REPAIR TO WALL FENCING, GATE, DRAIN AND OTHER MISC B/R

Amount

Demolition of cement concrete (unreinforced) in ground floor and pavings n. exc. 15cm thick (below or above ground level). Complete all as specified and directed by Engineer-In-Charge.

Demolition of brickwork or stone/boulder masonry, built in cement mortar, including ashlar facing, dressed stonework and precast concrete articals, Complete all as specified and directed by Engineer-In-Charge.

Demolition of cement concrete (reinforced) in slabs, Beams, lintels etc in cement mortar or cement concrete ( reinforcemet cut as required to facilitate demolition). Complete all as specified and directed by Engineer-In-Charge.

M&L for walling of random rouble, uncoursed, well bonded, bedded, and solid hearted, built in cement mortar 1:4. Complete all as specified and directed by Engineer-In-Charge.

All as per sr item No. 04 above but except stone.

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius in cement mortar (1:4) as in drain/boundary wall, using old size bricks, Complete all as specified and directed by Engineer-In-Charge.

All as per Sr item No. 6 above but except bricks. Note:- Serviceable bricks retrieved from Serial item No. 2 above shall be used after cleaning, Complete all as specified and directed by Engineer-In-Charge.

M&L for plain cement concrete (1:3:6), type C-2, using 40 mm graded mechanically crushed stone aggregates as in foundation filling and mass concrete & other similar works. Complete all as specified and directed by Engineer-In-Charge.

M&L for cement concrete type B2, 1:2:4 (40mm graded aggrgate) in surface channel and drains. Complete all as specified and directed by Engineer-In-Charge.

M&L for providing cement concrete type B1, 1:2:4 (20mm graded aggregate) as in coping, drain bed etc. Complete all as specified and directed by Engineer-In-Charge.

Extra over stone walling for hammer dressing to face stones and bracing of face beds and joints,as specified of random rubble walling ,uncoarsed or brought upto coarses with maximum depressions on face from straight edge held against the dressed surface n exc 20mm on granite or trap stone.

Extra over forming fair finished drain or channel 40cm inner girth in cement concrete, using extra cement including forms, moulds,mitred/stopped ends etc.Complete all as specified and directed by Engineer-In-Charge.

M&L for rendering 15 mm thick in CM 1:4 on stone masonry surfaces finished even and smooth without using extra cement, Complete all as specified and directed by Engineer-In-Charge.

M&L for rendering/plastering, 15mm thick in cement mortar (1:4) on fair face of brick walls or concrete surfaces,surfaces finished even and smooth without using extra cement. Complete all as specified and directed by Engineer-In-Charge.

M&L for providing cement concrete type B1, 1:2:4 (20mm graded aggregate) in cover slab for drain etc. Complete all as specified and directed by Engineer-In-Charge.

M&L for mild steel TMT bar, 10mm dia and over, cut to length, bent to shape required, including cranking, bending and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, Complete all as specified and directed by Engineer-In-Charge.

M&L for mild steel TMT bar, 6mm to 8mm dia cut to length, bent to shape required, including cranking, bending and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, Complete all as specified and directed by Engineer-In-Charge.

M&L for mild steel TMT bar, 5mm dia and over upto & including 10mm dia in stirrups, cut to length, bent to shape required, including cranking, bending and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs 110mm bore PVC (SWR) soil, waste and vent pipes single socketed. Complete all as specified and directed by Engineer-In-Charge.

M&L for boulder filling dry, hand packed tightly as in vertical bunds with sloping faces. Complete all as specified and directed by Engineer-In-Charge.

Dismantling structural steel work including door, gates but excluding framed truss etc. Complete all as specified and directed by Engineer-In-Charge.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground post embedded in concrete, brick work, masonary. Complete all as specified and directed by Engineer-In-Charge.

Excavation in post holes (or similar holes) each not exceeding 0.5cum, and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good surface in soft/ loose soil, Complete all as specified and directed by Engineer-In-Charge. Note : Excavated portion left unfilled, with PCC shall be made good as above.

