TVC Division :-Improvements to TRD Section in divisional office complex.

& Vol- II ) - Except reinforcement steel.)

Item- 1 Name of work : TVC Division :-Improvements to TRD Section in divisional office complex.

S No. Item No Description of Item Unit Qty Rate Amount

4.0 CONCRETE WORK

4.1S CEMENT CONCRETE (CAST IN SITU)

Providing and laying in position cement

concrete of specified grade excluding the cost

of centering and shuttering - All work up to

derived from natural sources : 4 graded stone

aggregate 20 mm nominal size derived from

natural sources)

6.0 MASONRY WORK

Brick work with common burnt clay F.P.S. (non

modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V

level in all shapes and sizes in :

THIRUVANANTHAPURAM DIV-ENGG/SOUTHERN RLY

9.0 WOOD AND P.V.C. WORK

9.1S FRAMES AND TRUSSES

Providing wood work in frames of doors,

windows, clerestory windows and other frames,

wrought framed and fixed in position with hold

fast lugs or with dash fasteners of required dia

& length (hold fast lugs or dash fastener shall

be paid for separately).

9.1.3 Kiln seasoned and chemically treated hollock cum .05 74199.7 3709.99

Providing and fixing panelled or panelled and

glazed shutters for doors, windows and

clerestory windows, fixing with butt hinges of

required size with necessary screws, excluding

panelling which will be paid for separately, all

complete as per direction of Engineer-in-charge.

(Note:- Butt hinges and necessary screws shall

be paid separately)

Kiln seasoned and chemically treated hollock

Providing and fixing panelling or panelling and

glazing in panelled or panelled and glazed

shutters for doors, windows and clerestory

windows (Area of opening for panel inserts

excluding portion inside grooves or rebates to

be measured). Panelling for panelled or

panelled and glazed shutters 25 mm to 40 mm

9.7.2 Kiln seasoned and chemically treated hollock Sqm 1.8 2039.8 3671.64

9.40S MISCELLANEOUS-WOOD WORK

Providing and fixing chromium plated brass

curtain rod having wall thickness of 1.25mm

9.46 with two chromium plated brass brackets fixed

with C.P. brass screws and PVC sleeves etc.,

wherever necessary complete :

Providing and fixing M.S. grills of required

pattern in frames of windows etc. with M.S.

9.48 flats, square or round bars etc. including

priming coat with approved steel primer all

9.48.2 Fixed to openings /wooden frames with rawl Kg 1100 197.7 217470

plugs screws etc.

COPER OXIDISED MILD STEEL FITTINGS

(COPPER OXIDISED AS PER IS: 1378)

Providing and fixing ISI marked oxidised M.S.

tower bolt black finish, (Barrel type) with

necessary screws etc. complete : (copper

oxized as per IS: 1378)

9.72S BRASS FITTINGS

Providing and fixing bright finished brass butt

hinges with necessary screws etc. complete :

Providing and fixing bright finished brass tower

9.74 bolts (barrel type) with necessary screws etc.

9.82 Providing and fixing bright finished brass Each 3 109.6 328.8

12 hanging type floor door stopper with necessary

screws, etc. complete.

THIRUVANANTHAPURAM DIV-ENGG/SOUTHERN RLY

9.83 Providing and fixing aluminium die cast body Each 3 1025.65 3076.95

tubular type universal hydraulic door closer

(having brand logo with ISI, IS : 3564, embossed

on the body, door weight upto 35 kg and door

width upto 700 mm), with necessary

accessories and screws etc. complete.

9.88S CHROMIUM PLATED BRASS FITTINGS

9.88 Providing and fixing chromium plated brass 100 Each 1 817.5 817.5

mm mortice latch and lock with 6 levers and a

pair of lever handles of approved quality with

necessary screws etc. complete.

9.105S GYPSUM BOARD PARTITIONS

9.121 Providing and fixing Fiber Glass Reinforced Metre 60.51 702.6 42514.33

plastic (FRP) Door Frames of cross-section 90

mm x 45 mm having single rebate of 32 mm x

15 mm to receive shutter of 30 mm thickness.

The laminate shall be moulded with fire

resistant grade unsaturated polyester resin and

chopped mat. Door frame laminate shall be

2mm thick and shall be filled with suitable

wooden block in all the three legs. The frame

shall be covered with fiber glass from all sides.

M.S. stay shall be provided at the bottom to

steady the frame.

