REPAIR REPLACEMENT OF PIPELINES OVERHEAD TANKS WATER TANKS PLATFORMS ROOF TREATMENT AND STAGINGS ETC AT OFFICERS ACCOMMODATION GUEST ROOMS AND CERTAIN OTM BLDG AT INA EZHIMALA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Material and labour Glazed ceramic coloured tiles 350x250x7mm /300x600x7mm thick in vertical surfaces of stone/brick wall, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick backing coat plaster in CM 1:4 all as specified and as directed.

Material and labour coloured non-skid ceramic tiles (square/rectangular) 7 to 8mm thick in floors, area of each tile exc.0.11 sqm but n.exc 0.18 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with matching pigment over and including 15mm thick screed bed in CM (1:6) all as specified and as directed.

Material and labour 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub bases,sub floors etc. all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar, all as specified and as directed.

Material and labour 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding of exposed edges all as specified and as directed.

Demolition of Plain Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition & removal of old existing block/ laterite/Stone masonry of built in cement mortar of any description, all as specified and as directed.

Material and labour for Plain Cement Concrete (1:4:8) Type D-2 using 40mm graded crushed aggregate as in mass conc and filling of foundation all as specified and as directed.

Material and labour for pre-cast cement concrete block masonry (1:3:6) Type C1 using 20 mm aggregate with solid blocks, exc. 10 cm in width and setting in cement mortar (1:6) all as specified and as directed.

Material and labour for Plain Cement Concrete (1:2:4)Type B-0 using 12.5 mm graded stone aggregate as in coping, bond stone etc. complete all as specified and as directed. Note: Unit rate quoted shall be deemed to be inclusive of use and waste of formwork.

Material and labour for rendering 15mm thick in CM (1:4) on any faces of brick work or concrete surfaces finished fair & even without using extra cement complete all as specified and as directed.

Dismantling wrought iron, mild steel of any description not otherwise provided for

Supply and fix rolled mild steel in compound girders and stanchions, lattic girders,posts, staging for water tanks and the like including caps, bases,splices etc. builtup from two or more beem or channel sections or angles with plates, including all lattice bars, stifeners,gusset plates,etc. conforming to FE-410 - W (grade E-250) quality 'A' all as specified and as directed.

Material and labour for M S Hand rails, grills ,Gates ,half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof, brackets for Valley gutters, including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or FE 310-0

Material and labour for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Taking up or down steel tubing and connectors 15 mm bore in new or old position (wall, ceiling, floor etc.)

Taking up or down steel tubing and connectors 20 mm bore in new or old position (wall, ceiling, floor etc.)

Taking up or down steel tubing and connectors 25 mm to 32 mm bore in new or old position (wall, ceiling, floor etc.)

Supply and fix 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors etc all as complete all as specified and as directed.

Supply and fix in repair 20mm bore stop valves cast copper alloy, fancy type screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes (concealed type) all as specified and as directed.

Supply and fix 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors etc all as complete all as specified and as directed.

Supply and fix in repair 25mm bore stop valves cast copper alloy, fancy type screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes (concealed type) all as specified and as directed.

Supply and fix 32mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors etc all as complete all as specified and as directed.

Supply and fix 32 mm dia tank adaptor for CPVC pipes for fixing of plumbing fittings, complete all as specified and as directed.

Supply and fix 110 mm dia, PVC (SWR) rain water pipes, single socketed, in any length with sealant rubber ring joints including necessary MS flat Iron clamps of size (40 x 4mm) including removal of old existing pipes complete all as specified and as directed by the Engineer - in - Charge.

Supply and fix 75 mm dia, PVC (SWR) rain water pipes, single socketed, in any length with sealant rubber ring joints including necessary MS flat Iron clamps of size (40 x 4mm) including removal of old existing pipes complete all as specified and as directed by the Engineer - in - Charge.

Supply and fix PVC (SWR) bends 75mm dia, complete all as specified and as directed.

Supply and fix PVC (SWR) bends 110mm dia, complete all as specified and as directed.

Supply and fix in repairs 75mm PVC (SWR) floor trap, plain with grating including joint with solvent cement, complete all as specified and as directed.

Supply and fix in repairs finish stainless steel kitchen sink bowl type of any size complete all as specified and as directed.

Supply and fix in repair plastic water closet seat cover white colour closed pattern with flat bottom and cover and MSCP or aluminised hinging device, complete all as specified and as directed.

Supply and fix in repair PVC valve less syphonic action type flushing cistern low level with inlet ball valve float and handle including brackets 10 ltrs capacity, complete all as specified and as directed.

Supply and fix in repair 15mm bore chromium plated bib taps (fancy type), long body cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed for iron pipes, complete all as specified and as directed.

Supply and fix in repair 15mm dia bore pillar taps, cast copper alloy, fancy type capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and as directed.

Supply and fix in repair fancy type angular stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, chromium plated, fancy type, screwed both ends for iron pipe or for union and fixed, suitable for 15 mm bore pipe, complete all as specified and as directed.

Supply and fix in repair chromium plated health faucets (hand held shower type) with shut off valve (thumb or push button type) to allow controlled and continuous flow of water with adequate length and wall mounted pedestal for hanging the faucet etc including necessary 900 mm connection pipes, complete all as specified and as directed.

