EXECUTION OF BUILDING WORK CONSISTING OF CIVIL, STRUCTURAL, ARCHITECTURAL, ELECTRICAL, SOLAR SYSTEM, FINISHING WORKS ETC. IN CONNECTION WITH BUILDING WORKS OF POLYPROPYLENE PROJECT-KOCHI OF BPCL

CIVIL WORK KOCHI

ELECTRICAL WORKS

MISCELLANEOUS CONTROL GEAR

Installation, testing and commissioning of miscellaneous surface mounted industrial/FLP control gear such as lighting/power panel, push button stations, motor starter, communication equipment, junction boxes, panels, plugs, sockets, including supply of necessary hardware, touch up painting including supply of paint, including transportation from store/yard to site at the place of installation, unpacking, (excluding fixing of cable glands and cable terminations), including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

Weight of the unit up to 5 kg.

Weight of the unit above 5 kg. but upto 20 kg.

Supply of Industrial, weather proof type Push Button stations as per EIL specification No. 6-51-0014, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

With start and stop (latching type) push buttons.

PLUGS, SOCKETS AND JUNCTION BOXES

Supply of weatherproof metal clad 415V, TPN, industrial type socket and plug with heavy duty interlocking switch, with adequately sized cable adaptor box for incoming and outgoing cable terminations, including supply of double compression brass nickel plated cable glands, tinned copper lugs, including all labours and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

63 A, 415 V, 5 pin sockets along with associated 5 pin plugs.

Supply of following types of FLP (II C) and WP sockets, plugs and handlamps as per EIL specification No. 6-51-0021, including all labours and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

240 V, 15 A, 3 pin socket.

240 V, 15 A, 3 pin Plugs for item no. 01EE.1060.30.70

Supply, installation, cable termination, connection, testing and commissioning of following types of FLP and WP junction boxes, as per EIL specification No. 6-51-0061, including all labours and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

FLP (II C) and WP 3 way JB complete with 3 Nos. FLP (II C) cable glands and 1 Nos. blocking plug suitable for cables upto 3 x 2.5 sq. mm YWY / XWY cable.

CANOPIES

Supply, fabrication and installation of GI canopies for outdoor electrical miscellaneous equipments such as lighting/power panels and distribution junction boxes, local panels , PB stations etc. to render them weather proof including supply of necessary hardware for fixing and clamping with the equipment, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

Lighting Panel/Power panel/distribution junctions boxes.

Push button stations.

ANCHOR FASTENERS

Supply, drilling in RCC and fixing of metallic anchor fasteners for supporting of cable trays and miscellaneous electrical switchgear of following sizes, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

SUPPLY OF MV CABLES

Supply of 1100 V grade, Copper Conductor,XLPE insulated and armoured, cables of following sizes as per EIL standard specification No. 6-51-0051, data sheets, specifications of this tender and directions of Engineer-in-Charge.

3 C x 2.5 sq. mm

Supply of 1100 V grade, Aluminium Conductor, XLPE insulated and armoured, cables of following sizes as per EIL standard specification No. 6-51-0051, data sheets, specifications of this tender and directions of Engineer-in-Charge.

3.5 C x 35 sq. mm

3.5 C x 50 sq. mm

LAYING OF CABLES

Laying of cables of different voltage grade and types of the following overall diameters in ready trays/trenches/ supported on structure/pull through pipes including supply and fixing of stainless steel strip number tags, supply and applying of fireproofing paint to meet OISD requirement (for 1m length near terminations), supply and fixing of GI saddles & saddle bars, trefoil clamps (for single core cables) etc., including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge

Cables with OD upto 20 mm.

Cables with OD above 20 mm but upto 30 mm.

END TERMINATIONS

Termination of XLPE insulated armoured power cables (up to 1100 V grade) and connection of leads excluding the supply of cable glands and lugs but including fixing of cable glands, supply and fixing of PVC shrouds for outdoor terminations, cutting and stripping of cable insulation, crimping the lug on to the conductor, clamping of the cable-cores, marking with wire number, ferrules etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

Cables with OD upto 20 mm.

Cables with OD above 20 mm but upto 30 mm.

Cables with OD above 30 mm but upto 40 mm.

G.I. & PVC PIPES

Supply and laying of following sizes of G.I. Pipes (medium) in required length fixed on steel, concrete or similar structure, laid in trenches, ready to be buried in concrete including cutting, threading, bending and similar works, supply of clamps, small iron structures, spacers and installation of seats, plugs, bushings etc., small civil works, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

Supply and laying of following sizes of PVC Pipes in required length fixed on steel, concrete or similar structure, laid in trenches, ready to be buried in concrete including cutting, threading, supply of bends and similar works, supply of clamps, small iron structures, spacers and installation of seats, plugs, bushings etc., small civil works, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

STRUCTURAL STEEL

Supply, fabrication and installation of MS base frames, supports for switchgear, and brackets for miscellaneous electrical equipments, cable and cable tray supports out of rolled MS sections, pipes, plates etc. including shot blasting, welding, bolting, riveting, supply of necessary anchor bolts and grouting etc., supply of paint and applying of anti-rust primer coat and finished coats of approved synthetic enamel paint as per Table-10 of specification 6-79-0020 suitable for highly corrosive environment, including breaking walls, floors etc. for structures as required including supply of all GI hardware materials, all labour and materials complete as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. (Any item weighing up to 1 kg. or less shall neither be measured nor paid).

Supply and installation of push button station supports complete with base plate, foundations bolts, grouting and painting(as per Table-10 of specification 6-79-0020 suitable for highly corrosive environment) etc., including all labour and materials, as per approved drawings and directions of Engineer-in-Charge.

As per std. 7-51-0307

CABLE - TRAYS

Supply and installation of prefabricated hot dip galvanised steel cable trays, fabricated out of hot rolled sheet steel with rigid welded construction ladder type with a rung as per std. 7-51-0333, of approved make and cable tray fittings, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

300 mm wide Straight run cable tray.

Horizontal bends for 300 mm wide tray with 1000 mm bending radius.

Vertical outside bends for 300 mm wide tray with 1000 mm bending radius

Vertical inside bends for 300 mm wide tray with 1000 mm bending radius

Supply and installation of following galvanised slotted channel trays of 2 mm thickness and 50 mm high for supporting cables, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

100 mm wide.

150 mm wide.

60 mm wide.

Supply, fabrication and installation of 0.91 mm (20 gauge) GI sheet covers for cable trays, including necessary hardwares, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

CABLE GLANDS

Supply of nickel-plated, flame proof IIA/IIB double compression type brass cable glands, suitable for out door terminations of armoured PVC cables of following overall diameter (excluding termination and connection of cables), including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

Cables with OD upto 20 mm.

Supply of nickel-plated, flame proof IIC double compression type brass cable glands, suitable for out door terminations of armoured PVC cables of following overall diameter (excluding termination and connection of cables), including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

Cables with OD upto 20 mm.

Supply of nickel plated brass single compression cable glands of following overall diameter (excluding termination and connections of cables), including drilling of suitable holes in equipments for fixing purposes etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

Cables with OD upto 20 mm.

Cables with OD above 20 mm but upto 30 mm.

Cables with OD above 30 mm but upto 40 mm.

CABLE LUGS

Supply of crimping type long barrel tinned copper lugs with circular/sector shaped barrel for following conductor sizes, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

All sizes upto 10 sq. mm

Supply of crimping type long barrel aluminium lugs with circular/sector shaped barrel for following conductor sizes, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

All sizes from 16 to 35 sq. mm

Supply of crimping type long barrel Bimetallic lugs with Al barrel & tinned Cu palm with circular/sector shaped barrel for following conductor sizes, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

All sizes from 16 to 35 sq. mm

All sizes from 50 to 185 sq. mm

Supply of crimping type long barrel Bimetallic lugs with tinned Cu barrel & Al palm with circular/sector shaped barrel for following conductor sizes, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

All sizes upto 10 sq. mm

All sizes from 16 to 35 sq. mm

HAZARDOUS AREA LIGHTING FIXTURES AND ACCESSORIES

Installation, connection, testing and commissioning of following types of flame proof/Div.2 lighting fixtures and accessories, including cable termination and connection, fixing of cable glands, lugs, including supply of necessary hardwares, including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

Well glass type bracket mounted.

Well glass type ceiling mounted.

Flood light fixtures.

3-way, junction box.

Tube light type, column/ceiling mounted

Supply of following FLP/Div.2 lighting fixtures complete with lamps, requisite FLP cable glands, plugs and necessary control gear as per EIL standard specification No. 6-51-0061, data sheet for lighting fixture schedule, including all albour and materials, specifications of this tender and directions of Engineer-in-Charge.

Type FLP IIC-10 Fixtures.

Type FLP-LED-1 Fixtures.

Supply and installation of Type-`A' clamps(for bracket mounted lighting fixtures) including bolt (MOC SS304) for fixing the fixture to the clamp as per EIL std.no.7-51-0221, including supply and fixing of anchor fasteners, nuts and bolts, washers etc. as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

Supply and installation of Type-`B' clamps(for ceiling mounted lighting fixtures) including bolt (MOC SS304) for fixing the fixture to the clamps per EIL std.no.7-51-0221, including supply and fixing of anchor fastners,nuts and bolts,washers as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

SAFE AREA LIGHTING FIXTURES

Supply, installation, testing and commissioning of following energy efficient lighting fixtures and connecting to wiring junction box/marshalling box complete with lamps and necessary control gear including supply of all connected materials like flexible conduit, clamps, supports, chains, anchor fastners, bolts, nuts and washers etc. as required, including supply and fixing of cable glands, lugs, including all labour and materials, as per approved drawings, data sheet for lighting fixture schedule, EIL installation standards, specifications of this tender and directions of Engineer-in-Charge.

Type LED 2 Fixtures.

Type LED 3 Fixtures.

Type LED IND-1 Fixtures.

Type LED IND-2 Fixtures.

Type LED RSD-10 Fixtures.

Type LED SFD-12 Fixtures.

Type LED LB-1 Fixtures.

Type LED HB-1 Fixtures.

Type LED BK-2 Fixtures.

Type LED ST-4 Fixtures.

Type LED FD-1 Fixtures.

FANS AND EXHAUST FANS

Supply, installation, connection, testing and commissioning of following types of exhaust fans including supply of all necessary supports etc., including fixing of cable glands, lugs with BEE(Bureau of Energy Efficiency) rating of minimum 3 star including all labour and materials and accessories like mounting frame, fixing bolt, wire guard/louvres etc., as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

300 mm dia., 1 phase, 900 rpm, wall mounting type epoxy painted exhaust fan with louvres.

450 mm dia., 1 phase, 900 rpm, wall mounting type epoxy painted exhaust fan with louvres.

450 mm dia., 1 phase, 900 rpm, wall mounting type epoxy painted exhaust fan with louvres suitable for Gas group IIC, temperature class T3.

Supply, installation, connection, testing and commissioning of 240 V AC, 1200 mm sweep ceiling fan with regulator (labeled as minimum 3-star by Bureau of Energy Efficiency)including providing clamp/hook in RCC slab, if necessary, providing, fixing, ceiling, rose, wiring, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

SOCKETS / RECEPTACLES AND SWITCHES / MCB UNITS

Supply, installation, connection, testing and commissioning of following ratings of 240 V, single phase, sockets/receptacles and metallic outlet boxes as described below including supply of all connected materials, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

6 A, 5 pin plate type flush/ surface mounting sockets/receptacles.

16/6 A, 6 pin plate type flush/ surface mounting sockets/receptacles.

20 A, 3 pin surface mounted industrial type switch socket with plug and sheet steel painted box.

Supply, installation, connection, testing and commissioning of following ratings of 240 V, single phase switches/MCB units, including outlet boxes and associated accessories, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

5 A, plate type flush/surface mounted switches.

15 A, plate type flush/surface mounted switches.

32A, DP MCB unit in moulded case enclosure for window / split type air conditioner.

JUNCTION BOXES (OUTDOOR / INDOOR TYPE)

Supply and installation of dust and vermin proof G.I. sheet steel (1.6 mm thick) junction box WP type suitable for outdoor/indoor installation with number of outgoing ways as under, complete with PVC connectors, supply and fixing of cable glands, including supply of required size and number of terminals, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

Supply and installation of dust and vermin proof G.I. sheet steel (1.6 mm thick) junction box suitable for indoor installation, complete with 15A, 20 terminals, supply and fixing of cable glands for incoming cable and knock outs for conduit entry for outgoing circuits, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

Junction box.

LIGHTING / POWER PANELS AND DISTRIBUTION BOARDS

Supply, installation, connection, testing and commissioning of safe area lighting/power panels, surface/flush mounting type, wall mounting type in dust tight (with hinged cover) sheet steel enclosure having 4 pole incomer and single pole MCB (9 kA type) for outgoing circuit control with complete wiring, including cable termination, connection and fixing of cable glands, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

40 A, 4 pole incomer MCB isolator and 06 Nos.outgoing single pole MCBs (upto 20A) and Type-A RCCB (Sensitivity-30 mA) including supply of cable glands and lugs

40 A, 4 pole incomer MCB isolator and 12 Nos.outgoing single pole MCBs (upto 20A) and Type-A RCCB (Sensitivity-30 mA) including supply of cable glands and lugs

63 A, 4 pole incomer MCB isolator and 18 Nos. outgoing single pole MCBs (upto 20A) and Type-A RCCB (Sensitivity -30 mA) including supply of cable glands and lugs

63 A, 4 pole incomer MCB isolator and 6 Nos. outgoing 32A single pole MCBs and Type-A RCCB (Sensitivity -30 mA) in each outgoing circuit including supply of cable glands and lugs

WIRING

Circuit wiring with 660 V grade, (sizes given below), FRLS PVC insulated copper wires in already laid surface/concealed conduit from lighting panel/power panel onwards including the supply of wires, termination and connection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

3 Nos x 1.5 sq. mm

3 Nos x 2.5 sq. mm

5 Nos x 1.5 sq. mm

5 Nos x 2.5 sq. mm

7 Nos x 1.5 sq. mm

7 Nos x 2.5 sq. mm

Supply and laying of (surface type) approved make of black enamelled steel conduit of following diameter and associated fittings from lighting/power panel, telephone, fire alarm/plant communication points etc., including supply of G.I. sheet steel junction boxes with acrylic cover, pull wire, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

25 mm diameter.

40 mm diameter.

Supply and installation of 50 mm x 50 mm, (18 SWG) 'METSEC' channel with removable cover, including supply of all connected hardware, supports, all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

Circuit wiring with 660 V grade (sizes given below) PVC insulated copper conductor wires in already installed metsec channel including the supply of wires, termination, connection and harnessing of wires etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

1.5 sq. mm wires.

2.5 sq. mm wires.

Supply and laying of (concealed type) PVC conduit of following diameter and associated fittings in brick walls, RCC slabs/ceilings for lighting/ power/telephone, fire alarm/plant communication points etc., including supply of G.I. sheet steel junction boxes with acrylic cover, pull wire, making cuts and chasis in built up brick work, RCC slabs/ceilings and making good the same, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

25 mm diameter.

40 mm diameter.

Circuit wiring in non-hazardous areas using (size given below), copper conductor, XLPE insulated, FRLS outer sleeve cables (third core for earthing), from lighting/power panel/distribution junction box, excluding the supply of cable, junction boxes and cable glands but including termination and connection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

3 C x 2.5 sq. mm

Circuit wiring in hazardous areas using (sizes given below) copper conductor, XLPE insulated, FRLS outer sleeve armoured cables (third core for earthing) from lighting/power panel/distribution junction box onwards, excluding the supply of cables, junction boxes and cable glands but including fixing of cable glands, supply and fixing of clamps, cable terminations and connections, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

3 C x 2.5 sq. mm

EMERGENCY LIGHTING

Supply, installation, connection, testing and commissioning of emergency lighting unit (min. 5W, 100 lumens output) fed by a self- contained battery rated for 2 hours and charger operating on 240 V AC supply, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

EARTH ELECTRODES

Supply, installation, testing and commissioning of GI earth electrodes, complete with earth pit as per std. 7-51-0102 and all necessary materials including excavation of earth pit, filling with charcoal and salt, back filling, providing necessary brickwork, connections, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

GI earth electrode as per std. 7-51-0102.

EARTH STRIPS

Supply, installation and connection of following GI earthing strip along the cable trenches or cable trays or fixing to walls or structures including welding at joints, providing anti-corrosive paint or bitumen and jute covering for welded portion, clamping and necessary hardware for connecting, etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

Supply, installation and connection of following GI earthing strip buried individually at a depth of 500 mm including welding at joints, providing anti-corrosive paint or bitumen and jute covering for welded portion, clamping and necessary hardware for connecting, excavation and refilling etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

EARTHING CONNECTION

Connecting individual equipment to the earth strip or earth plate with following sizes of G.I. wire / G.I. wire rope including the supply of G.I. wire /G.I. wire rope, lugs, conductors, connecting to the G.I. strip or earth plate and necessary hardware for connection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

3/8" dia (10 mm) flexible rope.

5/8" dia (16 mm) flexible rope.

8 SWG GI Wire.

EARTH PLATES

Supply, installation and connection of GI earth plates as per std. 7-51-0103, complete with anchor bolts, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

GI earth plate as per std. 7-51-0103.

EARTHING CABLES

Supply of 1100 V grade, multi stranded Aluminium Conductor, PVC insulated and unarmoured cables (with green/yellow strips or green colour outer sleeve) of following sizes as per EIL standard specification No. 6-51-0051, data sheet, specifications of this tender and directions of Engineer-in-Charge.

1 C x 10 Sqmm

1 C x 25 Sqmm

Termination & connection of leads of 1100 V grade, multi stranded Aluminium Conductor, PVC insulated and unarmoured, cables of following sizes for earthing of equipment, including supply of lugs, supply and fixing of GI saddles and saddle bars, cutting and stripping of cable insulation, crimping the lug on to the conductor, clamping of the cable, including all labour and materials as per approved drawings, specifications of this tender and directions of Engineer-in-Charge

1 C x 10 Sqmm

1 C x 25 Sqmm

PLANT COMMUNICATION SYSTEM

Installation, termination and connection of following plant communication system (including back up battery bank, battery charger etc.), including transportation from store/yard to site at the place of installation, assembling and installing in foundation or fixing to wall/structure, aligning, levelling, grouting, cable termination, wiring and all inter-connection and making earth connection etc., first charging of battery, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

Central Exchange Panel along with associated battery, battery charger.

Desk type intercom station upto 24 keys.

Desk type intercom station with above 24 and upto 54 Keys.

Weather Proof Intercom station with upto 3 Nos dual position Keys (FLP/Industrial type).

Weather proof loudspeakers (FLP/Industrial Type).

Desk type intercom station with above 54 and upto 128 Keys.

Supply of weatherproof type plant communication junction box (PAJB) suitable for outdoor installation with Krone/screw type terminals, including supply of weatherproof double compression cable glands and weatherproof plugs to block the unused entry including all labour and materials, as per specifications of this tender and direction of Engineer-in-Charge.

PAJB with 1 nos 20 Pair incoming cable(s) and 4 nos 5 Pair outgoing cable(s)

PAJB with 1 nos 50 Pair incoming cable(s) and 10 nos 5 Pair outgoing cable(s)

Installation, testing and commissioning of weatherproof type plant communication junction box (PAJB) suitable for outdoor installation with Krone/screw type terminals, including termination and connections of incoming and outgoing non-jelly cable, excluding supply of weatherproof double compression cable glands, including all labour and materials, as per specifications of this tender and direction of Engineer-in-Charge.

PAJB with 1 nos 20 Pair incoming cable(s) and 4 nos 5 Pair outgoing cable(s)

PAJB with 1 nos 50 Pair incoming cable(s) and 10 nos 5 Pair outgoing cable(s)

TELEPHONE SYSTEM

Supply, installation, testing and commissioning of Indoor Telephone Distribution J.B. made out of 2.03 mm (14 gauge) sheet steel, with one anti-rust coat of primer, with two finished coats of approved epoxy paint, with Krone type terminals with hinged lockable door, detachable gland plate at the bottom/top complete with termination and connections of incoming/ outgoing cables, including all labour and materials, as per specifications of this tender and directions of Engineer-in-Charge.

TDJB Surface mounting type, suitable for 1 nos 20 Pair incoming cable(s) and 10 nos 2 Pair outgoing cable(s)

TDJB Surface mounting type, suitable for 1 nos 10 Pair incoming cable(s) and 10 nos 1 Pair outgoing cable(s)

TDJB Surface mounting type, suitable for 3 nos 50 Pair incoming cable(s) and 15 nos 20 Pair outgoing cable(s)

Supply, installation, connection, testing and commissioning of following plug - in type sockets for Telephones extensions including supply of sheet boxes with covers connection of socket and plug, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

Flush Mounting Type.

Wiring with (No. of wires given below) 660 V grade, 0.63 mm dia. annealed tinned copper conductor, PVC insulated twin flat wire as per relevant IS in already laid surface/concealed conduit from TDJB onwards to telephone sockets including supply of Wires, termination and connection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

1 No. twin flat wire.

2 Nos. twin flat wires.

3 Nos. twin flat wires.

5 Nos. twin flat wires.

FIRE ALARM SYSTEM

Installation, termination and connection of following fire alarm panel including Power Pack and battery backup system and all associated items, including transportation from store/yard to site at the place of installation, assembling and installation on foundation or fixing to wall or steel structures, aligning, levelling, grouting, termination and connection of cables, making earth connections etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

Zener Barrier

Fire alarm panel.

