Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.7 LAdmitted-Finance | ₹4.7 L | L1 | Admitted-Finance |
| 2 | L2₹4.9 L+₹18,120 (3.84%)Admitted-Finance | ₹4.9 L+₹18,120 (3.84%) | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/s Rehmat Bore Wells L1 | M/S NOOR DRILLING AND BORE WELLS L2 |
|---|---|---|---|---|---|
| 1.00 | Drilling of 125 mm diameter tube well by air rotary drilling rig unit suitable for lowering of MS casing of 125mm diameter in suitably drilled bore hole as per specifications laid down in IS 2800 (Part-I-II) with up to date amendments. The job is to be done in all kinds of soils, boulder, rocks, collapsible strata, saturated soils, artisan conditions (ODEX/DTH) attachments and exploration of ground water by tapping sufficient aquifer zones. The job includes the cost shifting of drilling accessories, tools, bits, casing shoe,consumables like fuel, lubricants, skilled and unskilled labours and other unforeseen items. Development of tube well with backwash method with air compressor of mininum capacity 1000 CFM (300 PSI air delivery system) with suitable arrangements till well is thoroughly developed in all respect as per directions of site engineer. | 90 | Mtr | 2,500 ₹2,25,000 Lowest | 2,600 ₹2,34,000 |
| 2.00 | P/F of MS (Class B) 125mm dia pipe and subsequent lowering ofcasing assembly and its welding after every 10 feet, up to the drilled/desired depth. The casing is to be slotted as per the site requirement following allotment and as per the directions of site engincer. The specifications of the tube well shall be as under: as per IS 4270 : 2001. | 90 | Mtr | 2,150 ₹1,93,500 Lowest | 2,200 ₹1,98,000 |
| 3.00 | Supply, Installation, Testing and commissioning of INDIA Mark II hand pump assembly comprising of cylinder, head, handle, assembly, front cover, handle, axle, washers, nuts/ bolts. | 1 | No. | 11,600 ₹11,600 Lowest | 12,200 ₹12,200 |
| 4.00 | Providing/fitting of risers 32 mm dia (GI pipe type-B) including sockets etc. (each riser of 3 mtr). | 17 | Nos. | 1,750 ₹29,750 Lowest | 1,850 ₹31,450 |
| 5.00 | Providing/fitting of connecting rods G.I for INDIA mark II hand pump.
(Each connecting rod of 3 m). | 17 | Nos. | 390 ₹6,630 Lowest | 450 ₹7,650 |
| 6.00 | Providing/laying of plain Cement Concrete block of size 4ft x 4ft x 1ft in 1:3:6 mix to give adequate strength to act as a sanitary-block for the well and to grout the hand pump assembly in order to make it robust to resist shock load observed while pumping. The Job includes Providing/laying of PCC edges of 4" x 4" in 1:3:6 mix and Providing/laying of cement plaster in 1:4 mix to the above block to give aesthetically good appearance. Cost on account of stuttering, strutting, centering, curing etc. is included in the scope ofwork. In case the suitable space for the above specification is not available the surface area is to be adjusted accordingly. | 1 | Job | 5,700 ₹5,700 Lowest | 7,000 ₹7,000 |
Tender Value
₹4.7 L
EMD Value
₹14,200
Closing Date
12 Sept 2025, 11:00 amClosed
Ex. Engineer JSD PHE GWD Srinagar
Ex. Engineer JSD PHE GWD Srinagar, Bagi Ali Ali Marardan Khan Nowshera Srinagar
Construction of Bore Well/ Tube Wells at Sonach Deethu (Block Chittergul) Panchayat Halqa Deethu-B.
2025_PHE_286326_80
e-NIT No 40 of 2025-26
Open Tender
Drilling Works
Item Rate
10 days
Block Chittergul) Panchayat Halqa Deethu-B.
Please refer Tender documents.
2 documents required · 2 mandatory
₹300
Yes
Ex. Engineer JSD PHE GWD Srinagar
₹14,200
Yes
18 Sept 2025
2 Sept 2025
13 Sept 2025
2 Sept 2025
12 Sept 2025
2 Sept 2025
Amount
Drilling of 125 mm diameter tube well by air rotary drilling rig unit suitable for lowering of MS casing of 125mm diameter in suitably drilled bore hole as per specifications laid down in IS 2800 (Part-I-II) with up to date amendments. The job is to be done in all kinds of soils, boulder, rocks, collapsible strata, saturated soils, artisan conditions (ODEX/DTH) attachments and exploration of ground water by tapping sufficient aquifer zones. The job includes the cost shifting of drilling accessories, tools, bits, casing shoe,consumables like fuel, lubricants, skilled and unskilled labours and other unforeseen items. Development of tube well with backwash method with air compressor of mininum capacity 1000 CFM (300 PSI air delivery system) with suitable arrangements till well is thoroughly developed in all respect as per directions of site engineer.
P/F of MS (Class B) 125mm dia pipe and subsequent lowering ofcasing assembly and its welding after every 10 feet, up to the drilled/desired depth. The casing is to be slotted as per the site requirement following allotment and as per the directions of site engincer. The specifications of the tube well shall be as under: as per IS 4270 : 2001.
Supply, Installation, Testing and commissioning of INDIA Mark II hand pump assembly comprising of cylinder, head, handle, assembly, front cover, handle, axle, washers, nuts/ bolts.
Providing/fitting of risers 32 mm dia (GI pipe type-B) including sockets etc. (each riser of 3 mtr).
Providing/fitting of connecting rods G.I for INDIA mark II hand pump. (Each connecting rod of 3 m).
Providing/laying of plain Cement Concrete block of size 4ft x 4ft x 1ft in 1:3:6 mix to give adequate strength to act as a sanitary-block for the well and to grout the hand pump assembly in order to make it robust to resist shock load observed while pumping. The Job includes Providing/laying of PCC edges of 4" x 4" in 1:3:6 mix and Providing/laying of cement plaster in 1:4 mix to the above block to give aesthetically good appearance. Cost on account of stuttering, strutting, centering, curing etc. is included in the scope ofwork. In case the suitable space for the above specification is not available the surface area is to be adjusted accordingly.
M/S NOOR DRILLING AND BORE WELLS (BID ID -2496878)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .