S/R to Division Office Building, Bhadrak for the Year 2025-26

Filling with sand well watered and compacted with appropriate rammer or mechanical compactor and top surface dressed and levelled to proper gradient as per direction of the Engineer-in-charge including watering and ramming with cost conveyance, royalities, taxes of all materials and labour with required for the work etc. complete as per specification and direction of the Engineer-In-charge.

Cement concrete of proportion 1:3:6 in foundation using 4cm size black broken granite stone aggregates of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm 6" thick to the required level ramming, watering, curing etc. complete including cost and conveyance royality taxes of all materials and labour with required for the work as per specification and direction of the Engineer-In-charge.

Fly Ash Brick masonary brick size of 25x12x8 c.m having crushing srength not less than 75kg per cm2 with dimension tolerance 8percent in C.M.1:6 in Superstructure including cost, conveyance, royalty and taxes of all materials, labour etc. complete including watering and curing for required period as per specification and direction of the Engineer-In-charge. 2nd floor

RCC work of M-20 grade Lintel having a minimum compreshive srength 150kg per cm2 in 150mm cubes at 28 days curing after mixing and test conducted in accordance with I.S 456 and I.S 516 using black hard crusher broken granaite chipsof 20mm and down-grade size not exceeding 25percent of approved quality including hoisting and laying placing in position concrete watering and curing for 28 days including cost of rigid and smooth stool centering and shuttering with C.M plaster 1:2 at no extra cost where necessery and cost, conveyance, royality and taxes of all materials labour required for the work etc. complete but excluding cost of M.S. Rod or Tor steel and binding and tying the grills and placing in position etc.complete. The materials used in the work and finished item of work shall confirm to relevant I.S specification and as per specification and direction of the Engineer-In-charge. The testing charges will be borne by the contractor

Providing HYSD bar reinforcement Fe 415 MS round bars required for R.C.C. works including cost and conveyance of tested M.S. or T.S. rods and binding wire of 18 to20 gauge, including labour charges for straightening , cutting,bending,binding,and welding if required and tying the grills and placing in proper position as required incase of availability of rods in Departmental store,the same can be supplied to the contractor at prevailing stock issue rate of grade S 240 and S 415 confirming to IS 432 and IS 1786 respectively with approved design etc complete as per Specification and direction of Engineer-In - charge.

Fixing vetrified tiles in floors,treads or steps and landing on 25 mm thick bed of c.m. 1:1 jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing completeas per direction of EIC.

Providing fitting fixing wooden panelling to walls, whereever necessary panelling will be done with 25mm and 9mm fire resistant and termite proof BWP ply confirming to I.S 5509 wherever required to be provided and finished with 1mm thick laminate of approved shade and colour as per the drawing. The rate inludes cost of cut-outs, fixation,other accessories, labour etc as per drawing and technical specification ad as per direction of Enginer-in-Charge.

Supplying, fitting fixing of 750mm high tsble msde out of 19mm thick BWR plywood finished with 4mm thick natural wood veneer of approved make and shade with melamine polish including cost of all materials labour etc complete as per direction of Engineer-in-Charge.

Providing fitting and fixing of false ceilling with Aluminum anodised T section No 3215 with 2'-0" center to centre, L section No 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2'-0" x 2'-0" using 6mm thick plain AC sheet board of size 2'x2'suspended from ceilling etc complete as directed by the Engineer-in-charge

Finishing wall surfaces with Acrylic wall putty Water based of approved make and finished smooth and even surfaces to receive painting including cost of all materials taxes, labour etc. complete as per direction of the Engineer-in-charge.

Wall painting 2-coats with plastic emulsion paint of approved shade on new work 1coats to give an even shade including cost and conveyance of all materials to site, and all labour charges etc. complete as per specification and direction of the Engineer-In-charge.

Removing Old tarfelt from roof slab ,cleaning the surface,lowering and removing the debris within 50 m lead. as per specification and direction of the Engineer-In-charge. .

Providing and laying water proofs with polymeric bituminous membrane (Plastic felt) of 2.25kg/sqm and 1.5mm thick ness consisting of layers having centre core of 20 micron thermoplastic high molecular high density polyethylene HMHDPE etc.complete as per direction of the Engineer-in-charge.

Providing, Fitting and Fixing M.S. Iron angle and shutters for doors and windows Including cost and conveyance of all materials to site, and all labour charges etc. complete as per specification and direction of the Engineer-In-charge.

Painting two coats over wood and iron work with approved Enamel paint over a coat of primming, including cost and conveyance of all materials to site, and all labour charges etc. complete as per specification and direction of the Engineer-In-charge.