Loading…
Loading…
Tender Value
₹1.5 Cr
EMD Value
₹1.6 L
Closing Date
1 Jul 2026, 6:00 pm6d left
Similar tender results from the same govt authority in the past 3 years.
EXECUTIVE ENGINEER
Special Repair to Cat B-48 (G+3) (Block No. 7, 8 & 9), C-03 (G+2), D-02 (G+1) & E-03 Units, City Police Station & Dy. Sp. Office in Veraval City, B-32 (G+3), C-02 & D-01 Units in Prabhas Patan Police Line & B-32 (G+3) Units at Sutrapada, Dist. Gir Somnath. [Including Electrification Work]
314365
02 [2026-2027]
Open
Civil - All
Junagadh
9 documents required · 7 mandatory · 2 optional
₹3,600
GUJARAT STATE POLICE HOU.CORPORATION LTD.
₹1.6 L
15 Jun 2026
15 Jun 2026
15 Jun 2026
1 Jul 2026
15 Jun 2026
Name of Work : Special Repair to Cat B-48 (G+3) (Block No. 7, 8 & 9), C-03 (G+2), D-02
(G+1) & E-03 Units, City Police Station & Dy. Sp. Office in Veraval City,
B-32 (G+3), C-02 & D-01 Units in Prabhas Patan Police Line & B-32
(G+3) Units at Sutrapada, Dist. Gir Somnath. [Including Electrification
:: SCHEDULE B ::
Statement showing the approximate quantities for the items of the above work to be carried out and
approximate cost put to tender for Rs.
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
1 Removing & Scraping of old deteriorated plaster of any 3102.00 Sqm 20.63 Rupees Twenty And
thickness from wall/R.C.C. member including stacking Paise Sixty Three Only
of serviceable material and disposal of unserviceable
from site of work with all.
2 Dismantling tile or stone floors laid in mortar including 546.00 Sqm 50.94 Rupees Fifty And Paise
stacking of serviceable materials and disposal of Ninety Four Only
unserviceable materials with all lead and lift.
3 Demolition and disposal of unserviceable materials with 23.00 Cum 646.23 Rupees Six Hundred Forty
all lead and lift.(ii) Cement concrete. Six And Paise Twenty
4 Demolition and disposal of unserviceable materials with 15.00 Cum 1122.66 Rupees One Thousand
all lead and lift.(i) Reinforcement Cement concrete. One Hundred Twenty Two
And Paise Sixty Six Only
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
5 Dismantling sanitary fittings like wash basin,w/c pan 78.00 No. 429.66 Rupees Four Hundred
indian and European type, flusing tank etc including Twenty Nine And Paise
stacking of serviceable materials with all lead and lift. Sixty Six Only
6 Dismantling of PVC/U PVC Pipe for any dia... with all 682.00 Rmt 20.00 Rupees Twenty Only
7 Dismantling of C-pvc Pipe for any dia... with all lead and 672.00 Rmt 20.00 Rupees Twenty Only
8 Credit value for U-PVC/ PVC pipes Rate are inclusive of 680.00 Rmt -6.00 Rupees Only -4080.00
dismentalling of PVC Pipes
9 Credit value for C-pvc pipes Rate are inclusive of 672.00 Rmt -8.00 Rupees Only -5376.00
dismentalling of C-pvc Pipes
10 Cleaning the Sluge of Old Septic Tank Size 5.00 x 2.15 15.00 No. 12000.00 Rupees Twelve Thousand
11 Providing and laying Corrosion resistance Steel 193.00 Kg. 83.92 Rupees Eighty Three And
reinforcement (Grade Fe-500) for RCC work including Paise Ninety Two Only
cutting, bending, binding and placing in position
etc.comp for all floor
12 Providing and applying bonding agent for grip between 175.00 Sqm 371.39 Rupees Three Hundred
old & new concrete by Sikadur 32 or its equivalent as Seventy One And Paise
approved by engineer in charge. Rates are inclusive of Thirty Nine Only
surface preparation such as cleaning surfaces. Mixing
components of Sikadur 32 together with a slow-speed
electric drill with properly designed impeller until a
smooth consistency is achieved. Mix shall be applied by
brush, roller or spray.
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
13 Providing and applying Micro concrete in existing RCC 7.25 Cum 62188.93 Rupees Sixty Two
members. micro concrete shall be of Perma recrete - Thousand One Hundred
306 or its equivalent from ROFF, FOSROCK, BASF or Eighty Eight And Paise
SIKKA as approved by engineer in charge (Of 60 MPA Ninety Three Only
at 28 days). Rates are inclusive of cleaning the surface,
remove loose materials, applying Sikka Rust off 100 or
its euivalent to existing reinforcement. Preparing
microconcrete as per instruction of manufacturer
required form work and scaffolding and filling
microconcrete in required places etc complete.
14 Major Reparing of Door, Windows shutters and frame 755.00 Sqm 321.78 Rupees Three Hundred
including refixing aligning shutters providing replacing Twenty One And Paise
and fixing alluminium anodized fitting and fixtures etc. Seventy Eight Only
complete excluding the painting as per the specification
including cutting of panel or member of rails.
15 Providing and fixing 5mm thick frosted Glass etc. 13.00 Sqm 450.00 Rupees Four Hundred
Complete. Fifty Only
16 Providing & fixing Bajari glass ordinary quality bedded 14.00 Sqm 742.75 Rupees Seven Hundred
with putty with oil paint after Removing old putty and Forty Two And Paise
cleaning surface and necessary cutting of Bajari glass Seventy Five Only
(B) 4mm thick Bajri glass
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
17 Providing, Supplying and Fixing of 32mm (Total) Thick 22.50 Sqm 8411.60 Rupees Eight Thousand
Double Flush Door Shutter with 1mm Thick Laminates Four Hundred Eleven And
on Both Side of Shutter. Making / Construction of Flush Paise Sixty Only
Door is with Pine or southern Yellow Pine Filler and
2.5mm core veneer Both Side and 0.4mm Face Veneer
on Both Side with Lock rail on Center. Flush Door
Provide with Teak wood beading patti (32mm X 12mm)
on Peripheries of Flush Door with Door Frame of Non
Teak Solid Wood of size 100mm x 60mm with
Chemically Treated and Seasoned Including Paint
Matching with Laminates. Frame & Flush door shutter
having 5 year warranty against attack of biological
agent like termite, borers, decay, fungi and harmful
insects also warranty against seasoning related issues
like crack, bending, twisting, warping. Laminates on
shutter shall be press by cold press method. Shutter
shall be brought to site in packed PVC bags & pvc
coating shall be removed on completion of work in such
a way that shutter & Frame is free from nail mark & any
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
Rates are also Inclusive of all Labors & Proviging 15cm.
Long 8 No of Hold Fast (25mm X 5mm) & 8 No of
Inch S.S. but Hinges, 100mm x 75 mm x 3mm thick,
required Screw & Nails per Frame and Fixing following
S.S. Fixtures And Fastening. (1) Aldrops 2 No, 250mm
x 16mm, (2) Door Stopper 2 No, 100mm Long, (3)
Double Leg Heavy Push Door Stopper 2 No & (4)
Handle 4 No, 150mm Long X 10mm thick. Door are
Fixing as per Details Drawing & Instruction of Engineer
in charge. All Materials Used Shall be as Per approved
Material Make List of G.S.P.H.C. The Required Frame
is to be Obtained from Vanil Udhyog Maked Only.
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
18 Providing and fixing Polyvinly cloride (PVC) Door frame 60.00 Sqm 1449.90 Rupees One Thousand
of size 50 x 47mm with a wall thickness of 5mm thick Four Hundred Forty Nine
made out of extuded 5mm rigid PVC foam sheet, mitre And Paise Ninety Only
cut at two corners and jointed with 2 Nos. of 150mm
long brackets of 15 x 15mm M.S. square tube. The two
vertical door profiles are to be reinforced with 19 x
19mm M.S.squre tube of 19 gauge, EPDM
rubbergasket weather seal to be provided through out
the rame. The door frame shall be fixed to the wall
using 65/100mm long M.S. scresws through the frame
by using PVC fasteners A minimum of 4 Nos. of screws
to be provided for horizontal member Providing and
fixing 30mm thick Solid Panel PVC Door Shutter
consisting of frame made out of M.S. tubes of 19 gauge
(16mm) thickness and size of 19mm x 19mm for stiles,
& 15mm x 15mm for top & bottom rails M.S. frame shall
have a coat of steel primers of approved make and
manufactures M.S. frame shall be covered with 5mm
thick heat moulded.
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
PVC 'C' channels of size 30 x 50mm forming stiles. and
5mm thick, 75mm wide PVC sheets for top rail. lock rail
& bottom rail on either siede, and 10mm (5mm x 2)
thick,20mm wide cross PVC sheet as gap insert for top
rail & bottom rail. Panelling of 5mm thick PVC sheet to
be fitted in the M.S. frame welded /sealed to the stiles &
rails with 30mm wide x 5mm thick PVC Sheets beading
on either side, and jointed together with solvent cement
adhesive etc. An additional 5mm thick PVC strip of
20mm width is to be struck on the interior side of the'C"
Channel using PVC solvent adhesive and stainless
steel (grade 316) fixtures & fastening 4 nos. of hinges
(100mm x 58mmx1.9mm)Two Nos. of Aldrop of
mm x 16 mm, Stopper 150 mm x 10 mm & Handle
mm long as per detail drawing etc. complete as
direction of Engineer-in-Charge.
19 Providing and fixing standard extruded of alluminium 9.00 Sqm 1163.92 Rupees One Thousand
section of size 63 x 38.10 x 1.20 mm ( Jindal section One Hundred Sixty Three
No. 2434, @Wt 0.643 Kg/ Rmt) with colour anodized And Paise Ninety Two
alluminium frame for ventilation with 5 mm thick frosted Only
glass as details etc complete for ventilation
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
20 Providing, Fabricating and fixing M.S. GRILL/GATE of 6590.00 Kg. 75.30 Rupees Seventy Five And
approved pattern fabricated from M.S. flat,square bars, Paise Thirty Only
round bars,c-channel, box pipe as per detail Drawings.
Rate is inclusive of welding with grinding smooth
surface, two coats of Oil paint and one coat of yellow
Zinc primer coat of approved brand only. Oil paint shall
be Luxol Enamel paint of Berger Paint india limited. or
asian paint apcolite premium gloss Enamel of asian
paint or Dulux premium gloss enamel of dulux paint and
nerolac synthetics enamel of nerolac paint for all floor
and at any height only. Structural Steel material should
be used ISI marked only.
21 Providing 10 mm thick cement PLASTER in single 158.00 Sqm 230.60 Rupees Two Hundred
coat on ceilings for interior plastering and finished even Thirty And Paise Sixty
& smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including Only
finishing with a floating coat of neat cement slurry at
22 Provinding 15 mm thick cement PLASTER in single 307.00 Sqm 230.95 Rupees Two Hundred
coat on brick or concrete wall for interior plastering and Thirty And Paise Ninety
finished even and smooth in C.M. 1:4 ( 1 cement : 4 Five Only
sand ) including finishing with floating coat of neat
cement slurry at Ground Floor.