Zonal/Repeat fire alarm panels.

Heat detectors.

Break glass type fire alarm boxes.

Exit signs.

Hooters.

Sirens with starters.

Multi sensor type detectors

Fault Isolator modules

Input/Monitoring relay module

Output/Control Relay Module

Hooter Acknowledge Box

Supply of weatherproof type fire alarm junction box (FAJB) suitable for outdoor installation with Krone/screw type terminals, including supply of weatherproof double compression cable glands and weatherproof plugs to block the unused entry including all labour and materials, as per specifications of this tender and direction of Engineer-in-Charge.

FAJB with 6 nos 2 Pair incoming cable(s) and 6 nos 2 Pair outgoing cable(s)

FAJB with 4 nos 2 Pair incoming cable(s) and 4 nos 2 Pair outgoing cable(s)

FAJB with 3 nos 10 Pair incoming cable(s) and 15 nos 2 Pair outgoing cable(s)

Installation, testing and commissioning of weatherproof type fire alarm junction box (FAJB) suitable for outdoor installation with Krone/screw type terminals, including termination and connections of incoming and outgoing non-jelly cable, excluding supply of weatherproof double compression cable glands, including all labour and materials, as per specifications of this tender and direction of Engineer-in-Charge.

FAJB with 6 nos 2 Pair incoming cable(s) and 6 nos 2 Pair outgoing cable(s)

FAJB with 4 nos 2 Pair incoming cable(s) and 4 nos 2 Pair outgoing cable(s)

FAJB with 3 nos 10 Pair incoming cable(s) and 15 nos 2 Pair outgoing cable(s)

LAYING OF COMMUNICATION / FIRE ALARM CABLES

Horizontal and vertical laying/pulling through of communication/fire alarm cables of the following overall diameters in ready trays/trenches/conduits or supported on structures including supplying and fixing of GI saddle and saddle bars, stainless steel strip number tags, including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge

Cables of overall dia. upto 35 mm.

CIVIL WORKS/M.S. CHEQUERED PLATE

Supply, fabrication and installation of 6 mm thick M.S. chequered plate for covering floor cut- outs/cable trenches etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

6 mm thick M.S. chequered plate.

Making through and through cut outs in pockets of following shape and size in the RCC floor/ walls of trenches/ buildings of thickness above 200 mm and upto 400 mm for facilitating cable/ duct entries, using concrete cutting machines and making cut out good using plastering and painting including all material and labour as per approved drawings, specification of this tender and directions of Engineer-in-charge.

Rectangular Cut Out of length 200 mm width 200 mm

LAN SYSTEMS

Supply, installation, connection, testing and commissioning of weatherproof power panels for UPS power distribution having following incomer & outgoing feeders, including all labour and materials, as per approved drawings, specifications of this tender and directions of engineer-in-charge.

32A, double pole incomer MCB isolator and 6 nos outgoing double pole 10A MCBs isolator with 2nos, 10A semiconducting fuses.

32A, double pole incomer MCB isolator and 12 nos outgoing double pole 10A MCBs isolator with 2 nos, 10A semiconducting fuses ,

63A, double pole incomer MCB isolator and 18 nos outgoing double pole 10A MCBs isolator with 2 nos, 10A semiconducting fuses

Supply, installation, connection, testing and commissioning of following ratings of 240 V, single phase, sockets/receptacles/switches as described below including all connected materials, outlet boxes and associated accessories including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

3 nos 6 A, 5 pin plate type flush/ surface mounting sockets/receptacles with 1 Nos 15 A, plate type flush/surface mounted switches.

PAINTING & MARKING

Letter painting of tag nos., applicable circuit nos. for identification with red/black/white paint for all outdoor equipment in safe and hazardous areas viz. light fittings, control gear boxes, lighting/power panels, welding receptacles, convenience receptacles, local control stations, fire alarm manual call points, fire alarm detectors, motors, field call stations, loud speakers, etc. including supply of enamel paint, all hardware as required, supply of all labour, materials as per the specification of this tender and directions of Engineer-in-Charge.

Each alphabet/character upto 2 inch in height/length

Each alphabet/character above 2 inch and Upto 4 inch in height/length

Each alphabet/character above 4 inch and Upto 8 inch in height/length

Supply of 1100 V grade, Copper Conductor, Overall shielded, twisted pair/triad, XLPE insulated, Armored, FRLS outer-sheathed cables of following sizes as per EIL standard specification No. 6-51-0052, data sheets, specifications of this tender and directions of Engineer-in-Charge.

2 pair x 1.5 sq.mm

5 pair x 0.9 mm dia.

Supply of 1100 V grade, Copper Conductor, Overall shielded, twisted pair/triad, XLPE insulated, Unarmored, FRLS outer-sheathed cables of following sizes as per EIL standard specification No. 6-51-0052, data sheets, specifications of this tender and directions of Engineer-in-Charge.

2 pair x 1.5 sq.mm

5 pair x 0.9 mm dia.

ROOFTOP SOLAR PHOTOVOLTAIC SYSTEM

Design, Engineering, Supply of grid connected rooftop solar photovoltaic power system with minimum generation output of minimum 20 kWp at the point of common coupling with Owners switch board. Supplied solar system shall comprise but not limited to solar PV modules including mounting frames, structures, array foundation, module inter connection etc, Array Junction boxes, Main Junction boxes and Fuse boxes / circuit breakers, Power Conditioning Units (PCU), AC power evacuation panels with bus bars and circuit breakers, Metering and protection / Isolation systems, MV Power and Control Cables including end terminations, cable trays, supports & accessories, Galvanized steel conduits & accessories, PVC pipes, ferrules, lugs, glands, terminal blocks, galvanized sheet steel junction boxes, cable fixing clamps, nuts and bolts, Steel materials for field fabrication etc, other accessories for both AC & DC power as required for interconnection between contractor supplied equipment, Earthing system for PV Array, DC power system, AC power system equipment, PCU etc., Lightning protection system, Data acquisition and monitoring system with remote monitoring facilities etc. as per EIL standard specification No. 6-51-0022 including all labour and materials, as per approved drawings, specifications, drawings of this tender and directions of Engineer-in Charge.

Installation, Testing and commissioning of grid connected rooftop solar photovoltaic power system as per complete MR item 01EE.MD03.01 including Earthing system, Lightning protection system, configuration of Data acquisition and monitoring system with remote monitoring facilities etc and laying and termination of cable within all equipments supplied as a part of this solar system and from PCU/AC Power evacuation panel to 415V Main distribution board in admin building and all other items as per EIL standard specification No. 6-51-0022 including all labour and materials, as per approved drawings, specifications, drawings of this tender and directions of Engineerin-Charge.

Design, Engineering, Supply of grid connected rooftop solar photovoltaic power system with minimum generation output of minimum 95 kWp at the point of common coupling with Owners switch board in N2 Substation JU1/SRR-12. Supplied solar system shall comprise but not limited to solar PV modules including mounting frames, structures, array foundation, module inter connection etc, Array Junction boxes, Main Junction boxes and Fuse boxes / circuit breakers, Power Conditioning Units (PCU), AC power evacuation panels with bus bars and circuit breakers, Metering and protection / Isolation systems, MV Power and Control Cables including end terminations, cable trays, supports & accessories, Galvanized steel conduits & accessories, PVC pipes, ferrules, lugs, glands, terminal blocks, galvanized sheet steel junction boxes, cable fixing clamps, nuts and bolts, Steel materials for field fabrication etc, other accessories for both AC & DC power as required for interconnection between contractor supplied equipment, Earthing system for PV Array, DC power system, AC power system equipment, PCU etc., Lightning protection system, Data acquisition and monitoring system with remote monitoring facilities etc. as per EIL standard specification No. 6-51-0022 including all labour and materials, as per approved drawings, specifications, drawings of this tender and directions of Engineer-in Charge.

Installation, Testing and commissioning of grid connected rooftop solar photovoltaic power system as per complete MR item 01EE.MD03.03 including Earthing system, Lightning protection system, configuration of Data acquisition and monitoring system with remote monitoring facilities etc and laying and termination of cable within all equipments supplied as a part of this solar system and from PCU/AC Power evacuation panel to 415V Main distribution board in admin building and all other items as per EIL standard specification No. 6-51-0022 including all labour and materials, as per approved drawings, specifications, drawings of this tender and directions of Engineerin-Charge.

Supply, installation, connection, testing and commissioning of safe area MCB Box

Supply, installation, connection, testing and commissioning of safe area MCB Box surface/flush mounted type, wall mounting type (with hinged cover) sheet steel enclosure with canopy having 4 nos. single pole MCBs (9kA type, upto 20 A) with complete wiring, suitable for outdoor, IP 55 weatherproof, including cable termination, connection and fixing of cable glands (for 4 nos. incoming and 4 nos. outgoing, 3C X 2.5 sqmm. armoured cables), including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineeer-in-Charge.

OCCUPANCY SENSOR

Supply, Installation, testing and commissioning of Passive Infrared (PIR) technology based non-regulating programmable type Occupancy sensor having high performance, suitable for connected load up to 10 Amp, for mounting heights up to 4 meter and for 4 meter diameter coverage area along with necessary junction box, wiring, fixing arrangements, and supply of all connected materials, including programming at site, complete with all labor and material as required.

INFORMATION TECHNOLOGY SERVICES

Supply, installation, testing and commissioning of WIFI System including all labour and materials, including following items as per approved drawings, specifications of this tender and directions of engineer-in-charge:

WIFI Indoor AP

Structured UTP LAN CABLING

Supply, installation, testing (Penta Scanning) and commissioning of Structured UTP LAN Cabling including all labour and materials (Cable, Conduit, Channel), including following items as per approved drawings, specifications of this tender and directions of engineer-in-charge:

CAT-6A LSZH-FR

24-port CAT-6A Jack Panel (fully loaded with 24 Nos. I/Os)

48-port CAT-6A Jack Panel (fully loaded with 48 Nos. I/Os)

1-m long CAT-6A Patch Cord

2-m long CAT-6A Patch Cord

CAT-6A I/O, Faceplates, Gang-box

Structured OFC Cabling

Supply, installation, testing and commissioning of Structured OFC Cabling including all labour and materials including following items as per approved drawings, specifications of this tender and directions of engineer-in-charge.

OFC - 6-Core, Single-mode, LSZH, Indoor/Outdoor, Armoured

OFC - 48-Core, Single-mode, LSZH, Indoor/Outdoor, Armoured

Supply, installation, testing and commissioning of Fiber Optic Patch Panel including all accessories for terminating, Pigtails with Connectors, splicing sleeves and splice tray including all labour and materials, as per approved drawings, specifications of this tender and directions of engineer in Charge

Fiber Optic Patch Panel

No. of Cores 12 nos Mode Single-Mode

No. of Cores 48 nos Mode Single-Mode

Supply, Installation of LSZH Patch Cord as per the specifications of this tender and directions of the Engineer-in-Charge.

Fiber Optic Patch cord

Type LC-LC Mode Single-Mode

Supply, Installation, Laying of pre-lubricated HDPE conduits by direct burial / through cable trays / through ducts / through already available RCC Trench including civil work like weeding out vegetation, excavation upto 1m, conduit laying, pressing and backfilling of soil etc. and laying of OFC in HDPE as per the specifications of this tender and directions of the Engineer-in-Charge

Pre lubricated HDPE

Supply, installation of OFC joint pits as per the specifications of this tender and directions of the Engineer-in-Charge

OFC Joint Pits

Supply, installation of OFC Building Distribution Enclosure as per the specifications of this tender and directions of the Engineer-in-Charge

OFC Building Distribution Enclosure

Equipment Rack - Networking, Server

Supply, installation, testing and commissioning of Network Racks including all labour and materials (including Horizontal and Vertical Cable Managers) of varying sizes, as per approved drawings, specifications of this tender and directions of engineer-in-charge.

Floor-standing Network Rack

Height 27 u Width 19 Inch

Wall-mounted Network Rack

Height 15 u Width 19 Inch

Supply and Laying of PVC conduits pipe

Supply and Laying of PVC conduits as per the specifications of this tender and directions of the Engineer-in-Charge.

Supply and Laying of PVC conduits of sizes OD 32 mm

Supply and Laying of PVC channels

Supply and Laying of PVC channels as per the specifications of this tender and directions of the Engineer-in-Charge.

Supply and Laying of PVC channels of size OD 25 mm as per the specifications of this tender and directions of the Engineer-in-Charge.

Network Active Components

Supply, installation, mounting, testing and commissioning of Ethernet Distribution Switch(s) including all labour and materials, as per approved drawings, specifications of this tender and directions of engineer in charge

No. of Fiber Ports 24 nos

Supply, installation, mounting, testing and commissioning of Ethernet Edge Switch(s) including all labour and materials, as per approved drawings, specifications of this tender and directions of engineer in charge

POE Ethernet Switch

Total No. of Gigabit UTP Ports 24 No. of POE Ports 24 No. of Fiber Ports 4

Total No. of Gigabit UTP Ports 48 No. of POE Ports 48 No. of Fiber Ports 4

Supply, installation, mounting, testing and commissioning of 10G SFP+ LR including all labour and materials, as per approved drawings, specifications of this tender and directions of engineer in charge

10G SFP+ LR upto 10 Km

Supply and Installation of EOT Crane (Capacity = 5.0MT) Design, engineering, procurement of raw materials and bought out components, manufacturing, fabrication, assembly at shop, inspection, testing at manufacturer's works, shop painting (primer + finish coat), packing and delivery including supply of all commissioning spares, mandatory spares, special tools and tackles as applicable, lubricants, LT/CT Rail for EOT Crane including all auxiliaries, etc., transportation from vendor's works to site, unloading at site, handling, transportation to contractor's store and from contractor's store to work site, storage at site, fabrication/assembly at site, installation and other field works including electrical, civil-structural work complete in all respect, hook up, testing, site painting, pre-commissioning, commissioning, performance guarantee run test at site, handing over to client, onsite training at project site to Owners personnel for operation & maintenance, preparation and submission of drawings & documents as per the enclosed Scope of Supply/Works (Static & Machinery Equipment, Doc. No. B895-999-80-42-SOW-8201), Job Specification (Static & Machinery Equipment, Doc. No. B895-999-80-42-SP-8201) for Building Works and other documents referred therein and instruction of engineer-incharge for each equipment including accessories

EOT crane of 5.0MT capacity for DG SHED Building

STRUCTURAL

EARTH WORK (REFER SPECIFICATION NO. 6-68-0003)

Earthwork excavation in soil

Earth work in EXCAVATION below ground level for all kinds of works in ALL TYPES OF SOILS EXCEPT SOFT ROCK AND HARD ROCK as classified in specification for a depth upto 1.5m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete, but excluding shoring and strutting.

Earth work in EXCAVATION below ground level for all kinds of works in ALL TYPES OF SOILS EXCEPT SOFT ROCK AND HARD ROCK as classified in specification for a depth beyond 1.5m and upto and inclusive of 3.0m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete, but excluding shoring and strutting.

Earth work in EXCAVATION below ground level for all kinds of works in ALL TYPES OF SOILS EXCEPT SOFT ROCK AND HARD ROCK as classified in specification for a depth beyond 3.0m and upto & inclusive of 4.5m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete, but excluding shoring and strutting.

Earthwork excavation in soft rock

Earth work in EXCAVATION below ground level for all kinds of works in SOFT ROCK as classified in specification for a depth upto 1.5m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete, but excluding shoring and strutting.

Earth work in EXCAVATION below ground level for all kinds of works in SOFT ROCK as classified in specification for a depth beyond 1.5m and upto & inclusive of 3.0m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete, but excluding shoring and strutting.

Earth work in EXCAVATION below ground level for all kinds of works in SOFT ROCK as classified in specification for a depth beyond 3.0m and upto & inclusive of 4.5m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete, but excluding shoring and strutting.

Earthwork excavation by controlled blasting (Explosive/ Non-explosive)

Earthwork in EXCAVATION below ground level for all kinds of works by Non- Explosive Blasting methods in Hard Rocks, for a depth of 1.5m including all related work for non-explosive blasting such as drilling, supplying, storage, mixing & filling of drilled holes with non-explosive demolition agents/ blasting chemicals making necessary safety measures around the area, chiselling & cutting to required levels, dressing & trimming of sides, levelling & grading of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works & disposal of spoils to spoil heaps and stacking of usable excavated materials within a lead of 100m etc. as directed including providing temporary support to existing structures, service lines like water pipes, sewage pipes, electric overhead and underground cable etc. all complete.

Earthwork in EXCAVATION below ground level for all kinds of works by Non- Explosive Blasting methods in Hard Rocks, for a depth beyond 1.5m and upto & inclusive of 3.0m including all related work for non-explosive blasting such as drilling, supplying, storage, mixing & filling of drilled holes with non-explosive demolition agents/ blasting chemicals making necessary safety measures around the area, chiselling & cutting to required levels, dressing & trimming of sides, levelling & grading of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works & disposal of spoils to spoil heaps and stacking of usable excavated materials within a lead of 100m etc. as directed including providing temporary support to existing structures, service lines like water pipes, sewage pipes, electric overhead and underground cable etc. all complete.

Earthwork in EXCAVATION below ground level for all kinds of works by Non- Explosive Blasting methods in Hard Rocks, for a depth beyond 3.0m and upto & inclusive of 4.5m including all related work for non-explosive blasting such as drilling, supplying, storage, mixing & filling of drilled holes with non-explosive demolition agents/ blasting chemicals making necessary safety measures around the area, chiselling & cutting to required levels, dressing & trimming of sides, levelling & grading of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works & disposal of spoils to spoil heaps and stacking of usable excavated materials within a lead of 100m etc. as directed including providing temporary support to existing structures, service lines like water pipes, sewage pipes, electric overhead and underground cable etc. all complete.

SHORING AND STRUTTING

Providing and installing approved type of "SHORING AND STRUTTING" by open timbering method for all depths to retain earth including dismantling and removal of the same etc. from site after completion of work etc. all complete as directed.

Providing and installing approved type of "SHORING AND STRUTTING" by close timbering method for all depths to retain earth including dismantling and removal of the same etc. from site after completion of work etc. all complete as directed.

Backfilling after execution of work

Transporting & Disposing the SURPLUS EARTH AND DEBRIS

Transporting and disposing the SURPLUS EARTH AND DEBRIS including shrubs and vegetations from construction area beyond the initial LEAD OF 100M AND UPTO 1KM including re-excavating the deposited soil excavated earlier, transportation, loading, unloading, laying at all depths and heights, stacking, levelling and dressing both the area (viz. from where the earth is transported and where it is deposited) to required levels and slopes complete with all lifts as directed. For carting on the basis of truck measurements (volume of truck reduced by 30% for voids).

Transporting and disposing the SURPLUS EARTH AND DEBRIS including shrubs and vegetations from construction area beyond the initial LEAD OF 1.0KM AND UPTO & INCLUSIVE OF 3.0KM including re-excavating the deposited soil excavated earlier, transportation, loading, unloading, laying at all depths and heights, stacking, levelling and dressing both the area (viz. from where the earth is transported and where it is deposited) to required levels and slopes complete with all lifts as directed. For carting on the basis of truck measurements (volume of truck reduced by 30% for voids).

Transporting and disposing the SURPLUS EARTH AND DEBRIS including shrubs and vegetations from construction area beyond the initial LEAD OF 3.0KM AND UPTO & INCLUSIVE OF 5.0KM including re-excavating the deposited soil excavated earlier, transportation, loading, unloading, laying at all depths and heights, stacking, levelling and dressing both the area (viz. from where the earth is transported and where it is deposited) to required levels and slopes complete with all lifts as directed. For carting on the basis of truck measurements (volume of truck reduced by 30% for voids).

Transporting and disposing the SURPLUS EARTH AND DEBRIS including shrubs and vegetations from construction area beyond the initial LEAD OF 5.0 KM AND UPTO ANYWHERE within the plant boundary including re-excavating the deposited soil excavated earlier, loading, transportation, unloading, laying at all depths and heights, stacking, levelling and dressing both the area (viz. from where the earth is transported and where it is deposited) to required levels and slopes complete with all lifts as directed. For carting on the basis of truck measurements (volume of truck reduced by 30% for voids).

PLAIN & REINFORCED CEMENT CONCRETE: (REFER SPECIFICATION NO. 6-68-0004)

PCC - Non FIM Items

Providing and laying PLAIN CEMENT CONCRETE for all depths below and upto plinth level in foundations, drains, fillings, non-suspended floors, pavements & ramps or any other works etc. including shuttering, tamping, ramming, vibrating, curing etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete of nominal mix 1:5:10 by mass (1 Cement: 5 Coarse Sand: 10 Crushed Stone Aggregates/Gravels) with 40mm and down size graded crushed stone aggregates/Gravels. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR.

Providing and laying PLAIN CEMENT CONCRETE for all depths below and upto plinth level in foundations, drains, fillings, non-suspended floors, pavements & ramps or any other works etc. including shuttering, tamping, ramming, vibrating, curing, shuttering etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete of nominal mix 1:4:8 by mass (1 Cement: 4 Coarse Sand: 8 Crushed Stone Aggregates/Gravels) with 40mm and down size graded crushed stone aggregates/Gravels. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR.