9.122 Providing and fixing to existing door frames.

9.122.2 30 mm thick Fiberglass Reinforced Plastic Sqm 15.13 3963.7 59970.78

(F.R.P.) flush door shutter in different plain and

wood finish made with fire retardant grade

unsaturated polyester resin, moulded to 3 mm

thick FRP laminate all around, with suitable

wooden blocks inside at required places for

fixing of fittings and polyurethane foam

(PUF)/Polystyrene foam to be used as filler

material throughout the hollow panel, casted

monolithically with testing parameters of F.R.P.

laminate conforming to table - 3 of IS: 14856,

complete as per direction of Engineer-in-charge.

Providing and fixing factory made uPVC white

colour sliding glazed window upto 1.50 m in

height dimension comprising of uPVC multi-

chambered frame with in-built roller track and

sash extruded profiles duly reinforced with 1.60

+/- 0.2 mm thick galvanized mild steel section

made from roll forming process of required

length (shape & size according to uPVC profile),

appropriate dimension of uPVC extruded

glazing beads and uPVC extruded interlocks,

EPDM gasket, wool pile, zinc alloy (white

powder coated) touch locks with hook, zinc

alloy body with single nylon rollers (weight

bearing capacity to be 40 kg), G.I fasteners 100

9.147D x 8 mm size for fixing frame to finished wall and

necessary stainless steel screws etc. Profile of

frame & sash shall be mitred cut and fusion

welded at all corners, including drilling of holes

for fixing hardware's and drainage of water etc.

After fixing frame the gap between frame and

adjacent finished wall shall be filled with

weather proof silicon sealent over backer rod of

required size and of approved quality, all

complete as per approved drawing & direction

of Engineer-in-Charge. (Single / double glass

panes, wire mesh and silicon sealent shall be

paid separately). Variation in profile dimension

in higher side shall be accepted but no extra

payment on this account shall be made.

THIRUVANANTHAPURAM DIV-ENGG/SOUTHERN RLY

9.147D.5 Three track three panels sliding window made Sqm 4.96 9183.3 45549.17

of (big series) frame 116 x 45 mm & sash 46 x

62 mm both having wall thickness of 2.3 +/- 0.2

mm and single glazing bead / double glazing

bead of appropriate dimension. (Area of window

above 1.75 sqm)

Providing and fixing factory made uPVC white

colour sliding glazed window above 1.50 m in

height dimension comprising of uPVC multi-

chambered frame with in-built roller track and

sash extruded profiles duly reinforced with 1.60

+/- 0.2 mm thick galvanized mild steel section

made from roll forming process of required

length (shape & size according to uPVC profile),

appropriate dimension of uPVC extruded

glazing beads, uPVC extruded interlocks and

uPVC extruded Inline sash adaptor (if required),

EPDM gasket, wool pile, zinc alloy (white

powder coated) handle on one side of extreme

panel along with zinc plated mild steel multi

point locking having transmission gear with

keeps, zinc alloy (white powder coated) touch

lock with hook (if required for wire mesh panel),

9.147E stainless steel (SS 304 grade) body with

adjustable double nylon rollers (weight bearing

capacity to be 120 kg), G.I fasteners 100 x 8

mm size for fixing frame to finished wall and

necessary stainless steel screws etc. Profile of

frame & sash shall be mitred cut and fusion

welded at all corners, including drilling of holes

for fixing hardware's and drainage of water etc.

After fixing frame the gap between frame and

adjacent finished wall shall be filled with

weather proof silicon sealent over backer rod of

required size and of approved quality, all

complete as per approved drawing & direction

of Engineer-in-Charge. (Single / double glass

panes, wire mesh and silicon sealent shall be

paid separately). Variation in profile dimension

in higher side shall be accepted but no extra

payment on this account shall be made.

9.147E.2 Two track four panels sliding window made of Sqm 30.24 6783.7 205139.09

(big series) frame 67 x 50 mm & sash 46 x 62

mm both having wall thickness of 2.3 +/- 0.2

mm and single glazing bead / double glazing

bead of appropriate dimension. (Area of window

above 4.00 sqm upto 8.00 sqm).

9.150 Providing and fixing zinc alloyed (white powder Each 9 167.15 1504.35

19 coated) touch lock for uPVC sliding window with

necessary screws etc. complete.

9.151 Providing and fixing steel roller for uPVC sliding Each 36 94.9 3416.4

window with necessary screws etc. complete.