23 Providing 10 mm thick cement PLASTER in single 140.00 Sqm 258.32 Rupees Two Hundred
coat on ceilings for interior plastering and finished even Fifty Eight And Paise
& smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including Thirty Two Only
finishing with a floating coat of neat cement slurry at
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
24 Provinding 15 mm thick cement PLASTER in single 357.00 Sqm 260.75 Rupees Two Hundred
coat on brick or concrete wall for interior plastering and Sixty And Paise Seventy
finished even and smooth in C.M. 1:4 ( 1 cement : 4 Five Only
sand ) including finishing with floating coat of neat
cement slurry at First Floor.
25 Providing 10 mm thick cement PLASTER in single 130.00 Sqm 286.04 Rupees Two Hundred
coat on ceilings for interior plastering and finished even Eighty Six And Paise Four
& smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including Only
finishing with a floating coat of neat cement slurry at
26 Provinding 15 mm thick cement PLASTER in single 346.00 Sqm 290.55 Rupees Two Hundred
coat on brick or concrete wall for interior plastering and Ninety And Paise Fifty
finished even and smooth in C.M. 1:4 ( 1 cement : 4 Five Only
sand ) including finishing with floating coat of neat
cement slurry at Second Floor.
27 Providing 10 mm thick cement PLASTER in single 122.00 Sqm 313.76 Rupees Three Hundred
coat on ceilings for interior plastering and finished even Thirteen And Paise
& smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including Seventy Six Only
finishing with a floating coat of neat cement slurry at
28 Provinding 15 mm thick cement PLASTER in single 362.00 Sqm 320.35 Rupees Three Hundred
coat on brick or concrete wall for interior plastering and Twenty And Paise Thirty
finished even and smooth in C.M. 1:4 ( 1 cement : 4 Five Only
sand ) including finishing with floating coat of neat
cement slurry at Third Floor.
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
29 Providing 10 mm thick cement PLASTER in single 32.00 Sqm 341.48 Rupees Three Hundred
coat on ceilings for interior plastering and finished even Forty One And Paise
& smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including Forty Eight Only
finishing with a floating coat of neat cement slurry at
30 Provinding 15 mm thick cement PLASTER in single 131.00 Sqm 350.15 Rupees Three Hundred
coat on brick or concrete wall for interior plastering and Fifty And Paise Fifteen
finished even and smooth in C.M. 1:4 ( 1 cement : 4 Only
sand ) including finishing with floating coat of neat
cement slurry at Fourth Floor.
31 Provinding 20 mm thick SAND FACED cement 2500.00 Sqm 355.17 Rupees Three Hundred
PLASTER on walls above ground level consisting 12 Fifty Five And Paise
mm thick backing coat of C.M. 1: 3 ( 1 cement : 3 sand ) Seventeen Only
and 8mm thock finishing coat of C.M. 1:1 ( 1 cement :
sand ) etc. Complete for any height.
32 Providing and fixing FRP/PVC sheet chajja including all 51.00 Sqm 669.44 Rupees Six Hundred Sixty
required fabrication job with fixing at site by means of Nine And Paise Forty Four
fasteners/civil works by chipping and remaking good Only
finish plastering etc complete. Job includs water
proofing treatment on the junction of wall and chajja
with providing required water proof sealant, cement vat
etc complete as per direction of site enginner.
(Scaffolding for this item will be paid under relevant item
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
33 Provinding 10 mm thick cement PLASTER in single 376.00 Sqm 256.09 Rupees Two Hundred
coat of interior plastering and finished even and smooth Fifty Six And Paise Nine
in cement mortar 1:3 ( 1 cement : 3 sand ) and finishing Only
with floating coat of neat cement slurry including
providing and mixing WATER PROFFING material in
C.M in proportion recomended by the manufacturer
including finishing with a flaoting coat of neat cement
slurry FOR ALL FLOOR.
34 Provinding CEMENT VATA (10cm x 10cm) size quarter 789.00 Rmt 24.04 Rupees Twenty Four And
round in cement mortar (1 : 1) including neat cement Paise Four Only
finishing, watering etc. Complete.
35 Providing and laying acrylic base ( zycosil) equvivalant 376.00 Sqm 110.70 Rupees One Hundred Ten
water proofing paint in two coats to vertical and And Paise Seventy Only
horizontal surface of depressed portion of bath and
W.C. as directed by engineer -in- charge. This
treatement shall be carried out over and above water
proofing cement plaster
36 Provinding and fixing PVC SWR Nahni Trap of the 68.00 No. 608.11 Rupees Six Hundred Eight
following nominal dia. Self cleaning design with top jali And Paise Eleven Only
and stainer including cost of cutting and making good
the walls and floors 100mm inlet and 50mm outlet.
Including 150mm x 150mm stainless steel jali.
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
37 Providing and fixing water closet squatting pan (Orissa 42.00 No. 1354.44 Rupees One Thousand
type W.C. pan) first quality with UPVC S trap of 100 Three Hundred Fifty Four
mm including jointing the trap with UPVC Pipe (size And Paise Forty Four Only
580mm X 450 mm in vitreous china white colour).Rate
also includes making holes in RCC slab / Beam and
fixing the trap in hanging position by M.S. clamps of
required size fitted in ceiling .
38 Provinding and Filling Cinder including watering, 31.00 Cum 791.69 Rupees Seven Hundred
consolidation etc. complete Ninety One And Paise
Sixty Nine Only
39 Providing & Laying ordinary Cement Concrete 1:2:4 31.00 Cum 3867.19 Rupees Three Thousand
including finishing smooth and curing complete, Eight Hundred Sixty
including cost of formwork but excluding cost of Seven And Paise
reinforcement. For all Floors. Nineteen Only
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
40 Providing & Laying integrated cement based proprietary 123.00 Sqm 905.04 Rupees Nine Hundred
water proofing treatment of required thickness over the Five And Paise Four Only
roof including 10mm thick water proofing cement plaster
in cement mortar 1:3 and CHINA MOSAIC fitting and
finally finishing the surface with white cement slurry and
slopping out terrace slab with following specification laid
to required slope not flatter than 1:80 (the thickness of
water proofing treatment near rain water outlet or the
lowest point of the finished slope shall not be less than
45mm including treating the vertical surface of the
parapet wall upto 20cms. height above finished level of
terracing including finishing top with joint less water
proofing plaster, curing, testing etc. completed. Rate is
including 10 years performance of guarantee bond to
be given on stamp paper (No extra shall be paid for
increase in thickness for proper slope). Applying and
grouting a slurry coat of neat cement using 2.75 kg/sqm
of cement admixed with proprietary water proofing
compound conforming to IS-2645 y full C.I., stator
winding- copper, rotor- copper, shaft- SS / carb
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
Laying cement concrete using broken bricks bats 25mm
to 40mm size with 50% of cement mortar 1:4 (1cement :
4 coarse sand) over 10mm thick water proofing cement
plaster in cement mortar of mix 1:3 (1cement : 3 coarse
sand) admixed with proprietary water proofing
compound confirming to IS-2645 to required slope and
treating similarly the adjoining walls upto 200mm height
including rounding of junction of walls. After two days of
proper curing applying a second coat of cement slurry.
Finishing the surface with china mosaic pieces laid in
10mm thick joint less cement mortar of mix 1:3
(1cement : 3 coarse sand) admixed with proprietary
water proofing compound confirming to IS-2645 and
finally finishing the surface with trowel with neat cement
slurry. The whole terrace so finished shall be flooded
with water for a minimum period of two weeks for curing
for final test. All above operation to be done in order
and as directed and specified by the engineer in
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
41 Providing and laying Damp Proof Suprema white on 522.00 Sqm 409.30 Rupees Four Hundred
Terrace Surfaces (Two Coats) over and above Applying Nine And Paise Thirty
one coat of primer to give in Required Cleaning of Only
Terrace and open old Vatta of China mosaic after
throughly brushing the surface to remove all dirt and
remains of loose powdered matrials etc. complete.
Primer and Damp proof shall be used as per approved
materials list of GSPHCL or Instruction as Engineer
Incharge. The whole terrace so finished shall be flooded
with water fora minimum period of two weeks for curing
for final taste. Rate are including Ten Years
performance of gayrantee bond to be given on Stamp
42 Providing & Fixing to Wall Ceilling and Floor 4.0Kg/cm2 208.00 Rmt 162.23 Rupees One Hundred
PVC Rain Water pipe as Per IS-4885 of 75mm Dia. Sixty Two And Paise
Complete with Special Flings, Compressor type Fittings Twenty Three Only
like G.I. Slotted Z patti of 16 Gauge (minimum1.60mm
thick) and minimum 6mm dia. U Clamp with Washer
Nut at every 1.50mt. vertical distance including All
Labour Charges etc. complete including making good
the Ceilings, Floors and on terrace. Rain water pipe
shall be 75 mm Dia. PVC horizontal pipe and vertical
pipe and 75 mm bend at the end near by Ground level.
Rate are Inclusive of all Necessary Fittings required for
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
43 Providing and fixing to wall, ceiling and floor U.PVC 206.00 Rmt 276.04 Rupees Two Hundred
SWR Soil Waste Pipe with 'O' Ring 75 mm dia. of ISI Seventy Six And Paise
13592/92. Rate inclusive of All fittings like single or Four Only
double 'Y' with door, reducer, coupler single 'T' with
door bend, G.I. Slotted Z patti of 16 Gauge
(minimum1.60mm thick) and minimum 6mm dia. U
Clamp with Washer Nut at every 1.50mt. vertical
distance including All Labour Charges etc. complete
and making good the Wall, Ceiling and Floor.
44 Providing and fixing to wall, ceiling and floor U.PVC 155.00 Rmt 509.77 Rupees Five Hundred
SWR Soil Waste Pipe with 'O' Ring 110 mm dia. of ISI Nine And Paise Seventy
13592/92. Rate inclusive of All fittings like single or Seven Only
double 'Y' with door, reducer, coupler single 'T' with
door bend, G.I. Slotted Z patti of 16 Gauge
(minimum1.60mm thick) and minimum 6mm dia. U
Clamp with Washer Nut at every 1.50mt. vertical
distance including All Labour Charges etc. complete
and making good the Wall, Ceiling and Floor.
45 Provinding and fixing in position PVC COWEL VENT to 18.00 No. 16.47 Rupees Sixteen And
pipe 75 mm dia. Paise Forty Seven Only
46 Provinding and fixing in position PVC COWEL VENT to 18.00 No. 28.16 Rupees Twenty Eight And
pipe 110mm Dia. Paise Sixteen Only
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
47 Providing & Laying 24" x 24" Double Charge vitrified 8 63.00 Sqm 1458.33 Rupees One Thousand
to 10 mm thick tile flooring over 20 mm (average) base Four Hundred Fifty Eight
of cement mortar 1:6 ( 1 cement: 6 coarse sand) on And Paise Thirty Three
new surface or fixing on existing flooring by adhesive Only
including dismentaling of existing flooring and material
jointed with color cement slurry including finised with
flush pointing & cleaning the surface etc. complete for
Anti Skid. material shall be used as per approved make
as per GSPHCL. size and shade as per approved
drawings or as per diection of engineer in charge.
