A 10VA CL:1 Resin Cast CT 1 Nos - Digital Multifunction Meter measuring V, A, F, KWH, KVA, PF with Control MCBs 1 Nos - Digital Earth Leakage Relay with CBCT and Control MCBs INCOMER (From UPS) 1 Set - RYB Indication Lamps with Control MCBs 1 Nos - 80A 25kA 4P Thermal Magnetic Type MCCB having 70 to 100% Setting Provision with ROM, Spreader, Shunt Release, ON-OFF-TRIP Auxiliary Contacts and ON (Red), OFF (Green), TRIP (Amber) Indication Lamps with Control MCBs 3 Nos - 80/5A 10VA CL:1 Resin Cast CT 1 Nos - Digital Multifunction Meter measuring V, A, F, KWH, KVA, PF with Control MCBs 1 Nos - Digital Earth Leakage Relay with CBCT and Control MCBs OUTGOINGS 12 Nos - 25A 10kA 4P C Curve MCB

OD73474/2024-2025 Supply and installation of 30 kVA Double Conversion Online Modular UPS Frame and its allied accessories etc. complete as required. The Frame and all its allied accessories shall be provided with a replacement warranty of 60 Months. The scope also includes providing AMC for a period of 5 Years for the Frame System with a minimum of 4 visits per year for necessary checking and for doing any preventive maintenance works

OD73475/2024-2025 Supply, installation, testing and commissioning of Double Conversion Online 5KW Module with the following detailed specifications. Input Power Factor 0.99 at Full Load Output Power Factor 1.0 Input Voltage Range 320V to 460V with Cut-off THDi less than or equal to 3% THDv less than 0.5% in linear Load and less than 1% in Non-linear Load DC to AC Efficiency 96% Ambient Temperature 0 to 40 Deg.C Generator Compatibility Pure Sine Wave Battery Over Charge and Under Charge Cut-off Bypass Arrangement Digital Indications of Input Voltage, Input Current, Output Voltage, Output Current and Temperature LCD and LED Display EN / IEC 620401 for General Safety Compatibility EN / IEC 620402 for Electromagnetic Compatibility EN / IEC 620403 for Performance EN / IEC 620404 or PEP for Environmental Compatibility etc. complete as required. (There shall be a Service Centre in the district from the UPS OEM itself). The Module System shall be provided with a replacement warranty of 60 Months. The scope also includes providing AMC for a period of 5 Years for the Module System with a minimum of 4 visits per year for necessary checking and for doing any preventive maintenance works

OD73446/2024-2025 Supply, installation, testing and commissioning of 12V 65Ah C20 Rated SMF Battery of 20 Nos for a minimum backup of 15 minutes for the existing 30 KW Module UPS System with all accessories like racks, interconnecting cables, copper sockets including crimping and providing connections etc. complete as required The Battery and all its accessories shall be provided with a replacement warranty of 36 Months. The scope also includes providing AMC for a period of 5 Years for the Battery System with a minimum of 4 visits per year for necessary checking and for doing any preventive maintenance works

OD73447/2024-2025 Supply, installation, testing and commissioning of 2.0 TR Inverter/Non-Inverter Type Cassette Air Conditioner with Copper Condenser, Cordless Remote Control, R 32 Refrigerant using mounting Stainless Steel suspenders, bolts, nuts, round and spring washers or screws, Heavy Duty Stand for Outdoor Unit etc. complete with connections as required.