Supply and fixing mild steel rolled sections such as angle etc. in posts and struts as in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wiremesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165, Complete all as specified and directed by Engineer-In-Charge.

S & F plates ( plain or chequered) channels,square cut or notched, forming holes, with riveted Bolted or welded attachment FE 410-W Gde -E-250 quality A. Complete all as specified and directed by Engineer-In-Charge.

Supply and fixing mild steel screw bolts (machine made) 5mm to 10mm dia and exceeding 5cm long but not exceeding 10cm long, with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, Complete all as specified and directed by Engineer-In-Charge.

Supply only galvanized mild steel chain link fencing of weight not exc 4 kg per Sqm to mild steel angle iron posts any size or any type. Complete all as specified and directed by Engineer-In-Charge.

Fixing only in repairs galvanized mild steel chain link fencing of weight not exc 4 kg per Sqm to mild steel angle iron posts. Complete all as specified and directed by Engineer-In-Charge.

Supply and fixing in position, Mild steel TMT bars 10mm dia and over, cut to length required, and binding with and including mild steel wire (annealed) not less than 2.0mm dia or securing with clips, as to strengthen chain link fencing, complete all as specified and directed.

S&F in repairs galvanized two strand steel barbed wire 2.24mm dia barbed with 2.00mm dia barbs at 75mm spacing and straining and fixing to any type of standard rail straining bolts incl. securing or tying at crossing with and provision of galvanized mild steel wire staples or steel pin etc. Complete all as specified and directed by Engineer-In-Charge. (Note: Each line of wire to be measured)

Restraining and resecuring of galvanised, steel barbed wire any type including making good staples etc. Complete all as specified and directed by Engineer-In-Charge.

Supply, laying and fixed in repairs of galvanized punched tape concertina coil (coil dia 1050mm at closed position) complete having galvanised spring steel core wire 2.50mm dia cold drawn steel galvanised punched tape of low carbon steel having series of sharp barbs uniformily punched along its length 550 Nos of barbs on pheriphery per revelution, crimped on steel spring core wire galvanised clips, GI steel wire handles hooked to coil for handling MS square bars spike hooked with coil having pointed face for anchorage closed of weight 11kg each coil including spreading of each coil min 10mtr length adequately tied to GI barbared wire fencing with GI wire of not less than 16 gauge at every 1000mm spacing tying of handles of succeding coil with preceding coil with GI wire not less than 16 Gauge, laying over 'Y' neck of angle iron posts. Complete all as specified and directed by Engr-In-Charge.

S&F rolled mild steel of grade Fe-290 (Grade E-165) in framed work as in doors or gates of angle or other section with gusset plates, rails braces, etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete. Complete all as specified and directed by Engr-In-Charge.

S&F in repairs MS plain black sheet 1.6mm thick in steel gates and similar work including necessary welding. Complete all as specified and directed by Engr-In-Charge.

M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth, applying one coat of synthetic enamel paint, Complete all as specified and directed by Engr-In-Charge.

M&L for preparation of new steel surfaces of any description, not otherwise described, over 10cm width or girth, applying two coats of synthetic enamel paint over red oxide primer, Complete all as specified and directed by Engr-In-Charge.

M&L for preparation of new steel surfaces of any description, not otherwise described, n.exc 10cm width or girth, applying two coats of synthetic enamel paint over red oxide primer, Complete all as specified and directed by Engr-In-Charge.

M&L for preparation of new plastered or un plastered wall surfaces of any description and applying two coats of cement base paint over one coat of alkali resistant primer. Complete all as specified and directed by Engr-In-Charge.

M&L for 18-20mm thick granite (of any type) work (table rubbed and polished), in gate pillars, window cills, steps, cooking plateform, shelves, counter slabs and the like, set in neat cement slurry @ 3Kg/Sqm, laid over and including 15mm thick rendering in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, Complete all as specified and directed by Engr-In-Charge.

M/S ABDUL MAJID LONE

M/S DALJIT SINGH TULLA

M/S MUKHTAR CONSTRUCTION CO