Construction of Mortuary Building in Civil Hospital at Ambala Cantt (Providing Internal E.I only) (Recall).

Amount

1: - ( c ) Moulded case Circuit breakers. Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. 15 amp.to 60 amp. 415 V ,10 KA 3-phase. 31.12 c (i)

: - 100 amp.to 220 amp.415 V,10 KA 3-phase. 31.12 c (ii)

2: - Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suiteble size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide. Size 40 mm x 40 mm x 6 mm. 31.13(ii)

3: - M.S.Sheet . Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide. 31.14 ( i )

5: - (L) Miniature Circuit Breaker and Isolator. Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. SP MCB of 9 KA breaking capacity 6 amp. to 32 amp. 31.17a) (ii)

: - SPN MCB of 9 KA breaking capacity 40 amp. 31.17(a) (ii)

: - TPN MCB of 9 KA breaking capacity 40 amp. to 63 amp. 31.17(a) (iii)

6: - (M) Supply and erection of Fittings and Accessories. Bakelite angle / straight button holder large size. 31.18 (xi)

: - Ceiling rose flush / surface type . 31.18 (xvii)

: - Erection only of 1x40 watts or 2x40 watts 1220 mm long / 1x20 watts or 2x20 watts ,610 mm long fluorescent tube fitting directly on wall including necessary connections with 0.75 sqmm ( 24 / 0.20 mm ) PVC copper flexible cable for connecting the tube with the adjecent point. 31.18 (xxiv)

: - Supply and erection of hexagonal M.S. box 1.60 mm thick having each side 8 cms , 7.5 cms deep top covered with M.S. lid by means of screws including 10 mm dia 30 cm long mild steel rod made into suitable suspension hook and erected in RCC slab for erection of fan , the bottom covered with 3 mm thick bakelite sheet with suitable holes , painting etc. complete with all labour and material required to complete the job. . 31.18 (xxvi)

7: - (O) Erection and carriage of fans.. Erection of ceiling fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to the site of work. 31.20 (i)

: - Erection of exhaust fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to the site of work. 31.20 (iii)

: - Making suitable hole in the wall upto 450 mm sweep exhaust fan including finishing the same and fixing of wire mesh duly fixed with Deodar wood frame of section 40 mm x 25 mm thick. 31.20 (v)

: - Pdg. and fixing of required size of deodar wood frame of section 50 mm x 32 mm for fixing exhaust fan upto 450 mm sweep. 31.20 (vi)

8: - (P) Pipe Laying. Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Heavy guage welded conduit pipe 20 mm dia 1.60 mm thickness flushed. 31.21 (xxi)

: - Heavy guage welded conduit pipe 25 mm dia 1.60 mm thickness flushed. 31.21 (xxii)

9: - (Q) Earthing Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required. 31.22(iii)

: - Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode. 31.22(v)

: - Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required . 31.22(xi)

: - Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required . 31.22(xii)

: - Pdg. and fixing 25 mm x 5 mm G.I. Strip on surface or in recess for connections etc. as required with all labour and material. 31.22(xv)

: - Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required . 31.22(xvi)

10: - Supply and erection of under ground cable 1 metre below ground level covered with sand and bricks including necessary connections, digging and refilling of trenches:- 95 sq mm 3 ½ Core cable 31.25 (xxix)

11: - Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . 10 sq mm 2 Core cable 31.26 (iv)

: - 35 Sq. mm 3.5 Core Armoured Cable. (xxvi)

: - 50 sq mm 3 ½ Core cable (xxvii)

: - 95 sq mm 3 ½ Core cable (xxix)

12: - Supply and erection of suitable compression type brass cable glands for underground Cable. 10 Sq mm to 16 Sq mm cable 2 to 4 Core 31.28 (i)

: - 25 Sq mm to 50 Sq mm cable 2 to 4 Core (ii)

: - 70 Sq mm to 95 Sq mm cable 3 to 3 ½ Core (iii)

13: - (X) Miscellaneous . Supply of M.S.pipe (B-Class) for suspension rod of ceiling fan including threading if required. 15 mm dia. 31.35 (i) (a)

: - Supply and erection of caution notice plate in three languages. 31.35 (iii)