OD73448/2024-202 Supply, installation, testing and commissioning of 2.0 TR Inverter Type BEE 3 Star Rated High Wall Split Air Conditioner with Copper Condenser, Cordless Remote Control, R 32 Refrigerant, Copper Pipe of 3m using Stainless Steel bolts, nuts, round and spring washers or screws, Heavy Duty Stand for Outdoor Unit etc. complete with connections as required

OD73434/2024-2025 Supply, installation, testing and commissioning of 1.0 TR Inverter Type BEE 3 Star Rated High Wall Split Air Conditioner with Copper Condenser, Cordless Remote Control, R 32 Refrigerant, Copper Pipe of 3m using Stainless Steel bolts, nuts, round and spring washers or screws, Heavy Duty Stand for Outdoor Unit etc. complete with connections as required

OD73435/2024-2025 Supply, installation, testing and commissioning of Wall Mounting Type Voltage Stabilizer for Air Conditioners up to and including 2.0 TR having Working Voltage Ranging from 170V to 270V, 15A Capacity with Advanced IC Based Design, Intelligent Time Delay System, Thermal Overload Protection, Under / Over Voltage Protection using Stainless Steel bolts, nuts, round and spring washers or screws, 25A / 16A 3 Pin Top for connections etc. complete with connections as required

OD73436/2024-2025 Supply and laying of 2.5 Sq.mm 1.1kV Grade Three Core Round Insulated Copper Conductor and Sheathed Flexible cable with compact construction and high insulation resistance. The cable shall have the specifications of Standard FRLS PVC Insulation, FRLS Sheathing in accordance with IS 694, BS 6500, IEC 60227, DIN VDE-0281, IEC 60754-I IEC, 60332-I, BS 4066-I, ASTMD 2843, ASTMD 2863, Conductor Class 5, Number of Conductor Strands 50, Nominal Diameter of Conductor Strands 0.25mm, Nominal Thickness of Insulation 0.7mm, Nominal Thickness of Sheath 1.0mm, Approximate Overall Diameter 9.6mm, AC Current Rating of 24A, Voltage Drop/Amp/Metre for Single Phase AC 18mV, Maximum Conductor Resistance at 20 Deg.C 7.98 Ohms/Km etc. complete as required

OD73437/2024-2025 Supply, installation, testing and commissioning of Copper Piping System for the existing Cassette Air Conditioner and Additional Copper Piping System for the existing Split Air Conditioner with all necessary accessories and connections etc. complete as required

OD73438/2024-2025 Supply, installation, testing and commissioning of High Quality MIXER AMPLIFIER with all necessary accessories etc. complete as required. The Mixer Amplifier shall have the specifications of Designed for use in wide variety of PA applications specially requiring high quality music, Professional dual channel power, 500 Watts rated output, Built-in MP3 play back facility with remote control, Backlit LCD display, Bluetooth and FM facility, Digital recorder facility, Cut-Boost type treble and bass control for tonal adjustment, Extensive built in protection circuit for smooth and safe operation etc. complete as required

OD73439/2024-2025 Supply, installation, testing and commissioning of High Quality MIXER AMPLIFIER with all necessary accessories etc. complete as required. The Mixer Amplifier shall have the specifications of 5 Mic Inputs, 2 Aux Inputs, Preamplifier Output for connecting to a Booster Amplifier and for recording the programme, Cut type Bass and Treble controls, Instant transfer to DC power (Car Battery) if AC power fails etc. complete as required

OD73440/2024-2025 Supply, installation, testing and commissioning of High Quality AUDIO MIXER with all necessary accessories etc. complete as required. The Audio Mixer shall have the specifications of Compactable and reliable professional PA Mixer, Aesthetically superior and easily portable, Provided with two balanced XLR microphone inputs with switchable +48V Phantom supply, Provision for connecting additional 4 Nos of low impedance microphones in either balanced or unbalanced configuration through a 6.3 mm (1/4 Inches) stereo jack socket, Provision for connecting up to six line level signal sources in either balanced or unbalanced configuration through a 6.3mm (1/4 Inches) stereo jack socket, Each channel having separate GAIN control for optimum adjustment of the MIC and LINE input sensitivities, Two band equalizer with active BASS and TREBLE controls in each channel for desired equalization of the input signal, Separate FX effects level control for each input channel etc. complete as required