9.153 Providing and fixing steel (white power coated) Each 4 161.8 647.2

21 crescent lock for uPVC sliding window/ door with

necessary screws etc. complete.

11.0 FLOORING

11.37S CERAMIC GLAZED TILES

11.37A Providing and fixing 1st quality ceramic glazed Sqm 90 938.5 84465

floor tiles conforming to IS : 15622 (thickness to

be specified by the manufacturer ) of approved

make in all colours, shades except burgundy,

bottle green, black of any size as approved by

22 Engineer-in-Charge in skirting, risers of steps

and dados over 12 mm thick bed of cement

Mortar 1:3 (1 cement: 3 coarse sand) and

jointing with grey cement slurry @ 3.3kg per

sqm including pointing in white cement mixed

with pigment of matching shade complete.

THIRUVANANTHAPURAM DIV-ENGG/SOUTHERN RLY

11.40 Providing and laying rectified Glazed Ceramic Sqm 25.96 1225.1 31803.6

floor tiles of size 300x300 mm or more

(thickness to be specified by the manufacturer),

of 1st quality conforming to IS : 15622, of

approved make, in all colours, shades, except

23 White, Ivory, Grey, Fume Red Brown, laid on 20

mm thick Cement Mortar 1:4 (1 Cement : 4

Coarse sand), jointing with grey cement slurry

@ 3.3 kg/ sqm including pointing the joints with

white cement and matching pigments etc.,

11.41S VITRIFIED FLOOR TILES

Providing and laying Vitrified tiles in floor in

different sizes (thickness to be specified by the

manufacturer) with water absorption less than

0.08% and conforming to IS:15622, of approved

brand & manufacturer, in all colours and shade,

laid on 20 mm thick cement mortar 1:4 (1

cement: 4 coarse sand) jointing with grey

11.41A cement slurry @3.3 kg/sqm including grouting

t h e joints with white cement and matching

pigments etc. The tiles must be cut with the

zero chipping diamond cutter only . Laying of

tiles will be done with the notch trowel, plier,

wedge, clips of required thickness, leveling

system and rubber mallet for placing the tiles

gently and easily.

11.41A.2 Glazed vitrified floor tiles polished finish of size

11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size

11.43 Fixing glazed/ Ceramic/ Vitrified floor tiles with Sqm 163.42 633.6 103542.91

cement based high polymer modified quick-set

tile adhesive (Water based) conforming to IS:

15477, in average 3mm thickness.

Providing and laying flamed finish Granite stone

flooring in required design and patterns, in

linear as well as curvilinear portions of the

building all complete as per the architectural

drawings with 18 mm thick stone slab over 20

mm (average) thick base of cement mortar 1:4

(1 cement : 4 coarse sand) laid and jointed with

cement slurry and pointing with white cement

slurry admixed with pigment of matching shade

including rubbing, curing and polishing etc. all

complete as specified and as directed by the

Engineer-in-Charge :

11.55.1 Flamed finish granite stone slab Jet Black, Sqm 1.68 2589.9 4351.03

Cherry Red, Elite Brown, Cat Eye or equivalent.

12.0 ROOFING

Providing, fixing and embedding sand cast iron

accessories for rain water pipes in the masonry

12.40 surrounded with 12 mm thick cement mortar of

the same mix, as that of masonry (lead caulking

will be paid for separately):

Providing and fixing on wall face unplasticised

Rigid PVC rain water pipes conforming to IS :

12.41 13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for

thermal expansion, (i) Single socketed pipes.

Providing and fixing on wall face unplasticised -

PVC moulded fittings/ accessories for

unplasticised Rigid PVC rain water pipes

conforming to IS : 13592 Type A, including

jointing with seal ring conforming to IS : 5382,

leaving 10 mm gap for thermal expansion.