Providing and laying PLAIN CEMENT CONCRETE of nominal mix 1:3:6 by mass (1 Cement : 3 Sand : 6 Crushed Stone Aggregates) with 10mm and down size graded crushed stone aggregates below and upto plinth level as SCREED in trenches, floor slabs, sumps, channels, drains etc. for all depths including shuttering, tamping, curing etc. as specified in any shape, level, thickness, position and finishing the top surface smooth etc. all complete as directed. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR.

Providing and laying PLAIN CEMENT CONCRETE of nominal mix 1:3:6 by mass (1 Cement : 3 Sand : 6 Crushed Stone Aggregates) with 10mm and down size graded crushed stone aggregates above plinth level as SCREED in floor slabs, roofs, chajjas, canopies, gutters etc. for all heights including shuttering, tamping, curing etc. as specified in any shape, level, thickness, position and finishing the top surface smooth etc. all complete as directed. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR.

Providing and laying PLAIN CEMENT CONCRETE for all depths below and upto plinth level in foundations, drains, fillings, non-suspended floors, pavements & ramps or any other works etc. including shuttering, tamping, ramming, vibrating, curing, etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete grade M20 with 20mm and down size graded crushed stone aggregates/Gravels. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR.

RCC Substrutures - Non FIM Items

Providing and laying REINFORCED CEMENT CONCRETE OF M-30 GRADE with 20 mm and down size graded crushed stone aggregates/ gravel in SUB-STRUCTURE e.g. foundations, raft, beams, slabs, pile caps, retaining walls, dyke walls, jambs, counterforts, buttresses, pedestals, pipe sleepers, columns, suspended floors, staircases, landings, steps, brackets etc., including equipment/ machine foundations & pedestals viz. compressors, ID & FD fans, pumps, generators, crushers, mills, etc., (including single pour concreting as specified on the drawing), applying cement wash on concrete surface (wherever no other surface application is specified), providing pockets, openings, recesses, chamfering, etc., wherever required, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc. (EXCLUDING THE COST OF REINFORCEMENT, SHUTTERING & SPECIFIED ADMIXTURES) for all depths below and upto plinth level in any shape, position and thickness etc. all complete as specified, shown and directed. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR.

Providing and laying REINFORCED CEMENT CONCRETE OF M-30 GRADE with 20 mm and down size graded crushed stone aggregates/ gravel in SUB-STRUCTURE e.g. trenches, culverts, manholes, pipe encasement, catchpits, drains, pits, etc., applying cement wash on concrete surface (wherever no other surface application is specified), providing pockets, openings, recesses, chamfering, etc., wherever required, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc. (EXCLUDING THE COST OF REINFORCEMENT, SHUTTERING & SPECIFIED ADMIXTURES) for all depths below and upto plinth level in any shape, position and thickness etc. all complete as specified, shown and directed. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR.

RCC Superstructures - Non FIM Items

Providing and laying REINFORCED CEMENT CONCRETE OF M-30 GRADE with 20 mm and down size graded crushed stone aggregates/ gravel in SUPER STRUCTURE in suspended floors, slabs, beams, columns, walls including counterforts, staircases, landings, steps, facias, fins, mouldings, gutters, shelves, window sills, canopies, lintels, girders, ducts, brackets, chajjas with drip moulds, pedestals, posts, struts, equipment/ machine foundations, ramps etc. (including single pour concreting as specified on the drawing), providing cement wash (wherever no other surface application is specified), providing pockets, openings, recesses, chamfering wherever required, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc. (EXCLUDING THE COST OF REINFORCEMENT, SHUTTERING AND SPECIFIED ADMIXTURES) FOR ALL HEIGHTS UPTO & INCLUSIVE OF 20 m ABOVE PLINTH LEVEL in any shape, position, thickness etc. all complete as specified, shown and directed. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR.

Providing and laying REINFORCED CEMENT CONCRETE OF M-30 GRADE with 20 mm and down size graded crushed stone aggregates/ gravel in SUPER STRUCTURE in suspended floors, slabs, beams, columns, walls including counterforts, staircases, landings, steps, facias, fins, mouldings, gutters, shelves, window sills, canopies, lintels, girders, ducts, brackets, chajjas with drip moulds, pedestals, posts, struts, equipment/ machine foundations, ramps etc. (including single pour concreting as specified on the drawing), providing cement wash (wherever no other surface application is specified), providing pockets, openings, recesses, chamfering wherever required, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc. (EXCLUDING THE COST OF REINFORCEMENT, SHUTTERING AND SPECIFIED ADMIXTURES) FOR ALL HEIGHTS MORE THAN 20 m ABOVE PLINTH LEVEL in any shape, position, thickness etc. all complete as specified, shown and directed. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR.

RCC Flooring - Non FIM Items

Providing and laying REINFORCED CEMENT CONCRETE OF M-20 GRADE with 20mm and down size graded crushed stone aggregates / gravel in NON-SUSPENDED slabs / pavement slabs including pedestals, ramps etc. leaving pockets, laying in alternate panels to required slopes, all necessary form work and finishing the top surface rough or smooth, including cost of admixtures if used, providing pockets, openings, recesses, chamfering etc., wherever required, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc. (EXCLUDING THE COST OF REINFORCEMENT AND SHUTTERING) for all depths below and upto plinth level in any shape, position and thickness etc. all complete as specified, shown and directed. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR.

Precast Elements - Non FIM Items

Manufacturing, transporting, supplying and erecting in position Reinforced Cement Concrete PRECAST ELEMENTS such as columns, beams, cover slabs, lintels, louvers, fins, shelves etc. of M-30 grade with 20mm and down size graded crushed stone aggregates/gravel, each unit upto and inclusive of 500 kg. for all leads, levels, shapes and thickness including all moulds, shuttering and centering, vibrating, tamping, curing, chamfering wherever required, finishing the top surface with cement mortar 1:3 ( 1 Cement : 3 Sand) to give a smooth and even surface, or non skid finish as specified, providing lifting hooks, metal inserts, making holes pockets, (only M.S. inserts to be measured & paid separately) transporting to site, erecting, levelling, aligning and fixing in position with cement mortar 1:3 ( Cement : 3 Coarse Sand), breaking bricks and/or concrete surfaces and making good the same etc. all complete (excluding the Cost of Reinforcement ) and as directed. All materials including cement supplied by the contractor.

HYD Bars / MS Bars - Non FIM Items

Fabrication and placing in position HIGH YEILD-STRENGTH DEFORMED STEEL BARS REINFORCEMENT of Grade Fe500D TMT conforming to IS:1786, for RCC work including transporting the Steel, straightening, cleaning, decoiling, cutting, bending to required shapes and lengths as per details, binding with 18 SWG black soft annealed binding wire at every intersection, supplying and placing with proper cover blocks, supports, chairs, overlaps, welding, spacers, fanhooks etc. for all heights and depths etc. all complete as directed. SUPPLY OF ALL MATERIAL IN CONTRACTOR'S SCOPE.

Centering and Shuttering - Non FIM Items

Providing and fixing CENTERING AND SHUTTERING in foundations, footings,raft beams, slabs, pile caps, retaining walls, jambs, counter-forts, buttresses, trenches, equipment/machine foundations, pedestals, abutments, pipe sleepers, columns, plinth beams, lintels, suspended slabs, beams, staircases, landings, steps, non-circular tunnels/bunkers/ silos/ shafts/ hoppers/liquid storage structures etc. for all depths below and upto & inclusive of plinth level including shuttering for single pour concreting, strutting, bracing, propping etc., keeping the same in position during concreting and removal of the same after specified period etc. for Straight/ Inclined Shuttering, keeping necessary provision for inserts, projecting dowels, anchor bolts or any other fixture etc. all complete and as specified and directed.

Providing and fixing CENTERING AND SHUTTERING in superstrctures in retaining walls, jambs, counter-forts, buttresses, equipment/ machine foundations, abutments,columns, lintels, suspended slabs, beams, staircases, landings, steps, non-circular tunnels/ bunkers/ silos/ shafts/ hoppers/ liquid storage structures etc. for all heights above plinth level including shuttering for single pour concreting, strutting, bracing, propping etc., keeping the same in position during concreting and removal of the same after specified period etc. for Straight/ Inclined Shuttering, keeping necessary provision for inserts, projecting dowels, anchor bolts or any other fixture etc. all complete and as specified and directed.

Expansion joints - Non FIM Items

Providing 20mm wide EXPANSION JOINTS in flooring and pavement slabs and ISOLATION JOINTS around equipment foundations/columns/pedestal/trenches etc. including cleaning the joints of all loose material, filling clean sand for the full depth of slab (upto and inclusive of 300 mm) except for 12mm depth from top and sealing the top 12mm with approved two part liquid polysulphide Sealing Compound as per IS:12118 etc. all complete as shown, specified and directed.

Supplying and fixing in position 50 mm (2X25 mm) thick BITUMEN IMPREGNATED FIBRE BOARD conforming to IS:1838 of approved quality in expansion joints at all locations and levels in concrete structures etc. all complete as shown, specified and directed.

Supplying and sealing EXPANSION JOINTS 50 mm wide and 12mm deep at all locations and levels in Concrete Structures with approved two part liquid POLYSULPHIDE SEALING COMPOUND as per IS:12118 including raking of joints etc. all complete as shown, specified and directed.

Mechanical Rebar Couplers - Non-FIM items

"Supplying and fixing MECHANICAL REBAR COUPLER of approved make for jointing high strength deformed steel reinforcement bars of Grade Fe500D (conforming to IS:1786) of dia. upto and inclusive of 25 mm at all levels & locations including testing as per manufacturer's recommendations, adjusting etc. all complete as specified and directed.

"Supplying and fixing MECHANICAL REBAR COUPLER of approved make for jointing high strength deformed steel reinforcement bars of Grade Fe500D (conforming to IS:1786) of dia. above 25 mm at all levels & locations including testing as per manufacturer's recommendations, adjusting etc. all complete as specified and directed.

Fixing Re-bars in already cast concrete - Non FIM Items

Designing, supplying and fixing rebars in already cast concrete, including drilling, cleaning hole with air blow-out & wire-brush and injecting odourless Chemical of approved make, packed in dual foil, with the help of dispenser into a hole of diameter and depth as per manufacture specification, at all levels & locations for high strength deformed steel reinforcement bars of dia. upto 12 mm of Grade Fe500D (conforming to IS:1786), DESIGNED FOR FULL TENSILE ANCHORAGE, including testing (as per manufacturer's recommendations), adjusting and making good any damage done to the structure etc. all complete as specified and directed. SUPPLY OF ALL MATERIAL IN CONTRACTOR'S SCOPE EXCLUDING REINFORCEMENT BARS.

Designing, supplying and fixing rebars in already cast concrete, including drilling, cleaning hole with air blow-out & wire-brush and injecting odourless Chemical of approved make, packed in dual foil, with the help of dispenser into a hole of diameter and depth as per manufacture specification, at all levels & locations for high strength deformed steel reinforcement bars of dia. 16 mm & 20 mm of Grade Fe500D (conforming to IS:1786), DESIGNED FOR FULL TENSILE ANCHORAGE, including testing (as per manufacturer's recommendations), adjusting and making good any damage done to the structure etc. all complete as specified and directed. SUPPLY OF ALL MATERIAL IN CONTRACTOR'S SCOPE EXCLUDING REINFORCEMENT BARS.

STRUCTURAL STEEL WORKS SPEC NO. 6-68-0006

General Steel Works - Non FIM Items

Supplying, transporting, storing, fabricating & erecting in position and testing/ examining bolted and/ or welded STRUCTURAL STEEL WORKS of Grade E350BR / E350B0 (conforming to IS:2062) at all locations and levels UPTO & INCLUSIVE OF 20 m ABOVE HPP/ FGL, including all builtup sections/ compound sections made out of rolled sections and/ or plates/ bent plates in all types of structural frameworks, floor beams, stairs, or any other structural items or accessories to support equipments, piping, conveyor galleries, towers, masts, etc., but excluding silos, bunkers, hoppers, etc., cutting to required size, straightening/ bending if required, edge preparation, cleaning, preheating, bolting/ welding of joints, (including sealing the joints of box sections with continuous welding and plugging any open ends & holes of box sections), finishing edges by grinding, fixing in line and level with temporary staging & bracing and removal of the same after erection, grouting with Ordinary Grout or premix free flow Nonshrink Grout as specified, including preparation and submission of detailed fabrication drawings, preparing the surface for painting (SSPC-SP-10) and applying pre-erection/ shop primer (1 coat of F-9 @ 65-75 micron DFT) as per EIL Specification No. 6-79-0020 (or as per Job Specification, wherever applicable) after fabrication etc., all complete. SUPPLY OF ALL MATERIAL IN CONTRACTOR'S SCOPE.

"Supplying, transporting, storing, fabricating & erecting in position and testing/ examining bolted and/ or welded STRUCTURAL STEEL WORKS of Grade E350BR / E350B0 (conforming to IS:2062) at all locations and levels MORE THAN 20 m ABOVE HPP/ FGL, including all builtup sections/ compound sections made out of rolled sections and/or plates/ bent plates in all types of structural frameworks, floor beams, stairs, or any other structural items or accessories to support equipments, piping, conveyor galleries, towers, masts, etc., but excluding silos, bunkers, hoppers, etc., cutting to required size, straightening/ bending if required, edge preparation, cleaning, preheating, bolting/ welding of joints, (including sealing the joints of box sections with continuous welding and plugging any open ends & holes of box sections), finishing edges by grinding, fixing in line and level with temporary staging & bracing and removal of the same after erection, grouting with Ordinary Grout or premix free flow Nonshrink Grout as specified, including preparation and submission of detailed fabrication drawings, preparing the surface for painting (SSPC-SP-10) and applying pre-erection/ shop primer (1 coat of F-9 @ 65-75 micron DFT) as per EIL Specification No. 6-79-0020 (or as per Job Specification, wherever applicable) after fabrication etc., all complete. SUPPLY OF ALL MATERIAL IN CONTRACTOR'S SCOPE.

Painting - Non FIM Items

Supplying and applying FIELD PAINT SYSTEM of approved quality and shade as per Sl. No. 10.2 of Table 10.0 of EIL Specification No. 6-79-0020 (or as per Job Specifications, wherever applicable) over the coat of shop primer already applied, including storage, surface preparation, degreasing, cleaning, drying, providing necessary arrangement for access, testing etc. including touching up of shop primer coat as per Sl. No. 7.2.1 of Table 7.2 of EIL Specification No. 6-79-0020 (or as per Job Specifications, wherever applicable), for steel structures (excluding ladders, spiral stairways & hand rails) at all location & levels, all complete as specified, in OFFISTE (COASTAL) areas as well as UNIT (INLAND & COSTAL) areas considering environmental classification as INDUSTRIAL MARINE. SUPPLY OF ALL MATERIAL IN CONTRACTOR'S SCOPE. (Unit rate based on Structural steel weight).

Supplying and applying COATING (Post-erection/ Field) of approved quality and shade as per Sl. No. 8.1 of Table 8.0 of EIL Specification No. 6-79-0020 (or as per Job Specifications, wherever applicable) for painting over the coat of shop primer & galvanisation already applied, including storage, surface preparation, degreasing, cleaning, drying, providing necessary arrangement for access, testing etc. including touching up of shop primer coat, for LADDERS, SPIRAL STAIRWAYS & HAND RAILS at all location & levels, all complete as specified. SUPPLY OF ALL MATERIAL IN CONTRACTOR'S SCOPE. (Unit rate based on weight of steel).

Grouting

Supplying & applying Grouting below the bases of structural steel members with Free-flow Non-shrink Cementitious Grout of approved make.

STRUCTURAL STEEL WORKS (TUBULAR/HOLLOW SECTION) (REFER SPECIFICATION NO.6-68-0007)

Yst310 IS1161

"Supplying, transporting, storing, fabricating, erecting in position and testing / examining at all locations and levels bolted and/or welded TUBULAR STEEL WORKS of all types using STEEL TUBES OF YST 310 GRADE CONFORMING TO IS:1161 in all types of trusses, girders, purlins, siderails, columns, runners, beams, ties, portals, frame work, bracings, brackets, sagrods etc. including all handling, straightening/bending if required, cutting to required size & shape, edge preparation, welding & bolting of joints, providing and fixing end caps and plugging holes, fixing in line and level with necessary temporary staging and removal of the same after erection, grouting with Ordinary Grout/premix free flow Non Shrink Grout as specified, preparation & submission of detailed fabrication drawings, preparing the exposed surfaces for painting (SSPC-SP-10) and applying pre-erection/ shop primer (1 coat of F-9 @ 65-75 micron DFT) as per EIL Specification No. 6-79-0020 (or as per Job Specification, wherever applicable) etc. all complete as specified & directed. SUPPLY OF ALL MATERIALS INCLUDING PLATES IN CONTRACTOR'S SCOPE.

Yst310 IS 4923

"Supplying, transporting, storing, fabricating, erecting in position & testing/examining at all locations and levels, bolted and/or welded STRUCTURAL STEEL WORKS of all types using ""COLD FORMED (RECTANGULAR/SQUARE) HOLLOW SECTIONS conforming to IS: 4923, Grade Yst-310 of approved make"" in all type of trusses, purlins, girders, side rails, columns, runners, beams, ties, portals, framework,bracing, brackets, sagrods etc. including all handling straightening/bending if required, cutting to required size & shape, edge preparation, welding & bolting of joints, providing and fixing end caps and plugging holes, fixing in line and level with necessary temporary staging and removal of the same after erection, grouting with Ordinary/ premix free flow Non-Shrink Grout as specified, preparation and submission of detailed fabrication drawings, preparing the exposed surfaces for painting (SSPC-SP-10) and applying pre-erection/ shop primer (1 coat of F-9 @ 65-75 micron DFT) as per EIL Specification No. 6-79-0020 (or as per Job Specification, wherever applicable) etc. all complete as specified and directed (SUPPLY OF ALL MATERIALS INCLUDING PLATES IN CONTRACTOR'S SCOPE).

MISCELLANEOUS STEEL WORKS SPECIFICATIONS NO. 6-68-0008

Anchor Bolts - Non FIM Items

Supplying, fabricating, fixing and keeping in position at all levels and locations THREADED ANCHOR BOLTS of all diameters and nomenclature including nuts, washers, anchor plates, pipe sleeves etc. in foundations, columns, pedestals, slabs, beams, walls etc. or any other place as directed including handling & transporting, straightening if required, turning from relevant size M.S. rounds to required diameter, threading, welding, providing necessary templates and auxiliary dummy structures, if any, necessary tying and welding with reinforcement, adjustment of shuttering & reinforcement/any other fixture, greasing exposed metal surfaces, covering bolts and packing the sleeves with jute cloth etc. all complete as specified and directed.(SUPPLY OF ALL MATERIALS IN CONTRACTOR'S SCOPE).

MS Metal Inserts - Non FIM Items

Supplying, transporting, storing, fabricating and fixing in position M.S. METAL INSERT (with lugs) of any shape made out of flats, plates, rolled sections, pipes etc. providing necessary templates, staging, cutting, straightening, if required, bolting, welding as required and embedding in position on both Plain and Reinforced Cement concrete members inclusive of adjusting shuttering & reinforcement/ any other fixture, welding where necessary, tying and holding to correct level, line and position, any auxiliary dummy structures to support the heavy inserts, painting exposed surfaces with a coat of primer as per EIL Specification No. 6-79-0020 (or as per Job Specification wherever applicable), etc. all complete for all depths and heights as specified and directed. (SUPPLY OF ALL MATERIALS IN CONTRACTOR'S SCOPE).

GI Pipe Sleeves - Non FIM Items

Supplying, fabricating and fixing in position G.I. PIPE SLEEVES of all diameters including providing necessary staging, cutting, straightening if required, bolting, welding as required and embedding in position on both Plain and Reinforced Cement concrete members inclusive of adjusting shuttering & reinforcement/any other fixture, welding where necessary, tying and holding to correct level, line and position, any auxiliary dummy structures to support heavy sleeves etc. all complete for all depths and heights as specified and directed.

MS Chequered Plates - Non FIM Items

Supplying, fabricating and erecting in position at all levels and locations bolted, screwed and/or welded M.S. CHEQUERED PLATES of any thickness in walkways, platforms, stair treads, any other place as directed etc. including cutting to required size, shape, making holes, notches, openings of required size, nosing, straightening if required, making the edges smooth, removing the burrs, fixing, welding, preparation and submission of fabrication drawings and preparing the surfaces for painting and applying shop primer as per EIL Specification No. 6-79-0020 (or Job Specification, wherever applicable) after fabrication etc. all complete as specified and directed. (SUPPLY OF ALL MATERIALS IN CONTRACTOR'S SCOPE).

MS Grating Cat. A,B - Non FIM Items

Supplying, fabricating and erecting in position at all levels and locations ELECTROFORGED GALVANISED GRATING (purchased from approved manufacturer by the Contractor) conforming to EIL Standard No. 7-68-0697 (in walkways, platforms, stair treads etc.) and EIL Standard No. 7-65-0206 (in catch basins, drains, etc.) including cutting to required size, shape, making holes, notches, openings of required size, nosing, straightening if required, making the edges smooth, removing the burrs, fixing with manufacturer's supplied galvanised clamps, preparation and submission of fabrication drawings, all complete as specified and directed (SUPPLY OF ALL MATERIALS IN CONTRACTOR'S SCOPE).