OD73441/2024-2025 Supply, installation, testing and commissioning of High Quality AUDIO MIXER with all necessary accessories etc. complete as required. The Audio Mixer shall have the specifications of Built-in Bluetooth wireless streaming from smart phones, tablets and laptops, Built in Recording Facility, 4 Mic/Line Input and 1 Stereo Input, Gain control with 2-band EQ per channel, Built-in echo/delay processor with unique E-delay, Signal and clip LED indication for master level, 1/4 Inches TS unbalanced L/R main output, USB MP3 media player onboard with transport control and IR remote control etc. complete as required

OD73442/2024-2025 Supply, installation, testing and commissioning of High Quality VAK 10 S CONFERENCE CONTROLLER SYSTEM with all necessary accessories etc. complete as required. The Conference Controller System shall have the specifications of Fully automatic one that does not require any operator, User friendly interface with LCD display, Highly flexible and customizable system supporting 4 Chairman and 160 Delegate Units, Balanced XLR and 6.3mm Jack Master output, AUX and Line output for recording or monitoring etc. complete as required

OD73443/2024-2025 Supply, installation, testing and commissioning of High Quality Detachable and Flexible GOOSENECK MICROPHONE with all necessary accessories etc. complete as required. The Gooseneck Microphone shall have the specifications of ON-OFF Talk Switch, High Quality capsule etc. complete as required

OD73444/2024-2025 Supply, installation, testing and commissioning of High Quality GOOSENECK MICROPHONE BASE with all necessary accessories etc. complete as required. The Gooseneck Microphone Base shall have the specifications of sturdy and heavy duty base made of die-cast Aluminium suitable for electret condenser gooseneck microphones, female XLR connector for directly mounting the gooseneck microphone and a male XLR socket at the rear for connecting standard microphone cable to the amplifier, Heavy weight housing with anti-skid feet that ensures stability, 10m twin core shielded low noise mic cable with XLR connector and 6.3mm (1/4 Inches) phone plug, Built-in cell housing for 2xUM-3 pencil cells (3V) for operating the condenser microphone, ON-OFF Switch, Special electronic circuitry for minimal switch noise etc. complete as required

OD73464/2024-2025 Supply, installation, testing and commissioning of High Quality PA GOOSENECK MICROPHONE with all necessary accessories excluding base etc. complete as required. The Gooseneck Microphone shall have the specifications of sleek and slender design, Wide frequency response, High front-to-back rejection for more gain before feedback, Built-in XLR socket, suitable for various PA applications such as on Lecterns and Podiums, Open Conferences etc. complete as required

OD73465/2024-2025 Supply, installation, testing and commissioning of High Quality HEADBAND MICROPHONE with all necessary accessories etc. complete as required. The Headband Microphone shall have the specifications of Uni-directional pick up pattern, External windscreen to reduce wind and pop noise, Terminated with 3pin mini-XLR connector for use with suitable bodypack transmitter of wireless microphone system, able to be used in classrooms, presentations, live performances, places of worships etc. complete as required

OD73466/2024-2025 Supply, installation, testing and commissioning of High Quality UHF band frequency duet WIRELESS MICROPHONE SYSTEM with all necessary accessories etc. complete as required. The Wireless Microphone System shall have the specifications of Individual channel output with level control and mix output, Display on Transmitter and Receiver for frequency indication, provision for using two microphones at the same time, one handheld and one lapel microphones etc. complete as required

OD73467/2024-2025 Supply, installation, testing and commissioning of High Quality TWO-WAY PASSIVE SPEAKERS in a Plastic Moulded Cabinet with all accessories like Wall Mounting Stand etc. complete as required. The Speaker shall have the specifications of quality Heavy Duty Plastic Moulded Cabinets, Integral stand mounting socket, Parallel input connectors allow linking of additional speakers etc. complete as required

OD73469/2024-2025 Supply and laying of High Quality MICROPHONE CABLE with all necessary connections etc. complete as required