THIRUVANANTHAPURAM DIV-ENGG/SOUTHERN RLY

Providing and fixing tiled false ceiling of

specified materials of size 595x595 mm in true

horizontal level, suspended on inter locking

metal grid of hot dipped galvanized steel

sections ( galvanized @ 120 grams/ sqm, both

side inclusive) consisting of main "T" runner

with suitably spaced joints to get required

length and of size 24x38 mm made from 0.30

mm thick (minimum) sheet, spaced at 1200 mm

center to center and cross "T" of size 24x25 mm

made of 0.30 mm thick (minimum) sheet, 1200

mm long spaced between main "T" at 600 mm

center to center to form a grid of 1200x600 mm

and secondary cross "T" of length 600 mm and

size 24x25 mm made of 0.30 mm thick

(minimum) sheet to be interlocked at middle of

the 1200x600 mm panel to form grids of

600x600 mm and wall angle of size 24x24x0.3

mm and laying false ceiling tiles of approved

texture in the grid including, required

cutting/making, opening for services like

diffusers, grills, light fittings, fixtures, smoke

detectors etc. Main "T" runners to be suspended

from ceiling using GI slotted cleats of size 27 x

37 x 25 x1.6 mm fixed to ceiling with 12.5 mm

dia and 50 mm long dash fasteners, 4 mm GI

adjustable rods with galvanised butterfly level

clips of size 85 x 30 x 0.8 mm spaced at 1200

mm center to center along main T, bottom

exposed width of 24 mm of all T-sections shall

be pre-painted with polyester paint, all

complete for all heights as per specifications,

drawings and as directed by Engineer-in-

12.52.3 12.5 mm thick square edge PVC Laminated Sqm 163.42 1948.95 318497.41

Gypsum Tile of size 595x595 mm, made of

Gypsum plasterboard, manufactured from

natural gypsum as per IS 2095 part I and

laminated with white 0.16mm thick fire

retardant PVC film on the face side and

12micron metalized polyester on the back side

with all edges sealed with the face side PVC film

which goes around and wraps the edges and is

bonded to the edges and the back side

metalized polyester film so as to make the tile a

completely sealed unit.

13.0 FINISHING

13.1S CEMENT PLASTER (IN FINE SAND)

13.1 12 mm cement plaster of mix :

CEMENT PLASTER WITH A FLOATING COAT OF

Cement plaster 1:3 (1 cement: 3 coarse sand)

finished with a floating coat of neat cement.

13.16S 6MM CEMENT PLASTER

13.16 6 mm cement plaster of mix :

Applying one coat of water thinnable cement

13.43 primer of approved brand and manufacture on

13.44S EXTERIOR FINISHING

Finishing with Deluxe Multi surface paint system

13.48 for interiors and exteriors using Primer as per

manufacturers specifications :

THIRUVANANTHAPURAM DIV-ENGG/SOUTHERN RLY

13.48.1 Two or more coats applied on walls @ 1.25 Sqm 100 158.95 15895

34 ltr/10 sqm over and including one coat of

Special primer applied @ 0.75 ltr /10 sqm

13.50 Applying priming coat:

13.50.3 With ready mixed red oxide zinc chromate Sqm 25 55.5 1387.5

35 primer of approved brand and manufacture on

steel galvanised iron/ steel works

Finishing with Epoxy paint (two or more coats)

at all locations prepared and applied as per

13.52 manufacturer's specifications including

appropriate priming coat, preparation of

surface, etc. complete.

Painting with synthetic enamel paint of

13.61 approved brand and manufacture to give an

Wall painting with acrylic emulsion paint,

having VOC (Volatile Organic Compound )

content less than 50 grams/ litre, of approved

brand and manufacture, including applying

additional coats wherever required, to achieve

even shade and colour.

Applying priming coats with primer of approved

13.85 brand and manufacture, having low VOC

(Volatile Organic Compound ) content.

13.114 Melamine polishing on wood work (one or more Sqm 2 118.35 236.7

14.0 REPAIRS TO BUILDING

14.75AS ROUTINE MAINTENANCE WORK

14.83 Hacking of CC flooring including cleaning for Sqm 15 2.85 42.75

40 surface etc. complete as per direction of the

Engineer-in-Charge.

15.0 DISMANTLING AND DEMOLISHING

Demolishing cement concrete manually/ by

mechanical means including disposal of

material within 50 metres lead as per direction

of Engineer - in - charge.

15.2.1 Nominal concrete 1:3:6 or richer mix (i/c cum 3 2007.1 6021.3

equivalent design mix)

15.3 Demolishing R.C.C. work manually/ by cum 1.58 2928.1 4626.4

mechanical means including stacking of steel

42 bars and disposal of unserviceable material

within 50 metres lead as per direction of

Engineer - in- charge.

Demolishing brick work manually/ by

mechanical means including stacking of

15.7 serviceable material and disposal of

unserviceable material within 50 metres lead as

per direction of Engineer-in-charge.