Supply and fix in repair PVCconnections 15mm dia & 450mm length with PTMT nuts for urinals WHB, flush tanks etc all as specified and as directed.

Supply and fix in repair cast copper alloy, brass chromium plated towel rail, 600mm long complete all as specified and as directed.

Supply and fix in repair 125mm size brass chromium plated shower rose complete all as specified and as directed.

Supply and fix in repair waste coupling, brass, chromium plated with long shank, half thread, 32mm dia, for WHB/urinal etc.complete all as specified and as directed.

Supply and fix in repair single lever tall body wash basin basin mixer tap complete all as specified and as directed. Make:Jaquar Cat No:KUP 35005BPM or equivalent in Hindware/Kohler.

Supply and fix in repair wall mixer complete all as specified and as directed. Make:Jaquar Cat No:FLR CHR 5281N or equivalent in Hindware/Kohler.

Supply and fix in repair aquamax concealed body of single lever shower mixer with 3 way divertor complete all as specified and as directed. Make:Jaquar Cat No : ALD-783 or equivalent in Hindware/Kohler.

Supply and fix in repairs multi-purpose corner shelf of size 300x 300mm, clear colour with stainless steel wall brackets and two grill bars,approved quality complete all as specified and as directed

Supply and fix in repairs Rimless cascade type water closet complete all as specified and as directed. Make:Jaquar Cat No:853S220SPPSM or equivalent.

Supply and fix in repairs Counter top Wash hand basin complete all as specified and as directed. Make:Jaquar Cat No:JDS-WHT-2590N or equivalent in Hindware/Kohler.

Supply and fix in repairs Bib cock complete all as specified and as directed. Make:Jaquar Cat No : KUP CHR 35037PM or equivalent in Hindware/Kohler.

Supply and fix in repairs Hand shower complete all as specified and as directed. Make:Jaquar Cat No : HSH CHR 1655 or equivalent in Hindware/Kohler.

Supply and fix in repairs shower arm 60cm complete all as specified and as directed. Make:Jaquar Cat No :SHA CHR 455L600 or equivalent in Hindware/Kohler.

Supply and fix in repairs SS overhead shower square 240x240mm complete all as specified and as directed. Make:Jaquar Cat No :OHS CHR 1629 or equivalent in Hindware/Kohler.

Supply and fix in repairs reversible shaving mirror complete all as specified and as directed. Make:Jaquar Cat No :ACN CHR 1193N or equivalent in Hindware/Kohler.

Supply and fix in repairs towel rack complete all as specified and as directed. Make:Jaquar Cat No : ACN CHR 1181FHS or equivalent in Hindware/Kohler.

Supply and fix in repairs towel rail complete all as specified and as directed. Make:Jaquar Cat No : CAN CHR 35711PS or equivalent in Hindware/Kohler.

Supply and fixin repairs towel ring complete all as specified and as directed. Make:Jaquar Cat No : AKP35721P or equivalent in Hindware/Kohler.

Supply and fix in repairs toilet paper holder complete all as specified and as directed. Make: Jaquar Cat No : AKP CHR 35753PS or equivalent in Hindware/Kohler.

Supply and fix in repairs rotational moulded PVC water storage tanks double layered 250 ltr capacity (any shape with closed top) hoisted and fixed in any position all as specified including taking down old broken/cracked water tank and connecting the water pipe line in position.

Supply and fix in repairs rotational moulded PVC water storage tanks double layered 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified including taking down old broken/cracked water tank and connecting the water pipe line in position.

Supply and fix in repairs rotational moulded PVC water storage tanks double layered 750 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified including taking down old broken/cracked water tank and connecting the water pipe line in position.

Cleaning of water tank exc 250 & n.exc 500 lit, including cleaning all scales and dirts from inside of tank using bleaching powder and washed with water, complete all as specified including taking down and re-fixing of float valve. Including mentioning date of cleaning on water tank using white synthetic enamel paint as existing complete all as specified and as directed. Note :- After Cleaning of water tank, The rep of contractor should check during water supply time and ensure water is reaching to the qtr and float valve is working properly and no leakages are there at joints.

All as per item No 61.00 here-in-before but exc 500 & n. exc 1000 lit, complete all as specified and as directed.

Supply and fix in repairs Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 32 mm dia pipes

Dismantling single layer of Mangalore pattern tiles in roofing, ceiling, ridge and hip complete all as specified and as directed by Engineer in charge.

Material and labour for fixing roof tiles mangalore pattern interlocking tiles (Class AA) of any size laid dry complete all specified and as directed.

Re-fixing roof tiles mangalore pattern interlocking tiles complete all specified and as directed.

Material and labour for Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar (1:6) complete all specified and as directed.

Re-fixing Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar (1:6) complete all specified and as directed.

Demolition of plain cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and labour for Plain Cement Concrete (1:2:4) Type B0 using 12.5 mm graded stone aggregate as in coping, roof kerbs, beeds for roofing tiles etc complete all as specified and as directed.

Material and labour for preparation of new MP roof tiles and applying two coats of Unigloss antifungal tile guard paint over a coat of primer of approved colour complete all as per manufacturer's instructions and as specified.

Material and labour for complete removal of existing surface of MP roof tiles and applying two coats of Unigloss antifungal tile guard paint over a coat of primer of approved colour complete all as per manufacturer's instructions and as specified.

Gates Infra Construction Co (BID ID -3495758)