8820/E8 PROVISION OF HARD STANDING WITH COVERED PARKING SHED NEAR MAIN GATE AT DEPOT AREA AT NAD SUNABEDA ODISHA UNDER GE (P) NAVY VISAKHAPATNAM

Amount

B/R PORTION

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in hard/dense soil.

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete. complete, all as specified & directed.

M&L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate in foundations, filling and mass concrete. complete, all as specified & directed.

S&F Mild steel work as in posts and struts screwed or welded to shape as directed including all necessary drilling, bolting or riveting etc and similar work conforming to Gde E-165 (Fe 290) complete all as specified and directed.

S&F Mild steel framed work in tubular trusses and tubular posts using ERW or induction butt welded tubes conforming to I.S 1161-1979 Grade St-240 including necessary welding, bolting, special shaped washer, clamps, cleats etc. with and including one shop coat of zinc chromate primer paint complete all as specified & as directed.

S&F Mild steel rolled sections conforming to Fe 410-W (Gde E-250) quality-B as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails fixed with angle cleats or other connecting plates etc. complete all as specified and directed.

S&F rolled mild steel work as in Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment including necessary welding etc. conforming to Fe 410-W (Gde E-250) quality-B complete all as specified and as directed.

S & F 0.50 mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheet "colour" having tensile strength of 550Mpa as in roof covering/cladding to wall etc fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

M&L for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick, any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall etc fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

M & L for Preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint (Ist quality) over a coat of red oxide primer complete all as specified and as directed by Engineer-in-charge.

Excavation over areas, exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc., and getting out in hard/ dense soil, complete all as specified.

Removing excavated soil/material exc. 1.5Km but not exc. 5Km and depositing where directed complete all as specified.

M&L for Hard core of gauge not exceeding 63mm using broken granite stone agg, deposited, spread and leveled in layers not exceeding 15cm thick, watered and well rammed, complete all as specified.

M&L for 75 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even complete all as specified and as directed.

M&L for cement concrete (Quality Controlled Concrete) work in pavement / hardstanding of flexural strength 40 Kg per square centimetre in field using 400 Kg of cement per cubic metre, thickness of concrete 25 cm or less, including necessary form work for laying in bays between joints & contraction, expansion joints/or between the two contraction joints, complete, all as specified & directed.

M&L Forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed sealed with sealing compound grade `A', in 100mm thick concrete slab complete all as specified and directed.

E/M PORTION (INTERNAL WIRING)

M & L for point wiring complete with 1100 Volt grade, 1.5 Sq.mm single core PVC insulated unsheathed cable, copper conductor multistranded, ISI marked passing through and including heavy duty PVC conduit, 20mm dia with all accessories with MS Box duly painted with 2 coats of synthetic enamel paint over a coat of primer with 3mm thick hylam sheet top cover duly earthed with 1.5 Sqmm, PVC insulated unsheathed cable, copper conductor, multistranded for one light point / fan point/Exhaust fan point/ bell point/ Bldg Security light point controlled by one switch complete all as specified and as directed.

All as per Item No.2.01 above but for 3 pin, 5/6 Amps switch socket on same board.

All as per Item No.2.01 above but for 3 pin, 5/6 Amps switch socket on independent board.

Supply and fixing switch socket combination 2 pin & 3 pin 5Amp, 240 volt, white, multipurpose, complete all as specified.

Supply and fixing switch paino, flush type, single pole, one way, 5/6 Amp, white, complete all as specified.

Supply and fixing, ceiling rose, surface Bakelite 65 x 30mm, three terminals, white, complete all as specified.

S & F MCB DB, SPN, 4 way 240 Volts, 50 Hz, single phase, AC supply including 200 Amps rated bus bar with sheet metal enclosure with and including MCB SPN 32 Amps - 01 No & MCB SP 6 to 32 Amps - 02 Nos complete all as specified.

Supply & fixing T8 LED tube light fitting 1x20W with and including T8 LED tube 20W, 6000K, surface / wall mounted type, CRCA body, powder coated white regal batten type with all accessories, including pre - wired twin core PVC insulated flexible copper conductor cable for connection, complete all as specified. Make : Cat No. SLE BTN T8 20W of Surya or Equivalent in Bajaj / Philips /CG / Havells

E/M PORTION (EXTERNAL ELECTRIFICATION)

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth for taking out/laying cable and getting out, in Hard / Dense Soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm, in soil, complete all as specified.

Removing excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified.

M&L for Natural river sand as cushioning of cable, including spreading and punning down all as per clause No. 3.21 of SSR Part-I complete all as specified. Note - Punned thickness shall be measured for payment purpose.

M&L for Reinforced precast cement concrete cable cover of class LV, type 1, flat, of size 250mm x 150mm x 40mm, as protection cover on cable, laid dry and flat adjacent to each other, complete all as specified.

Supply and laying of XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cable 16Sqmm x 3.0core, heavy duty, with aluminium conductor, 1100 Volt grade, laid in treanchs/ ducts/ along wall / under road etc., including taking down or out existing unserviceable cable, complete all as directed.

Cutting existing road for laying of GI pipe and filling with PCC Type B2 1:2:4 (40 mm graded aggregate) in surfaces all as specified and directed. Note:- Pipe shall be measured and paid seperately

M&L for 40mm dia light grade GI pipe with all fittings, laid in road cutting for cable protection, complete all as specified.

M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galavanised iron strip 32x6mm as lead (upto 7.5 M in length from earth plate) by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3, connected to earthing test point all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber & RCC 1:2:4 type B1 cover 40mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 20 mm dia GI light grade pipe for earth lead protection, 20mm dia GI light grade pipe for watering, water funnel, testing point etc., complete all as specified and testing on completion.

SMART ENERGY SOLUTIONS

M/S SANTOSH SATAPATHY

M/s Jai Sree Hari

Mahalaxmi Traders