Dismantling doors, windows and clerestory

windows (steel or wood) shutter including

chowkhats, architrave, holdfasts etc. complete

and stacking within 50 metres lead :

15.19 Dismantling steel work manually/ by Kg 1176.78 3.2 3765.7

mechanical means in built up sections without

dismembering and stacking within 50 metres

lead as per direction of Engineer-in-charge.

Dismantling tile work in floors and roofs laid in

15.23 cement mortar including stacking material

within 50 metres lead.

THIRUVANANTHAPURAM DIV-ENGG/SOUTHERN RLY

Dismantling wooden boardings in lining of walls

15.39 and partitions, excluding supporting members

but including stacking within 50 metres lead :

15.52 Dismantling of flushing cistern of all types Each 8 744.6 5956.8

(C.I./PVC/Vitrious China) including stacking of

useful materials near the site and disposal of

unserviceable materials within 50 metres lead.

15.56 Dismantling old plaster or skirting raking out Sqm 50 45.05 2252.5

joints and cleaning the surface for plaster

including disposal of rubbish to the dumping

ground within 50 metres lead.

15.57 Dismantling aluminium/ Gypsum partitions, Sqm 98.05 46.5 4559.33

doors, windows, fixed glazing and false ceiling

51 including disposal of unserviceable material and

stacking of serviceable material with in 50

meters lead as directed by Engineer-in-charge.

15.60 Disposal of building rubbish / malba / similar cum 20 219.35 4387

unserviceable, dismantled or waste materials

by mechanical means, including loading,

52 transporting, unloading to approved municipal

dumping ground or as approved by Engineer-in-

charge, beyond 50 m initial lead, for all leads

including all lifts involved.

17.0 SANITARY INSTALLATIONS

Providing and fixing white vitreous china

pedestal type water closet (European type W.C.

pan) with seat and lid, 10 litre low level white

P.V.C. flushing cistern, including flush pipe, with

manually controlled device (handle lever),

conforming to IS : 7231, with all fittings and

fixtures complete, including cutting and making

good the walls and floors wherever required :

17.2.1 W.C. pan with ISI marked white solid plastic Each 5 5540.55 27702.75

Providing and fixing Stainless Steel A ISI 304

(18/8) kitchen sink as per IS:13983 with C.I.

brackets and stainless steel plug 40 mm,

including painting of fittings and brackets,

cutting and making good the walls wherever

17.10.1 Kitchen sink with drain board

Cutting chases in brick masonry walls for

following diameter sand cast iron/centrifugally

cast (spun) iron pipes and making good the

same with cement concrete 1:3:6 ( 1 cement : 3

coarse sand :6 graded stone aggregate 12.5

mm nominal size), including necessary plaster

and pointing in cement mortar 1:4 (1 cement : 4

18.0 WATER SUPPLY

18.4S PP-R PIPES

THIRUVANANTHAPURAM DIV-ENGG/SOUTHERN RLY

Providing and fixing 3 layer PP-R (Poly

propylene Random copolymer) pipes confirming

to IS:15801 UV stabilized & anti - microbial

fusion welded, having thermal stability for hot &

18.6 cold water supply, including all PP - R plain &

brass threaded polypropylene random fittings,

including trenching, refilling & testing of joints

complete as per direction of Engineer-in-

Charge. -External work

18.7S C.P.V.C. PIPES

Providing and fixing Chlorinated Polyvinyl

Chloride (CPVC) pipes, having thermal stability

for hot & cold water supply, including all CPVC

plain & brass threaded fittings, including fixing

18.7 the pipe with clamps at 1.00 m spacing. This

includes jointing of pipes & fittings with one

step CPVC solvent cement and testing of joints

complete as per direction of Engineer in

Charge.-Internal work - Exposed on wall

Providing and fixing Chlorinated Polyvinyl

Chloride (CPVC) pipes, having thermal stability

for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the

pipe with clamps at 1.00 m spacing. This

includes jointing of pipes & fittings with one

step CPVC solvent cement and the cost of

cutting chases and making good the same

including testing of joints complete as per

direction of Engineer in Charge, Concealed

work, including cutting chases and making good

18.15S BRASS FITTINGS

Providing and fixing gun metal gate valve with

C.I. wheel of approved quality (screwed end) :

C.I. SLUICE VALVES/ FIRE HYDRANTS &

18.48 Providing and placing on terrace (at all floor Litre 3000 9.7 29100

levels) polyethylene water storage tank, IS :

12701 marked, with cover and suitable locking

arrangement and making necessary holes for

inlet, outlet and overflow pipes but without

fittings and the base support for tank.