Cold Formed Light guage - Non FIM Items

Supplying, fabricating, erecting in position at all levels and locations and testing COLD FORMED LIGHT GAUGE STEEL structural sections of any approved shape for purlins, side girts etc. (manufactured by approved manufacturer) including sag rods, cleats, crook bolts, fixtures, splices/sleeves, bolts, nuts, cutting to required size straightening if required, bolting/ welding of joints, finishing edges by grinding, fixing in line and level with temporary staging and removal of the same after final alignment, preparation and submission of detailed fabrication drawings, preparing the surface for painting and applying shop primer as per EIL Specification No. 6-44-0004 (or Job Specification, wherever applicable) etc. all complete as specified and directed. (SUPPLY OF ALL MATERIALS IN CONTRACTOR'S SCOPE).

MS Rungs - Non FIM Items

Supplying, fabricating, fixing and keeping in position M.S. RUNGS in R.C.C. works at all depths and heights including handling, transporting the steel to site workshop and site of work, straightening, if required, cutting, bending to shape, necessary tying and welding with reinforcement, adjustment of shuttering, cleaning, surface preparation, shop primer as per EIL Spec. 6-79-0020 (or Job Specification, wherever applicable) and two coats of anticorrosive paint of approved quality on the exposed portion of rungs etc. all complete as specified and directed (SUPPLY OF ALL MATERIALS IN CONTRACTOR'S SCOPE).

Hand Railing 1000mm - Non FIM Items

Supplying, fabricating and fixing in position at all locations 1000mm high HORIZONTAL HAND RAILING (for platforms, walkways, etc. or any other location as directed) consisting of top rail, mid rail and vertical posts (Maximum spacing 1500mm c/c) with 32mm nominal diameter medium grade MS Tubes conforming to IS:1239 and 100x5 MS Toe Plate confirming to IS:2062 (Grade A/B), including straightening if required, cutting, bending, welding, bolting, grouting with ordinary grout, cleaning, surface preparation, hot-dip galvanising (80-85 micron as per IS:4759, IS:2629, IS: 4736, IS:2633), shop primer (1 coat of P6 of 40 micron) as per Sl. No. 8.1 of Table 8.0 of EIL SPEC. 6-79-0020 (or as per Job Specification, wherever applicable), preparation and submission of fabrication drawings etc. all complete as specified, shown and directed. (SUPPLY OF ALL MATERIALS IN CONTRACTOR'S SCOPE). (Complete handrail work shall be measured as length of top rail only and not length of each element fixed).

Mechanical Anchor fastners - Non FIM Items

"Supplying, handling, transporting to site of work and fixing approved MECHANICAL ANCHOR FASTENERS M.S. bolts of Grade 5.8 or more, GALVANIZED with minimum thickness of 5 microns (approved for use in cracked concrete), of 16mm dia at specified positions on concrete floors, roofs, beams (sides and bottom), walls, columns etc. according to manufacturer's specifications including all accessories like nuts, washers etc. of required size, testing, necessary scaffolding, drilling of the holes in concrete surface with electric drill, cleaning of holes with air blowout & wire-brush, and making good any damage done to the structure etc. all complete for all heights, depths and locations as specified and directed.

Chemical Anchor Fastner

"Supplying, handling, transporting to site of work and fixing approved CHEMICAL ANCHOR FASTENERS consisting of M.S. threaded rod of Grade 5.8, GALVANIZED with minimum thickness of 5 microns and chemical (approved for use in cracked concrete), packed in flexible chemical foil or dual foil type, to be used with the help of dispenser, of 20mm dia. at specified positions on concrete floors, roofs, beams (sides and bottom), walls, columns etc. according to manufacturer's specifications including all accessories like nuts, washers etc. of required size., testing, necessary scaffolding, drilling of the holes in concrete surface with electric drill, cleaning of holes with air blowout & wire-brush and making good any damage done to the structure etc. all complete for all heights, depths and locations as specified and directed."

"Supplying, handling, transporting to site of work and fixing approved CHEMICAL ANCHOR FASTENERS consisting of M.S. threaded rod of Grade 5.8, GALVANIZED with minimum thickness of 5 microns and chemical (approved for use in cracked concrete), packed in flexible chemical foil or dual foil type, to be used with the help of dispenser, of 24mm dia. at specified positions on concrete floors, roofs, beams (sides and bottom), walls, columns etc. according to manufacturer's specifications including all accessories like nuts, washers etc. of required size., testing, necessary scaffolding, drilling of the holes in concrete surface with electric drill, cleaning of holes with air blowout & wire-brush and making good any damage done to the structure etc. all complete for all heights, depths and locations as specified and directed."

Scaffolding System

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to & inclusive of 20 m height, made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.

DEMOLISHING AND DISMANTLING (REFER SPEC NO. 6-68-0012)

Brickwork - Non FIM Items

Demolishing BRICKWORK (taking all necessary safety precautions) for all depths below plinth level including supply of all tools and tackles, necessary scaffolding, propping, underpinning, cleaning and stacking of serviceable material, disposal of unserviceable material to spoil heaps anywhere within the plant boundary, all complete as specified and directed. (Excavation & backfilling shall be paid separately under relevant items).

Demolishing BRICKWORK (taking all necessary safety precautions) for all heights above plinth level including supply of all tools and tackles, necessary scaffolding, propping, underpinning, cleaning and stacking of serviceable material, disposal of unserviceable material to spoil heaps anywhere within the plant boundary, all complete as specified and directed.

RCC - Non FIM Items

Demolishing RCC WORK (taking all necessary safety precautions) for all depths below plinth level including supply of all tools & tackles, necessary scaffolding, propping, underpinning etc., cutting, straightening, scraping and cleaning of reinforcement bars, stacking of serviceable materials, disposal of unserviceable material to spoil heaps anywhere within the plant boundary, all complete as specified and directed. (Excavation & backfilling shall be paid separately under relevant items).

Demolishing RCC WORK (taking all necessary safety precautions) for all heights above plinth level including supply of all tools & tackles, necessary scaffolding, propping, underpinning etc., cutting, straightening, scraping and cleaning of reinforcement bars, stacking of serviceable materials, disposal of unserviceable material to spoil heaps anywhere within the plant boundary, all complete as specified and directed.

Making cut-outs in RCC slab/ wall upto a thickness of 400mm (taking all necessary safety precautions) by vibration-less spark-free mechanical means like core-cutting, wet cutting by diamond wall saw system at all depths & heights including supply of all tools & tackles, necessary scaffolding etc. cutting of reinforcement bars, disposal of unserviceable material, plastering & finishing the cut surfaces, all complete as specified and directed by the Engineer-in- Charge (Measurement on Plan/ Elevation Area basis).

Steelwork - Non FIM Items

Dismantling bolted/rivetted/welded STRUCTURAL STEEL WORK of all descriptions (taking all necessary safety precautions), including supply of all tools and tackles, consumables, necessary scaffolding etc., providing temporary bracings as required, cutting (by flame or saw) gusset plates, bolts, nuts, weldings etc., transporting and stacking of the serviceable materials, cleaning the site of work of all unserviceable materials for disposal to spoil heaps anywhere within the plant boundary, all complete at all depths and heights, as specified and directed.

MISCELLANEOUS ITEMS (REFER SPECIFICATION NO. 6-68-0013)

Antitermite - Non FIM Items

Providing and injecting approved chemical emulsions as specified for pre-constructional ANTI-TERMITE TREATMENT and creating a chemical barrier under and around column pits, wall trenches, basement excavations, top surfaces of plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, surrounding of pipes and conduits etc. all complete as specified and directed. (Plinth area of the building at ground floor only shall be measured).

Cutting RCC Piles - Non FIM Items

Building pile heads - Non FIM Items

Sand Filling - Non FIM Items

Supplying and filling approved SAND of specified quality under floors, in foundations, plinths, tank foundations etc. for all depths and heights including cost of sand, royalties, transportation to site for all leads and lifts, including loading, unloading, spreading in layers of loose thickness not exceeding 150 mm, watering, ramming, compacting with mechanical compactors and/or other equipment to the specified levels to achieve 85% relative density as per IS:2720 Part XIV, including preparation of subgrade to the required slope, providing testing apparatus and testing the degree of consolidation all complete as per drawings, specifications and direction of Engineer-in-charge. The rates shall be inclusive of the cost of all labour, material, equipments etc. all complete .

DPC - Non FIM Items

Providing and laying 40mm thick DAMP PROOF COURSE with plain cement concrete of nominal mix of 1:1.5:3 with 10mm & down size graded crushed stone aggregates in two layers of 20mm thick with two coats of hot bitumen (Grade A90/S90 conforming to IS:73) applied @ 1.7 Kg/sq.m. over each layer as per specifications including cleaning, watering the top surface of walls, centering, shuttering, placing, tamping, curing, sprinkling an even layer of dry & sharp sand over the hot bitumen etc. all complete as specified and directed.

BI-POLAR CONCRETE PENETRATING CORROSION INHIBITING ADMIXTURE

Supplying and mixing of approved brand of BI-POLAR CONCRETE PENETRATING CORROSION INHIBITING ADMIXTURE (confirming to EIL Specification No. 6-68-0017) in concrete as per manufacturer's specification for protection of reinforcement against corrosion. Supply of admixture in Contractor's scope.

BONDING FRESH CONCRETE TO OLD CONCRETE BY EPOXY RESIN BONDING SYSTEM (REFER SPECIFICATION NO. 6-68-0056)

Epoxy Resin - non FIM Items

Providing and applying approved EPOXY RESIN (prepared as per manufacturer's recommendation) for bonding of fresh concrete to old concrete in all types of structure at all depths and heights including cleaning of concrete surface, removing of all loose concrete pieces, making rough by chiselling, taking off the skin of concrete, application of Epoxy Resin System by spraying, necessary working platforms, props, scaffolding and other safety measures, removal of same after completion etc. all complete as specified and directed. (Excavation, backfilling, removal of surplus earth, keeping pit dry by pumping/bailing subsoil water shall be paid separately under relevant items).

CONCRETE BLOCK MASONRY (REFER SPECIFICATION NO. 6-68-0016)

Solid Conc Block (Half) Grade C (5.0) - Non FIM Item

Providing and laying HALF CONCRETE BLOCK MASONRY with SOLID CONCRETE BLOCKS of Grade C (5.0) in cement mortar 1:4 (1 Cement : 4 Coarse Sand) in any shape, including the cost of materials, labour, scaffolding/ staging, sampling and testing, soaking of blocks, cutting and laying of blocks, providing openings of any shape & size, raking out the joints, supplying and placing 2 Nos. 6 mm dia. mild steel reinforcement bars at every fourth course, sealing the gap between masonry and soffit of beam/ slab, embedding the fittings and fixtures, curing etc. all complete as per specification. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY CONTRACTOR.

Solid Conc Block Grade C (5.0) - Non FIM Item

Providing and laying CONCRETE BLOCK MASONRY with SOLID CONCRETE BLOCKS of Grade C (5.0), in cement mortar 1:6 (1 Cement : 6 Coarse Sand) in one or more block thickness and in any shape (excluding circular/ curved block masonry) at all depths below & upto plinth level including the cost of materials, labour, scaffolding/ staging, sampling & testing, soaking of blocks, cutting and laying of blocks, making openings of any shape & size, finishing the joints flush below ground level and raking out the joints above ground level, sealing the gap between masonry and soffit of beam/ slab, filling the blocks with mortar at specified locations, embedding the fittings & fixtures, curing, etc. all complete as per specifications. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR

Providing and laying CONCRETE BLOCK MASONRY with SOLID CONCRETE BLOCKS of Grade C (5.0), in cement mortar 1:6 (1 Cement : 6 Coarse Sand) in one or more block thickness and in any shape (excluding circular/ curved block masonry) at all heights above plinth level including the cost of materials, labour, scaffolding/ staging, sampling & testing, soaking of blocks, cutting and laying of blocks, making openings of any shape & size, finishing the joints flush below ground level and raking out the joints above ground level, sealing the gap between masonry and soffit of beam/ slab, filling the blocks with mortar at specified locations, embedding the fittings & fixtures, curing, etc. all complete as per specifications. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR

SUPPLY OF MANPOWER

Supply of Un-skilled Manpower

Providing assistance to the Owner/EIL by providing Un-skilled workers as per the directions of Engineer-in-Charge, with all tools & tackles, PPEs, consumables, etc. and supervision (including site and safety supervision) with the single point responsibility for quality, safety and speed of execution with the following manpower on fixed basis. Contractor to provide and mobilize manpower in shifts on need basis as per the directions of Engineer-in-Charge. (One Manday = 8 hours shift duty per day) Un-skilled Manpower (Helper, Cleaner, Sweeper, Mazdoor, watchman, loader, unloader, messenger, any other un-skilled worker)

GENERAL CIVIL

Supply and installation of valves

Supply and installation of screwed valves as per piping material specification including fixing in position with threaded connections complete as per drawings, specifications and directions of Engineer-in-charge.

Globe valve for following nominal sizes and piping material class

Dia 1 Inch Piping Material Class J2A

MISC. CIVIL AND STRUCTURAL WORKS FOR U/G PIPING AND OTHER CIVIL WORKS

Providing 13mm thick average cement plaster in cement mortar 1:3 (1 cement: 3 sand) on brick walls/stone masonry/pitching or on concrete surfaces for manholes, valves pits, culverts, wing walls, etc. including cleaning and preparation of the surface, scaffolding, curing etc. for all depths and heights complete as per drawings specifications and direction of Engineer-in-Charge.

All materials including cement supplied by the Contractor.

Providing 20mm thick average cement plaster in cement mortar 1:3 (1 cement: 3 sand) on brick walls/stone masonry/pitching or on concrete surfaces for manholes, valves pits, culverts, wing walls, etc. including cleaning and preparation of the surface, scaffolding, curing etc. for all depths and heights complete as per drawings specifications and direction of Engineer-in-Charge. All materials including cement supplied by the contractor.

Providing 16mm thick average cement plaster in cement mortar 1:3 (1 cement: 3 sand) on brick walls/stone masonry/pitching or on concrete surfaces for manholes, valves pits, inspection chambers, septic tanks,Compound wall, culverts, wing walls, etc. including cleaning and preparation of the surface, scaffolding, curing etc. for all depths and heights complete as per drawings specifications and direction of Engineer-in-Charge.

All materials including cement supplied by the Contractor.

Supplying and fixing in position medium/ heavy duty CI manhole frame with lugs and cover conforming to IS-1726 including breaking of brick masonry or concrete surface to receive frame with lugs and making good the same with CM 1:3 including applying two coats of anticorrosive paint inclusive of all labours and materials etc. complete

circular size 500 mm dia. Medium duty of grade MD-10

circular size 560 mm dia. Heavy duty of grade HD-20

Providing cement mortar grouting on brick masonry / RCC wall for filling free space between pipe body and masonry wall/concrete wall with 1:2 (1 cement: 2 sand) mortar including packing, consolidating, curing, finishing, etc. complete as per drawings specifications and directions of Engineer-in-Charge.

All materials including cement supplied by the Contractor.

Supplying, construction , testing & commissioning of RCC Neutralisation pit concrete , providing lean concrete 1:5:10 (1 cement : 5 sand : 10 aggregate) at bottom of Neutralisation pit and PCC 1:2:4 at Finished Grade Level, rungs, lime fill, acid proof lining, chequered plate with lifting hooks, grouting in 1:2 cement mortar(1 cement :2 sand ), painting with bitumen primer and Epoxy paint, grouting between pipe and pit wall in 1:2 cement mortar (1 cement : 2 sand), reinforcement steel including straightening, cleaning, cutting, bending, keeping in proper position, centering, shuttering etc. including earth work in excavation in all types of soil except soft rock and hard rock, backfilling & disposal of surplus earth for all leads within the complex limit etc. complete as per standards, drawings, specifications and directions of Engineer-in-charge.

All material including cement supplied by the Contractor For following grade of concrete.

grade of concrete M30

Providing 13mm thick average cement plaster in cement mortar 1:6 (1 cement: 6 sand) on brick walls/stone masonry/pitching or on concrete surfaces for manholes, valves pits, culverts, walls, etc. including cleaning and preparation of the surface, scaffolding, curing etc. for all depths and heights complete as per drawings specifications and direction of Engineer-in-Charge. All materials including cement supplied by the Contractor.

PLUMBING AND BUILDING DRAINAGE

Providing and fixing approved stone ware 100mmx100mm dia. gully trap as per EIL Std. no.7-65-0214 including grating with CI frame and cover 400mmx400mm including solid concrete block masonry chamber in 1:4 cement mortar( 1 cement: 4 sand) on M-20 grade cement concrete foundation, plastered inside and outside surfaces with 1:3 cement mortar (1 cement: 3 sand) with 13mm average thickness including providing and fixing light duty CI frame and cover, painting CI frame and cover with two coats of chlorinated rubber zinc phosphate primer @ 40μ DFT per coat and finish painting consists of two coats of chlorinated rubber paint @40μ DFT per coat, earth work in excavation, backfilling, removal of surplus earth, benching with M-20 grade cement concrete and rendering smooth with a neat coat of cement slurry etc. all complete as per drawings, specifications and directions of Engineer-in-Charge. All materials including cement supplied by contractor.

Gully trap

Supplying, laying and jointing of above ground approved quality UPVC pipes to be used for soil and waste discharge application inside buildings confirming to IS:13592 (Type-B) and fittings confirming to IS: 14735 with all necessary specials such as bends, Y junction, T junction (both single and double) plugs, coupler, adapter, shoes etc. including solvent welded jointing and testing as per IS: 7634 (Part-3), cutting floors/walls and making good the same after fixing including supply and fixing hooks/ clamps etc. complete as per drawings, specifications and directions of Engineer-in-Charge. For the following Nominal Bore (NB) pipe:

(All materials including cement supplied by contractor)

Nominal Dia. 75 mm

Nominal Dia. 90 mm

Nominal Dia. 110 mm

Supplying, laying and jointing of underground approved quality UPVC pipes to be used for soil and waste discharge application inside buildings confirming to IS:13592 (Type-B) and fittings confirming to IS: 14735 with all necessary specials such as bends, Y junction, T junction (both single and double), plugs, coupler, adapter etc. including solvent welded jointing and testing as per IS: 7634 (Part-3), cutting in floors, earth work in excavation, encasing the pipe in 50mm thick PCC M20, backfilling and disposal of surplus earth / debris to demarcated area anywhere within plant complex limit etc. complete as per drawings, specifications and directions of Engineer-in-Complete. For the following Nominal Bore (NB) pipe:

(All materials including cement supplied by contractor)

Nominal Dia. 75 mm

Nominal Dia. 90 mm

Nominal Dia. 110 mm

Supply and installation on terrace/ staging, circular drinking water tank, of polyethylene with PUF insulation for temperature control, material conforming to BIS codes including supply and installation of all fittings, cover with suitable locking arrangement, float valve, making necessary holes for inlet, outlet and overflow connection and vent pipe etc. and the base supports for tank including supply of all necessary material all complete as per specifications and directions of Engineer-in-charge. For following capacities

Capacity 1000 Litre

Supplying and fixing approved quality UPVC Floor Trap with CP pressed steel grating as per IS: 14735 including cutting floors and making good the same, etc., making inlet and outlet connections, etc. complete for 100mm inlet and 75mm outlet as per drawings, specifications and directions of Engineer-in-Charge.

Supplying and fixing approved quality UPVC Floor Trap with CP pressed steel grating as per IS: 14735 including cutting floors and making good the same, etc., making inlet and outlet connections, etc. complete for 100mm inlet and 90mm outlet as per drawings, specifications and directions of Engineer-in-Charge.

Construction, supplying, installation, testing and commissioning of septic tank as per standards and IS:2470 Part-I , with all necessary accessories like inlet, outlet pipes, vent pipes, manhole covers, rungs etc. including earthwork in excavation in all type of soil except soft and hard rock, backfilling and disposal of surplus earth for all leads etc. complete as per standards, drawings, specifications and directions of Engineer-in-Charge.

All materials including cement supplies by the contractor No. of Users 10 nos

All materials including cement supplies by the contractor No. of Users 50 nos

Preparation of internal building plumbing and sanitary piping layouts for building as per National Building Code/ Relevant IS codes and getting the same approved by Owner/ PMC.

Building Name SRR-11

Building Name Substation-JP1

Building Name Gate House

Building Name Substation JU1 & SRR-12

ACID RESISTING BRICK/ TILE LINING

Supply and laying of unglazed vitreous acid resisting tiles confirming to IS: 4457, applying silicate/ resin mortar for jointing as per IS: 4832 (Part I/ II) including applying bitumen primer and 19mm thick bitumen mastic on cement plaster surfaces/ masonry/ RCC surface. The thickness of the tiles shall be minimum 16mm. The size of the tile shall be 300mm x 300mm. Including supply of all materials, finishing, curing, testing etc. as per drawings , specifications and directions of Engineer-in-charge.

MISCELLANEOUS ITEMS

Supply and installation of combined safety shower and eyewash units as per spec. no.6-66-0038, including providing and fixing of necessary foundation bolts in foundations/ pavement etc. complete. Each safety shower shall have proper sign board with florescent letters showing their location, all complete as per specification, drawings and direction of Engineer-in-charge.