OD73470/2024-2025 Supply and laying of High Quality MOBILE CORD of 5m length with all necessary connections etc. complete as required

OD73471/2024-2025 Supply and laying of High Quality LOOPING CORD of 1.5m length with all necessary connections etc. complete as required

OD73472/2024-2025 Supply and fixing of High Quality 8 PIN MALE CABLE CONNECTORS with all necessary connections etc. complete as required

OD73445/2024-2025 Supply and fixing of High Quality 8 PIN FEMALE CABLE CONNECTORS with all necessary connections etc. complete as required

OD73422/2024-2025 Supply and fixing of High Quality ELCOM SOCKET with all necessary connections etc. complete as required

OD73423/2024-2025 Supply and fixing of High Quality PRO-M JACK with all necessary connections etc. complete as required

OD73424/2024-2025 Supply and fixing of High Quality P38 JAK with all necessary connections etc. complete as required

OD73425/2024-2025 Supply and fixing of High Quality XLR FEMALE CONNECTOR with all necessary connections etc. complete as required

OD73426/2024-2025 Supply and fixing of High Quality SPEAKON (ORBISFX/SR) with all necessary connections etc. complete as required

OD73427/2024-2025 Supply and fixing of High Quality CO BOX with all necessary accessories etc. complete as required

OD73428/2024-2025 Supply, installation, testing and commissioning of High Quality EPSON LCD PROJECTOR EB-FH06 with all necessary connections etc. complete as required

OD73429/2024-2025 Supply, installation, testing and commissioning of High Quality 120 Inches MOTRISED SCREEN (10 X 8 Feet) with all necessary connections etc. complete as required

OD73430/2024-2025 Supply and fixing of High Quality CEILLING MOUNT STAND with all necessary accessories etc. complete as required

OD73431/2024-2025 Supply and laying of High Quality HDMI CABLE 20m with all necessary connections etc. complete as required

OD73432/2024-2025 Supply and laying of High Quality HDMI CABLE 5m with all necessary connections etc. complete as required

OD73433/2024-2025 Supply and fixing of High Quality HDMI SPLITTER 1 Input + 4 Output Smart pro with all necessary connections etc. complete as required

EXCLUSIVE OF GST

Note :1 All materials, Items, Equipment shall be best branded items with IS and approved by client/KEL

2:Rate should be inclusive of Insurance,Transportation, delivery and installation cost for all items

3.Rate should be Exclusive of GST.

4.Work should be executed as per DSR/PWD specification and direction of Engineer at site.

5.CEMENT: Make use Malabar cement only as per Govt. direction and in case of non availabilty of Malabar cement use Ultra Tech, Dalmia, Ramco or eq. brand in the order of preference.

6.VETRIFIED FLOOR TILES/ CERAMIC GLAZED WALL TILES: Make: Khajaria, Jhonson, RAK, NITCO, Cera or Eq. in the order of preference and prior sample approval from KEL, Client

9. ACRYLIC SMOOTH EXTERIOR PAINT/ SYNTHETIC ENAMEL PAINT/WHITE CEMENT BASED PUTTY/ CEMENT PRIMER: Make: Asian, Berger, Nerolas or eq. in the order of pref.

10.Rigid PVCPipes/Casing & Capping - A-ONE/REPUTED MAKE with ISI , Precession, Balco, GEO

11.ELECTRICAL: Note: Rate should be inclusive of preparation of schematic diagram and getting approval from KSEB/Electrical Inspectorate. Statutory fees paid to KSEB/EI shall be paid by us separately.

Make of Electrical equipments/materials

All electrical materials/equipments shall be of best branded items with ISI, strictly as per schedule specification

Switches/Sockets/Regulators - SCHEIDER/ABB/HAVELS/LEGRAND or equivalent

BUILDUS iCS LLP (BID ID -2166486)

OXIRA ENVIRONMENTAL SOLUTION PRIVATE LIMITED (BID ID -2166636)