48 Providing and laying Ceramic tiles 8-10mm thick in 133.00 Sqm 1081.15 Rupees One Thousand
riser of steps and dado on a bed of 10mm thick Eighty One And Paise
cement mortar 1:3 (1-cement : 3-coarse sand ) finishing Fifteen Only
with white cement with required pigment. Size of the
tiles shall be as mentioned in specified tender item.
Brand of the tiles shall be as per approved make list of
49 Providing and laying 25mm thick polished KOTAH 143.00 Sqm 1108.30 Rupees One Thousand
STONE SLAB FLOORING over 20mm average thick One Hundred Eight And
base of cement mortar 1:6(1 cement; 6 coarse sand) Paise Thirty Only
over and jointed with grey cement slurry including
rubbing and polishing etc. complete for All floors.
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
50 Providing and fixing concealed center point to wall 130.00 Rmt 654.04 Rupees Six Hundred Fifty
ceiling & floor CPVC (SDR 13.5) PIPE having National Four And Paise Four Only
Sanitation Foundation (NSF) seal for potable water of
following dia. nominal bore tube fittings and clamps
including making good the wall, ceiling and floor etc.
complete. [F] 50mm.
51 Providing and fixing concealed center point to wall 204.00 Rmt 443.29 Rupees Four Hundred
ceiling & floor CPVC (SDR 13.5) PIPE having National Forty Three And Paise
Sanitation Foundation (NSF) seal for potable water of Twenty Nine Only
following dia. nominal bore tube fittings and clamps
including making good the wall, ceiling and floor etc.
complete. [E] 40mm.
52 Providing and fixing Concealed center point to wall, 222.00 Rmt 251.31 Rupees Two Hundred
ceiling and floor CPVC pipes SDR-13.5 PIPE having Fifty One And Paise Thirty
national sanitation foundation (NSF) seal for potable One Only
waterof following dia nominal bore tube fitting and
clamps including making good the wall,ceiling and floor
etc..complete. [C] 25 mm inner dia.
53 Providing and fixing Concealed center point to wall, 208.00 Rmt 206.73 Rupees Two Hundred Six
ceiling and floor CPVC pipes SDR-13.5 PIPE having And Paise Seventy Three
national sanitation foundation (NSF) seal for potable Only
waterof following dia nominal bore tube fitting and
clamps including making good the wall,ceiling and floor
etc..complete. [B] 20 mm inner dia.
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
54 Providing and fixing in position ISI marked Rotational 8000.00 Litre 3.91 Rupees Three And Paise
moulded Polyethylene double layer cylindrical Ninety One Only
vertical storage Tank (IS : 1270) water Tank Size
including marking inlet and outlet. Over flow and
washout arrangement with G.I. connection including
using necessary M.H. for connection etc. complete with
closed cover including applying two coats of oil painting
outside the Tank etc. complete.
55 Providing and fixing PVC Water tank cover including 19.00 No. 815.12 Rupees Eight Hundred
necessary screw for Fixing and applying two coats of oil Fifteen And Paise Twelve
painting outside the tank Cover etc. complete. Only
56 Provinding and fixing gun metal check or non return full 16.00 No. 2302.33 Rupees Two Thousand
way WHEEL / HANDLE VALVE 50 mm dia. Three Hundred Two And
Paise Thirty Three Only
57 Provinding and fixing gun metal check or non return full 28.00 No. 656.86 Rupees Six Hundred Fifty
way WHEEL / HANDLE VALVE 40 mm dia. Six And Paise Eighty Six
58 Provinding and fixing gun metal check or non return full 72.00 No. 416.47 Rupees Four Hundred
way WHEEL / HANDLE VALVE 25 mm dia. Sixteen And Paise Forty
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
59 Providing and fixing wsh down water closet (European 3.00 No. 1631.83 Rupees One Thousand
type, W.C. Pan) with integral P or S trap including Six Hundred Thirty One
jointing the trap with soil pipe in Cement Mortar 1:1(1- And Paise Eighty Three
Cement:1-finesand) (Seal and covertobe measured and Only
paid for separately) (A)vitreous China Pattern:(i)in white
colour Providing and fixing plastic seat and cover for
wash down watercloser with C.P.brasshinges and
rubber buffers. (B) Black plastic seal and cover.
60 Providing & Fixing Single Hole Wash Basin with C.I or 31.00 No. 1344.34 Rupees One Thousand
M.S. brackete & M. I . fisher union, P.V.C water pipe Three Hundred Forty Four
with Connection from Stop Cock to Pillar Tap, PVC And Paise Thirty Four
Bottle Trap with Connection 32mm dia. C.P. brassa Only
waste coupling etc. Complete. Rate are inclusive of all
matreials, Labour & Necessary Fittings etc. Complete
as per Detailed Drawings, Specifications and as per the
Instruction of Engineer In charge. The Model & Make of
Wash Basin Shall be as per the Approved Make List of
61 Providing & Fixing Pillar Cock. Rate are inclusive of all 1.00 No. 976.73 Rupees Nine Hundred
matreials, Labour & Necessary Fittings etc. Complete Seventy Six And Paise
as per Detailed Drawings, Specifications and as per the Seventy Three Only
Instruction of Engineer In charge. The Model & Make of
Pillar Cock Shall be as per the Approved Make List of
62 Providing & Fixing Health flaucet make & Model No 3.00 No. 441.75 Rupees Four Hundred
As per Approved material list of GSPHCL Incl. with all Forty One And Paise
neccery fitting etc. Complete. Seventy Five Only
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
63 Providing & Fixing Stop /Angle COCK 15mm dia 58.00 No. 665.51 Rupees Six Hundred Sixty
make & Model No As per Approved material list of Five And Paise Fifty One
G.S.P.H.C.Ltd Incl. with all neccery fitting etc. Only
64 Providing & Fixing 32 mm Rigid PVC pipe for Sink out 109.00 No. 75.00 Rupees Seventy Five
let to Wash NT etc. Complete. Only
65 Providing & Fixing C.P. Brass Waste for Washbasin or 64.00 No. 67.24 Rupees Sixty Seven And
Sink (A) 32 mm Paise Twenty Four Only
66 Providing & Fixing BIB COCK with wall flange model 54.00 No. 990.61 Rupees Nine Hundred
flora model No Model no as per approved material list Ninety And Paise Sixty
of GSPHCL incl.ith all neccery fitting One Only
67 Providing & Fixing 15mm P.V.C. Bib Tap. Rate inslusive 336.00 No. 129.15 Rupees One Hundred
all labour and tools etc. Complete. Twenty Nine And Paise
68 Providing and fixing S.W. gully trap with C.I. grating 16.00 No. 1176.94 Rupees One Thousand
brick masonry chamber and watertight precast R.C.C. One Hundred Seventy Six
cover with frame of 300 mm. x 300 mm. size (Inside) And Paise Ninety Four
with standard weight: (A) square mouth trap 100 mm. x Only
100 mm. size P trap
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
69 Constructing Brick work using common burnt clay 11.00 No. 3793.18 Rupees Three Thousand
Building Brick masonary block in course for under Seven Hundred Ninety
ground inspection chamber and bends with stone of Three And Paise Eighteen
approved quality in cement mortar 1:5 R.C.C top slab Only
with 1:2:4 mix (1cement; 2 coarse sand; 4 graded
stone aggregates of 20 mm nominal size) with 8mm
dia. Steel at 15cm c/c and providing and fixing 45 x 45 x
5mm angle frame so as to provide of size 450mm x
600mm & fixing precast R.C.C cover of size 60cm x
45cm x7cm foundation concrete 1:5:10 inside plaster
15 mm thick with cement mortar 1:3 finished smooth
with floating coat of neat cement on walls and bed
concrete etc. comp. Rate are also inclusive of outside
plaster 15mm thick in cm 1:3 from top of chamber and
all side up to 15cm deep below ground level. (I) Inside
dimensions are 455mm X 610mm X 450mm deep for
multi purpose pipe line.
70 Extra over above item for additional depth of 0.1 m or 32.00 No. 239.99 Rupees Two Hundred
part thereof beyond 450mm depth for brick masonary Thirty Nine And Paise
chamber for (I) 610 x 455 Ninety Nine Only
71 Repairing of Inspection Chember Inside Dimension of 32.00 No. 500.00 Rupees Five Hundred
IC (455mm x 610mm) etc. Complete. Only
72 Providing & Fixing Precast R.C.C Frame with cover 10 47.00 No. 1702.00 Rupees One Thousand
Ton (Rubber Mould Finish) inner size 600 x 450mm with Seven Hundred Two Only
all necessary fittings.
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
73 Scrubbing of existing colour and Painting two coats ( 1513.00 Sqm 102.75 Rupees One Hundred
Excluding priming coat ) on previously painted steel and Two And Paise Seventy
other material surfaces with enamel paint brushing to Five Only
give an even shade including cleaning the surface of all
dirt, dust and other foreign matter.
74 Scrubbing of existing colour and Painting two coats ( 3100.00 Sqm 119.48 Rupees One Hundred
Excluding priming coat ) on previously painted wood Nineteen And Paise Forty
and wood based surfaces with enamel paint brushing to Eight Only
give an even shade including cleaning the surface of all
dirt, dust and other foreign matter.
75 Removing dry or oil bound distemper by a washing and 6930.00 Sqm 13.71 Rupees Thirteen And
scraping and sand papering the Ceiling surface smooth Paise Seventy One Only
including necessary repairs to scratches Complete
76 Distempeing (two coats) with oil bound distemper of 7500.00 Sqm 87.17 Rupees Eighty Seven And
approved brand and manufacture and of required Paise Seventeen Only
shade on Ceiling surface to give an even shade, over
and including a priming coat with distemper primer of
approved brand and manufacture after thoroughly
mortar droppings and other foreign matter and also
including preparing the surface even including lapi
finishing and sand papered smooth.
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
77 Finishing Ceiling / Slope Surfaces with Plastic Emulsion 720.00 Sqm 197.55 Rupees One Hundred
Paint on Ceiling / Slope Surfaces (Two Coats) to give Ninety Seven And Paise
an Required shape and even shade after thoroughly Fifty Five Only
brushing the surface to remove all dirt, and remains of
loose powdered materials and finishing smooth etc.
complete. Rate are inclussive of Applying Two Coats of
Lappy (Putty) and One Coat of Primer on New Wall
Surfaces to give an even shade including throughly
brushing the surface free from mortar droppings and
other foreign matter and sand papered smooth. [Paint
and Putty should be As per approved make list Of
GSPHCL] etc. Complete for ALL FLOORS.
