Line Extension-OYEC in favour of EXECUTIVE DIRECTOR ( 1157136016447 ) under Electrical Section, Keerampara

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.

Drilling hole of various sizes on existing Channel/Cross Arm.

Installing one DTR Meter with box on existing poles and giving the complete connections incl. conveyance of materials.

Erecting one 100kVA Transformer to existing DP and giving connections, incl. loading & unloading, excluding transportation.

Fiting One no MVT on existing cross arm excluding termination work (for One phase) of any rating for 11 kV AB Cable

Doing one cable end termination on HT ABC of sizes Up to 3x150+1x120 sqmm

Dismantling (without damage) one LT PSC/RCC Strut pole incl. removal of clamps and stacking.

Additional rate for excavation of one Earth Pit (2.5m depth) in Hard Laterite.

Fitting one Additional 2.4m/3m Channel cross arm (75x40x6mm), in existing 11kV DP incl. conveyance of materials.

Providing one Earth using earth pipe incl. digging separate pit at standard distance away from the pole/structure & backfilling.

Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling.

Erection of suspension clamp for 11KV ABC of any size

Fitting and providing one HT Stay for 11kV pole incl.digging & back filling pit.

Additional rate for refitting/redoing one Shackle set and reshackling one span while renewing any type of pole.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Laterite.

Additional rate for excavation of one Earth Pit (2.5m depth) in Laterite.

Providing Cable Tie

Additional rate for excavation of one Pit for HT Pole/HT Stay in Hard Laterite.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Soft Rock.

Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification).

Erection of Anchor clamp / dead end clamp for 11kV ABC of any size

Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials.

Fitting 6 channel cross arms, AB switch, DO fuse, LA, HT & LT connections on existing DP, 3 LT fuses.

Providing yard metalling with 6mm & 40mm thick blue metal as specified after constructing a curb wall.

Providing Transformer fencing , using 50x50x6mm Angle iron, 40 x 6 mm MS flat and 8 mm MS rod as specified, incl cost of transportation & foundation

Erection of LT 2 way distribution box on existing cross arm giving connection incl. cable and earth connection (excluding earthing).

Fitting one set (3No.) 11kV LA and giving connections excluding earthing.

Fitting one set AB switch and giving connection

Dismantling (without damage) LT stay incl. digging pit in all classes of soil and backfilling

Fitting and erecting one HT PSC Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Rock.

Fitting one No. Section fuse on LT line with dropping cables, crimping sockets, connecting with bolt&nut etc.

Dismantling one section fuse

Stringing of 11 kV Aerial bunched cable of size 3 x 120 + 1 x 95 sqmm with bare/insulated Messenger through existing poles

Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Loading LT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Transporting Transformers by hired vehicle upto 5km and upto 2 No. of 63 to 250kVA Transformers / RMUs excluding loading & unloading.

Fitting and erecting one HT DP using PSC pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.

Fitting and providing one Strut using HT PSC pole incl. digging & back filling pit.

Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of materials.

Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion.

Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion.

Transferring LT Sph 2/3 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.

Transferring LT 3ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.

Providing/Inserting 2 line spacer on the existing LT OH line.

Providing/Inserting 3 line spacer on the existing LT OH line.

Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole and reconnecting.

Please Enable Macros to View BoQ information