: - Supply and erection of shock restoration chart in glass frame 31.35 (iv)

: - Supply and erection of cable route marker made of 50 cm long 10 mm dia M.S.rod welded / revitted at the top with 10 cm. Dia 5 mm thick G.I.plate inscribed with `cable' world on it , having a cross arm 30 cm. long of the same dia welded at the bottom , in existing trench 45 cm. below ground level . 31.35 (xi)

14: - (A) PVC Insulated wiring in recessed conduit. Wiring in 1.5 sq.mm PVC Insulated copper conductor cable in 1.6 mm thick conduit pipe. Fan Point - Medium . 31.36

: - Fan Point- Long. 31.36

: - Light point -Short. 31.36 (ii)

: - Light Point - Medium. 31.36

: - Light Point- Long. 31.36

: - Twin control light point with 2 way 5 amp. single pole switch- Short point. 31.36 (iii) a

: - Twin control light point with 2 way 5 amp. single pole switch- Medium point. 31.36 (iii) b

: - Twin control light point with 2 way 5 amp. single pole switch-Long point. 31.36 (iii) c

: - Call bell point including M.S Box of size 180mmx100mmx60mm deep for call bell - Long point 31.36 (vi) c

: - 3 pin 5 amp. plug point including earthing the 3rd. pin etc. -Short point. 31.36 (vii) a

: - 3 pin 5 amp plug point including earthing the 3rd. pin etc. - Medium point. 31.36 (vii) b

: - 3 pin 5 amp. plug point including earthing the 3rd. pin etc.- Long point. 31.36 (vii) c

: - 3 pin 15 amp.plug point including earthing the 3rd. pin etc. with 4 sq mm PVC insulated copper conductor cable- Medium point. 31.36 (viii) b

: - 3 pin 15 amp plug point including earthing the 3 rd. pin etc.with 4 sq mm PVC insulated copper conductor cable - Long point. 31.36 (viii) c

15: - Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe. Size 1.5 sqmm (3 / 0.81mm). 31.40 (i)

: - Size 2.50 sqmm (3 / 1.05mm). 31.40 (ii)

: - Size 4 sqmm (7 / 0.85mm). 31.40 (iii)

: - Size 6 sqmm ( 7 / 1.05mm). 31.40 (iv)

: - Size 10 sqmm 31.40 (v)

16: - Supply and erection of double door sheet steel enclosures distribution boards suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material requared complete the job in all respect upto the entire satisfaction of the Engineer-in Charge of the work. 12-way, SP & N (Horizontal) 31.41 (iii)

: - 4-way, TP & N (Horizontal) (8+12) 31.41 (iv)

: - 8-way, TP & N (Horizontal) (8+24) 31.41 (v)

17: - Supply and erection of PVC conduit pipe ISI marked (Medium) recessed in wall / ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect to the entire satisfaction of Engineer-in-Charge of work. 25 mm dia 31.44(b)

18: - Supply and erection of MS sadles and clamps on wall / RCC parapit for fixing underground cable at distance of 0.60 metre centre to centre fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect. 31.48

19: - Pdg. and fixing modular type accessories of approved make in existing box including fixing and making necessary connection, complete in all respect. 10 amp. 1 way switch 31.56 (i)

: - 10 amp. 2 way switch ( ii )

: - 20 amp. switch ( iii )

: - 10 amp. socket ( iv )

: - 16 amp. socket ( v )

: - Bell push ( vi )

: - Fan regulator ( vii )

: - Call bell Ding-Dong ( Monitca ) ( viii )

: - Blinking Plate ( ix )

20: - Pdg. and fixing GI concealed sheet metal boxes inner and outer faceplate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material requiered to complete the job in all respect. 1 & 2 module 31.57 ( i )

: - 3 Modules ( ii )

: - 4 Modules ( iii )

: - 6 Modules ( iv )

: - 8 Modules ( v )

: - 12 Modules ( vi )

21: - S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 Mtr. Below ground level including digging and refilling of earth including cost of suitable size socket / cuppler for HDPE pipe including cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in charge of work. HDPE 90/75 mm outer dia / inner dia 31.67 ( ii )