NDT Testing

DYE PENETRATION / MAGNETIC PARTICLE TEST Performing of magnetic particle test or dye penetration test including supply of all necessary materials, equipment and labour for carrying out the work as per specs. and direction of Engineer-in -charge

DP TEST LENGTH(BW&SW)

MAGNETIC PARTICLE TEST

RADIOGRAPHY :- Performance of radiographic inspection on piping of all types & thicknesses including providing or hiring of all necessary equipment and whatever else even though not expressly mentioned but required to perform the work as per specifications and instructions of Engineer-in-Charge. Radiographs shall be submitted to the Engineer-in-charge. (Repeat Radiography due to defective radiograph on repaired joints due to Contractor's fault and for additional radiography necessitated due to poor performance of contractor's welders shall be done at contractor's cost) Note: Unit for radiography quantity is 'Nos of circumferential weld joints'.

FOR JOINTS THK. <= 8MM (FOR CS OTHER THAN CLASS lV OF SPEC FOR NDT REQUIREMENT OF PIPING)

Nominal Dia. 4 Inch

Nominal Dia. 6 Inch

Nominal Dia. 2 Inch

Nominal Dia. 1 Inch

Installation of Valve

Transportation of all kind of valves( including special and motor operated valves) from owner's storage point to contractor's store/ work site and installation of valves for all rating including assembly of valve accessories, if any, fixing of gaskets, bolts/ nuts etc. complete as per specifications drawings and direction of Engineer-in-charge including returning all unused/ surplus material to owner's storage point (valves along with accessories shall be supplied by owner as free issue material)

Flanged/ Wafer Valves

Nominal Dia. 6 Inch

Nominal Dia. 1 Inch

Nominal Dia. 4 Inch

Nominal Dia. 2 Inch

Nominal Dia. 1.5 Inch

Rain Water Recharging Well

Construction of rain water recharging well including earthwork in excavation in all types of soils excluding soft rock and hard rock, excavation in soft rock and hard rock shall be paid under relevant item, backfilling and disposal of the debris/surplus earth within a lead of 100 m, supply of all filler materials, mild steel perforated pipe, precast cover slab, brick masonry etc all complete as per EIL standard drawings, specifications and directions of Engineer-in-charge. (Depth of well upto 10.0m from ground level) For catchment area:

Up to 500 Sqm

Above 500 sqm and up to 1500sqm

Above 1500 sqm and up to 3000sqm

Portable/ trolley mounted Extinguishers

Supply and installation of portable DCP ( Dry Chemical Powder Type) extinguisher including transporting to worksite, fixing in position including all accessories and all labor and material etc. complete as per drawings, specification and directions of Engineer-in-Charge.

Capacity in Kg 6

Supply and installation of portable CO2 extinguishers including transporting to worksite, fixing in position including all accessories and all labor and material etc. complete as per drawings, specification, data sheet and directions of Engineer-in-Charge.

Capacity in Kg 4.5

Painting of A/G pipes and valves

Supply of paints and primers, preparation of surfaces and application of primer and finish paints, identification (Line numbering), lettering, colour bands, colour coding etc. as specified including rubdown and touch up of shop primer wherever required, providing scaffolding for all heights, labour, material, tools and tackles, consumables supervision etc. to complete the work in all respects as per painting specification, drawings and direction of Engineer-in-Charge for all types of un insulated piping and insulated piping as specified including all pipes, fittings, flanges, supports, valves etc. Surface preparation by blast cleaning and application of first coat of primer (inorganic zinc silicate, F9) shall be done in fabrication yard prior to erection. The identification marks of the piping and joints shall be noted before blasting and the same shall be transferred on primed surface with Polyurethane paint (F2) or as per the instructions of Engineer-in-Charge. Notes: 1. All joints (fabrication as well as erection joints) shall be left unpainted till hydro testing. 2. No extra payment shall be made for identification (line numbering etc.) of insulated and uninsulated lines.

Painting of uninsulated surfaces for ' Industrial marine ' environment as per painting specification for CS piping for design temp group: -14 to 80 (Deg C) including surface preparation. For following pipe sizes

Nominal Dia. 1 Inch

Nominal Dia. 4 Inch

Nominal Dia. 6 Inch

Nominal Dia. 2 Inch

Nominal Dia. 1.5 Inch

Painting of uninsulated surfaces for ' Industrial marine ' environment as per painting specification for CS piping for design temp group: -14 to 80 (Deg C) including surface preparation. For following valve sizes

Dia. Of Valve 1 Inch

Dia. Of Valve 4 Inch

Dia. Of Valve 6 Inch

Dia. Of Valve 2 Inch

Supply, fabrication and Erection of piping(underground)

Water System Galvanised Pressure Piping (Under Ground) (Screwed)

Nominal Dia 1 Inch Piping class J2A

Nominal Dia 2 Inch Piping class J2A

UNDERGROUND SEWER SYSTEM - RCC PIPES

Dia. (Internal) 150 mm Pipe Class P1

Fabrication and Erection of piping (Above ground)

PIPING (ABOVE GROUND): Transportation of all piping items from owner's storage point to work site/workshop, fabrication including cutting, edge preparation (including grinding the edges of pipe, fittings, flanges etc. to match with the mating edges of uneven/different thickness wherever required), fitup, bending, preheating wherever required, welding, threading, and laying of pipes of all type and thickness over pipe sleepers, overhead on racks and at all elevations, connecting with equipment nozzles, strainers, orifice assemblies, tapping for pressure gauges etc., fixing of gaskets, bolts, nuts including application of torque wherever required and all other inline instruments and fitting like elbows, reducers, tees, vents, drains, SW valves upto 1.5 NB, alignment, cleaning & flushing by water/compressed air, hydrostatic, pneumatic, vacuum, spark testing and any other type of testing as specified, draining, drying by compressed air completing all such works in all respects (including preparation of isometrics as mentioned in the scope of work for the job) as per drawings, specifications and instruction of Engineer-in-charge. (Pipes and fittings shall be supplied by owner as free issue material)

Carbon Steel Piping (Non IBR), Thickness <=10 mm

Fabrication, For the following nominal sizes

NB upto 1.5 inch

NB 2 inch - 6 inch

Erection , for Water System (Pressure Piping), For following Nominal Sizes

NB upto 1.5 inch

NB 2 inch - 6 inch

PIPING (ABOVE GROUND): Transportation of all piping items from owner's storage point to work site/workshop, including providing internal cement lining on pipes and specials as per specification for cement lining, fabrication including cutting, edge preparation (including grinding the edges of pipe, fittings, flanges etc. to match with the mating edges of uneven/different thickness wherever required), fitup, bending, preheating wherever required, welding, including providing pipe joints as per specifications including supply & erection of collars for pipe joints and laying of pipes of all type and thickness over pipe sleepers, overhead on racks and at all elevations, connecting with equipment nozzles, strainers, orifice assemblies, tapping for pressure gauges etc., fixing of gaskets, bolts, nuts including application of torque wherever required and all other inline instruments and fitting like elbows, reducers, tees, vents, drains, SW valves upto 1.5 NB, alignment, cleaning & flushing by water/compressed air, hydrostatic, pneumatic, vacuum, spark testing and any other type of testing as specified, draining, drying by compressed air completing all such works in all respects (including preparation of isometrics as mentioned in the scope of work for the job) as per drawings, specifications and instruction of Engineer-incharge. (Pipes and fittings shall be supplied by owner as free issue material)

Dia. 4 Inch PMS A94Y

Dia. 6 Inch PMS A94Y

Supply, fabrication and Erection of piping (Above ground)

Drinking water G.I. PIPING (ABOVE GROUND)

Supplying and laying ABOVE GROUND mild steel galvanized pipes for drinking water system as per piping material specification, including supply and installation of reducing tees, fittings, elbows, nipples, Teflon tapes, white lead etc., cutting the pipes to required lengths, making threads, including laying of pipes on pipe rack, sleepers, T-supports, erection of piping on technological structures etc. including joining of pipes and fittings with threaded/ flanged connections etc. hydrostatic testing of the piping including supply of necessary fittings etc. and pipe supports complete as per data sheets, specifications, drawings and instructions of Engineer-in-charge.(Pipe shall be insulated. S/I of insulation shall be under separate SOR)

Dia. 2 Inch PMS J2A

Dia. 1 Inch PMS J2A

fire fighting equipment's

Supply, installation, testing and commissioning of following firefighting equipment as per relevant specifications, data sheet, drawing, including transporting the equipment to worksite, fixing of nuts, bolts, washers, gaskets, welding needed for fixing the equipment with matching flange etc. all complete as per drawings, specifications, standards, data sheet and direction of Engineer-in-Charge.

Double headed landing valve

First Aid hose reel wall mounted type

Hose box cabinet Type-II (Wall mounted type) including all inside accessories, including all civil works, fixing in position with anchor bolts in foundations or wall

Miscellaneous Items

Miscellaneous

Supply and installation of an Air release valve in the piping network, as per the datasheet B895-999-81-45-DS-8021 attached to the tender, as per the standards, specifications, and directions of the Engineer in Charge.

Supply, construction, testing & commissioning of Solid concrete block masonry Upflow Anaerobic filter and bleaching Tank as per EIL drawing, specifications with all necessary accessories like inlet and outlet 160DN Type B uPVC pipes conforming to IS 13592 with fittings as per IS 14735, 150 DN CI pipe conforming IS 1536 Class B with all necessary fittings, valve as per IS 14846 and clamp for fixing, providing lean concrete 1:5:10 (1 cement : 5 sand : 10 aggregate) at bottom of upflow Anaerobic Filter and Bleaching Tank, RCC M30 work in raft, Solid concrete block masonry in 1:4 cement mortar, M.S. rungs, filling of 15-25mm mm stone chips or over burnt brick bats over perforated precast slab, precast slab with lifting hooks at all elevations and depths, PCC M-20 for Screeding, 50thk. baffle conc. slab (M30), 13mm thick cement plaster 1:3 with water proofing compound, railing with knee and toe plate around the bleaching tank, grouting between pipe & bleaching tank/ Upflow Filter wall with 1:2 cement mortar (1 cement : 2 sand), reinforcement steel including straightening, cleaning, cutting, bending, keeping in proper position, centering, shuttering etc. including earthwork in excavation in all type of soils excluding soft rock and hard rock, backfilling & disposal of surplus earth / unserviceable material within a lead of 100m, all complete as per drawings, specification and directions of Engineer-incharge.

(All materials including R/F and Cement supplied by contractor) No. of Users 10 nos

(All materials including R/F and Cement supplied by contractor) No. of Users 50 nos

Supply and installation of portable Clean Agent Type extinguisher (MS body) with HFC or Fluro ketone having BIS marking as per IS 15683 having a minimum fire rating of 2A, 21B including transporting to worksite, fixing in position including all accessories and all labor and material etc. complete as per drawings, specification and directions of Engineer-in-Charge. 4kg capacity

Supply and installation of portable Clean Agent Type extinguisher (MS body) with HFC or Fluro ketone having BIS marking as per IS 15683 having a minimum fire rating of 2A, 21B including transporting to worksite, fixing in position including all accessories and all labor and material etc. complete as per drawings, specification and directions of Engineer-in-Charge. 2 kg Capacity

CIVIL, STRUCTURE AND ARCHITECTURE

WATER SUPPLY

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

25 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

15 mm nominal outer dia Pipes

20 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

15 mm nominal outer dia Pipes

20 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

ARCHITECTURE

FLOOR FINISHING

Providing and laying average 25mm cement concrete flooring in panels consisting of base course of 1:2:4 grade cement concrete (6mm down size stone aggregate) laid over sub-base of cement concrete and finishing with a layer of floating coat of neat cement slurry @ 2.75kg. of cement per Sq. M. of area including cleaning the sub-base surface, applying neat cement slurry @ 2.75 kg of cement per Sq. M. of area over the sub- base to receive the base course, compacting, tamping, trowelling, finishing, curing, providing, shuttering to the edges etc. all complete. CEMENT SUPPLIED BY THE CONTRACTOR AT THEIR COST .

25mm thk. cement concrete flooring. CEMENT SUPPLIED BY THE CONTRACTOR AT THEIR COST

Providing and laying cement concrete granolithic flooring in panels consisting of base course (under layer of 1:2:4 grade cement concrete, 6mm down size stone aggregates) laid over sub-base, wearing top- layer of cement mortar (1 cement: 3 coarse sand by volume) finished smooth by tamping, trowelling, and with a finishing floating coat of neat cement slurry @ 2.75kg. of cement per Sq. M. of area including cleaning the sub-base surface, applying neat cement slurry over the sub- base @ 2.75Kg of cement per Sq. M of area to receive the base course, compacting, tamping, trowelling, finishing, curing, providing, shuttering to the edges etc. all complete.

With average 25mm thick under-layer and 15mm thick top layer. CEMENT SUPPLIED BY THE CONTRACTOR AT THEIR COST.

50mm thick heavy duty flooring

Providing and laying average 50mm thick heavy duty flooring in panels consisting of base course of 35mm thick cement concrete (1 cement : 1.5 coarse sand : 3.5 stone aggregates of 10mm to 6mm size by volume) laid over sub-base and 15mm thick finishing layer consisting of cement and integral hardening compound mixed in ratio of 4 cement :1 hardenar (by weight) :2 stone agrgregates of 6mm and down size laid integral with base course and finished smooth including cleaning the sub-base surface, applying neat cement slurry @2.75 Kg of cement per Sq.M of area over sub-base to receive the base course, levelling, tamping, trowelling, finishing, curing, providing shuttering to the edges etc. all complete. CEMENT SUPPLIED BY THE CONTRACTOR AT THEIR COST.

Providing and laying 125mm high cement plaster skirting with 1:3 cement mortar (1 cement : 3 coarse sand by volume) finished with a floating coat of neat cement slurry @ 2.75kg. of cement per Sq.M of area including rounding of junctions with floor, preparing the wall surface, making recess in the wall, finishing, curing etc. all complete.

18mm thick. CEMENT SUPPLIED BY THE CONTRACTOR AT THEIR COST.

12mm thick. CEMENT SUPPLIED BY THE CONTACTOR AT THEIR COST.

Panel dividers in flooring/dado

P.V.C. panel dividers ( 3mm x 20mm size.)

P.V.C. panel dividers ( 3mm x 35mm size.)

Providing and laying machine cut chissel dressed kota stone slab of approved shade in floor tread, landing, riser, skirting, dado over and including a bed of cement mortar including preparing the base surface, applying neat cement slurry @ 2.75 Kg of cement per Sq.M of area to receive the mortar, providing neat cement slurry @ 4.4kg. of cement /Sq.M of area over the mortar bed, jointing each slab with neat cement paste/ grouting white cement and pigment ( conforming to IS : 2114, Table-1, matching the shade of slabs), machine cutting of the slab edges square, true & plumb finishing, grinding, polishing, finishing etc. all complete.

25mm thick kota stone slab (with tolerance +_2mm for thickness, +_2mm for length/ breadth) in floor, landing tread over average 15mm thick cement mortar 1:4(1 Cement : 4 coarse sand by volume). CEMENT SUPPLIED BY THE CONTRACTOR AT THEIR COST.

18mm thick kota stone slab in riser, dado, skirting over average12mm thick cement mortar1:3(1 cement:3 coarse sand by volume). CEMENT SUPPLIED BY THE CONTRACTOR AT THEIR COST.

Extra for providing round nosing by machine cutting of the slab.

Providing and laying tiles in flooring , dado, skirting etc. in approved colour, design and pattern, laid over and including a coating of approved adhesive as per manufacturers specifications, flush pointing of joints of tiles with cement paste/ grouting with white cement and pigment (conforming to IS:2114, Table-1, matching the shade of tiles) finishing, cleaning etc. all complete.

Ceramic, matt finished non-slip type tiles of approved make and shade(s) in approved design/ pattern including cleaning the finished surface with oxalic acid, wax polishing etc. for size 300mm x 300mm x 8mm (+5%) thick tiles for flooring.

Ceramic, matt/ glazed/ semi-glazed finished tiles of approved make & shade(s) in approved design/ pattern including cleaning the finished surface with oxalic acid, wax polishing etc. for size 300mm x 450mm x 8.5mm thick (minimum) tiles

Providing and applying pigmented (approved shade) chemical and abrasion resistant, solvent based self levelling floor coating based on epoxy resin with amine curing agents, in 2 coats @ 125 gms/sq.m. (min.)per coat by brush or spraying over a levelling screed (min. 3mm thick) of a 3 part solvent free combination of epoxy resin, amine hardeners and graded chemically inert aggregate filler, laid over a coat of 2-part epoxy resin primer applied over existing flooring etc. all as per manufacturer's specifications.

Providing and applying pigmented (approved shade) chemical and abrasion resistant, solvent based coating (on dado/wall) of epoxy resin with amine curing agents, in 2 coats @ 125 gms/sq.m. (min.) per coat by brush over plastering/ concrete surfaces including surface preparation, curing etc. all as per manufacturer's specification.

Providing and laying minimum 18mm thick approved premium quality and shade polished granite stone slabs in flooring, counters, treads, risers, skirting, dado etc. over and including a bed of cement mortar including preparing the base surface, applying neat cement slurry @ 2.75 kg. of cement per sq. mtr. of area to receive the mortar bed, jointing each slab with neat cement paste/ grout with white cement maixed with pigment (conforming to IS:2114, Table-1) to match the colour of the granite stone slabs, finishing etc. all complete.

Granite stone slabs in flooring, counters, treads etc.(perfectly levelled) over and including a bed of cement mortar 1:4 (1 cement: 4 coarse sand by volume) CEMENT SUPPLIED BY THE CONTRACTOR AT THEIR COST

Granite stone slabs in risers, skirting, dado etc. over and including a bed of cement mortar 1:3 (1 cement: 3 coarse sand by volume) CEMENT SUPPLIED BY THE CONTRACTOR AT THEIR COST.

Extra for round nosing/ moulded edges (as per approved design) to Granite stone slabs.

Providing and laying anti slip (rough)Granite stone slabs, of thickness minimum 25mm, in flooring, landing, tread, ramps over minimum 20mm thick cement mortor1:4 (1 cement :4 course sand by volume) over and including a bed of cement mortar including preparing the base surface, applying neat cement slurry @ 2.75 kg. of cement per sq. mtr. of area to receive the mortar bed, jointing each slab with neat cement paste/ grout with white cement mixed with pigment (conforming to IS:2114, Table-1) to match the colour of the granite stone slabs, finishing etc. all complete.

Cement supplied by the Contractor at there cost

Providing and fixing approved design and shade heavy duty 10mm thick 300mm x 300mm Exterior grade vitrified tiles (of ¿pavgres¿ series of ¿Kajaria¿ or approved equivalent) over and including a bed of cement mortar including preparing the base surface, applying neat cement slurry @ 2.75 kg. of cement per sq. mtr. of area to receive the mortar bed, jointing each slab with neat cement paste/ grout with white cement mixed with pigment (conforming to IS:2114, Table-1)

Cement supplied by the Contractor at there cost

Providing 3 nos. of 3mm grooves at spacing of 30mm in Kota/ Marble/ granite stone laid in stairs¿ treads/ landings all complete as per the direction of Engineer-In-Charge. (Single measurement shall be considered for 3 parallel grooves)

WOOD WORK

Wooden frames of doors, windows, ventilators Providing and fixing wooden frames of doors, windows, ventilators including cutting, shaping, jointing, applying a coat of bituminous paint on concealed surface, wood primer on exposed surface, fixing in masonry/RCC by means of 300mm x 25mm x 6mm thick M.S. hold fasts screwed to frame @ 600mm max vertically and grouted with M-15 grade concrete in min. 350mm x 100mm x 100mm sized hole made in masonry/96mm long, 12mm dia M.S. dash fastener, painting with two coats of approved shade and make (ICI or equivalent) synthetic enamel paint over approved quality primer coat, finishing etc. all complete.

Wooden frames with second class teak wood conforming to IS : 4021.

35mm thick block board flush shutter Providing and fixing Factory made, overall 35mm thick block board flush shutter consisting of solid core block board bonded with phenol phormaldehyde synthetic resin conforming to IS : 848 and faced on both faces with commercial type plywood/teakwood veneering/ lamination bonded with phenol formaldehyde synthetic resin conforming to IS : 848, including providing and fixing second class teakwood perimeter beading fixed by means of approved quality neoprene based adhesive and nailing @ 300 mm max.. painting exposed surface with two coats of approved shade and make synthetic enamel paint over approved quality primer coat, providing and fixing 125mm long M.S. butt hinges [for each shutter (vertical spacing not exceeding 600mm)] including fixing with door frame, finishing etc. all conforming to IS : 2202.

Door shutter faced with 1mm thick approved quality lamination of approved shade/brand.

Providing and fixing in position following items including all necessary fixtures, fittings, finishing etc. all complete.

Approved make heavy duty overhead hydraulic door closer with adjustable spanners, metal screws etc. conforming to IS : 3564

Approved make heavy duty hydraulically operated, adjustable floor mounted door closer conforming to IS:6315, Double action type.

Approved make pressure die cast zinc alloy, chromium plated door handle. 300 mm long.

Approved make pressure die cast zinc alloy, chromium plated door handle. 600mm long.

Approved quality 3mm thick plastic kick/push plate fixed with brass screws.

Approved quality anodized aluminium aldrop 300mm long, 19.05mm dia in bronze colour.

Approved quality anodized aluminium tower bolts conforming to IS-204 in Bronze colour, 250 x 10mm.

Approved quality anodized aluminium tower bolts conforming to IS-204 in Bronze colour, 150 x 10mm.

Approved quality zinc alloy pressure die cast, chromium plated spring loaded round door stopper with double heavy duty rubber shoes.

Approved quality 75mm long aluminium toilet door latch with vacant/occupied indicator.

Approved quality chromium plated brass coat and hat hook fixed with chromium plated brass screws.

Providing and fixing minimum 12mm thick X 50mm wide teak wood Architrave (moulding) of approved design along frames etc. including lacquer polishing/ painting matching with adjoining wood work.

STEEL/AL./GLAZED/FULLY GLASS/PVC DOORS,WINDOWS & VENTILATORS

S/F M.S. rolling shutters Supplying and fixing M.S. rolling shutters, conforming to IS : 6248 including providing all accessories like shutter (constructed with inter locking lath sections formed out of cold rolled steel strips 0.9mm thick, 80mm wide and 1.25mm thick, 80mm wide respectively for shutter width upto 3.5M and above 3.5M), jointless M.S. channel section for guide (min. 3.15mm thick), M.S. girders, pressed bottom rails, shutter suspension stud shaft with pully and cage, top rolling springs, locking arrangement etc. as per approved manufacturers drawings including painting with two coats approved make & shade and synthetic enamel paint over a coat of approved quality red oxide zinc chromate primer, making good of all damaged surfaces etc. all complete.

Motor operated rolling shutter as per approved Manufacturer's design & drawing for rolling shutters for width upto 3.5 metre with all necessary electricals like motor, switching panels, switches, cables, wires etc. as required for smooth functioning of the shutter

Motor operated rolling shutter as per approved Manufacturer's design & drawing for rolling shutters for width beyond 3.5 metre with all necessary electricals like motor, switching panels, switches, cables, wires etc. as required for smooth functioning of the shutter

Motor operated rolling shutter as per approved Manufacturer's design & drawing for rolling shutters for width upto 3.5 metre with MS grill (in place of interlocked lath sections), all necessary electricals like motor, switching panels, switches, cables, wires etc. as required for smooth functioning of the shutter

Motor operated rolling shutter as per approved Manufacturer's design & drawing for rolling shutters for width beyond 3.5 metre with MS grill (in place of interlocked lath sections), all necessary electricals like motor, switching panels, switches, cables, wires etc. as required for smooth functioning of the shutter

Fully Glass Door Providing and fixing frameless single piece Glass Doors (swing shutter) in partition made of 12mm thick toughened float glass (MODIGUARD or equivalent) single shutter with stainless steel finish patch fittings (DORMA or approved equivalent)and 150mm x 44mm extruded Aluminium frame at bottom , including all hardware such as SS patch fittings, floor spring, pivot on top, locking arrangement (EVERITE or approved equivalent make), 30mm dia, 350mm long SS pull handle ( DORMA or approved equivalent make) etc. all complete.

Etching Film on Glass Providing & applying translucent cast vinyl self adhesive washable type film with sandblasting effect (of '3M(TM) Scotchcal(TM) Frosted Crystal 7725-324' or approved equivalent) and of approved graphic design (electronic/ computer plotted & cut) having durability of 10-15 years, over glass surface in doors/ windows/ partitions etc. including preparation of base surface, cleaning, finishing etc. all complete.

Pressed steel sheet door shutter Providing and fixing pressed steel sheet door shutter made of 18 SWG galvanized pressed steel sheet bent to form hollow box of 40 mm overall thickness; and consisting of/ including: (i) 3 mm thick MS flat all along perimeter (ii) Packing the shutter with mineral wool (48 kg/cum) without gap (iii) Strengthening with 18 SWG GI vertical stiffeners @200 c/c (iv) 3 mm thick MS pad plates welded inside at required locations for fixing of hardware etc. (v) Fixing to door frame by 100 mm long SS 304 grade heavy duty ball bearing hinge @600 c/c maximum (vi) Hardware and vision panel as required. (vii) Grinding and smoothening of welding, cleaning, finishing (synthetic enamel painting/ polyurethane (PU) coating/ electrostatic powder coating), making true alignments and surfaces etc. all complete. Notes: 1. Reference shall be made to EIL standard nos. 7-75-0070, 7-75-0071 Only the net shutter(s) area shall be measured for payment

Single shutter painted with Electrostatic powder coating with following hardware: (i) Over head hydraulic door closer (heavy duty). (ii) SS 304 grade 16 mm dia 250mm long aldrop on both sides of shutter. (iii) Spring loaded heavy duty door stopper (iv) SS 304 grade 19 mm dia.200 mm long handle on both side of shutter. (v) 10 mm dia SS 304 tower bolt (250mm long for 2100mm height & 600mm long for 2500mm height)

Double shutter painted with Electrostatic powder coating with following hardware: (i) Over head hydraulic door closer (heavy duty). (ii) SS 304 grade 16 mm dia 300mm long aldrop on both sides of shutter. (iii) Spring loaded heavy duty door stopper. (iv) SS 304 grade 19 mm dia.200 mm long handle on both side of shutter. (v) 10 mm dia SS 304 tower bolt ( 250mm long for 2100mm height & 600mm long for 2500mm height) (vi) 2mm thick 25mmx 25mm GI angles (vertical) welded to each shutter at the meeting point of double shutter.

Aluminium work for doors, windows, ventilators and partition Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

For fixed portion of aluminium doors, windows, ventilators and partitions made from Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators made from Powder coated aluminium (minimum thickness of powder coating 50 micron) including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and brass cover plate of minimum thickness 1.25 mm with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.

Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut Powder coated aluminium sheet, 2.5mm thick (minimum thickness of powder coating 50 micron) and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia , at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge.

Filling gaps of size upto 5mm depth and 5 mm width in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete

Providing and fixing 255 X 19 mm adjustable friction window stays of approved quality made from Stainless Steel (SS 304 grade) with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-charge complete.

Providing and fixing 355 X 19 mm adjustable friction window stays of approved quality made from Stainless Steel (SS 304 grade) with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-charge complete.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating - 50 micron) tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc complete as per direction of Engineer-in-Charge.

Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing Powder coated minimum thickness 50 micron aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer in-charge

Providing and fixing 100 mm long aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete

Providing and fixing aluminium tower bolts of size 100mm x 10mm , ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete

Providing and fixing toughened glass panes of 6.0 mm thickness in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item)

Providing and fixing laminated glass panes of 6.3 mm thickness in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item)

Double insulated toughened glass Providing and fixing in aluminium door, window, ventilator shutters and partitions etc. 24mm thick hermetically sealed double insulated toughened glass (6mm high performance toughened glass on outside with reflective soft coating on surface of blue green shade + 12mm dry air gap by a metal spacer filled with dehydrating agent inside the unit to prevent moisture formation between the two panes +6 mm thick clear toughened glass on inside ) Glass type -GT3 performance characteristic shall be as given below or better than: (i) Light transmission : 40%-50% (ii) External Reflection : 10-20% (iii) Internal Reflection : 15%-20% (iv) Shading coefficient : <0.28 (v) Solar Factor : <=0.25 (vi) U Value : 1.5 to 1.8 W/m2 degree K with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item). The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. The glass shall be of SKN/KT series of Saint Gobain make (ECBC Compliant) or approved equivalent

Providing and fixing in position decorative Powder Coated Aluminium grill (minimum thickness of powder coating 50 micron), made of approx. 7.5 mm wide, 6mm thick sections with gapping of approx. 85 mm x 70mm maximum of approved design, pattern and make fixed to the outer frame or shutter frame of door/ window/ ventilator with C.P brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved powder coated aluminium standard section around the opening, all complete as per requirement and direction of Engineer-incharge.

P/F pressed steel door and window frames Providing and fixing pressed steel door and window frames of size (assorted size out of) Overall 125mm x 60mm section, of required profile conforming to IS: 4351, made of 16 SWG pressed steel including/ consisting of: i)3 mm thick MS flat spacers welded to frame @ 500mm c/c and at holdfast locations. ii)Filling the hollow frame section with concrete. iii)MS angle (20mmx20mmx3mm) horizontal tie member below floor finish. iv)MS holdfasts (200mmx25mmx6mm) welded to spacers. v)Fixing to masonry (by grouting the holdfasts with M-15 grade concrete in minimum 250mm x 100mm x 100mm sized hole)/ fixing to RCC (by minimum 100mm long, 12 mm dia metallic counter sunk anchor fasteners) vi)MS pad plates (40mm x 150mm x 3mm) & GI mortar guard welded to frame at hinge and other hardware locations. vii)Metering of joints between horizontal and vertical members, grinding and smoothening of welding, cleaning of frame surface, finishing (synthetic enamel painting/ electrostatic powder coating/ polyurethane (PU) coating), making true alignments and surfaces etc. all complete. Notes: 1)Reference shall be made to EIL standard nos. 7-75- 0070, 7-75-0071 2)Cumulative length of all horizontal and vertical frame members shall be measured for payment.

Frames painted with Electrostatic Powder coating.

Extra for box type transoms & mullions

P/F Gypsum Board/ Calcium silicate board Partitions Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture¿s specification and direction of engineer in charge all complete.

75 mm overall thickness partition with 12.5 mm thick double skin fire rated board conforming to IS: 2095: part I

75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum board conforming to IS: 2095: part I

PLASTERING & POINTING

Providing plain cement plaster in cement mortar (1 cement:4/6 fine sand by volume) on masonry, PCC/ RCC including preperation of base, finishing, curing etc; also including providing 20 gauge chicken wire mesh stretched tight at all RCC/ PCC and masonry meeting points in 300mm wide strips (150mm on on each surface) fixed with G.I. "U" type nails before plastering.

Plain cement plaster with waterproofing compound conforming to IS-2645 (CICO/ approved equivalent) mixed to cement mortar @ 3% by weight, Average 18mm thick 1:6 (1 cement : 6 sand) Cement supplied by the Contractor at their cost.

Plain cement plaster with waterproofing compound conforming to IS-2645 (CICO/ approved equivalent) mixed to cement mortar @ 3% by weight, Average 15mm thick 1:4 (1 cement : 4 sand) Cement supplied by the Contractor at their cost.

Plain cement plaster with waterproofing compound conforming to IS-2645 (CICO/ approved equivalent) mixed to cement mortar @ 3% by weight, Average 12mm thick 1:4 (1 cement : 4 sand) Cement supplied by the Contractor at their cost.

Plain cement plaster with waterproofing compound conforming to IS-2645 (CICO/ approved equivalent) mixed to cement mortar @ 3% by weight. Average 6mm thick 1:4 (1 cement : 4 sand) Average 6mm thick 1:4 (1 cement : 4 sand). Cement supplied by the Contractor at their cost.

Providing 20mm x 10mm Grooves in plastering in perfect straight line, plumb and uniform size throughout including finishing etc. all complete.

Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete.

ROOFING TREATMENT

PCC 1:2:4 over concrete surfaces Providing and laying cement concrete (1 cement : 2 coarse sand : 4 aggregate) over concrete surfaces, laid to slope at all heights including, finishing, curing, tamping etc. all

Cement supplied by the Contractor at their cost.

Cinder Concrete (1:10) Providing and laying Cinder Concrete (1 cement : 10 cinder of 48mm size and down grade) in all sunk areas finished with 12mm thick plain cement plaster (1 cement : 6 coarse sand by volume) including consolidating, finishing, curing, maintaining slope etc. all complete.

Cement supplied by the contractor at their cost

P/L one component PU elastomeric membrane roof treatment Providing and laying one component urethane polymers based elastomeric membrane roof treatment/ waterproofing-cum-terracing system consisting of one or more coats of urethane based high solid content elastomeric membrane (having high viscosity to give a high build film) at approx. coverage of 0.5 kg per sq.M each coat applied over and including a coat of urethane primer EMP (cured to a slightly tacky film) at a coverage of 8 Sq.M per litre by brush applied to achieve overall thickness of 1.5 mm (+ or - 15%) as per ASTM C-836/898 over all exposed roof surfaces, continued up the parapets/ walls for a minimum of 150mm over the finished roof surface, continued into rain water pipes by at least 100mm; including the preparation of the surface which shall include thorough cleaning of roof surface with a wire brush and removal of all foreign matter etc.; well defined cracks on the surface cut to ""V"" section, cleaned and filled up with a suitable mastic; sprinkling of 300 micron layer of clean sand over the final coat of PU when tacky; providing finishing protective layer of 50 mm thk. P.C.C. (1:2:4) in panels of maximum size 1200mm x 1200mm chequered finish with 24 SWG chicken wiremesh interposed in between finished smooth with joints between panels sealed with suitable urethane based elastomeric compound as per manufacturer's specifications; providing fillets of 75 mm radius with P.C.C. (1:2:4) at junctions of horizontal and vertical surfaces finished smooth; providing 450mm x 450mm khuras (rain water collecting pits) in 1:2:4 cement concrete at all outlets, levelled down by min. 25mm, finishing, curing etc. all complete as per approved manufacturer's standard specifications and recommendations.

Cement supplied by the contractor at their cost

P/L A.P.P. modified reinforced bituminous memb. waterproofing Providing and laying 4mm thick A.P.P (atactic polypropelene) modified reinforced bituminous waterproofing membrane over terrace and parapet including cleaning and preperation of the surface consisting of making good all the cracks and damages, filling potholes/ depressions, removing weak foam concrete/ plaster and refilling with same wherever required thus preparing smooth surface of the terrace; providing and applying one coat of cold applied bitumen based primer @ 0.2 to 0.4 litre per sq. mtr.; laying the membrane by torch welding over primer, providing 100mm overlaps and appropriately pressing the membrane to remove any entrapped air, including fixing on parapet after providing 10mm x 20mm continuous groove in parapet for terminating the membrane and filling the groove with polyurethane sealant and continuing this treatment at rain water outlet points; providing finishing protective layer of 35 mm thk. P.C.C. (1:2:4) in panels of maximum size 1200mm x 1200mm chequered finish with 24 SWG chicken wiremesh interposed in between finished smooth with joints between panels sealed with suitable polyurethane sealant; providing fillets of 75 mm radius with P.C.C. (1:2:4) at junctions of horizontal and vertical surfaces finished smooth; providing 450mm x 450mm khuras (rain water collecting pits) in 1:2:4 cement concrete at all outlets, levelled down by min. 25mm, finishing, curing etc. all complete as per approved manufacturer's standard specifications and recommendations.

Cement supplied by the contractor at their cost

WHITEWASHING, PAINTING & POLISHING

Providing and applying textured wall coating system consisting of twin pack fine grade silica granules/ dry flakes made of special grade of china clay/ granite type flakes of `Heritage' or equivalent in approved shade and texture; mixed in-situ with 100% acrylic polymer bonding agent; applied over plastered surfaces; the granules/ flakes etc., bonding material, mixing, method of application surface preperation etc. all shall be as per manufacturer's recommendations and specifications.

Providing and applying textured granular type wall coating.

Providing and applying min 2 mm thick white cement and polymer based wall putty (JK Wall care/ Birla Putty/ SARA or approved equivalent) over plastered surfaces (masonry wall/ RCC) and smoothening the surface with sand paper etc., preparation of surface etc. all complete as per the approved manufacturer's recommendations and directions of Engineer-in-charge.

ROOFING

Providing and fixing 40mm x 6mm M.S. flat wind ties over sheeting with anticorrosive polymer coated G.I. nuts, bolts, polymer cap, seal and thrust washers of approved make iincluding painting with two coats of synthetic enamel paint of approved make over a coat of approved quality red oxide zinc chromate primer etc.all complete.

Providing and fixing rain water pipes with M.S. holder clamps including fixing/embedding into masonry/concrete, providing connections like shoes, vents, specials, bends etc. fixing in perfect plumb etc. all complete.

110mm dia O.D. Size. exposed PVC rain water pipe jointed with bonding solution of approved quality and make with pressure rating of 4kg/cm2 including clamps, connections etc. all as per approved manufacturer's details.

160mm dia O.D. Size. exposed PVC rain water pipe jointed with bonding solution of approved quality and make with pressure rating of 4kg/cm2 including clamps, connections etc. all as per approved manufacturer's details.

110mm dia O.D. Size. embedded PVC rain water pipe jointed with bonding solution of approved quality and make with pressure rating of 4kg/cm2 including clamps, connections etc. all as per approved manufacturer's details.

160mm dia O.D. Size. embedded PVC rain water pipe jointed with bonding solution of approved quality and make with pressure rating of 4kg/cm2 including clamps, connections etc. all as per approved manufacturer's details

Providing and laying in position approved quality profiled, precoated, steel sheets (for roofing, cladding etc.) made from cold rolled high tensile Zincalume/ Galvalume Steel of 550 MPA yield stress conforming to IS:513, IS:15961 and ASTM AS: 1397; the substrate shall be hot dip metallic coating of aluminium- zinc alloy (150 grams per sq. mtr. Total on both sides, coating class AZ150); the bottom unexposed surface shall be provided with alkyd backer of minimum 5 microns over a 5 micron coat of primer; top exposed surface shall have SDP (Super Durable Polyester) paint system MINIMUM 20 microns in approved shade applied over 5 microns primer; overall coated thickness of sheets not less than 0.52 mm having base metal thickness of minimum 0.45mm (negative tolerance not acceptable), profile depth not less than 28mm and pitch of 195 to 255mm; including cutting, mitering, laps, providing cutouts for fixing accessories, necessary fastners (approved quality anti corrosive polyester polymer coated, rivets, nuts, bolts, self drilling screws/ fasteners with integral washers and EPDM seals, and nylon colour caps and natural cure type joint sealants etc.) All complete as per approved manufacturer's specifications. Note: The steel sheet shall have brand marking of coated steel manufacturer (product details, date, mfg name, etc) on back side at regular interval confirming genuinity of the material.

Providing and laying in position roofing and cladding accessories like ridge piece, corner piece, north light curve piece, apron piece, gutter, flashing etc. fabricated out of 0.5mm precoated Zincalume/ Galvalume Steel steel sheets of same material/ quality etc. as that of sheeting; bent and profiled to match with the roofing and cladding, including all cutting, fabrication, rivetting, fastners etc. all complete.

Polycarbonate sheets roofing/ cladding Providing and fixing in position (for roofing and cladding) machine made 2mm thick corrugated polycarbonate sheets (conforming to IS :14434, 14443) of approved manufacturer (in approved shade) extruded from polycarbonate resin, having profiles as approved/ matching exactly with the surrounding pre-coated roofing/ cladding sheets and having following properties: (a) Specific gravity 1.2 g/ cm3 (b) Hardness 119 M Scale (c) Tensile Strength 64 Mpa (d) Compressive strength 66Mpa (e) Impact Strength 900 J/m The item includes fixing to steel structure members (truss/ purlins)/ brick masonry walls by means of polymer coated 'J' or 'L' hooks, bolts, nuts 8mm dia G.I. bitumen washers etc. all complete as per approved manufacturer's recommendations and specifications.

Providing and fixing industrial grade wind driven turbine ventilator/ air-extractor having rotating turbine vents made of anodized aluminium (grade H24), with teflon bearings, teflon bush, teflon cap, translucent FRP base, stainless steel shaft having zero friction rotation etc. all complete as per manufacturer¿s specifications, including fixing on pitched metallic roof sheeting with required overlapping, providing supporting framework, anticorrosive polyester coated nuts, bolts, screws, sealing of all joints so that there shall not be any accumulation or leakage of water, making them waterproof etc. all complete.

approx. size 700 mm outer dia. with minimum 2500 CFM capacity

SANITARY FITTINGS & FIXTURES

Providing and fixing white glazed Earthenware Orissa pan type water closet with integral footrest of 550mmx440mm size conforming to IS : 2556, Part - III including glazed earthenware flushing cistern supported on MS brackets conforming to IS:774 of 10 litre capacity with CP brass handles,32mm dia telescopic flush pipe with fittings & clamps,15 mm dia overflow pipe with mosquitoproof net,15mm dia PVC connection pipe 450mm long,painting of all exposed metalic surfaces with 2 coats of approved shade and quality synthetic enamel paint (ICI or approved equivalent) over a priming coat of approved qualityred oxide zinc chromate, cutting walls, floors and making good of same,finishing, soldered joints, making inlet/ outlet connections,providing min. 150mm thick sand cushion, finishing etc. all complete.

Providing and fixing white glazed Earthen ware double trap, syphonic pattern wash down water closet conforming to IS : 2556 Part II including white plastic solid seat and cover conforming to IS : 2548, CP brass hinges and rubber buffers,10 litres capacity glazed Earthenware low level cistern conforming to IS:774 with internal overflow system & fittings,CP brass 40mm dia flush pipe,15 mm dia ,450mm long PVC connection pipe,ball valve, painting of all exposed matalic surfaces with 2 coats of approved shade and quality synthetic enamel paint (ICI or approved equivalent) over a priming coat of approved quality red oxide zinc chromate, cutting walls, floors and making good of same, making inlet and outlet connections, finishing etc. all complete.

Providing and fixing white glazed ceramic, flat back half stall type Urinals of 610mm x 400mm x 380mm size conforming to IS:2556 Part-VI including automatic glazed Earthenware cistern for every one 15mm dia CP brass cistern outlet 750mm long,32mm dia GI waste pipe with brass union,CP brass bottle trap,CP brass spreader,tee,distribution pipe etc.,MS brackets for cistern, painting of all exposed mettalic surface with 2 coats of approved shade and quality synthetic enamel paint (ICI or approved equivalent) over a priming coat of approved quality red oxide zinc chromate, making inlet and outlet connections, fixing with C.P. brass screws, finishing etc. all complete.