78 Removing dry or oil bound distemper by a washing and 31917.00 Sqm 11.97 Rupees Eleven And Paise
scraping and sand papering the wall surface smooth Ninety Seven Only
including necessary repairs to scratches Complete
79 Distempeing (two coats) with oil bound distemper of 19055.00 Sqm 78.50 Rupees Seventy Eight
approved brand and manufacture and of required And Paise Fifty Only
shade on wall surface to give an even shade, over and
including a priming coat with distemper primer of
approved brand and manufacture after thoroughly
mortar droppings and other foreign matter and also
including preparing the surface even including lapi
finishing and sand papered smooth.
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
80 Finishing Walls with Plastic Emulsion Paint on Wall 1615.00 Sqm 183.82 Rupees One Hundred
Surfaces (Twocoats) to give an Required shape and Eighty Three And Paise
even shade after thoroughly brushing the surface to Eighty Two Only
remove all dirt, and remains of loose powdered
materials and finishing smooth etc. complete. Rate are
inclussive of Applying Two Coats of Lappy (Putty) and
One Coat of Primer on New Wall Surfaces to give an
even shade including throughly brushing the surface
free from mortar droppings and other foreign matter and
sand papered smooth. [Paint and Putty should be As
per approved make list Of GSPHCL] etc. Complete for
81 Finishing walls with Weather Proof Exterior Emulsion 15395.00 Sqm 155.21 Rupees One Hundred
Paint on Wall Surfaces (Two Coats) over and above Fifty Five And Paise
Applying one coat of Primer to give an Required shape Twenty One Only
and even shade after thoroughly brushing the surface to
remove all dirt, and remains of loose powdered
materials etc. complete. Primer and Exterior
Emulsion Paint shall be used as per approved
material list of GSPHCL.
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
82 Providing and fixing 0.50 metre high vertically & 0.65 735.00 Rmt 561.53 Rupees Five Hundred
metre inclined with .30mt embeded in wall total length Sixty One And Paise Fifty
of 1.45mt MS Angle post 40 x 40 x5 mm and oil Three Only
painting 3 coats fixed at equal inner wall as directed by
Engineer in Charge with 3 horizontal line and two
diagonal on inclined angle, two horizontal line & two
diagonally on verticaly post, total 9 line of Galvanized
steel BARBED wire, weight 9.38 Kg per 100 metre,
strained and fixed to posts in grouting with 0.31mt x
0.31mt x 0.30mt Block in CC1:1.5:3 etc complete.
83 Providing & Fixing 3mm thick acrylic sheet with vinyl 5.00 Sqm 7193.89 Rupees Seven Thousand
letter colour-2073-dark grey for back ground and colour - One Hundred Ninety
2190-white letter with required screws etc as per Three And Paise Eighty
required sizes complete etc as per specification & Nine Only
instruction of engineer in charge.
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
84 [a] Providing and erecting Point wiring with approved 1.1 90.00 Point 382.00 Rupees Three Hundred
KV Grade ISI mark 2×1.5 mm2 copper FRLS PVC Eighty Two Only
insulated wire with 1.5 mm2 copper FRLS PVC
insulated wire for earth continuity in 25/32 white
Approved’ make press fit casing capping with double
locking arrangement with grooves, trunking of size not
below 10/12 mm in height IS:14927 ISI Part–II and with
Approved make white accessories like inside and
outside coupler, elbow, tee junction boxes etc. Also not
below 1.8 mm thick duly sealed at joinst and 6A
Modular type switch / bell push & accessories and earth
continuity of following type, erected on PVC /
Metallic/Wooden box, single mounting base frame
covered with textured/metallic/white front plate modules
erected on wall / ceiling as per pipe erected, with
necessary Lamp holder/ceiling rose / H.D.Connector
(make & model approved by EIC and matching colur
with switches accessories) as directed. For Open
Wiring. For Light Point. Cat-II [conductor resistance
should be as per IS:8130/1984]
[Length of point wiring must not increase than 10 mtr.
For that necessary switch board and their location must
be finalised before execution by agency otherwise
payment will not be done for extra long point. For future
extention, if required, agency has to erect one higher
size box as per instruction of EIC & Wire must be
having box packing].
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
84 [b] For Bell Point Cat-II 2.00 Point 382.00 Rupees Three Hundred
Eighty Two Only
84 [c] For Fan Point (with 6 A. Modular type switch and 25.00 Point 568.00 Rupees Five Hundred
two module hum free EME Five step type Electronic Sixty Eight Only
fan regulator both are with ISI Mark)) Cat.-II
84 [d] For Separate Point (with 6 Amp. Switch & 3/5 Pin 20.00 Point 410.00 Rupees Four Hundred
socket both having ISI mark) Cat-II Ten Only
84 [e] For Loop on switch board (with 6 Amp. Switch & 50.00 Point 234.00 Rupees Two Hundred
3/5 Pin socket both having ISI mark) Cat-II Thirty Four Only
85 [a] Providing & erecting Point wiring with approved ISI 415.00 Point 425.00 Rupees Four Hundred
marked 1.1 KV grade 2 X 1.5 sq.mm. copper PVC Twenty Five Only
insulted FRLS wire with 1.5 sq.mm. (green) copper PVC
insulated FRLS wire for earth continuity in FIA approved
ISI mark medium class white colour 20/25 mm dia.
embossed rigid PVC pipe with PVC fitting fixed with
adhesive solution erected on brick wall along with
approved make 5/6 Amp. ISI mark modular type switch
and accessories mounted in 20 G. G.I. company
fabricated metallic box / PVC / polycarbonet / acrylic
Box covered with appropriate front plate modules
erected flushed with wall / ceiling with necessary
modular lamp holder / modular ceiling rose / HD
Connector (make & model approved by EIC and
matching colur with switches accessories) as directed
for concealed wiring Deep Junction box 75mm depth if
required) (a) Light point. Cat.-II (For Open Wiring).
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
[Length of point wiring must not increase than 10 mtr.
For that necessary switch board and their location must
be finalised before execution by agency otherwise
payment will not be done for extra long point. For future
extention, if required, agency has to erect one higher
size polished wooden box as per instruction of EIC &
Wire must be having box packing]. For Light point
[conductor resistance should be as per
85 [b] For Bell Point Cat.-II 33.00 Point 425.00 Rupees Four Hundred
Twenty Five Only
85 [c] For Fan Point (with 6 A. Modular type switch and two 100.00 Point 612.00 Rupees Six Hundred
module hum free EME Five step type Electronic fan Twelve Only
regulator both having ISI mark) Cat.-II
85 [d] For separate Point (with 6 Amp. Switch & 3/5 pin 135.00 Point 455.00 Rupees Four Hundred
socket both having ISI mark) Cat.-II Fifty Five Only
85 [e] For Looped on switch board (with 6 Amp.Switch & 3/5 240.00 Point 234.00 Rupees Two Hundred
pin socket both having ISI mark) Cat.-II. Thirty Four Only
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
86 [a] Point wiring for Light / Bell with 2-1.5 sq.mm & earth 80.00 Point 340.00 Rupees Three Hundred
wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 Forty Only
KV grade FRLS PVC insulated multi strand copper
wires up to 10 mtr length , in below type of pipe erected
with 6A Modular type switch / bell push & accessories
and earth continuity of following type, erected on PVC /
Metallic/Wooden box, single mounting base frame
covered with textured / metallic / white front plate
modules erected on / in wall / ceiling as per pipe
erected, with necessary Lamp holder/ceiling rose /
H.D.Connector as directed. (e) in existing pipe erected
flushed on wall / ceiling complete Cat-II
Necessary sheet / tape / polythene / sand must be
erected or filled in all box to prevent mortar going into
the box. Length of point wiring must not increase than
10 mtr. For that necessary switch boards and their
locations must be finalised before execution by agency
otherwise payment will not be done for extra long point.
(For future extention, if required, agency has to erect
one higher size metal box and modular plate as per
instruction of EIC. Cost of blank plate shall be paid as
per tender item) [This item include cleaning
(inside/outside) of all G.I. switch boards, electric point
box, fan box, MCBDB & box cutting plaster finishing for
modular plate without any gap] [conductor resistance
should be as per IS:8130/1984]
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
87 [a] Providing following type of Modular Type Accessories 232.00 Each 124.00 Rupees One Hundred
mounted with PVC / metallic/Wooden box, single Twenty Four Only
mounting base frame covered with textured /
metallic/white front plate , modules erected with
necessary connections as per site situation directed by
Engineer In charge. (1)One No. SP 6 Amp.
87 [b] (4) TV Co-axial Socket outlet 89.00 Each 139.00 Rupees One Hundred
Thirty Nine Only
87 [c] (5) Electronic hum Free steps EME Fan regulator 52.00 Each 338.00 Rupees Three Hundred
Thirty Eight Only
87 [d] (7) Blank Plate Single 315.00 Each 16.00 Rupees Sixteen Only
87 [e] (8) Computer RJ-45 socket 26.00 Each 139.00 Rupees One Hundred
Thirty Nine Only
87 [f] RJ-11 Telephone Socket (For One Gang) Cat-II 10.00 Each 130.00 Rupees One Hundred
87 [g] (9) 16 Amp. SP one way switch 57.00 Each 130.00 Rupees One Hundred
87 [h] (10) 6/16Amp. Universal socket 129.00 Each 139.00 Rupees One Hundred
Thirty Nine Only
87 (11) 6 Amps. Bell Push 52.00 Each 110.00 Rupees One Hundred Ten
87 (13) 6A/10A/16A/20A/25A/32A Single pole Modular 39.00 Each 267.00 Rupees Two Hundred
[j] MCB Switch Sixty Seven Only
87 [k] (19) Modular Indicating Call Bell 20.00 Each 326.00 Rupees Three Hundred
Twenty Six Only
87 [l] (20) Modular Buzzer 20.00 Each 128.00 Rupees One Hundred
Twenty Eight Only
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
87 (22) 16/20/25 Amp. Modular Starter for Motor / A.C. 4.00 Each 394.00 Rupees Three Hundred
[m] Unit Complete Ninety Four Only
87 [n] (24) Batten Holder/Angle Holder with modular frame 139.00 Each 64.00 Rupees Sixty Four Only
with metal ring.
88 [a] Providing and laying Mains with FRLS PVC Insulated 300.00 Mtr. 56.00 Rupees Fifty Six Only
wire ISI marked 1.1 KV grade in 25/32 white approved
make press fit casing capping with double locking
arrangement with Company fabricated metel grooves,
trunking of size not below 10/12 mm in height IS:14927
ISI Part–II and with approved make white accessories
like inside and outside coupler, elbow, tee, junction
boxes etc. Also not below 1.8 mm thick duly sealed at
joinst with FRLS PVC insulated wire for earth
continuity. (Approved ISI make only) [a] 2 x 1.5 sq.mm.