Providing and fixing PTMT grating of approved

quality and colour.

18.58.2 Rectangular type with openable circular lid

18.58.2.1 150 mm nominal size square 100 mm diameter Each 10 169.7 1697

of the inner hinged round grating

18.59S AIR VALVE & WATER METER (BULK TYPE)

Providing and fixing PTMT Ball cock of approved

quality, colour and make complete with Epoxy

coated aluminium rod with L.P./ H.P.H.D. plastic

18.62.3 25 mm nominal bore, 152mm long, weighing Each 5 459.4 2297

not less than 440 gms

18.64 Providing and fixing PTMT swivelling shower, 15 Each 2 106.15 212.3

66 mm nominal bore, weighing not less than 40

21.0 ALUMINIUM WORK

THIRUVANANTHAPURAM DIV-ENGG/SOUTHERN RLY

Providing and fixing aluminium work for doors,

windows, ventilators and partitions with

extruded built up standard tubular sections/

appropriate Z sections and other sections of

approved make conforming to IS: 733 and IS:

1285, fixing with dash fasteners of required dia

and size, including necessary filling up the gaps

at junctions, i.e. at top, bottom and sides with

21.1 required EPDM rubber/ neoprene gasket etc.

Aluminium sections shall be smooth, rust free,

straight, mitred and jointed mechanically

wherever required including cleat angle,

Aluminium snap beading for glazing / paneling,

C.P. brass / stainless steel screws, all complete

as per architectural drawings and the directions

of Engineer-in-charge. (Glazing, paneling and

dash fasteners to be paid for separately) :

21.1.1 For fixed portion

21.1.1.2 Powder coated aluminium (minimum thickness Kg 170 466.3 79271

of powder coating 50 micron)

For shutters of doors, windows & ventilators

including providing and fixing hinges/ pivots

and making provision for fixing of fittings

wherever required including the cost of EPDM

rubber / neoprene gasket required (Fittings

shall be paid for separately)

21.1.2.2 Powder coated aluminium (minimum thickness Kg 150 564.8 84720

of powder coating 50 micron)

Providing and fixing glazing in aluminium door,

window, ventilator shutters and partitions etc.

with EPDM rubber / neoprene gasket etc.

21.3 complete as per the architectural drawings and

the directions of engineer-in-charge . (Cost of

aluminium snap beading shall be paid in basic

21.3.1 With float glass panes of 4.0 mm thickness Sqm 5 1019.8 5099

(weight not less than 10kg/sqm)

21.3.2 With float glass panes of 5 mm thickness Sqm 38 1325.55 50370.9

(weight not less than 12.50 kg/sqm)

21.17 Providing and fixing anodised aluminium grill Kg 4.5 560.85 2523.83

(anodised transparent or dyed to required

shade according to IS: 1868 with minimum

anodic coating of grade AC 15) of approved

design/pattern, with approved standard section

and fixed to the existing window frame with C.P.

brass/ stainless steel screws @ 200 mm centre

to centre, including cutting the grill to proper

opening size for fixing and operation of handles

and fixing approved anodised aluminium

standard section around the opening, all

complete as per requirement and direction of

Engineer-in-charge. (Only weight of grill to be

measured for payment).

21.18 Providing and fixing 12 mm thick frameless Sqm 2.1 4540.7 9535.47

toughened glass door shutter of approved

brand and manufacture, including providing and

fixing top & bottom pivot & double acting

72 hydraulic floor spring type fixing arrangement

and making necessary holes etc. for fixing

required door fittings, all complete as per

direction of Engineer-in-charge (Door handle,

lock and stopper etc.to be paid separately).

26.0 NEW TECHNOLOGIES AND MATERIALS

THIRUVANANTHAPURAM DIV-ENGG/SOUTHERN RLY

26.10 Providing and fixing factory made Kitchen Sqm 3 4767.8 14303.4

Cabinet Shutter/Partition 20 mm nominal

thickness of approved shade, quality and make,

made from rigid foam sheets (Single extruded)

having density 600 Kg/cum and laminated on

both side by laminate Sheet/PVC foil lamination.

73 The exposed edges shall be sealed with PVC

edge beading of same shade and colour. The

shutter shall be fire retardant having necessary

screw holding capacity. Shutter shall be fixed to

frame using approved hinges with necessary

stainless steel screws, all complete as per

direction of Engineer-in-charge.