One urinal.(with 5 litre capacity cistern)

Kitchen Sink

Providing and fixing white glazed vitrous china Lab sink/kitchen sink of 610mm x 450mm x 250mm size conforming to IS : 2556, Part-V including approved M.S./C.I. brackets conforming to IS : 775, one 15mm dia CP brass bibcock, 15mm dia PVC conection, C.P. brass chain with 40mm dia GI pipe connected to floor trap with unions, painting all exposed metallic surfaces with 2 coats of approved shade and quality synthetic enamel paint (ICI or approved equivalent) over a priming coat of approved quality red oxide zinc chromate,cutting floor,Walls and making goodgood the same, making all connections, finishing etc. all complete.

Glass Shelf

Providing and fixing 600mm x 120mm x 4mm thick Glass shelf of approved quality with CP brass bracket and guard rails including fixing to wall with wooden cleats and CP brass screws, cutting walls and making good the same, finishing etc.all complete.

Towel Rail

Providing and fixing approved quality chromium plated brass towel rail of 20mm dia, 600mm length and 1.25mm thickness including fixing to wall with wooden cleats and CP brass screws, cutting walls and making good the same, finishing etc. all complete.

Soap Container

Providing and fixing approved quality chromium plated liquid soap container including fixing to wall with wooden cleats and CP brass screws, cutting walls and making good the same,finishing etc. all complete.

Providing and fixing Heavy grade Bib cocks/ stop cocks of spring loaded self closing type conforming to IS : 781 including making connections, cutting walls and making good the same etc. all complete.

15mm dia CP Brass stop cock.

15mm dia CP Brass bib cock.

Providing and fixing CP brass shower rose conforming to IS-2064:

150mm dia shower rose.

Toilet Paper Holder

Providing and fixing CP Brass Toilet paper holder of approved make with CP brass brackets including fixing to wall with wooden cleats, CP brass screws,cutting walls and making good the same, finishing etc. all complete.

Providing and fixing in position round/ oval shaped counter Hand Wash Basin with anti-splash rims, conforming to IS:2556 Part IV, to fit in exactly and neatly in the cutout in the marble/ granite stone finished R.C.C counter; one 15mm dia CP brass pillar cock, rubber plug with C.P. brass chain, 32mm C.P. waste fitting of standard pattern type with 32mm dia G.I. pipe, C.P. brass bottle trap, cutting walls, counter etc. and making good the same, also including providing cut out in marble/ granite slab counter top (and R.C.C underneath) of exact size and shape for wash basin to fit in neatly and perfectly; making all connections, finishing etc. all complete. (Marble/ Granite counter top shall be paid seperately under relevant item of `Floor Finishing')

Providing round/ oval shaped counter Wash Basin of glazed chinaware in approved colour.

Stainless steel Kitchen/ Laboratory sink

Providing and fixing stainless steel Kitchen/ Laboratory sink of approx. Size 610mm x 450mm x 200mm made of min. 1mm thick stainless steel sheet of `Salem Steel' or equivalent supported on and including M.S. brackets conforming to IS: 775; one 15mm dia C.P brass long body bib cock (if fixed to wall) or swivel type pillar cock (if fixed to counter), 15mm dia PVC/ G.I. connections to floor trap with unions etc.; painting all exposed metallic surfaces with min. 2 coats of synthetic enamel paint of approved make and shade over acoat of red oxide zinc chromate primer; cutting floor, walls, counter etc. and making good the same, making all connections, finishing etc. all complete.

17mm thick polished granite stone partitions

Providing and fixing minimum 17mm thick polished granite stone partitions (in approved quality, shade and design/ shape) with round edges for urinals including cutting walls, inserting (up to 100mm depth) and fixing the slab with Cement Mortar (1 cement : 3 coarse sand by volume), making good of all damaged work, finishing etc. all complete

round edged mirror of 6mm thick

Providing and fixing round edged mirror of 6mm thick float glass with 6mm thick waterproof marine ply backing and rounded/ beveled edging, fixed on wall with wooden cleats and CP brass screws including cutting walls/ tiles, making good the same, finishing etc. all complete.

CP Brass hand shower

Providing and fixing CP Brass hand shower (health Faucet, of Jaquar or approved equivalent ) with 8 mm Dia, 1 metre long PVC Tube and Wall hook in approved colour and finish with all necessary fittings etc. all complete.

chromium plated brass towel ring

Providing and fixing approved quality chromium plated brass towel ring of 150mm dia including fixing to wall with wooden cleats and CP brass screws, cutting walls and making good the same, finishing etc. all complete.

chromium plated brass towel rack

Providing and fixing approved quality chromium plated brass towel rack with towel rail, of 250mm width and 600mm length including fixing to wall with wooden cleats and CP brass screws, cutting walls and making good the same, finishing etc. all complete.

white glazed Earthen ware double trap, syphonic pattern wall mounted (European type) wc

"Providing and fixing white glazed Earthen ware double trap, syphonic pattern wall mounted (European type) water closet conforming to IS: 2556 Part 16 including white plastic solid seat and cover conforming to IS : 2548, CP brass hinges and rubber buffers, CP brass 40mm dia flush pipe,15 mm dia, ball valve, painting of all exposed metalic surfaces with 2 coats of approved shade and quality synthetic enamel paint (ICI or approved equivalent) over a priming coat of approved quality red oxide zinc chromate, cutting walls, floors and making good of same, making inlet and outlet connections, finishing etc. all complete.

white glazed ceramic, flat back half stall type Urinals sensor based

"Providing and fixing white glazed ceramic, flat back half stall type Urinals of 610mm x 400mm x 380mm size conforming to IS:2556 Part-VI, having electronic, battery operated sensor based flushing system of approved make and model including 32mm dia GI waste pipe with brass union, CP brass bottle trap, CP brass spreader, tee, distribution pipe etc., painting of all exposed metallic surface with 2 coats of approved shade and quality synthetic enamel paint (ICI or approved equivalent) over a priming coat of approved quality red oxide zinc chromate, making inlet and outlet connections, fixing with C.P. brass screws, finishing etc. all complete.

C.P. brass 2 way bib cock quarter turn type for health faucet

Providing, fixing, testing and commissioning C.P. brass 2 way bib cock quarter turn type for health faucet of approved make or equivalent 15 mm nominal bore, all complete as per standard design, specifications and direction of Engineer-in-charge.

C.P. brass wall mount Lavatory faucet mixer for wash basin

Providing, fixing, testing and commissioning C.P. brass wall mount Lavatory faucet mixer for wash basin of following make or approved equivalent 15 mm nominal bore, all complete as per standard design, specifications and direction of Engineer-in-charge.

Glass shelf

"Providing and fixing 600mm x 120mm x 6mm thick Glass shelf of approved quality with 'D' or 'F' bracket (Stainless Steel 202 grade) and guard rails including fixing to wall with plastic rawl plugs and SS screws, drilling walls and making good the same, finishing etc., all complete.

Providing and Fixing Concealed Flushing Cistern Size 550X95X500mm with dual flush Actuator, flush-stop function, noise less float valve and fast filling action with all component parts of high quality complete including frame for concealed cistern etc. all complete as per the instructions of the engineer-incharge.

Providing and Fixing of Flushing plate with dual knobs chrome Finish in desired shape and size for Concealed Flushing Cistern including all tools, tackles etc., all complete as per the instructions of engineer-in-charge.

FALSE CEILING, FALSE FLOORING, UNDERDECK INSULATION, PARTITIONING

Providing and fixing False Ceiling grid framework for supporting ceiling tiles consisting of main and cross runners supported from roof slab at desired height in desired pattern including finishing, making the frame work perfectly levelled and aligned etc. all complete.

Anodised (25 micron) aluminium grid framework consisting of extruded anodized aluminium ( 2.50mm thick) main runners (`T'shaped, 25mm x 35mm size), cross runners (`T'shaped 25mm x 25mm size),Wall angles including suspending the main runners @ 600mm c/c max, by means of 6mm dia M.S. hooks slotted in 25mm x 25mmx3mm thick M.S. angle fixed to roof slab with dash fasteners and connected to 3mm thick M.S. clamp (connected to main runners with 25mm long M.S. Nut) with levelling nut @ 1200mm c/c max. assembling the main and cross runners by means of aluminium angle cleats inter locking each other to forn the grid work of 600mm of 600mm size (max) fixing the aluminium wall angles with dash fastners etc. all complete.

Providing and fixing Mineral Fibre Tile false ceiling consisting of A. 600mm x 600mm x 15mm thick Mineral Fibre Acoustical tiles with durable tegular edging having noise reduction coefficient (NRC) value of min. 0.50, light reflectance value of min. 80%,thermal conductivity (K) value of 0.052-0.057 w/m deg.C and fire performance conforming to class-I as per BS-476,back of the tiles being provided with one coat of protective coating. B. Suspension system consisting of hot dipped galvanised steel main runners @ max. 1200mm c/c ( 0.33mm thk.,"T"shaped, 24mm x 38mm size with single rotary stiching), cross runners ( 0.25mm thk.,"T" shaped with double rotary stiching, 24mm x 30mm size, 1200mm long and 24mm x 25mm size, 600mm long ), perimeter sections ( 0.45mm thick,22mm x 22mm size) including suspending the system by means of 4mm dia MS wire,6mm thk. MS cleat of 25mm x 25mm size, dash fasteners and level adjustors, providing 30 micron powder coating to exposed metallic members, providing slit openings for fixing supply/return air grill, lighting fixtures, AC ducts etc. all complete.

With fine granulated surface tiles (Acoustical punchers (10mm deep) = 24000sm)

Providing and fixing partition/ panelling boards over MS framework as per desired pattern including providing cut-outs for fixing wall fixtures, conduits etc. all complete.

12.5mm thick Gypsum board panels in partition (conforming to IS : 2095, having thermal conductivity of 0.16w/mk, thermal resistance of 0.085sq.m k/w, categorised as Class-1, when tested to BS 476 Part-7) painted and screw fixed to the GI framework with 12.5mm dia dry wall screws @ 230mm c/c, including finishing the joints in the board flush with fillers, to give a smooth, seamless joints, cleaning of surfaces, fixing etc. the panels being fixed on both sides of frame work including providing and fixing Gypsum boards along the exposed edges of frame work and painting the boards with aproved shade plastic emulsion paint conforming to IS:5411.

12.5mm thick Gypsum board panels in panelling (conforming to IS : 2095, having thermal conductivity of 0.16w/mk, thermal resistance of 0.085sq.m k/w, categorised as Class-1, when tested to BS 476 Part-7) painted and screw fixed to the GI framework with 12.5mm dia dry wall screws @ 230mm c/c, including finishing the joints in the board flush with fillers, to give a smooth, seamless joints, cleaning of surfaces, fixing etc. the panels being fixed on one side of framework only and painted with approved shade plastic emulsion paint conforming to IS:5411.

5.5mm thick toughened glass panels ( conforming to IS :5437) in partitions with putty, 12mm x 10mm second T.W beading on Teak Wood frame (50mm x partition depth) fixed to MS frame work in the partition including adjustment of partition members, finishing etc. all complete.

Tray type Aluminium plank false ceiling

Providing and fixing Tray type Aluminium plank false ceiling consisting of 254/305mm x 1264mm or 600mm x 600mm size Aluminium planks (profiled for positive engagement into clip-in profiles and demounting of individual planks) manufactured out of 0.7mm thk. Aluminium alloy 3105/3005/5052 (as per ASTM 209M) with stove enamelled (coil coated) finish in approved colour and suspension system consisting of 0.5mm thk. 40mm x 20mm galvanised steel clip-in main runner profiles (@ 1264mm or 600mm as per plank size) supported by and including 0.5mm thk. 25mm x 16mm GI suspension angle,1mm thk. 25mm x 34mm x 76mm CRCA zinc plated steel ceiling brackets (@ max. 1264mm c/c or 600mm as per profile) fixed to roof slab/beam,0.5mm thk. 40mm wide, 105mm high G.I. hold on clamps slotted for level adjustment, perimeter angles including providing slit openings for fixing supply/return air grill, lighting fixtures, AC ducts etc. all complete. .

underdeck insulation consisting of rigid Polyisocyanurate foam (PIR) slabs

Providing and fixing in position underdeck insulation consisting of rigid Polyisocyanurate foam (PIR) slabs of size 1000 x 500mm and thickness of 30mm (covered on one side with glass fibre tissue/ Aluminium foil having 50mm overlap) conforming to IS:12436 having density not less than 32 kg./ Cu. M., thermal conductivity (K- value) not more than 0.023 w/mk measured at 10 deg. C; classified as 'Class I' for surface spread of flame as per BS 476, part 7; fixed to R.C.C. slab by hot blow grade bitumen of 85/25 grade or cold adhesive CPRX applied over a coat of bituminous primer @ 0.5 Litres/ Sq.M. applied to bare R.C.C. surface and to the two surface of each PIR panel and pressed in position (while the bitumen is still tacky) with the help of G.I. screws (No. 8 x 75mm long) fixed into rawl plugs (holes in R.C.C. for the rawl plugs shall be drilled prior to applying coat of bituminous primer) of size 8 x 25mm inserted (5 nos. for each slab- One each at 4 corners and one at center) and G.I washers 25mm dia; including covering the overlaps with approved quality sealing compound (MAS-94 or equivalent); chicken wire mesh 24G x 19mm shall then be fixed to G.I screws and tightened with lacing wire; including preparation of surface consisting of cleaning R.C.C surface of all dust, dirt and loose particles by wire brushing; etc. all complete as per approved manufacturer's standard specifications and recommendations.

Providing and installing/ fixing in position 600mm-1000mm high truly levelled and aligned cavity/ false flooring system having load bearing capacity of uniformly distributed load of minimum 2025 kg/ sq.m. and point load of 675 Kg., the system consisting of: (i) Sub-structure/ pedestal assembly (designed for speedy assembly/ removal for relocation/ maintenance) of zinc electro plated steel comprising of: a. 90mm x 90mm x 4mm embossed pedestal head attachment mechanically riveted to a 90mm long, minimum 19mm dia threaded bright M.S. rod stud with check nuts for level adjustment (for upto 25mm) and arresting vertical movement, anti-vibrational PVC cap (for panel and stringer location), b. CRCA (Electrical resistant welded) Pedestal of 32mm dia (OD), 2mm thick pipe mechanically reduced to four ribs at top to accommodate head assembly, mechanically locked to maintain true plumb welded to pedestal base plate. c. Pedestal Base plate 150mm x 150mm x 4mm thick (with stiffening folds) fixed/ anchored to main concrete floor @ 600mm c/c both ways (for installing flooring tiles) by means of adhesive or fastener as recommended by Manufacturer. (ii) Stringers of minimum sectional size 20mm x 32mm x 1.2mm made of hot dip galvanized steel cold rolled construction with ribs embossed on 3 sides (designed for strength, lateral stability, rolling loads and to support panels on all four sides for alignment), having counter sunk holes at both ends for fixing to pedestal head assembly with M6 machine screws. (iii) Removable and re-usable Floor panels of size 600mm x 600mm made of all steel welded construction (cleaned, degreased and phosphated with 11 tank process, finished with 40-60 micron epoxy coating (and, heated to achieve adhesion to the panel surface and corrosion resistance) with bottom surface consisting of multiple hemispherical and reverse cones and top plain sheet (fuse welded at 129 locations) to form an enclosed panel of an overall depth 37mm; the inner empty core of the panel injected with light weight fire retardant, non-combustible cementitious compound (at high pressure to fill all crevices of the panel), each panel finished on top with 2mm thick fire retardant floor grade high pressure laminate/ 2mm thick anti-static PVC tiles in approved design/ shade/ texture; fixed to flooring panel by means of approved adhesive; the edges of the finished panels provided with conductive PVC edge trim 5mm wide on all sides (mechanically locked and sealed in place). The item includes: i) Providing and fixing all accessories like screws, bolts, adhesive etc. as per manufacturer's specifications. ii) Making necessary adjustment in grid dimensions, stringer lengths, floor panel dimensions etc. at ends or centre (to cater to specific room sizes) or at panels locations, as required. iii) Cutting of floor panels as required at ends. iv) Treating the underneath cement concrete floor with one component polyurethane floor coating etc. all complete. v) Providing additional steel structural supports/ pedestal assembly at edges, cut outs etc. as required. vi) Providing all necessary accessories such as outlet boxes, grommets, Panel lifters (at least one for each building) as required etc. all complete.

False flooring panels with 2mm thick fire retardant floor grade high pressure laminate conforming to BS : 476 part - 7 on a semi-automated lamination line in approved design/ shade/ texture.

False flooring panels with minimum 10mm thick polished mirror or mat finished vitrified tiles in approved design/ shade/ texture.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recomme-nded jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer¿s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:

12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part I

12.5 mm thick tapered edge gypsum moisture resistant board

MISCELLANEOUS ITEMS

Sealing 25mm thick, 50mm wide expansion joints with premium grade two part poly-sulphide sealant (based on LP liquid sulphide) over and including primer (specially developed for use with polysulphide sealant material and as approved) and back-up materials of polyethylene strip or other bondbreaker (all as per manufacturer's specification), sealant being mixed (the base and the curing agent thoroughly mixed with slow speed electric mixer) and applied by sealant gun and `sealant application kit' including drying of surfaces before application by wire brushing, finishing etc. all complete.

Providing and laying plinth protection with Bldg. drain as per EIL STD. No. 7-75-0065 consisting of

Plinth protection of PCC (1:3:6) laid over rammed earth to slope and trowel finished. Cement supplied by the Contractor at their cost.

Building drain consisting of brick work, PCC (1:3:6) laid over rammed earth and finished with 15mm thick plain cement plaster topped with neat cement finish @ 2.75kg. of cement per Sq.M of area including finishing curing etc. all complete. Cement supplied by the Contractor at their cost.

Extra for providing 600mm long MS grating drain cover as per EIL STD No. 7-75-0065 made of 40mm x 6mm M.S. flat framework with 40mm x 6mm MS flats welded @ 35mm c/c including providing & fixing 50mm x 50mm x 6mm M.S. angle frame fixed to concrete portion of the drain.

50mm dia GI pipe spouts

Providing and fixing in position 50mm dia GI pipe spouts to slope for drainage of canopy, chajja etc., including puncturing the masonry /RCC and grouting with M-15 grade concrete, finishing etc. all complete.

Providing and laying cinder concrete filling in sunk slabs of Toilets etc. consisting of -

Average 18mm plain cement plaster (1 cement : 6 sand by volume) with waterproofing compound conforming to IS : 2645 mixed @ 3% by weight over RCC slab including preparing the base surface, finishing with one floating coat of neat cement slurry @ 2.75 Kg. of cement per Sq.M of area, including curing, finishing etc. all complete. Cement supplied by the Contractor at their cost.

Cinder concrete (1 cement : 10 cinder of 12mm size and down grade) over cement plaster including consolidating, finishing, curing, maintaining slope etc. all complete.Cement supplied by the Contractor at their cost.

Silicon/acrylic based water repellant finish

Providing and applying one coat of silicon/acrylic based water repellant finish as per aproved manufacturer's specifications on wall surfaces including filling all cracks with white cement and matching pigment cleaning the surface of all dust before evenly applying with brush, curing, drying the coated surfaces for 24 hours etc. all complete.

Transformer gates/ fencing

Providing and fixing Transformer gates/ fencing made of 50mm x 50mm x x 4.5mm M.S. tubular frame, 40mm x 40mm x 3.2mm M.S. tubular stiffeners, 50mm x 50mm x 8 gauge welded mesh fixed to the frame by 20mm x 3mm M.S. flat beading on either side, including fixing the gate and frame to the masonry/ R.C.C. by M.S. hinge arrangement (consisting of fabricated hollow M S Cylinder made of 5 Thk MS plate with 20 internal dia fixed to the shutter & RCC/masonry by means of 2 nos 6 Thk MS Flats welded on it.) with M.S. holdfast grouted with M-15 concrete block with gate having M.S. pivot arrangement (ensuring smooth operation of the gate), one heavy duty 450mm long M.S. aldrop, heavy duty M.S. tower bolts etc. including finishing of the entire gate/ fencing with fittings/ fixtures/ accessories with two or more coats of synthetic enamel paint of approved make and shade over a coat of approved red oxide zinc chromate primer, all complete as per EIL-STD No 7-75-0051 rev-04 & 7-75-0052 rev-03.(All above materials to be procured by contractor)

1000 mm high satin finish stainless steel (SS 304 grade) tubular railing

Supplying, assembling and installing 1000 mm high satin finish stainless steel (SS 304 grade) tubular railing of approved design in staircases, ramps, around floor cut outs etc. consisting of: 1. 50mm dia SS pipe top handrail 2. 32 mm dia SS pipe balusters (at every third step for staircase, @ maximum 1200mm c/c for ramp, floor cutouts) 3. 3 nos minimum 18mm dia SS pipe intermediate handrails. Including: 1. Fixing balusters to floor with 4 nos bolts änd 8mm thick, 100mm dia SS base plate & SS cap/collar. 2. Fixing top handrail to the balusters with 12mm dia SS bar connector & 6mm thick SS saddle plate. 3. Fixing intermediate handrails to the balusters with 12mm dia SS bar connector. 4. All end caps, decorative caps over balustrades,necessary bending, welding, polishing of all welded joints (Length of top handrail shall be measured for payment).