FRLS copper multi stranded conductor mains with
1.5 sq.mm. FRLS copper multi stranded conductor
for earthing as per standard colour code. [conductor
resistance should be as per IS:8130/1984]
88 [b] 2 x 2.5 sq.mm. FRLS copper multi stranded 20.00 Mtr. 82.00 Rupees Eighty Two Only
conductor mains with 1.5 sq.mm. FRLS copper multi
stranded conductor for earthing as per standard colour
code. [conductor resistance should be as per
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
88 [c] 2 x 4.0 sq.mm. FRLS copper multi stranded 50.00 Mtr 95.00 Rupees Ninety Five Only
conductor mains with 2.5 sq.mm. FRLS copper multi
stranded conductor earthing..As per standard colour
code. [conductor resistance should be as per
88 [d] 2 x 6.0 sq.mm. FRLS copper multi stranded 200.00 Mtr. 135.00 Rupees One Hundred
conductor mains with 2.5 sq.mm. FRLS copper multi Thirty Five Only
stranded conductor for earthing as per standard colour
code. [conductor resistance should be as per
89 [a] Providing and laying Mains with FRLS PVC Insulated 250.00 Mtr. 46.00 Rupees Forty Six Only
wire ISI marked 1.1 KV grade in Existing Pipes to be
erected In/on brick wall /Slab with FRLS PVC insulated
wire for earth continuity. (Approved ISI make only) [a]
x 1.5 sq.mm. FRLS copper multi stranded conductor
mains with 1.5 sq.mm. FRLS copper multi stranded
conductor for earthing as per standard colour code.
89 [b] 2 x 2.5 sq.mm. FRLS copper multi stranded conductor 150.00 Mtr. 62.00 Rupees Sixty Two Only
mains with 1.5 sq.mm. FRLS copper multi stranded
conductor for earthing as per standard colour code.
89 [c] 2 x 6.0 sq.mm. FRLS copper multi stranded conductor 200.00 Mtr. 120.00 Rupees One Hundred
mains with 2.5 sq.mm. FRLS copper multi stranded Twenty Only
conductor for earthing as per standard colour code.
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
90 [a] Providing and laying Mains with FRLS PVC Insulated 1750.00 Mtr. 62.00 Rupees Sixty Two Only
wire ISI marked 1.1 KV grade with FIA approved ISI
mark medium class 20/25/32 mm dia. embossed rigid
PVC pipe with PVC fitting fixed with adhesive solution to
be erected on brick wall /Slab with FRLS PVC insulated
wire for earth continuity. (Approved ISI make only) [a]
x 1.5 sq.mm. FRLS copper multi stranded conductor
mains with 1.5 sq.mm. FRLS copper multi stranded
conductor for earthing as per standard colour code.
90 [b] 2 x 6.0 sq.mm. FRLS copper multi stranded conductor 1350.00 Mtr. 146.00 Rupees One Hundred
mains with 2.5 sq.mm. FRLS copper multi stranded Forty Six Only
conductor for earthing as per standard colour code.
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
91 Providing and erecting Plug Point wiring with 15.00 Point 624.00 Rupees Six Hundred
approved ISI make 2 x 2.5 sq.mm copper PVC Twenty Four Only
insulated FRLS wire with 1.5 sq.mm (green) copper
PVC insulated FRLS wire for earth continuity in 25/32
white approved make press fit casing capping with
double locking arrangement with Company fabricated
metel grooves, trunking of size not below 10/12 mm in
height IS:14927 ISI Part–II and with approved make
white accessories like inside and outside coupler,
elbow, tee, junction boxes etc. Also not below 1.8 mm
thick duly sealed at joinst with FRLS PVC insulated wire
for earth continuit with 16 Amp. ISI marked flush type
modular switch / Socket and accessories erected on
PVC / Acrylic box, single mounting base frame covered
with textured/metallic/white front plate modules erected
on / in wall / ceiling as per pipe erected. For open wiring
[a] 16 A.Indicator switch & 1 No. 6/16 A. universal
socket combined white colour suitable for 3 pin top
duly. Cat.-II. (Conductor resistance should be as per
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
92 Providing and erecting Plug Point wiring with 135.00 Point 678.00 Rupees Six Hundred
approved ISI make 2 x 2.5 sq.mm copper PVC Seventy Eight Only
insulated FRLS wire with 1.5 sq.mm (green) copper
PVC insulated FRLS wire for earth continuity in white
FIA approved ISI mark medium class 20/25/32 mm
dia. embossed rigid PVC pipe with PVC fitting with
approved make white accessories with FRLS PVC
insulated wire for earth continuit with 16 Amp. ISI
marked flush type modular switch / Socket and
accessories erected on PVC / Acrylic / polycarbonet
box, single mounting base frame covered with
textured/metallic/white front plate modules erected on /
in wall / ceiling as per pipe erected. For open wiring [a]
16 A.Indicator switch & 1 No. 6/16 A. universal
socket combined white colour suitable for 3 pin top
duly. Cat.-II. (Conductor resistance should be as per
93 [a] Providing and erecting 1.5 mm thick FIA approved and 696.67 Mtr. 24.00 Rupees Twenty Four Only
ISI mark (embossed) RIGID white Colour PVC PIPES
of following size complete erected with necessary PVC
fittings & Junction boxes fixed with adhesive solution
concealed in wall / slab along with contineous fish wire
to draw mains, laid in approved manner with plastering
by cement mortar & finishing the surface to match the
wall / ceiling. 20 mm dia.
93 [b] 25 mm dia. 120.00 Mtr. 33.00 Rupees Thirty Three Only
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
94 [a] Supplying & erecting UPVC Mini trunking (PVC Casing- 300.00 Mtr. 31.00 Rupees Thirty One Only
n-Caping) having double-locking arrangement with
grooves, trunking of size not below 12.5 mm in height
as per IS with accessories of PVC/Resin polypropylene
not below 1.8 mm thick duly sealed in joint & erected on
wall / ceiling of following size. (1) 25 mm
94 [b] 20 mm dia. 250.00 Mtr. 22.00 Rupees Twenty Two Only
94 [c] 32 mm dia. 100.00 Mtr. 36.00 Rupees Thirty Six Only
95 Supplying and laying UPVC cable trunking system 100.00 Mtr. 275.00 Rupees Two Hundred
comprising unplasticised polyvinyl, chloride rigid Seventy Five Only
material with ignition free & flame proof confirming BS
.All necessary accessories and measuring of following
sizes. [1] 75 mm x 50 mm trunking.[MK, LEGRAND,
OBBO make Only]
96 Providing & fixing 25 mm. dia. PVC insulated G.I. 200.00 Mtr. 37.14 Rupees Thirty Seven And
Corrugated Flexible pipe with necessary socket, PVC Paise Fourteen Only
bushes, saddle, Check-nuts etc. complete of following
97 Providing & fixing 20 mm. dia. PVC insulated G.I. 50.00 Mtr. 30.95 Rupees Thirty And Paise
Corrugated Flexible pipe with necessary socket, PVC Ninety Five Only
bushes, saddle, Check-nuts etc. complete of following
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
98 Providing & Erecting 2.0 mtr long Earthing system by 25.00 Each 7025.00 Rupees Seven Thousand
making minimum bore of 225 mm dia in soft soil. Twenty Five Only
Suitable for doing pipe-in-pipe technology
earthing.Earthing electric rod must be made from
Corrosion free Hot dip galvanizing pipes having
following specification.
(A) Earthing Electrode: outerpipe:- 88 mm minimum
O.D., ISI 'B ' Class ISI mark of Reputed Brand, Inner
pipe:- 42 mm minimum O.D., Pipe B Class ISI mark
reputed Brand Terminal Size: 70mm X 100mm length,
Terminal Should be made from inner pipe for that pipe
must be pressed and gave rectangular shape so its
work as a terminal.The hot deep galvanising must be
done after above process.Galvanised thickness must
be minimum 75 micron any where. SS Nut bolt:-
no.with washer suitable for 14 mm dia. hole must be
provided at terminal. total minimum Weight(approx.) of
earth electrodewith inside conductive material
minimum should be 26 kg.
(B) Inner chemical (CCM Compound) - Resistivity:-
ohm/meter testing as per IEC 62561-2017, Voltage
drop:- < 1 volt at no load & dry form, Sulphar content:-
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
(C) Back fill Compound:- Earthing compound should be
capable to retain moisture for long time Back Filling
Compound weight is 25 Kg.
(D) Chamber and cover:- Earthing chamber should be
size of 400 mm X 400 mm X 400 mm depth and Cover
should be heavy duty cast iron with required size of
mm X 300 mm X 4 mm thick.
Necessary test report must be submitted.
1. Short circuit test by ERDA/ CPRI for 25KA
2. Resistivity test of conducting material from NABL
accredited lab.
3. Hot dip galvanised / zinc coating micro test from
reputed laboratory.
4. General test report from OEM regarding specification
[Make and model approved by EIC Strictly subject to
item specification only] [OEM has to submit all detail &
sample for approved before supplying]
[Water must be poured in bore before starting earthing.
Earthing value must be measured with earth tester.
Agency has to bring the earth resistance to at least
ohms & voltage between neutral & Earthing upto
volt. Agency has to maintain earthing & its value for one
year. Earthing must be done in the presence of A.E.
99 For Above Earthing Additional charges for boring in 25.00 Each 276.00 Rupees Two Hundred
hard rock soil (By Breaker) & filling soft soil in earth pit. Seventy Six Only
(Certificate for soil have to given by DEE/AE along with
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
100 Supplying and Erecting LED indoor fitting of 243.00 Each 370.00 Rupees Three Hundred
approximately 4 feet long with LED of wat age 0.2W to Seventy Only
0.5W assemble on single MCPCB with housing use as
a heat sink shall be made from Aluminum extrusion
having enough strength (sample must be approved by
EIC) with polycarbonate diffuser with following
specification: (A) Company mark/name on the fitting.(B)
Rated input voltage and frequency: 220V to 240 VAC ;
50Hz. (C) Rated input wattage: max. 24w (D) Rated
input current : 0.2 Amp, (E) Power Factor : Min. 0.90,
(F) ATHD : Max. 15% , (G) Rated Luminous flux: Min.
2420 lm, (H) CCT: 6500K, (I) CRI: Min. 80Ra, (J) Driver
Ef iciency: Min. 80%, (K) LED life span: Min. 50000 Hrs
@ L70, (L) Over Voltage protection: Withstand up to
440V/AC for 4 Hrs., (M) Surge protection : Min. 2KV,
(N) IP rating: IP 20, (O) IK rating : IK 02, (P) Short
circuit , Open circuit & Reverse Polarity Protection must
be provided (Q) Fixing clamp design & strength should
be suf icient to hold the fitting erected on wall or ceiling.,
(R) 3 core copper wire of appropriate size with earthing
connector (Note:-The manufacturer/ authorized
Channel partner of the manufacturer has to submit
yrs free replacement Guarantee for complete Fixture)
[Approval will be given strictly subject to item
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
101 Providing, erecting, testing Ceiling Fan confirming to 135.00 Each 1929.00 Rupees One Thousand
IS: 374/1979 AMDT No. 1 to 6 Class-I, 50 Hz. Nine Hundred Twenty
Specification of Ceiling Fan must be as per below. (1) Nine Only
Sweep: 1200 mm, (2) Operating Voltage: 180 to 230 V,
(3) Power Factor: > 0.9, (4) Power Consumption:
maximum 53W, (5) RPM: minimum 330, (6) Service
value:min 4.3 m3/min. (7) Class of insulation: 'B', (8)
No. of heavy duty premium quality Ball bearing: Two,
(9) Total Body: Top & Bottom should be alluminium,
(10) Blade: Aluminium approx 1.1 mm thick, (11)
Colour: White high grade powder coating, (12) Canopy:
Two Nos. Heavy duty, (13) Condenser: min 1.5 MFD
(155 Tolerance) as per is 1709-1984, Aluminium body
premium quality, Branded make,(14) Down road: up to
1.0 mtr as per site requirment, (15) Required fixing
accessories, (16) 3 core 0.50 sq.mm ISI wire as per site
requirment, (17) No vibration and noise due to
mechanical parts. (Agency has to erect safey wire with
ceiling fan and checked with EIC) (OEM has to
approved model as per tender specification and tested
at ERDA) (Necessary test reports should be submitted
strictly at the time of approval. Sample approved by EIC
subject to above specification only)
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
102 Poviding and erecting max.10 Watt LED battern having 72.00 Each 164.00 Rupees One Hundred
main housing aluminium extruded & front cover of Sixty Four Only
polycarbonate. Electrically & photomatry parameters
are as under : 240V, 50 Hz., System voltage : 10w ±
10% PF ≥ 0.95 , system lumens min. 1000, CCT;3000K
to 6500K,CRl≥ 80, THD ≤ 15 % ,Delivery efficieny ≥
%, LM 80 certified LED, 30000 hrs. @ L70, Electronic
CC driver, insulated copper wire for internal wiring, IP
20, Operating voltage : 160 to 270 V , surge - 2 KV
,length of this fitting decied by EIC.
103 Supplying and erecting 8 W LED lamps with following 245.00 Each 111.00 Rupees One Hundred
wattage capacity of 220 to 240 voltage, minimum 15000 Eleven Only
burning hours life, 500 V in built-surge
protection,Polycarbonate diffuser, mounting suitable for
E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps
integral type, with PC diffuser suitable LAMP holder
104 Providing and erecting Polycarbonet body surface 26.00 Each 780.00 Rupees Seven Hundred
mounting LED Bulk head type 9 watt Lighting Fitting Eighty Only
with electronic driver having THD < 15%, CRI>80,
P.F.0.95 And lumen output from luminaire 720 lm, input
voltage range 160-270 V AC, 50 Hz cool white (3000 to
6500 k), inbuilt driver having efficiency >=80lm/w, -20
deg C to + 60 deg C working temperature, AL frame
with Beam Angle 120 deg.
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
105 Supplying & Erecting Decorative Ding Dong bell 250 35.00 Each 170.00 Rupees One Hundred
Volt complete erected on existing polished wooden Seventy Only
block or in M.S. box with 3 mm thick white ISI mark
laminated sheet. [Anchor (Chime model), vision,
106 SITC of specified make X color for Cat.-6 Data and Y 100.00 Mtr 47.00 Rupees Forty Seven Only
color for Cat.-6 voice cable to be done in prelaid PVC
pipe / raceway, but without the cost of raceway or pipe
(the wire is to be drawn from MFD/ JB to outlet point)
(a) CAT - 6 (For Computer Cabling and For Voice
Cabeling) (Molex / D-Link / Dax make Only)
107 Providing & erecting Switch board for Computer or 26.00 Each 1023.00 Rupees One Thousand
electric apparatus consisting of following modular Twenty Three Only
accessories in single board erected on Metal board
with 3 mm thick PC (Polycarbonet) / Acrylic sheet
erected as directed. 2 no. 6/16 Amp. universal
Socket, 2 nos. 16 Amp. indicator switch, 2 nos.
Amp. Switch & 2 nos. 6 Amp. 3/5 pin Plug. For
Computer power Supply board. Cat.-II
108 Providing & erecting following size of TV Co-axial 50.00 Mtr. 39.00 Rupees Thirty Nine Only
flexible cable comprising inner conductor of solid bare
copper insulated with Foam PE & Secondary conductor
made of poly - Aluminium film bonded Al. Braids @
suitable coverage overall sheathed with black PVC
insulation.[b] RG-6 [Polycab/ Finolex / RR Kabel
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
109 Providing & Erecting Telephone Cable electrolytic 60.00 Mtr. 20.00 Rupees Twenty Only
copper conductor PE insulation twisted in two pairs, &
wrapped with FRLS PVC tape & sheathed with FRLS
PVC or HFFR outer Jacket suitable for telephone wiring
& confirming to C-DOT erected in existing pipe.of
following size of conductors & nos.of pairs. With
necessary connections. (A) Conductor size 0.5 mm (a)
Unarmoured (2) Two pairs. [Make and model approved
by EIC Strictly subject to item specification only]
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
110 Providing ad erecting approved make single phase 41.00 Each 5536.00 Rupees Five Thousand
Double Door metal clad D.B. as per relevant indian Five Hundred Thirty Six
standards ammended upto date. Only
Supplying and fixing following way single phase MCB
distrubution board of company fabricated sheet box
with powder coated inside and outside after apply
seven tank chemical process of CRCA sheet cover
complete with suitable integral single piece construction
tinned copper busbar and link with all necessary
interconnection and with necessary size MS frame for
mounting MCBDB. MCBDB Door, Back side and Body
of MCBDB must be made of 1.2 mm thick CRCA Sheet.
Manufacturer must be provided (1) IP 43 and as per
IS:8623-1 & 3, IEC 61439-1 & 3 having D type PU
gasket. (2) Seven tank Powder coating Certificate (3)
Tinned Copper/Brass make neutral & Earthing link with
isolation & Protecting Cover for 240 Volts on surface /
recess complete with loose wire box, terminal
connectors for all incoming and outgoing circuits, with
suitable size FRLS PVC insulated copper conductor up
to terminal blocks and internal connection, tinned
coppper bus bar, 1 no. tinned copper neutral link, tinned
copper earth bar, din bar, detachable gland plate,
interconnections, powder painted including earthing etc.
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
Single phase incoming and horizontal single phase
outgoing. For 16 Way MCBDB: Including 1 no. 40 Amp.
30 mA double pole ELCB (ELCB confirming to
IS:12640/1988 having sensitivity of 30 mA and
breaking capacity of 10 KA), 1 no. MCB 40 Amp. double
pole switch (C curve confirms to IS:8828 having
breaking capacity of 10 KA) and S.P. MCB of rating 6 to
32 Amp. with NL suitable to operate on 240 Volt A.C.
power. (6 Amp:- 4 Nos., 16 Amp:- 4 Nos. & 25 Amp:
(The DBs should be used of same company of MCB /
ELCB to be used) (MCBDB must be erected in line &
level with spirit level and finish the external edge with
box cutting plaster) (Same colour MCB(SP/DP) should
be used as same as MCBDB) [Including Necessary
numbering / marking on box done with red colour
radium sticker as per site requirement and instructions
given by EIC on site. Font / number size given by EIC
on site as per requirement]
111 Providing & erecting 240 V MCB double pole switch for 133.00 Each 327.00 Rupees Three Hundred
motor & inductive load (C Curve) having 10 KA Twenty Seven Only
breaking capacity & confirms to IS:8828 in existing box
having following capacity. For 40 Amp. Cat.III
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
112 Supplying & fixing box for housing RCCB + MCB 133.00 Each 272.00 Rupees Two Hundred
combination made of 18 SWG sheet steel duly powder Seventy Two Only
coated with gasket, dust & vermin proof bakelite shield
two earthing terminals for following type of RCCB,
RCCB + MCB [a] For 2 pole
113 Providing and erecting busbar chamber confirming to 5.00 Rn. 4378.00 Rupees Four Thousand
IS-375 fabricated from 16 GMS sheet dust & vermin Mtr. Three Hundred Seventy
proof having hinged door with rubber gasket and Eight Only
necessary busbar supports with copper busbar having
current density not more than 1.6 amp/sqmm (Rated
current per Cross Section area) duly wired with colour
insulating tape for phase sequence, three phase &
neutral Each equal & one meter long suitable for
following current capacity with necessary painting
mounted on wall or pedestal frame of required size with
necessary incoming and outgoing connections with
proper size of copper strip/wire with lugs as directed.
Suitable for 100 Amp. capacity
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
114 Providing, erecting, fabricating the M.S. structure as 160.00 Kg. 77.00 Rupees Seventy Seven
per requirement of site as per structure design Only
Including proper size approved by EIC of M.S. angles,
flats, bars, square pipe, channels, sections (Tata,
Jindal, Asian, JSI Make) complete with cutting, welding,
grinding and finishing duly painted with Asian/Nerolac
make premium quality oil paint and true care red oxide
metal primer,asian paint make with erection on site as
per direction of engineer in charge with necessary
grouting cementing, plastering and finishing complete.
All hole opening of square pipe end must be closed with
M.S plate welding. Payment will be done on KG as per
115 Supplying & erecting 12 mm thick backelite sheet of 8.00 Sq. Mtr. 2289.00 Rupees Two Thousand
approved make and grade on 25 x 25 x 3 mm red oxide Two Hundred Eighty Nine
painted angle iron frame suitable for fixing ICDP Only
SWITCH and energy meter (contractor shall make
approved drawing of Bakelite sheet To arrange required
No. of Energy meter & ICDP switch-busbar etc. as per
Actual space available in electrical room at site)
116 Providing and erecting metallic vitrified danger notice 4.00 Each 69.00 Rupees Sixty Nine Only
board as per language suggested by engineer incharge
for MEDIUM VOLTAGE installation to be erected as per
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
117 Supplying and erecting approved make Octagonal 21.00 Each 6917.00 Rupees Six Thousand
pole made from HR sheet steel. The pole should be Nine Hundred Seventeen
made as per IS. and shall be coated with hot dip Only
galvanizing as per IS 2629/2633/4759, suitable
suspend local wind speed with integral Junction box
with Hot Deep Galvanised door having 2 nos. 180°
operated hinges & 2 nos. Ln key locking with silicon
rubber gasket. Consist of terminal plate of min 6mm
Hylam sheet, standard profile 35 mm X 7.5 mm Din-
Rail & MCB, Brass stud type terminal and
arrangement for cable termination to be erected on
RCC foundation as per details given by manufacturer
and EIC considering site requirement.
Foundation Details: (1) Grade of RCC 1:2:4, (2) Grade
of steel rainforcement of RCC FE 415, (3) Clear cover
to rainforcement 50mm, (4) Concrete vibrated, (5) use
suttering / farma, (6) Hot deep galvanized average
Micron, (7) Detail drawing will be given by corporation
(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia,
mm thickness with 200 mm X 200 mm X 12 mm base
plate, 4-M16 Bolts and 600 mm long hot deep
galvanized J-Bolt, nuts, washers with 800 mm under
ground and 200 mm above ground level and
Foundation in 1:2:4 proportion as per details given by
manufacturer and EIC considering site requirement.
Approx Pole weight 46 kg. (Make:- Bajaj, Valmont,
Transrail, Ambica,RR Ispat Only) (Test certificate to be
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
118 Providing & erecting bracket consisting of ISI mark "B" 32.00 Each 608.00 Rupees Six Hundred Eight
[a] class G.I. Pipe 4.2 cm outside diameter complete with Only
suitable G.I. Sleeve tubing of 2 mm. thick and required
size and length suitable for 76.5 / 80 mm. required size
of pole top or pipe in pipe surface for terrace as per
instruction of EIC or wall bracket as per instruction of
EIC having nuts and bolts for fixing the brackets and
having spread of 1.0 mtr. length with suitable rise as per
site condition and suitable welded stiffner reducer and
nipple with check nut complete painted with one coat of
yellow zinc and two coats of alluminium paint for Single
arm bracket suitable for pole or terrace as per design
given by EIC (a) For single arm bracket. (Jindal /
Asian / Tata / Surya Prakash make Only)
(Fabricators:- Bajaj, Valmont, Transrail, Ambica, RR
Ispat Only) (Test certificate to be submitted)
118 For Double Arm Bracket 1 Mtr. (Jindal / Asian / Tata / 8.00 Each 821.00 Rupees Eight Hundred
[b] Surya Prakash make Only) (Fabricators:- Bajaj, Twenty One Only
Valmont, Transrail, Ambica, RR Ispat Only) (Test
certificate to be submitted)
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
119 For Wall & Terrace Street light Bracket: 17.00 Each 487.00 Rupees Four Hundred
Providing and Fixing of wall and terrace bracket Eighty Seven Only
consisting of ISI mark "B" class G.I. Pipe 4.2 cm outside
diameter and length suitable for building face for fixing
the brackets and having spread of Upto 0.70 mtr.
length with suitable degree angle as per site situation
suggested by EIC. vertical plane and suitable welded
stiffner reducer and nipple with check nut complete
painted with one coat of red oxide and two coats of
alluminium paint (Zinc Coating before alluminium Paint
is mandatory)with . complete with 150*150*2mm thick
G.I plate with 4no heavy duty galvanized jasti khila of
required size or Single arm bracket (pipe in pipe type)
suitable for terrace as per design given by EIC
Considering parfait, height ,width and total height of
building and type of led fitting. (a) For single arm
120 Supplying and making Coil type earthing, coil made 42.00 Each 368.00 Rupees Three Hundred
from 8 SWG galvanised iron wire with 50 mm OD and Sixty Eight Only
50 turns (length of turns approx. 200 mm) and having
additional continuous streight length of 3.00 mtr at open
end and should be connected to earthing bolt and
burried in 1.5 mtr deep specially prepared earth pit
complete with salt and charcoal/coke as required for
coil type earthing.(Approx weight of coil 1.0 to 1.1 Kgs)
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
121 Providing and Fixing SITC of Outdoor aesthetically 57.00 Each 3512.00 Rupees Three Thousand
designed LED Street Light Luminaire with total Five Hundred Twelve Only
consumption of Max. 45 W with single piece die cast
aluminium housing, high power LED shall be mounted
on high quality metal core PCB with extremely precison
designed heat sink complete with IP66 protection Class
with polycarbonate / thoughened glass cover the fixture
should be suitable for pole/bracket mounting. The
fixture to comply both LM79 and LM 80 guidelines with
LED module min. 130 lumen/watt with toughen Glass
L70 at 50,000 hrs, provided with high quality
polycarbonate lenses for better light distribution. The
Fixture Should be able to be Pole Mounted and also
bracket mounted, provided with high quality driver for
protection against high and low Voltage cut Off,
opertional for high amibient and high humid
envirnoments, THD of driver should be less than 10%
and P.F > 0.95. Also the Fixture should meet the
following technical criterias Oprating range Voltage
to 270 V, system efficiency >= 110 lm/w, and total
lumens not less then 4950, CCT > 5000K, CRI >
beam angle 120 deg, surge immunity level 4 kv integral
& 10 kv non-integral
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
The Separate Potted driver should have over current,
over voltage protection, short circuit protection so that
the fixture recovers once the fault is removed. In
addition to the above product should be operational in
the temperature range of 0 deg to 50 deg and humidity
range of 10% to 90% RH.(Stricly sample approved by
EIC subject to tender specification) (Note:- The
manufacturer/authorized Channel partner of the
manufacturer has to submit 5 yrs free replcement
Guarantee for complete Fixture)(Cool White Color/warm
white/natural white (approved by engineer incharge)
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
122 SITC of Outdoor aesthetically designed LED Street 2.00 Each 6117.00 Rupees Six Thousand
Light Luminaire with total consumption of Max. 90 W One Hundred Seventeen
with single piece die cast aluminium housing, high Only
power LED shall be mounted on high quality metal core
PCB with extremely precison designed heat sink,
complete with IP66 protection Class, with polycarbonate
/ toughened glass cover. The fixture should be suitable
for pole/bracket mounting. The fixture to comply both
LM79 and LM 80 guidelines with LED minimum
lumen/watt with toughen glass, L70 at 50,000 hrs,
provided with high quality polycarbonate lenses for
better light distribution. The Fixture Should be able to
be Pole Mounted and also bracket mounted, provided
with high quality driver for protection against high and
low Voltage cut Off, opertional for high amibient and
high humid envirnoments, THD of driver should be less
than 10% and P.F > 0.95. Also the Fixture should meet
the following technical criterias Oprating range Voltage
160 to 270 V, system efficiency >= 110 lm/w, and total
lumens not less then 9900, CCT > 5000K, CRI >
beam angle 120 deg, surge immunity level at least 4 KV
Integral & 10 KV Non Integral.
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
The Separate Potted driver should have over current,
over voltage protection, short circuit protection so that
the fixture recovers once the fault is removed. In
addition to the above product should be operational in
the temperature range of 0 deg to 50 deg and humidity
range of 10% to 90% RH. (Note:- The
manufacturer/authorized Channel partner of the
manufacturer has to submit 5 yrs free replcement
Guarantee for complete Fixture)
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
123 SITC of Outdoor aesthetically designed LED Flood 2.00 Each 6228.00 Rupees Six Thousand
Light Luminaire with total consumption of Two Hundred Twenty
maximum 90 W with single piece die cast aluminium Eight Only
housing, LED's mounted on high quality metal core
based PCB with extremely precison designed heat sink,
complete with IP66 protection Class, with polycarbonate
/ Toughened glass cover. The fixture should be suitable
for pole/bracket mounting. The fixture to comply both
LM79 and LM 80 guidelines with LED minimum
lumen/watt with L70 at 50,000 hrs, provided with high
quality polycarbonate Seperate lenses for better light
distribution. The Fixture Should be able to be Pole
Mounted and also bracket mounted, provided with high
quality potted driver for protection against, high and low
Voltage cut Off, opertional for high amibient and high
humid envirnoments, THD of driver should be less than
10% and P.F > 0.95. Also the Fixture should meet the
following technical criterias. Operating range Voltage
160 to 270 V, system efficiency > 110 lm/w, CCT >
5000K, CRI >65, beam angle 120 deg, 4kV integral &
non integral surge immunity level at least 10 KV non
integral... Flood Light lumens shall be more than
(Note:- The manufacturer / authorized Channel partner
of the manufacturer has to submit 5yrs free replcement
Guarantee for complete Fixture) [Provision in estimate
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
124 supplying & erecting 40 W LED POST TOP LATTERN 6.00 Each 4772.00 Rupees Four Thousand
fitting with high power white LEDs wattage of 1 ww and Seven Hundred Seventy
above assebled on single MCPCB's effiency more than Two Only
130 lumens per watt and corrosion free high pressure
diecast alluminium housing with smooth finish powder
caoted and heat sink extruded alluminium with difuser
and poly carbonate optics/ lences with compny mark /
name /engraved or embossed 120 to 300 volt, power
factor more than 0.95, THD < 10%, CCT 5000K to
5700K , Uniformity ratio > 0.45, Luminure efficency Min
110 lumens per watt. LED Driver efficency > 85%.
Cree/osram/philips Lumileds/Nichia /Seoul/Bridge Lux
(USA) make LED used for luminare ( Each Fitting
required LM 79 and LM-80 certificates) (E)Post Top
Latern LED Fitting Comprises of 650 MM TOP
diameter 120 degree beam angle with 3 Nos supporting
ribs proposed for garden & Promenade. maximum
WATT, (Note:- The manufacturer/authorized Channel
partner of the manufacturer has to submit 5 yrs free
replcement Guarantee for complete Fixture)
125 Providing & erecting XLPE (IS:7098) (I)-88 ISI marked 780.00 Mtr. 269.00 Rupees Two Hundred
armoured Copper cable for 1100 volt to be laid 90 Sixty Nine Only
cms. Under ground or to be laid on wall with suitable
G.I. heavy guage 1.0 mm thick cable clamp or in
existing DWC pipe underground or road crossing or
floor of following size of cables. [a-1] For 4 core x
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
126 Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked 420.00 Mtr. 361.00 Rupees Three Hundred
armoured Copper cable for 1100 volt to be laid 90 cms. Sixty One Only
Under ground or to be laid on wall with suitable G.I.
heavy guage 1.0 mm thick cable clamp or in existing
DWC pipe underground or road crossing or floor of
following size of cables. [a-1] For 4 core x 4 sq.mm.
127 Supplying & Erecting following size of Light duty “A” 110.00 Mtr. 171.00 Rupees One Hundred
Class G.I. Pipe & erecting as directed by Engineer-in- Seventy One Only
charge. For 25 mm dia.
128 Providing & Erecting Flexible PVC insulated multistrand 350.00 Mtr. 46.00 Rupees Forty Six Only
multicore 1.1 kv grade ISI marked copper wires of
following size to be erected as directed. 3 core
sq.mm. PVC insulated round copper wire ISI mark.
129 Providing and Laying of Mains with ISI marked, 1.1 KV 230.00 Mtr. 56.00 Rupees Fifty Six Only
grade electrolyte multi stranded, annealed copper
conductor with heat resistant PVC insulated conforms
to IS:694, IEC - 227 erected in existing pipe of
following size (Specifically for control panel, relays,
power switchgears, motor starters & control wiring) with
required size of copper lugs, nuts and bolts if required.
[f] One wire 6.00 sq. mm
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
130 Providing and Laying of Mains with ISI marked, 1.1 KV 350.00 Mtr. 141.00 Rupees One Hundred
grade electrolyte multi stranded, annealed copper Forty One Only
conductor with heat resistant PVC insulated conforms
to IS:694, IEC - 227 erected in existing pipe of
following size (Specifically for control panel, relays,
power switchgears, motor starters & control wiring) with
required size of copper lugs, nuts and bolts if required.
[g] One wire 16.00 sq. mm
131 Providing & fixing double compressed heavy duty 160.00 Each 43.00 Rupees Forty Three Only
flange type brass cable gland with rubber ring for P V
C insulated armoured cable complete with outgoing
tails, insulating tape etc. For following size cables. For
to 4 core x 4.0 Sq. mm (Sigma, MCI, Commet Make
132 Supplying & erecting approved make SMC press 26.00 Each 1204.00 Rupees One Thousand
moulded composite FRP. loop-in, loop-out approx. Two Hundred Four Only
2mm thick box complete with Bakelite connector strip
5way(3P+N+E),DIN rail for mounting mob & hinged
doors as per requirement having locking arrangements
with mounting clamp with nuts, bolts & washers suitable
for erection on pole with cable clamps& earth bolt of
following size of box. (H) 300mm x 200mm x 135mm
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
133 Providing & erecting approved make street light / wall 13.00 Each 353.00 Rupees Three Hundred
mounting junction box compression moulded from SMC Fifty Three Only
(thermoset plastic) vertical sliding cover having locking
with square head stud loop in / loop out in built terminal
suitable for four core cable, waterproof of I.P.
protected with clamp or bolt nut & earth bolt of following
size. (A) 200mm x 127mm x 83 mm
134 Providing and Fixing Of Solderless crimping type 663.00 Each 8.00 Rupees Eight Only
Copper lugs conforming to IS suitable for cable of
following size evenly crimped with high pressure tool &
connected to switchgear terminals with brass/cadmium
plated nut bolts in an approved manner. [a] 1.5/2.5 to
135 Providing & laying HDPE Double walled corrugated 935.00 Mtr. 117.00 Rupees One Hundred
pipes (DWC) (conforming to IS: 16205 (part 24) 2018)) Seventeen Only
with minimum load required of 450N capacity with anti
rodent and ultra violet material properties with
necessary connecting accessories of same material at
required depth to be laid 90 cms. under ground for
laying of cable below ground / road surface for
enclosing cable and back filling the same to make
ground as per original. (A) For Outer dia. 50 mm and
Inner dia. 38 mm. ) (Test Certificate to be Submitted)
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
136 Providing & Erecting Universal Astro 5 KVA intelligent 5.00 Each 12895.00 Rupees Twelve Thousand
streetlight control system insu with weather proof box Eight Hundred Ninety Five
for outdoor application. (As per specification attached Only
separately) (Make and model approved by EIC)
137 Painting of street light pole with bracket complete 21.00 Each 263.00 Rupees Two Hundred
with two coats of Aluminium paint for following size of Sixty Three Only
pole.[b] up to 6 mtr.
138 Dismantling the existing pole up to 6 m height with 38.00 Each 183.00 Rupees One Hundred
brackets, clamps, insulators, stay from the cement Eighty Three Only
concrete foundation and making the site clear by
refilling the pits with excavated materials and bringing it
to the ground level.
139 Providing 1:2:4 cement concrete foundation & 70 % 21.00 Each 801.00 Rupees Eight Hundred
PCC from bottom including excavation for the pole of One Only
size 45 x 45 x 100 cm. Deep in below ground level with
plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high
upper ground level with necessary curing and finishing
in approved manner.
( for 4 & 6 mtr pole)
140 Drilling the road without breaking the road surface 60.00 Mtr. 488.00 Rupees Four Hundred
(Asphalt) for laying of cable for feeding power supply by Eighty Eight Only
making up to following size of holes at both ends
complete.(A) Up to 100 mm bore dia
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
141 Providing and erecting open well type horizontal 4.00 Each 18561.00 Rupees Eighteen
submersible mono block pump set with cast iron body Thousand Five Hundred
having following specification 3 phase open well Sixty One Only
horizontal mono block pump set suitable for
to1350 LPM discharge at required head as per
plumbing length and vertical & Horizontal head. Agency
has to submit the details calculation of head to
GSPHCL and get approval of make and model of pump
having tender specification with TDS & GA drawing.
Suitable for 50/65 mm dia delivery pipe with 10 mtr.
necessary Size 3 Core Flat copper flexible cable. (Body:
Cast iron / Winding : Copper / stator : Copper / rotor :
Copper / shaft : SS / Carbon material test certificate
from manufacture shall be submitted).
The model of the pump with respect to head and
discharge will be approved by EIC.
Pump should have following specifications:
(1) Minimum 10 mtr. Cu. flat cable of suitable size
must be provided with pump.
(2) Pump shall be installed as per manufacturer
foundation/erection drawing or as per IS
(Body full C.I., stator winding- copper, rotor- copper,
shaft- SS / carbon material, motor-Energy
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
142 Lifting or Lowering of existing submercible motor 8.00 Each 848.00 Rupees Eight Hundred
pump set complete with required No. and size of pipes Forty Eight Only
by means of proper chain pulley block and pipe
wrenches. Job includes stacking of pipes cronologically
after the checking of threads. [d] For open well
horizontal submercible pump set for sump well. (ii)
143 Supplying & erecting ISI Marked (Embossed) following 40.00 Mtr. 260.00 Rupees Two Hundred
size of “B” Class G.I . Pipe & erecting as directed by Sixty Only
Engineer-in-charge with necessary plumbing as
desired. [f] 50 mm dia.
144 Supplying and erecting ISI maked C.I. Sluice valve at 2.00 Each 796.00 Rupees Seven Hundred
position with necessary material like flange, packing, Ninety Six Only
nuts, washers etc. for following size of pipe diameter. [f]
145 Supplying and erecting C.I. Swing check type non- 6.00 Each 1010.00 Rupees One Thousand
return (reflux) valve ISI marked with packing, flange, Ten Only
nuts and bolts etc.suitable for following pipe size. [C]
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
146 Supplying and erecting approved make 5 HP DOL type 2.00 Each 47062.00 Rupees Forty Seven
motor control cubical panel made from 16 G. CRCA Thousand Sixty Two Only
sheet duly epoxy powder painted inside and outside
with hinged doors and locking arrangement Floor
Mounting On 300 mm Height with MS Stand Angle &
CC Foundation. Size 35 mm (H) x 35 mm (W) x 05 mm
(D). The detail specification & quantity of material used
Panel must be with minilec relay for auotmatic change
over for pump 1 & 2 logically without using manually
change over switch (Minimum Panel Size: 1.10 meter
(H) x 1.10 meter (W) x 0.25 meter (D).
INCOMMER SECTION: (1) MCCB-30 KA-FP (Ics =
100% Icu), Rating: 63 Amp., Make: LK, Qty: 01 No. (2)
Digital Ammeter (SR-65), Rating: 0-60 Amp., Make:
Schneider/LK, Qty: 01 No. (3) Ammeter Selector
Switch, Rating: 6 Amp., Rotary, Make: Salzer, Qty:
No. (4) Digital Voltmeter (SR-65), Rating: 0-500 V,
Make: Schneider/LK, Qty: 01 No. (5) Volt Selector
Switch, Rating: 6 Amp., Rotary, Make: Salzer, Qty:
No. (6) C.T.- Current Transformer, Rating: 60/5 Amp.,
Make: Virat, Qty: 03 Nos. (7) Indicating Lamps (R,Y,B),
Rating: 22.5 mm LED, Make: LK, Qty:03 Nos. (8) SP
MCB , Rating: 20 Amp., Make: LK, Qty: 03 Nos. (9)
Control Wiring, Rating: 1.0 Sq.mm, Make: Any ISI, Qty:
Lot (10) Copper Busbar, Rating: 63A/100 Amp., Qty:
Lot (11) Numeric logical relay, Qty: 1 No.
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
Outgoing Feeder (5 HP DOL Feeder): Qty: 02 Nos.
(1) MCB-FP-10 KA, Rating: 20 Amp., Make: LK, Qty:
Nos. (2) Power Contactor (415 V) Main, Rating:
Amp., Make: LK, Qty: 02 Nos. (3) Over Load Relay,
Rating: 9-15 Amp., Make: LK, Qty: 02 Nos. (4) Digital
Ameter (SR-65), Rating: 0-20 Amp., Make:
Schneider/LK, Qty: 02 Nos., (5) Digital Voltmeter (SR-
65), Rating: 0-500 V, Make: Schneider/LK, Qty: 02 Nos.
(6) Indicating Lamps (Start,Run,Trip), Rating: 22.5 mm
LED, Make: LK, Qty: 04 Nos. (7) Push Button
(Start,Stop), Rating: 22.5 mm, Make: LK, Qty: 02 Nos.
(8) SPP, Rating: 415 V, Make: Ellico, Qty: 02 Nos. (9)
Terminal, Rating: As per Amp., Make: LK, Qty: 04 Nos.
(10) Control Wiring, Rating: 1.0 Sq.mm., Make: Any ISI,
Qty: Lot (11) Power Wiring, Rating: As Per Amp., Make:
Any ISI, Qty: Lot
Outgoing Feeder (6 Amp. - 01 No.) For Capacitor (1)
MCB-FP-10 KA, Rating: 6 Amp., Make: LK, Qty: 01 No.
(2) Capacitor- MPP Type, Rating: 2 KVAr, Make:
Concap/Subodhan, Qty: 01 No., (3) Power wiring,
Rating: As Per Amp., Make: Any ISI, Qty:Lot
Outgoing Feeder (32 Amp. - 01 No.) For Lighting (1)
MCB-FP-10 KA, Rating: 32 Amp., Make: LK, Qty:
No. (2) Power wiring, Rating: As Per Amp. (3) Earthing
Strip: 25 x 3; G.I. Strip, Qty: 01 No. (4) MCB-DP-10KA
Rating: 20 A., Make: LK, Qty.:01 Nos.
Item Description Qty Unit Estimated Rates Amount
No. Figure Words
147 Supplying and erecting Water tight M.S.Box of size 20 4.00 Each 232.00 Rupees Two Hundred
x 15 x 15 cms. to erect suitable kitkat fuse / MCB to be Thirty Two Only
. erected on polished wooden board inside the box with
hinged/sliding door with rubber rings and erected on
pole with suitable pole clamp, all duly painted with one
coat of red oxide and two coats of paints. (Cost of Fuse
/ MCB shall be taken extra) [Provision for motors cable
joints near sump]
148 Providing and erecting ISI marked PVC insulated PVC 30.00 Mtr 145.00 Rupees One Hundred
Sheathed Flat flexible Submersible copper cable Forty Five Only
approved make of following Size. [c]3 Core x 4 Sq.
149 Providing & fixing water proof straight joint in PVC 4.00 Each 188.00 Rupees One Hundred
insulated flat flexible copper cable by using insulated Eighty Eight Only
material water proofing material and making the joint
complete. UP to 10 Sq.mm.
……………………… Exe. Engineer
Contractor Signature G. S. P. H. C. Ltd.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
1. SBD Book upto Section 4.pdf
2. Bank Details.pdf
3.All Conditions.pdf
4 Approved Material List 22-5-26.pdf
5 Tiles Company Selected Product List (26-5-26).pdf
6 List of approved material 26-05-26.pdf
7. SBD Book upto Section 5.pdf
8 Paraa Specification.pdf
9 Attached Specification SR Gir Somnath.pdf
10. SBD Book upto Section 6.pdf
11. SBD Book upto Section 7.pdf
13. SBD Book upto Section 8.pdf
14. SBD Book upto Section 9 10.pdf
New Jaher Nivida 2025-26 (02).pdf
Electrical Booklet 2024.pdf
Genral Techinal Specification.pdf
12 Sch-B.pdf
15 DTP condition SR to Gir Somnath.pdf
Download all tender documents and submit your bid