Area of front panels and door measured from floor to top rail

Area of divider/ intermediate panel measured as/actual

Steel Entrance Gates

Providing and fixing in position Steel Entrance Gates consisting of 40mm x 80mm x 3.2mm M.S. tubular frame, 80mm x 40mm x 3.2mm rectangular M.S. hollow sections & 32x32x2.6 mm MS rectangular hollow sections, both horizontal & vertical members welded to the framework and intermediate curved rectangular hollow section as per standard design, locking arrangement, 25mm thick, 75mm dia M.S. wheel with ball bearing including fixing the gate to RCC/ masonry by M.S. hinge arrangement (fabricated/ machined as per detail) and M.S. hold fast (25 x 6 x 200mm long) grouted with M-20 grade concrete, providing and fixing M.S. pivot, 50mm x 50mm x 6mm M.S. Tee bent to shape and embedded in road surface for gate opening track, gate stopper, painting the gate with approved shade and quality synthetic enamel paint (two coats) and a coat of approved quality primer, ensuring smooth operation of the gate etc. all complete as per EIL- STD-No. 7-75-0054.

LANDSCAPE CIVIL WORKS

EARTHWORK Supplying and filling in good quality earth including fine dressing to levels specified, watering, ramming consolidating and dressing etc. all complete.

HARDCORE FOR SUB BASE Providing and laying HARDCORE sub base with stone aggregate 63 to 40mm size and approved binding material including screening, sorting, spreading, packing and consolidation with half tonne roller to template etc. all complete.

GUNITED SPRAYED CONCRETE WATERPROOFING Providing and laying GUNITED SPRAYED CONCRETE WATERPROOFING (40mm thk.) in Waterbody areas consisting of mix 1:2:4 (1 cement: 2 coarse sand: 4 coarse aggregate of 10mm nominal size) over G.I. Wire mesh of approved weight per sq.m. using appropriate equipment & the following operations: a) Cleaning the surfaces where gunited concrete is to be applied, b) Fixing of G.I. wire mesh with approved fasteners on surface, c) Applying sprayed concrete d) Finishing the surface with trowel to achieve smooth finish etc. all complete.

FINISHES FOR ROAD & PARKING AREA

Providing and laying approved GRANITE COBBLE STONE (shotblasted finish, size 100x100x100mm thk. or as/ design) as per approved pattern used in drop off areas, laid over 100mm thk. PCC base & well compacted sub base/ WBM as per approved paving pattern including rubbing, polishing and grout etc. all complete.

Providing and laying of approved INTERLOCK PAVERS (rough finish with solar reflectance index value higher than 0.5, size 100x200x80mm or as/ design) in road and parking area bands, laid over 100mm thick sand base over well compacted subbase/ WBM and mortar with joints filled in fine sand as per manufactured requirements etc. all complete.

Supplying and laying CONCRETE INTERLOCKED GRASS PAVERS laid over 100mm thk. sand base over well compacted subbase/ WBM and mortar with joints filled in fine sand as per manufactured requirements etc. all complete.

Supplying and laying of POLYCARBONATE GRASS TRACK PAVERS (Ovilite or equivalent) with self anchoring pegs, made of high impact resistant HDPE. The base of the panel is equipped with a slot opening for drainage. The grass paver to have interlock system to lock each other and should have compressive strength of minimum 150 tons/sq.m., capable to take the load of the fire tender, should have high level of porosity greater than 90%, porous for grass, shrubs and low planters laid over 50mm sand bed over well compacted subbase/ WBM as per manufacturer specifications etc. all complete.

CLADDING AND COPING

Providing and fixing approved GLASS MOSAIC TILES (Color - Shades of blue, Size - 20x20x6mm or as/ design, Bisazza or equivalent) used in waterbodies, fixed with approved low VOC content adhesive including rubbing, polishing and grout etc. all complete.

MISCELLANEOUS FINISHES

Providing & laying 50-70mm dia polished white Indian MARBLE PEBBLES laid loose in layers including rubbing, polishing, etc. all complete.

Providing and applying approved EPOXY PAINT of required shade on steel work (two or more coats) as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. all complete.

PERGOLA/ TRELLIS

Providing and fixing of STAINLESS STEEL SECTIONS (Size of members- 30x30,50x100mm, 75x100mm, 75x150mm, 100x200, 150x150, 150x300mm or as/ design) for pergola framework covered with 2mm dia S.S. wiremesh fixed with frame including cutting, hoisting, fixing in position using structural steel etc. all complete as required.

CLADDING,FACADES ETC.

Providing and fixing in position minimum 25mm thick granite stone (in dry cladding) of uniform colour and size by means of Stainless steel clamps (of Hilti/ approved equivalent make) of minimum weight 250 gms and of minimum 5mm thickness with various offset lengths from 50-65mm and 80-120mm, fastening the clamps with ETA approved universal anchors and pins etc. (of Hilti/ approved equivalent make) for fixing/ anchoring in masonary/ RCC using sufficient number of clamps/ anchors/ pins all as per approved manufacturer's standard details and fixing sequence/ methodology to ensure stable cladding system (with a guarantee for a time span of not less than 15 years) including sealing the joints with polyurethane based adhesive sealant ('SIKAFLEX 11FC of SIKA India Pvt. Ltd' or approved equivalent) and applying one or more coats of Silicon based water repellant coat ('SIKAGUARD 703W of SIKA India Pvt. Ltd' or approved equivalent) on front side of the stone cladding incl. cost of scaffolding etc. complete in all respect for all heights as per the instruction of Engineer-in-charge.

Granite stone dry cladding with clamps of 304 hybrid grade (of Hilti/ approved equivalent make).

Providing, supplying and installing at site Glass Reinforced Concrete (GRC) Claddings, made up of mainly White Cement (conforming to ASTM C 150), High Silica sand (conforming to ASTM c144), AR Glassfibre, Admixtuers (conforming to ASTM c260,ASTM c618), by using Spray Process and as recommended by PCI (Precast Institute) USA, Manual 128 (edn4) or as per GRCA International specifications with design as per details provided in drawings and site requirements/ measurements and as per approved finish and color shade, with sealers and hardwares required, all in accordance with the manufacturer's specifications and conforming to Indian/ ASTM standards, along with submission of shop drawings for approval, complete in all respects.

Providing, supplying and installing at site Glass Reinforced Concrete (GRC) Jallis (Grills), made up of mainly White Cement (conforming to ASTM C 150), High Silica sand (conforming to ASTM c144), AR Glasfibre, Admixtuers (conforming to ASTM c260,ASTM c618), by using Vibration Cast Premix Process and as recommended by PCI (Precast Institute) USA, Manual 128 (edn4) or as per GRCA International specifications with design as per details provided in drawings and site requirements/ measurements and as per approved finish and color shade, with sealers and hardwares required, all in accordance with the manufacturer's specifications and conforming to Indian/ ASTM standards, along with submission of shop drawings for approval, complete in all respects.

Providing and erecting/ fixing/ installing in position aluminium composite panels system (for external application) of 'Alucobond'/ 'Eurobond'/ 'Reynobond' or approved equivalent comprising of aluminium framework consisting of 40mm x 40mm x 4mm thick x 100mm long aluminium angle cleats (bracket) suitably spaced and placed to comply to design/ elevation/ colour pattern etc. and fixed to masonry/ RCC column/ beam of the building by means of M8 x 65mm long G.I Anchor bolts, aluminium continuous vertical angle 40mm x 40mm x 4mm fixed/ bolted to angle cleats by means of M8 x 25mm long nut and bolt arrangement, suitable horizontal aluminium angle horizontal members as required; cladding panels 4mm thick (overall thickness) made of high quality extrusion grade LDPE/ LLDPE core material (3mm thick) sandwiched between 0.5mm thick aluminium foil (on either side) made of aluminium alloy 1100-H18 or approved equivalent and finished with minimum 35 micron (5 micron primer and 25 micron top coat) thermoplastic PVDF layer 'Kynar 500' (minimum 70%) and polyester coating in approved shade; all complete including providing approved silicon sealant at all joints, necessary accessories like backing rods, aluminium pop rivets, bolts, screws, corner pieces etc. as required for the completion of the work as per the approved manufacturer's specifications and recommendations, cleaning, finishing etc., all complete.

Extra for top hung open out (openable) window panel Extra over structural glazing for providing and fixing top hung open out (openable) window panel including providing and fixing of two point locking handles of approved design, heavy duty aluminium approved quality hinges with concealed 4 points peg stay of aluminium or heavy duty friction stay of approved make suitable to withstand the required wind pressure and shutter loads all fittings and fixtures to be concealed except hinges/stay and handle, complete in all respects with necessary hardware and fittings such as friction hinges, lockable handles etc.of approved make. (Weight of aluminium frame, excluding rough ground, shall be taken as 3.0 Kg. Per sq m)

Fire rated Doors/ Windows and Partitions

P/F Fire rated Single glazed door with panic bar Providing and fixing 2 hours fire rated, fully glazed, single shutter doors consisting of steel door frame, shutter including stiles, rails, insulation, transparent glass, sealant and hardware such as hinges, panic bar, locks/ trims for panic bar, door closer, door stopper, concealed flush bolt including fixing with masonry, partition etc. all complete as per Specification and approved Manufacturer's details.

P/F Fire rated Double glazed door with panic bar Providing and fixing 2 hours fire rated, fully glazed, double shutter doors consisting of steel door frame, shutter including stiles, rails, insulation, transparent glass, sealant and hardware such as hinges, panic bar, locks/ trims for panic bar, door closer, door stopper, concealed flush bolt including fixing with masonry, partition etc. all complete as per Specification and approved Manufacturer's details.

Fire rated Single Steel door without panic bar Providing and fixing 2 hours fire rated, single shutter steel doors consisting of steel door frame, shutter, vision panel, insulation and hardware such as hinges, door closer, motice lock, handle, door stopper including fixing with masonry, partition etc. all complete as per specification and approved Manufacturer's details.

Fire rated Double Steel door without panic bar Providing and fixing 2 hours fire rated, double shutter steel doors consisting of steel door frame, shutter, vision panel, insulation and hardware such as hinges, door closer, motice lock, handle, door stopper including fixing with masonry, partition etc. all complete as per specification and approved Manufacturer's details.

Fire rated Single Steel door with panic bar Providing and fixing 2 hours fire rated, single shutter steel doors consisting of steel door frame, shutter, vision panel, insulation and hardware such as hinges, panic bar, locks/ trims for panic bar, door closer, door stopper, concealed flush bolt etc. including fixing with masonry, partition etc. all complete as per specification and approved Manufacturer's details.

Fire rated Double Steel door with panic bar Providing and fixing 2 hours fire rated, double shutter steel doors consisting of steel door frame, shutter, vision panel, insulation and hardware such as hinges, panic bar, locks/ trims for panic bar, door closer, door stopper, concealed flush bolt including fixing with masonry, partition etc. all complete as per specification and approved Manufacturer's details.

Fire rated glazed partition Providing and fixing 2 hours fire rated, glazed partition of desired design consisting of steel frame, insulation and transparent glass and glazing beading, matrix mineral boards, intumescent putty, fire resistant acrylic sealant etc. all complete including preparing fabrication/ installation drawings including fixing with masonry, partition etc. all complete as per specification and approved Manufacturer's details.

MISCELLANEOUS ITEMS

Aluminium louvered window/ventilator of minimum 2mm thick, overall 75mm wide approved shade electrostatically powder coated Aluminium sheet louvers fixed @ 50mm, bend to shape including providing minimum 3mm Aluminium sheet side members for framing the louvers including fixing the louver-frame to window/ ventilator frame, providing all accessories etc. all complete, all members (louvers, louver frame, window/ventilator frame etc.) being of Aluminium and of similar electrostatically powder coating finish.

Supply, Installation, Testing and Commissioning of Horizontal Type Industrial Grade Air-Curtain with removable washable filter (warranty in the name of Owner) suitable for air-conditioned premises to be installed on the wall above Doors of desired width upto 3.0m along with necessary supporting arrangement including mounting bracket and fasteners etc., as per the following specifications: Power supply of 230 V AC, 50Hz, housing made up of durable Stainless steel (SS), Sound level not more than 68 dB when measured at 1m from source, having air discharge velocity of minimum 10 m/sec and air flow rate more than 1200m3/hr, equipped with overload protection, two speed control motor (copper winding) with operation of speed control by external switch, automatic on and off operation through photo-sensor when door is being opened and closed, Sensor (photo-sensor) supply, installation as required along with supply of 1 no. of spare sensor, removal front panel for easy installation and maintenance, including all tools, tackles, accessories, fixing at designated location above the door, etc. all complete as per specifications and instructions of the engineer-in-charge.

Providing and fixing Stainless steel plate 304grade of 1.50mm thick, including writing with Embossing of letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of engineer-in-charge.

Supplying and fixing of Pictogram of brush finish over steel plate depicting man/ woman in square shape of size 150 x 150 x 2mm thick (of approved make) etc. all complete as per direction of Engineer In-charge.

Supply and installation of 88mm x 426mm x 2mm thick signage with L bracket indicating "WASH ROOMS" in letters and suspended from ceiling with necessary hardware etc. all complete as per the direction of Engineer In-charge.

Supply & Fixing of manufactured factory made sandwich panel in roofing having Minimum 50mm thick Trapezoidal Noncombustible Stone wool core /Euro Class A1per EN 13501-1 having density 100 + 4 kg per cum as per IS 8183 , Melting point > 1000 degree Celsius as per ASTM E794 3, Thermal conductivity -0.040 W/mk , when tested in accordance with ASTM C518 , having U value 0.80 (W/m2K). Both side of panel elements shall be made of 0.50 mm thick steel facers with minimum yield Stress of 300 N/mm2 Coated with Aluminium - Zinc Alloy Coating AZ150 (150 gms/m2) having micro ribbed profile on both sides conforming to IS 15965:2012. The color coating should be of approved color at least 25-micron polyester coating including 5-7 micron primer in exposed surface and back coat 10-12 micron including 5-7 micron primer, with guard film for internal & external facers and further Color coated with super durable polyester (SDP) paint coat with guard Film. The external facers to have trapezoidal ribs at every 250 mm centers having rib height of 35 mm. The Internal sheet shall be microribed. Panel side laps are designed to ensure continuous insulation with complete weathertight performance achieved through anti capillary groove & sealants. Self-drilling fasteners shall be corrosion resistant plated steel with EPDM washer or Aluminum pop rivets. Size of the fasteners /rivets shall be as per design. Panels shall be engineered to provide required fastener by using appropriate flashings along with silicon sealant wherever applicable. All the operation including Structural support required to fix the panels is included in the scope and shall be completed in all respect as per drawings, Manufacturer’s specifications and direction of Engineer-in-Charge.

Supply & Fixing of manufactured factory made Sandwich panel in cladding having Minimum 50mm thick Non-combustible Stone wool core /Euro Class A1 per EN 13501-1 having density 100 + 4 kg per cum as per IS 8183 , Melting point > 1000 degree Celsius as per ASTM E794 3. Thermal conductivity -0.040 W/mk , when tested in accordance with ASTM C518 having U value 0.80 (W/m2K).Both side of panel elements are made up of 0.50 mm thick steel facers with minimum yield Stress of 300 N/mm2 Coated with Aluminium - Zinc Alloy Coating AZ150 (150 gms/m2) having micro ribbed profile on both sides conforming to IS 15965:2012. Panels shall have a compressive stress of 57 kPa .Shear Stress of 27 kPa when tested in accordance with EN 12090. when tested according to EN826 The color coating should be of approved color at least 25-micron polyester coating including 5-7-micron primer in exposed surface and back coat 10-12 micron including 5-7-micron primer, with guard film for internal & external facers and further Color coated with super durable polyester (SDP) paint coat with guard Film. The external & Internal finish sheet shall be micro-ribed. Selfdrilling fasteners shall be corrosion resistant plated steel with EPDM washer or Aluminum pop rivets. Panel shall be fixed vertically fixed with tongue N groove joint. Panels shall be engineered to provide required fastener by using appropriate flashings along with silicon sealant wherever applicable. All the operation including Structural support required to fix the panels is included in the scope and shall be completed in all respect as per drawings, Manufacturer’s specifications and under the overall direction of Engineer-in-Charge.

Providing and fixing U Baffle Aluminium panel ceiling of approved Wooden Finish MWBN colour consisting of panel size 150mm deepX50 mm width using 0.7m thick, panelling upto 4mtr,Coil Coated on a Continuous Paint Line, Double baked and roll for med from enamelled corrosion resistance Aluminium alloy AA3005(Al.Mg) for higher strength and good roll forming characteristics. Panels shall be clipped to a baked enamelled Aluminium carrier of 30 mm wide x 47mm high x 0.5mm thick, Black Colour coated, one leg of the carriers with cutouts to hold the panels in a module of 200mm.Panel carrier shall be suspended by means of threaded rod at a distance of 1.8mtr c/c. The baffle shall be manufactured on high speed, high precision roll forming machine with ARKU SIX Hi configuration roller levelling process to ensure the flatness and to avoid the failure of metal at corners which may occur normally on press brake machine. Paint Finish: Aluminium panels shall be chromatised for maximum bond between metal and paint enamelled twice under high temperature, Exposed side with a full primer and finish coat on a Continuous Paint Line. Ceiling Finish above U Baffle Ceiling: Ceiling area above U Baffle to be painted in black colour before fixing this system. The baffle ceiling system should meet the required standards for Green Pro certification and should qualify as green product as per CII green products and services council. The manufacturer should be ISO9001:2015 Quality Management System Certification compliant with in house testing facility and should have their own manufacturing plant in India. Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc.

Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laidon 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

Providing and laying waterproofing cum insulation system over roof consisting of: a) one coat of polyurethane primer @6-8 sq m area/ Litre over prepared roof surface, b) minimum 1.5mm DFT polyurethane water proofing coating applied by spray or brush (in minimum two layers, with scrim cloth reinforcement in between the layers) c) 40 mm thick polyurethane foam insulation applied in layers with spraying machine over the primer coat, d) minimum .8 mm DFT polyurethane water proofing coating applied by spray or brush (in minimum two layers, with scrim cloth reinforcement in between the layers) e) 150 GSM Geo textile membrane overcured Polyurethane water proofing coating f) finishing protective layer of minimum 50 mm thick PCC (1:2:4, inpanels of maximum size 2500mm x 2500mm, chequered finish, reinforced with 24 G wire netting, laid in slope), (PCC thickness more than 50 mm shall be paid extra) all including cleaning and surface preparation of the roof surface, providing 75mm radius fillets with P.C.C. (1:2:4) at junctions of horizontal and vertical surfaces finished smooth; 450mmx 450mm khuras (rain water collecting pits) at all outlets, testing for water leakage, scrim cloth reinforcements at junction of horizontal and vertical surfaces and also nearopenings for rainwater pipes/ outlets,continuing the waterproofing up the parapets/ walls for a minimum of 150mm over the finished roof surface, continuing into rainwater pipes by at least 100 mm etc, supply of all materials, finishing, curing etc. all complete as per job specification, drawings and directions of Engineer-In-Charge

Providing & fixing at all heights and locations Letters made up of Stainless steel, grade 316 of approved make made out of laser cut shape in required design, language & font, including buffing, polishing and fixing by sufficient numbers of fasteners/ high quality chemical tape/ adhesive/fastener of approved make, all complete as per architectural drawings and direction of Engineer in charge. Hollow letters made of SS sheet of 1.5 mm thickness a) letters with depth of 50 mm

Providing & fixing at all heights and locations Letters made up of Stainless steel, grade 316 of approved make made out of laser cut shape in required design, language & font, including buffing, polishing and fixing by sufficient numbers of fasteners/ high quality chemical tape/ adhesive/fastener of approved make, all complete as per architectural drawings and direction of Engineer in charge. Hollow letters made of SS sheet of 1.5 mm thickness a) letters with depth of 75 mm

CIVIL, STRUCTURE AND ARCHITECTURE

WOOD AND P. V. C. WORK

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.

Providing and fixing to existing door frames.

30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.

FLOORING

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).

Size of Tile 600x600 mm

Size of Tile 1000x1000 mm

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.

Size of Tile 600x600 mm

Size of Tile 1000x1000 mm

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).

Size of Tile 600x600 mm

Size of Tile 1000x1000 mm

FINISHING

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification.

Two or more coats on new work

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :

Water thinnable cement primer

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.

New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

One coat

Two coats

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.

With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done and this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time)

Supply of following Manpower for exclusive service to B AND R as per experience mentioned in Contract Agreement bertween BANDR and BPC and direction of Engineer-in-charge.

Lead Engineer (4no. For 10 month)

Discipline Engineer ( 6 nos. for 10 month)

Lead Safety Officer (1 no. for 10 months)

Supervisor ( 6 nos. for 10 months)

Multi Tasking Staff(1 no. for 10 months)

"NOTE:- THE ABOVE RATE SHALL BE INCLUSIVE OF ALL TAXES & DUTIES, ROYALTIES, CESS, FEE, ENVIORMENTAL & POLLUTION, FITNESS & SAFETY CLEARANCE CHARGES (IF ANY), OR ANY OTHER INCIDENTAL CHARGES ETC BUT EXCLUDING GST."

Please Enable Macros to View BoQ information